Search Results

Search found 892 results on 36 pages for 'mirror'.

Page 33/36 | < Previous Page | 29 30 31 32 33 34 35 36  | Next Page >

• Pxe net install Centos with Static IP

  - by Stu2000

  I seem to be unable to perform a kickstart installation of centos5.8 with a netinstall. It correctly gets into the text installer, but keeps sending out a request for the dhcp server and failing. I have tried to manually set the IP everywhere. Here is my pxelinux.cfg file DEFAULT menu PROMPT 0 MENU TITLE Ubuntu MAAS TIMEOUT 200 TOTALTIMEOUT 6000 ONTIMEOUT local LABEL centos5.8-net kernel /images/centos5.8-net/vmlinuz MENU LABEL centos5.8-net append initrd=/images/centos5.8-net/initrd.img ip=192.168.1.163 netmask=255.255.255.0 hostname=client101 gateway=192.168.1.1 ksdevice=eth0 dns=8.8.8.8 ks=http://192.168.1.125/cblr/svc/op/ks/profile/centos5.8-net MENU end and here is my kickstart file: # Kickstart file for a very basic Centos 5.8 system # Assigns the server ip: 192.211.48.163 # DNS 8.8.8.8, 8.8.4.4 # London TZ install url --url http://mirror.centos.org/centos-5/5.8/os/i386 lang en_US.UTF-8 keyboard us network --device=eth0 --bootproto=static --ip=192.168.1.163 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=8.8.8.8,8.8.4.4 --hostname=client1-server --onboot=on rootpw --iscrypted $1$Snrd2bB6$CuD/07AX2r/lHgVTPZyAz/ firewall --enabled --port=22:tcp authconfig --enableshadow --enablemd5 selinux --enforcing timezone --utc Europe/London bootloader --location=mbr --driveorder=xvda --append="console=xvc0" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work part /boot --fstype ext3 --size=100 --ondisk=xvda part pv.2 --size=0 --grow --ondisk=xvda volgroup VolGroup00 --pesize=32768 pv.2 logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=528 --grow --maxsize=1056 logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow %packages @base @core @dialup @editors @text-internet keyutils iscsi-initiator-utils trousers bridge-utils fipscheck device-mapper-multipath sgpio emacs Here is my dhcp file: ddns-update-style interim; allow booting; allow bootp; ignore client-updates; set vendorclass = option vendor-class-identifier; subnet 192.168.1.0 netmask 255.255.255.0 { host tower { hardware ethernet 50:E5:49:18:D5:C6; fixed-address 192.168.1.163; option routers 192.168.1.1; option domain-name-servers 8.8.8.8,8.8.4.4; option subnet-mask 255.255.255.0; filename "/pxelinux.0"; default-lease-time 21600; max-lease-time 43200; next-server 192.168.1.125; } } Is it impossible to prevent it asking for a dynamic ip before trying to install from the net? Perhaps there is an error in of my files? My dhcp server is set to ignore client-updates, and is set to only works with one mac address whilst testing.

  Read the article

• Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

  - by Anon

  We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

  Read the article

• Upgrading php from php 5.3 to 5.4 .7

  - by Takingsides

  So, quickly so to speak I have noticed this topic around, I have searched and there are plenty of solutions. However these solutions do not work for me, not only that but I'm intending to learn more about the Debian based OS. Questions I would like to know how to upgrade php5.3 to php 5.4.7 compiling it from source, myself without using a third-party ppa. Is the way (explained below) the correct way of configuring php5.4? I'm new to compiling from source. Set-up I run Ubuntu Server 12.04 64bit. I've currently got: PHP 5.3 MySQL-Server Apache2 Memcached The Problem So I initially installed php5.3 using apt-get. I now wish to upgrade the php 5.4 due to the advantage of traits in OOP and the struct with Arrays and all the other recent patches and such. Possible Solutions I've seen this ondrej/ppa repository, which I refuse to use, given the fact that it may work, but it's an unknown/untrusted source. ALso, i'm not learning how to administer from source, using configure, make and install accordingly. I've seen a solution compiling from source, which is essentially how I was hoping to go about it with some guidance. Conclusion So I didn't just expect to be spoon-fed, and I went out and did some manual reading and atleast started the ball rolling myself; this how far i've got. The first thing I did was su into root (to save the typing sudo all the darn time). $ sudo su The next thing I did was download the latest version of php (5.4.7) and extracted it's contents ready to configure before installing it. $ mkdir php5-new && cd !$ $ wget -O php-5.4.7.tar.bz2 http://php.net/get/php-5.4.7.tar.bz2/from/uk3.php.net/mirror $ bzip2 -d php-5.4.7.tar.bz2 $ tar xvf php-5.4.7.tar.gz $ cd php-5.4.7 $ ./configure --help Finally I decided to have a bash, I looked through the list of options and decided I needed to list ALL of the things I wanted to include in the configuration. $ ./configure --with-mysql --with-apache2 --with-libxml --with-openssl --with-zlib --with-bz2 --with-curl --with-dom --with-gd --with-imap --with-imap-ssl --with-mcrypt --with-mysqli --with-pdo-mysql --with-libxml --enable-ftp --enable-mbstring --enable-soap Finally, the results... When the configuration process had finished, it threw an error: configure: error: xml2-config not found. Please check your libxml2 installation.

  Read the article

• What the best way to recover from when your RAID H/W incorrectly thinks a disk is missing

  - by Software Monkey

  I have a Windows 7 system with an MSI motherboard (running the latest AMD BIOS) and two of my four disks (not the system boot disk) configured via the Mobo as RAID-1. After a normal system restart today, the RAID BIOS reports that one of the two drives has been disconnected or has failed. It's not really failed; via recovery tools I can verify that if I take the BIOS out of RAID mode. But I can find no way to re-add the second hard disk to the array and rebuild via the BIOS - the only option seems be to delete the array and recreate it, but I've done that once before and it blows away the disk. It's done this once before, however on a subsequent reboot after double-checking the drive cabling (but not changing anything) and it boot up fine. So I think the mobo RAID is a little bit flaky. At this point I would like to remove the RAID drivers, change to AHCI mode and switch over to using a Windows 7 dynamic mirror disk. But the RAID drivers seem somehow deeply bound into the Windows startup - I can't find anything like the good ol' safe-mode in Windows 7. If I boot from the Win 7 install disk in ACHI mode I can use recovery tools to log in to the Windows 7 installation, so the boot drive it seems fine with ACHI mode. Additionally, I can see all my other disks, run chkdsk on them and they seem to be fine. If I try to boot from the HDD in AHCI mode, it just reboots part way through, presumably because the RAID drivers load and conflict with the BIOS being set to AHCI. So: How do I strip the RAID drivers from my Win 7 installation? If I delete the RAID logical disk, will it really delete partitioning information, or is that just a poorly worded message when it says the data on the disk will be deleted? If I disconnect the 2 disks in a RAID array, then delete the logical disk array, and then reconnect and reboot still in RAID mode, will the disks simply revert to RAID single-disks like my other 2 and then maybe I can leave windows with RAID drivers by operate the disks as singles with 2 of them in a Windows dynamic disk mirrored setup? Does Windows 7 have anything like the Windows XP Repair Install, where it will reinstall the O/S binaries from CD, but leave apps and setup alone. I am really hoping I don't have to do a complete reinstall of Windows 7 - the last one, when I upgraded from XP, took me two days to get everything set up and installed.

  Read the article

• Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

  - by Mindful

  Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails. UPDATE: here's my Grub.Conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd1,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda1 default=0 timeout=5 splashimage=(hd1,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.30.10-105.2.23.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.10-105.2.23.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.10-105.2.23.fc11.i686.PAE.img title Fedora (2.6.30.9-102.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.9-102.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.9-102.fc11.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img title Fedora (2.6.27.21-170.2.56.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.21-170.2.56.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.21-170.2.56.fc10.i686.img title Fedora (2.6.27.19-170.2.35.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.19-170.2.35.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.19-170.2.35.fc10.i686.img title Upgrade to Fedora 10 (Cambridge) kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=http://chi-10g-1-mirror.fastsoft.net/pub/linux/fedora/linux/releases/10/Fedora/i386/os/images/install.img ks=hd:UUID=f11769ba-29bc-46de-8c40-a949720a438e:/upgrade/ks.cfg initrd /upgrade/initrd.img title Win rootnoverify (hd0,0) chainloader +1

  Read the article

• MS DPM 2007: Testing the Recovery for a Production Domain

  - by NewToDPM

  Hi everybody! MS DPM 2007 is a new technology in my company, and so am I to the product. We have a classic Microsoft domain with two DCs, Exchange 2007 and a couple Web/MS SQL servers. I have deployed DPM one month ago on the domain, and after fixing the various issues I got with the replicas inconsistence and adapting the schedule and retention range to the server storage pool size, I can say the backup system is working correctly (no errors) as of today. However, there is one problem: we did not attempt to restore from the backups yet, which is a big no-no of course. I'm not sure about the way I should handle this, my main concern being Exchange and the System State of the DCs. From my understanding, DPM can only protect AND restore data on a server which is part of the same domain as the backup server. If I restore the System State (containing Active Directory) and the Exchange Storage Groups on a testing server, I am afraid it would completely disturb the domain functioning (for example, having two primary DCs on the domain). I am thinking about building a second DPM server on a testing separate domain which would mirror the replicas and then restore it on testing servers from this new domain. Is it the right way to handle the data recovery testing? How did you do on your domain when you first deployed DPM? I'd be grateful for any link/documentation or advice. Thank you in advance for your help! EDIT: Two options seem possible so far: i. Create another DC/Exchange server in the alternate location; ii. Create a separate domain in the alternate location and setup a trust between this domain and the production one. The option i is certainly the best but implies setting up a secondary Exchange server, with a dedicated public IP address so that if Exchange #1 dies, we can still send emails with Exchange #2. I don't know how complex this can be and would need to discuss it with my colleagues. The option ii would only fit the testing purposes. My only question regarding this is: if my production and DPM servers are part of domain A, and there is a trust between domains A and B, can I restore a domain A content to any domain B server?

  Read the article

• SQL Express 2008 R2 on Amazon EC2 instance: tons of free memory, poor performance

  - by gravyface

  The old SQL Express 2005 was running on a low-end single Xeon CPU Dell server, RAID 5 7200 disks, 2 GB RAM (SBS 2003). I have not done any baseline measurements on the old physical server, but the Web app is used by half a dozen people (maybe 2 concurrently), so I figured "how bad can an Amazon EC2 instance be?". It's pretty horrible: a difference of 8 seconds of load time on one screen. First of all, I'm not a SQL guru, but here's what I've tried: Had a Small Instance, now running a c1.medium (High Cpu Medium) Windows 2008 32-bit R2 EBS-backed instance running IIS 7.5 and SQL Express 2008 R2. No noticeable improvement. Changed Page File from fixed 256 to Automatic. Setup a Striped Mirror from within Disk Management with two attached 1 GB EBS volumes. Moved database and transaction log, left everything else on the boot EBS volume. No noticeable change. Looked at memory, ~1000 MB of physical memory free (1.7 GB total). Changed SQL instance to use a minimum of 1024 RAM; restarted server, no change in memory usage. SQL still only using ~28MB of RAM(!). So I'm thinking: this database is tiny (28MB), why isn't the whole thing cached in RAM? Surely that would speed up performance. The transaction log is 241 MB. Seems kind of large in comparison -- has this not been committed? Is it a cause of performance degradation? I recall something about Recovery Models and log sizes somewhere in my travels, but not positive. Another thing: the old server was running SQL Express 2005. Not sure if that has any impact, but I tried changing the compatibility level from SQL 2000 to 2008, but that had no effect. Anyways, what else can I try here? Seems ridiculous to throw more virtual hardware at this thing. I know I/O is going to be rough on EBS volumes, but surely others are successfully running small .NET/SQL apps on reasonably priced instances?

  Read the article

• EXC_BAD_ACCESS and KERN_INVALID_ADDRESS after intiating a print sequence.

  - by Edward M. Bergmann

  MAC G4/1.5GHz/2GB/1TB+ OS10.4.11 Start up Volume has been erased/complete reinstall with updated software. Current problem only occurs when printing to an Epson Artisan 800 [USB as well as Ethernet connected] when using Macromedia FreeHand 10.0.1.67. All other apps/printers work fine. Memory has been removed/swapped/reinstalled several times, CPU was changed from 1.5GB to 1.3GB. Page(s) will print, but application quits within a second or two after selecting "print." Apple has never replied, Epson hasn't a clue, and I am befuddled!! Perhaps there is GURU out their who and see a bigger-better picture and understands how to interpret all of this stuff. If so, it would be a terrific pleasure to get a handle on how to cure this problem or get some A M M U N I T I O N to fire in the right direction. I thank you in advance. FreeHand 10 MAC OS10.4.11 unexpectedly quits after invoking a print command, the result: Date/Time: 2010-04-20 14:23:18.371 -0700 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: FreeHand 10 Path: /Applications/Macromedia FreeHand 10.0.1.67/FreeHand 10 Parent: WindowServer [1060] Version: 10.0.1.67 (10.0.1.67, Copyright © 1988-2002 Macromedia Inc. and its licensors. All rights reserved.) PID: 1217 Thread: 0 Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0x07d7e000 Thread 0 Crashed: 0 <<00000000>> 0xffff8a60 __memcpy + 704 (cpu_capabilities.h:189) 1 FreeHand X 0x011d2994 0x1008000 + 1878420 2 FreeHand X 0x01081da4 0x1008000 + 499108 3 FreeHand X 0x010f5474 0x1008000 + 971892 4 FreeHand X 0x010d0278 0x1008000 + 819832 5 FreeHand X 0x010fa808 0x1008000 + 993288 6 FreeHand X 0x01113608 0x1008000 + 1095176 7 FreeHand X 0x01113748 0x1008000 + 1095496 8 FreeHand X 0x01099ebc 0x1008000 + 597692 9 FreeHand X 0x010fa358 0x1008000 + 992088 10 FreeHand X 0x010fa170 0x1008000 + 991600 11 FreeHand X 0x010f9830 0x1008000 + 989232 12 FreeHand X 0x01098678 0x1008000 + 591480 13 FreeHand X 0x010f7a5c 0x1008000 + 981596 Thread 1: 0 libSystem.B.dylib 0x90005dec syscall + 12 1 com.apple.OpenTransport 0x9ad015a0 BSD_waitevent + 44 2 com.apple.OpenTransport 0x9ad06360 CarbonSelectThreadFunc + 176 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 2: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad01e94 CarbonOperationThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 3: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad11df0 CarbonInetOperThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 4: 0 libSystem.B.dylib 0x90053f88 semaphore_timedwait_signal_trap + 8 1 libSystem.B.dylib 0x900707e8 pthread_cond_timedwait_relative_np + 556 2 ...ple.CoreServices.CarbonCore 0x90bf9330 TSWaitOnSemaphoreCommon + 176 3 ...ple.CoreServices.CarbonCore 0x90c012d0 TimerThread + 60 4 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 5: 0 libSystem.B.dylib 0x9001f48c select + 12 1 com.apple.CoreFoundation 0x907f1240 __CFSocketManager + 472 2 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 6: 0 libSystem.B.dylib 0x9002188c access + 12 1 ...e.print.framework.PrintCore 0x9169a620 CreateProxyURL(__CFURL const*) + 192 2 ...e.print.framework.PrintCore 0x9169a4f8 CreateOriginalPrinterProxyURL() + 80 3 ...e.print.framework.PrintCore 0x9169a034 CheckPrinterProxyVersion(OpaquePMPrinter*, __CFURL const*) + 192 4 ...e.print.framework.PrintCore 0x91699d94 PJCPrinterProxyCreateURL + 932 5 ...e.print.framework.PrintCore 0x916997bc PJCLaunchPrinterProxy(OpaquePMPrinter*, PMLaunchPCReason) + 32 6 ...e.print.framework.PrintCore 0x91699730 PJCLaunchPrinterProxyThread(void*) + 136 7 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 0 crashed with PPC Thread State 64: srr0: 0x00000000ffff8a60 srr1: 0x000000000200f030 vrsave: 0x00000000ff000000 cr: 0x24002244 xer: 0x0000000020000002 lr: 0x00000000011d2994 ctr: 0x00000000000003f6 r0: 0x0000000000000000 r1: 0x00000000bfffea60 r2: 0x0000000000000000 r3: 0x00000000083bb000 r4: 0x00000000083c0040 r5: 0x0000000000014d84 r6: 0x0000000000000010 r7: 0x0000000000000020 r8: 0x0000000000000030 r9: 0x0000000000000000 r10: 0x0000000000000060 r11: 0x0000000000000080 r12: 0x0000000007d7e000 r13: 0x0000000000000000 r14: 0x00000000005cbd26 r15: 0x0000000000000001 r16: 0x00000000017b03a0 r17: 0x0000000000000000 r18: 0x000000000068fa80 r19: 0x0000000000000001 r20: 0x0000000006c639c4 r21: 0x00000000006900f8 r22: 0x0000000006e09480 r23: 0x0000000006e0a250 r24: 0x0000000000000002 r25: 0x0000000000000000 r26: 0x00000000bfffed2c r27: 0x0000000006e05ce0 r28: 0x0000000000014d84 r29: 0x0000000000000000 r30: 0x0000000000014d84 r31: 0x00000000083bb000 Binary Images Description: 0x1000 - 0x2fff LaunchCFMApp /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp 0x27f000 - 0x2ce3c7 CarbonLibpwpc PEF binary: CarbonLibpwpc 0x2ce3d0 - 0x2e66bd Apple;Carbon;Multimedia PEF binary: Apple;Carbon;Multimedia 0x2e7c00 - 0x2e998b Apple;Carbon;Networking PEF binary: Apple;Carbon;Networking 0x31ab10 - 0x31abb3 CFMPriv_QuickTime PEF binary: CFMPriv_QuickTime 0x31ac20 - 0x31ac97 CFMPriv_System PEF binary: CFMPriv_System 0x31af30 - 0x31b000 CFMPriv_CarbonSound PEF binary: CFMPriv_CarbonSound 0x31b080 - 0x31b153 CFMPriv_CommonPanels PEF binary: CFMPriv_CommonPanels 0x31b230 - 0x31b2eb CFMPriv_Help PEF binary: CFMPriv_Help 0x31b2f0 - 0x31b3ba CFMPriv_HIToolbox PEF binary: CFMPriv_HIToolbox 0x31b440 - 0x31b516 CFMPriv_HTMLRendering PEF binary: CFMPriv_HTMLRendering 0x31b550 - 0x31b602 CFMPriv_CoreFoundation PEF binary: CFMPriv_CoreFoundation 0x31b7f0 - 0x31b8a5 CFMPriv_DVComponentGlue PEF binary: CFMPriv_DVComponentGlue 0x31f760 - 0x31f833 CFMPriv_ImageCapture PEF binary: CFMPriv_ImageCapture 0x31f8c0 - 0x31f9a5 CFMPriv_NavigationServices PEF binary: CFMPriv_NavigationServices 0x31fa20 - 0x31faf6 CFMPriv_OpenScripting?MacBLib PEF binary: CFMPriv_OpenScripting?MacBLib 0x31fbd0 - 0x31fc8e CFMPriv_Print PEF binary: CFMPriv_Print 0x31fcb0 - 0x31fd7d CFMPriv_SecurityHI PEF binary: CFMPriv_SecurityHI 0x31fe00 - 0x31fee2 CFMPriv_SpeechRecognition PEF binary: CFMPriv_SpeechRecognition 0x31ff60 - 0x320033 CFMPriv_CarbonCore PEF binary: CFMPriv_CarbonCore 0x3200b0 - 0x320183 CFMPriv_OSServices PEF binary: CFMPriv_OSServices 0x320260 - 0x320322 CFMPriv_AE PEF binary: CFMPriv_AE 0x320330 - 0x3203f5 CFMPriv_ATS PEF binary: CFMPriv_ATS 0x320470 - 0x320547 CFMPriv_ColorSync PEF binary: CFMPriv_ColorSync 0x3205d0 - 0x3206b3 CFMPriv_FindByContent PEF binary: CFMPriv_FindByContent 0x320730 - 0x32080a CFMPriv_HIServices PEF binary: CFMPriv_HIServices 0x320880 - 0x320960 CFMPriv_LangAnalysis PEF binary: CFMPriv_LangAnalysis 0x3209f0 - 0x320ad6 CFMPriv_LaunchServices PEF binary: CFMPriv_LaunchServices 0x320bb0 - 0x320c87 CFMPriv_PrintCore PEF binary: CFMPriv_PrintCore 0x320c90 - 0x320d52 CFMPriv_QD PEF binary: CFMPriv_QD 0x320e50 - 0x320f39 CFMPriv_SpeechSynthesis PEF binary: CFMPriv_SpeechSynthesis 0x405000 - 0x497f7a PowerPlant Shared Library PEF binary: PowerPlant Shared Library 0x498000 - 0x4f0012 Player PEF binary: Player 0x4f1000 - 0x54a4c0 KodakCMSC PEF binary: KodakCMSC 0x6bd000 - 0x6eca10 <Unknown disk fragment> PEF binary: <Unknown disk fragment> 0x7fc000 - 0x7fdb8b xRes Palette Importc PEF binary: xRes Palette Importc 0x1008000 - 0x17770a5 FreeHand X PEF binary: FreeHand X 0x17770b0 - 0x17a6fe7 MW_MSL.Carbon.Shlb PEF binary: MW_MSL.Carbon.Shlb 0x17fb000 - 0x17fff03 Smudge PEF binary: Smudge 0x5ce6000 - 0x5cecebe PICT Import Export68 PEF binary: PICT Import Export68 0x5ced000 - 0x5d24267 PNG Import Exportr68 PEF binary: PNG Import Exportr68 0x5d25000 - 0x5d30dde Release To Layerswpc PEF binary: Release To Layerswpc 0x5d31000 - 0x5d37fd2 Roughen PEF binary: Roughen 0x5d38000 - 0x5d459ae Shadow PEF binary: Shadow 0x5d46000 - 0x5d4b0de Spiral PEF binary: Spiral 0x5d4c000 - 0x5d57f07 Targa Import Export8 PEF binary: Targa Import Export8 0x5d58000 - 0x5d8d959 TIFF Import Export68 PEF binary: TIFF Import Export68 0x5d93000 - 0x5da0f65 Color Utilities PEF binary: Color Utilities 0x5f62000 - 0x5f6e795 Mirror PEF binary: Mirror 0x5f6f000 - 0x5fbd656 HTML Export PEF binary: HTML Export 0x5fc8000 - 0x5fd442f Graphic Hose PEF binary: Graphic Hose 0x5fd5000 - 0x5fe4b5a BMP Import Exportr68 PEF binary: BMP Import Exportr68 0x5fe5000 - 0x60342d6 PDF Export PEF binary: PDF Export 0x6041000 - 0x6042f44 Fractalizej@ PEF binary: Fractalizej@ 0x6043000 - 0x6075214 Chart Tool™ PEF binary: Chart Tool™ 0x6076000 - 0x607d46d Bend PEF binary: Bend 0x607e000 - 0x60cda7b PDF Import PEF binary: PDF Import 0x60dc000 - 0x60e38f2 Photoshop ImportChartCursor PEF binary: Photoshop ImportChartCursor 0x60e4000 - 0x60eb9b1 3D Rotationp PEF binary: 3D Rotationp 0x60ec000 - 0x611b458 JPEG Import ExportANEL PEF binary: JPEG Import ExportANEL 0x611c000 - 0x613d89f GIF Import Export PEF binary: GIF Import Export 0x613e000 - 0x616d7f7 Flash Export PEF binary: Flash Export 0x616e000 - 0x6175d75 Fisheye Lens PEF binary: Fisheye Lens 0x6176000 - 0x6182343 IPTC File Info PEF binary: IPTC File Info 0x6184000 - 0x6193790 PEF binary: 0x6194000 - 0x61965e5 Photoshop Palette Import PEF binary: Photoshop Palette Import 0x6197000 - 0x619c5a4 Add PointsZ PEF binary: Add PointsZ 0x619d000 - 0x61ad92b Emboss PEF binary: Emboss 0x61ae000 - 0x61be6e1 AppleScript™ Xtrawpc PEF binary: AppleScript™ Xtrawpc 0x61bf000 - 0x61d16de Navigation PEF binary: Navigation 0x61d2000 - 0x61ff94e CorelDRAW 7-8 Import PEF binary: CorelDRAW 7-8 Import 0x620a000 - 0x620d7f1 Trap PEF binary: Trap 0x620e000 - 0x62149d4 Import RGB Color Table PEF binary: Import RGB Color Table 0x6215000 - 0x6217dfe Arc PEF binary: Arc 0x6218000 - 0x62211e3 Delete Empty Text Blocks PEF binary: Delete Empty Text Blocks 0x6222000 - 0x624c8da MIX Services PEF binary: MIX Services 0x7d0b000 - 0x7d37fff com.apple.print.framework.Print.Private 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/Current/Plugins/PrintCocoaUI.bundle/Contents/MacOS/PrintCocoaUI 0x7dbf000 - 0x7ddffff com.apple.print.PrintingCocoaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Plugins/PrintingCocoaPDEs.bundle/Contents/MacOS/PrintingCocoaPDEs 0x7f05000 - 0x7f39fff com.epson.ijprinter.pde.PrintSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/PrintSetting.plugin/Contents/MacOS/PrintSetting 0x7f49000 - 0x8044fff com.epson.ijprinter.IJPFoundation 6.54 /Library/Printers/EPSON/InkjetPrinter/Libraries/IJPFoundation.framework/Versions/A/IJPFoundation 0x809a000 - 0x80cdfff com.epson.ijprinter.pde.ColorManagement.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ColorManagement.plugin/Contents/MacOS/ColorManagement 0x80dd000 - 0x8110fff com.epson.ijprinter.pde.ExpandMargin.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExpandMargin.plugin/Contents/MacOS/ExpandMargin 0x8120000 - 0x8153fff com.epson.ijprinter.pde.ExtensionSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExtensionSetting.plugin/Contents/MacOS/ExtensionSetting 0x8163000 - 0x8196fff com.epson.ijprinter.pde.DoubleSidePrint.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/DoubleSidePrint.plugin/Contents/MacOS/DoubleSidePrint 0x81a6000 - 0x81bffff com.apple.print.PrintingTiogaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Frameworks/Print.framework/Versions/A/Plugins/PrintingTiogaPDEs.bundle/Contents/MacOS/PrintingTiogaPDEs 0x838f000 - 0x8397fff com.apple.print.converter.plugin 4.5 (163.8) /System/Library/Printers/CVs/Converter.plugin/Contents/MacOS/Converter 0x78e00000 - 0x78e07fff libLW8Utils.dylib /System/Library/Printers/Libraries/libLW8Utils.dylib 0x79200000 - 0x7923ffff libLW8Converter.dylib /System/Library/Printers/Libraries/libLW8Converter.dylib 0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld 0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib 0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib 0x9021b000 - 0x90268fff com.apple.CoreText 1.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreText.framework/Versions/A/CoreText 0x90293000 - 0x90344fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS 0x90373000 - 0x9072efff com.apple.CoreGraphics 1.258.85 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics 0x907bb000 - 0x90895fff com.apple.CoreFoundation 6.4.11 (368.35) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x908de000 - 0x908defff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices 0x908e0000 - 0x909e2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib 0x90a3c000 - 0x90ac0fff libobjc.A.dylib /usr/lib/libobjc.A.dylib 0x90aea000 - 0x90b5cfff IOKit /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit 0x90b72000 - 0x90b84fff libauto.dylib /usr/lib/libauto.dylib 0x90b8b000 - 0x90e62fff com.apple.CoreServices.CarbonCore 681.19 (681.21) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore 0x90ec8000 - 0x90f48fff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices 0x90f92000 - 0x90fd4fff com.apple.CFNetwork 129.24 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork 0x90fe9000 - 0x91001fff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServicesCore.framework/Versions/A/WebServicesCore 0x91011000 - 0x91092fff com.apple.SearchKit 1.0.8 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit 0x910d8000 - 0x91101fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata 0x91112000 - 0x91120fff libz.1.dylib /usr/lib/libz.1.dylib 0x91123000 - 0x912defff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security 0x913dd000 - 0x913e6fff com.apple.DiskArbitration 2.1.2 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration 0x913ed000 - 0x913f5fff libbsm.dylib /usr/lib/libbsm.dylib 0x913f9000 - 0x91421fff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration 0x91434000 - 0x9143ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib 0x91444000 - 0x914bffff com.apple.audio.CoreAudio 3.0.5 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio 0x914fc000 - 0x914fcfff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices 0x914fe000 - 0x91536fff com.apple.AE 312.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE 0x91551000 - 0x91623fff com.apple.ColorSync 4.4.13 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSync.framework/Versions/A/ColorSync 0x91676000 - 0x91707fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore 0x9174e000 - 0x91805fff com.apple.QD 3.10.28 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD 0x91842000 - 0x918a0fff com.apple.HIServices 1.5.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices 0x918cf000 - 0x918f0fff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis 0x91904000 - 0x91929fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/FindByContent.framework/Versions/A/FindByContent 0x9193c000 - 0x9197efff com.apple.LaunchServices 183.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices 0x9199a000 - 0x919aefff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis 0x919bc000 - 0x91a02fff com.apple.ImageIO.framework 1.5.9 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/ImageIO 0x91a19000 - 0x91ae0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib 0x91b2e000 - 0x91b43fff libcups.2.dylib /usr/lib/libcups.2.dylib 0x91b48000 - 0x91b66fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib 0x91b6c000 - 0x91c23fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib 0x91c72000 - 0x91c76fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib 0x91c78000 - 0x91ce2fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRaw.dylib 0x91ce7000 - 0x91d02fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib 0x91d07000 - 0x91d0afff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib 0x91d0c000 - 0x91deafff libxml2.2.dylib /usr/lib/libxml2.2.dylib 0x91e0a000 - 0x91e48fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib 0x91e4f000 - 0x91e4ffff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate 0x91e51000 - 0x91f36fff com.apple.vImage 2.4 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage 0x91f3e000 - 0x91f5dfff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib 0x91fc9000 - 0x92037fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib 0x92042000 - 0x920d7fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib 0x920f1000 - 0x92679fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib 0x926ac000 - 0x929d7fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib 0x92a07000 - 0x92af5fff libiconv.2.dylib /usr/lib/libiconv.2.dylib 0x92af8000 - 0x92b80fff com.apple.DesktopServices 1.3.7 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv 0x92bc1000 - 0x92df4fff com.apple.Foundation 6.4.12 (567.42) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x92f27000 - 0x92f45fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib 0x92f50000 - 0x92faafff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib 0x92fc8000 - 0x92fc8fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon 0x92fca000 - 0x92fdefff com.apple.ImageCapture 3.0 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture 0x92ff6000 - 0x93006fff com.apple.speech.recognition.framework 3.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition 0x93012000 - 0x93027fff com.apple.securityhi 2.0 (203) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI 0x93039000 - 0x930c0fff com.apple.ink.framework 101.2 (69) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink 0x930d4000 - 0x930dffff com.apple.help 1.0.3 (32) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help 0x930e9000 - 0x93117fff com.apple.openscripting 1.2.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting 0x93131000 - 0x93140fff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print 0x9314c000 - 0x931b2fff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering 0x931e3000 - 0x93232fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices.framework/Versions/A/NavigationServices 0x93260000 - 0x9327dfff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/Versions/A/CarbonSound 0x9328f000 - 0x9329cfff com.apple.CommonPanels 1.2.2 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels 0x932a5000 - 0x935b3fff com.apple.HIToolbox 1.4.10 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox 0x93703000 - 0x9370ffff com.apple.opengl 1.4.7 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL 0x93714000 - 0x93734fff com.apple.DirectoryService.Framework 3.3 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryService 0x93787000 - 0x93787fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa 0x93789000 - 0x93dbcfff com.apple.AppKit 6.4.10 (824.48) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit 0x94149000 - 0x941bbfff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData 0x941f4000 - 0x942b9fff com.apple.audio.toolbox.AudioToolbox 1.4.7 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox 0x9430c000 - 0x9430cfff com.apple.audio.units.AudioUnit 1.4 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit 0x9430e000 - 0x944cefff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore 0x94518000 - 0x94555fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib 0x9455d000 - 0x945adfff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dylib 0x945b6000 - 0x945cffff com.apple.CoreVideo 1.4.2 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo 0x9477d000 - 0x9478cfff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib 0x94794000 - 0x947a1fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib 0x947a7000 - 0x947c6fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib 0x947e7000 - 0x94800fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib 0x94807000 - 0x94b3afff com.apple.QuickTime 7.6.4 (1327.73) /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime 0x94c22000 - 0x94c93fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib 0x94e09000 - 0x94f39fff com.apple.AddressBook.framework 4.0.6 (490) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook 0x94fcc000 - 0x94fdbfff com.apple.DSObjCWrappers.Framework 1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWrappers 0x94fe3000 - 0x95010fff com.apple.LDAPFramework 1.4.1 (69.0.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP 0x95017000 - 0x95027fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib 0x9502b000 - 0x9505afff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib 0x9506a000 - 0x95087fff libresolv.9.dylib /usr/lib/libresolv.9.dylib 0x9acff000 - 0x9ad1dfff com.apple.OpenTransport 2.0 /System/Library/PrivateFrameworks/OpenTransport.framework/OpenTransport 0x9ad98000 - 0x9ad99fff com.apple.iokit.dvcomponentglue 1.7.9 /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue 0x9b1db000 - 0x9b1f2fff libCFilter.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCFilter.A.dylib 0x9c69b000 - 0x9c6bdfff libmx.A.dylib /usr/lib/libmx.A.dylib 0xeab00000 - 0xeab25fff libConverter.dylib /System/Library/Printers/Libraries/libConverter.dylib Model: PowerMac3,1, BootROM 4.2.8f1, 1 processors, PowerPC G4 (3.3), 1.3 GHz, 2 GB Graphics: ATI Radeon 7500, ATY,RV200, AGP, 32 MB Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333 Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333 Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333 Memory Module: DIMM3/J24, 512 MB, SDRAM, PC133-333 Modem: Spring, UCJ, V.90, 3.0F, APPLE VERSION 0001, 4/7/1999 Network Service: Built-in Ethernet, Ethernet, en0 PCI Card: SeriTek/1V2E2 v.5.1.3,11/22/05, 23:47:18, ata, SLOT-B PCI Card: pci-bridge, pci, SLOT-C PCI Card: firewire, ieee1394, 2x8 PCI Card: usb, usb, 2x9 PCI Card: usb, usb, 2x9 PCI Card: pcie55,2928, 2x9 PCI Card: ATTO,ExpressPCIPro, scsi, SLOT-D Parallel ATA Device: MATSHITADVD-ROM SR-8585 Parallel ATA Device: IOMEGA ZIP 100 ATAPI USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMic USB audio system, Griffin Technology, Inc, Up to 12 Mb/sec, 500 mA USB Device: USB Storage Device, Generic, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 MFP, EPSON, Up to 12 Mb/sec, 500 mA USB Device: DYMO LabelWriter Twin Turbo, DYMO, Up to 12 Mb/sec, 500 mA USB Device: USB 2.0 CD + HDD, DMI, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMate, USB To ADB Adaptor, Griffin Technology, Inc., Up to 1.5 Mb/sec, 500 mA USB Device: Hub in Apple Pro Keyboard, Alps Electric, Up to 12 Mb/sec, 500 mA USB Device: Griffin PowerMate, Griffin Technology, Inc., Up to 1.5 Mb/sec, 100 mA

  Read the article

• Cannot install mysql-server (5.5.22) on clean ubuntu 12.04 LTS server

  - by Christian

  I have a clean minimal install of Ubuntu 12.04 LTS server 64-bit (just a root user and nothing alse installed). I tried to install the mysql-server with the following command: apt-get install mysql-server The installation aborts with the following error: The following NEW packages will be installed: libdbd-mysql-perl{a} libmysqlclient18{a} mysql-client mysql-client-5.5{a} mysql-client-core-5.5{a} mysql-common{a} mysql-server mysql-server-5.5{a} mysql-server-core-5.5{a} 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 11.7 kB/26.2 MB of archives. After unpacking 94.5 MB will be used. Do you want to continue? [Y/n/?] y Get: 1 http://mirror.eu.oneandone.net/ubuntu/ubuntu/ precise/main mysql-client all 5.5.22-0ubuntu1 [11.7 kB] Fetched 11.7 kB in 0s (567 kB/s) Preconfiguring packages ... Selecting previously unselected package mysql-common. (Reading database ... 54008 files and directories currently installed.) Unpacking mysql-common (from .../mysql-common_5.5.22-0ubuntu1_all.deb) ... Selecting previously unselected package libmysqlclient18. Unpacking libmysqlclient18 (from .../libmysqlclient18_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package libdbd-mysql-perl. Unpacking libdbd-mysql-perl (from .../libdbd-mysql-perl_4.020-1build2_amd64.deb) ... Selecting previously unselected package mysql-client-core-5.5. Unpacking mysql-client-core-5.5 (from .../mysql-client-core-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-client-5.5. Unpacking mysql-client-5.5 (from .../mysql-client-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-server-core-5.5. Unpacking mysql-server-core-5.5 (from .../mysql-server-core-5.5_5.5.22-0ubuntu1_amd64.deb) ... Processing triggers for man-db ... Setting up mysql-common (5.5.22-0ubuntu1) ... Selecting previously unselected package mysql-server-5.5. (Reading database ... 54189 files and directories currently installed.) Unpacking mysql-server-5.5 (from .../mysql-server-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-client. Unpacking mysql-client (from .../mysql-client_5.5.22-0ubuntu1_all.deb) ... Selecting previously unselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.5.22-0ubuntu1_all.deb) ... Processing triggers for ureadahead ... Processing triggers for man-db ... Setting up libmysqlclient18 (5.5.22-0ubuntu1) ... Setting up libdbd-mysql-perl (4.020-1build2) ... Setting up mysql-client-core-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-client-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-server-core-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... 120502 10:17:41 [Note] Plugin 'FEDERATED' is disabled. 120502 10:17:41 InnoDB: The InnoDB memory heap is disabled 120502 10:17:41 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120502 10:17:41 InnoDB: Compressed tables use zlib 1.2.3.4 120502 10:17:41 InnoDB: Initializing buffer pool, size = 128.0M 120502 10:17:41 InnoDB: Completed initialization of buffer pool 120502 10:17:41 InnoDB: highest supported file format is Barracuda. 120502 10:17:41 InnoDB: Waiting for the background threads to start 120502 10:17:42 InnoDB: 1.1.8 started; log sequence number 1595675 120502 10:17:42 InnoDB: Starting shutdown... 120502 10:17:42 InnoDB: Shutdown completed; log sequence number 1595675 start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Setting up mysql-client (5.5.22-0ubuntu1) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.5 mysql-server I am completely lost because I have tried everything on the web to solve my problem (clearning the install, reconfiguring with dpkg, manually editing the my.cnf). I also set up a new clean install but nothing helped. What am I doing wrong? New information: The file /var/log/upstart/mysql.log contains the following error after the installation: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld in /etc/apparmor.d/tunables/global at line 17: Could not open 'tunables/proc'

  Read the article

• How to configure a zone cluster on Solaris Cluster 4.0

  - by JuergenS

  This is a short overview on how to configure a zone cluster on Solaris Cluster 4.0. This is a little bit different as in Solaris Cluster 3.2/3.3 because Solaris Cluster 4.0 is only running on Solaris 11. The name of the zone cluster must be unique throughout the global Solaris Cluster and must be configured on a global Solaris Cluster. Please read all the requirements for zone cluster in Solaris Cluster Software Installation Guide for SC4.0. For Solaris Cluster 3.2/3.3 please refer to my previous blog Configuration steps to create a zone cluster in Solaris Cluster 3.2/3.3. A. Configure the zone cluster into the already running global clusterCheck if zone cluster can be created # cluster show-netprops to change number of zone clusters use # cluster set-netprops -p num_zoneclusters=12 Note: 12 zone clusters is the default, values can be customized! Create config file (zc1config) for zone cluster setup e.g: Configure zone cluster # clzc configure -f zc1config zc1 Note: If not using the config file the configuration can also be done manually # clzc configure zc1 Check zone configuration # clzc export zc1 Verify zone cluster # clzc verify zc1 Note: The following message is a notice and comes up on several clzc commands Waiting for zone verify commands to complete on all the nodes of the zone cluster "zc1"... Install the zone cluster # clzc install zc1 Note: Monitor the consoles of the global zone to see how the install proceed! (The output is different on the nodes) It's very important that all global cluster nodes have installed the same set of ha-cluster packages! Boot the zone cluster # clzc boot zc1 Login into non-global-zones of zone cluster zc1 on all nodes and finish Solaris installation. # zlogin -C zc1 Check status of zone cluster # clzc status zc1 Login into non-global-zones of zone cluster zc1 and configure the shell environment for root (for PATH: /usr/cluster/bin, for MANPATH: /usr/cluster/man) # zlogin -C zc1 If using additional name service configure /etc/nsswitch.conf of zone cluster non-global zones. hosts: cluster files netmasks: cluster files Configure /etc/inet/hosts of the zone cluster zones Enter all the logical hosts of non-global zones B. Add resource groups and resources to zone cluster Create a resource group in zone cluster # clrg create -n <zone-hostname-node1>,<zone-hostname-node2> app-rg Note1: Use command # cluster status for zone cluster resource group overview. Note2: You can also run all commands for zone cluster in global cluster by adding the option -Z to the command. e.g: # clrg create -Z zc1 -n <zone-hostname-node1>,<zone-hostname-node2> app-rg Set up the logical host resource for zone cluster In the global zone do: # clzc configure zc1 clzc:zc1 add net clzc:zc1:net set address=<zone-logicalhost-ip> clzc:zc1:net end clzc:zc1 commit clzc:zc1 exit Note: Check that logical host is in /etc/hosts file In zone cluster do: # clrslh create -g app-rg -h <zone-logicalhost> <zone-logicalhost>-rs Set up storage resource for zone cluster Register HAStoragePlus # clrt register SUNW.HAStoragePlus Example1) ZFS storage pool In the global zone do: Configure zpool eg: # zpool create <zdata> mirror cXtXdX cXtXdX and # clzc configure zc1 clzc:zc1 add dataset clzc:zc1:dataset set name=zdata clzc:zc1:dataset end clzc:zc1 verify clzc:zc1 commit clzc:zc1 exit Check setup with # clzc show -v zc1 In the zone cluster do: # clrs create -g app-rg -t SUNW.HAStoragePlus -p zpools=zdata app-hasp-rs Example2) HA filesystem In the global zone do: Configure SVM diskset and SVM devices. and # clzc configure zc1 clzc:zc1 add fs clzc:zc1:fs set dir=/data clzc:zc1:fs set special=/dev/md/datads/dsk/d0 clzc:zc1:fs set raw=/dev/md/datads/rdsk/d0 clzc:zc1:fs set type=ufs clzc:zc1:fs add options [logging] clzc:zc1:fs end clzc:zc1 verify clzc:zc1 commit clzc:zc1 exit Check setup with # clzc show -v zc1 In the zone cluster do: # clrs create -g app-rg -t SUNW.HAStoragePlus -p FilesystemMountPoints=/data app-hasp-rs Example3) Global filesystem as loopback file system In the global zone configure global filesystem and it to /etc/vfstab on all global nodes e.g.: /dev/md/datads/dsk/d0 /dev/md/datads/dsk/d0 /global/fs ufs 2 yes global,logging and # clzc configure zc1 clzc:zc1 add fs clzc:zc1:fs set dir=/zone/fs (zc-lofs-mountpoint) clzc:zc1:fs set special=/global/fs (globalcluster-mountpoint) clzc:zc1:fs set type=lofs clzc:zc1:fs end clzc:zc1 verify clzc:zc1 commit clzc:zc1 exit Check setup with # clzc show -v zc1 In the zone cluster do: (Create scalable rg if not already done) # clrg create -p desired_primaries=2 -p maximum_primaries=2 app-scal-rg # clrs create -g app-scal-rg -t SUNW.HAStoragePlus -p FilesystemMountPoints=/zone/fs hasp-rs More details of adding storage available in the Installation Guide for zone cluster Switch resource group and resources online in the zone cluster # clrg online -eM app-rg # clrg online -eM app-scal-rg Test: Switch of the resource group in the zone cluster # clrg switch -n zonehost2 app-rg # clrg switch -n zonehost2 app-scal-rg Add supported dataservice to zone cluster Documentation for SC4.0 is available here Example output: Appendix: To delete a zone cluster do: # clrg delete -Z zc1 -F + Note: Zone cluster uninstall can only be done if all resource groups are removed in the zone cluster. The command 'clrg delete -F +' can be used in zone cluster to delete the resource groups recursively. # clzc halt zc1 # clzc uninstall zc1 Note: If clzc command is not successful to uninstall the zone, then run 'zoneadm -z zc1 uninstall -F' on the nodes where zc1 is configured # clzc delete zc1

  Read the article

• Unit testing is… well, flawed.

  - by Dewald Galjaard

  Hey someone had to say it. I clearly recall my first IT job. I was appointed Systems Co-coordinator for a leading South African retailer at store level. Don’t get me wrong, there is absolutely nothing wrong with an honest day’s labor and in fact I highly recommend it, however I’m obliged to refer to the designation cautiously; in reality all I had to do was monitor in-store prices and two UNIX front line controllers. If anything went wrong – I only had to phone it in… Luckily that wasn’t all I did. My duties extended to some other interesting annual occurrence – stock take. Despite a bit more curious affair, it was still a tedious process that took weeks of preparation and several nights to complete.  Then also I remember that no matter how elaborate our planning was, the entire exercise would be rendered useless if we couldn’t get the basics right – that being the act of counting. Sounds simple right? We’ll with a store which could potentially carry over tens of thousands of different items… we’ll let’s just say I believe that’s when I first became a coffee addict. In those days the act of counting stock was a very humble process. Nothing like we have today. A staff member would be assigned a bin or shelve filled with items he or she had to sort then count. Thereafter they had to record their findings on a complementary piece of paper. Every night I would manage several teams. Each team was divided into two groups - counters and auditors. Both groups had the same task, only auditors followed shortly on the heels of the counters, recounting stock levels, making sure the original count correspond to their findings. It was a simple yet hugely responsible orchestration of people and thankfully there was one fundamental and golden rule I could always abide by to ensure things run smoothly – No-one was allowed to audit their own work. Nope, not even on nights when I didn’t have enough staff available. This meant I too at times had to get up there and get counting, or have the audit stand over until the next evening. The reason for this was obvious - late at night and with so much to do we were prone to make some mistakes, then on the recount, without a fresh set of eyes, you were likely to repeat the offence. Now years later this rule or guideline still holds true as we develop software (as far removed as software development from counting stock may be). For some reason it is a fundamental guideline we’re simply ignorant of. We write our code, we write our tests and thus commit the same horrendous offence. Yes, the procedure of writing unit tests as practiced in most development houses today – is flawed. Most if not all of the tests we write today exercise application logic – our logic. They are based on the way we believe an application or method should/may/will behave or function. As we write our tests, our unit tests mirror our best understanding of the inner workings of our application code. Unfortunately these tests will therefore also include (or be unaware of) any imperfections and errors on our part. If your logic is flawed as you write your initial code, chances are, without a fresh set of eyes, you will commit the same error second time around too. Not even experience seems to be a suitable solution. It certainly helps to have deeper insight, but is that really the answer we should be looking for? Is that really failsafe? What about code review? Code review is certainly an answer. You could have one developer coding away and another (or team) making sure the logic is sound. The practice however has its obvious drawbacks. Firstly and mainly it is resource intensive and from what I’ve seen in most development houses, given heavy deadlines, this guideline is seldom adhered to. Hardly ever do we have the resources, money or time readily available. So what other options are out there? A quest to find some solution revealed a project by Microsoft Research called PEX. PEX is a framework which creates several test scenarios for each method or class you write, automatically. Think of it as your own personal auditor. Within a few clicks the framework will auto generate several unit tests for a given class or method and save them to a single project. PEX help to audit your work. It lends a fresh set of eyes to any project you’re working on and best of all; it is cost effective and fast. Check them out at http://research.microsoft.com/en-us/projects/pex/ In upcoming posts we’ll dive deeper into how it works and how it can help you.   Certainly there are more similar frameworks out there and I would love to hear from you. Please share your experiences and insights.

  Read the article

• Beginner Geek: How to Use Multiple Monitors to Be More Productive

  - by Chris Hoffman

  Many people swear by multiple monitors, whether they’re geeks or just people who need to be productive. Why use just one monitor when you can use two or more and see more at once? Additional monitors allow you to expand your desktop, getting more screen real estate for your open programs. Windows makes it very easy to set up additional monitors, and your computer probably has the necessary ports. Why Use Multiple Monitors? Multiple monitors give you more screen real estate. Hook up multiple monitors to a computer and you can move your mouse back and forth between them, dragging programs between monitors as if you had an extra-large desktop. People who swear by multiple monitors use them to display multiple things on-screen at a time. Rather than Alt+Tabbing and task switching to glance at another window, you can just look over with your eyes and then look back to the program you’re using. Some examples of use cases for multiple monitors include: Coders who want to view their code on one display with the other display reserved for documentation. They can just glance over at the documentation and look back at their primary workspace. Anyone who needs to view something while working. Viewing a web page while writing an email, viewing another document while writing an something, or working with two large spreadsheets and having both visible at once. People who need to keep an eye on information, whether it’s email or up-to-date statistics, while working. Gamers who want to see more of the game world, extending the game across multiple displays. Geeks who just want to watch a video on one screen while doing something else on the other screen. Hooking Up Multiple Monitors Hooking up an additional monitor to your computer should be very simple. Most new computers come with more than one port for a monitor — whether DVI, HDMI, the older VGA port, or a mix. Some computers may include splitter cables that allow you to connect multiple monitors to a single port. Most laptops also come with ports that allow you to hook up an external monitor. Plug a monitor into your laptop’s DVI or VGA port and Windows will allow you to use both your laptop’s integrated display and the external monitor at once. This all depends on the ports your computer has and how your monitor connects. If you have an old VGA monitor lying around and you have a modern laptop with only DVI or HDMI connectors, you may need an adapter that allows you to plug your monitor’s VGA cable into the new port. Be sure to take your computer’s ports into account before you get another monitor for it. Managing Multiple Monitors With Windows Windows makes using multiple monitors easy. Just plug the monitor into the appropriate port on your computer and Windows should automatically extend your desktop onto it. You can now just drag and drop windows between monitors. To control how this works, right-click your Windows desktop and select Screen resolution. Choose an option from the Multiple displays box. The Extend option extends your desktop onto an additional monitor, while the other options are mainly useful if you’re using an additional monitor for presentations — for example, you could mirror your laptop’s desktop onto a large monitor or blank your laptop’s screen while it’s connected to a larger display. Be sure to arrange your monitors properly so Windows understands how your monitors are physically positioned. Windows 8 allows you to extend your Windows taskbar across multiple monitors. You’ll find this option in the taskbar’s options window — right-click the taskbar and select Properties. You can also choose where you want Windows to display taskbar buttons for open programs — on any monitor’s taskbar or only on the taskbar on the associated monitor. Windows 7 doesn’t have these convenient features built-in — your second monitor won’t have a taskbar. To extend your taskbar onto an additional monitor, you’ll need a third-party utility like the free and open-source Dual Monitor Taskbar. If you just have a single monitor, you can also use the Aero Snap feature to quickly place multiple Windows applications side by side. On Windows 7 or 8, press Windows Key + Left or Windows Key + Right to make the current window take up the left or right half of your display. You could also drag any window’s title bar to the left or right edges of your screen and release the window. How useful this feature is depends on your monitor’s size and resolution. If you have a large, high-resolution monitor, it will allow you to see a lot. If you have a smaller laptop monitor with the seemingly standard 1366×768 resolution, you won’t be able to see much of each snapped window at once, so snapping windows may not be practical. Image Credit: Chance Reecher on Flickr, Camp Atterbury Joint Maneuver Training Center on Flickr, Xavier Caballe on Flickr     

  Read the article

• Redirect Google crawler to different robots.txt via .htaccess

  - by user3474818

  I have googled for the answer all day and still couldn't find an answer. I have a virtual subdomain www.static.example.com which is a mirror site of www.example.com. It means I have just one root folder for subdomain and domain aswell. I want to redirect crawlers to different robots.txt file - robots_static.txt when they see .static in url in which I will forbid indexing via /disallow command. I want to do this because I have duplicated content in Google search results. Subdomain is showing the exact same content as the main domain. Does anyone know how could I achieve that crawlers sees robots_static.txt instead of robots.txt? What I have managed to find so far is this: RewriteCond %{HTTP_HOST} ^www.static.*$ [NC] RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*robots\.txt.*\ HTTP/ [NC] RewriteRule ^robots\.txt /robots_static.txt [NC,L] but when I check in webmaster tools, it still sees robots.txt as my robots file instead of robots_static.txt, so it crawls and index everything twice. What did I do wrong? Thanks EDIT: This is my .htaccess file ## # @package Joomla # @copyright Copyright (C) 2005 - 2013 Open Source Matters. All rights reserved. # @license GNU General Public License version 2 or later; see LICENSE.txt ## ## # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE! # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. ## ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks ## Mod_rewrite in use. RewriteEngine On RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^www.static.*$ [NC] RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*robots\.txt.*\ HTTP/ [NC] RewriteRule ^robots\.txt /robots_static.txt [NC,L] ## Begin - Rewrite rules to block out some common exploits. # If you experience problems on your site block out the operations listed below # This attempts to block the most common type of exploit `attempts` to Joomla! # # Block out any script trying to base64_encode data within the URL. RewriteCond %{QUERY_STRING} base64_encode[^(]*\([^)]*\) [OR] # Block out any script that includes a <script> tag in URL. RewriteCond %{QUERY_STRING} (<|%3C)([^s]*s)+cript.*(>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL. RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL. RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Return 403 Forbidden header and show the content of the root homepage RewriteRule .* index.php [F] # ## End - Rewrite rules to block out some common exploits. ## Begin - Custom redirects # # If you need to redirect some pages, or set a canonical non-www to # www redirect (or vice versa), place that code here. Ensure those # redirects use the correct RewriteRule syntax and the [R=301,L] flags. # ## End - Custom redirects ## # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root). ## # RewriteBase / RewriteCond %{THE_REQUEST} ^GET.*index\.php [NC] RewriteCond %{THE_REQUEST} !/system/.* RewriteRule (.*?)index\.php/*(.*) /$1$2 [R=301,L] RewriteCond %{THE_REQUEST} ^GET ## Begin - Joomla! core SEF Section. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}] # # If the requested path and file is not /index.php and the request # has not already been internally rewritten to the index.php script RewriteCond %{REQUEST_URI} !^/index\.php # and the request is for something within the component folder, # or for the site root, or for an extensionless URL, or the # requested URL ends with one of the listed extensions RewriteCond %{REQUEST_URI} /component/|(/[^.]*|\.(php|html?|feed|pdf|vcf|raw))$ [NC] # and the requested path and file doesn't directly match a physical file RewriteCond %{REQUEST_FILENAME} !-f # and the requested path and file doesn't directly match a physical folder RewriteCond %{REQUEST_FILENAME} !-d # internally rewrite the request to the index.php script RewriteRule .* index.php [L] # ## End - Joomla! core SEF Section. <FilesMatch "\.(ico|pdf|flv|jpg|ttf|jpg|jpeg|png|gif|js|css|swf)$"> Header set Expires "Wed, 15 Apr 2020 20:00:00 GMT" Header set Cache-Control "public" </FilesMatch> <ifModule mod_headers.c> Header set Connection keep-alive </ifModule> ########## Begin - Remove Etags # FileETag none # ########## End - Remove Etags

  Read the article

• Deduping your redundancies

  - by nospam(at)example.com (Joerg Moellenkamp)

  Robin Harris of Storagemojo pointed to an interesting article about about deduplication and it's impact to the resiliency of your data against data corruption on ACM Queue. The problem in short: A considerable number of filesystems store important metadata at multiple locations. For example the ZFS rootblock is copied to three locations. Other filesystems have similar provisions to protect their metadata. However you can easily proof, that the rootblock pointer in the uberblock of ZFS for example is pointing to blocks with absolutely equal content in all three locatition (with zdb -uu and zdb -r). It has to be that way, because they are protected by the same checksum. A number of devices offer block level dedup, either as an option or as part of their inner workings. However when you store three identical blocks on them and the devices does block level dedup internally, the device may just deduplicated your redundant metadata to a block stored just once that is stored on the non-voilatile storage. When this block is corrupted, you have essentially three corrupted copies. Three hit with one bullet. This is indeed an interesting problem: A device doing deduplication doesn't know if a block is important or just a datablock. This is the reason why I like deduplication like it's done in ZFS. It's an integrated part and so important parts don't get deduplicated away. A disk accessed by a block level interface doesn't know anything about the importance of a block. A metadata block is nothing different to it's inner mechanism than a normal data block because there is no way to tell that this is important and that those redundancies aren't allowed to fall prey to some clever deduplication mechanism. Robin talks about this in regard of the Sandforce disk controllers who use a kind of dedup to reduce some of the nasty effects of writing data to flash, but the problem is much broader. However this is relevant whenever you are using a device with block level deduplication. It's just the point that you have to activate it for most implementation by command, whereas certain devices do this by default or by design and you don't know about it. However I'm not perfectly sure about that ? given that storage administration and server administration are often different groups with different business objectives I would ask your storage guys if they have activated dedup without telling somebody elase on their boxes in order to speak less often with the storage sales rep. The problem is even more interesting with ZFS. You may use ditto blocks to protect important data to store multiple copies of data in the pool to increase redundancy, even when your pool just consists out of one disk or just a striped set of disk. However when your device is doing dedup internally it may remove your redundancy before it hits the nonvolatile storage. You've won nothing. Just spend your disk quota on the the LUNs in the SAN and you make your disk admin happy because of the good dedup ratio However you can just fall in this specific "deduped ditto block"trap when your pool just consists out of a single device, because ZFS writes ditto blocks on different disks, when there is more than just one disk. Yet another reason why you should spend some extra-thought when putting your zpool on a single LUN, especially when the LUN is sliced and dices out of a large heap of storage devices by a storage controller. However I have one problem with the articles and their specific mention of ZFS: You can just hit by this problem when you are using the deduplicating device for the pool. However in the specifically mentioned case of SSD this isn't the usecase. Most implementations of SSD in conjunction with ZFS are hybrid storage pools and so rotating rust disk is used as pool and SSD are used as L2ARC/sZIL. And there it simply doesn't matter: When you really have to resort to the sZIL (your system went down, it doesn't matter of one block or several blocks are corrupt, you have to fail back to the last known good transaction group the device. On the other side, when a block in L2ARC is corrupt, you simply read it from the pool and in HSP implementations this is the already mentioned rust. In conjunction with ZFS this is more interesting when using a storage array, that is capable to do dedup and where you use LUNs for your pool. However as mentioned before, on those devices it's a user made decision to do so, and so it's less probable that you deduplicating your redundancies. Other filesystems lacking acapability similar to hybrid storage pools are more "haunted" by this problem of SSD using dedup-like mechanisms internally, because those filesystem really store the data on the the SSD instead of using it just as accelerating devices. However at the end Robin is correct: It's jet another point why protecting your data by creating redundancies by dispersing it several disks (by mirror or parity RAIDs) is really important. No dedup mechanism inside a device can dedup away your redundancy when you write it to a totally different and indepenent device.

  Read the article

• jquery data selector

  - by Tauren

  I need to select elements based on values stored in an element's .data() object. At a minimum, I'd like to select top-level data properties using selectors, perhaps like this: $('a').data("category","music"); $('a:data(category=music)'); Or perhaps the selector would be in regular attribute selector format: $('a[category=music]'); Or in attribute format, but with a specifier to indicate it is in .data(): $('a[:category=music]'); I've found James Padolsey's implementation to look simple, yet good. The selector formats above mirror methods shown on that page. There is also this Sizzle patch. For some reason, I recall reading a while back that jQuery 1.4 would include support for selectors on values in the jquery .data() object. However, now that I'm looking for it, I can't find it. Maybe it was just a feature request that I saw. Is there support for this and I'm just not seeing it? Ideally, I'd like to support sub-properties in data() using dot notation. Like this: $('a').data("user",{name: {first:"Tom",last:"Smith"},username: "tomsmith"}); $('a[:user.name.first=Tom]'); I also would like to support multiple data selectors, where only elements with ALL specified data selectors are found. The regular jquery multiple selector does an OR operation. For instance, $('a.big, a.small') selects a tags with either class big or small). I'm looking for an AND, perhaps like this: $('a').data("artist",{id: 3281, name: "Madonna"}); $('a').data("category","music"); $('a[:category=music && :artist.name=Madonna]'); Lastly, it would be great if comparison operators and regex features were available on data selectors. So $(a[:artist.id>5000]) would be possible. I realize I could probably do much of this using filter(), but it would be nice to have a simple selector format. What solutions are available to do this? Is Jame's Padolsey's the best solution at this time? My concern is primarily in regards to performance, but also in the extra features like sub-property dot-notation and multiple data selectors. Are there other implementations that support these things or are better in some way?

  Read the article

• C#: BackgroundWorker cloning resources?

  - by Dav

  The problem I've been struggling with this partiular problem for two days now and just run out of ideas. A little... background: we have a WinForms app that needs to access a database, construct a list of related in-memory objects from that data, and then display on a DataGridView. Important point is that we first populate an app-wide cache (List), and then create a mirror of the cache local to the form on which the DGV lives (using List constructor param). Because fetching the data takes a good few seconds (DB sits on a LAN server) to load, we decided to use a BackgroundWorker, and only refresh the DGV once the data is loaded. However, it seems that doing the loading via a BGW results in some memory leak... or an error on my part. When loaded using a blocking method call, the app consumes about 30MB of RAM; with a BGW this jumps to 80MB! While it may not seem as much anyway, our clients are not too happy about it. Relevant code Form private void MyForm_Load(object sender, EventArgs e) { MyRepository.Instance.FinishedEvent += RefreshCache; } private void RefreshCache(object sender, EventArgs e) { dgvProducts.DataSource = new List<MyDataObj>(MyRepository.Products); } Repository private static List<MyDataObj> Products { get; set; } public event EventHandler ProductsLoaded; public void GetProductsSync() { List<MyDataObj> p; using (MyL2SDb db = new MyL2SDb(MyConfig.ConnectionString)) { p = db.PRODUCTS .Select(p => new MyDataObj {Id = p.ID, Description = p.DESCR}) .ToList(); } Products = p; // tell the form to refresh UI if (ProductsLoaded != null) ProductsLoaded(this, null); } public void GetProductsAsync() { using (BackgroundWorker myWorker = new BackgroundWorker()) { myWorker.DoWork += delegate { List<MyDataObj> p; using (MyL2SDb db = new MyL2SDb(MyConfig.ConnectionString)) { p = db.PRODUCTS .Select(p => new MyDataObj {Id = p.ID, Description = p.DESCR}) .ToList(); } Products = p; }; // tell the form to refresh UI when finished myWorker.RunWorkerCompleted += GetProductsCompleted; myWorker.RunWorkerAsync(); } } private void GetProductsCompleted(object sender, RunWorkerCompletedEventArgs e) { if (ProductsLoaded != null) ProductsLoaded(this, null); } End! GetProductsSync or GetProductsAsync are called on the main thread, not shown above. Could it be that the GarbageCollector just gets lost with two threads? Or is it the task manager that shows incorrect values? Will be greateful for any responses, suggestions, criticism.

  Read the article

• Set maven to use archiva repositories WITHOUT using activeByDefault?

  - by Sam Levin

  I am very close to finally having a working setup with archiva and maven. The last thing that's really boggling me, is how to set up my internal and snapshot repositories - without using a profile which contains activeByDefault set to true. I am using a SUPER super pom - a company-wide pom which contains distributionManagement information for releases. I was thinking that I could specify the repositories in this pom, and configure the authentication settings in settings.xml? Can I use repositories tag without a profile? There should be no "profile" for my internal and snapshot repositories, as they will never change... What I'm trying to steer clear from, is using a "default" profile, which is active all the time. I hear activeByDefault is NOT a best practice and I don't intend to use it. With that said, how should I go about doing this? My internal repo is a mirror of the maven central repo, so I would like to lock down my developers to ONLY use our internal artifact server. Remember - I do NOT want a profile with activeByDefault set to true. I cannot stress this enough! Should I use Maven mirrors? Should I "add" additional repositories? If I take the repositories tag instead of the mirrors tag, will maven force builds to use ONLY my archiva settings, instead of the default maven central? Or is what I seek to accomplish able to be done using only the mirrors tag in maven? I know how to configure repo credentials when using repositories tag, but not with mirrors. How is this done? Is providing credentials for anything in mirrors tags the same as for anything in repositories tags? Am I missing something obvious? I've had it up to here with getting things up and running using maven. I know it will be worthwhile in the end, but it is surely causing me a ton of aggravation and resources seem to be sparse. Either that, or people are content using it however they please without regard to best-practices. Thank you

  Read the article

• PHP MVC Principles

  - by George

  I'm not using an off-the-shelf framework and don't particularly want to (nor d I want to go into the reasons why...). Anyway, onto my question(s), I hope it make sense.... I'm trying to get my head around what should go in the model and what should go in the controller. Originally I had the impression that a model class should represent an actual object (eg - a car from the cars table of a database) and model properties should mirror the database fields. However I'm now getting the feeling that I've got the wrong idea - should an instance of a model class represent an actual item, or should it contain a number of methods for doing stuff - sometimes to one car or sometimes to multiple cars based on my example earlier. For example I want to get all the cars from a the database and show them in the view. Am I right in think it should be along the lines of this? Controller File function list() { $cars = $this->model->get_all(); $this->view->add($cars); $this->view->render('cars-list'); } Model File function get_all() { // Use a database interaction class that I've written $cars = Database::select(); return $cars; } Now, if the car had a "status" field that was stored as an integer in the database and I wanted to change that to a string, where should that be done? By looping the SQL results array in the get_all() method in the model? Also, where should form validation live? I have written a validation class that works a little like this: $validator = new Validator(); $validator->check('field_name', 'required'); If the check fails, it adds an error message to the array in the Validator. This array of error messages would then get passed to the view. Should the use of my validator class go in model or the controller? Thanks in advance for for any help anyone can offer. If you know of any links to a simple MVC example / open source application that deals with basic CRUD, they would be much appreciated.

  Read the article

• FluentNHibernate Many-To-One References where Foreign Key is not to Primary Key and column names are

  - by Todd Langdon

  I've been sitting here for an hour trying to figure this out... I've got 2 tables (abbreviated): CREATE TABLE TRUST ( TRUSTID NUMBER NOT NULL, ACCTNBR VARCHAR(25) NOT NULL ) CONSTRAINT TRUST_PK PRIMARY KEY (TRUSTID) CREATE TABLE ACCOUNTHISTORY ( ID NUMBER NOT NULL, ACCOUNTNUMBER VARCHAR(25) NOT NULL, TRANSAMT NUMBER(38,2) NOT NULL POSTINGDATE DATE NOT NULL ) CONSTRAINT ACCOUNTHISTORY_PK PRIMARY KEY (ID) I have 2 classes that essentially mirror these: public class Trust { public virtual int Id {get; set;} public virtual string AccountNumber { get; set; } } public class AccountHistory { public virtual int Id { get; set; } public virtual Trust Trust {get; set;} public virtual DateTime PostingDate { get; set; } public virtual decimal IncomeAmount { get; set; } } How do I do the many-to-one mapping in FluentNHibernate to get the AccountHistory to have a Trust? Specifically, since it is related on a different column than the Trust primary key of TRUSTID and the column it is referencing is also named differently (ACCTNBR vs. ACCOUNTNUMBER)???? Here's what I have so far - how do I do the References on the AccountHistoryMap to Trust??? public class TrustMap : ClassMap<Trust> { public TrustMap() { Table("TRUST"); Id(x => x.Id).Column("TRUSTID"); Map(x => x.AccountNumber).Column("ACCTNBR"); } } public class AccountHistoryMap : ClassMap<AccountHistory> { public AccountHistoryMap() { Table("TRUSTACCTGHISTORY"); Id (x=>x.Id).Column("ID"); References<Trust>(x => x.Trust).Column("ACCOUNTNUMBER").ForeignKey("ACCTNBR").Fetch.Join(); Map(x => x.PostingDate).Column("POSTINGDATE"); ); I've tried a few different variations of the above line but can't get anything to work - it pulls back AccountHistory data and a proxy for the Trust; however it says no Trust row with given identifier. This has to be something simple. Anyone? Thanks in advance.

  Read the article

• How To Create A Download Quota.

  - by snikolov

  I need to create an handy file down loader which will count the amount of bytes downloaded and stop when it has exceed a preset limit. i need to mirror some files but i only have 7 gb per moth of bandwidth and i dont want to exceed the limit. Example limits can be in bytes or number of files, each user has their own limit, as well as a limit for Download Quota itself. So if you set a limit of 2 gigabytes for Download Quota, downloads stop at 2 gigabytes, even if you have 3 users with a limit of 1 gigabyte each. if ($range) { //pass client Range header to rapidshare // _insert($range); $cookie .= "\r\nRange: $range"; $multipart = true; header("X-UR-RANGE-Range: $range"); } //octet-stream + attachment => client always stores file header('Content-type: application/octet-stream'); header('Content-Disposition: attachment; filename="' . $fn . '"'); //always included so clients know this script supports resuming header("Accept-Ranges: bytes"); //awful hack to pass rapidshare the premium cookie $user_agent = ini_get("user_agent"); ini_set("user_agent", $user_agent . "\r\nCookie: enc=$cookie"); $httphandle = fopen($url, "r"); $headers = stream_get_meta_data($httphandle); //let's check the return header of rapidshare for range / length indicators //we'll just pass these to the client foreach ($headers["wrapper_data"] as $header) { $header = trim($header); if (substr(strtolower($header), 0, strlen("content-range")) == "content-range") { // _insert($range); header($header); header("X-RS-RANGE-" . $header); $multipart = true; //content-range indicates partial download } elseif (substr(strtolower($header), 0, strlen("Content-Length")) == "content-length") { // _insert($range); header($header); header("X-RS-CL-" . $header); } } //now show the client he has a partial download if ($multipart) header('HTTP/1.1 206 Partial Content'); flush(); $download_rate = 100; while (!feof($httphandle)) { // send the current file part to the browser $var_stat = fread($httphandle, round($download_rate * 1024)); $var12 = strlen($var_stat); ////////////////////////////////// echo $var_stat; ///////////////////////////////// // flush the content to the browser flush(); // sleep one second sleep(1); }

  Read the article

• usercontrol hosted in IE renders as a textbox

  - by coxymla

  On my ongoing saga to mirror the hosting of a legacy app on a clean box, I've hit my next snag. One page relies on a big .NET UserControl that on the new machine renders only as a big, greyed out textarea (greyed out vertical scrollbar on the right hand edge. Inspecting the source shows the expected object tag.) This is particularly tricky because nobody seems to know much about hosted UserControls and all the discussions data back to 2002-2004. The page is quite simple: <%@ Page language="c#" Codebehind="DataExport.aspx.cs" AutoEventWireup="false" Inherits="yyyyy.Web.DataExport" %> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" > <html> <head> <title>DataExport</title> <link rel="Configuration" href="/xxxxx/yyyyy/DataExport.config"> </head> <body style="margin:0px;padding:0px;overflow:hidden"> <OBJECT id="DataExport" style="WIDTH: 100%; HEIGHT: 100%; position:absolute; left: 0px; top:0px" classid="yyyyy.Common.dll#yyyyy.Controls.DataExport" VIEWASTEXT> </OBJECT> </body> </html> The config file referenced: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <sectionGroup name="yyyyy"> <section name="dataExport" type="yyyyy.Controls.DataExportSectionHandler,yyyyy.Common" /> </sectionGroup> </configSections> <yyyyy> <dataExport> <layoutFile>http://vm2/xxxxx/yyyyy/layout.xml</layoutFile> <webServiceUrl>http://vm2/xxxxx/yyyyy/services/yyyyy.asmx</webServiceUrl> </dataExport> </yyyyy> </configuration> What I've checked: Security permissions should be OK, the site is trusted and adding a URL exception to grant FullTrust doesn't change anything. Config file is acessible over the web, layout.xml is accessible, ASMX shows the expected command list Machine.config grants GET permission for the usercontrol.config file. What perhaps looks fishy to me: The DataExport UserControl references Aspose.Excel to generate the spreadsheets it exports. When I navigate to the page and get a blank textbox, then run gacutil /ldl, nothing is in the local download cache. On the working machine, running the same command after viewing the page shows a laundry list of DLLs including the control DLL and the Aspose DLL.

  Read the article

• Is this a valid pattern for raising events in C#?

  - by Will Vousden

  Update: For the benefit of anyone reading this, since .NET 4, the lock is unnecessary due to changes in synchronization of auto-generated events, so I just use this now: public static void Raise<T>(this EventHandler<T> handler, object sender, T e) where T : EventArgs { if (handler != null) { handlerCopy(sender, e); } } And to raise it: SomeEvent.Raise(this, new FooEventArgs()); Having been reading one of Jon Skeet's articles on multithreading, I've tried to encapsulate the approach he advocates to raising an event in an extension method like so (with a similar generic version): public static void Raise(this EventHandler handler, object @lock, object sender, EventArgs e) { EventHandler handlerCopy; lock (@lock) { handlerCopy = handler; } if (handlerCopy != null) { handlerCopy(sender, e); } } This can then be called like so: protected virtual void OnSomeEvent(EventArgs e) { this.someEvent.Raise(this.eventLock, this, e); } Are there any problems with doing this? Also, I'm a little confused about the necessity of the lock in the first place. As I understand it, the delegate is copied in the example in the article to avoid the possibility of it changing (and becoming null) between the null check and the delegate call. However, I was under the impression that access/assignment of this kind is atomic, so why is the lock necessary? Update: With regards to Mark Simpson's comment below, I threw together a test: static class Program { private static Action foo; private static Action bar; private static Action test; static void Main(string[] args) { foo = () => Console.WriteLine("Foo"); bar = () => Console.WriteLine("Bar"); test += foo; test += bar; test.Test(); Console.ReadKey(true); } public static void Test(this Action action) { action(); test -= foo; Console.WriteLine(); action(); } } This outputs: Foo Bar Foo Bar This illustrates that the delegate parameter to the method (action) does not mirror the argument that was passed into it (test), which is kind of expected, I guess. My question is will this affect the validity of the lock in the context of my Raise extension method? Update: Here is the code I'm now using. It's not quite as elegant as I'd have liked, but it seems to work: public static void Raise<T>(this object sender, ref EventHandler<T> handler, object eventLock, T e) where T : EventArgs { EventHandler<T> copy; lock (eventLock) { copy = handler; } if (copy != null) { copy(sender, e); } }

  Read the article

• Log4j: Issues about the FallbackErrorHandler

  - by rdogpink

  I am working on a client-server-application and wanted to implement a flexible Loggingframework, so I chose log4j, which doesn´t really evolve anymore, but it is still handy framework. Because the Logging happens along the network, i wanted a solution for the case, that the network drive isn´t available, so the Logger has to change its destination file(s). Now I wanted to use the FallbackErrorHandler (configured with a XML-File) from the Log4j-library and the implementation worked: When my network drive isn´t available, it switches to a local Logfile, so no logging should be lost. But I headded two problems since yesterday and couldn´t figure or find out, how to solve it. No return to initial Logging Configuration: When the network drive is on again and the Logger could write to the old destinations, log4j still logs at the local drive and I can´t figure out, how to notify the original (primary) Logger to start again. I also tried to attach a second Appender to the ErrorHandler, which should mirror the failed primary Logger, that it tries to write on the network destination and when the network is on again, it logs in both files, on the local and on the network drive. But unfortunately it didn´t work out, I only got a failure message that the ErrorHandler-content doesn´t fit. log4j:WARN The content of element type "errorHandler" must match "(param*,root-ref?,logger-ref*,appender-ref?)". This is the responsible code. <appender name="TraceAppender" class="org.apache.log4j.DailyRollingFileAppender"> <!-- The second appender-ref "TestAppender" leads to the error. --> <errorHandler class="org.apache.log4j.varia.FallbackErrorHandler"> <logger-ref ref="com.idoh"/> <appender-ref ref="TraceFallbackAppender"/> <appender-ref ref="TestAppender"/> </errorHandler> <param name="datePattern" value=".yyyy-MM-dd" /> <param name="file" value="logs/Trace.txt" /> <layout class="org.apache.log4j.PatternLayout"> <param name="ConversionPattern" value="%-6r %d{HH:mm:ss,SSS} [%t] %-5p - %m%n"/> </layout> </appender> So, how could I trigger log4j to reset to initial configuration or hold a second appender parallel to the "Local-Logger". My Application should work by itself and shouldn´t have to be restarted often. First Error message is swallowed: I recognized, that the first message, which leads to the switching between the primary logger and the FallbackErrorHandler (for example a logging-request to a readonly-File), is swallowed, so neither the primary logger logs it (because it can´t) nor the backup-Logger knows what it missed. So anybody else ran in this problem and could solve it? Or has any suggestions?

  Read the article

• Feedback on Optimizing C# NET Code Block

  - by Brett Powell

  I just spent quite a few hours reading up on TCP servers and my desired protocol I was trying to implement, and finally got everything working great. I noticed the code looks like absolute bollocks (is the the correct usage? Im not a brit) and would like some feedback on optimizing it, mostly for reuse and readability. The packet formats are always int, int, int, string, string. try { BinaryReader reader = new BinaryReader(clientStream); int packetsize = reader.ReadInt32(); int requestid = reader.ReadInt32(); int serverdata = reader.ReadInt32(); Console.WriteLine("Packet Size: {0} RequestID: {1} ServerData: {2}", packetsize, requestid, serverdata); List<byte> str = new List<byte>(); byte nextByte = reader.ReadByte(); while (nextByte != 0) { str.Add(nextByte); nextByte = reader.ReadByte(); } // Password Sent to be Authenticated string string1 = Encoding.UTF8.GetString(str.ToArray()); str.Clear(); nextByte = reader.ReadByte(); while (nextByte != 0) { str.Add(nextByte); nextByte = reader.ReadByte(); } // NULL string string string2 = Encoding.UTF8.GetString(str.ToArray()); Console.WriteLine("String1: {0} String2: {1}", string1, string2); // Reply to Authentication Request MemoryStream stream = new MemoryStream(); BinaryWriter writer = new BinaryWriter(stream); writer.Write((int)(1)); // Packet Size writer.Write((int)(requestid)); // Mirror RequestID if Authenticated, -1 if Failed byte[] buffer = stream.ToArray(); clientStream.Write(buffer, 0, buffer.Length); clientStream.Flush(); } I am going to be dealing with other packet types as well that are formatted the same (int/int/int/str/str), but different values. I could probably create a packet class, but this is a bit outside my scope of knowledge for how to apply it to this scenario. If it makes any difference, this is the Protocol I am implementing. http://developer.valvesoftware.com/wiki/Source_RCON_Protocol

  Read the article

• What do I need to distribute (keys, certs) for Python w/ SSL-socket connection?

  - by fandingo

  I'm trying to write a generic server-client application that will be able to exchange data amongst servers. I've read over quite a few OpenSSL documents, and I have successfully setup my own CA and created a cert (and private key) for testing purposes. I'm stuck with Python 2.3, so I can't use the standard "ssl" library. Instead, I'm stuck with PyOpenSSL, which doesn't seem bad, but there aren't many documents out there about it. My question isn't really about getting it working. I'm more confused about the certificates and where they need to go. Here are my two programs that do work: Server: #!/bin/env python from OpenSSL import SSL import socket import pickle def verify_cb(conn, cert, errnum, depth, ok): print('Got cert: %s' % cert.get_subject()) return ok ctx = SSL.Context(SSL.TLSv1_METHOD) ctx.set_verify(SSL.VERIFY_PEER|SSL.VERIFY_FAIL_IF_NO_PEER_CERT, verify_cb) # ?????? ctx.use_privatekey_file('./Dmgr-key.pem') ctx.use_certificate_file('Dmgr-cert.pem') # ?????? ctx.load_verify_locations('./CAcert.pem') server = SSL.Connection(ctx, socket.socket(socket.AF_INET, socket.SOCK_STREAM)) server.bind(('', 50000)) server.listen(3) a, b = server.accept() c = a.recv(1024) print(c) Client: from OpenSSL import SSL import socket import pickle def verify_cb(conn, cert, errnum, depth, ok): print('Got cert: %s' % cert.get_subject()) return ok ctx = SSL.Context(SSL.TLSv1_METHOD) ctx.set_verify(SSL.VERIFY_PEER, verify_cb) # ?????????? ctx.use_privatekey_file('/home/justin/code/work/CA/private/Dmgr-key.pem') ctx.use_certificate_file('/home/justin/code/work/CA/Dmgr-cert.pem') # ????????? ctx.load_verify_locations('/home/justin/code/work/CA/CAcert.pem') sock = SSL.Connection(ctx, socket.socket(socket.AF_INET, socket.SOCK_STREAM)) sock.connect(('10.0.0.3', 50000)) a = Tester(2, 2) b = pickle.dumps(a) sock.send("Hello, world") sock.flush() sock.send(b) sock.shutdown() sock.close() I found this information from ftp://ftp.pbone.net/mirror/ftp.pld-linux.org/dists/2.0/PLD/i586/PLD/RPMS/python-pyOpenSSL-examples-0.6-2.i586.rpm which contains some example scripts. As you might gather, I don't fully understand the sections between the " # ????????." I don't get why the certificate and private key are needed on both the client and server. I'm not sure where each should go, but shouldn't I only need to distribute one part of the key (probably the public part)? It undermines the purpose of having asymmetric keys if you still need both on each server, right? I tried alternating removing either the pkey or cert on either box, and I get the following error no matter which I remove: OpenSSL.SSL.Error: [('SSL routines', 'SSL3_READ_BYTES', 'sslv3 alert handshake failure'), ('SSL routines', 'SSL3_WRITE_BYTES', 'ssl handshake failure')] Could someone explain if this is the expected behavior for SSL. Do I really need to distribute the private key and public cert to all my clients? I'm trying to avoid any huge security problems, and leaking private keys would tend to be a big one... Thanks for the help!

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36  | Next Page >