Search Results

Search found 3536 results on 142 pages for 'paypal express'.

Page 33/142 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • WPA2 authentication fails using USB network devices (Linksys and Rosewill)

    - by Greg Youtz
    Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

    Read the article

  • How to store session values with Node.js and mongodb?

    - by Tirithen
    How do I get sessions working with Node.js, [email protected] and mongodb? I'm now trying to use connect-mongo like this: var config = require('../config'), express = require('express'), MongoStore = require('connect-mongo'), server = express.createServer(); server.configure(function() { server.use(express.logger()); server.use(express.methodOverride()); server.use(express.static(config.staticPath)); server.use(express.bodyParser()); server.use(express.cookieParser()); server.use(express.session({ store: new MongoStore({ db: config.db }), secret: config.salt })); }); server.configure('development', function() { server.use(express.errorHandler({ dumpExceptions: true, showStack: true })); }); server.configure('production', function() { server.use(express.errorHandler()); }); server.set('views', __dirname + '/../views'); server.set('view engine', 'jade'); server.listen(config.port); I'm then, in a server.get callback trying to use req.session.test = 'hello'; to store that value in the session, but it's not stored between the requests. It probobly takes something more that this to store session values, how? Is there a better documented module than connect-mongo?

    Read the article

  • Problems installing SQL Server 2008 on Windows 7 Pro

    - by Trindaz
    I'm having no luck. I've tried installing SQL Server 2008 Express on my Windows 7 Pro box about 4 times now. Each time it installs the 'setup files required' then does nothing. All I can do is click the 'New ... or Add Features...' link to try starting again but get the same results each time. Any developers experienced this before?

    Read the article

  • Visual studio 2010 and Sql Server

    - by Mendy
    Do visual studio 2010 include already Sql Server instance, or I need to install Sql Server developer edition to develop an application that need a Sql Server db. If it installs a Sql Server express edition, it this enough or it's better to have Sql Server developer edition?

    Read the article

  • Refresh tables in Visual Studio?

    - by Curtis White
    How can I refresh the tab in Visual Studio for a database table? Currently I re-open the table but I would think there is a way to refresh the table. I am referring to tables opened via the Server Explorer/SQL Express. The clear results does not seem to refresh.

    Read the article

  • Does VS2010 does not install SQL Server during installation

    - by Greg
    Hi, Just confirming -does VS2010 does not install SQL Server during installation? I'm assuming no. This being the case I therefore need to download a copy of SQL Express 2005 or something to develop against on my windows XP home PC? Is this correct? Or would the Dev edition of SQL Server 2005 run/install on Windows XP Home? thanks

    Read the article

  • JavaScript method to write to Microsoft Visual Web Developer Debugger?

    - by Josh
    I generally test my web apps with Firefox and use Firebug. I love Firebug. But when I'm testing JavaScript code in IE I use the debugger in Microsoft's Visual Web Developer 2008 Express Edition. I would love to have an equivalent to Firebug's console.log methods which would allow me to log messages to Visual Web Developer. Any way to log messages to the error list/messages list/output pane using JavaScript?

    Read the article

  • Node.js A Good authentication module ? or whats the proper way to authenticate users?

    - by Mohamed Ahmed
    I'm learning Node.js and looking forward to create a simple web application which will be based on Express and I was thinking of something like creating user groups and each group has its own users and each group has its own permissions (Just like ACL in Cakephp) So can anyone recommend a good module or whatever to do so ? Also I'm a little curious about security and how these passwords are going to be saved and what type of encryption the passwords will be encrypted in. Thanks :)

    Read the article

  • need help to solve the sql error.

    - by hina
    i want to send SMS using SQL server 2008 express, and using the video tutorial for help. i found an error while testing, i.e. ERROR: Microsoft SQL native client: communication link failure. kindly tell me how to resolve this error. i used the SQL command: "sqlcmd -S np:\127.0.0.1\pipe\MSSQL$SQLEXPRESS\sql\qurey"

    Read the article

  • AVerMedia A309-B mini-PCI to AVerMedia A317 Mini PCI card

    - by Chris
    I got an HP pavilion hdx 16 1060ED laptop (Windows Vista) with a a DVB-T tuner card Now I would like a hybrid or analog turner card in it. According to the HP data of a more expensive variant, a AVerMedia A317 Mini PCI card installed is installed. My system has a AVerMedia A309-B mini-PCI placed in the system. my questions: 1 - is it possible to replace it with a expensive one? (AVerMedia A317 Mini PCI card) and 2 - what will this cost? 3 - I can build it myself and what can I do with the old card I like to hear from you.

    Read the article

  • Can I flash a PCI-E device's Firmware in a VM if the VM has exclusive IOMMU access?

    - by RibaldEddie
    I have a PCI-E Dell Perc 6/i RAID card that I'd like to flash with the latest firmware. Apparently I need either a Redhat / Centos OS or Windows in order to flash the firmware, but I have a VMWare 5.0.1 ESX hypervisor installed on the box and a CentOS guest OS. My motherboard support IOMMU and I have successfully used VMWare's PCI Passthrough feature to give VMs exclusive access to a PCI-E device. Is it safe to flash the firmware of a PCI-E device if that device is passed through to a single VM using the passthrough feature of VMware? Or should I boot one of the supported OSes directly on the bare metal?

    Read the article

  • Does the Intel DX79TO motherboard support x8 devices (SAS HBAs) on PCIe x16 slots?

    - by Zac B
    Context: I have an Intel DX79TO motherboard and a Sun SAS3081E-S/LSI 1060E-S HBA card with a PCIe x8 interface. I plug the HBA into my mobo next to my graphics card, and the HBA power lights illuminate, but the BIOS and OSes (tried Linux, ESXi, Win7) don't see the HBA at all. Question: Does the DX79TO motherboard support non-x16/non-GPU devices in its PCIe x16 slots? According to this question, some consumer motherboards don't support this, but I can't figure out whether or not this motherboard/family does. The answer will affect whether I buy a new motherboard or RMA the SAS card, with money attached to each course, so I figured I'd ask here first. What I've Tried: I've read the spec/manuals for the motherboard and the HBA, and I didn't see anything regarding whether or not the x16 slots were back-compatible to lower lane widths/non graphics-card devices, or whether or not the card could run in wider slots than x8. I've tried contacting Intel, but that was over a month ago and I haven't yet heard anything back except an automated "we got your email!" message.

    Read the article

  • How do i have 4GB of video memory with a 1GB video card?

    - by Tomas Spc Yaczik
    I ran the direct X diagnostic tool to take a look at my graphics capabilities and its telling me that the approximate video memory is clocked in at 4096MB. That doesn't make any sense, how is that possible? The only things that i can think of were that DirectX was inaccurate so i looked at the graphics statistics of my computer on CPU-Z which was included with the motherboard and that's telling me i have "negative" 1988MB. Not only is that not 4096MB, but its giving me a negative number and i know for a fact that you can't have a negative amount of memory???!!! The only things i can think of that would be amplifying my video memory output is the PCIe 3.0 bus, or that the motherboard is somehow including the on board video chip set with the video card which only then is only 2GB of video memory, which still has to be being amplified by something. Any suggestions?

    Read the article

  • How to stabilize PCIe sound card in its card slot?

    - by Josh
    I have a Soundblaster Recon 3d Fatal1ty sound card and randomly every once in a while my computer won't recognize it. I am almost 100% sure it is something to do with its PCIe slot. After I turn off the computer and just wiggle the card a bit, the computer recognizes the card once I restart. I can't really try it in the other PCIe slot because the video card gets in the way. It is a Biostar TA970XE motherboard. I don't know if it is something to do with the pins on the actual card or if it is something to do with the slot. I couldn't find any related issues about this card on Google. Is there anything I can do to help secure the card in its slot so that my computer will recognize it? Any help is appreciated.

    Read the article

  • PCI-e v2.0 video card in a PCI-e v1.0 slot? [closed]

    - by Kevin
    Possible Duplicate: Will a PCI-E V2.0 Graphics Card work with a PCI-E V1.0 Motherboard? Will a PCI-e 2.0 card work in a PCI-e 1.0 motherboard? Currently I've got an older ASUS M2N-E motherboard, and I would like get a newer video card (GTX 280 or similar) which will last me a while after I upgrade my motherboard at some point in the future. I currently have a 6600 GT which has served me well for a long time, but it's time to upgrade.

    Read the article

  • 5v PCI to PCI-X or PCIe adapter?

    - by SiegeX
    We unfortunately have a very expensive ($10K) full-length 5 volt PCI card that we would like to use in the same system as another expensive PCI-X card. As luck would have it, it seems that PCI-X is not backwards compatible with 5v PCI cards. It would be a real shame to have to order a whole new server just to accommodate these two cards together. Does there exist any internal converter/adapter that will allow one to place a full-length 5v PCI card into either a PCI-X or PCIe slot? I've found an external expansion box that suits our needs but it's 1) External and 2) $1100. The only internal adapters I've been able to find go from Low-profile PCI - PCIe; nothing that seems to support full-height, full-length PCI cards.

    Read the article

  • How to configure SSL on an instance of SQL Server to allow dedicated users to remotely access it?

    - by The Good Boy
    I have configured the instance of SQL Server to allow dedicated users to access it remotely. Connection string Data Source = 192.168.1.2,1433\sqlexpress;etc... has been tested and works. However, I have not configured the SSL to secure the communication. How to configure SSL on an instance of SQL Server to allow dedicated users to remotely access it? edit 1 The dedicated user will administer its database using Sql Server Management Studio. What I want to do is to secure the communication when he/she administers the database using Sql Server Management Studio.

    Read the article

  • How do you test if a PCI slot is working - motherboard diagnostic software?

    - by Adam
    I suspect that my motherboard is bad, and that my PCI-E slot is not working. I have a Gigabyte motherboard that had a Hauppage 2250 working fine in the PCI-E slot for many months. However - recently - would not get TV channels that I used to get --- until finally Media center cant detect any channels at all. Got a new tuner card (ATI 350 card) - cant detect any channels. The cable signal is good - I have it connected directly to a TV - all channels come in clear. SO that is why I suspect a motherboard problem. Are there any motherboard diagnostic scanner utilities that can verify I need a new motherboard

    Read the article

  • SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

    - by V M
    After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >