Search Results

Search found 6706 results on 269 pages for 'power supply'.

Page 33/269 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • xset: unable to open display

    - by user287878
    for the longest time after about 5 minutes my screen would blank out. Now the screen will go blank after 5 minutes but then 2 seconds after that it will light up white and keep the laptop backlighting on. I didnt change any settings to my knowledge it just happened randomly after powering it on one day and has occurred since then. I wish to resort back to blanking the screen out completely since i leave this computer on all the time and its hard to sleep with a huge white light all the time. "xset dpms force off" just yeilds me ---- xset: unable to open display ""

    Read the article

  • Can I stop battery charging at say 80% and switch to AC?

    - by elim
    While I was looking for a battery management utility for my Dell E5420, I came to read this post - How can I limit battery charging to 80% capacity? . Sofar, I haven't found one that relates to my laptop. So, I wonder now if any battery manager utility can be found for my laptop specified above. I would be happy if someone could point me if such utility is available under Ubuntu 12.04 that can stop charging a battery at a certain percentage and to ONLY use A/C mode. Again, to start using battery mode when the A/C is off or when the battery level reaches at certain level. Thanks for all your help. Elim.

    Read the article

  • Power Law distribution for a given exponent in C# using MathNet

    - by Eric Tobias
    Hello! I am currently working on a project where I need to generate multiple values (floats or doubles preferably) that follow a power law distribution with a given exponent! I was advised to use the MathNet.Iridium library to help me. The problem I have is that the documentation is not as explicit as it should be if there is any! I see multiple distributions that fit the general idea of the power law distribution but I cannot pinpoint a good distribution to use with a certain exponent as a parameter. Does anybody have more experience in that matter and could give me some hints or advice?

    Read the article

  • programmatically controlling power sockets in the UK

    - by cartoonfox
    It's very simple. I want to plug a lamp into the UK mains supply. I want to be able to power it on and off from software - say from serial port commands, or by running a command-line or something I can get to from ruby or Java. I see lots written about how to do this with X10 with American power systems - but has anybody actually tried doing this in the UK? If you got this working: 1) Exactly what hardware did you use? 2) How do you control it from software? Thanks!

    Read the article

  • SurfaceView for Camera Preview won't get destroyed when pressing Power-Botton

    - by for3st
    I want to implement a camera preview. For that I have a custom View CameraView extends ViewGroup that in the constructor programatically creates an surfaceView. I have the following components (higly simplified for beverity): ScannerFragment.java public View onCreateView(..) { //inflate view and get cameraView } public void onResume() { //open camera -> set rotation -> startPreview (in a thread) -> //set preview callback -> start decoding worker } public void onPause() { // stop decoding worker -> stop Preview -> release camera } CameraView.java extends ViewGroup public void setUpCalledInConstructor(Context context) { //create a surfaceview and add it to this viewgroup -> //get SurfaceHolder and set callback } /* SurfaceHolder.Callback */ public void surfaceCreated(SurfaceHolder holder) { camera.setPreviewDisplay(holder); } public void surfaceDestroyed(SurfaceHolder holder) { //NOTHING is done here } public void surfaceChanged(SurfaceHolder holder, int format, int w, int h) { camera.getParameters().setPreviewSize(previewSize.width, previewSize.height); } fragment_scanner.xml <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent"> <com.myapp.camera.CameraView android:id="@+id/cameraPreview" android:layout_width="match_parent" android:layout_height="match_parent"/> </RelativeLayout> I think I have set the lifecycle correct (getting resources onResume(), releasing it onPause() roughly said) and the following works just fine: pressing home and returning pressing Taskswitcher and returning rotation But one thing doesn't work and that is when I press the power-button on the device and then return to the camera-preview. The result is: the preview is stuck with the image that was last captured before button was pressed. If I rotate it works fine again, since it will get through the lifecycle. After some research I found out that this is probably due to the fact that surfaceView won't get destroyed when the power-button is pressed, i.e. SurfaceHolder.Callback.surfaceDestroyed(SurfaceHolder holder) won't be called. And in fact when I compare the (very verbose) log output of the home-button-case and the power-button-case it's the same except that 'surfaceDestroyed' won't get called. So far I found no solution whatsoever to work around it. I purposely avoid any resource cleaning code in my surfaceDestroyed(), but this does not help. My idea was to manually destroy the surfaceView like asked in this question but this seems not possible. I also tested other applications with surfaceViews/cameras and they don't seem to have this issue. So I would appreciate any hints or tips on that.

    Read the article

  • audio power on AudioQueue

    - by Tomoyuki
    Hi everyone. I'm now creating an Application using speech recognition.To check the Audio Power coming in through the microphone, I wrote a method as follows. -(void)checkPower(AudioqueRef)queue{ UInt32 expectedSize= sizeof(AudioQueueLevelMeterState); AudioQueueGetProperty(queue, kAudioQueueProperty_CurrentLevelMeter, audioLevels, expectedSize); NSLog(@"average:%f peak:%f",audioLevels.mAveragePower,audioLevels.mPeakPower); } I found that sometimes mAveragePower was larger than mPeakPower, and when mAveragePower was 1.0, in other words, averagePower is regarded as max, mPeakPower was lower than 1.0. I think that generally this result is inpossible. please Let me know if you have any information about sound power on CoreAudio. thanks.

    Read the article

  • How to compute power spectrum from 2D FFT

    - by user1452954
    I've encounter a problem when doing my lab assignment, not sure how to implement this: Use fft2 on a gray image and to do Fourier transform and then compute the power spectrum. This is my code so far: >> Pc = imread('pckint.jpg'); >> whos Pc; Name Size Bytes Class Attributes Pc 256x256 65536 uint8 >> imshow(Pc); >> result = fft2(Pc); My question is from the result. How to computer power spectrum?

    Read the article

  • Whats after the iPAD?? check out the new Augmented Reality Glasses

    - by Stephen Slade
    Everyone loves their new iPad! The rich features, portability, plethora of apps and ease of use make this the new clipboard on the factory floor or electronic notebook for meetings. But how many business people walk into an hours meeting and really start typing notes on their PC?..yes some do, but for the general business public there are new technologies coming down the road. The iPad is the latest holla-hoop; and the next gen device I feel is the Augmented Reality Glasses. Your glasses will be your screen, have an earpiece, be wireless enabled, your smart watch be your electronics and maybe your belt can be an extended battery pack.  I'm anxious to test one of these. The TELEGRAPH writes:  "Android software is believed to power the gadget, enabling similar features to its smartphone and tablets. A 3G /4G data connection, motion sensors and GPS navigation are believed to be included in the device's capabilities. The augmented-reality glasses are the culmination of a two-year initiative called Project Glass, developed in the clandestine Google X lab, ..in Mountain View, ...The New York Times suggested they could cost between $250-$500 " http://www.telegraph.co.uk/technology/news/9187547/Google-unveils-augmented-reality-glasses.html

    Read the article

  • Simple electric DC question. Currency consumption

    - by Bobb
    Suppose you have DC power supply and a consumer connected to it (i.e. computer PSU and a hard drive). Suppose PSU which was supplied with the consumer has output 5V 1A. So I assume that the consumer should not consume more than 1A. Suppose the original PSU is broken now and I want to replace it with the one I have which is 5V 10A. My guess is that current is something which depends on the consumer. So if the consumer consumes normally 1A then it will not consume more than that even if it is connected to 10A PSU. In other word - am I right assuming that the consumer will not burn out being connected to a power supply with higher current output? P.S. my understanding is that voltage is something independent from the consumer. If you give it higher voltage it will burn (voltage is from PSU to the consumer). However current must be in opposite - consumer sucks as much current as it need not as much as PSU can provide (of course given that max PSU current is greater than the consumer needs)

    Read the article

  • Simple electric DC question. Current consumption

    - by Bobb
    Suppose you have DC power supply and a consumer connected to it (i.e. computer PSU and a hard drive). Suppose PSU which was supplied with the consumer has output 5V 1A. So I assume that the consumer should not consume more than 1A. Suppose the original PSU is broken now and I want to replace it with the one I have which is 5V 10A. My guess is that current is something which depends on the consumer. So if the consumer consumes normally 1A then it will not consume more than that even if it is connected to 10A PSU. In other word - am I right assuming that the consumer will not burn out being connected to a power supply with higher current output? P.S. my understanding is that voltage is something independent from the consumer. If you give it higher voltage it will burn (voltage is from PSU to the consumer). However current must be in opposite - consumer sucks as much current as it need not as much as PSU can provide (of course given that max PSU current is greater than the consumer needs)

    Read the article

  • Why is my computer randomly restarting? How can I fix it?

    - by kinglime
    I have a custom built desktop computer that I've been using since about a year ago. The main specs are: ASUS P8Z68-V LE Motherboard Intel Core i7 2600k Corsair Vengeance 16GB Ram ASUS ENGTX570 GPU Corsair TX650M PSU I was running an overclock of 4.4ghz for my cpu (I have a Hyper212 EVO) and 1600mhz for my RAM but have it currently turned off due to my issues. I am also currently running Windows 8 but this problem occured in Windows 7 too. Basically my issue is that seemingly randomly, with no pattern my PC will reset itself and ASUS Anti-Surge will alert me that something went wrong. This issue is not related to system stress. I can run it fine for an hour maxxed out on Prime95 then later I can be watching a mere YouTube video when it will randomly reset. This has been occurring probably for the last two weeks and it seems to be getting worse. I believe this might be related to the power supply but when I monitor it in the bios and in Windows it appears to be putting out the proper voltages. Also possibly related or not but my Nvidia drivers frequently temporarily fail and then warn me of some kind of kernel error? If I have to buy a new power supply that is what I'll do but I want to make damn sure that's the only issue at hand. Thank you everyone in advance, please help me diagnose the issue and tell me what I can do to fix it. If you need any additional info about my setup please ask me.

    Read the article

  • Nginx + CodeIgniter + Invision power board rewrite rule probem.

    - by Ufuk
    Hello, I have a setup where I have a folder structre like: / /application /system /forum index.php My ngix configuration: if (!-f $request_filename) { rewrite ^/(.*)$ /index.php/$1 last; } location ~ /index.php { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /var/www/vhosts/mydomain.com/httpdocs/index.php; } This setup works correctly and redirects urls to correct controller of codeigniter yet it does also forward www.mydomain.com/forum to codeigniter, which eventually shows a 404 page of CodeIgniter. Does anyone know the correct configuration for my setups? Thank you.

    Read the article

  • Compatibility of ESX 4 and LTO 3 with LSI2032 Dell Power Edge

    - by dbaur
    Hello, does anybody know something about the compatibility of an LTO 3 Tapedrive (PV HH LTO 3 400GB) attached to an LSI2032 SCSI-Controller? These devices are added to an Dell PowerEdge T610 Server which is listed in the certified Compatibility Guide. I can`t find any information for this controller and this tapdevice. Or are they automaticly compatible because they are options for an compatible Server? greetings Dennis

    Read the article

  • Diagnosing laptop charging issues

    - by Ben
    My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

    Read the article

  • Low framerate on background apps

    - by user1698923
    My problem is that when a game is running in the foreground, in Full Screen mode, any applications on my second monitor (such as youtube videos, videos, not app specific) drop their frame-rate to about 2-3 FPS. It seems like some sort of power management option that I can't track down. As far as I can tell, it's not due to the GPU not being able to keep up. For instance, my PC can play League of Legends at about 280FPS when the framerate is uncapped. If i cap it at 60FPS using the in-game option, it has no affect on the performance of the background app. Summary Operating System Windows 8 Pro 64-bit CPU Intel Core i7 3820 @ 3.60GHz 42 °C Sandy Bridge-E 32nm Technology RAM 12.0GB Triple-Channel DDR3 @ 533MHz (7-7-7-20) Motherboard Gigabyte Technology Co., Ltd. X79-UD3 (SOCKET 0) 37 °C Graphics DELL U2713HM (2560x1440@59Hz) DELL U2713HM (2560x1440@59Hz) 1280MB NVIDIA GeForce GTX 570 (Gigabyte) 58 °C Hard Drives 212GB Volume0 (RAID) 1863GB Western Digital WDC WD20EARS-00MVWB0 (SATA) 36 °C 1863GB Western Digital WDC WD20EARS-00MVWB0 (SATA) 34 °C Optical Drives No optical disk drives detected Audio ASUS Xonar Essence STX Audio Device Operating System Windows 8 Pro 64-bit Computer type: Desktop Graphics Monitor 1 Name DELL U2713HM on NVIDIA GeForce GTX 570 Current Resolution 2560x1440 pixels Work Resolution 2560x1400 pixels State Enabled, Output devices support Multiple displays Extended, Secondary, Enabled Monitor Width 2560 Monitor Height 1440 Monitor BPP 32 bits per pixel Monitor Frequency 59 Hz Device \\.\DISPLAY4\Monitor0 Monitor 2 Name DELL U2713HM on NVIDIA GeForce GTX 570 Current Resolution 2560x1440 pixels Work Resolution 2560x1400 pixels State Enabled, Output devices support Multiple displays Extended, Primary, Enabled Monitor Width 2560 Monitor Height 1440 Monitor BPP 32 bits per pixel Monitor Frequency 59 Hz Device \\.\DISPLAY5\Monitor0 NVIDIA GeForce GTX 570 Manufacturer NVIDIA Model GeForce GTX 570 GPU GF110 Device ID 10DE-1086 Revision A2 Subvendor Gigabyte (1458) Series GeForce GTX 500 Current Performance Level Level 3 Current GPU Clock 845 MHz Current Memory Clock 1900 MHz Current Shader Clock 1690 MHz Voltage 0.988 V Technology 40 nm Die Size 520 mm² Release Date Dec 07, 2010 DirectX Support 11.0 OpenGL Support 5.0 Bus Interface PCI Express x16 Temperature 57 °C Driver version 9.18.13.2018 BIOS Version 70.10.55.00.01 ROPs 40 Shaders 512 unified Memory Type GDDR5 Memory 1280 MB Bus Width 64x5 (320 bit) Filtering Modes 16x Anisotropic Noise Level Moderate Max Power Draw 219 Watts Count of performance levels : 3 Level 1 - "Default" GPU Clock 50 MHz Memory Clock 135 MHz Shader Clock 101 MHz Level 2 - "2D Desktop" GPU Clock 405 MHz Memory Clock 324 MHz Shader Clock 810 MHz Level 3 - "3D Applications" GPU Clock 845 MHz Memory Clock 1900 MHz Shader Clock 1690 MHz Things I've tried: 1) Updating the graphics driver 2) Setting windows power mode to High Performance 3) Reset Nvidia Global Performance settings to default

    Read the article

  • USB ports causing Wireless and Mobile Phone tethering drop out

    - by chrolli
    I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

    Read the article

  • Laserjet Experts: How many power cycles per month?

    - by marienbad
    I recently got a nice Laserjet 8100DN for my house. I will probably never print more than 1% of its rated monthly duty cycle. But it runs some fairly noisy fans 24/7 if it's left on, so I am in the habit of turning the machine off as soon as I'm done with it. So, for all you who have a lot of experiencing administrating workgroup LaserJets, do you think I'll end up killing it from too many on-off cycles?

    Read the article

  • Windows 7 remains powered on when restarting

    - by BombDefused
    I'm running windows 7 x64 on an MSI P67A-GD53 motherboard, in an Antec P280 Super Midi Towercase with a Corsair 650w PSU. I've just installed a second instance of windows 7 x64 on a separate disk (this is to keep my games separate from my work OS). The problem is that it appears now that I cannot restart from either instance of Windows 7. The shut down command, and sleep commands work as expected. When I try to restart, the shutdown happens but the system never reboots. Everything remains powered on, until I hold down the power button to force the power off. Ithink (but am not 100% sure) this has only started since I installed the second OS, and am assuming this has something to do with the motherboard needing to know which OS to run up again? Some other forums I've read suggest that the PSU has a major role in restart and could be at fault. Changing the boot order of the disks in the BIOS does not change anything. Any suggestions greatfully recieved! Update: I now have a reproduceable issue: I think the secondary OS install may have been a red herring. It was when windows tried to reboot during the install that I noticed the issue. After playing around with installing drivers, and rebooting many many times, I have found that it is the OC genie setting on the MSI motherboard that seems to trigger the problem. This makes sense as I only started using the OC genie feature a couple of weeks ago, and probably hadn't used restart in that time. However... simply turning off OC genie does not make the issue go away. I have to turn off OC genie, shutdown, start enter bios, go to the "Save and Exit" menu "Restore Defaults" yes to "Load optimized defaults", which will reset to clear the problem. Now when the PC boots into windows, I can restart as normal (and from the OS on either HDD). I only know how to control the issue, and don't still know the root cause. I'd like to be able to use the OC genie function if anyone can suggest a why I'm seeing this problem. Could it be that I'm drawing too much power when using OC feature?

    Read the article

  • How to detect APC UPS battery usage and run a script when on battery

    - by Andy Arismendi
    I have a couple APC UPS - Smart-UPS RT 6000 RM XL Smart-UPS RT 5000 RM XL Unfortunately the power in my office likes to go out (out of my control) and hence the equipment powered by these UPS shuts down. They power a VMware infrastructure environment (VMware Lab Manager) and what I'd like to do is detect when one is on battery (say has been for x amount of time or has x percentage left) and run a script on this event. What software do I need to detect a on-battery event and have it run a script? Thanks!

    Read the article

  • Using Xbox 360 controller with Mac OS X (specifically turning it off)

    - by Bob King
    So I've been using this driver for a few months with the Xbox 360 Wireless Controller For Windows with my Mac Mini. Here's an article about the driver on Gizmodo. The driver works really well for actually using the controller, but there doesn't seem to be a way to power off the controller without pulling the batteries. Does anyone know of a replacement driver that includes power-off capabilities, or know of some other undocumented way to turn the controller off? Note: I've been having problems getting to the site, but it could be our corporate filtering.

    Read the article

  • OpenVPN bandwith restrictrictions and cpu power needed

    - by user197664
    In Open VPN is there a way to set a maximum limit of data and speed per user? Say user "reptar' is abusing the VPN and I wanted to limit his/her speeds and/or data how would one go about doing this? Would I need to know the IP address of the abuser? Also, I have seen articles around the internet about turing a Rasberry PI in to a VPN server. If I did such a thing how many users would this device be able to handle at a given time? I believe it runs at 512 gb and clocks at around 700 mhz.

    Read the article

  • HP dv6000 laptop powers on only if plugged in

    - by Ben
    My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

    Read the article

  • Mother Board Question

    - by user33931
    1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >