Search Results

Search found 14828 results on 594 pages for 'settings py'.

Page 33/594 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • Where is debian storing its network settings?

    - by user13743
    I have a debian machine that is supposed to have a static ip, but insists on getting its address from the DHCP server. Here's this settings file: $> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.99 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 Yet $> sudo /etc/init.d/networking restart Reconfiguring network interfaces...done. $> sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:e0:03:09:05:2e inet addr:192.168.1.205 Bcast:255.255.255.255 Mask:255.255.255.0 ... Where is it being told to use dhcp?

    Read the article

  • OS X 10.8.3 + attempt to change VPN settings = no more VPN access

    - by nicole
    I am running Mountain Lion and had gotten very tired of re-entering my password at random times when using my school's VPN network (I don't know much about these, but the type is Cisco IPSec according to the setup instructions I followed a while back). In an attempt to make life easier, I followed the instructions here, but, alas, any attempt to connect with VPN was met with the message "A configuration error has occurred. Verify your settings and try connecting again" (or something along those lines.) I then tried to do the steps in the blog post in reverse and change everything back. Upon (supposedly) doing that, though, a new error message came when attempting to connect to VPN: "The negotiation with the VPN server failed. Verify the server address and try reconnecting." Now I have no idea what to do. Is there a way to reset all VPN-related things in my system so that I can follow my school's instructions and just start over?

    Read the article

  • Notepad++ shortcuts not getting copied to the second computer where I want to replicate my settings

    - by Dragos Toader
    In Notepad++, there's a way to assign your custom shortcuts by going to Run - Modify Shortcut/Delete Command... This brings up the Shortcut Mapper I set up my custom shortcuts on Computer 1 I then installed Notepad++ with the same install settings and plugins on Computer 2 I then created a zip archive of my Notepad++ folder in Program Files on Computer 1 I overwrote the Notepad++ folder in Program Files on Computer 2 with this archive My custom shortcuts did not come across. I thought that the shortcuts were saved in C:\Program Files\Notepad++\shortcuts.xml I compared C:\Program Files\Notepad++\shortcuts.xml from Computer 1 with the same file on Computer 2 and the two files are identical. Why then are the shortcuts not coming across to Computer 2? Computer 1 is Windows XP Computer 2 is Windows Server 2008 R2

    Read the article

  • What router settings to use for wireless home network

    - by Question Overflow
    While looking at the setting of my wireless router, I am bewildered by the array of options available. Despite searching on Wikipedia to try to understand the various acronyms, I am still clueless to decide what is the best setting to use although the default works fine. Rather than calling the internet service provider (ISP) to ask them the correct settings, I hope to learn more about the differences between some of the options listed below, so that I would be able to make a more informed decision from now onwards: PPPoE vs PPPoA LLC vs VC-Mux Bridge vs Routed In addition, I would also like to know the significance of the following MTU VPI VCI And whether or when I should manually specify DNS?

    Read the article

  • Asus Rampage III and Corsair DRAM Settings

    - by Glorithm
    Recently I flashed the BIOS of my Asus Rampage III Extreme. But I lost the settings and now only 16GB out of 24GB of DRAM in the system is recognized. Does anyone has the correct DRAM setting for: 2 kits of cmz12gx3m3a1600c9 (Corsair Vengenance 12GB kit) on Asus Rampage III Extreme? Current I have 9-9-9-24 1N at 1.5v, but only 16GB is showing. I even tried to up the voltage to 1.65v, still no joy. Thank you in advance!

    Read the article

  • Separate brightness/power-saving settings for multiple monitors

    - by MariusMatutiae
    At home, I connect my laptop to an external monitor. Under Linux X server, it works perfectly. Occasionally I watch a movie on the external monitor. When I do, I would like to fold the laptop shut, and just relax. This however triggers my settings for dimming the screen after 10 minutes of inactivity, which in turn extends to the external monitor. I know I could solve the problem by setting dimming to "Never", but this is a waste, causes the laptop to overheat, and is bad for the normal laptop use. How can I set the power saving/brightness specs for the external monitor, independently of the onboard one? I run Debian or Arch, under KDE.

    Read the article

  • Change Block Tracking settings not retained for a VM on VMWare 5.5

    - by Chris
    I'm trying to enable Change Block Tracking as per this VMWare KB article but the setting ctkEnabled is not being retained in the advanced options or being added to the vmx file. The setting scsi0:0.ctkEnabled is being retained and I see a file vmname-ctk.vmdk in the datastore. I've verified that the vm doesn't have any snapshots but don't see any other suggestions in the KB (or google, of course.) Edit: The last comment on this community post. It's a slightly different circumstance, but suggests that there is an known bug editing these settings in the web-gui.

    Read the article

  • A dot between two numbers is converted to comma

    - by Isaac
    For example when i want to write 1.1 in MS Word, the . is suddenly converted to ',' when i write the second 1. Here is a illustration of what happens: Notes: I am typing in Arabic and i want the numbers Arabic. When I am typing in English it is fined and everything is better than expected: The . remains . I tried to reset Word settings based on the all the ways that MSDN suggests. Now all the styles and options are set to default and all add-ons are removed. I also tried to reset my Regional and Languages settings to a Standard one. I have also changed all the , separators to . How can i stop the Word from changing my dots to commas? (It only happens when dot is between two digits)

    Read the article

  • Logging on to server creates duplicate user profiles in Documents & Setting

    - by Tech
    Windows Server 2003. I am having a problem with the creation of new user profiles when logging in remotely to a terminal server. The new user profile gets added under Documents & Settings as username.domainname. Deleting the new profile does not allow the original profile to be reverted to. Went logging on to the server again, it creates another new user profile. Nothing was changed in the Active Directory or security settings. How do I get the original profile to be used?

    Read the article

  • Elan Smart Pad - empty settings window

    - by Quarien
    I am using my Asus UL30JT with Windows 8. I installed Elan Smart-pad driver 11.14.1.3. It basically works just fine, I have all the gestures and stuff. However, to adjust the settings I have to launch regedit.exe, because the window appears to be broken. Under Mouse - Elan Tab - Options I see this: Do you know how to fix that? Also, if you have a similar program, can you at least send me screens of what I can change? As I said, I am editing registry right now and I need some guidance what I can actually do :)

    Read the article

  • How To Adjust Properly Brightness And Contrast On Monitor

    - by Johannes
    This days, it seems that I either go worse with my eyes or some settings with contrast and brightness have been changed. However, I have been searching now for some tutorial on how to adjust contrast and brightness, and I have found already some, on how to use Microsoft Win7 Calibrate Display Color program, but some people don't recommend it.. My monitor control menu shows settings (which are by default) that contrast is set to 80, contrast to 90 and sharpnes to 45, for which I belive are pretty dam high. I'm usually every day in front of my PC about 6-10h. The biggest problem is, when the night comes, and I have to read some word document, after a 10-15m of reading, eyes starts hurting. I'm using ASUS VW198 and Nvidia 9800 GT graphic card. So please suggest me, what should I decrease, contrast or brightness or both?

    Read the article

  • How to migrate Notepad++ settings?

    - by NoCatharsis
    I am trying to portabilize every program I use if possible, and Notepad++ is on the list. The only problem is that I've had a native installation until now so that I'm not totally sure which settings files need to be moved to the portable directory. Surely there's a function tucked away somewhere in NPP exactly for this purpose, or some plugin out there? I mean the developers have literally thought of everything else, yet this is the one thing I cannot find specifically anywhere in the NPP wiki or otherwise, and I don't want to miss an important file. Here is the closest I've gotten: Notepad++'s configuration files and Where are all the files? Should I just copy every configuration file listed on the first link?

    Read the article

  • How do i restore default font settings in windows Vista

    - by user45556
    Hi guys, I am here with a problem to restore the font setting of my vista. I am using Windows Vista and due to unknown reasons my font settings have been changed to ugly font. I used to get clear fonts previously but all of sudden the fonts have become blur and font name has also changed. all windows programs showing default fonts have been changed. I dun know which is the true font of windows vista and from where to restore. I tried using color and apperance but it didn't worked... so what can be done?

    Read the article

  • How do i restore default font settings in windows Vista

    - by user45556
    Hi guys, I am here with a problem to restore the font setting of my vista. I am using Windows Vista and due to unknown reasons my font settings have been changed to ugly font. I used to get clear fonts previously but all of sudden the fonts have become blur and font name has also changed. all windows programs showing default fonts have been changed. I dun know which is the true font of windows vista and from where to restore. I tried using color and apperance but it didn't worked... so what can be done?

    Read the article

  • Migrating users and IIS settings from a workgroup win2k3 machine to a new win2k8r2

    - by amber
    I am retiring my old Windows Server 2003 Standard 32bit machine to a new machine with Windows Server 2008 R2 Standard. The two sticking points are migrating user accounts (and there are a lot of them) and IIS settings/websites (again, there are a lot). The new machine has not been provisioned yet. I'm at that point where I'm about install the OS on it. The old machibe is configured with a mirrored set for its OS and data partitions. I have broken the mirror set, replicated all of the data to an external drive, and then rebuilt the mirror set. In short, I have an image of the old machine to play with while safely leaving it up and running. Thanks!

    Read the article

  • Power outage, Server 2K3 remains on "applying computer settings"

    - by syuroff
    My reward for clicking the "test" button in the APC UPS software was that it completely cut the power to my SQL server. The server promptly rebooted, the SQL service is running (verified by the app on another server that queries it), but the GUI has remained on "applying computer settings" for 20 minutes and counting, and it forbids RDC connections. Since SQL is up, it is fulfilling its key role, but it's obviously not right. What step to take next? Wait longer? Hardware is a Dell Poweredge 2850, internal RAID10.

    Read the article

  • How to migrate Notepad++ settings?

    - by NoCatharsis
    I am trying to portabilize every program I use if possible, and Notepad++ is on the list. The only problem is that I've had a native installation until now so that I'm not totally sure which settings files need to be moved to the portable directory. Surely there's a function tucked away somewhere in NPP exactly for this purpose, or some plugin out there? I mean the developers have literally thought of everything else, yet this is the one thing I cannot find specifically anywhere in the NPP wiki or otherwise, and I don't want to miss an important file. Here is the closest I've gotten: Notepad++'s configuration files and Where are all the files? Should I just copy every configuration file listed on the first link?

    Read the article

  • Automate Win8 network and sharing settings

    - by RafaelBarriola
    I am trying to create a unattended DVD installation of Windows 8, but I can't seem to find a solution do this. What I'm looking for are to have the same settings on the Network and Sharing Center, to have the Turn on network discovery "on" for both the private and guest/public within the Control Panel. For private and guest/public, I need to: Turn on network discovery Turn on printer and file sharing Turn off public folder sharing Turn on password protected sharing Use user accounts and passwords to connect to other computers I've been searching for days and have not found a solution yet.

    Read the article

  • Specific apache + mysql settings for a light-weight site

    - by Good Person
    I have a small website with a Joomla and a Moodle set up. It seems that both of these are very slow. The server (CentOS release 5.5 (Final)) is a virtual dedicated server with about 2GB of ram. I don't expect to ever get more than 10-15 people on at the same time (and if that is high) What settings could I change in either apache, mysql, or even the OS to increase the performance of my site? I'm not concerned about running out of resources if I get too many visitors. If you need more specific data leave a comment and I'll edit the question.

    Read the article

  • php.ini settings change not taking effect for large file uploads

    - by user51347
    My server was just reprovisioned, and my application which uploads large (100M+) files now breaks upon re-installation. the symptom is quite consistent : smaller files (8mb in my tests) upload just fine. Larger files cut off at quite close to the same point every time given a particular computer. a file that fails at 26% will fail at just about the same every time. One that takes 1:40s to fail will take within 2 seconds of that every time, before failure. I have set my php.ini settings extravagently : post_max_size = 512M upload_max_filesize = 512M max_input_time = 3600 max_execution_time 3600 Is there possibly a setting at the Apache Level which would override PHP?

    Read the article

  • Settings what-opens-what once and for all (Backing up File Associations)

    - by ldigas
    Every time I switch machines (as in, get a new one, or reinstall an OS or something like that) my precious file associations get lost. And the next six months pass slowly until I again set them up right. Is there a program that allows me to: Set all the extensions I would like to open with let's say, Vim, without setting each one of them individually. Something of a kind: Vim opens: .... list of extensions ... and/or A program which lets me backup my current settings, and when I copy those to a new machine it lets me just modify the paths where I putted the applications in question, and it does the rest (again, associates that program with all the extensions it opened before).

    Read the article

  • Windows 7 explorer always crashes, opens small "Personalized Settings" window

    - by Ian Sellar
    My Windows 7 desktop PC, built by me, started acting very weird in the last couple of days. I use it quite often, about half of the time through TeamViewer. Explorer would crash and restart randomly, almost always through TeamViewer. This made me suspect that TeamViewer was the problem but I have reproduced it with and without TeamViewer several times. The only way I can seem to get the problem not to occur is by booting into Safe Mode. I have used CCleaner and Malwarebytes to make sure it wasn't a registry error or malware causing the problem, and I have tried the fix in the seemly related issue here as well every other fix I have found online including removing security updates KB980408 and KB2926765 as well as using "sfc /scannow" and a bunch of other things I can't remember. More recently when I try to start explorer it is popping up a small window that says "Personalized Settings" on the top, but is completely empty and crashes instantly. The only way I can get it to disappear is to kill the explorer.exe process. I wish I could take a screenshot but I can't seem to open paint or even find the exe. I have tried restarting it, I have tried starting it while the personalized settings window was open. I have come up with two lists of processes the first is the list of active processes when I boot into safe mode and explorer seems to work fine. The second is the list of processes that I can narrow it down to in normal boot and still replicate the problem. There is one process that I can't seem to close. NisSrv.exe which is describes as "Microsoft Network Realtime Inspection Service". When I try to close the process NisSrv.exe it says "The operation could not be completed. Access is denied." When I try to close the related service it gives the same message. Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 2,660 K smss.exe 304 Services 0 1,196 K csrss.exe 408 Services 0 4,156 K wininit.exe 444 Services 0 4,608 K csrss.exe 452 Console 1 8,700 K services.exe 492 Services 0 7,700 K winlogon.exe 524 Console 1 5,756 K lsass.exe 536 Services 0 10,644 K lsm.exe 544 Services 0 4,316 K svchost.exe 652 Services 0 8,976 K MsMpEng.exe 804 Services 0 40,696 K explorer.exe 1332 Console 1 85,220 K ctfmon.exe 1376 Console 1 3,680 K dllhost.exe 1624 Console 1 8,656 K chrome.exe 1408 Console 1 98,504 K WmiPrvSE.exe 2352 Services 0 6,472 K chrome.exe 1744 Console 1 65,116 K taskmgr.exe 372 Console 1 14,948 K cmd.exe 2776 Console 1 2,960 K conhost.exe 1816 Console 1 3,580 K tasklist.exe 2308 Console 1 5,868 K And the list of processes I have narrowed it down to. Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 2,808 K smss.exe 316 Services 0 1,216 K csrss.exe 484 Services 0 4,532 K wininit.exe 596 Services 0 4,604 K csrss.exe 604 Console 1 23,676 K services.exe 652 Services 0 11,344 K lsass.exe 668 Services 0 12,692 K lsm.exe 676 Services 0 4,464 K MsMpEng.exe 972 Services 0 68,436 K winlogon.exe 168 Console 1 7,784 K svchost.exe 496 Services 0 19,140 K NisSrv.exe 3176 Services 0 808 K svchost.exe 1684 Services 0 11,260 K taskmgr.exe 4524 Console 1 20,696 K cmd.exe 4764 Console 1 7,224 K conhost.exe 4772 Console 1 6,916 K sublime_text.exe 2340 Console 1 45,012 K dllhost.exe 4476 Console 1 8,736 K tasklist.exe 3796 Console 1 5,768 K WmiPrvSE.exe 1768 Services 0 6,344 K Here is the event data xml from event viewer for the error I am getting. <EventData> <Data>explorer.exe</Data> <Data>6.1.7601.17567</Data> <Data>4d672ee4</Data> <Data>vrfcore.dll</Data> <Data>6.3.9600.16384</Data> <Data>5215f8f5</Data> <Data>80000003</Data> <Data>0000000000003a00</Data> <Data>12e4</Data> <Data>01cfb84fa70f89dc</Data> <Data>C:\Windows\system32\explorer.exe</Data> <Data>C:\Windows\SYSTEM32\vrfcore.dll</Data> <Data>e5957093-2442-11e4-9f8a-94de806ed9cb</Data> </EventData> I was looking through the eventvwr log again and I found this, possibly related <EventData> <Data>runonce.exe</Data> <Data>6.1.7601.17514</Data> <Data>4ce7a253</Data> <Data>MSVCR100.dll</Data> <Data>10.0.40219.325</Data> <Data>4df2bcac</Data> <Data>c0000005</Data> <Data>000000000003c145</Data> <Data>670</Data> <Data>01cfb8dabbd85942</Data> <Data>C:\Windows\system32\runonce.exe</Data> <Data>C:\Windows\system32\MSVCR100.dll</Data> <Data>fa6f82b9-24cd-11e4-80a8-94de806ed9cb</Data> </EventData> And the general error details Faulting application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4 Faulting module name: vrfcore.dll, version: 6.3.9600.16384, time stamp: 0x5215f8f5 Exception code: 0x80000003 Fault offset: 0x0000000000003a00 Faulting process id: 0xc38 Faulting application start time: 0x01cfb84e5e852c5f Faulting application path: C:\Windows\Explorer.EXE Faulting module path: C:\Windows\SYSTEM32\vrfcore.dll Report Id: 9dc19e6d-2441-11e4-9f8a-94de806ed9cb Another probably unrelated error that I seem to be getting pretty often. Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. My explorer tab in Autoruns seen below along with the error when I try to uncheck something. I should add that I seem to be able to disable shell extensions with ShellExView but I still can't get explorer to start correctly. EXPLORER SHELL UPDATE - See screenshot below I can access the explorer right click menu through a file manager I downloaded called NexusFile, but still no luck starting explorer. Another round of errors that I am getting regarding Windows Search Service The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index. Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801) followed by The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt. Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801 and The plug-in in <Search.JetPropStore> cannot be initialized. Context: Windows Application, SystemIndex Catalog Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801) and The gatherer object cannot be initialized. Context: Windows Application, SystemIndex Catalog Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801) and The Windows Search Service cannot load the property store information. Context: Windows Application, SystemIndex Catalog Details: The content index database is corrupt. (HRESULT : 0xc0041800) (0xc0041800) WER Log http://pastebin.com/WXKGDT4Q I'll add information as I remember it or people request it.

    Read the article

  • SMTP Mail client settings in app.config file C#

    - by Caveatrob
    I've put mail settings in app.config and can successfully pull them into a mailSettingsSectionGroup object. However, I'm not sure how to send a message using these settings. This is what I have so far: System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None); MailSettingsSectionGroup mailSettings = config.GetSectionGroup("system.net/mailSettings") as System.Net.Configuration.MailSettingsSectionGroup; What do I need to do next to use the mailSettings object?

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >