Search Results

Search found 2017 results on 81 pages for 'stage'.

Page 33/81 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Windows 2008 R2 Server Core Disk Space Requirements/Recomendations

  - by Richard West

  I'm in the preparation stage to roll out a few Windows 2008 R2 Server Core in my VMware ESX environment. In looking over the documentation it looks like Server Core can operate in a little as 6.5 GB of hard drive space. Less disk space required. A Server Core installation requires only about 3.5 gigabytes (GB) of disk space to install and approximately 3 GB for operations after the installation. I am curious as to anyone’s real world experience and recommendations with regard to this requirement. Is it realistic? A little bit about our environment: Less than 25 users, and around 75 computers/servers in our current AD system. These systems will be responsible for normal AD operations and print servers for 5 printers - nothing to big here.

  Read the article

• Server Performance

  - by Burt

  We have a dedicated server that we use to stage websites (our test server). The performance of the server has become really bad and we regularly have to restart it. When performance is poor I have checked task manager for the processes and memory but everything looks OK. We use a content management system and it is always when using the admin section of this CMS that we notice the performance degrade which makes me think it may have something to do with DB calls the CMS is making. Does this sound viable? Any other sggestions of how I can go about testing this? Thanks in advance...

  Read the article

• DHCP: server behavior in a two server situation

  - by lang2

  This is a question w.r.t server behavior in the DHCP standard. I've read the RFC and it's still not clear to me. Situation is this: There are two DHCP servers on a network. My client initially get IP address from server A. At some stage, server A goes down. My poor client is sending REQUEST in RENEW and then REBIND state, with no response whatsoever. My questions is: in this situation, should server B response to the REQUEST in REBIND state, e.g. DHCPNAK? Thanks, lang2

  Read the article

• Installing Midnight Commander from sources (no root privileges)

  - by ouroboros

  I tried to configure ./configure --prefix=/localfolder glib-2.26.1/ make make install but it fails at make stage. trying to configure mc-4.6.1/ and make doesn't obviously work. What are the steps I need to make in order to install midnight comander for my local user in a custom folder? Make for glib gives me these errors /usr/bin/msgfmt: found 2 fatal errors cp: cannot stat `test.mo': No such file or directory gmake[4]: *** [test.mo] Error 1 gmake[4]: Leaving directory `/remote/folder/mc/glib-2.26.1/gio/tests' gmake[3]: *** [all-recursive] Error 1 gmake[3]: Leaving directory `/remote/folder/mc/glib-2.26.1/gio' gmake[2]: *** [all] Error 2 gmake[2]: Leaving directory `/remote/folder/mc/glib-2.26.1/gio' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/remote/folder/mc/glib-2.26.1' gmake: *** [all] Error 2

  Read the article

• Gigabyte Motherboard + Adaptec RAID = No Booting from any drives

  - by Farseeker

  I have a brand new PC, just out of the box. It has a Gigabyte GA-P55-USB3 motherboard. I also have an Adaptec ASR-2504 SAS RAID card with 2x 15k Seagate Barracuda SAS drives attached. After the motherboard init's its on-board RAID it then init's the Adaptec RAID. It detects all the RAID devices OK, but when it gets to Loading Operating System... (i.e. right before it should load the OS) it just sits there forever, doing nothing: If I force it to boot from the optical drive, you see it spin up for a few seconds then die down again. If I remove the Adaptec RAID card, everything works perfectly. As soon as it's plugged back in, it never gets past that stage. The RAID card should be perfectly fine (it was before), but I have raised a case with Adaptec anyway. Any suggestions on what I can try to get these two to play nicely together?

  Read the article

• Understanding an Application based on the OS interaction with a Hypervisor

  - by Dewy

  Following I will ask a few specific questions but I will set the stage first. My goal is to monitor Applications in a very odd place - between the OS and a Hypervisor. If you have comments about this probably unachievable goal please do educate me. One good advice or link can save me days of work. Now to my current attempt. I installed on WinXP a VirtualBox (being open-source) and got a guest OS of latest Ubuntu running within. Where should I go next? Can I set the logs to show all memory/CPU/disk instructions of the guest OS? Thanks, Dewy

  Read the article

• trying to install lync 2010 and experiecing an error with central management store

  - by Itai Ganot

  I'm trying to install Lync 2010 and i'm getting stuck in the stage where i have to install or point to the local configuration store. I've tried finding it in the domain and without luck, any recommendations? PS C:\Users\Administrator.ASUTA> Get-csconfigurationstorelocation WARNING: No Configuration Store location has been set. PS C:\Users\Administrator.ASUTA> Get-CsComputer "$env:computername.$env:userdnsd omain" Get-CsComputer : Cannot find location of Central Management Store in Active Dir ectory. At line:1 char:15 + Get-CsComputer <<<< "$env:computername.$env:userdnsdomain" + CategoryInfo : ResourceUnavailable: (:) [Get-CsComputer], Manag ementStoreNotFoundException + FullyQualifiedErrorId : ManagementStoreNotFound,Microsoft.Rtc.Management .Xds.GetComputerCmdlet PS C:\Users\Administrator.ASUTA>

  Read the article

• Input devices stopped working during system upgrade

  - by amorfis

  Hi, I was upgrading Ubuntu on my server (but Ubuntu is in desktop version) when mouse and keyboard stopped working :( So the screen went black (screensaver), and now I can't do anything. I don't know what stage of upgrade it stopped working, probably now it waits for me to answer some question. Keyboard and mouse were connected by KVM, connecting them directly doesn't help. Both are on USB. What I can do, is connecting to the machine by ssh. Can I somehow see and answer questions of update system and somehow finalize process of upgrade?

  Read the article

• Is it possible to mount a TrueCrypt volume to a NTFS mount point?

  - by Anthony

  The question is simple really. Under Linux etc.. you can mount TrueCrypt volumes, files or partitions, to any mount point of your choosing whereas in Windows the interface only shows drive letters. I'm wondering if I can mount the volume, a partition in this case, un-encrypted to a NTFS mount point, or folder, instead of using drive letters. The reason I ask is I am running out of letters :(. I'm using Server 2008 with the latest TrueCrypt install. Note: I know how to mount a volume directly to an NTFS folder mount point but doing so, and navigating to the mount point, prompts a notice saying the volume is not formatted - to be expected as the volume is not un-encrypted at this stage.

  Read the article

• Update failure: failed md5sum validation: sys.vgz

  - by NederWeb

  LS, I have ESXi 4, with all the 2009 updates installed. When i try to update the last firmware update, i receive the following error: Copy of /bootbank/sys.vgz to /tmp/stage/firmware/bank/sys.vgz failed md5sum validation (8:02:31:29.332 cpu1:1787979) warning 20-Jan-10 9:42:02 PM I updated the vmware-tools separatedly, which succeeded. I receive this message if i use the update GUI, but also when using the CLI tool. I haven't got a clue how to solve this, anyone any ideas? Or having similar problems?

  Read the article

• Wireless connection switches off IP address

  - by Sanjay Gupta

  I have a Lenovo laptop with windows XP and a wireless connection at home. The wireless connection works when initially I switch on the computer. but if I leave it for even 5 minutes, the wireless is gone. Then I have to shut it off and start computer all over again, waiting for 5 minutes. Even if the wireless speed is 48Mbps or better, it gives the message "Renewing IP address" and gets stuck there not moving to the next stage. Other laptop in the household works fine and can be left on. Why does this happen ? I suspect that IP address is the problem and somehow is not registered in all the necessary files.

  Read the article

• Hosting discussion forums on Windows 2008 Server / IIS, what software to use?

  - by Lasse V. Karlsen

  A plan to look into hosting discussion forums related to our product, on our own servers, has arisen, and I can't seem to find any pure .NET or Windows-based discussion forums. Since we're a pure Windows-based company, installing something that requires MySQL or Linux is going to require administration knowledge we don't currently have. What are our options? Every site I find that shows how to set up discussion forums on IIS involves just taking one of the many LAMP-based ones and tweaking IIS to run PHP or similar to run it. Isn't there a .NET-based discussion forum software? Free or not doesn't matter at this stage, right now we're just looking for options.

  Read the article

• data replication from a production web server back to the staging web server

  - by Dennis Smith

  Have two web servers, development/staging and production. Code and some documentation is moved from the staging area to production either through on-demand jobs or nightly via a global replication job. The production server of course sits isolated in a DMZ. There is some content that gets uploaded to the live server that needs to be replicated back to staging. Our security team is locking the network down (and they should) and restricting access to the live server. Best suggestions for replication of "live" data back to "stage" and backing up the live server also.

  Read the article

• Checking for orphaned snapshots - ESXi5

  - by Tim Alexander

  So we had some issues with our passive mail node over the weekend doing vmtools updates and to resolve a problem we had to revert to a snapshot and then reseed all the databases across. All in all everything seemed fine, the server works and CCR copy status is running fine. I used the "Delete All" option this morning to remove the snapshot and the process according to vCenter has completed with no errors and no "Needs Consolidation" flag. This all seems fine until I check the Datastore that holds the VM on our SAN and I can clearly see snapshots that are pretty big [see attached image]. These do not seem to be changing size and the data modified is around the time the works were started for the vmtools update. Does this possibly mean that at some stage, possibly during reversion or hard resetting of the VM, that they have become orphaned? Are there any methods to check orphaned status of snapshots? We are running ESXi5.0 Update 1 with storage provide by an EMC SAN. Enterprise plus is the license level.

  Read the article

• Can I use wildcards is puppet package ensure to cover multiple releaseversion

  - by Rob van den Eijnde

  Using puppet I want to update packages on my (CentOS 5 & 6 servers) in a controlled way. Therefore I don't want to use ensure=>latest but rather ensure=>3.0.1-1. Example: class puppet::installation inherits puppet { package { "puppet": ensure => "3.0.1-1", } } The update works alright but puppet agent keeps complaining that there is a difference: /Stage[main]/Puppet::Installation/Package[puppet]/ensure: current_value 3.0.1-1.el6, should be 3.0.1-1 (noop) I can solve this by changing the ensure rule to 3.0.1-1.el6 but than that won't work on CentOS 5. Is there a short/clean way to solve this or do I have to write to seperate, os-releaseversion dependant rules. I have been googling for a solution but didn't find anything pertaining to this particular question. Any suggestion or reference to a relevant example would be appreciated.

  Read the article

• Installing W2K8 R2 on a Dell Poweredge 2850

  - by DerekT

  I'm a server novice and have been given a Dell 2850 (PERC 4e/Di). It has 3 blank HDs that I think are configured as RAID 5. I am trying to install W2K8 R2 SP1 on it. It doesn't have a DVD reader so I created an install USB. This works fine until it's time to copy files to the HD. It can't see a HD. There is an option to browse for drivers at this stage. Any idea what drivers I need and where to download them? I downloaded this driver RAID_DRVR_WIN_R227150.EXE but this failed with invalid signature. Thanks to dyasny for the link to LSI-LOGIC_MULTI-DEVICE_A00_R227150.exe.

  Read the article

• Broadcom bluetooth driver for Windows 7 on MacBook Pro

  - by Sergiy Byelozyorov

  I have installed Windows 7 on MacBook Pro using BootCamp. Usually when turning my Bluetooth headset on and trying to pair it with Mac for the first time, Windows would fail to install drivers and open solution in Action Center, which suggests to download the driver from the Broadcom webpage. This worked before and drivers would install and work. However now, when I start driver installer, it would get stuck at "Detecting Bluetooth Device" stage. Below the steps there is also a warning with text, which says "Please plug in or turn ob your Bluetooth device". This is how the installer looks like when it's stuck: I have tried turning my headset on/off, bringing it into pairing mode, installing/uninstalling device to/from the Bluetooth Devices. None of these worked. Any ideas?

  Read the article

• Hypertransport sync flood error

  - by Carl B

  What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

  Read the article

• Test/Dummy SMTP server for Windows

  - by geoaxis

  I would like to install a Test/Dummy SMTP server on a Windows 2008 server (virtual box). I just want to test my web application on the machine it self so I don't need the mails to go out on the internet, but just to be written to disk (so that I can verify that the mail function was indeed called and the correct data was handed over to SMTP) Can you recommend some tool. I guess starting your own SMTP server in python is an option. I am looking for a simple (ready to use) solution, targeted for tests systems. I will need to integrate it to automated tests (Selenium) at a later stage. Thanks

  Read the article

• Seeking free project planner with auto resource levelling

  - by mawg

  As the title says, I am seeking a project planner with automatic resource levelling. It must be free for commercial use and a bonus, but not requirement, would be MS project import/export. I like the look of Task Juggler, but it is at a stage of development hovering between v2 and v3. Anything else? Basically, I want to play "what if games" - I will determine the tasks and their effort, and the dependencies between them and then try to figure out how many staff I need. Since many of the tasks can be done in parallel, it is difficult to guess how many are needed. A PM tool with automatic resource levelling seems like a good way to find out.

  Read the article

• Laptop abruptly powers off after few seconds of booting

  - by Alan Mendelevich

  I have a 3 year old HP Pavilion dv2208 laptop. Recently it started abruptly powering off in like ~20-30 seconds into Windows boot sequence after almost every reboot/shutdown. Even if I leave it in Repair/Start Windows Normally stage it powers off anyway. The only way I managed to workaround this is to enter BIOS setup screen and leave it on for no less than 10 minutes. I don't know what happens there but this helps every time. Any ideas of possible ways to fix this that don't include replacing motherboard are highly appreciated. P.S.: I've tried resetting BIOS to defaults, updating to the latest BIOS version, etc. Happens with both Vista and Windows 7.

  Read the article

• Make puppet agent restart itself

  - by SamKrieg

  I've got a file that notifies the puppet agent. In the network module, the proxy settings are included in the .gemrc file like this: file { "/root/.gemrc": content => "http_proxy: $http_proxy\n", notify => Service['puppet'], } The problem is that puppet stops and does not restart. Aug 31 12:05:13 snch7log01 puppet-agent[1117]: (/Stage[main]/Network/File[/root/.gemrc]/content) content changed '{md5}2b00042f7481c7b056c4b410d28f33cf' to '{md5}60b725f10c9c85c70d97880dfe8191b3' Aug 31 12:05:13 snch7log01 puppet-agent[1117]: Caught TERM; calling stop I assume the code does something like /etc/init.d/puppet stop && /etc/init.d/puppet start Since puppet is not running, it cannot start itself... it kind of makes sense. How to make puppet restart itself when this file changes? Note that this file may not exist as well.

  Read the article

• ubuntu12.04 hangs at checking battery state

  - by crystalbass17

  My 12.04 system hangs at "Checking battery state". At this stage, no commands work eg: ctrl+alt+f1, alt+f5. I ran recovery mode, I ran the command sudo mount -o remount, rw sudo dpkg-reconfigure gdm and gdm was the only one installed so I didn't get a GUI screen. I have an integrated graphics card "Intel Corporation Mobile 4 chipset Integrated Graphics Controller (rev 07)". So I cannot install nvidia drivers as everyone else suggests. I have gone through several similar questions but everyone suggests reconfiguring gdm or reinstalling graphic drivers. I did sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get upgrade to get the latest x-swat drivers. The system still hung at the same line. The other option is to reinstall ubuntu, which is out of the question, since we have a very specific install for our project where the settings are very hard to duplicate. Suggestions/Comments welcome.

  Read the article

• Specifying a source in puppet doesn't seem to work

  - by Mr Wilde

  I have been attempting to create a manifest for installing postgres 9.1 using puppet on a Centos 5 server. I have been trying to adapt the instructions at http://wiki.postgresql.org/wiki/YUM_Installation in order to achieve this and when I go through a manual process, I have been able to. It would seem to me therefore that a puppet manifest containing package { 'postgresql91-server': ensure => installed, source => 'http://yum.postgresql.org/9.1/redhat/rhel-5-x86_64/pgdg-centos91-9.1-4.noarch.rpm' } however on attempting to apply this manifest I get err: /Stage[main]//Package[postgresql91-server]/ensure: change from absent to present failed: Could not find package postgresql91-server Any expert puppeteers out there able to help me?

  Read the article

• Practical tips when transitioning to xmonad?

  - by meder

  I like the idea and concept of xmonad, however I still keep going back to gnome after an hour or so. This feels like when I first tried to learn vim, but I've gotten past the learning curve point and can't live without vim nowadays. I'm sure the time will come for xmonad too, but I was wondering if current xmonad users can provide transitional tips? FYI, I'm on dual monitors ( 19 inch and 17 inch ). Example of an issue I'm having while in this "transitional" stage: How do you manage keeping the browser and other programs that are most commonly used in full screen mode, since by default I think it opens up in a small tile that takes up a portion of the screen? Do you just shortcut it to make it open full screen, or do you actually not maximize it? Or are there advanced methods through preferences in the conf file, making certain programs take up X space?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >