Search Results

Search found 18845 results on 754 pages for 'the machine charmer'.

Page 33/754 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Tunneling a public IP to a remote machine

  - by Jim Paris

  I have a Linux server A with a block of 5 public IP addresses, 8.8.8.122/29. Currently, 8.8.8.122 is assigned to eth0, and 8.8.8.123 is assigned to eth0:1. I have another Linux machine B in a remote location, behind NAT. I would like to set up an tunnel between the two so that B can use the IP address 8.8.8.123 as its primary IP address. OpenVPN is probably the answer, but I can't quite figure out how to set things up (topology subnet or topology p2p might be appropriate. Or should I be using Ethernet bridging?). Security and encryption is not a big concern at this point, so GRE would be fine too -- machine B will be coming from a known IP address and can be authenticated based on that. How can I do this? Can anyone suggest an OpenVPN config, or some other approach, that could work in this situation? Ideally, it would also be able to handle multiple clients (e.g. share all four of spare IPs with other machines), without letting those clients use IPs to which they are not entitled.

  Read the article

• OS X can connect to Windows machine, but can't access shared folders

  - by Bonnie

  I can create new folders on my Windows XP machine, set them to "shared". On my Mac, I pick Finder → Go → Connect to Server → smb://192.168.1.4 → Connect → Name / Password. It even shows me all the names of the newly created shared-folders on my PC, but when I try to actually connect to any of them I get connection failed, there was an error connecting Any idea on what would cause that? The fact that it successfully gets so far—to actually showing me my PC share-names—must mean I have 99% of this working correctly, i.e. the physical connection, the IP address, the user name, the password, etc. Still, I can't seem to access the folders themselves. I've tried this with my Windows XP firewall on/off, and Norton AntiVirus on/off. Same problem. Everything did work fine, 4 months ago. Were there any odd OS X or Windows updates released recently? I always apply them all. smbclient on the Mac does correctly find the XP machine, my XP user name, and accepts my XP password. I get the following from that smbclient command: Doing spnego session setup (blob length=16) server didn't supply a full spnego negprot Got challenge flags: ... Got NTLMSSP flags: ... Got NTLMSP flags: ... Domain=[XPMACHINE] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] tree connect failed: NT_STATUS_INSUFF_SERVER_RESOURCES I'm not sure why a standard XP box can't "supply a full spnego negprot". Whatever that means. Using XP's RegEdit to change my IRPStackSize from 11... to 13, 15, 20, 22... still gives that "NT_STATUS_INSUFF_SERVER_RESOURCES" error on the Mac.

  Read the article

• Virtual Machine Network Services causes networking problems in Vista Enterprise 64 bit install

  - by Bill

  I have a Quad-core/8GB Vista Enterprise 64-bit (SP2) installation on which I installed Virtual PC 2007. I have a problem that is opposite of all that I found searching around the Internet--everybody has problems making network connections from their guest VM. When Virtual Machine Network Services is enabled in the protocol stack for my network card across a reboot, it causes access problems to the network. The amount of time to login in using a domain credentialed account is upwards of 3 minutes, then after reaching the desktop the network and sharing center shows that my connection to the domain is unauthenticated. Disabling and re-enabling the Virtual Machine Network Services (uncheck in network properties/apply/recheck/apply) fixes the problem. And as long as I have the VMNS disabled when I shutdown the restart runs smoothly. I just have to remember to enable after login and disable before shutdown. I have un-installed and re-installed Virtual PC 2007 multiple times with restarts between. The install consists of the SP1 + a KB patch for guest resolution fix. Any help would be greatly appreciated. Some additional information... At one point during my hairpulling and teethgnashing with this, I tried to ping my primary DC and observed some weird responses: (Our DC is 10.10.10.25, my dynamic IP was 10.10.10.203) Reply from 10.10.10.203, Destination host unreachable. Request timed out. Reply from 10.10.10.25: ... This is not consistently repeatable, but thought it might strike a chord with someone.

  Read the article

• Process PHP files from a network share in a vmware virtual machine

  - by nhinkle

  As a testing environment, I have set up a vmware virtual machine running Windows Server 2008 R2. I have Apache and PHP installed (as part of the xampp package). I am doing the development outside of the VM, and so want Apache to serve PHP files from a VM shared folder (which appears as a network share in the VM). I have done this by creating an NTFS symbolic link in Apache's htdocs directory. I can access this directory from the browser, and plain-text files are readable. However, PHP fails to process files, instead returning the following error: Warning: Unknown: failed to open stream: No such file or directory in Unknown on line 0 Fatal error: Unknown: Failed opening required 'C:/xampplite/htdocs/path/to/file.php' (include_path='.;C:\xampplite\php\PEAR') in Unknown on line 0 It appears to be a permissions issue — PHP doesn't seem to be allowed to read the file to process it. However, Apache has no problem opening files in the directory. I cannot figure out how to give PHP the necessary permissions to process the file. Does anybody know of a way to make this work, or else another solution for getting the files into the VM automatically while I develop on the host machine?

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Can I boot up a virtual machine natively?

  - by Anshul

  My question is: Is is possible to run a virtual machine natively on your hardware if you have installed the proper drivers etc? In other words, can I use a VHD as a regular hard drive to boot from? The reason I want to do this is that I do both graphics-intensive and audio-intensive work, but my computer is not powerful enough to handle both at the same time and many times I install a bunch of audio programs that I don't want affecting the stability of my graphics programs. Basically I wanted to have sandboxing between the two sets of applications. So I tried running the graphics-intensive programs in a VirtualBox VM and the audio-intensive work natively (simply because it's a pain to route ASIO audio devices in/out of VirtualBox). This kind-of works - the graphics-intensive stuff is tolerable, but still relatively slow, because it's running inside a VM. So my next idea was to just dual-boot and install the graphics and audio programs in separate partitions but I frequently use them in tandem, so it wouldn't be practical to reboot my machine every time I need to use the other set of programs. But I could live with this scenario: If I need to do more audio-intensive stuff, I'll just boot up to the audio partition and run the graphics programs in a VM, and then when I'm working heavily on the graphics part, I'll just boot the graphics partition as a regular OS directly on the hardware. Is this possible? For example by booting up a VHD as a regular hard drive? Or by setting up dual-boot, and every time the audio partition is shut down, synchronize the graphics VM VHD with the native graphics partition? Is it practical, given the above scenario? And if it's not possible, barring buying another computer, can anyone suggest a best-of-all-worlds setup (the two worlds being performance, sandboxing, and running in parallel) for the above scenario? Thanks in advance.

  Read the article

• Deploying multiple identical copies of a virtual machine for compute tasks

  - by Reid

  I have a compute task which has a large number of library dependencies. I would like to deploy it on some of my company's large Linux clusters, where I do not have root. I could probably track down, compile, and install the right versions of all the libraries, but this looks to be quite tedious and would have to be repeated if I deployed it again somewhere else. On the other hand, it's pretty easy to install on current Ubuntu. This led me to wonder about a virtual machine approach. Could I put together a virtual machine which booted up, ran the computation (with parameters from and results to the host), and then shut down? In other words, I'd like a command like this that I could run on the host: $ ./run-vm --ram N --task /path/on/host/foo.sh --results /another/host/dir/ This would boot the VM, run foo.sh, and put the (relatively small) results of the computation in /another/host/dir/. It's important to start up many instances of the VM simultaneously, both on a single node and multiple nodes of the cluster. So it would be nice if I didn't have to make many copies of the VM virtual disk and metadata. As the task instances are completely independent, the VMs would not need any network support once deployed, or any outside communications beyond reading and writing the host filesystem. Is this possible, and if so, how might I go about doing it? Are there assumptions I've made above which are bogus?

  Read the article

• KVM virtual machine unable to access internet

  - by peachykeen

  I have KVM set up to run a virtual machine (Windows Home Server 2011 acting as a build agent) on a dedicated server (CentOS 6.3). Recently, I ran updates on the host, and the virtual machine is now unable to connect to the internet. The virtual network is running through NAT, the host has an interface (eth0:0) set up with a static IP (virt-manager shows the network and its IP correctly), and all connections to that IP should be sent to the guest. The host and guest can ping one another, but the guest cannot ping anything above the host, nor can I ping the guest from anywhere else (I can ping the host). Results from the guest to another server under my control and from an external system to the guest both return "Destination port unreachable". Running tcpdump on the host and destination shows the host replying to the ping, but the destination never sees it (it doesn't even look like the host is bothering to send it on at all, which leads me to suspect iptables). The ping output matches that, listing replies from 192.168.100.1. The guest can resolve DNS, however, which I find rather odd. The guest's network settings (connection TCP/IPv4 properties) are set up with a static local IP (192.168.100.128), mask of 255.255.255.0, and gateway and DNS at 192.168.100.1. When originally setting up the vm/net, I had set up some iptables rules to enable bridging, but after my hosting company complained about the bridge, I set up a new virtual net using NAT and believe I removed all the rules. The VM's network was working perfectly fine for the last few months, until yesterday. I haven't heard anything from the hosting company, didn't change anything on the guest, so as far as I know, nothing else has changed (unfortunately the list of packages updated has since fallen off scrollback and I didn't note it down).

  Read the article

• Windows Server 2003 (w/Exchange) move to new machine

  - by James Booker

  I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

  Read the article

• Intranet machines refuse to talk anymore

  - by ashes999

  I have two machines on the local intranet. They used to be able to talk to each other (ping, share files, etc.). Both are not successfully connected to the internet. The problem machine (lets call it test machine) can't talk to my main machine. The test machine can ping other machines on the intranet (at least one of my coworkers), but not mine. Odd. When I try to ping it from my machine, by machine name, I get Destination host unreachable. Both machines are on the intranet, with the network configured as Work Both machines have Windows Firewall disabled temporarily Both machines can talk to the internet (Google, SO, etc.) Neither machine can ping the other I need help resolving this. What I really want to achieve, is to remote into the test machine from my main machine, like I used to be able to do a few weeks ago. Some notes: Tried arp -a on both machines. I don't see the other machine's IP listed. Both machines have stable IPs; neither seems to have an IP conflict The configuration under ipconfig /all on my main machine mathces my coworker's machine. The test machine can ping his machine, but not my machine. The target machine times out trying to ping the main machine; the main machine gives me Destination host unreachable. I have rebooted both machines (several times) to no avail I have /release and /renewed both machines several times

  Read the article

• Passive mode FTP file download hangs from specific machine

  - by chiptuned

  I have a server which is an AWS instance that just cannot download files from a specific FTP server. I can connect to the FTP server fine and run some commands, but when I request a file it just hangs. Here is the debug output of the base linux ftp client after login: ---> SYST 215 UNIX Type: Apache FtpServer Remote system type is UNIX. ftp> get outgoing/catalog.gz catalog.gz local: catalog.gz remote: outgoing/catalog.gz ---> PASV 227 Entering Passive Mode (64,156,167,125,135,191) ---> RETR outgoing/catalog.gz 150 File status okay; about to open data connection. Thats it. Then it just sits there and nothing transfers. I have verified that a data connection is made but the client gets no data. ? ss -nt dst 64.156.167.125 State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 0 10.185.147.150:41190 64.156.167.125:21 ESTAB 0 0 10.185.147.150:48871 64.156.167.125:48557 The FTP server is not in my control and downloads from other FTP servers in passive mode have worked. Active mode does not work as the system is behind a firewall. Every FTP client I've tried has the same problem. The download works from other systems, even from other AWS instances I have with the same Security Group. Not necessarily the same distro or config though. I understand it may be some issue on the server side, but I want to know what it is about my particular machine where the transfer hangs and where on every other machine I can get my hands on, it works. Please let me know what the culprit on the client side could be or ideas on what else to look at.

  Read the article

• How do I tunnel an HTTPS proxy through a virtual machine (VMWare)

  - by Kyle

  I have a personal setup at home using VMWare Workstation. I also have a set of Virtual Private Machines that run Squid, and therefore provide me HTTPS proxy tunnels. Using Proxifier, I can tunnel all traffic for given applications through these tunnels. However, I also have a few virtual machines for dev/staging/experimentation/etc. I generally just use NAT to provide Internet access to the machines, and if I need to use these proxies, I can just setup Proxifier (or a Linux equivalent) to pipe the traffic through them. No problem. But... I got to thinking: Wouldn't it be great if I could assign these proxy tunnels to a virtual machine, so that when I start up the VM, it has instant-on access through the tunnel and not my local connection? (EDIT: Of course, it would USE my local connection, but it would tunnel traffic through the proxy.) To be more clear: I want a solution that binds the proxy to a VM, so that when I start the VM, I don't have to use a proxy client to connect to the tunnel - I am already piping all traffic from that VM through that proxy. I did a bit of searching, and the closest thing I could find was this: How to route public static IP to a virtual machine on a vmware ESXi host? Which wasn't all that applicable. The proxies are protected by user/pass but do not filter by IP. Again, they are HTTPS proxies setup through Squid. Any ideas on how to make this happen? Thanks a ton.

  Read the article

• Daemon program that uses select() inside infinite loop uses significantly more CPU when ported from

  - by Jake

  I have a daemon app written in C and is currently running with no known issues on a Solaris 10 machine. I am in the process of porting it over to Linux. I have had to make minimal changes. During testing it passes all test cases. There are no issues with its functionality. However, when I view its CPU usage when 'idle' on my Solaris machine it is using around .03% CPU. On the Virtual Machine running Red Hat Enterprise Linux 4.8 that same process uses all available CPU (usually somewhere in the 90%+ range). My first thought was that something must be wrong with the event loop. The event loop is an infinite loop ( while(1) ) with a call to select(). The timeval is setup so that timeval.tv_sec = 0 and timeval.tv_usec = 1000. This seems reasonable enough for what the process is doing. As a test I bumped the timeval.tv_sec to 1. Even after doing that I saw the same issue. Is there something I am missing about how select works on Linux vs. Unix? Or does it work differently with and OS running on a Virtual Machine? Or maybe there is something else I am missing entirely? One more thing I am sure sure which version of vmware server is being used. It was just updated about a month ago though. Thanks.

  Read the article

• How to connect to other Ubuntu machine as X Server?

  - by Tibo

  When I want to work on my local Linux machines from windows, I use Putty+Xming and I set the Xming port in Putty connection settings. This way I have a terminal on the machine and if, for example, I run the command 'firefox' a firefox window is opened in Windows (while it is really running on the Linux machine). I want to do the same thing from other Linux machine (they are both Ubuntu machine) connect by SSH and become this connection X Server so any graphic component will be opened on local machine. How can I do that?

  Read the article

• Ubuntu 11.04 VM shows a black screen in VMware Player

  - by Roel Veldhuizen

  I have a Ubuntu Server 11.04 64 bit VM running on VMware Player 3.1.4 that only shows a black screen. No matter what I try, the screen remains black. The VM has worked the first time. When I reset the machine, it shows the VMware loader and a flickering _ for about a second. Then the screen turns black again. VM settings: Memory: 512MB Processors: 1 HD: 20GB CD: auto detect Floppy: auto detect Network adapter: NAT USB controller: present soundcard: auto detect printer: present display: auto detect I just created a fresh VM and the same happens, so it seems that the problem is consistent.

  Read the article

• Getting a VMnet0 error in VMWare workstation after updating host computer from Windows 8 to 8.1

  - by Andrew

  Yesterday, I updated my computer from Windows 8 to 8.1. I have VMWare Workstation 10 running Windows XP on this computer and prior to the update I had no issues connecting to my network. However, since updating, I haven't been able to connect to any network and I'm getting the following error: "The network bridge on device VMnet0 is not running. The firtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet0" I've checked all of my settings which currently have my network adapter set for a bridged connection and under device status "connected" is checked. Not really sure where to go from here, but after doing some research I have seen that others users have reported getting this error when updating the OS (any OS, not windows 8 specifically) of the host computer. Thanks in advance to anyone who can help.

  Read the article

• VM can’t connect to outside in bridged mode

  - by Kamal

  Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have. My virtual network editor shows that my ethernet adapter(the one my host uses) is used for bridging. It is connected. I don't understand how I can get an IP address from DHCP server. I can't ping any of the DNS servers in generated /etc/resolv.conf which are the same as that of my host

  Read the article

• Forwarding port to a VM - How to?

  - by Peter Gadd

  I use Win 8 Ent x64 on my PC, and I also have a Win 7 VMware virtual machine set up using a bridged network adapter. The IPv4 number for the Win 7 VM is 192.168.1.115. I require access to the VM from the Internet through port 1688. How do I set up port forwarding to achieve this? My router is a Cisco Linksys WAG120N. ========= If you require any further information to help me with this, I will gladly supply it. ========= Thanks in advance.

  Read the article

• CentOS running inside VMware as WebServer times out on outside connection

  - by Tom Hart

  I have a CentOS machine running inside VMware, and I have got PHP and Apache set up on it, so if I open a browser (on the VM) and go to either localhost, or 192.168.0.3, I get a phpinfo page I made in /var/www/html/index.php, but, if on the host (Windows 7), in my browser I go to 192.168.0.3, it times out. I can ping the IP address from Windows and get a response, I just can't through the browser. Does anyone have any ideas what I need to do to get this working? This is my first time using a VM and I'm getting lost in the network settings.

  Read the article

• Xen and HyperVM build question on os template

  - by Levi De Haan

  I recently built a server with hypervm and xen, now i know xen from command line, but hypervm ties into our whmcs and so its a requirement, however my question is this, when i build a new o/s template my partition table is gone, and i know why, but i was wondering if anyone has built anything in hypervm for adding in partition tables, so i dont have to reinvent the wheel :). i can do it command line in the created vm with fdisk, and i have tracked down the creation scripts for hypervm but i am unsure if these insert directly into the machine as it looks like a lot of the things it does are externalized and are for xen to assign things like ip address etc.. oh and on an aside when i go in to modify the .cnf file to change the boot disk from cdrom to drive on windows when i boot using hypervm it overwrites my setting again..frustrating as heck, i've been trying to track down where in the code it does this, has anyone else had this problem and if so how did you fix it if you did?

  Read the article

• How to recover Virtual Machines in Virtualbox?

  - by Bruce Connor

  For some reason, all of a sudden, all virtual machines are gone from the User Interface in virtual box. I suspect CCleaner has something to do with it, but that's not the point. Both the virtual hardisks and the .xml files for the machines are still in their respective folders. How can I use them to get my virtual machines back into virtualbox? I tried simply creating a new machine from the old virtual hardisks, and it worked with the ubuntu guest, but not with the windows one. Plus, it'd be nice to get my old machines back instead of having to create new ones, that would keep me from having to fix some shortcuts as well as reconfigure shared folders and other stuff. Thanks EDIT:Running Windows. [Solved]

  Read the article

• Create Google Maps screenshots at regular intervals

  - by Dave Jarvis

  Background People are concerned that building a pipeline to the West Coast of Canada will increase the number of oil tankers, thus increasing the probability of a major oil spill, thereby creating an environmental catastrophe. The AIS Live Ships Map website captures real-time Marine Traffic updates using a Google Maps interface. While it is possible to obtain data from an AIS data feed, often the feeds are either pay-for-use, or otherwise encumbered with license restrictions. Problem The AIS Live Ships website presents a map in the browser: The map above has had its location interactively changed to focus on the area in question: the northern straight of Vancouver Island. Question How would you create a service that captures the map every 30 minutes and that could run, with neither user-intervention nor a significant memory footprint, for a few years? Idea #1 Create a virtual machine. Install and run a light-weight browser. Use Shutter to take captures at regular intervals. Idea #2 Use Python's Ghost Webkit to automate the captures. Thank you!

  Read the article

• How to talk to a virtual host on a guest OS?

  - by Bernd

  Let's say there is a host OS (Mac OS X) and a virtual machine running Ubuntu as guest OS. The guest OS has the IP 192.186.56.101 and some virtual hosts, e.g. ubuntu.server So, how to really map a request to the virtual host ubuntu.server on the guest OS? I tried: Configure the host OS in /etc/hosts to map ubuntu.server to 192.186.56.101 On the guest OS we have the trouble. It accepts the request for 192.186.56.101 which is not ubuntu.server and therefor the ubuntu.server virtual host will never be requested. Just the localhost on the guest OS. It might surely be possible to simply then use 192.168.56.101. But this would only work for one host per guest OS. Any idea? Or is there a bug in my train of thoughts?

  Read the article

• Switching from Windows Virtual PC to VirtualBox without formatting

  - by djechelon

  I have a Win7 virtual machine running on Windows Virtual PC where I'm currently developing. I found that I dislike WVPC, and installed VirtualBox, hoping for better performance. However, importing the existing VHD into a new VM seems to not work, because even if I see the Windows boot screen, the OS will crash on a BSOD and requires the restore tool to run. That tool finds no problem, reboots but the BSOD is still present. I wouldn't like to format a new VM if possible. Is it possible to do such switching?

  Read the article

• How do I install and use Windows Virtual PC in Windows 8?

  - by KronoS

  I really like the integrated Virtual Machine that Windows had built-in with Windows 7 with Windows Virtual PC. I'm looking to install that again. I'd like to be able to install multiple machines as I did before (XP, Ubuntu, Etc,.) but I can't seem to find Windows Virtual PC for Windows 8 any more. Is it still available?, and if not was there something setup in place to replace it? How do I use it? NOTE TO ALL: While this is an accepted self posted answer feel free to edit, comment, or add an answer of your own. If your answer is better than mine, I will accept. This question was a Super User Question of the Week. Read the blog entry for more details or contribute to the blog yourself

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >