Search Results

Search found 4765 results on 191 pages for 'wireless printers'.

Page 33/191 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Multiple connections to the same Wireless Network in Windows 7

  - by Jamek

  Hello, my university just limited bandwidth to 512 kbps (that's 64 kB/s!) for each connection. I was thinking to make multiple connection to the same wireless network (called "internet"), is this possible under Windows 7? I know it's possible to connect to more than one WLAN through the "hostednetwork" concept in netsh: netsh wlan set hostednetwork mode=allow ssid=xxxxx netsh wlan start hostednetwork However this method doesn't seem to work, I don't know if it's due to the authentication method (through certificates while hostednetwork seems to support just a "passphrase") or because I'm already connected to that network with the same MAC. Can you think to some tool able to do this?

  Read the article

• Wireless Disconnects Randomly, then won't reconnect

  - by Nironan12

  Okay, so I have a Gateway laptop, with Windows Vista SP2, and a Linksys-Cisco WRT54GL Wireless-G Broadband Router. When I boot up my laptop, it automatically connects itself to my home network. Then at random times, it disconnects itself from said network. I go to reconnect it, but I get an unknown error and none of Vista's suggestions are working. Sometimes, after 5-10 minutes, it will reconnect itself. I've already tried updating the firmware. I can't install any other firmware, or make a factory reset. My dad owns the router and buys the internet and he won't let me TOUCH it. I can't do ANYTHING to it.

  Read the article

• Dell Vostro 1510 can't connect to wireless--how can I fix this?

  - by Miss Spider

  I'm having some trouble with my Dell Vostro 1510. I installed wubi on it two days ago and I've only been able to use the Internet with an ethernet cable. The network seems to definitely recognize that the wireless--even other peoples' wireless--is there, but it can't manage to get on. I'll post the lpsci here, so that you can see the Broadcom card I'm working with. I have downloaded the kernel 2.6.39-0-generic, which doesn't appear to have done a lick of work. 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• trying to set up wireless router, failing

  - by j j

  Hi, I am trying to set up Netgear's wireless-n WNR2000 router, following their oversimplified 5- step process for plugging in wires, and I'm not having any success. It comes down to: once everything is wired and turned on in the correct order, all of the LEDs match the image they give of 'what should be lit up', but their setup disk still doesn't find the router. They have a site to set up the router manually, www.routerlogin.net, which I cannot navigate to, even while wired directly to the router. http://192.168.1.1 doesn't connect to anything, either. The interesting part: i get ping replies from Google's DNS server at 8.8.8.8 while this is set up. but cannot connect to any web site by name, since the router's DNS isn't set up. One thought is that the router and modem both have the same IP address, so it's conflicting, but I'm not sure how I'd resolve that. Any ideas?

  Read the article

• Sharing Internet over Wireless Router

  - by Alandt

  I have a very strange question today - how do I share my dial up internet (yeah I know you are gonna say that is slow but broadband internet isn't available in my area), so dial up and 3G connection is all I got. I also have a Vodafone USB 3G modem that picks up 3G network, I am planning to use my Vodafone 3G modem in the day since I have free dial up internet from 7:00 pm in the night untill 7am the next morning. Some additional details: * My PC is running Windows XP Professional SP3 * I have a Sitecom Wireless Router 150N X1 WLR- 1000 I would appreciate it if anyone can provide me with a step-by-step guide! Thanks

  Read the article

• Wireless Bridge -DHCP

  - by Usta

  I was thinking of picking up a couple of TP-Link wireless routers, and setting them to bridge. I have a sep. LAN network that would have one of them, and I'd put one on my internet connection. Would I be able to keep my current IP subnets? (255.255.255.0 and 255.0.0.0) or would I have to pull my IPs from the same IP range. (I want to keep my current DHCP servers in place) The reason I want a bridge is so that I can VPN into the internal network.

  Read the article

• Computer freezes, wireless network icon disappears

  - by Heidi

  As you can see I have two problems. I have a Toshiba Tecra A3 computer. It is 5-6 years old and it is connected to a D-link router. For a period now it has not been working correctly. The computer freezes either when i try turning it on or when I have been using the computer for a short period of time. The times the computer works normally I have a problem with a disappearing wireless network icon, and so I have no internet. Can this be fixed or do I have to buy a new computer? I only use the computer for internet surfing and easy tasks like word etc, so I would like to keep it as long as possible.

  Read the article

• Connect a Sitecom WL-174 to another wireless router

  - by Thijs Wouters

  I used to connect via a Sitecom WL-174 directly to ADSL internet. There were some pc's which connected wirelessly and some connected with a wire. Now we got another provider and we need to use the router which came with it. It is also a wireless router. It works perfectly. But I need to connect the other pc's which were connected with a wire previously. Is it possible to connect the Sitecom router wirelessly to the other router? If so, how? Thanks.

  Read the article

• Blacklist a single access point of a wireless network

  - by Zr40

  At my university, one of the wireless access points is failing. When something tries to associate to the network using that access point, it deassociates the client, claiming 802.1X authentication failure. Other access points do work normally using the same credentials. The issue has been reported, but after a month it still has still not been fixed. Now, I'm looking for a way to blacklist the access point's BSSID, so the OS prefers other access points on the same SSID. How can I blacklist specific BSSIDs in either Mac OS X Snow Leopard or Windows 7?

  Read the article

• D-link Local wireless

  - by Filippo

  I created a wireless network inside a D-Link DIR-301 connected to a Mac, What I want is that every device to connect to this network if the browser automatically opens instead of the default homepage, it redirects to my website already set in the localhost of the machine which also has the router attached. I'd also like to see that instead of the IP to connect to the site, there will be a "fake" link. What do you advise me? how can I proceed? I state that I am a bit novice in this field, being more a web programmer.

  Read the article

• Wireless adapter won't enable

  - by user52141

  I bought a d-link dwa-125, plugged it in and windows recognized it right away and said everything was good to go. But there were no connection options. When I open up the network control panel and have it show me the adapters... the wireless adapter is greyed out and says it is disabled. So I tell it to enable. It says is it enabling, then says it is enabled... but the adapter stayed greyed out saying disabled. I am running 7 x64. I have reinstalled drivers, connected it via lan and had it update drivers.. same problem. It works just fine on any other computer in the house, just not this one.

  Read the article

• Ubuntu 12.04 wireless detected, but can't connect to 128-bit WEP enabled microsoft MS-700 base station

  - by ubuntufan

  I installed Ubuntu 12.04 on a Presario R 3000. The Wireless card was not detected (firmware missing). Based on several related posts, I downloaded and installed the b43 driver and wireless was finally enabled. However, I am unable to connect to my base station successfully. The base station is configured for WEP 128-bit. I tried both infrastructure mode and ad-hoc mode (with the channel, band, etc. configured). Appreciate any help in trying to get past this.

  Read the article

• Wired and Wireless Network Duplication

  - by Dave

  Howdy! Running into an issue when some of our client's have their laptop's connected via the wired ethernet network aswell as on the WLAN of the same network. There is know issues caused to the end clients.. BUT! Being a Managed Services Engineer i get pretty over the alerts that come through on our reports for machine's with the same hostname on the same network! We are not going to remove this monitoring because it does help a lot with detecting and stopping inferior users and things like that. So basically.. Question is, is there a way in Windows (third party programs welcome) to disable the wireless network when a wired network is connected and operational.. I know that Windows automticaly 'prefers' the wired network, however they are still both connected and therfore there is duplicate hostnames on the same network. Could also have stupid issues with DNS and things like that! Thanks!

  Read the article

• My wireless network slows down every 7.5 minutes when my desktop is switched on

  - by Dog Ears

  My network has lag spikes lasting for a few seconds every 7.5 mins. The spikes also effect any other computer connected connected to my wirless router at the time. My wife has to connect her laptop via a cable to prevent the lag causing problems when she's VPNing into her work. If I switch my PC off the problem goes away! I've got an Edimax 7728ln 802.11n wireless card and Speedtouch 585v7 (I'm with Be) I've Tried... Updated the drivers from Edimax website: 2.0.3.0 (it does say 3.0.2.0 in devices properties though) WLAN Optimizer doesn't seem to be helping What can I do?

  Read the article

• Viewing auto-created printers on a 2008 R2 Remote Desktop Services server

  - by LukeR

  On our 2003 Terminal Servers I am able to view any auto-created printers for users connected to that server, however on a new 2008 R2 RDS server I can only view local printers and my own auto-created printer(s). I have local and domain admin privileges. Is there something I need to change to be able to view all client printers? Is it possible? I have had a look for permissions relating to this but couldn't really find much that looked relevant.

  Read the article

• How to completely remove a wireless network setup from vista?

  - by 3d1l

  To remove a wireless connection setup I basically go to (network and sharing center) then select (manage wireless network) and then from the list of wireless networks I right click on the one that I want to remove and select (remove network) from the drop down menu. Problem is that when I go to define the wireless network again the system said that the network connection already exist so it seems that even when the wireless network definition is not longer display in the connections list, Vista keeps the configuration somewhere. So How can I be sure that a particular wireless network has been completely removed?

  Read the article

• Accessing Network Printers from a Citrix Session:

  - by Harry

  We have an application that uses Active Reports documents. You pass a document the UNC of the printer and away it goes. We have a group that runs this application within a Citrix session and the truly networked printers function perfectly but shared printers that work well outside of Citrix become unreachable. Printers do not need to be defined on the machine running the report for the system to work. There is something in the way Critrix passes the information to the destination UNC that I don’t understand.

  Read the article

• Accessing Network Printers from a Citrix Session:

  - by Harry

  We have an application that uses Active Reports documents. You pass a document the UNC of the printer and away it goes. We have a group that runs this application within a Citrix session and the truly networked printers function perfectly but shared printers that work well outside of Citrix become unreachable. Printers do not need to be defined on the machine running the report for the system to work. There is something in the way Critrix passes the information to the destination UNC that I don’t understand.

  Read the article

• How should I troubleshoot a problematic wireless connection on Linux?

  - by Gearoid Murphy

  I recently purchased a netgear 150 usb wireless dongle for use with my 11.10 Xubuntu amd64 system. Using the network-manager interface, I can see local wireless networks and enter the authentication details for my local wireless lan. Unfortunately, the connection does not seem to work, I keep getting notifications that my wireless has disconnected (but none indicating that I've connected). When I examine syslog, it seems to indicate that I've successfully associated with the wireless switch and that dhcp has successfully acquired an ip address but the log shows that the dhcp process keeps sending requests, eventually dropping the connection. 'ifconfig wlan0' never shows the dhcp address logged in syslog. I suspect that the problem lies with the usb dongle, my configuration or the wireless switch but I am not certain how to isolate the problem, can anyone provide some insight on how I should go about homing in on the cause of this problem or verifying the functionality of the individual components, thanks.

  Read the article

• Networking problems in VMWare with wireless bridge

  - by Robert Koritnik

  Barebone data: virtualization: VMWare Workstation 6.5 (latest) Host: Windows Server 2008 x64 Guest: Windows Server 2008 x86 Host network adapter: wireless Guest network adapter 1: over Bridge VMNet (automatic) Guest network adapter 2: over Host only VMNet Problem When I surf the net within VM my internet connection just gets stalled (not dropped). It doesn't experience any timeout whatsoever, it just stops downloading/communicating. For instance: I start downloading a file with a browser (IE/FF/CR doesn't matter) and I have to pause/restart download when speed drops to 0. I could wait indefinitelly but connection won't pickup automatically. What did I miss in my network configuration? Update 1 I've tested this in various combinations. This works fine when host is connected via Ethernet. But when connected via Wifi, the connection on the guest works as previously described. It connects fine. It gets a valid IP from DHCP... Everything is cool as long as you don't start doing some intensive network traffic (ie. download a 2MB file) In this case it starts downloading and stops after a while. Speed just drops to 0B/s... Sometimes it picks up back, sometimes it doesn't. Connection still stays and works. I can ping around with no problem.

  Read the article

• Most transparent way to connect two LANS using a WET610N Wireless Bridge

  - by Spencer Ruport

  I have two wired systems hooked to a Linksys WRT54GL wired/wireless router which is also hooked to my internet. I'll refer to this as LAN1. I have two more systems in another room that are connected wirelessly. Recently I decided I would much rather have another wired LAN in the other room and use a bridge to connect them. This would be LAN2. Prior to hooking up the device I assumed that the ethernet side of the bridge would have a DHCP server so that I could simply hook it up to a switch and I'd be on my way. However that isn't the case which leads me to believe I'll have to add one to LAN2 correct? Or is there some way to have the DHCP from LAN1 also hand out IP addresses to LAN2? If I do need a DHCP device on LAN2 what would be best? Another hardware device or should I just install some DHCP software on one of the systems (since they're both on 24/7 anyway). Any recommendations would be appreciated. :)

  Read the article

• Handheld Linux device can't see one wireless network

  - by Nathan

  I'm using a Nokia N810 running OS 2008 (version 5.2008.43-7; should be the latest). It can see networks up and down the street in my neighborhood and can connect to mine using WEP. I can also connect to free networks at restaurants and the like. When I bring it into work, it can't see a wireless network ("No connections available"). When I use netstumbler on my laptop I can see a list of several essids showing green connectivity for the network. I know that the network has its essid broadcast, and I know that it's unsecured. When I run iwlist wlan0 scan, I see several APs with no essid, but I don't see anything with an essid set. I have verified using iwlist that my hardware supports the correct channels and speeds. I know this isn't a Nokia/mobile forum, but it's running what's basically a Debian kernel. Any suggestions on what to do in this case? I'm really frustrated by this. Thanks, Nathan

  Read the article

• Setting up 802.1X wireless connection on OSX

  - by hizki

  I am an OSX user, I have Snow Leopard 10.6.5 and an updated AirPort (version 5.5.2). I am trying to connect to my university's wireless network, but it has a 802.1x security that I am having trouble defining... Here there are instructions for connecting with Windows XP, Windows 7 and Linux. Can someone please instruct me what should I do to set up this network on my Mac? I have had previous success in setting up this network, but I have no idea what I did that made it work. Since I updated my AirPort (to version 5.5.2) it worked only seldomly and very slowly... Before the update, even when it worked it never remembered my password. Update: I have already tried to create a new "location", removed all the 802.1x user profiles and all the remembered networks, and made sure the in the TCP/IP tab 'Configure IPv4' is set to "Using DHCP". I also moved /Library/Preferences/SystemConfiguration/preferences.plist to my desktop in attempt to force the system to create a new set of settings. Still I can define the connection to work.

  Read the article

• Connect to Nonencrypted Wireless Network Using Ubuntu Commands

  - by Tim

  I failed to connect to an open i.e. nonencrypted wireless network using Ubuntu command lines. Here is what I did: $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo /sbin/ifconfig wlan0 up $ sudo iwconfig wlan0 essid "Cavalier High-Speed 866-4-CAVTEL" $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 10812 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. Trying recorded lease 192.168.1.67 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Trying recorded lease 192.168.1.45 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. $ sudo /sbin/iwconfig wlan0 wlan0 IEEE 802.11bg Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I was wondering what the problem is and how I can do it right? Thanks and regards!

  Read the article

• how to set up dual wireless routers (G and N) with single broadband connection

  - by user15973

  A local cafe has an 802.11g wireless router attached to either an 8- or 12Mbs broadband connection. Although many customers still have -g devices, an increasing number are showing up with 802.11n devices (e.g. Mac laptops, iPads). The cafe owner is content with his router's area coverage, but he would like for his customers to be able to take advantage of the higher -n download speeds. He could simply replace the -g router with a -n router, but reportedly -n routers slow down considerably when servicing both -g and -n connections. Another option would be to buy the -n router, run an Ethernet cable between the two routers, and (of course) hook up the broadband connection to one of the two routers. Still another option would be to attach an ordinary, wired switch to the broadband connection and then attach both routers to the switch. Aside from the cost issue, what are the tradeoffs of those approaches? Which would you recommend, and why? Is there a better option than the ones I mentioned? Thank you in advance for your advice.

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >