Search Results

Search found 4765 results on 191 pages for 'wireless printers'.

Page 38/191 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• wifi not recognized

  - by pumper

  I had wifi and worked then some day ubuntu asked me to update some packeages and restarted the system and after that no wifi. this is my wireless_script output : ########## wireless info START ########## ##### release ##### Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty ##### kernel ##### Linux S510p 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ##### lspci ##### 02:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Lenovo Device [17aa:3026] Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10) Subsystem: Lenovo Device [17aa:3807] Kernel driver in use: alx ##### lsusb ##### Bus 001 Device 006: ID 0eef:a111 D-WAV Scientific Co., Ltd Bus 001 Device 007: ID 0cf3:3004 Atheros Communications, Inc. Bus 001 Device 004: ID 174f:1488 Syntek Bus 001 Device 003: ID 03f0:5607 Hewlett-Packard Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ##### PCMCIA Card Info ##### ##### rfkill ##### 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no ##### iw reg get ##### country 00: (2402 - 2472 @ 40), (3, 20) (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS ##### interfaces ##### # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig wlan0 up # line maintained by pppoeconf provider dsl-provider auto wlan0 iface wlan0 inet manual ##### iwconfig ##### wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off ##### route ##### Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface ##### resolv.conf ##### ##### nm-tool ##### NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: alx State: unavailable Default: no HW Address: <MAC address removed> Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: unmanaged Default: no HW Address: <MAC address removed> Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ##### NetworkManager.state ##### [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ##### NetworkManager.conf ##### [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq no-auto-default=<MAC address removed>, [ifupdown] managed=false ##### iwlist ##### wlan0 Scan completed : Cell 01 - Address: <MAC address removed> Channel:1 Frequency:2.412 GHz (Channel 1) Quality=55/70 Signal level=-55 dBm Encryption key:on ESSID:"mohsen" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000076c342498 Extra: Last beacon: 12ms ago IE: Unknown: 00066D6F6873656E IE: Unknown: 010882848B960C121824 IE: Unknown: 030101 IE: Unknown: 2A0104 IE: Unknown: 32043048606C ##### iwlist channel ##### wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz ##### lsmod ##### ath3k 13318 0 bluetooth 395423 23 bnep,ath3k,btusb,rfcomm ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626489 1 ath9k cfg80211 484040 3 ath,ath9k,mac80211 ##### modinfo ##### filename: /lib/modules/3.13.0-24-generic/kernel/drivers/bluetooth/ath3k.ko firmware: ath3k-1.fw license: GPL version: 1.0 description: Atheros AR30xx firmware driver author: Atheros Communications srcversion: 98A5245588C09E5E41690D0 alias: usb:v0489pE036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE02Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE003d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3121d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3402d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04C5p1330d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE056d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Ed*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3393d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE057d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0220d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0219d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3362d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3006d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3375d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p817Ad*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p0036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v03F0p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE027d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0215d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3304d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE019d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3002d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3000d*dc*dsc*dp*ic*isc*ip*in* depends: bluetooth intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: BAF225EEB618908380B28DA alias: platform:qca955x_wmac alias: platform:ar934x_wmac alias: platform:ar933x_wmac alias: platform:ath9k alias: pci:v0000168Cd00000036sv*sd*bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002810bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Fsd00007202bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002130bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000612bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000652bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000642bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Dbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Abc*sc*i* alias: pci:v0000168Cd00000036sv00001028sd0000020Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd0000217Fbc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd000018E3bc*sc*i* alias: pci:v0000168Cd00000036sv000017AAsd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd0000213Abc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000662bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000672bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000622bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003028bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E069bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003025bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002812bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002811bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00006671bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000632bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd0000A119bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E068bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002176bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003028bc*sc*i* alias: pci:v0000168Cd00000037sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv000010CFsd00001783bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000064bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000063bc*sc*i* alias: pci:v0000168Cd00000034sv0000103Csd00001864bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006641bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006631bc*sc*i* alias: pci:v0000168Cd00000034sv00001043sd0000850Ebc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002110bc*sc*i* alias: pci:v0000168Cd00000034sv00001969sd00000091bc*sc*i* alias: pci:v0000168Cd00000034sv000017AAsd00003214bc*sc*i* alias: pci:v0000168Cd00000034sv0000168Csd00003117bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006661bc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002116bc*sc*i* alias: pci:v0000168Cd00000033sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv00001043sd0000850Dbc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C01bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C00bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F95bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001195bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F86bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001186bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002001bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002000bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Fsd00007197bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Ebc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006628bc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006627bc*sc*i* alias: pci:v0000168Cd00000032sv00001C56sd00004001bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002100bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002C97bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003219bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003218bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C708bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C680bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C706bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Ebc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Dbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004106bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004105bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003122bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E075bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002152bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd0000126Abc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002126bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001237bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002086bc*sc*i* alias: pci:v0000168Cd00000030sv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Esv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Dsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Csv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv00001A3Bsd00002C37bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd00001536bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Dbc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Cbc*sc*i* alias: pci:v0000168Cd0000002Asv0000185Fsd0000309Dbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A32sd00000306bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006642bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006632bc*sc*i* alias: pci:v0000168Cd0000002Asv0000105Bsd0000E01Fbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A3Bsd00001C71bc*sc*i* alias: pci:v0000168Cd0000002Asv*sd*bc*sc*i* alias: pci:v0000168Cd00000029sv*sd*bc*sc*i* alias: pci:v0000168Cd00000027sv*sd*bc*sc*i* alias: pci:v0000168Cd00000024sv*sd*bc*sc*i* alias: pci:v0000168Cd00000023sv*sd*bc*sc*i* depends: ath9k_hw,mac80211,ath9k_common,cfg80211,ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 parm: debug:Debugging mask (uint) parm: nohwcrypt:Disable hardware encryption (int) parm: blink:Enable LED blink on activity (int) parm: btcoex_enable:Enable wifi-BT coexistence (int) parm: bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int) parm: ps_enable:Enable WLAN PowerSave (int) filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko license: Dual BSD/GPL description: Shared library for Atheros wireless 802.11n LAN cards. author: Atheros Communications srcversion: 696B00A6C59713EC0966997 depends: ath,ath9k_hw intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: 4809F3842A0542CD6B556D3 depends: ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath.ko license: Dual BSD/GPL description: Shared library for Atheros wireless LAN cards. author: Atheros Communications srcversion: 88A67C5359B02C5A710AFCF depends: cfg80211 intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 ##### modules ##### lp rtc ##### blacklist ##### [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac [/etc/modprobe.d/fbdev-blacklist.conf] blacklist arkfb blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist cirrusfb blacklist cyber2000fb blacklist gx1fb blacklist gxfb blacklist kyrofb blacklist matroxfb_base blacklist mb862xxfb blacklist neofb blacklist nvidiafb blacklist pm2fb blacklist pm3fb blacklist s3fb blacklist savagefb blacklist sisfb blacklist tdfxfb blacklist tridentfb blacklist viafb blacklist vt8623fb ##### udev rules ##### # PCI device 0x1969:0x1090 (alx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x168c:0x0036 (ath9k) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" ##### dmesg ##### [ 1.707662] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03) [ 11.918852] ath: phy0: WB335 1-ANT card detected [ 11.918856] ath: phy0: Set BT/WLAN RX diversity capability [ 11.926438] ath: phy0: Enable LNA combining [ 11.928469] ath: phy0: ASPM enabled: 0x42 [ 11.928473] ath: EEPROM regdomain: 0x65 [ 11.928475] ath: EEPROM indicates we should expect a direct regpair map [ 11.928478] ath: Country alpha2 being used: 00 [ 11.928479] ath: Regpair used: 0x65 [ 14.066021] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ########## wireless info END ############

  Read the article

• HP dv2700 series, Wifi not working in Ubuntu 12.10, Wifi Button always disabled

  - by Chicoscience

  I have a HP dv2745se laptop. I always had Ubuntu with the Native Windows Vista and Wifi worked fine. Suddenly my Ubuntu wouldn't load anymore, I tried fixing it for a week and eventually I formatted its partition and just installed Ubuntu 12.10 This laptop has a Wifi switch that works fine in Vista disabling / enabling the wireless connection. HP Wireless Assistant in Windows say Wireless is on. However, whenever I log in Ubuntu the Wifi button is always orange (disabled) and Wireless never works. I had this problem once when I had Ubuntu 12.04 and I fixed it by verifying in Windows that the Wireless Assistant showed the Wireless LAN in "On" mode. However, the same does not work now. I've seen some possible solutions that involve updating the firmware with apt-get. There comes my 2nd problem, my network adapter card is not working and thus I have no internet at all. Any suggestions? Thanks!

  Read the article

• Cannot load a webpage with hp pavilion dv2000 laptop

  - by Andre'

  I am using an Ubuntu 12.04 cd to test out the os before I take the plunge, and I can't get webpages to load in the firefox application. When I look at the wireless settings, ubuntu says that my computer is connected to my home wireless network, but I am repeatedly prompted to enter my password (it keeps telling me that authentication is required by my wireless network). After a few rounds of this, Ubuntu seems to give up and tells me that wireless network is disconnected. Furthermore (I'm currently in ubuntu using a wired connection if it has anything to do with this), the wireless connection will randomly attempt to establish itself. I've entered rfkill list and all of the wireless devices therein say "no" - they're not blocked. I can connect to the network in Windows 7, so I don't think my network is the problem. Any suggestions?

  Read the article

• Is there a way to disable the hardware on/off switch for the Wireless interface?

  - by avee

  I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

  Read the article

• Removing connections to network printers that no longer exist

  - by Jeff Hardy

  I'm trying to delete some network printer connections from a Windows Server 2003 (SP2) machine because the printer shares no longer exist. Windows shows the printers' status as "Printer not found on server, unable to connect"; this is expected; the printers are now on a different server. Only one machine ever connected to the printer shares; it no longer needs to and I'd like to clean it up. However, when I try to delete the connections, I get an error message: --------------------------- Remove Printer --------------------------- Printer connection cannot be removed. Operation could not be completed. --------------------------- OK --------------------------- The "solutions" I've found online seem to be more voodoo than anything (and they still don't work!). Does anybody know how I can delete these long-gone printers?

  Read the article

• Eliminating Duplicate Printers on Print Server 2008 R2

  - by user123247

  I added a print server role to our new 2008 R2 server and started adding printers to it that will be available to Remote Desktop sessions. When I added the Remote Desktop services role, I specified printer redirection, thinking that would be a good thing. On the PCs where I am testing all this, I added the network printers locally so that they would have the printer available for local use. When I logon to the 2008 R2 server, I notice that the printers I added are out there twice... once on the 2008 R2 server and an additional time redirected from my PC. Is there some way to eliminate this duplication w/o eliminating redirection?

  Read the article

• No keyring secrets found for [ssid] /802-11-wireless-security, ubuntu 12.04

  - by acimer

  I'm on Ubuntu 12.04 x64bit, installed it couple of days ago. The issue i'm having is this: on startup it connects to my wireless without a problem, but after a while I am disconnected and prompted to enter the key for the wireless network (which is entered - saved) so i just click 'ok', but wireless doesn't connect again. Reseting network manager doesn't help either. Only restart, after which, ubuntu connects to the said wireless without a problem. Terminal outputs this error message: ** Message: No keyring secrets found for cimermanovic /802-11-wireless-security; asking user. cimermanovic is the ssid name. also, here are some error messages that network manager is giving: (nm-applet:31926): GdkPixbuf-CRITICAL **: gdk_pixbuf_scale_simple: assertion `dest_width 0' failed (nm-applet:31693): GdkPixbuf-CRITICAL **: gdk_pixbuf_scale_simple: assertion `dest_width 0' failed (nm-applet:30184): GdkPixbuf-CRITICAL **: gdk_pixbuf_scale_simple: assertion `dest_width 0' failed What should i do to fix this? Thanks!

  Read the article

• How do I get the Apple Wireless Keyboard Working in 10.10?

  - by Jamie

  So I've gone and bought a Magic Mouse and Apple Wireless Non-Numeric Keyboard. The magic mouse worked out-of-the-box almost perfectly, except for the forward/back gesture which still isn't functioning, whereas the keyboard didn't. It has constant trouble with the bluetooth connection. Only the 7, 8 and 9 buttons and volume media keys correspond correctly with the output. Pressing every single key on keyboard has this output: 789/=456*123-0.+ When I use Blueman the keyboard can be setup and shows up in "Devices" but I get a warning when I click "Setup"; "Device added successfully, but failed to connect" (although removing the keyboard and setting it up as a new device doesn't incur this error). Using gnome-bluetooth I have encountered no error messages but it connects properly less often than Blueman and I can still only type the aforementioned output. What am I not doing? Where is this going wrong? EDIT: I have read this http://ubuntuforums.org/showthread.php?t=224673 inside out several times to no avail. It seems these commands don't work for me with the apple peripherals sudo hidd --search hcitool scan Fortunately I have the luxury of a 1TB hard drive, near limitless patience and no job. I have installed a fresh Ubuntu 10.10 64bit (albeit smaller than mine) and after updating and restarting for the first time, I set up my devices in exactly the same way as I have learnt on my original install I succeeded once again with the mouse and, to my joy, with the keyboard also. Though I could not seem to find Alt+F2 and had to reconfigure that and several other keyboard shortcuts, the keyboard is working and in a spectacular fashion. Still, this leaves me with the issue of my original install. I returned to it with some new found knowledge but failed again. Perhaps I have a missing dependancy? I did uninstall bluetooth after the initial set up and reinstalled it recently for the pupose of these peripherals. Maybe it's because I'm running 64bit? This is still not solved, but easily avoided by not changing too much from the original install. Just hide stuff or turn it off, don't uninstall too much.

  Read the article

• Cant connect to wireless network in a specifc room in house

  - by Moez Hirani

  I am facing a weird issue. I have a Toshiba Satellite L550 laptop. I live in a basement and until sometime ago , it used to be able to reach the wireless network. But now it is not alble to. It works and is able to connect to the wireless in all parts of the basement except my room. I also tried it at my school and work and my sister's place and it is able to connect. Can someone please help me out with what might be the problem?

  Read the article

• Programmatically changing wireless router settings - Netgear ideally

  - by Darvis Lombardo

  Is it possible to programmatically change settings on a Netgear wireless router using C#? I have settings that I change often and I would like to create my own interface for making those changes. Currently I navigate to the admin web page (10.0.0.1) and it prompts me for a username and password. After I authenticate I can use the web interface to change the router's configuration. If this isn't possible with Netgear, do any outher wireless routers have an API for developers? Thanks! Darvis

  Read the article

• How to blacklist a problem Wi-Fi access point by MAC address in Mac OS X

  - by Sam Alexander

  So I am a small Mac-user cog in a larger Windows-based network machine. The network here works fine for most everyone else (on PCs), but I have random timeouts and issues with the Wi-Fi. Luckily, I have identified a few problem access points by MAC address (via their log messages in Console.app). Is it possible to tell my AirPort on my Macbook to avoid those access points, and only speak with the access points who are far less touchy about me drinking the Apple kool-aid? All of the points are on the same network SSID.

  Read the article

• Intel Centrino Ultimate-N 6300 vs Advanced-N 6200 2x2

  - by wag2639

  Does the Ultimate-N 6300 actually offer better performance than the 6200? Are there any stats or benchmarks to show the difference? Also, what about battery performance? Does using the extra stream consume significantly more battery?

  Read the article

• What's a good, affortable router that will not give me problems when downloading torrents?

  - by Lirik

  I found several routers on newegg and they're in the $50-60 range, but I'm not sure if they'll handle the number of connections that are created when downloading torrents (100-300 seeds and around 50 peers). My roommate watches netflix movies, my brother and I download torrents, so my NETGEAR router ends up choking on the traffic and I have to restart it quite frequently. I've already posted a couple of questions on the topic and I've come to the conclusion that I need a new router. What are some routers that I should consider (my budget is in the $50 range)?

  Read the article

• What's a good, affortable ruter that will not give me problems when downloading torrents?

  - by Lirik

  I found several routers on newegg and they're in the $50-60 range, but I'm not sure if they'll handle the number of connections that are created when downloading torrents (100-300 seeds and around 50 peers). My roommate watches netflix movies, my brother and I download torrents, so my NETGEAR router ends up choking on the traffic and I have to restart it quite frequently. I've already posted a couple of questions on the topic and I've come to the conclusion that I need a new router. What are some routers that I should consider (my budget is in the $50 range)?

  Read the article

• How to blacklist a problem wifi access point by MAC address in OSX

  - by Sam Alexander

  So I am a small mac-user cog in a larger windows-based network machine. The network here works fine for most everyone else (on PCs), but I have random timeouts and issues with the Wifi. Luckily, I have identified a few problem access points by MAC address (via their log messages in Console.app). Is it possible to tell my Airport on my Macbook to avoid those access points, and only speak with the access points who are far less touchy about me drinking the Apple kool-aid? All of the points are on the same network SSID.

  Read the article

• How to make DD-WRT router's (configured like a repeater) devices be accessible on LAN? (i.e. integrate DHCP for both routers)

  - by Annonomus Penguin

  I have a D-Link DIR-600-A1 router running DD-WRT (using the 601's firmware: except for the model number, they are near identical). It has an Atheros chip, so there is no "repeater" option. You can bypass this by setting the main radio as a client to the main router, and adding a virtual radio configured as an AP. You can then set up the credentials for connecting to the main router and allowing devices to connect to the repeater/router. I have a few devices on my network: Ethernet computers Server with Samba running WiFi devices connected to the main router I then wanted to add a repeater. I have a couple of other things on the repeater: WiFi Computer Other WiFi devices. Anyway, I wanted to connect my WiFi computer to the share on my server via Samba. However, for some reason, my router treats the main router as WAN, not another device. I've tried disabling the SPI firewall: However, that doesn't work. I've tried pinging my WiFi computer from my server. However, I can ping my server from my WiFi computer. AFAIK, they are on the same subset, just using different IPs: the main one uses 192.168.0.x and the repeater uses 192.168.1.x (starting at 100 for some reason). It seems as I need to configure my router(s) to work together for DHCP. I noticed there was a "DHCP forwarder" option, but I have no idea what that would do. A quick note: for some reason (that's beyond me) my ISP disabled the capability to bridge a WiFi to ethernet connection with the router they provide (something about PPPoE or similar...). The service rep I talked to when I was having issues after I changed ISPs said that, but they couldn't explain exactly what they were "blocking." How can I get DD-WRT to not treat the client connection as WAN and the router to recognize the devices connected to the repeater?

  Read the article

• Ericsson W35 ssh administration

  - by jblaster

  I picked up a Ericsson W35 at a pawn shop the other day and when I login to the administration section at 192.168.1.1 I get an error message about connecting to the database. It apparently supports ssh administration and I get a password prompt when attempting to ssh [email protected] but no passwords I try work and theres no documentation for it. Has anyone had success with ssh on the Ericsson W35 and is this issue fixable? Thanks.

  Read the article

• Configuring a Genius GW-7200 Access Point

  - by alex

  I came across an access point we had a few years ago. I'm now trying to get it set up to work on our network. here are a couple of pictures: http://twitpic.com/194u06/full http://twitpic.com/194u0v/full I have plugged this into our network via the network port on the back. I set up a DHCP reservation, based on the MAC address on the back of the access point, however I cannot ping it, nor access the web interface. I've held down the reset button for 10 seconds, to see if that would do anything. Google doesn't come up with anything on the matter :-(

  Read the article

• Connected 2 routers, but they won't talk

  - by ekolis

  I'm trying to set up a second WLAN at home (since the Nintendo DS firmware won't connect to my WPA-encrypted main WLAN), but when I connect my second router's WAN port to one of my main router's LAN ports, the routers won't talk, and I can't connect wirelessly to the second router. I can still see the second router's WLAN - I am just unable to connect to it. And it seems that even the main router can't see the second router, despite being plugged directly into it - I went to the main router's admin console and pinged the second router (which is receiving an IP address), but it was unable to reach it! Does anyone know what might be wrong? Thanks!

  Read the article

• Two Routers - 1 Port Straight to First Router

  - by apples

  At my house we have two Wifi routers one's connected directly to the modem and the other is plugged in down stairs as a second network(Directly connected to the first router) Is there a way that I could make it so that I have the second router have its own network, but have one or two ports that would act as if they were directly connected to the first router? That way I can port forward to devices on the second router. Here are the information about the routers: Router 1 - Linksys WRT54G Running stock firmware Router 2 - Linksys E900 Running Tomato Firmware So to summarize what I'm asking is how would I have two networks from two routers but be able to connect directly to the first router through one of the ports on the second router. Here's a Visio Drawing of what I would like to look like

  Read the article

• iPod Touch G4 disconnects from Belkin N+ Router at random intervals

  - by leeand00

  I have an iPod Touch G4 and a Belkin N+ Router F5D8235-4 v2, and for some reason the iPod Touch disconnects from the router at random intervals. Checking the settings in the iPod, it will read that it is still connected to the router, but before I can access the internet again, I have to turn on Airplane mode and then turn it off again to get any program to work with the Internet again. I've tried upgrading the firmware in the router, but that also doesn't seem to help. I'm using the wiresless mode 802.11b&802.11g&802.11n in the 20/40MHz frequency. Is there any way of fixing this issue? It doesn't happen with any of the other devices that are connected to the router. This post has been cross-posted here

  Read the article

• My NetGear router suddenly started showing limited access for all wifi connected laptops

  - by Yasser

  I have netgear n300 router which I had installed about 6 months back. Here is how the setup is, I have a local internet provider by the name of "Hathway" they have this modem which is in turn connected to the router and a wire from router is connected to my desktop. As shown in this pic below, except for the laptop I use a desktop rest all the connection is same So with this connection and the below configuration, every thing worked fine. The desktop would work also all my laptops and mobile devices would connect and be able to access the internet without any problem. Now suddenly since yesterday (with no changes made whatsoever to this config) all my laptops start showing the limited connection message and cannot connect to the internet. However the desktop which is connected can access the internet. Can someone please guide me on this.

  Read the article

• What to filter when providing very limited open WiFi to a small conference or meeting?

  - by Tim Farley

  Executive Summary The basic question is: if you have a very limited bandwidth WiFi to provide Internet for a small meeting of only a day or two, how do you set the filters on the router to avoid one or two users monopolizing all the available bandwidth? For folks who don't have the time to read the details below, I am NOT looking for any of these answers: Secure the router and only let a few trusted people use it Tell everyone to turn off unused services & generally police themselves Monitor the traffic with a sniffer and add filters as needed I am aware of all of that. None are appropriate for reasons that will become clear. ALSO NOTE: There is already a question concerning providing adequate WiFi at large (500 attendees) conferences here. This question concerns SMALL meetings of less than 200 people, typically with less than half that using the WiFi. Something that can be handled with a single home or small office router. Background I've used a 3G/4G router device to provide WiFi to small meetings in the past with some success. By small I mean single-room conferences or meetings on the order of a barcamp or Skepticamp or user group meeting. These meetings sometimes have technical attendees there, but not exclusively. Usually less than half to a third of the attendees will actually use the WiFi. Maximum meeting size I'm talking about is 100 to 200 people. I typically use a Cradlepoint MBR-1000 but many other devices exist, especially all-in-one units supplied by 3G and/or 4G vendors like Verizon, Sprint and Clear. These devices take a 3G or 4G internet connection and fan it out to multiple users using WiFi. One key aspect of providing net access this way is the limited bandwidth available over 3G/4G. Even with something like the Cradlepoint which can load-balance multiple radios, you are only going to achieve a few megabits of download speed and maybe a megabit or so of upload speed. That's a best case scenario. Often it is considerably slower. The goal in most of these meeting situations is to allow folks access to services like email, web, social media, chat services and so on. This is so they can live-blog or live-tweet the proceedings, or simply chat online or otherwise stay in touch (with both attendees and non-attendees) while the meeting proceeds. I would like to limit the services provided by the router to just those services that meet those needs. Problems In particular I have noticed a couple of scenarios where particular users end up abusing most of the bandwidth on the router, to the detriment of everyone. These boil into two areas: Intentional use. Folks looking at YouTube videos, downloading podcasts to their iPod, and otherwise using the bandwidth for things that really aren't appropriate in a meeting room where you should be paying attention to the speaker and/or interacting.At one meeting that we were live-streaming (over a separate, dedicated connection) via UStream, I noticed several folks in the room that had the UStream page up so they could interact with the meeting chat - apparently oblivious that they were wasting bandwidth streaming back video of something that was taking place right in front of them. Unintentional use. There are a variety of software utilities that will make extensive use of bandwidth in the background, that folks often have installed on their laptops and smartphones, perhaps without realizing.Examples: Peer to peer downloading programs such as Bittorrent that run in the background Automatic software update services. These are legion, as every major software vendor has their own, so one can easily have Microsoft, Apple, Mozilla, Adobe, Google and others all trying to download updates in the background. Security software that downloads new signatures such as anti-virus, anti-malware, etc. Backup software and other software that "syncs" in the background to cloud services. For some numbers on how much network bandwidth gets sucked up by these non-web, non-email type services, check out this recent Wired article. Apparently web, email and chat all together are less than one quarter of the Internet traffic now. If the numbers in that article are correct, by filtering out all the other stuff I should be able to increase the usefulness of the WiFi four-fold. Now, in some situations I've been able to control access using security on the router to limit it to a very small group of people (typically the organizers of the meeting). But that's not always appropriate. At an upcoming meeting I would like to run the WiFi without security and let anyone use it, because it happens at the meeting location the 4G coverage in my town is particularly excellent. In a recent test I got 10 Megabits down at the meeting site. The "tell people to police themselves" solution mentioned at top is not appropriate because of (a) a largely non-technical audience and (b) the unintentional nature of much of the usage as described above. The "run a sniffer and filter as needed" solution is not useful because these meetings typically only last a couple of days, often only one day, and have a very small volunteer staff. I don't have a person to dedicate to network monitoring, and by the time we got the rules tweaked completely the meeting will be over. What I've Got First thing, I figured I would use OpenDNS's domain filtering rules to filter out whole classes of sites. A number of video and peer-to-peer sites can be wiped out using this. (Yes, I am aware that filtering via DNS technically leaves the services accessible - remember, these are largely non-technical users attending a 2 day meeting. It's enough). I figured I would start with these selections in OpenDNS's UI: I figure I will probably also block DNS (port 53) to anything other than the router itself, so that folks can't bypass my DNS configuration. A savvy user could get around this, because I'm not going to put a lot of elaborate filters on the firewall, but I don't care too much. Because these meetings don't last very long, its probably not going to be worth the trouble. This should cover the bulk of the non-web traffic, i.e. peer-to-peer and video if that Wired article is correct. Please advise if you think there are severe limitations to the OpenDNS approach. What I Need Note that OpenDNS focuses on things that are "objectionable" in some context or another. Video, music, radio and peer-to-peer all get covered. I still need to cover a number of perfectly reasonable things that we just want to block because they aren't needed in a meeting. Most of these are utilities that upload or download legit things in the background. Specifically, I'd like to know port numbers or DNS names to filter in order to effectively disable the following services: Microsoft automatic updates Apple automatic updates Adobe automatic updates Google automatic updates Other major software update services Major virus/malware/security signature updates Major background backup services Other services that run in the background and can eat lots of bandwidth I also would like any other suggestions you might have that would be applicable. Sorry to be so verbose, but I find it helps to be very, very clear on questions of this nature, and I already have half a solution with the OpenDNS thing.

  Read the article

• 5GHz vs 2.4GHz dual band router, max mbps

  - by Tallboy

  I've done a fair amount of reading before posting this but there are a few things still unclear. I just bought a Netgear WNDR3700 N600. I understand that 5GHz offers more channels, less interference because of more available channels, wont interfere with a microwave and so on, and also has a shorter range. Currently, my router is broadcasting both signals (for my iPhone on 2.4, and my computer on 5) But my question is What is the max speed of 5GHz in mbps? In the router settings, it allows me to set '300mbps', but I keep reading online that the max is 54. Is this true? I noticed when I set up the router the default for 2.4 was set to 300 and the default for 5 was set to 54, so I changed both to 300. Is this fine as well? I don't see why it wouldn't be maxed out for both by default. On the box it says max rate of 300+300 so I assume this is correct, but it's throttled down so the router isn't stressing in case you have something streaming media 24/7 and slowing the internet down too. What is the max range of 5GHz? my apt is 780 square feet, and the router is in the main living room.

  Read the article

• Planning home network

  - by gakhov

  I'm planning to setup my home network from scratch and want to ask professional opinions or tips. My home is connected to Internet with a cable connection (100 Mb/s). The devices I would like to connect are VoIP phone (RJ-45), TV (WiFi/LAN), 3 laptops (WiFi), 2 smartphones (WiFi), an iPad (WiFi), a Kindle (WiFi), a network printer and, probably, a home media storage (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, I need help to choose the best router (or combination of routers) to support stable connections for all these devices and minimize the total number of routers/adapters. I like how Cisco/Linksys devices were working for me in the past, so preferably (but not obligatorily) I want to setup network with their solutions. Any thoughts?

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >