Search Results

Search found 15439 results on 618 pages for 'wls configuration'.

Page 33/618 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• 24TB RAID 6 configuration

  - by Phil

  I am in charge of a new website in a niche industry that stores lots of data (10+ TB per client, growing to 2 or 3 clients soon). We are considering ordering about $5000 worth of 3TB drives (10 in a RAID 6 configuration and 10 for backup), which will give us approximately 24 TB of production storage. The data will be written once and remain unmodified for the lifetime of the website, so we only need to do a backup one time. I understand basic RAID theory, however I am not experienced with it. My question is, does this sound like a good configuration? What potential problems could this setup cause? Also, what is the best way to do a one-time backup? Have two RAID 6 arrays, one for offsite backup and one for production? Or should I backup the RAID 6 production array to a JBOD? EDIT: The data server is running Windows 2008 Server x64. EDIT 2: To reduce rebuild time, what would you think about using two RAID 5's instead of one RAID 6?

  Read the article

• Sun T5120: Memory issue with 8GB DIMMs, "Unsupported memory configuration"

  - by watain

  I'm trying to upgrade RAM in a Sun T5120 server, replacing 2GB (Sun P/N: 501-7953-01) with 8GB DIMMs (Sun P/N: 511-1262-01). When bringing up the host system, I get the following errors on the ILOM: -> show faulty Target | Property | Value --------------------+------------------------+--------------------------------- /SP/faultmgmt/0 | fru | /SYS/MB /SP/faultmgmt/0/ | timestamp | Dec 14 15:29:42 faults/0 | | /SP/faultmgmt/0/ | sp_detected_fault | /SYS/MB/CMP0/MCU3 Forced fail faults/0 | | (IBIST) /SP/faultmgmt/0/ | timestamp | Dec 14 15:29:28 faults/1 | | /SP/faultmgmt/0/ | sp_detected_fault | /SYS/MB/CMP0/MCU2 Forced fail faults/1 | | (IBIST) /SP/faultmgmt/0/ | timestamp | Dec 14 15:29:13 faults/2 | | /SP/faultmgmt/0/ | sp_detected_fault | /SYS/MB/CMP0/MCU1 Forced fail faults/2 | | (IBIST) /SP/faultmgmt/0/ | timestamp | Dec 14 15:28:59 faults/3 | | /SP/faultmgmt/0/ | sp_detected_fault | /SYS/MB/CMP0/MCU0 Forced fail faults/3 | | (IBIST) /SP/faultmgmt/1 | fru | /SYS /SP/faultmgmt/1/ | timestamp | Dec 14 15:29:42 faults/0 | | /SP/faultmgmt/1/ | sp_detected_fault | Dec 14 15:29:42 ERROR: faults/0 | | Unsupported memory | | configuration As you can see, the only error message I get is "Unsupported memory configuration". Note that I'm absolutely sure that I placed in the DIMMs in the correct slots. Might this issue be related to the Voltage of the DIMMs? Any suggestions on how to trouble-shoot this issue? This issue seems to be similar to the one explained at "Inserted disabled" while upgrading Sun Sparc t5120 memory. However the given link http://docs.sun.com/source/820-4445-10/chapter1.html seems to point to an inexistent page...

  Read the article

• Apahe configuration with virtual hosts and SSL on a local network

  - by Petah

  I'm trying to setup my local Apache configuration like so: http://localhost/ should serve ~/ http://development.somedomain.co.nz/ should serve ~/sites/development.somedomain.co.nz/ https://development.assldomain.co.nz/ should serve ~/sites/development.assldomain.co.nz/ I only want to allow connections from our local network (192.168.1.* range) and myself (127.0.0.1). I have setup my hosts file with: 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 development.somedomain.co.nz 127.0.0.1 development.assldomain.co.nz 127.0.0.1 development.anunuseddomain.co.nz My Apache configuration looks like: Listen 80 NameVirtualHost *:80 <VirtualHost development.somedomain.co.nz:80> ServerName development.somedomain.co.nz DocumentRoot "~/sites/development.somedomain.co.nz" DirectoryIndex index.php <Directory ~/sites/development.somedomain.co.nz> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost localhost:80> DocumentRoot "~/" ServerName localhost <Directory "~/"> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <IfModule mod_ssl.c> Listen *:443 NameVirtualHost *:443 AcceptMutex flock <VirtualHost development.assldomain.co.nz:443> ServerName development.assldomain.co.nz DocumentRoot "~/sites/development.assldomain.co.nz" DirectoryIndex index.php SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /Applications/XAMPP/etc/ssl.crt/server.crt SSLCertificateKeyFile /Applications/XAMPP/etc/ssl.key/server.key BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 <Directory ~/sites/development.assldomain.co.nz> SSLRequireSSL Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> </IfModule> http://development.somedomain.co.nz/ http://localhost/ and https://development.assldomain.co.nz/ work fine. The problem is when I request http://development.anunuseddomain.co.nz/ or http://development.assldomain.co.nz/ it responds with the same as http://development.somedomain.co.nz/ I want it to deny all requests that do not match a virtual host server name and all requests to a https host that are requested with http PS I'm running XAMPP on Mac OS X 10.5.8

  Read the article

• Mindtouch broke my Apache2 virtual host configuration.

  - by grenade

  I installed mindtouch using the instructions here and it seems to have broken my Virtual Host configuration. I have several domains running off the same apache instance and this was working fine but now all my domain names resolve to the virtualhost where mindtouch was installed. So mindtouch made all my domain names point to the new mindtouch instance. Grrr! I use debians default virtual host mechanisms (sites-enabled, etc). Does anyone know what apache directive mindtouch is using to ruin my vh setup? I've scoured all the conf files and there is nothing obvious in apache2.conf or httpd.conf that would cause the behaviour. Did it create a sym-link somewhere that I should destroy? I should add that I uninstalled the mindtouch packages already but apache persists in redirecting all domains to the first one mentioned in the sites-enabled folder. thini:~# apache2ctl -S [Wed Jan 05 13:39:11 2011] [warn] NameVirtualHost *:80 has no VirtualHosts VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:* www.openancestry.org (/etc/apache2/sites-enabled/openancestry.org:1) *:* www.pragmantra.com (/etc/apache2/sites-enabled/pragmantra.com:1) *:* services.pragmantra.com (/etc/apache2/sites-enabled/services.pragmantra.com:1) *:* www.subversionreports.com (/etc/apache2/sites-enabled/subversionreports.com:1) *:* www.thijssen.ch (/etc/apache2/sites-enabled/thijssen.ch:1) Syntax OK

  Read the article

• Configuration for httphandler in classic mode

  - by happyspider

  I have to install an httphandler that needs to run on classic mode. I have created an application on the iis that uses a classic apppool and put the handler assembly there. The vendor gave me a configuration in the deployment document that looks like this: <system.web> <globalization requestEncoding="iso-8859-1" responseEncoding="iso-8859-1" /> <httpModules> </httpModules> <httpHandlers> <add verb="*" path="*" type="ProductName.ProductName, ProductName" /> </httpHandlers> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <handlers> <add name="someUnspecificName" path="*" verb="*" modules="IsapiModule" scriptProcessor="C:\Windows\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" resourceType="Unspecified" requireAccess="None" preCondition="classicMode,runtimeVersionv2.0,bitness32" /> </handlers> </system.webServer> The error I get when requesting a URL on the application is a 404, so I guess the handle is not used at all. Does the configuration look ok for a 64bit system?

  Read the article

• Apache can't be restarted after changes to the configuration file

  - by Sharifhs

  Hello, I can't successfully configure the apache and php configuration files, can anybody help me in this way? Apache 2.2.16 (win32-x86-no_ssl.msi) was installed into “C:\Apache2.2 “location. Then PHP 5.3.3 (VC9 x86 Thread Safe) zip file was downloaded and extracted on “C:\php” location. From “C:\php” I renamed the “php.ini-development” file into “php.ini” “php.ini” file was opened with notepad, and modified as: doc_root = "C:\Apache2.2\htdocs" extension_dir = "C:\php\ext" The following lines were added to the Apache's configuration file “httpd.conf”: LoadModule php5_module "C:/php/php5apache2_2.dll" AddType application/x-httpd-php .php PHPIniDir "C:/php" N.B.: Thanks all for comments and answer, but I can't reply none your comments, I don't know why. May be I'm not privileged to put any comment as I'm new here (is it the case?)! That's why I'm to edit my post to reply you all. Tell me what can I do? @ jer.salamon: do you want me to post full httpd.conf file? It'll be longer then! @ davr: the server started first, but when I configured those files, its never started again @jer.salamon: did you mean keeping this way: doc_root = extension_dir = "ext" It not yet restared!

  Read the article

• Proxmox drbd configuration split brain [on hold]

  - by AudioDan

  I am planning a proxmox HA configuration with two Dell R710 machines (dual 6 core processors in each) with enterprise level drive raid arrays. I would be using DRBD with a quorum disk on a third machine. I would dedicate two 1GB nics on each server to the DRBD communications. We would have approximately 12 to 14 Virtual Machines running on this pair of servers. The proxmox manual recommends creating two DRBD resources - one for the Virtual Machines that normally run on ServerA and one for the Virtual Machines that normally run on ServerB. This is because of the Primary/Primary state in which this configuration runs. If both servers have VMs talking to the same DRBD resource and a split brain situation occurs, there is potential for data corruption that must be resolved. While I understand it would take more effort to create new virtual machines, can anybody foresee any potential problems with running a separate DRBD resource for each VM instead? Does anyone have experience running a setup that way and has it worked well? It seems to me that would allow more flexibility in moving machines back and forth.

  Read the article

• Centos iptables configuration for Wordpress and Gmail smtp

  - by Fabrizio

  Let me start off by saying that I'm a Centos newby, so all info, links and suggestions are very welcome! I recently set up a hosted server with Centos 6 and configured it as a webserver. The websites running on it are nothing special, just some low traffic projects. I tried to configure the server as default as possible, but I like it to be secure as well (no ftp, custom ssh port). Getting my Wordpress to run as desired, I'm running into some connection problems. 2 things are not working: installing plugins and updates through ssh2 (failed to connect to localhost:sshportnumber) sending emails from my site using the Gmail smtp (Failed to connect to server: Permission denied (13)) I have the feeling that these are both related to the iptables configuration, because I've tried everything else (I think). I tried opening up the firewall to accept traffic for ports 465 (gmail smtp) and ssh port (lets say this port is 8000), but both the issues remain. Ssh connections from the terminal are working fine though. After each change I tried implementing I restarted the iptables service. This is my iptables configuration (using vim): # Generated by iptables-save v1.4.7 on Sun Jun 1 13:20:20 2014 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 465 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 465 -j ACCEPT COMMIT # Completed on Sun Jun 1 13:20:20 2014 Are there any (obvious) issues with my iptables setup considering the above mentioned issues? Saying that the firewall is doing exactly nothing in this state is also an answer... And again, if you have any other suggestions for me to increase security (considering the basic things I do with this box), I would love hear it, also the obvious ones! Thanks!

  Read the article

• configuration issue with respect to .htaccess file on ubuntu

  - by Registered User

  I am building an application tshirtshop I have following configuration in /etc/apache2/sites-enabled/tshirtshop <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/tshirtshop <Directory /var/www/tshirtshop> Options Indexes FollowSymLinks AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> and following in .htaccess file in location /var/www/tshirtshop/.htaccess <IfModule mod_rewrite.c> # Enable mod_rewrite RewriteEngine On # Specify the folder in which the application resides. # Use / if the application is in the root. RewriteBase /tshirtshop #RewriteBase / # Rewrite to correct domain to avoid canonicalization problems # RewriteCond %{HTTP_HOST} !^www\.example\.com # RewriteRule ^(.*)$ http://www.example.com/$1 [R=301,L] # Rewrite URLs ending in /index.php or /index.html to / RewriteCond %{THE_REQUEST} ^GET\ .*/index\.(php|html?)\ HTTP RewriteRule ^(.*)index\.(php|html?)$ $1 [R=301,L] # Rewrite category pages RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2&Page=$3 [L] RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2 [L] # Rewrite department pages RewriteRule ^.*-d([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&Page=$2 [L] RewriteRule ^.*-d([0-9]+)/?$ index.php?DepartmentId=$1 [L] # Rewrite subpages of the home page RewriteRule ^page-([0-9]+)/?$ index.php?Page=$1 [L] # Rewrite product details pages RewriteRule ^.*-p([0-9]+)/?$ index.php?ProductId=$1 [L] </IfModule> the site is working on localhost and is working as if there is no .htaccess rule specified i.e. if I were to view a page as http://localhost/tshirtshop/nature-d2 then I get a 404 Error but if I view the same page as http://localhost/tshirtshop/index.php?DepartmentId=2 then I can view it. What is the mistake if any one can point out in above configuration, or else I need to check any thing else? sudo apache2ctl -M Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) reqtimeout_module (shared) rewrite_module (shared) setenvif_module (shared) status_module (shared) Syntax OK I am using Apache2 on Ubuntu 12.04

  Read the article

• rsync per-site configuration file?

  - by Scott

  I know how to configure a per-site entry for ssh, but is there any kind of a client configuration for rsync that allows per-site configuration options and aliases or similar shortcuts like the .ssh/config? I'm curious because I have a minimal ssh server installed on my android phone and I also have a minimal rsync tool on it as well. I'm getting tired of having to root login onto the phone and sym-link both tools to standard places the android OS looks for executables as the ssh server is bare bones and has a typical *bear multi-link binary for the basic unix commands (that does not include rsync) I end up having to include --rsync-path=/path/to/rsync/android/files/rsync every time I want to do any rsyncing of the files on my phone, but this path is always the same. I've gotten around it in the meantime with a glob approach in a shell script wrapper, but this sometimes limits the customization I can do with the rsync call. I'm just wondering if there is anything similar to the .ssh/config file where I can create an alias for my phone (e.g. 'android') where specifying rsync android:/mnt/sdcard will automatically assume --rsync-path=/blah/blah/blah --no-g --no-p --no-t etc. Tre`

  Read the article

• powershell vs GPO for installation, configuration, maintenance

  - by user52874

  My question is about using powershell scripts to install, configure, update and maintain Windows 7 Pro/Ent workstations in a 2008R2 domain, versus using GPO/ADMX/msi. Here's the situation: Because of a comedy of cumulative corporate bumpfuggery we suddenly found ourselves having to design, configure and deploy a full Windows Server 2008R2 and Windows 7 Pro/Enterprise on very short notice and delivery schedule. Of course, I'm not a windows expert by any means, and we're so understaffed that our buzzword bingo includes 'automate' and 'one-button' and 'it needs to Just Work'. (FWIW, I started with DEC, then on to solaris and cisco, then linux of various flavors with a smattering of BSD nowadays. I use Windows for email and to fill out forms). So we decided to bring in a contractor to do this for us. and they met the deadline. The system is up and mostly usable, and this is good. We would not have been able to do this. But it's the 'mostly' part that is proving to be the PIMA now, and I'm having to learn Microsoft stuff anyway until/if we can get a new contract with these guys for ongoing operations. Here's my question. The contractor used powershell almost exclusively for deployment, configuration and updating. My intensive reading over the last week leads me to think that the generally accepted practices for deployment, configuration and updating microsoft stuff uses elements of GPOs and ADMX templates, along with maybe some third party stuff like PolicyPak. Are there solid reasons that I've not found yet that powershell scripts would be preferred over the GPO methods? I'm going to discuss this with the contractor lead when he gets back from his vacation, and he'll be straight with me (nor do I think they set us up). But I can also see this might be a religious issue, so I would still like some background on this. Thoughts? or weblinks? Thanks!

  Read the article

• mod_wsgi -apache configuration file

  - by Kevin

  guys sorry I'm a newbie to this but I've been following the mod_wsgi configuration tutorial and it's very spotty. In my httpd.conf file I add the virtual host like so: 'Main' server configuration # The directives in this section set up the values used by the 'main' server, which responds to any requests that aren't handled by a definition. These values also provide defaults for any containers you may define later in the file. # All of these directives may appear inside containers, in which case these default settings will be overridden for the virtual host being defined. # ServerName wsgihost DocumentRoot "/Library/WebServer/Documents" <Directory "/Library/WebServer/Documents"> Order allow,deny Allow from all </Directory> WSGIScriptAlias /myapp /Users/KL/modwsgi/env/myapp.wsgi <Directory "/Users/KL/modwsgi/env"> <Files myapp.wsgi> Order allow,deny Allow from all </Files> </Directory> Now, when I also added in my local host the following: 127.0.1.1 wsgihost but I can't seem to connect. Am I doing something terribly wrong?

  Read the article

• nginx configuration file explained

  - by Chris Muench

  I have a few questions about this configuration file "default" in /etc/nginx/sites-enabled. It is shown below. server { root /usr/share/nginx/www; index index.html index.htm; # Make site accessible from http://localhost/ server_name localhost; location / { proxy_pass http://127.0.0.1:8080; } location /doc { root /usr/share; autoindex on; allow 127.0.0.1; deny all; } location /images { root /usr/share; autoindex off; } } There is no "Listen" directive, how does it know to default to 80 The server_name is localhost, how does another domain work? Why is the location directive embedded in the server directive? Does that mean these locations ONLY apply to this server? None of my configs have listen 80 default_server; how does nginx then pick what configuration to use?

  Read the article

• Avoiding configSections in .NET app.config files

  - by Chris Clark

  I'm looking for a way to avoid declaring my configuration section in the configSections inside the App.config file. Basically, I want to specify my configuration information just like I do for built-in .NET systems. For instance, when configuring WCF, I just put stuff in the <system.serviceModel>, I don't have to declare a section in the configSections up top. The same thing applies for <system.diagnostics> and many other namespaces. I know I could just load it up as an XML file and parse through it, but I'd prefer to stick with the pattern if possible. Moreover, looking at the WCF configuration with Reflector, I notice that it uses the same configuration subsystem (defined in System.Configuration). If you're wondering why this is important, it's because it's confusing our IT people. If it were self contained in one place, it would be much easier on them. I also realize I'll lose the ability to have multiple of the same section type, but that's not important in our case.

  Read the article

• How match 'other' applications to a tag in awesome-wm?

  - by Mnementh

  I use version 3.3.4 of awesome and it is fine. But I miss one thing I could do with an older version of awesome (without configuration via Lua): I could add a matcher with the regexp .* to add all windows without another tag to a specific tag: rule { name = ".*" tags = "9" } With that all applications I didn't made another rule for were added to tag 9. How can I do something similar with configuration in rc.lua?

  Read the article

• Used SQL Svr 2008 Config Manager to Set Service Account to Local System: What Did It Change?

  - by Frank Ramage

  Direct shot to foot moment... While setting-up individual non-admin accts for MSSQLSERVER services, I temporarily set Server service login to Local System account. I remembered later that: SQL Server Configuration Manager performs additional configuration such as setting permissions in the Windows Registry so that the new account can read the SQL Server settings. I want my Local System back . (Actually just restored to its original security profile) Any advice? Thanks!

  Read the article

• Specifying prerequisites for Puppet custom facts?

  - by larsks

  I have written a custom Puppet fact that requires the biosdevname tool to be installed. I'm not sure how to set things up correctly such that this tool will be installed before facter tries to instantiate the custom fact. Facts are loaded early on in the process, so I can't simply put a package { biosdevname: ensure => installed } in the manifest, since by the time Puppet gets this far the custom fact has already failed. I was curious if I could resolve this through Puppet's run stages. I tried: stage { pre: before => Stage[main] } class { biosdevname: stage => pre } And: class biosdevname { package { biosdevname: ensure => installed } } But this doesn't work...Puppet loads facts before entering the pre stage: info: Loading facts in physical_network_config ./physical_network_config.rb:33: command not found: biosdevname -i eth0 info: Applying configuration version '1320248045' notice: /Stage[pre]/Biosdevname/Package[biosdevname]/ensure: created Etc. Is there any way to make this work? EDIT: I should make it clear that I understand, given a suitable package declaration, that the fact will run correctly on subsequent runs. The difficulty here is that this is part of our initial configuration process. We're running Puppet out of kickstart and want the network configuration to be in place before the first reboot. It sounds like the only workable solution is to simply run Puppet twice during the initial system configuration, which will ensure that the necessary packages are in place. Also, for Zoredache: # This produces a fact called physical_network_config that describes # the number of NICs available on the motherboard, on PCI bus 1, and on # PCI bus 2. The fact value is of the form <x>-<y>-<z>, where <x> # is the number of embedded interfaces, <y> is the number of interfaces # on PCI bus 1, and <z> is the number of interfaces on PCI bus 2. em = 0 pci1 = 0 pci2 = 0 Dir['/sys/class/net/*'].each { |file| devname=File.basename(file) biosname=%x[biosdevname -i #{devname}] case when biosname.match('^pci1') pci1 += 1 when biosname.match('^pci2') pci2 += 1 when biosname.match('^em[0-9]') em += 1 end } Facter.add(:physical_network_config) do setcode do "#{em}-#{pci1}-#{pci2}" end end

  Read the article

• Configure APC for maximum hit rate

  - by Steven De Groote

  I'm currently running php5 with APC, the latter with default configuration. However after setting up munin to monitor APC, I'm surprised by the results: apc.shm_size: 30 apc.gc_ttl: 3600 apc.ttl: 0 Used: 14MB Request rate: 100 requests/second Fragmentation: 0 Hit ratio: 80% (dropping to 0 a few times per hour) So the obvious question: how can I adapt the configuration to achieve a higher hitrate. I find it very strange that the available memory is not fully used which the hitratio is still below what I would expect. Thank for any hints!

  Read the article

• how to optimize apache on web-server

  - by Prakash

  how can I optimize the server with following configuration. It takes too much time to load a page. IBM X3200 M3 Server - 1 Intel Xeon Processor with 4 GB Ram Below is my current configuration for apache: Start Servers: 5 (Default) Minimum Spare Servers: 10 Maximum Spare Servers: 20 Server Limit: 500 Max Clients: 500 Max Requests Per Child: 10000 (Default) Keep-Alive: On Keep-Alive Timeout: 5 Max Keep-Alive Requests: 100 Timeout: 200

  Read the article

• How to optimally configure memcache running on 16 cores 144G ram server?

  - by Ivko Maksimovic

  Memcache is the only important app running on the server Server has 16 cores and 144G RAM Memcache is given 135G Memcache runs at 32 threads Gigabit network, test shows at least 300Mbit/s availability on network port 600 connections 3000 requests per second Say that memcache (memory) usage is at 50% - it's definitely not full As we increase number of requests towards server, requests slow down (from 8ms to 100ms per request) but server load remains 0.00. We suspect this can be solved by adjusting configuration but we don't understand many of the configuration parameters (besides, maybe, the number of threads). Any ideas?

  Read the article

• Create a Self Signed Sertificate on WLS 10.3.5 Supporting SHA 256 Algorthim.

  - by adejuanc

  1) Set domain to call the keytool $. setDomainEnv.sh 2) Generate the key $ keytool -genkey -alias selfsignedcert -keyalg RSA -sigalg SHA256withRSA -keypass privatepassword -keystore identity.jks -storepass password -validity 365 What is your first and last name? [Unknown]: adejuan-desktop.cl.oracle.com What is the name of your organizational unit? [Unknown]: a What is the name of your organization? [Unknown]: e What is the name of your City or Locality? [Unknown]: i What is the name of your State or Province? [Unknown]: o What is the two-letter country code for this unit? [Unknown]: U Is CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U correct? [no]: yes 3) Export the root certificate $ keytool -export -alias selfsignedcert -sigalg SHA256withRSA -file root.cer -keystore identity.jks Enter keystore password: Certificate stored in file <root.cer> 4) Import the root certificate to the trust store $ keytool -import -alias selfsignedcert -sigalg SHA256withRSA -trustcacerts -file root.cer -keystore trust.jks Enter keystore password: Re-enter new password: Owner: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Issuer: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Serial number: 4f17459a Valid from: Wed Jan 16 15:33:22CLST 2012 until: Thu Jan 15 15:33:22 CLST 2013 Certificate fingerprints: MD5: 7F:08:FA:DE:CD:D5:C3:D3:83:ED:B8:4F:F2:DA:4E:A1 SHA1: 87:E4:7C:B8:D7:1A:90:53:FE:1B:70:B6:32:22:5B:83:29:81:53:4B Signature algorithm name: SHA256withRSA Version: 3 Trust this certificate? [no]: yes Certificate was added to keystore 5) To check the contents of the keystore keytool -v -list -keystore identity.jks Enter keystore password: ***************** WARNING WARNING WARNING ***************** * The integrity of the information stored in your keystore * * has NOT been verified! In order to verify its integrity, * * you must provide your keystore password. * ***************** WARNING WARNING WARNING ***************** Keystore type: JKS Keystore provider: SUN Your keystore contains 1 entry Alias name: selfsignedcert Creation date: Jan 18, 2012 Entry type: PrivateKeyEntry Certificate chain length: 1 Certificate[1]: Owner: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Issuer: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Serial number: 4f17459a Valid from: Wed Jan 16 15:42:16CLST 2012 until: Thu Jan 15 15:42:16 CLST 2013 Certificate fingerprints: MD5: 7F:08:FA:DE:CD:D5:C3:D3:83:ED:B8:4F:F2:DA:4E:A1 SHA1: 87:E4:7C:B8:D7:1A:90:53:FE:1B:70:B6:32:22:5B:83:29:81:53:4B Signature algorithm name: SHA256withRSA Version: 3 ******************************************* ******************************************* 6) In some cases, this parameter is needed in the server start up parameters. -Dweblogic.ssl.JSSEEnabled=true Otherwise, enable it from the Server configuration -> SSL -> Use JSSE checkbox.

  Read the article

• How to Write to a User.Config file through ConfigurationManager?

  - by Josh G

  I'm trying to persist user settings to a configuration file using ConfigurationManager. I want to scope these settings to the user only, because application changes can't be saved on Vista/Win 7 without admin privileges. This seems to get me the user's configuration, which appears to be saved here in Win 7 ([Drive]:\Users\[Username]\AppData\Local\[ApplicationName]\[AssemblyName][hash]\[Version\) Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.PerUserRoamingAndLocal); Whenever I try to save any changes at all to this config I get this exception: InnerException: System.InvalidOperationException Message="ConfigurationSection properties cannot be edited when locked." Source="System.Configuration" StackTrace: at System.Configuration.SectionInformation.VerifyIsEditable() at System.Configuration.MgmtConfigurationRecord.GetConfigDefinitionUpdates(Boolean requireUpdates, ConfigurationSaveMode saveMode, Boolean forceSaveAll, ConfigDefinitionUpdates& definitionUpdates, ArrayList& configSourceUpdates) I have tried adding a custom ConfigurationSection to this config. I have tried adding to the AppSettingsSection. Whenever I call config.Save() it throws the exception above. Any ideas? I tried using the ApplicationSettingsBase class through the Project-Settings designer, but it doesn't appear that you can save custom types with this. I want similar functionality with the ability to save custom types. Thanks.

  Read the article

• CallbackValidator called with empty string

  - by Paolo Tedesco

  I am writing a custom configuration section, and I would like to validate a configuration property with a callback, like in this example: using System; using System.Configuration; class CustomSection : ConfigurationSection { [ConfigurationProperty("stringValue", IsRequired = false)] [CallbackValidator(Type = typeof(CustomSection), CallbackMethodName = "ValidateString")] public string StringValue { get { return (string)this["stringValue"]; } set { this["stringValue"] = value; } } public static void ValidateString(object value) { if (string.IsNullOrEmpty((string)value)) { throw new ArgumentException("string must not be empty."); } } } class Program { static void Main(string[] args) { CustomSection cfg = (CustomSection)ConfigurationManager.GetSection("customSection"); Console.WriteLine(cfg.StringValue); } } And my App.config file looks like this: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="customSection" type="CustomSection, config-section"/> </configSections> <customSection stringValue="lorem ipsum"/> </configuration> My problem is that when the ValidateString function is called, the value parameter is always an empty string, and therefore the validation fails. If i just remove the validator, the string value is correctly initialized to the value in the configuration file. What am I missing?

  Read the article

• HAProxy error: Some configuration options require full privileges, so global.uid cannot be changed

  - by Athena Wisdom

  After adding the line to /etc/haproxy/haproxy.cfg as part of creating a transparent proxy, source 0.0.0.0 usesrc clientip restarting haproxy starts giving an error ~# service haproxy reload * Reloading haproxy haproxy [ALERT] 230/153724 (1140) : [/usr/sbin/haproxy.main()] Some configuration options require full privileges, so global.uid cannot be changed. I'm already running service haproxy reload as root. What else do we have to do? Thank you!

  Read the article

• Unable to load configuration from uwsgi

  - by James Willson

  Since yesterday I have been wrestling with this problem: unable to load configuration from uwsgi When I google it, nothing comes up. I am trying to run UWSGI under nginx with a very simple uwsgi.ini file. The file is being pointed to correctly. Can anyone please explain what this error is, and how I ca go about diagnosing it and fixing it. If there is any more information I can post to help then please just ask. Regards, James

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >