Search Results

Search found 13249 results on 530 pages for 'field guy'.

Page 330/530 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• Touchpad not working after login in Ubuntu

  - by Maria Mateescu

  At some point my touchpad stopped working on Lenovo x220 under Ubuntu 11.10, after login. I have found two possible solutions for that online, but neither of them work. First, gconftool-2 --set --type boolean /desktop/gnome/peripherals/touchpad/touchpad_enabled true and a second one, xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Off" 8 0 After looking more carefully into xinput I have realized that xinput list-props "SynPS/2 Synaptics TouchPad" outputs: Device Enabled (132): 0 This field seems to be stuck to zero, because trying to set it back to 1 by: xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Device Enabled" 8 1 doesn't seem to have any effect, e.g. I still have: Device Enabled (132): 0 Any ideas? Thank you!

  Read the article

• Using TrueCrypt (software encryption) with an SSD

  - by Shackrock

  I use full drive encryption (FDE) w/ TrueCrypt on my laptop. I have a 2nd gen I7 with AES instruction support, so honestly I can't even notice a speed change on the system with it on. My question, is for those who know about SSD's a lot. I previously (early 2011) read articles about how software encryption will negate the speed benefits that an SSD provides - because of the need for the SSD to send a delete command, then a write command, for every encrypted write - instead of just writing over data like a regular HDD would (or something like this...honestly I can't remember...ha!). Anyway, any improvements in this field? Is it pointless for me to grab an SSD if I'm using FDE? Thanks all.

  Read the article

• How to include a non-breaking hyphen in hyperlink text in Word 2010

  - by dunxd

  I want to include a URL in word document, both as text people can read, and a link they can click. The URL has a hyphen in it. I don't want the URL to get broken across lines. When I use a regular hyphen, the link works, but the text displayed gets broken. When I use a non-breaking hyphen (Ctrl+Shift+-) Word removes the hyphen from the link. When I try and manually edit the hyperlink, I can't add a non-breaking hyphen into the Text to display field using Ctrl+Shift+-. If I was writing this is HTML I could just do: <a href="http://www.my-link.com/">www.my&#8209;link.com</a> How do I get Word to do the equivalent?

  Read the article

• Which interface defines the physical address of a Dialup connection

  - by Debabratta

  I use dial up connection to connect to the Internet. When I type ipconfig/all in the command prompt it shows me a physical address along with description for the dial up connection. The description field shows WAN(PPP/SLIP)Interface. I want to know upon which this physical address depends? It depends on my computer or ISP. On changing my ISP, physical address for this dialup connection will change or remain same? Please give some idea.

  Read the article

• mysql -e option with variable data - Pass the variable value to insert sql statement in shell script

  - by Ahn

  The following shell script is not inserting the data to the table. How to pass the variable value to insert sql statement in a shell script. id=0 while true do id=`expr $id + 1`; mysql -u root -ptest --socket=/data/mysql1/mysql.sock -e 'insert into mytest1.mytable2(id,name) values (' $id ',"testing");' echo $id >> id.txt done I have modified the script as below and tried, and still having the issue id=0 while true do id=`expr $id + 1`; # mysql -u root -ptest --socket=/data/mysql1/mysql.sock1 -e 'insert into mytest1.mytable1(name) values ("amma");' mysql -u root -ptest --socket=/data/mysql1/mysql.sock -e 'insert into mytest1.mytable2(id,name) values ( $id ,"testing");' echo $id >> id.txt done error : ]$ ./insert ERROR 1054 (42S22) at line 1: Unknown column '$id' in 'field list'

  Read the article

• Why does Outlook 2010 give the message "Creating a new item from the selected items could take some time...are you sure you create a new item...?

  - by Matt

  I'm using Outlook 2010 with Exchange 2007. I am moving emails from my Deleted Items folder to a user-created folder. When I move a "low" number of messages, say a few hundred or less, the operation completes successfully. When I move a "large" number of messages (in this example it's over 800) I get the message shown in the screenshot below. If I click Yes, a new email is generated and has links to all the emails I selected in the Attachment field. When I cancel that email, not only have the messages not moved but they appear to be deleted entirely. What does the message mean and why does it get presented? Why does clicking Yes do the behavior I described above?

  Read the article

• Outlook mail/calendar items give errors after server migration

  - by Mike B

  Last Friday our Exchange server was migrated, by our external system administrator, to a new server, with a new server name. Since then we have problems with the calendar/mail items that were created/sent/received on the old server: Reply to mails get bounced if we use auto complete in the To field. If we cancel auto complete and manually enter the (same) e-mail address then there's no problem. Our system administrator says this is because auto complete fills in the old server name (???). Calendar items created on the old server cannot be edited (without an error) and must be recreated if we want to change them. Our system administrator says these problems are normal with a server migration. I cannot believe this. There must be a better way. Am I right?

  Read the article

• Bad password when logging in via Remote Desktop

  - by Shiraz Bhaiji

  I have just setup a windows 2003 server running in hyper-V. When I log in via Hyper-V it works fine. When I try to login via remote desktop I get a bad user name or password error. I have: Disabled the firewall Enabled remote connections Before I did the above I did not get to the login screen. I can ping the ip address of the image. I am trying to login as Administrator. Anyone have an idea about how to fix this? Edit I have now managed to fix this by changing the password to something without special characters. Strange thing is the I could not see any problems with the passord, had tried typing it into the user name field to check it.

  Read the article

• D-link Local wireless

  - by Filippo

  I created a wireless network inside a D-Link DIR-301 connected to a Mac, What I want is that every device to connect to this network if the browser automatically opens instead of the default homepage, it redirects to my website already set in the localhost of the machine which also has the router attached. I'd also like to see that instead of the IP to connect to the site, there will be a "fake" link. What do you advise me? how can I proceed? I state that I am a bit novice in this field, being more a web programmer.

  Read the article

• Server installation logging / logbook / diary?

  - by The MYYN

  Are there some ways field-tested ways to keep a kind of logbook for a server? Including: software installations (and de-installations) custom configurations (e.g. of a webserver, ssh daemon, etc.) personal notes The big picture. I am preparing a server and would like to extensively document the state and how it was established over time, so that a new person can easily see, what's going on and why. The setup is not too complicated, but I would like to do it anyway. I once used something like Maintain /etc with mercurial on Debian and it was nice, but I am looking for a little more flexible solution. Addendum: So I am interested in logging and documentation first. In an ideal world however, I would like to have a command, which in a few steps would take me from a bare newly installed unix system to a functional environment with all the components setup and in place by the means of, say an 'executable' log. But that would be very ideal, I imagine.

  Read the article

• Very simple video editor.

  - by Jonathan

  Hi First of all, I must to say that I don't know anything about video editing. I'm a total noob in this field. I need to make a screencast. Actually, I have made the desktop recording and I have some shorts videos in mp4 format to work with it. Thats what I need: Cut some fragments of the videos Join the selected portions into a big video Make some transicions in the cutting points (A simple fade will do the job) Put some text in the bottom of the videos during a few seconds making explanations Adding fragments of sound from a mp3/wav record Thats all... Which "very simple" video editor could I use? Thanks!

  Read the article

• User sees all Sharepoint document as being from 1938

  - by Ulys

  Hello, I currently have a problem I was unable to solve concerning Sharepoint. One of our user is seeing every file on Sharepoint as being from around 1938. The Created and Last Modified field are affected. When the user saves a file on his computer, the date is correct. If I log on his computer, the date are fine. If he log on my computer, the date are wrong once again, so it is linked to its Sharepoint account. The day and month are wrong to, but files uploaded 3 days apart are still 3 days apart for him. I don't see how anything could affect a date like that... Any help would be appreciated. Thanks, PS: Destroying his account and give him a new one is not a solution for now. He has been in this company for a long time and he has a lot of rights inherited from Sharepoint 2003 that are complicated to create.

  Read the article

• How to install RAID drivers on already installed Windows 7?

  - by happysencha

  64-bit Windows 7 Ultimate 6GB RAM Intel i7 920 Intel X25-M SSD 80GB 2,5" Club 3D Radeon HD5750 GA-EX58-UD4P Motherboard I've been running fine with Windows 7 installed on the SSD. I wanted to create an mirrored Raid-1 setup for backups using two hard disks, so I ordered two Samsung HD203WI. This motherboard supports two different RAID controllers, the Intel's ICH10R and Gigabyte's SATA2 SATA controller. There are 6 SATA ports behind the ICH10R and 2 SATA ports for the Gigabyte controller. I googled around and seemed that the ICH10R is a better choice and since then I've been trying to make it work. When I activate the [RAID] mode from BIOS, the Windows 7 gives BSOD exactly as described by this guy: "Windows 7 will start to boot, it gets to the screen where there are 4 colors coming together and it blue screens and restarts no matter what I do." First thing I did: turned off the RAID and booted to Windows and tried to install the SATA RAID drivers from Gigabyte. I launch the driver installation program and it gives "This computer does not meet the minimum requirements for installing the software" error. I then tried Intel's Rapid Storage Technology drivers (which apparently is the same as the one offered at Gigabyte's site), but it resulted in exactly the same error. I then detached the new Samsung hard disks from the SATA ports, but left the [RAID] enabled in BIOS. To my surprise, it still BSOD'd, so at this point I knew it is an OS/driver issue. Also, I tried with the Gigabyte's RAID enabled (while the ICH10R RAID disabled) and it booted just fine. So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed." So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks. I mean why would I need to re-install operating system to add RAID setup?

  Read the article

• How (much) is virtualization used today?

  - by BLAKE

  I know that where I have worked, I have pushed alot for virtualizing our servers. I think that it is much easier to implement and maintain than physical servers. I have been using Microsoft's Virtual Server 2005 R2 since it was released. Right now at my workplace we have 12 VMHosts that hold about 55 VMs. We have 6 other servers that we have been unable to convert to VMs. I want to know how other people in our field view virtualization. I know that I have had developers dislike the notion of VMs claiming major performance hits. What do other Sys Admins think about virtualized servers?

  Read the article

• Need help troubleshooting highly variable ping times

  - by Elliot.Bradshaw

  I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

  Read the article

• SQL update table from another table

  - by LtDan

  Using SQL in Access, trying to "Update" a table, with the user name, from another table. The 3rd line below (SQLnm2...) says error-2465 cant find field '|'. I've tried changing the expression many ways but no success. Any assistance would be greatly appreciated. Dim SQLnm As String Dim SQLnm2 As String SQLnm2 = SQLnm2 & "', '" & [Employees]![NBK] & "');" SQLnm = " Update tbl_DateTracking SET NBK = " SQLnm = SQLnm & "'" & SQLnm2 & "' WHERE " SQLnm = SQLnm & "CaseId = '" & CaseId & "' AND OCC_Scenario = '" & OCC_Scenario & "';" DoCmd.RunSQL SQLnm

  Read the article

• VPN server on Windows Server 2008 for a small office

  - by cmbrnt

  I'm going to refurbish the IT-infrastructure for a small organization with one single office, and I'm not sure what VPN server to use. In your opinion, would the built-in Windows Server 2008 VPN server suffice or are there any specific problems with it as opposed to, for example, OpenVPN? I'd rather run a Windows native VPN server, but if there are few (preferably free) good alternatives, I could install VMware ESXi and virtualize both Windows and an OpenVPN-server. By the way, because of a low budget this office runs a solution with only one physical server. Any advice would be great to help me grasp this field of which I'm quite a novice. Thank you!

  Read the article

• Recovering damaged external hard disk by installing internally

  - by nfarshchi

  I had a 1TB Western Digital (My book series) 3.5" USB3. One day, the SATA to USB3 converter board was damaged and has not worked since. I decided to open the cover and use the HDD as an internal HDD. When I attached the HDD to my PC and booted up in Windows, it asked me which type of ????? I want to use "MBR or GBR" (I dont remember the exact question) I chose MBR and Windows gave me a 1TB empty Hard drive. I tried to recover with recover my files and some other recovery programs but no success. Some one told me that you should choosed GBR instead of MBR . How can I do that now? Another guy told me that the SATA to USB3 converter board is coded to save data on HDD and you can not use them internally without losing data, and I should find another SATA to USB3 board (exact same). It is impossible to find because they are not produced any more. Please help me to find a solution to bring back my data. UPDATE I have 1TB WD "Mybook" USB 3. the board that convert sata to usb3 was damaged. so when the HDD was in the box computer did not recognize it. I opened the box and remove HDD to use it internal. after connecting to my PC windows showed me one massage that I had two choice MBR or GPT I choosed MBR one and windows gave me 1TB empty new volume. I tried many recovery software to recover my data but no success. I brought it to one expert recovery company and they told me the converter board (SATA to USB3) make some encryption on data and with out that board you cannot recover any thing. so I bought another empty WD box and put the HDD inside but even after that also there is no file. I tried to recover again in this state but no success. so I have some unanswered question. does this converted boards make any password or encryption? if yes how can I solve it? does using many recovery programs affected my data? any suggestion or solution for bring back my data? I had use recovery programs such as : recover my files , EaseUS data recovery, easy recovery, test disk, Ontrack easy recovery . Note: when I was using test disk it asked me to choose which partition table I want to use. as it was I choose NTFS, does this made any change on data?

  Read the article

• Firefox 11.0 Right-Click Dropdown Menu (and Menu Options at Window Top) Flickering - Potential Bug?

  - by nicorellius

  About a week ago my Windows 7 machine starting exhibiting odd Firefox behavior. When I right click on something the drop-down menu flickers and when the mouse is hovering over a field, I can't really see it. This same behavior happens in other ways too, like in the top File, Edit , View, etc menus. I click them and they flicker, when I hover over them, and then they get obscured when I hover over the one I want. I did some research and didn't really find anything. Some people found similar behavior in applications THEY were building. But mine is a global problem. Happens on all sites, as far as I can tell. This is why I suspect it's my Firefox installation. I thought about reinstalling, but if there was another option, I'd like to explore that too. The behavior is not really capture-able, so I don't have anything except words to describe it. Sorry ;-( Thanks.

  Read the article

• Ditto (clipboard manager): can't set shortcut of Win+<num>. Get “Error Registering Position 1”

  - by Jeff Kang

  Somone made a Youtube video on Ditto, and that person uses Win+Num to paste items from the list. He put a screenshot of his settings on Google Plus: When I try to do the same, which is to put “1” in the text field of Position 1, and check the “Win” box to add the Windows key as the sole modifier for the shortcut, which will be Win + 1, I get an error in that says “Error Registering Position 1” in a window titled CP_Main: Could it be because Win+Num conflicts with the natural Win+Num shortcut (starts the application pinned to the taskbar in that position, or switches to that program) of Windows 7? Thanks.

  Read the article

• Firewall blocks FTP PASV response

  - by harper

  I have an FTP server that supports passive server mode (using PASV command). This works fine with Windows XP. When I want to access this server from Windows Vista or Windows 7 with firewall enabled I experience an immediate connection shutdown. A reset packet is sent to the server, and the socket is signaled that the server has reset the connection (which is not true). The problem disappears when the firewall is disabled. Connections to other FTP servers work correctly. The difference is that the server's response to PASV does not enclose the address field with parentheses. This is legal as documented in RFC-959 and RFC-1132. How can I configure the firewall to stop this bad behavior?

  Read the article

• Word 2007 cell formatting

  - by Michelle Grant

  I have created a form template in Word 2007 which include various fields. Some of the fields are to show time (i.e. 15:47:32). I've set the text field properties as "Date" HH:mm:ss. The trouble arises when the form is them completed. If I input 15.47.32 it correctly reverts to 15:47:32 but if I input 12.12.31 it reverts to 00:00:00. This also happens if I input 12:12:32. Please help as I've looked at this all afternoon now and it's driving me insane

  Read the article

• Comparing two specific properties of a CSV using Compare-Object isn't giving the expected results

  - by MDMarra

  I have a list of users from two separate domains. These lists are in CSV format and I only care about the SAMAccountName, which is a field in these CSVs. The code that I'm working with is currently: $domain1 = Import-CSV C:\Scripts\Temp\domain1.xxx.org.csv | Select-Object SAMAccountName $domain2 = Import-CSV C:\Scripts\Temp\domain2.xxx.org.csv | Select-Object SAMAccountName Compare-Object ($domain1) ($domain2) This is returning only a handful of results (which aren't accurate) in this format: @{samaccountname=SomeUser} => Obviously, Compare-Object isn't evaluating the objects as strings. How do I make this work?

  Read the article

• Disable word completion dialog when pressing escape in Safari

  - by Peter

  Behavior: Load Safari 5.0 on mac. Press command+f to search for some text. Type something, and find it on the page. Hit esc to cancel the search. Irritatingly, get word completion menu rather than canceling. Is there any way to make esc cancel the search, like it used to with Safari 4.0, instead of pulling up a word completion dialog? It's very annoying. Failing that, what's the best way to cancel the search with the keyboard? Note: this also happens in any text field, the search box, the location bar etc.

  Read the article

• Custom CSV (.csv) filter for OpenOffice.org or LibreOffice?

  - by anon

  Is it possible to create a some kind of 'custom CSV filter' for OpenOffice.org or LibreOffice spreadsheet program. What I need is to have the program to use predefined CSV settings for loading and saving when I open, let's say file named 'somefile.myext'. Also I would need the loaded data to be placed in a prestyled spreadsheet. In this particular case, I would need the CSV settings to have tab as a field delimiter and no text delimiter at all. Prestyled spreadsheet would contain Blue gray coloring for every odd row (achieved with conditional formatting formula), some font styling and probably some column width definitions.

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >