Search Results

Search found 17686 results on 708 pages for 'high level'.

Page 330/708 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• ASA 5505 stops local internet when connected to VPN

  - by g18c

  Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

  Read the article

• Wi-Fi Stick with ZD1211 chip refuses to work on Ubuntu >8.10. No clue.

  - by Benjamin Maus

  I have a machine running Ubuntu 9.10 (Karmic *x86_64*). Everything is running smooth so far, except for the Wi-Fi USB Stick. The same device worked perfectly in 8.10. The wireless device is a GW-US54GXS using the Zydas Zd1211 chipset. Dmesg output after plugging in: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' [ 196.304209] zd1211rw 2-1:1.0: phy0 [ 196.304227] usbcore: registered new interface driver zd1211rw [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Syslog output: Nov 5 11:20:24 somesystem kernel: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' Nov 5 11:20:24 kierkegaard NetworkManager: <info> Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/ieee80211/phy0/rfkill0) (driver <unknown>) Nov 5 11:20:24 somesystem kernel: [ 196.304209] zd1211rw 2-1:1.0: phy0 Nov 5 11:20:24 somesystem kernel: [ 196.304227] usbcore: registered new interface driver zd1211rw Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'zd1211rw') Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2 Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): now managed Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2) Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): bringing up device. Nov 5 11:20:24 somesystem kernel: [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:24 somesystem kernel: [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 Nov 5 11:20:24 somesystem kernel: [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- Nov 5 11:20:24 somesystem NetworkManager: <WARN> nm_device_hw_bring_up(): (wlan0): device not up after timeout! Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): deactivating device (reason: 2). Nov 5 11:20:24 somesystem kernel: [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:29 somesystem wpa_supplicant[978]: Could not set interface 'wlan0' UP Nov 5 11:20:29 somesystem wpa_supplicant[978]: Failed to initialize driver interface Nov 5 11:20:29 somesystem NetworkManager: <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. Gnome tells me in the network menu that the device was "not ready". It appears in iwconfig but not in ifconfig. The same symptoms appear when I boot from the live CD. How can I solve this dilemma?

  Read the article

• Outlook Web Access, reverse proxy and browser

  - by M'vy

  Hi SF'ers! We recently moved an exchange server behind a reverse proxy due to the loss of a public IP. I've managed to configure the reverse proxy (httpd proxy_http). But there is a problem for the SSL configuration. When accessing the OWA interface with Firefox, all is ok and working. When accessing with MSIE or Chrome, they do not retrieve the good SSL Certificate. I think this is due to the multiples virtual host for httpd. Is there a workaround to make sure MSIE/Chrome request the certificate for the good domain name like FF does? Already tested with the SSL virtual host : SetEnvIf User-Agent ".*MSIE.*" value BrowserMSIE Header unset WWW-Authenticate Header add WWW-Authenticate "Basic realm=exchange.domain.com" A: ProxyPreserveHost On also: BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 Or: SetEnvIf User-Agent ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 And lots of ProxyPassand ProxyReversePath on /exchweb /exchange /public etc... And it still don't seem to work. Any clue? Thanks. Edit 1: Precision of versions # openssl version OpenSSL 0.9.8k-fips 25 Mar 2009 /usr/sbin/httpd -v Server version: Apache/2.2.11 (Unix) Server built: Mar 17 2009 09:15:10 Browser versions : MSIE : 8.0.6001 Opera: Version 11.01 Revision 1190 Firefox: 3.6.15 Chrome: 10.0.648.151 Operating System: Windows Vista 32bits. They are all SNI compliant, I've tested them this afternoon https://sni.velox.ch/ You're right Shane Madden, I have multiple sites on the same public IP (and same port as well). The server itself is just a reverse proxy, that rewrite addresses to internal servers. The default host is a dev site, configure with the certificate that does not match the OWA (of course... would have been to easy) <VirtualHost *:443> ServerName dev2.domain.com ServerAdmin [email protected] CustomLog "| /usr/sbin/rotatelogs /var/log/httpd/access-%y%m%d.log 86400" combined ErrorLog "| /usr/sbin/rotatelogs /var/log/httpd/error-%y%m%d.log 86400" LogLevel warn RewriteEngine on SetEnvIfNoCase X-Forwarded-For .+ proxy=yes SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL:+SSLv3 SSLCertificateFile /etc/httpd/ssl/domain.com.crt SSLCertificateKeyFile /etc/httpd/ssl/domain.com.key RewriteCond %{HTTP_HOST} dev2\.domain\.com RewriteRule ^/(.*)$ http://dev2.domain.com/$1 [L,P] </VirtualHost> The certificate of domain is a *.domain.com The second vHost is : <VirtualHost *:443> ServerName exchange.domain2.com ServerAdmin [email protected] CustomLog "| /usr/sbin/rotatelogs /var/log/httpd/exchange/access-%y%m%d.log 86400" combined ErrorLog "| /usr/sbin/rotatelogs /var/log/httpd/exchange/error-%y%m%d.log 86400" LogLevel warn SSLEngine on SSLProxyEngine On SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL:+SSLv3 SSLCertificateFile /etc/httpd/ssl/exchange.pem SSLCertificateKeyFile /etc/httpd/ssl/exchange.key RewriteEngine on SetEnvIfNoCase X-Forwarded-For .+ proxy=yes RewriteCond %{HTTP_HOST} exchange\.domain2\.com RewriteRule ^/(.*)$ https://exchange.domain2.com/$1 [L,P] </VirtualHost> and it's certificate is exchange.domain2.com only. I presume the SNI is somewhere not activated on my server. The versions of openssl and apache seams to be ok for the SNI support. The only thing I do not know is if httpd has been compile with the good options. (I assume it's a fedora packet).

  Read the article

• Samba with Active Directory - shares are readonly, NT_STATUS_MEDIA_WRITE_PROTECTED

  - by froh42

  I've set a samba server that seems to work, all shares are seemingly exported as readonly, however. The machine is called "lx". When I'm on lx I can run the following command: froh@lx:~$ smbclient //lx/export -UAdministrator Enter Administrator's password: Domain=[CUSTOMER] OS=[Unix] Server=[Samba 3.5.4] smb: \> mkdir wrzlbrmpf NT_STATUS_MEDIA_WRITE_PROTECTED making remote directory \wrzlbrmpf smb: \> ls . D 0 Fri Dec 3 19:04:20 2010 .. D 0 Sun Nov 28 01:32:37 2010 zork D 0 Fri Dec 3 18:53:33 2010 bar D 0 Sun Nov 28 23:52:43 2010 ork 1 Fri Dec 3 18:53:02 2010 foo 1 Sun Nov 28 23:52:41 2010 gaga D 0 Fri Dec 3 19:04:20 2010 How can I troubleshoot this? What I did: First I set up a fresh install of Ubuntu 10.10 x64. Second I got kerberos working with the following krb5.conf file: [libdefaults] ticket_lifetime = 24000 clock_skew = 300 default_realm = CUSTOMER.LOCAL [realms] CUSTOMER.LOCAL = { kdc = SB4.customer.local:88 admin_server = SB4.customer.local:464 default_domain = CUSTOMER.LOCAL } [domain_realm] .customer.local = CUSTOMER.LOCAL customer.local = CUSTOMER.LOCAL #[login] # krb4_convert = true # krb4_get_tickets = false I also added winbind to group, passwd and shadow in nsswitch.conf. Seemingly Kerberos works: root@lx:~# net ads testjoin Join is OK root@lx:~# wbinfo -a 'Administrator%MYSECRETPASSWORD' plaintext password authentication succeeded challenge/response password authentication succeeded wbinfo -u and wbinfo -g also spit out a list of users and a list of groups respectiveley. I noted that domain accounts did NOT include a domain and they are in german (as on the SBS 2003 that is the domain server). So I get a "Domänenbenutzer" in wbinfo -u's output not a "CUSTOMER+Domain User" or something similar. I'm not sure anymore what I did to the PAM configuration, but here is what I currently have: root@lx:/etc/pam.d# cat samba @include common-auth @include common-account @include common-session-noninteractive root@lx:/etc/pam.d# grep -ve '^#' common-auth auth [success=3 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=2 default=ignore] pam_unix.so nullok_secure try_first_pass auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass auth requisite pam_deny.so auth required pam_permit.so root@lx:/etc/pam.d# grep -ve '^#' common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 new_authtok_reqd=done default=ignore] pam_winbind.so account requisite pam_deny.so account required pam_permit.so account required pam_krb5.so minimum_uid=1000 root@lx:/etc/pam.d# grep -ve '^#' common-session-noninteractive session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so session optional pam_winbind.so At some point I joined the linux box into the AD domain. After (manually) creating a home directory on the linux box I can log in using the Adminstrator user with the password taken from AD. Now I run samba with the following setup: [global] netbios name = LX realm = CUSTOMER.LOCAL workgroup = CUSTOMER security = ADS encrypt passwords = yes password server = 192.168.20.244 #IP des Domain Controllers os level = 0 socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = Yes winbind enum groups = Yes preferred master = no winbind separator = + dns proxy = no wins proxy = no # client NTLMv2 auth = Yes log level = 2 logfile = /var/log/samba/log.smbd.%U template homedir = /home/%U template shell = /bin/bash [export] path = /mnt/sdc1/export read only = No public = Yes Currently I don't care whether export is exported to everyone or just one user, I want to see somebody WRITING to that directory before I start fiddling with the authentication settings. (Who may access it). As mentioned, accessing the share from smbclient results in this NT_STATUS_MEDIA_WRITE_PROTECTED . Accessing it from windows shows ACLs that look correct (The user may write) - but it does not work, I can only read files not write. The directory to be exported looks like this: root@lx:/etc/pam.d# ls -ld /mnt/ drwxr-xr-x 5 root root 4096 2010-11-28 01:29 /mnt/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/ drwxr-xr-x 4 froh froh 4096 2010-11-28 01:32 /mnt/sdc1/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/export/ drwxrwxrwx+ 5 administrator domänen-admins 4096 2010-12-03 19:04 /mnt/sdc1/export/ root@lx:/etc/pam.d# getfacl /mnt/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/ # owner: root # group: root user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/ # owner: froh # group: froh user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/export/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/export/ # owner: administrator # group: domänen-admins user::rwx group::rwx group:domänen-admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:domänen-admins:rwx default:mask::rwx default:other::rwx My, oh my what am I overlooking? What am I to blind to see?

  Read the article

• Samba with Active Directory - shares are readonly, NT_STATUS_MEDIA_WRITE_PROTECTED

  - by froh42

  I've set a samba server that seems to work, all shares are seemingly exported as readonly, however. The machine is called "lx". When I'm on lx I can run the following command: froh@lx:~$ smbclient //lx/export -UAdministrator Enter Administrator's password: Domain=[CUSTOMER] OS=[Unix] Server=[Samba 3.5.4] smb: \> mkdir wrzlbrmpf NT_STATUS_MEDIA_WRITE_PROTECTED making remote directory \wrzlbrmpf smb: \> ls . D 0 Fri Dec 3 19:04:20 2010 .. D 0 Sun Nov 28 01:32:37 2010 zork D 0 Fri Dec 3 18:53:33 2010 bar D 0 Sun Nov 28 23:52:43 2010 ork 1 Fri Dec 3 18:53:02 2010 foo 1 Sun Nov 28 23:52:41 2010 gaga D 0 Fri Dec 3 19:04:20 2010 How can I troubleshoot this? What I did: First I set up a fresh install of Ubuntu 10.10 x64. Second I got kerberos working with the following krb5.conf file: [libdefaults] ticket_lifetime = 24000 clock_skew = 300 default_realm = CUSTOMER.LOCAL [realms] CUSTOMER.LOCAL = { kdc = SB4.customer.local:88 admin_server = SB4.customer.local:464 default_domain = CUSTOMER.LOCAL } [domain_realm] .customer.local = CUSTOMER.LOCAL customer.local = CUSTOMER.LOCAL #[login] # krb4_convert = true # krb4_get_tickets = false I also added winbind to group, passwd and shadow in nsswitch.conf. Seemingly Kerberos works: root@lx:~# net ads testjoin Join is OK root@lx:~# wbinfo -a 'Administrator%MYSECRETPASSWORD' plaintext password authentication succeeded challenge/response password authentication succeeded wbinfo -u and wbinfo -g also spit out a list of users and a list of groups respectiveley. I noted that domain accounts did NOT include a domain and they are in german (as on the SBS 2003 that is the domain server). So I get a "Domänenbenutzer" in wbinfo -u's output not a "CUSTOMER+Domain User" or something similar. I'm not sure anymore what I did to the PAM configuration, but here is what I currently have: root@lx:/etc/pam.d# cat samba @include common-auth @include common-account @include common-session-noninteractive root@lx:/etc/pam.d# grep -ve '^#' common-auth auth [success=3 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=2 default=ignore] pam_unix.so nullok_secure try_first_pass auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass auth requisite pam_deny.so auth required pam_permit.so root@lx:/etc/pam.d# grep -ve '^#' common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 new_authtok_reqd=done default=ignore] pam_winbind.so account requisite pam_deny.so account required pam_permit.so account required pam_krb5.so minimum_uid=1000 root@lx:/etc/pam.d# grep -ve '^#' common-session-noninteractive session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so session optional pam_winbind.so At some point I joined the linux box into the AD domain. After (manually) creating a home directory on the linux box I can log in using the Adminstrator user with the password taken from AD. Now I run samba with the following setup: [global] netbios name = LX realm = CUSTOMER.LOCAL workgroup = CUSTOMER security = ADS encrypt passwords = yes password server = 192.168.20.244 #IP des Domain Controllers os level = 0 socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = Yes winbind enum groups = Yes preferred master = no winbind separator = + dns proxy = no wins proxy = no # client NTLMv2 auth = Yes log level = 2 logfile = /var/log/samba/log.smbd.%U template homedir = /home/%U template shell = /bin/bash [export] path = /mnt/sdc1/export read only = No public = Yes Currently I don't care whether export is exported to everyone or just one user, I want to see somebody WRITING to that directory before I start fiddling with the authentication settings. (Who may access it). As mentioned, accessing the share from smbclient results in this NT_STATUS_MEDIA_WRITE_PROTECTED . Accessing it from windows shows ACLs that look correct (The user may write) - but it does not work, I can only read files not write. The directory to be exported looks like this: root@lx:/etc/pam.d# ls -ld /mnt/ drwxr-xr-x 5 root root 4096 2010-11-28 01:29 /mnt/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/ drwxr-xr-x 4 froh froh 4096 2010-11-28 01:32 /mnt/sdc1/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/export/ drwxrwxrwx+ 5 administrator domänen-admins 4096 2010-12-03 19:04 /mnt/sdc1/export/ root@lx:/etc/pam.d# getfacl /mnt/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/ # owner: root # group: root user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/ # owner: froh # group: froh user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/export/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/export/ # owner: administrator # group: domänen-admins user::rwx group::rwx group:domänen-admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:domänen-admins:rwx default:mask::rwx default:other::rwx My, oh my what am I overlooking? What am I to blind to see?

  Read the article

• AMD Catalyst 13.9 installation failure

  - by Simon Verbeke

  Earlier today I installed Windows 8.1, and when I wanted to go into Catalyst Control Center, I noticed some odd error of CCC not being able to display options. I then figured I needed a driver update, so I downloaded the latest drivers, version 13.9, and tried to install them. While it was trying to install the display drivers, I got a blue screen. Tried again and got the same. Then I used an uninstall tool from AMD to remove all traces of my old drivers and tried to install the new drivers. Again, a blue screen. This is all I could think of to try. Would anyone know some other things I can try? EDIT: thought I might want to include the log entry for the crash: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-10-19T20:59:25.000000000Z" /> <EventRecordID>26587</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>Simon-PC</Computer> <Security /> </System> - <EventData> <Data Name="param1">0x0000007e (0xffffffffc0000005, 0xfffff80002a86dca, 0xffffd00025f250e8, 0xffffd00025f248f0)</Data> <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data> <Data Name="param3">101913-8953-01</Data> </EventData> </Event> Another edit: As it turns out, the graphics card isn't showing up any more in the device manager. But as far as I can tell, it is still working (the fans are spinning and my screen is plugged into that graphics card). This is solved. it appears that my graphics card is now running with a default windows driver. I also tried the forced method mentioned here: AMD Graphics Drivers won't install properly . But I still get a BSOD. Third edit: Slight succes! Managed to install version 13.4. Everything appears to be working fine now. I think I'm just going to skip version 13.9.

  Read the article

• got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

  - by vinlata

  Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

  Read the article

• Mod_Rewrite w Apache mod_jrun22.so & ColdFusion 9 on cPanel

  - by Eddie B

  How can I utilize mod_rewrite at either the httpd.conf level or per-directory level when mod_jrun22 seems to have short-stopped the rewrite process for ColdFusion pages? I have a ColdFusion 9 based site running on Centos 5.8 w cPanel. cPanel uses EasyApache 3 to manage virtual host containers and as such the conf for mod_jrun22.so, /usr/local/apache/conf/includes/pre_main_global.conf, is loaded prior to the main httpd.conf with the domain specific rules for the container. My assertion is that .cfm pages are failing to be rewritten due to the mod_jk22.so module having priority in the directive chain. To note, I also have a WordPress blog in the site where the rewrites appear to be working fine. For example the following code to remove the index file works fine for php and fails with cfm ... .htaccess under /blog/ : This works Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase /blog/ RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /blog/index.php [L] </IfModule> .htaccess under / : This does not work as expected. Apache serves the page. ASSERT: This would redirect to domain.com/ without index.cfm Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.cfm$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.cfm [L] </IfModule> .htaccess under / : This works I'm presuming this is working because the redirect is to another .cfm page and a 404 handler in Application.cfc ... Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^.*\.cfm$ - [L] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{ENV:REDIRECT_STATUS} =404 RewriteRule . /404.cfm$ [L] </IfModule> I've attempted numerous different methods to rewrite .cfm urls ... Adding [PT], [L], [R], [NS], Moving the script to Directory blocks under httpd.conf --- all with the same results ... either the rewrite doesn't work or Apache crashes in an endless loop ... Any help would be greatly appreciated. Below is a single-visit rewrite log snippet for a request to /index.cfm ... the pass-through is taking effect before the rewrite ... cat rewrite_dump_mod | grep index.cfm [perdir /home/foo/public_html/] strip per-dir prefix: /home/foo/public_html/index.cfm -> index.cfm [perdir /home/foo/public_html/] applying pattern '^.*\.cfm$' to uri 'index.cfm' [perdir /home/foo/public_html/] pass through /home/foo/public_html/index.cfm [perdir /home/foo/public_html/] strip per-dir prefix: /home/foo/public_html/index.cfm -> index.cfm [perdir /home/foo/public_html/] applying pattern '^.*\.cfm$' to uri 'index.cfm' [perdir /home/foo/public_html/] pass through /home/foo/public_html/index.cfm * UPDATE * I've managed to figure this out ... it took a while ... Options -Indexes -Multiviews +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] RewriteCond %{THE_REQUEST} ^.*/index\.cfm RewriteRule ^(.*)index.cfm http://%{HTTP_HOST}/$1 [R=301,L] </IfModule>

  Read the article

• need assistance with my.cnf - 1500% CPU usage

  - by Alan Long

  I'm running into a few issues with our new database server. It is a HP G8 with 2 INTEL XEON E5-2650 processors and 32GB of ram. This server is dedicated as a MySQL server (5.1.69) for our intranet portal. I have been having issues with this server staying alive - I notice high CPU usage during certain times of day (8% ~ 1500%+) and see very low memory usage (7 ~ 15%) based on using the 'top' command. When the CPU usage passes 1000%, that is when the app usually dies. I'm trying to see what I'm doing wrong with the config file, hopefully one of the experts can chime in and let me know what they think. See below for my.cnf file: [mysqld] default-storage-engine=InnoDB datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock #user=mysql large-pages # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_connections=275 tmp_table_size=1G key_buffer_size=384M key_buffer=384M thread_cache_size=1024 long_query_time=5 low_priority_updates=1 max_heap_table_size=1G myisam_sort_buffer_size=8M concurrent_insert=2 table_cache=1024 sort_buffer_size=8M read_buffer_size=5M read_rnd_buffer_size=6M join_buffer_size=16M table_definition_cache=6k open_files_limit=8k slow_query_log #skip-name-resolve # Innodb Settings innodb_buffer_pool_size=18G innodb_thread_concurrency=0 innodb_log_file_size=1G innodb_log_buffer_size=16M innodb_flush_log_at_trx_commit=2 innodb_lock_wait_timeout=50 innodb_file_per_table #innodb_buffer_pool_instances=4 #eliminating double buffering innodb_flush_method = O_DIRECT flush_time=86400 innodb_additional_mem_pool_size=40M #innodb_io_capacity = 5000 #innodb_read_io_threads = 64 #innodb_write_io_threads = 64 # increase until threads_created doesnt grow anymore thread_cache=1024 query_cache_type=1 query_cache_limit=4M query_cache_size=256M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 0 wait_timeout = 1800 connect_timeout = 10 interactive_timeout = 60 [mysqldump] max_allowed_packet=32M [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid log-slow-queries=/var/log/mysql/slow-queries.log long_query_time = 1 log-queries-not-using-indexes we connect to one database with 75 tables, the largest table has 1,150,000 entries and the second largest has 128,036 entries. I have also verified that our PHP queries are optimized as best as possible. Reference - MySQLtuner: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.69-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 420M (Tables: 75) [!!] Total fragmented tables: 75 -------- Security Recommendations ------------------------------------------- [!!] User '[email protected]' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 1h 14m 50s (8M q [1K qps], 705 conn, TX: 6B, RX: 892M) [--] Reads / Writes: 68% / 32% [--] Total buffers: 19.7G global + 35.2M per thread (275 max threads) [!!] Maximum possible memory usage: 29.1G (93% of installed RAM) [OK] Slow queries: 0% (472/8M) [OK] Highest usage of available connections: 66% (183/275) [OK] Key buffer size / total MyISAM indexes: 384.0M/91.0K [OK] Key buffer hit rate: 100.0% (173 cached / 0 reads) [OK] Query cache efficiency: 96.2% (7M cached / 7M selects) [!!] Query cache prunes per day: 553614 [OK] Sorts requiring temporary tables: 0% (3 temp sorts / 1K sorts) [!!] Temporary tables created on disk: 49% (3K on disk / 7K total) [OK] Thread cache hit rate: 74% (183 created / 705 connections) [OK] Table cache hit rate: 97% (231 open / 238 opened) [OK] Open file limit used: 0% (17/8K) [OK] Table locks acquired immediately: 100% (432K immediate / 432K locks) [OK] InnoDB data size / buffer pool: 420.9M/18.0G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 256M) [see warning above] Thanks in advanced for your help!

  Read the article

• mySQL Optimization Suggestions

  - by Brian Schroeter

  I'm trying to optimize our mySQL configuration for our large Magento website. The reason I believe that mySQL needs to be configured further is because New Relic has shown that our SELECT queries are taking a long time (20,000+ ms) in some categories. I ran MySQLTuner 1.3.0 and got the following results... (Disclaimer: I restarted mySQL earlier after tweaking some settings, and so the results here may not be 100% accurate): >> MySQLTuner 1.3.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering [OK] Currently running supported MySQL version 5.5.37-35.0 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +ARCHIVE +BLACKHOLE +CSV -FEDERATED +InnoDB +MRG_MYISAM [--] Data in MyISAM tables: 7G (Tables: 332) [--] Data in InnoDB tables: 213G (Tables: 8714) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [--] Data in MEMORY tables: 0B (Tables: 353) [!!] Total fragmented tables: 5492 -------- Security Recommendations ------------------------------------------- [!!] User '@host5.server1.autopartsnetwork.com' has no password set. [!!] User '@localhost' has no password set. [!!] User 'root@%' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 5h 3m 4s (5M q [317.443 qps], 42K conn, TX: 18B, RX: 2B) [--] Reads / Writes: 95% / 5% [--] Total buffers: 35.5G global + 184.5M per thread (1024 max threads) [!!] Maximum possible memory usage: 220.0G (174% of installed RAM) [OK] Slow queries: 0% (6K/5M) [OK] Highest usage of available connections: 5% (61/1024) [OK] Key buffer size / total MyISAM indexes: 512.0M/3.1G [OK] Key buffer hit rate: 100.0% (102M cached / 45K reads) [OK] Query cache efficiency: 66.9% (3M cached / 5M selects) [!!] Query cache prunes per day: 3486361 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 812K sorts) [!!] Joins performed without indexes: 1328 [OK] Temporary tables created on disk: 11% (126K on disk / 1M total) [OK] Thread cache hit rate: 99% (61 created / 42K connections) [!!] Table cache hit rate: 19% (9K open / 49K opened) [OK] Open file limit used: 2% (712/25K) [OK] Table locks acquired immediately: 100% (5M immediate / 5M locks) [!!] InnoDB buffer pool / data size: 32.0G/213.4G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increasing the query_cache size over 128M may reduce performance Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 512M) [see warning above] join_buffer_size (> 128.0M, or always use indexes with joins) table_cache (> 12288) innodb_buffer_pool_size (>= 213G) My my.cnf configuration is as follows... [client] port = 3306 [mysqld_safe] nice = 0 [mysqld] tmpdir = /var/lib/mysql/tmp user = mysql port = 3306 skip-external-locking character-set-server = utf8 collation-server = utf8_general_ci event_scheduler = 0 key_buffer = 512M max_allowed_packet = 64M thread_stack = 512K thread_cache_size = 512 sort_buffer_size = 24M read_buffer_size = 8M read_rnd_buffer_size = 24M join_buffer_size = 128M # for some nightly processes client sessions set the join buffer to 8 GB auto-increment-increment = 1 auto-increment-offset = 1 myisam-recover = BACKUP max_connections = 1024 # max connect errors artificially high to support behaviors of NetScaler monitors max_connect_errors = 999999 concurrent_insert = 2 connect_timeout = 5 wait_timeout = 180 net_read_timeout = 120 net_write_timeout = 120 back_log = 128 # this table_open_cache might be too low because of MySQL bugs #16244691 and #65384) table_open_cache = 12288 tmp_table_size = 512M max_heap_table_size = 512M bulk_insert_buffer_size = 512M open-files-limit = 8192 open-files = 1024 query_cache_type = 1 # large query limit supports SOAP and REST API integrations query_cache_limit = 4M # larger than 512 MB query cache size is problematic; this is typically ~60% full query_cache_size = 512M # set to true on read slaves read_only = false slow_query_log_file = /var/log/mysql/slow.log slow_query_log = 0 long_query_time = 0.2 expire_logs_days = 10 max_binlog_size = 1024M binlog_cache_size = 32K sync_binlog = 0 # SSD RAID10 technically has a write capacity of 10000 IOPS innodb_io_capacity = 400 innodb_file_per_table innodb_table_locks = true innodb_lock_wait_timeout = 30 # These servers have 80 CPU threads; match 1:1 innodb_thread_concurrency = 48 innodb_commit_concurrency = 2 innodb_support_xa = true innodb_buffer_pool_size = 32G innodb_file_per_table innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 2G skip-federated [mysqldump] quick quote-names single-transaction max_allowed_packet = 64M I have a monster of a server here to power our site because our catalog is very large (300,000 simple SKUs), and I'm just wondering if I'm missing anything that I can configure further. :-) Thanks!

  Read the article

• What networking hardware do I need in this situation (Fairpoint [ISP] "E-DIA" connection)?

  - by Tegeril

  Right away you'd probably want to say, "Well just ask Fairpoint." I've done that, a number of times in as many different ways I can phrase it and just keep hitting a brick wall where they will not commit to giving any useful information and instead recommend contracting an outside firm and spending a pile of money. Anyway... I'm trying to help a family member out with an office connection that is being setup. I've managed to scrape tiny details here and there from our discussions with the ISP (Fairpoint in Maine) about what is going to be done and what is going to be needed. This is the connection that is being setup: http://www.fairpoint.com/enterprise/vantagepoint/e-dia/index.jsp Information I have been given: Via this connection I can get IPs across different C blocks if that were necessary (it is not) Fairpoint is bringing hardware with them that they claim simply does the conversion from whatever line is coming in the building to ethernet, they have referred to this as the "Fairpoint Netvanta" which I know suggests a line of products that I have looked up, but some (most? all?) of those seems to handle all the routing that I saw. Fairpoint says that I need to bring my own router to sit behind their device. They have literally declined to even suggest products that have worked for other clients in the past and fall back on "any business router works, not a home router." That alone makes my head spin. Detail and clarity hit a brick wall from there. At one moment I got them to cough up that the router I provide needs to be able to do VPN tunneling but they typically fall back to "not a home router" and I was even given "just a business router, Cisco or something, it'll be $500-$1000". Now I know that VPN tunneling routers exist well below that price point and since this connection is going to one machine, possibly two only via ethernet, my desire to purchase networking hardware that over-delivers what I need is not very high. They are literally setting all this up, have provided no configuration details for after they finish, and expect me to just plunk a $500+ router behind it and cross my fingers or contract out to a third party company. If there were other options available for the location, I would have dropped them in a second, but there aren't. The device that is connected requires a static IP and I'm honestly a bit hazy on the necessity of an additional router behind their device and generally a bit over my head. I presume that the router needs to be able to serve external static IPs to its clients, but I really don't know what is going to show up when they come to do the install. This was originally going to be run via an ADSL bridge modem with a range of static IPs (which is easy and is currently setup properly) but the location is too far from the telco to get speeds that we really want for upload and this is also a connection that needs high availability. Any suggestions would be greatly appreciated (I see a number of options in the Cisco Small Business line and other competitors that aren't going to break the bank…), especially if you've worked with Fairpoint before! Thanks for reading my wall of text.

  Read the article

• Can not open port 3306 on Ubuntu using iptables

  - by user94626

  I am trying to open port 3306 (for remote mysql connections) on my ubuntu 12.04 server machine but for the life of me can't get the damned thing to work! Here is what I did: 1) list current firewall rules: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 225 16984 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 220 69605 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 486 54824 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 4 208 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 4 208 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 735 182K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 225 16984 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 2) try to connect from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect 3) try to add a new rule to iptables: iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT 4) make sure the new rule is added: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 359 25972 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 251 78665 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 628 64420 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 5 260 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 5 260 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 919 213K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 359 25972 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 which appears to be the case (last line in "Chain INPUT" section). 5) try to connect again from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect which is failing again. 6) try to flush all rules: $> sudo iptables -F 7) this time I CAN CONNECT. 8) reboot server and try to connect, FAILURE. I suspect since the new rule is being appended at the end it will have no effect as there appears to be a "reject all" sort of rule before it. If this is the case, how to make sure the new rule is added in the right order? Otherwise, what am I missing? Please help.

  Read the article

• TFS 2010 Basic Concepts

  - by jehan

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here, I’m going to discuss some key Architectural changes and concepts that have taken place in TFS 2010 when compared to TFS 2008. In TFS 2010 Installation, First you need to do the Installation and then you have to configure the Installation Feature from the available features. This is bit similar to SharePoint Installation, where you will first do the Installation and then configure the SharePoint Farms. 1) Installation Features available in TFS2010: a) Basic: It is the most compact TFS installation possible. It will install and configure Source Control, Work Item tracking and Build Services only. (SharePoint and Reporting Integration will not be possible). b) Standard Single Server: This is suitable for Single Server deployment of TFS. It will install and configure Windows SharePoint Services for you and will use the default instance of SQL Server. c) Advanced: It is suitable, if you want use Remote Servers for SQL Server Databases, SharePoint Products and Technologies and SQL Server Reporting Services. d) Application Tier Only: If you want to configure high availability for Team Foundation Server in a Load Balanced Environment (NLB) or you want to move Team Foundation Server from one server to other or you want to restore TFS. e) Upgrade: If you want to upgrade from a prior version of TFS. Note: One more important thing to know here about  TFS 2010 Basic is that,  it can be installed on Client Operations Systems(Windows 7 and Windows Vista SP3), Where as  earlier you cannot Install previous version of TFS (2008 and 2005) on client OS. 2) Team Project Collections: Connect to TFS dialog box in TFS 2008:  In TFS 2008, the TFS Server contains a set of Team Projects and each project may or may not be independent of other projects and every checkin gets a ever increasing  changeset ID  irrespective of the team project in which it is checked in and the same applies to work items  also, who also gets unique Work Item Ids.The main problem with this approach was that there are certain things which were impossible to do; those were required as per the Application Development Process. a)      If something has gone wrong in one team project and now you want to restore it back to earlier state where it was working properly then it requires you to restore the Database of Team Foundation Server from the backup you have taken as per your Maintenance plans and because of this the other team projects may lose out on the work which is not backed up. b)       Your company had a merge with some other company and now you have two TFS servers. One TFS Server which you are working on and other TFS server which other company was working and now after the merge you want to integrate the team projects from two TFS servers into one, which is almost impossible to achieve in TFS 2008. Though you can create the Team Projects in one server manually (In Source Control) which you want to integrate from the other TFS Server, but will lose out on History of Change Sets and Work items and others which are very important. There were few more issues of this sort, which were difficult to resolve in TFS 2008. To resolve issues related to above kind of scenarios which were mainly related TFS Maintenance, Integration, migration and Security,  Microsoft has come up with Team Project Collections concept in TFS 2010.This concept is similar to SharePoint Site Collections and if you are familiar with SharePoint Architecture, then it will help you to understand TFS 2010 Architecture easily. Connect to TFS dialog box in TFS 2010: In above dialog box as you can see there are two Team Project Collections, each team project can contain any number of team projects as you can see on right side it shows the two Team Projects in Team Project Collection (Default Collection) which I have chosen. Note: You can connect to only one Team project Collection at a time using an instance of  TFS Team Explorer. How does it work? To introduce Team Project Collections, changes have been done in reorganization of TFS databases. TFS 2008 was composed of 5-7 databases partitioned by subsystem (each for Version Control, Work Item Tracking, Build, Integration, Project Management...) New TFS 2010 database architecture: TFS_Config: It’s the root database and it contains centralized TFS configuration data, including the list of all team projects exist in TFS server. TFS_Warehouse: The data warehouse contains all the reporting data of served by this server (farm). TFS_* : This contains individual team project collection data. This database contains all the operational data of team project collection regardless of subsystem.In additional to this, you will have databases for SharePoint and Report Server. 3) TFS Farms:  As TFS 2010 is more flexible to configure as multiple Application tiers and multiple Database tiers, so it will be more appropriate to call as TFS Farm if you going for multi server installation of TFS. NLB support for TFS application tiers – With TFS 2010: you can configure multiple TFS application tier machines to serve the same set of Team Project Collections. The primary purpose of NLB support is to enable a cleaner and more complete high availability than in TFS 2008. Even if any application tier in the farm fails then farm will automatically continue to work with hardly any indication to end users of a problem. SQL data tiers: With 2010 you can configure many SQL Servers. Each Database can be configured to be on any SQL Server because each Team Project Collection is an independent database. This feature can also be used to load balance databases across SQL Servers.These new capabilities will significantly change the way enterprises manage their TFS installations in the future. With Team Project Collections and TFS farms, you can create a single, arbitrarily large TFS installation. You can grow it incrementally by adding ATs and SQL Servers as needed.

  Read the article

• Conversation as User Assistance

  - by ultan o'broin

  Applications User Experience members (Erika Web, Laurie Pattison, and I) attended the User Assistance Europe Conference in Stockholm, Sweden. We were impressed with the thought leadership and practical application of ideas in Anne Gentle's keynote address "Social Web Strategies for Documentation". After the conference, we spoke with Anne to explore the ideas further. Anne Gentle (left) with Applications User Experience Senior Director Laurie Pattison In Anne's book called Conversation and Community: The Social Web for Documentation, she explains how user assistance is undergoing a seismic shift. The direction is away from the old print manuals and online help concept towards a web-based, user community-driven solution using social media tools. User experience professionals now have a vast range of such tools to start and nurture this "conversation": blogs, wikis, forums, social networking sites, microblogging systems, image and video sharing sites, virtual worlds, podcasts, instant messaging, mashups, and so on. That user communities are a rich source of user assistance is not a surprise, but the extent of available assistance is. For example, we know from the Consortium for Service Innovation that there has been an 'explosion' of user-generated content on the web. User-initiated community conversations provide as much as 30 times the number of official help desk solutions for consortium members! The growing reliance on user community solutions is clearly a user experience issue. Anne says that user assistance as conversation "means getting closer to users and helping them perform well. User-centered design has been touted as one of the most important ideas developed in the last 20 years of workplace writing. Now writers can take the idea of user-centered design a step further by starting conversations with users and enabling user assistance in interactions." Some of Anne's favorite examples of this paradigm shift from the world of traditional documentation to community conversation include: Writer Bob Bringhurst's blog about Adobe InDesign and InCopy products and Adobe's community help The Microsoft Development Network Community Center ·The former Sun (now Oracle) OpenDS wiki, NetBeans Ruby and other community approaches to engage diverse audiences using screencasts, wikis, and blogs. Cisco's customer support wiki, EMC's community, as well as Symantec and Intuit's approaches The efforts of Ubuntu, Mozilla, and the FLOSS community generally Adobe Writer Bob Bringhurst's Blog Oracle is not without a user community conversation too. Besides the community discussions and blogs around documentation offerings, we have the My Oracle Support Community forums, Oracle Technology Network (OTN) communities, wiki, blogs, and so on. We have the great work done by our user groups and customer councils. Employees like David Haimes reach out, and enthusiastic non-employee gurus like Chet Justice (OracleNerd), Floyd Teter and Eddie Awad provide great "how-to" information too. But what does this paradigm shift mean for existing technical writers as users turn away from the traditional printable PDF manual deliverables? We asked Anne after the conference. The writer role becomes one of conversation initiator or enabler. The role evolves, along with the process, as the users define their concept of user assistance and terms of engagement with the product instead of having it pre-determined. It is largely a case now of "inventing the job while you're doing it, instead of being hired for it" Anne said. There is less emphasis on formal titles. Anne mentions that her own title "Content Stacker" at OpenStack; others use titles such as "Content Curator" or "Community Lead". However, the role remains one essentially about communications, "but of a new type--interacting with users, moderating, curating content, instead of sitting down to write a manual from start to finish." Clearly then, this role is open to more than professional technical writers. Product managers who write blogs, developers who moderate forums, support professionals who update wikis, rock star programmers with a penchant for YouTube are ideal. Anyone with the product knowledge, empathy for the user, and flair for relationships on the social web can join in. Some even perform these roles already but do not realize it. Anne feels the technical communicator space will move from hiring new community conversation professionals (who are already active in the space through blogging, tweets, wikis, and so on) to retraining some existing writers over time. Our own research reveals that the established proponents of community user assistance even set employee performance objectives for internal content curators about the amount of community content delivered by people outside the organization! To take advantage of the conversations on the web as user assistance, enterprises must first establish where on the spectrum their community lies. "What is the line between community willingness to contribute and the enterprise objectives?" Anne asked. "The relationship with users must be managed and also measured." Anne believes that the process can start with a "just do it" approach. Begin by reaching out to existing user groups, individual bloggers and tweeters, forum posters, early adopter program participants, conference attendees, customer advisory board members, and so on. Use analytical tools to measure the level of conversation about your products and services to show a return on investment (ROI), winning management support. Anne emphasized that success with the community model is dependent on lowering the technical and motivational barriers so that users can readily contribute to the conversation. Simple tools must be provided, and guidelines, if any, must be straightforward but not mandatory. The conversational approach is one where traditional style and branding guides do not necessarily apply. Tools and infrastructure help users to create content easily, to search and find the information online, read it, rate it, translate it, and participate further in the content's evolution. Recognizing contributors by using ratings on forums, giving out Twitter kudos, conference invitations, visits to headquarters, free products, preview releases, and so on, also encourages the adoption of the conversation model. The move to conversation as user assistance is not free, but there is a business ROI. The conversational model means that customer service is enhanced, as user experience moves from a functional to a valued, emotional level. Studies show a positive correlation between loyalty and financial performance (Consortium for Service Innovation, 2010), and as customer experience and loyalty become key differentiators, user experience professionals cannot explore the model's possibilities. The digital universe (measured at 1.2 million petabytes in 2010) is doubling every 12 to 18 months, and 70 percent of that universe consists of user-generated content (IDC, 2010). Conversation as user assistance cannot be ignored but must be embraced. It is a time to manage for abundance, not scarcity. Besides, the conversation approach certainly sounds more interesting, rewarding, and fun than the traditional model! I would like to thank Anne for her time and thoughts, and recommend that all user assistance professionals read her book. You can follow Anne on Twitter at: http://www.twitter.com/annegentle. Oracle's Acrolinx IQ deployment was used to author this article.

  Read the article

• Issue 15: The Benefits of Oracle Exastack

  - by rituchhibber

       SOLUTIONS FOCUS The Benefits of Oracle Exastack Paul ThompsonDirector, Alliances and Solutions Partner ProgramsOracle EMEA Alliances & Channels RESOURCES -- Oracle PartnerNetwork (OPN) Oracle Exastack Program Oracle Exastack Ready Oracle Exastack Optimized Oracle Exastack Labs and Enablement Resources Oracle Exastack Labs Video Tour SUBSCRIBE FEEDBACK PREVIOUS ISSUES Exastack is a revolutionary programme supporting Oracle independent software vendor partners across the entire Oracle technology stack. Oracle's core strategy is to engineer software and hardware together, and our ISV strategy is the same. At Oracle we design engineered systems that are pre-integrated to reduce the cost and complexity of IT infrastructures while increasing productivity and performance. Oracle innovates and optimises performance at every layer of the stack to simplify business operations, drive down costs and accelerate business innovation. Our engineered systems are optimised to achieve enterprise performance levels that are unmatched in the industry. Faster time to production is achieved by implementing pre-engineered and pre-assembled hardware and software bundles. Our strategy of delivering a single-vendor stack simplifies and reduces costs associated with purchasing, deploying, and supporting IT environments for our customers and partners. In parallel to this core engineered systems strategy, the Oracle Exastack Program enables our Oracle ISV partners to leverage a scalable, integrated infrastructure that delivers their applications tuned, tested and optimised for high-performance. Specifically, the Oracle Exastack Program helps ISVs run their solutions on the Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, and Oracle SPARC SuperCluster T4-4 - integrated systems products in which the software and hardware are engineered to work together. These products provide OPN members with a lower cost and high performance infrastructure for database and application workloads across on-premise and cloud based environments. Ready and Optimized Oracle Partners can now leverage our new Oracle Exastack Program to become Oracle Exastack Ready and Oracle Exastack Optimized. Partners can achieve Oracle Exastack Ready status through their support for Oracle Solaris, Oracle Linux, Oracle VM, Oracle Database, Oracle WebLogic Server, Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, and Oracle SPARC SuperCluster T4-4. By doing this, partners can demonstrate to their customers that their applications are available on the latest major releases of these products. The Oracle Exastack Ready programme helps customers readily differentiate Oracle partners from lesser software developers, and identify applications that support Oracle engineered systems. Achieving Oracle Exastack Optimized status demonstrates that an OPN member has proven itself against goals for performance and scalability on Oracle integrated systems. This status enables end customers to readily identify Oracle partners that have tested and tuned their solutions for optimum performance on an Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, and Oracle SPARC SuperCluster T4-4. These ISVs can display the Oracle Exadata Optimized, Oracle Exalogic Optimized or Oracle SPARC SuperCluster Optimized logos on websites and on all their collateral to show that they have tested and tuned their application for optimum performance. Deliver higher value to customers Oracle's investment in engineered systems enables ISV partners to deliver higher value to customer business processes. New innovations are enabled through extreme performance unachievable through traditional best-of-breed multi-vendor server/software approaches. Core product requirements can be launched faster, enabling ISVs to focus research and development investment on core competencies in order to bring value to market as quickly as possible. Through Exastack, partners no longer have to worry about the underlying product stack, which allows greater focus on the development of intellectual property above the stack. Partners are not burdened by platform issues and can concentrate simply on furthering their applications. The advantage to end customers is that partners can focus all efforts on business functionality, rather than bullet-proofing underlying technologies, and so will inevitably deliver application updates faster. Exastack provides ISVs with a number of flexible deployment options, such as on-premise or Cloud, while maintaining one single code base for applications regardless of customer deployment preference. Customers buying their solutions from Exastack ISVs can therefore be confident in deploying on their own networks, on private clouds or into a public cloud. The underlying platform will support all conceivable deployments, enabling a focus on the ISV's application itself that wouldn't be possible with other vendor partners. It stands to reason that Exastack accelerates time to value as well as lowering implementation costs all round. There is a big competitive advantage in partners being able to offer customers an optimised, pre-configured solution rather than an assortment of components and a suggested fit. Once a customer has decided to buy an Oracle Exastack Ready or Optimized partner solution, it will be up and running without any need for the customer to conduct testing of its own. Operational costs and complexity are also reduced, thanks to streamlined customer support through standardised configurations and pro-active monitoring. 'Engineered to Work Together' is a significant statement of Oracle strategy. It guarantees smoother deployment of a single vendor solution, clear ownership with no finger-pointing and the peace of mind of the Oracle Support Centre underpinning the entire product stack. Next steps Every OPN member with packaged applications must seriously consider taking steps to become Exastack Ready, or Exastack Optimized at the first opportunity. That first step down the track is to talk to an expert on the OPN Portal, at the Oracle Partner Business Center or to discuss the next steps with the closest Oracle account manager. Oracle Exastack lab environments and other technical enablement resources are available for OPN members wishing to further their knowledge of Oracle Exastack and qualify their applications for Oracle Exastack Optimized. New Boot Camps and Guided Learning Paths (GLPs), tailored specifically for ISVs, are available for Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, Oracle Linux, Oracle Solaris, Oracle Database, and Oracle WebLogic Server. More information about these GLPs and Boot Camps (including delivery dates and locations) are posted on the OPN Competency Center and corresponding OPN Knowledge Zones. Learn more about Oracle Exastack labs and ISV specific enablement resources. "Oracle Specialized partners are of course front-and-centre, with potential customers clearly directed to those partners and to Exadata Ready partners as a matter of priority." --More OpenWorld 2011 highlights for Oracle partners and customers Oracle Application Testing Suite 9.3 application testing solution for Web, SOA and Oracle Applications Oracle Application Express Release 4.1 improving the development of database-centric Web 2.0 applications and reports Oracle Unified Directory 11g helping customers manage the critical identity information that drives their business applications Oracle SOA Suite for healthcare integration Oracle Enterprise Pack for Eclipse 11g demonstrating continued commitment to the developer and open source communities Oracle Coherence 3.7.1, the latest release of the industry's leading distributed in-memory data grid Oracle Process Accelerators helping to simplify and accelerate time-to-value for customers' business process management initiatives Oracle's JD Edwards EnterpriseOne on the iPad meeting the increasingly mobile demands of today's workforces Oracle CRM On Demand Release 19 Innovation Pack introducing industry-leading hosted call centre and enterprise-marketing capabilities designed to drive further revenue and productivity while reducing costs and improving the customer experience Oracle's Primavera Portfolio Management 9 for businesses delivering on project portfolio goals with increased versatility, transparency and accuracy Oracle's PeopleSoft Human Capital Management (HCM) 9.1 On Demand Standard Edition helping customers manage their long-term investment in enterprise-wide business applications New versions of Oracle FLEXCUBE Universal Banking and Oracle FLEXCUBE Investor Servicing for Financial Institutions, as well as Oracle Financial Services Enterprise Case Management, Oracle Financial Services Pricing Management, Oracle Financial Management Analytics and Oracle Tax Analytics Oracle Utilities Network Management System 1.11 offering new modelling and analysis features to improve distribution-grid management for electric utilities Oracle Communications Network Charging and Control 4.4 helping communications service providers (CSPs) offer their customers more flexible charging options Plus many, many more technology announcements, enhancements, momentum news and community updates -- Oracle OpenWorld 2012 A date has already been set for Oracle OpenWorld 2012. Held once again in San Francisco, exhibitors, partners, customers and Oracle people will gather from 30 September until 4 November to meet, network and learn together with the rest of the global Oracle community. Register now for Oracle OpenWorld 2012 and save $$$! We'll reward your early planning for Oracle OpenWorld 2012 with reduced rates. Super Saver deals are now available! -- Back to the welcome page

  Read the article

• Oracle Data Mining a Star Schema: Telco Churn Case Study

  - by charlie.berger

  There is a complete and detailed Telco Churn case study "How to" Blog Series just posted by Ari Mozes, ODM Dev. Manager.  In it, Ari provides detailed guidance in how to leverage various strengths of Oracle Data Mining including the ability to: mine Star Schemas and join tables and views together to obtain a complete 360 degree view of a customer combine transactional data e.g. call record detail (CDR) data, etc. define complex data transformation, model build and model deploy analytical methodologies inside the Database  His blog is posted in a multi-part series.  Below are some opening excerpts for the first 3 blog entries.  This is an excellent resource for any novice to skilled data miner who wants to gain competitive advantage by mining their data inside the Oracle Database.  Many thanks Ari! Mining a Star Schema: Telco Churn Case Study (1 of 3) One of the strengths of Oracle Data Mining is the ability to mine star schemas with minimal effort.  Star schemas are commonly used in relational databases, and they often contain rich data with interesting patterns.  While dimension tables may contain interesting demographics, fact tables will often contain user behavior, such as phone usage or purchase patterns.  Both of these aspects - demographics and usage patterns - can provide insight into behavior.Churn is a critical problem in the telecommunications industry, and companies go to great lengths to reduce the churn of their customer base.  One case study1 describes a telecommunications scenario involving understanding, and identification of, churn, where the underlying data is present in a star schema.  That case study is a good example for demonstrating just how natural it is for Oracle Data Mining to analyze a star schema, so it will be used as the basis for this series of posts...... Mining a Star Schema: Telco Churn Case Study (2 of 3) This post will follow the transformation steps as described in the case study, but will use Oracle SQL as the means for preparing data.  Please see the previous post for background material, including links to the case study and to scripts that can be used to replicate the stages in these posts.1) Handling missing values for call data recordsThe CDR_T table records the number of phone minutes used by a customer per month and per call type (tariff).  For example, the table may contain one record corresponding to the number of peak (call type) minutes in January for a specific customer, and another record associated with international calls in March for the same customer.  This table is likely to be fairly dense (most type-month combinations for a given customer will be present) due to the coarse level of aggregation, but there may be some missing values.  Missing entries may occur for a number of reasons: the customer made no calls of a particular type in a particular month, the customer switched providers during the timeframe, or perhaps there is a data entry problem.  In the first situation, the correct interpretation of a missing entry would be to assume that the number of minutes for the type-month combination is zero.  In the other situations, it is not appropriate to assume zero, but rather derive some representative value to replace the missing entries.  The referenced case study takes the latter approach.  The data is segmented by customer and call type, and within a given customer-call type combination, an average number of minutes is computed and used as a replacement value.In SQL, we need to generate additional rows for the missing entries and populate those rows with appropriate values.  To generate the missing rows, Oracle's partition outer join feature is a perfect fit.  select cust_id, cdre.tariff, cdre.month, minsfrom cdr_t cdr partition by (cust_id) right outer join     (select distinct tariff, month from cdr_t) cdre     on (cdr.month = cdre.month and cdr.tariff = cdre.tariff);   ....... Mining a Star Schema: Telco Churn Case Study (3 of 3) Now that the "difficult" work is complete - preparing the data - we can move to building a predictive model to help identify and understand churn.The case study suggests that separate models be built for different customer segments (high, medium, low, and very low value customer groups).  To reduce the data to a single segment, a filter can be applied: create or replace view churn_data_high asselect * from churn_prep where value_band = 'HIGH'; It is simple to take a quick look at the predictive aspects of the data on a univariate basis.  While this does not capture the more complex multi-variate effects as would occur with the full-blown data mining algorithms, it can give a quick feel as to the predictive aspects of the data as well as validate the data preparation steps.  Oracle Data Mining includes a predictive analytics package which enables quick analysis. begin  dbms_predictive_analytics.explain(   'churn_data_high','churn_m6','expl_churn_tab'); end; /select * from expl_churn_tab where rank <= 5 order by rank; ATTRIBUTE_NAME       ATTRIBUTE_SUBNAME EXPLANATORY_VALUE RANK-------------------- ----------------- ----------------- ----------LOS_BAND                                      .069167052          1MINS_PER_TARIFF_MON  PEAK-5                   .034881648          2REV_PER_MON          REV-5                    .034527798          3DROPPED_CALLS                                 .028110322          4MINS_PER_TARIFF_MON  PEAK-4                   .024698149          5From the above results, it is clear that some predictors do contain information to help identify churn (explanatory value > 0).  The strongest uni-variate predictor of churn appears to be the customer's (binned) length of service.  The second strongest churn indicator appears to be the number of peak minutes used in the most recent month.  The subname column contains the interior piece of the DM_NESTED_NUMERICALS column described in the previous post.  By using the object relational approach, many related predictors are included within a single top-level column. .....   NOTE:  These are just EXCERPTS.  Click here to start reading the Oracle Data Mining a Star Schema: Telco Churn Case Study from the beginning.    

  Read the article

• Analytic functions – they’re not aggregates

  - by Rob Farley

  SQL 2012 brings us a bunch of new analytic functions, together with enhancements to the OVER clause. People who have known me over the years will remember that I’m a big fan of the OVER clause and the types of things that it brings us when applied to aggregate functions, as well as the ranking functions that it enables. The OVER clause was introduced in SQL Server 2005, and remained frustratingly unchanged until SQL Server 2012. This post is going to look at a particular aspect of the analytic functions though (not the enhancements to the OVER clause). When I give presentations about the analytic functions around Australia as part of the tour of SQL Saturdays (starting in Brisbane this Thursday), and in Chicago next month, I’ll make sure it’s sufficiently well described. But for this post – I’m going to skip that and assume you get it. The analytic functions introduced in SQL 2012 seem to come in pairs – FIRST_VALUE and LAST_VALUE, LAG and LEAD, CUME_DIST and PERCENT_RANK, PERCENTILE_CONT and PERCENTILE_DISC. Perhaps frustratingly, they take slightly different forms as well. The ones I want to look at now are FIRST_VALUE and LAST_VALUE, and PERCENTILE_CONT and PERCENTILE_DISC. The reason I’m pulling this ones out is that they always produce the same result within their partitions (if you’re applying them to the whole partition). Consider the following query: SELECT     YEAR(OrderDate),     FIRST_VALUE(TotalDue)         OVER (PARTITION BY YEAR(OrderDate)               ORDER BY OrderDate, SalesOrderID               RANGE BETWEEN UNBOUNDED PRECEDING                         AND UNBOUNDED FOLLOWING),     LAST_VALUE(TotalDue)         OVER (PARTITION BY YEAR(OrderDate)               ORDER BY OrderDate, SalesOrderID               RANGE BETWEEN UNBOUNDED PRECEDING                         AND UNBOUNDED FOLLOWING),     PERCENTILE_CONT(0.95)         WITHIN GROUP (ORDER BY TotalDue)         OVER (PARTITION BY YEAR(OrderDate)),     PERCENTILE_DISC(0.95)         WITHIN GROUP (ORDER BY TotalDue)         OVER (PARTITION BY YEAR(OrderDate)) FROM Sales.SalesOrderHeader ; This is designed to get the TotalDue for the first order of the year, the last order of the year, and also the 95% percentile, using both the continuous and discrete methods (‘discrete’ means it picks the closest one from the values available – ‘continuous’ means it will happily use something between, similar to what you would do for a traditional median of four values). I’m sure you can imagine the results – a different value for each field, but within each year, all the rows the same. Notice that I’m not grouping by the year. Nor am I filtering. This query gives us a result for every row in the SalesOrderHeader table – 31465 in this case (using the original AdventureWorks that dates back to the SQL 2005 days). The RANGE BETWEEN bit in FIRST_VALUE and LAST_VALUE is needed to make sure that we’re considering all the rows available. If we don’t specify that, it assumes we only mean “RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW”, which means that LAST_VALUE ends up being the row we’re looking at. At this point you might think about other environments such as Access or Reporting Services, and remember aggregate functions like FIRST. We really should be able to do something like: SELECT     YEAR(OrderDate),     FIRST_VALUE(TotalDue)         OVER (PARTITION BY YEAR(OrderDate)               ORDER BY OrderDate, SalesOrderID               RANGE BETWEEN UNBOUNDED PRECEDING                         AND UNBOUNDED FOLLOWING) FROM Sales.SalesOrderHeader GROUP BY YEAR(OrderDate) ; But you can’t. You get that age-old error: Msg 8120, Level 16, State 1, Line 5 Column 'Sales.SalesOrderHeader.OrderDate' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause. Msg 8120, Level 16, State 1, Line 5 Column 'Sales.SalesOrderHeader.SalesOrderID' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause. Hmm. You see, FIRST_VALUE isn’t an aggregate function. None of these analytic functions are. There are too many things involved for SQL to realise that the values produced might be identical within the group. Furthermore, you can’t even surround it in a MAX. Then you get a different error, telling you that you can’t use windowed functions in the context of an aggregate. And so we end up grouping by doing a DISTINCT. SELECT DISTINCT     YEAR(OrderDate),         FIRST_VALUE(TotalDue)              OVER (PARTITION BY YEAR(OrderDate)                   ORDER BY OrderDate, SalesOrderID                   RANGE BETWEEN UNBOUNDED PRECEDING                             AND UNBOUNDED FOLLOWING),         LAST_VALUE(TotalDue)             OVER (PARTITION BY YEAR(OrderDate)                   ORDER BY OrderDate, SalesOrderID                   RANGE BETWEEN UNBOUNDED PRECEDING                             AND UNBOUNDED FOLLOWING),     PERCENTILE_CONT(0.95)          WITHIN GROUP (ORDER BY TotalDue)         OVER (PARTITION BY YEAR(OrderDate)),     PERCENTILE_DISC(0.95)         WITHIN GROUP (ORDER BY TotalDue)         OVER (PARTITION BY YEAR(OrderDate)) FROM Sales.SalesOrderHeader ; I’m sorry. It’s just the way it goes. Hopefully it’ll change the future, but for now, it’s what you’ll have to do. If we look in the execution plan, we see that it’s incredibly ugly, and actually works out the results of these analytic functions for all 31465 rows, finally performing the distinct operation to convert it into the four rows we get in the results. You might be able to achieve a better plan using things like TOP, or the kind of calculation that I used in http://sqlblog.com/blogs/rob_farley/archive/2011/08/23/t-sql-thoughts-about-the-95th-percentile.aspx (which is how PERCENTILE_CONT works), but it’s definitely convenient to use these functions, and in time, I’m sure we’ll see good improvements in the way that they are implemented. Oh, and this post should be good for fellow SQL Server MVP Nigel Sammy’s T-SQL Tuesday this month.

  Read the article

• Replacing jQuery.live() with jQuery.on()

  - by Rick Strahl

  jQuery 1.9 and 1.10 have introduced a host of changes, but for the most part these changes are mostly transparent to existing application usage of jQuery. After spending some time last week with a few of my projects and going through them with a specific eye for jQuery failures I found that for the most part there wasn't a big issue. The vast majority of code continues to run just fine with either 1.9 or 1.10 (which are supposed to be in sync but with 1.10 removing support for legacy Internet Explorer pre-9.0 versions). However, one particular change in the new versions has caused me quite a bit of update trouble, is the removal of the jQuery.live() function. This is my own fault I suppose - .live() has been deprecated for a while, but with 1.9 and later it was finally removed altogether from jQuery. In the past I had quite a bit of jQuery code that used .live() and it's one of the things that's holding back my upgrade process, although I'm slowly cleaning up my code and switching to the .on() function as the replacement. jQuery.live() jQuery.live() was introduced a long time ago to simplify handling events on matched elements that exist currently on the document and those that are are added in the future and also match the selector. jQuery uses event bubbling, special event binding, plus some magic using meta data attached to a parent level element to check and see if the original target event element matches the selected selected elements (for more info see Elijah Manor's comment below). An Example Assume a list of items like the following in HTML for example and further assume that the items in this list can be appended to at a later point. In this app there's a smallish initial list that loads to start, and as the user scrolls towards the end of the initial small list more items are loaded dynamically and added to the list.<div id="PostItemContainer" class="scrollbox"> <div class="postitem" data-id="4z6qhomm"> <div class="post-icon"></div> <div class="postitemheader"><a href="show/4z6qhomm" target="Content">1999 Buick Century For Sale!</a></div> <div class="postitemprice rightalign">$ 3,500 O.B.O.</div> <div class="smalltext leftalign">Jun. 07 @ 1:06am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> <div class="postitem" data-id="2jtvuu17"> <div class="postitemheader"><a href="show/2jtvuu17" target="Content">Toyota VAN 1987</a></div> <div class="postitemprice rightalign">$950</div> <div class="smalltext leftalign">Jun. 07 @ 12:29am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> … </div> With the jQuery.live() function you could easily select elements and hook up a click handler like this:$(".postitem").live("click", function() {...}); Simple and perfectly readable. The behavior of the .live handler generally was the same as the corresponding simple event handlers like .click(), except that you have to explicitly name the event instead of using one of the methods. Re-writing with jQuery.on() With .live() removed in 1.9 and later we have to re-write .live() code above with an alternative. The jQuery documentation points you at the .on() or .delegate() functions to update your code. jQuery.on() is a more generic event handler function, and it's what jQuery uses internally to map the high level event functions like .click(),.change() etc. that jQuery exposes. Using jQuery.on() however is not a one to one replacement of the .live() function. While .on() can handle events directly and use the same syntax as .live() did, you'll find if you simply switch out .live() with .on() that events on not-yet existing elements will not fire. IOW, the key feature of .live() is not working. You can use .on() to get the desired effect however, but you have to change the syntax to explicitly handle the event you're interested in on the container and then provide a filter selector to specify which elements you are actually interested in for handling the event for. Sounds more complicated than it is and it's easier to see with an example. For the list above hooking .postitem clicks, using jQuery.on() looks like this:$("#PostItemContainer").on("click", ".postitem", function() {...}); You specify a container that can handle the .click event and then provide a filter selector to find the child elements that trigger the  the actual event. So here #PostItemContainer contains many .postitems, whose click events I want to handle. Any container will do including document, but I tend to use the container closest to the elements I actually want to handle the events on to minimize the event bubbling that occurs to capture the event. With this code I get the same behavior as with .live() and now as new .postitem elements are added the click events are always available. Sweet. Here's the full event signature for the .on() function: .on( events [, selector ] [, data ], handler(eventObject) ) Note that the selector is optional - if you omit it you essentially create a simple event handler that handles the event directly on the selected object. The filter/child selector required if you want life-like - uh, .live() like behavior to happen. While it's a bit more verbose than what .live() did, .on() provides the same functionality by being more explicit on what your parent container for trapping events is. .on() is good Practice even for ordinary static Element Lists As a side note, it's a good practice to use jQuery.on() or jQuery.delegate() for events in most cases anyway, using this 'container event trapping' syntax. That's because rather than requiring lots of event handlers on each of the child elements (.postitem in the sample above), there's just one event handler on the container, and only when clicked does jQuery drill down to find the matching filter element and tries to match it to the originating element. In the early days of jQuery I used manually build handlers that did this and manually drilled from the event object into the originalTarget to determine if it's a matching element. With later versions of jQuery the various event functions in jQuery essentially provide this functionality out of the box with functions like .on() and .delegate(). All of this is nothing new, but I thought I'd write this up because I have on a few occasions forgotten what exactly was needed to replace the many .live() function calls that litter my code - especially older code. This will be a nice reminder next time I have a memory blank on this topic. And maybe along the way I've helped one or two of you as well to clean up your .live() code…© Rick Strahl, West Wind Technologies, 2005-2013Posted in jQuery   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• SQL Server and Hyper-V Dynamic Memory Part 3

  - by SQLOS Team

  In parts 1 and 2 of this series we looked at the basics of Hyper-V Dynamic Memory and SQL Server memory management. In this part Serdar looks at configuration guidelines for SQL Server memory management. Part 3: Configuration Guidelines for Hyper-V Dynamic Memory and SQL Server Now that we understand SQL Server Memory Management and Hyper-V Dynamic Memory basics, let’s take a look at general configuration guidelines in order to utilize benefits of Hyper-V Dynamic Memory in your SQL Server VMs. Requirements Host Operating System Requirements Hyper-V Dynamic Memory feature is introduced with Windows Server 2008 R2 SP1. Therefore in order to use Dynamic Memory for your virtual machines, you need to have Windows Server 2008 R2 SP1 or Microsoft Hyper-V Server 2008 R2 SP1 in your Hyper-V host. Guest Operating System Requirements In addition to this Dynamic Memory is only supported in Standard, Web, Enterprise and Datacenter editions of windows running inside VMs. Make sure that your VM is running one of these editions. For additional requirements on each operating system see “Dynamic Memory Configuration Guidelines” here. SQL Server Requirements All versions of SQL Server support Hyper-V Dynamic Memory. However, only certain editions of SQL Server are aware of dynamically changing system memory. To have a truly dynamic environment for your SQL Server VMs make sure that you are running one of the SQL Server editions listed below: ·         SQL Server 2005 Enterprise ·         SQL Server 2008 Enterprise / Datacenter Editions ·         SQL Server 2008 R2 Enterprise / Datacenter Editions Configuration guidelines for other versions of SQL Server are covered below in the FAQ section. Guidelines for configuring Dynamic Memory Parameters Here is how to configure Dynamic Memory for your SQL VMs in a nutshell: Hyper-V Dynamic Memory Parameter Recommendation Startup RAM 1 GB + SQL Min Server Memory Maximum RAM > SQL Max Server Memory Memory Buffer % 5 Memory Weight Based on performance needs   Startup RAM In order to ensure that your SQL Server VMs can start correctly, ensure that Startup RAM is higher than configured SQL Min Server Memory for your VMs. Otherwise SQL Server service will need to do paging in order to start since it will not be able to see enough memory during startup. Also note that Startup Memory will always be reserved for your VMs. This will guarantee a certain level of performance for your SQL Servers, however setting this too high will limit the consolidation benefits you’ll get out of your virtualization environment. Maximum RAM This one is obvious. If you’ve configured SQL Max Server Memory for your SQL Server, make sure that Dynamic Memory Maximum RAM configuration is higher than this value. Otherwise your SQL Server will not grow to memory values higher than the value configured for Dynamic Memory. Memory Buffer % Memory buffer configuration is used to provision file cache to virtual machines in order to improve performance. Due to the fact that SQL Server is managing its own buffer pool, Memory Buffer setting should be configured to the lowest value possible, 5%. Configuring a higher memory buffer will prevent low resource notifications from Windows Memory Manager and it will prevent reclaiming memory from SQL Server VMs. Memory Weight Memory weight configuration defines the importance of memory to a VM. Configure higher values for the VMs that have higher performance requirements. VMs with higher memory weight will have more memory under high memory pressure conditions on your host. Questions and Answers Q1 – Which SQL Server memory model is best for Dynamic Memory? The best SQL Server model for Dynamic Memory is “Locked Page Memory Model”. This memory model ensures that SQL Server memory is never paged out and it’s also adaptive to dynamically changing memory in the system. This will be extremely useful when Dynamic Memory is attempting to remove memory from SQL Server VMs ensuring no SQL Server memory is paged out. You can find instructions on configuring “Locked Page Memory Model” for your SQL Servers here. Q2 – What about other SQL Server Editions, how should I configure Dynamic Memory for them? Other editions of SQL Server do not adapt to dynamically changing environments. They will determine how much memory they should allocate during startup and don’t change this value afterwards. Therefore make sure that you configure a higher startup memory for your VM because that will be all the memory that SQL Server utilize Tune Maximum Memory and Memory Buffer based on the other workloads running on the system. If there are no other workloads consider using Static Memory for these editions. Q3 – What if I have multiple SQL Server instances in a VM? Having multiple SQL Server instances in a VM is not a general recommendation for predictable performance, manageability and isolation. In order to achieve a predictable behavior make sure that you configure SQL Min Server Memory and SQL Max Server Memory for each instance in the VM. And make sure that: ·         Dynamic Memory Startup Memory is greater than the sum of SQL Min Server Memory values for the instances in the VM ·         Dynamic Memory Maximum Memory is greater than the sum of SQL Max Server Memory values for the instances in the VM Q4 – I’m using Large Page Memory Model for my SQL Server. Can I still use Dynamic Memory? The short answer is no. SQL Server does not dynamically change its memory size when configured with Large Page Memory Model. In virtualized environments Hyper-V provides large page support by default. Most of the time, Large Page Memory Model doesn’t bring any benefits to a SQL Server if it’s running in virtualized environments. Q5 – How do I monitor SQL performance when I’m trying Dynamic Memory on my VMs? Use the performance counters below to monitor memory performance for SQL Server: Process - Working Set: This counter is available in the VM via process performance counters. It represents the actual amount of physical memory being used by SQL Server process in the VM. SQL Server – Buffer Cache Hit Ratio: This counter is available in the VM via SQL Server counters. This represents the paging being done by SQL Server. A rate of 90% or higher is desirable. Conclusion These blog posts are a quick start to a story that will be developing more in the near future. We’re still continuing our testing and investigations to provide more detailed configuration guidelines with example performance numbers with a white paper in the upcoming months. Now it’s time to give SQL Server and Hyper-V Dynamic Memory a try. Use this guidelines to kick-start your environment. See what you think about it and let us know of your experiences. - Serdar Sutay Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Start a Mapping or Process Flow from OWB Browser

  - by Dong Ruirong

  Basically, we start a Mapping or Process Flow from Oracle Warehouse Builder (OWB) Design Client. But actually we can also start a Mapping or Process Flow from OWB Browser. This paper will introduce the Start Report first and then introduce how to start/rerun a Mapping or Process Flow from OWB Browser. Start Report Start Report is used to start an execution of a Mapping or Process Flow. So there are two kinds of Start Report: Mapping Start Report (See Figure 1) and Process Flow Start Report (See Figure 2). Start Report shows the Mapping or Process Flow identification properties, including latest deployment and latest execution, lists all execution parameters for the Mapping or Process Flow, which were specified by the latest deployment, and assigns parameter default values from the latest deployment specification. You can do a couple of things from Start Report: Sort execution parameters on name, category. Table 1 lists all parameters of a Mapping. Table 2 lists all parameters of a Process Flow. Change values of any input parameter where permitted. For some parameters, selection lists are provided. For example, Mapping’s parameter Audit Level has a selection list. Reset all parameter settings to their default values. Apply basic validation to parameter values before starting an execution. Start the Mapping or Process Flow, which means it is executed immediately. Navigate to Deployment Report for latest deployment details of the Mapping or Process Flow. Navigate to Execution Job Report for latest execution of current Mapping or Process Flow Link to on-link help Warehouse Report Page, Deployment Report, Execution Report, Execution Schedule Report and Execution Summary Report. Figure 1 Mapping Start Report Table 1 Execution Parameters and default values for a Mapping Category Name Mode Input Value System Audit Level In Error Details System Bulk Size In 1000 System Commit Frequency In 1000 System EXECUTE_RESUME_TASK In FALSE System FORCE_RESUME_OPTION In FALSE System Max No of Errors In 50 System NUMBER_OF_TIMES_TO_RETRY In 2 System Operating Mode In Set Based Fail Over to Row Based System PARALLEL_LEVEL In 0 System Procedure Name In main System Purge Group In WB Figure 2 Process Flow Start Report Table 2 Execution Parameters and default values for a Process Flow Category Name Mode Input Value System EVAL_LOCATION In   System Item Key In-Out   System Item Type In PFPKG_1 Start a Mapping or Process Flow To navigate to Start Report, it’s better to login OWB Browser with Control Center option; if not, after logging in OWB Browser, go to Control Center first. Then you can follow the ways introduced in this section to navigate to Start Report. One more thing you need to pay attention to is that you are not allowed to deploy any Mappings and Process Flows from OWB Browser as it’s not supported. So it’s necessary to deploy the Mappings and Process Flows first before starting them from OWB Browser. If you have deployed a Mapping or Process Flow but have not started it, please navigate from Object Summary Report or Deployment Schedule Report to Start Report. 1. Navigating from Object Summary Report to Start Report Open the Object Summary Report to see all deployed Mappings and Process Flows. Click the Mapping Name or Process Flow Name link to see its Deployment Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. 2. Navigating from Deployment Schedule Report to Start Report Open the Deployment Schedule Report to see deployment details of Mapping and Process Flow. Expand the project trees to find the deployed Mappings and Process Flows. Click the Mapping Name or Process Flow Name link to see its Deployment Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. Re-run a Mapping or Process Flow If you have executed a Mapping or Process Flow, you can navigate from Object Summary Report, Deployment Schedule Report, Execution Summary Report or Execution Schedule Report to Start Report. 1. Navigating from the Execution Summary Report to Start Report Open the Execution Summary Report to see all execution jobs including Mapping jobs and Process Flow jobs. Click on the Mapping Name or Process Flow Name to see its Execution Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. 2. Navigating from the Execution Schedule Report to Start Report Open the Execution Schedule Report to see list of all executions of Mapping and Process Flow. Click on the Mapping Name or Process Flow Name to see its Execution Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. If the execution of a Mapping or Process Flow is successful, you will see this message from the Start Report: Start Execution request successful. (See Figure 3) Figure 3 Execution Result You can also confirm the execution of the Mapping or Process Flow by referring to Execution Report of the current Mapping or Process Flow by clicking the link in the Available Reports tab for the given Mapping or Process Flow. One new record of execution job details is added to Execution Report of the Mapping or Process Flow which shows the details of the execution such as Start Time, Elapsed Time, Status, the number of records selected, inserted, updated, deleted etc.

  Read the article

• At the Java DEMOgrounds - JavaFX

  - by Janice J. Heiss

  JavaFX has made rapid progress in the last year, as is evidenced by the wealth of demos on display. A few questions appear to be prominent in the minds of JavaFX enthusiasts. Here are some questions with answers provided by Oracle’s JavaFX team.When will the rest of the JavaFX code be available in open source?Oracle has started to open source JavaFX. The existing platform code will finish being committed to OpenJFX by the end of the year.Why should I use JavaFX instead of HTML5?We see JavaFX as complementary to HTML5, and most companies we talk to react positively once they understand how they can benefit from a hybrid solution. As most HTML5 developers will tell you, the biggest obstacle to deploying HTML5 applications is fragmentation. JavaFX offers a convenient way to render HTML and JavaScript within its WebView component, which provides the same level of quality and features across Windows, Mac, and Linux. Additionally, JavaScript in WebView can make calls into the Java code, and vice versa, allowing developers to tap into the best of both worlds.What is the market penetration of JavaFX? It is currently limited, as we've just made available JavaFX on Mac and Linux in August, but we expect JavaFX to be present on millions of desktop-type systems now that JavaFX is included as part of the JRE. We have also significantly lowered the level of effort required to deploy an application bundling the JRE and JavaFX runtime libraries. Finally, we are seeing a lot of interest by companies operating in the embedded market, who have found it hard to develop compelling UIs with existing technologies.Below are summaries of JavaFX Demos on display at JavaOne 2012:JavaFX EnsembleEnsemble is a collection of over 100 JavaFX samples packaged as a JavaFX application. This demo is especially useful to those new to JavaFX, or those not familiar with its latest features (e.g. canvas, color picker). Ensemble is the reference for getting familiar with JavaFX functionality. Each sample can be run from within Ensemble, and the API for each sample, as well as the source code are available alongside the sample.The samples source code can be saved as a NetBeans project for convenience purposes, or can be copied as is in any other Java IDE. The version of Ensemble shown is packaged as a native Windows application, including the JRE and JavaFX libraries. It was created with the JavaFX packager, which provides multiple packaging options, and frees developers from the cumbersome and error-prone process of packaging a Java application.FX Experience ToolsFX Experience Tools is a JavaFX application that provides different utilities to create new skins for your JavaFX applications. One of the most powerful features of JavaFX is the ability to skin applications via CSS. Since not all Java developers are familiar with CSS, these utilities are a great starting point to create custom skins. JavaFX allows developers to easily customize the look and feel of their applications through CSS. FX Experience Tools makes it easy to create new themes for JavaFX applications, even if you are not familiar with CSS. FX Experience Tools is a JavaFX application packaged as a native application including the JRE and JavaFX runtime libraries. FX Experience tools shows how this type of deployment simplifies the packaging of Java applications without requiring developers to master the intricacies of Java application packaging. The download site for FX Experience Tools is http://fxexperience.com/2012/03/announcing-fx-experience-tools/ JavaFX Scene BuilderJavaFX Scene Builder is a visual layout tool that lets users quickly design the UI of your JavaFX application, without coding. Users can drag and drop UI components, modify their properties, apply style sheets, and the FXML code they create for the layout is automatically generated in the background. The result is an FXML file that can then be combined with a Java project by binding the UI to the application’s logic. Developers can easily create user interfaces for their application, as well as separate the application’s UI from the application logic for easier maintenance. Attendees can get this app by going to javafx.com and checking the link at top of the “Overview” page.Scene Builder allows developers to easily layout JavaFX UI controls, charts, shapes, and containers, so that you can quickly prototype user interfaces. It generates FXML, an XML-based markup language that enables users to define an application’s user interface, separately from the application logic. Scene Builder can be used in combination with any Java IDE, but is more tightly integrated with NetBeans IDE. It is written as a JavaFX application, with native desktop integration on Windows and Mac OS X. It’s a perfect example of a JavaFX application packages as a native application.Scene Builder is available for your preferred development platform. Besides the GA release on Windows and Mac, a Developer Preview of Scene Builder for Linux has just been made available.Scenic ViewScenic View is a tool that can be used to understand the current state of your application UI, and to also easily manipulate properties of the scenegraph without having to keep editing your code. Creating UIs is a complex process, and it can be hard and tedious detecting these issues, editing the code, and then compiling it to test the app again. Scenic View is a great diagnostics tool that helps developers identify these issues and correct them at runtime.Attendees can get Scenic View by going to javafx.com, selecting the “Community” tab, and clicking the link under the “Third Party Tools and Utilities” section.Scenic View allows developers to easily examine the state of a JavaFX application scenegraph while the application is running. Some of the latest features added to Scenic View include event monitoring, javadoc browsing, and contextual menus. The download site for Scenic View is available here: http://fxexperience.com/scenic-view/ Conference TourConference Tour is an application that lets users discover some of the major Java conferences throughout the world. The Conference Tour application shows how simple it is to mix JavaFX and HTML5 into a single, interactive application. Attendees get Conference Tour here.JavaFX includes a Web engine based on Webkit that provides a consistent web interface to render HTML5 across operating systems, within a JavaFX application. JavaFX features a bi-directional bridge that allows Java APIs to call JavaScript within WebView, or allows JavaScript to make calls to Java APIs. This allows developers to leverage the best of both worlds.Java EE developers can take advantage of WebView and the JavaScript-Java bridge to allow their HTML clients to seamlessly bypass Web browser’s sandbox to access native system resources, providing a richer user experience.FXMediaPlayerFXMediaPlayer is an application that lets developers check different media functionality in JavaFX, such as synthesizer or support for HTTP Live Streaming (HLS). This demo shows how developers can embed video content in their Java applications. JavaFX leverages the underlying video (e.g., H.264) and audio (e.g., AAC) codecs on the user’s computer. JavaFX APIs allow developers to interact with the video content (e.g. play/pause, or programmable markers). Some of the latest media features introduced in JavaFX 2.2 include HTTP Live Streaming (HLS). Obviously there is a lot for JavaFX enthusiasts to chew on!

  Read the article

• Win a place at a SQL Server Masterclass with Kimberly Tripp and Paul Randal

  - by Testas

  The top things YOU need to know about managing SQL Server - in one place, on one day - presented by two of the best SQL Server industry trainers!And you could be there courtesy of UK SQL Server User Group and SQL Server Magazine! This week the UK SQL Server User Group will provide you with details of how to win a place at this must see seminar   You can also register for the seminar yourself at:www.regonline.co.uk/kimtrippsql More information about the seminar   Where: Radisson Edwardian Heathrow Hotel, London When: Thursday 17th June 2010 This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance. The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will:·         Debunk many of the ingrained misconceptions around SQL Server's behaviour   ·         Show you disaster recovery techniques critical to preserving your company's life-blood - the data   ·         Explain how a common application design pattern can wreak havoc in the database ·         Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Please Note: Agenda may be subject to changeSessions AbstractsKEYNOTE: Bridging the Gap Between Development and Production  Applications are commonly developed with little regard for how design choices will affect performance in production. This is often because developers don't realize the implications of their design on how SQL Server will be able to handle a high workload (e.g. blocking, fragmentation) and/or because there's no full-time trained DBA that can recognize production problems and help educate developers. The keynote sets the stage for the rest of the day. Discussing some of the issues that can arise, explaining how some can be avoided and highlighting some of the features in SQL 2008 that can help developers and DBAs make better use of SQL Server, and troubleshoot when things go wrong.  SESSION ONE: SQL Server MythbustersIt's amazing how many myths and misconceptions have sprung up and persisted over the years about SQL Server - after many years helping people out on forums, newsgroups, and customer engagements, Paul and Kimberly have heard it all. Are there really non-logged operations? Can interrupting shrinks or rebuilds cause corruption? Can you override the server's MAXDOP setting? Will the server always do a table-scan to get a row count? Many myths lead to poor design choices and inappropriate maintenance practices so these are just a few of many, many myths that Paul and Kimberly will debunk in this fast-paced session on how SQL Server operates and should be managed and maintained. SESSION TWO: Database Recovery Techniques Demo-Fest Even if a company has a disaster recovery strategy in place, they need to practice to make sure that the plan will work when a disaster does strike. In this fast-paced demo session Paul and Kimberly will repeatedly do nasty things to databases and then show how they are recovered - demonstrating many techniques that can be used in production for disaster recovery. Not for the faint-hearted! SESSION THREE: GUIDs: Use, Abuse, and How To Move Forward Since the addition of the GUID (Microsoft’s implementation of the UUID), my life as a consultant and "tuner" has been busy. I’ve seen databases designed with GUID keys run fairly well with small workloads but completely fall over and fail because they just cannot scale. And, I know why GUIDs are chosen - it simplifies the handling of parent/child rows in your batches so you can reduce round-trips or avoid dealing with identity values. And, yes, sometimes it's even for distributed databases and/or security that GUIDs are chosen. I'm not entirely against ever using a GUID but overusing and abusing GUIDs just has to be stopped! Please, please, please let me give you better solutions and explanations on how to deal with your parent/child rows, round-trips and clustering keys! SESSION 4: Essential Database MaintenanceIn this session, Paul and Kimberly will run you through their top-ten database maintenance recommendations, with a lot of tips and tricks along the way. These are distilled from almost 30 years combined experience working with SQL Server customers and are geared towards making your databases more performant, more available, and more easily managed (to save you time!). Everything in this session will be practical and applicable to a wide variety of databases. Topics covered include: backups, shrinks, fragmentation, statistics, and much more! Focus will be on 2005 but we'll explain some of the key differences for 2000 and 2008 as well.    Speaker Biographies     Paul S.Randal  Kimberley L. Tripp Paul and Kimberly are a husband-and-wife team who own and run SQLskills.com, a world-renowned SQL Server consulting and training company. They are both SQL Server MVPs and Microsoft Regional Directors, with over 30 years of combined experience on SQL Server. Paul worked on the SQL Server team for nine years in development and management roles, writing many of the DBCC commands, and ultimately with responsibility for core Storage Engine for SQL Server 2008. Paul writes extensively on his blog (SQLskills.com/blogs/Paul) and for TechNet Magazine, for which he is also a Contributing Editor. Kimberly worked on the SQL Server team in the early 1990s as a tester and writer before leaving to found SQLskills and embrace her passion for teaching and consulting. Kimberly has been a staple at worldwide conferences since she first presented at TechEd in 1996, and she blogs at SQLskills.com/blogs/Kimberly. They have written Microsoft whitepapers and books for SQL Server 2000, 2005 and 2008, and are regular, top-rated presenters worldwide on database maintenance, high availability, disaster recovery, performance tuning, and SQL Server internals. Together they teach the SQL MCM certification and throughout Microsoft.In their spare time, they like to find frogfish in remote corners of the world.  

  Read the article

• Community Conversation

  - by ultan o'broin

  Applications User Experience members (Erika Webb, Laurie Pattison, and I) attended the User Assistance Europe Conference in Stockholm, Sweden. We were impressed with the thought leadership and practical application of ideas in Anne Gentle's keynote address "Social Web Strategies for Documentation". After the conference, we spoke with Anne to explore the ideas further. Applications User Experience Senior Director Laurie Pattison (left) with Anne Gentle at the User Assistance Europe Conference In Anne's book called Conversation and Community: The Social Web for Documentation, she explains how user assistance is undergoing a seismic shift. The direction is away from the old print manuals and online help concept towards a web-based, user community-driven solution using social media tools. User experience professionals now have a vast range of such tools to start and nurture this "conversation": blogs, wikis, forums, social networking sites, microblogging systems, image and video sharing sites, virtual worlds, podcasts, instant messaging, mashups, and so on. That user communities are a rich source of user assistance is not a surprise, but the extent of available assistance is. For example, we know from the Consortium for Service Innovation that there has been an 'explosion' of user-generated content on the web. User-initiated community conversations provide as much as 30 times the number of official help desk solutions for consortium members! The growing reliance on user community solutions is clearly a user experience issue. Anne says that user assistance as conversation "means getting closer to users and helping them perform well. User-centered design has been touted as one of the most important ideas developed in the last 20 years of workplace writing. Now writers can take the idea of user-centered design a step further by starting conversations with users and enabling user assistance in interactions." Some of Anne's favorite examples of this paradigm shift from the world of traditional documentation to community conversation include: * Writer Bob Bringhurst's blog about Adobe InDesign and InCopy products and Adobe's community help * The Microsoft Development Network Community Center * ·The former Sun (now Oracle) OpenDS wiki, NetBeans Ruby and other community approaches to engage diverse audiences using screencasts, wikis, and blogs. * Cisco's customer support wiki, EMC's community, as well as Symantec and Intuit's approaches * The efforts of Ubuntu, Mozilla, and the FLOSS community generally Adobe Writer Bob Bringhurst's Blog Oracle is not without a user community conversation too. Besides the community discussions and blogs around documentation offerings, we have the My Oracle Support Community forums, Oracle Technology Network (OTN) communities, wiki, blogs, and so on. We have the great work done by our user groups and customer councils. Employees like David Haimes are reaching out, and enthusiastic non-employee gurus like Chet Justice (OracleNerd), Floyd Teter and Eddie Awad provide great "how-to" information too. But what does this paradigm shift mean for existing technical writers as users turn away from the traditional printable PDF manual deliverables? We asked Anne after the conference. The writer role becomes one of conversation initiator or enabler. The role evolves, along with the process, as the users define their concept of user assistance and terms of engagement with the product instead of having it pre-determined. It is largely a case now of "inventing the job while you're doing it, instead of being hired for it" Anne said. There is less emphasis on formal titles. Anne mentions that her own title "Content Stacker" at OpenStack; others use titles such as "Content Curator" or "Community Lead". However, the role remains one essentially about communications, "but of a new type--interacting with users, moderating, curating content, instead of sitting down to write a manual from start to finish." Clearly then, this role is open to more than professional technical writers. Product managers who write blogs, developers who moderate forums, support professionals who update wikis, rock star programmers with a penchant for YouTube are ideal. Anyone with the product knowledge, empathy for the user, and flair for relationships on the social web can join in. Some even perform these roles already but do not realize it. Anne feels the technical communicator space will move from hiring new community conversation professionals (who are already active in the space through blogging, tweets, wikis, and so on) to retraining some existing writers over time. Our own research reveals that the established proponents of community user assistance even set employee performance objectives for internal content curators about the amount of community content delivered by people outside the organization! To take advantage of the conversations on the web as user assistance, enterprises must first establish where on the spectrum their community lies. "What is the line between community willingness to contribute and the enterprise objectives?" Anne asked. "The relationship with users must be managed and also measured." Anne believes that the process can start with a "just do it" approach. Begin by reaching out to existing user groups, individual bloggers and tweeters, forum posters, early adopter program participants, conference attendees, customer advisory board members, and so on. Use analytical tools to measure the level of conversation about your products and services to show a return on investment (ROI), winning management support. Anne emphasized that success with the community model is dependent on lowering the technical and motivational barriers so that users can readily contribute to the conversation. Simple tools must be provided, and guidelines, if any, must be straightforward but not mandatory. The conversational approach is one where traditional style and branding guides do not necessarily apply. Tools and infrastructure help users to create content easily, to search and find the information online, read it, rate it, translate it, and participate further in the content's evolution. Recognizing contributors by using ratings on forums, giving out Twitter kudos, conference invitations, visits to headquarters, free products, preview releases, and so on, also encourages the adoption of the conversation model. The move to conversation as user assistance is not free, but there is a business ROI. The conversational model means that customer service is enhanced, as user experience moves from a functional to a valued, emotional level. Studies show a positive correlation between loyalty and financial performance (Consortium for Service Innovation, 2010), and as customer experience and loyalty become key differentiators, user experience professionals cannot explore the model's possibilities. The digital universe (measured at 1.2 million petabytes in 2010) is doubling every 12 to 18 months, and 70 percent of that universe consists of user-generated content (IDC, 2010). Conversation as user assistance cannot be ignored but must be embraced. It is a time to manage for abundance, not scarcity. Besides, the conversation approach certainly sounds more interesting, rewarding, and fun than the traditional model! I would like to thank Anne for her time and thoughts, and recommend that all user assistance professionals read her book. You can follow Anne on Twitter at: http://www.twitter.com/annegentle. Oracle's Acrolinx IQ deployment was used to author this article.

  Read the article

• SQL SERVER – Step by Step Guide to Beginning Data Quality Services in SQL Server 2012 – Introduction to DQS

  - by pinaldave

  Data Quality Services is a very important concept of SQL Server. I have recently started to explore the same and I am really learning some good concepts. Here are two very important blog posts which one should go over before continuing this blog post. Installing Data Quality Services (DQS) on SQL Server 2012 Connecting Error to Data Quality Services (DQS) on SQL Server 2012 This article is introduction to Data Quality Services for beginners. We will be using an Excel file Click on the image to enlarge the it. In the first article we learned to install DQS. In this article we will see how we can learn about building Knowledge Base and using it to help us identify the quality of the data as well help correct the bad quality of the data. Here are the two very important steps we will be learning in this tutorial. Building a New Knowledge Base  Creating a New Data Quality Project Let us start the building the Knowledge Base. Click on New Knowledge Base. In our project we will be using the Excel as a knowledge base. Here is the Excel which we will be using. There are two columns. One is Colors and another is Shade. They are independent columns and not related to each other. The point which I am trying to show is that in Column A there are unique data and in Column B there are duplicate records. Clicking on New Knowledge Base will bring up the following screen. Enter the name of the new knowledge base. Clicking NEXT will bring up following screen where it will allow to select the EXCE file and it will also let users select the source column. I have selected Colors and Shade both as a source column. Creating a domain is very important. Here you can create a unique domain or domain which is compositely build from Colors and Shade. As this is the first example, I will create unique domain – for Colors I will create domain Colors and for Shade I will create domain Shade. Here is the screen which will demonstrate how the screen will look after creating domains. Clicking NEXT it will bring you to following screen where you can do the data discovery. Clicking on the START will start the processing of the source data provided. Pre-processed data will show various information related to the source data. In our case it shows that Colors column have unique data whereas Shade have non-unique data and unique data rows are only two. In the next screen you can actually add more rows as well see the frequency of the data as the values are listed unique. Clicking next will publish the knowledge base which is just created. Now the knowledge base is created. We will try to take any random data and attempt to do DQS implementation over it. I am using another excel sheet here for simplicity purpose. In reality you can easily use SQL Server table for the same. Click on New Data Quality Project to see start DQS Project. In the next screen it will ask which knowledge base to use. We will be using our Colors knowledge base which we have recently created. In the Colors knowledge base we had two columns – 1) Colors and 2) Shade. In our case we will be using both of the mappings here. User can select one or multiple column mapping over here. Now the most important phase of the complete project. Click on Start and it will make the cleaning process and shows various results. In our case there were two columns to be processed and it completed the task with necessary information. It demonstrated that in Colors columns it has not corrected any value by itself but in Shade value there is a suggestion it has. We can train the DQS to correct values but let us keep that subject for future blog posts. Now click next and keep the domain Colors selected left side. It will demonstrate that there are two incorrect columns which it needs to be corrected. Here is the place where once corrected value will be auto-corrected in future. I manually corrected the value here and clicked on Approve radio buttons. As soon as I click on Approve buttons the rows will be disappeared from this tab and will move to Corrected Tab. If I had rejected tab it would have moved the rows to Invalid tab as well. In this screen you can see how the corrected 2 rows are demonstrated. You can click on Correct tab and see previously validated 6 rows which passed the DQS process. Now let us click on the Shade domain on the left side of the screen. This domain shows very interesting details as there DQS system guessed the correct answer as Dark with the confidence level of 77%. It is quite a high confidence level and manual observation also demonstrate that Dark is the correct answer. I clicked on Approve and the row moved to corrected tab. On the next screen DQS shows the summary of all the activities. It also demonstrates how the correction of the quality of the data was performed. The user can explore their data to a SQL Server Table, CSV file or Excel. The user also has an option to either explore data and all the associated cleansing info or data only. I will select Data only for demonstration purpose. Clicking explore will generate the files. Let us open the generated file. It will look as following and it looks pretty complete and corrected. Well, we have successfully completed DQS Process. The process is indeed very easy. I suggest you try this out yourself and you will find it very easy to learn. In future we will go over advanced concepts. Are you using this feature on your production server? If yes, would you please leave a comment with your environment and business need. It will be indeed interesting to see where it is implemented. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Business Intelligence, Data Warehousing, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Data Quality Services, DQS

  Read the article

• Convert DVD to MP4 / H.264 with HD Decrypter and Handbrake

  - by DigitalGeekery

  Are you looking for a way to convert your DVD collection to high quality MP4 files? Today we are going to take a look at using DVDFab HD Decrypter along with Handbrake to convert DVDs to MP4 using the H.264 codec.  Process Overview Handbrake is a great file conversion application, but it unfortunately can’t handle DVD copy protection. For that we will use DVDFab’s HD Decrypter. HD Decrypter is the always free portion of the DVDFab application. What HD Decrypter will do, is remove the copy protection from your DVD, and copy the Video-TS and Audio-TS folders to your hard drive. Once the copy protection is gone, we will use Handbrake to convert the files to MP4 format with H.264 compression. Note: You’ll get full access to all the options in DVDFab  during the 30 trial period. However, the HD Decrypter is free and will continue to work. Ripping the DVD Install both Handbrake and DVDFab HD Decrypter. (Download links below) Once the applications are installed, place your DVD into your DVD drive and open DVDFab. On the welcome screen, click “Start DVDFab.”   You’ll be prompted to choose your region. Click “OK.” The disc is analyzed and opened… You’ll be brought to the main interface. Make sure you have the Full Disc option selected at the left panel and “Copy DVD-Video (VIDEO_TS folder) is selected. Click “Start.” Don’t be confused by the “DVD to DVD” option pop up. We won’t actually be burning to DVD. The HD Decrypter portion of the DVDFab suite is part of the DVD to DVD option. Click “OK.” The DVD will be ripped to your hard drive. When the copy process is complete, you’ll be prompted to insert media to start the write process. We aren’t going to be burning to disc, so just click Cancel then close out of DVDFab.   Converting to MP4 Now we are ready to convert Open Handbrake and click on the “Source” button at the top left. Select DVD / VIDEO_TS folder from the drop down list. Now we need to browse for the location where DVDFab HD Decrypter copied your movie. By default, that location will be the \DVDFab\Temp\FullDisc directory in your Documents folder. For example, in Windows 7, it would be: C:\Users\%username%\Documents\DVDFab\Temp\FullDisc\[Name of Your DVD] Select the folder, and click “OK.” You may be prompted to set a default path in Handbrake. This is an optional step. Click “OK.” If you’d like to set a default destination folder, Go to Tools on the top menu, select Options. On the General tab, click “Browse” to select a destination output folder. Click “Close” when Finished.   Next, click the dropdown list next to “Title.” Select the title that matches the length of the movie. It’s possible you may have see more than one title with a similar length. If so, consult the DVD information, or a site like IMDB.com, to find the proper movie title length. Select your container under Output Settings. This will be your final output file extension. We will be using MP4 for this example. You also have the option of MKV.   If you didn’t set up a default destination folder, you’ll need to select one by clicking the “Browse” button. You can manually customize the output file name and change the output file extension to .mp4 (Unless you prefer the iPod friendly .m4v extension). Settings There are a variety of custom settings that can be changed either through the tabs listed under Output Settings, or by selecting one of the Presets to the right. If converting exclusively for any of the devices listed in the preset list, simply click on that device and the settings will be automatically applied in the Output Settings tabs. For more Universal (non-Apple) devices or output, select the Normal profile.   For the most part, the presets will suit quite nicely. However, you can further customize settings if you’d like. The Picture tab allows you to tweak the size or cropping region. You must change Anamorphic to Loose or Custom to change the size.   The Video tab allows you to choose your codec. H.264 is the default. You also have the option to choose a target (output) size. The Constant Quality is recommended to be set between 59% – 63%. Anything over 70% will likely result in an output file larger than the input without any improved quality. On the Subtitles tab, you can select an available subtitle from the dropdown list and click “Add” to add it to the output file. When you’ve finished any customizations you are ready to begin the conversion process. Click “Start.” A Command window will open and you can follow the process. You’ll probably want to find something to do in the meantime as the process could take a couple of hours. When the process completes, you’re ready to watch your video.   Although it’s a time consuming process that involves a couple steps, this method will give you high quality H.264 video files. If you want to rip and burn your DVD’s to ISO check out our article on how to rip and convert DVD’s to an ISO image. Links Download DVDFab HD Decrypter (Part of the DVDFab suite) Download Handbrake Similar Articles Productive Geek Tips Enjoy Quick & Easy Unit Conversion with Convert for WindowsConvert Older Excel Documents to Excel 2007 FormatCalculate with Qalculate on LinuxHow To Convert Video Files to MP3 with VLCConvert a Row to a Column in Excel the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >