Search Results

Search found 9944 results on 398 pages for 'plan explorer'.

Page 330/398 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• i7 x980 at 70% speed

  - by Buxley

  Hi we bought a nice computer to use to solve optimization problems. intel i7 X980@3,33 Mhz with 12 Gb of Team Group 1600 MHz ddr3 Ram. When we use Gurobi The Computer uses all 12 cores at maximum in the beginning of the solve. However after a while (about 8 hrs) it all cores jump between 65 and 85% When I solve the same models on an I7 930 all cores are at a near 100% level even after longer solution times. we first thought that the Harddisk was the bottleneck since Gurobi writes out nodefiles after the memorylimit is used. However since the new computer have 12 GB of Ram we put the memorylimit to 7 GB so the solver only used the RAM and still with the same performance in the processor. Any Ideas about the bottleneck? As I said earlier it works at 100% for the first hours or so . Thanks very much for any answers! Our plan was to overclock it but we can't even get it to work at normal speed yet!

  Read the article

• Which program is locking all my executable files?

  - by Tom Wijsman

  When updating any software product, as well as manually trying to replace .exe files, it says that access is denied to the file and in fact the System process is holding a handle to the file when I check it with Process Explorer. This must be a driver or something that is malfunctioning was my first though, but now I wonder how I figure out which driver / program is doing this and why it is so. Unlocker doesn't seem to be working for me, unless someone can tell me how to use it properly other than making it appear a magical wand in the notification area.... This is what Unlocker puts in my event log: The description for Event ID 1060 from source Application Popup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: \??\C:\Program Files (x86)\Unlocker\UnlockerDriver5.sys the message resource is present but the message is not found in the string/message table Upon searching event 1060 I get: <file name> has been blocked from loading due to incompatibility with this system. Perhaps it is because I have 64 bit?

  Read the article

• Hyper-V and attaching physical disks

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• What switch should we use for PCoIP?

  - by Jay R.

  We have a small lab space that seats 10 people and has 20 machines. Each machine is set to 1920x1200 resolution because the user apps are best used at that resolution. Currently the machines are all located close enough to montors that a DisplayPort cable will reach, but the pending lab remodel positions them around 80 feet or more away in racks. Our proposed solution is to use PCoIP. We purchased 10 PCoIP portals and 20 PCoIP host cards. We plan to set up a dedicated network to handle just the PCoIP traffic. After testing just one portal and one host card with a cheap 1G switch from a local office supply store, we were left with less than good impressions about the usefulness in our lab. The framerates were not spectacular and the mouse seemed jerky. Our concern is that we can't get away with the cheap 1G stuff from the store because adding more machines to the switch will just make the user experience worse. What switch would be recommended to best support our PCoIP situation? We will need to plug in at least 30 cables based on just those machines. Is there a particular feature to search for that makes a difference? Is there a switch that works best with PCoIP? Added Info: The reporting webapp for the host card shows maximum bandwidth usage to be 220000 kbps. The average appears to be around 180000 kbps. The reverse direction is much lower, like 15000 kbps.

  Read the article

• Server 2008 email on Event variables

  - by Jeff Miles

  One of the new features of Server 2008 is the ability to attach a task to a specific event in the event logs. One of the actions available is to send an email through a SMTP server. This is working great, however it would be ideal if in the message body, the Event contents could be placed. I have tried using $eventdescription and %eventdescription%, but those are just shots in the dark. Any amount of googling produces no results. Does anyone know if this is possible? Update: Sparks' suggestion below is a step in the right direction I believe, however that method doesn't seem to work for all values. For example, I can pull the RecordID, Severity and Channel as shown, but I can't use the same method to retreive the EventID, or most importantly the description. Here's the raw XML from one event: [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"] [System] [Provider Name="DFSR" /] [EventID Qualifiers="16384"]4412[/EventID] [Level]4[/Level] [Task]0[/Task] [Keywords]0x80000000000000[/Keywords] [TimeCreated SystemTime="2009-05-14T18:18:09.000Z" /] [EventRecordID]45692[/EventRecordID] [Channel]DFS Replication[/Channel] [Computer]servername.domain.com[/Computer] [Security /] [/System] [EventData] [Data]9046C3F4-843E-4A53-B941-4B20764072E5[/Data] [Data]D:\departments\Geomatics\Plan Quality\Data Processing\CG3533017 2009-05-13 KT FIXED[/Data] [Data]D:\departments[/Data] [Data]{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [Data]Departments[/Data] [Data]domain.ca\files\departments[/Data] [Data]B8242CE2-F5EB-47DA-BA5B-1DD2F7EE3AB9[/Data] [Data]DFAA7A54-66CB-4C31-81A0-0F861382C32C[/Data] [Data]CG3533017 2009-05-13-{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [/EventData] [/Event] I have tried using a ValueQuery for EventData, but it returns no data.

  Read the article

• How to delete a file that contains a backslash in the name under Windows 7?

  - by espinchi

  I want to delete a file named workspaces\google-gson-1.7.1-release.zip Yep, it contains a backslash in the name. Here it is: G:\>dir Z_DRIVE Volume in drive G is samsung Volume Serial Number is 48B9-7E1D Directory of G:\Z_DRIVE 04/06/2012 08:09 PM <DIR> . 04/06/2012 08:09 PM <DIR> .. 05/01/2011 02:21 PM 528,016 workspaces\google-gson-1.7.1-release.zip 1 File(s) 528,016 bytes 2 Dir(s) 88,400,478,208 bytes free The first attempt is to just delete it from the Windows Explorer, but it says it can't find the file. Then, I tried from the command line: G:\>del Z_DRIVE\workspaces\google-gson-1.7.1-release.zip The system cannot find the file specified. And, after researching a bit in the internets, I also tried the following, with no luck: G:\>del \\?\G:\Z_DRIVE\workspaces\google-gson-1.7.1-release.zip The system cannot find the file specified. Other than booting from some Linux CD, is there a way to get rid of this file? Update: also tried the following combinations, but the error is the same: G:\>del "\\?\G:\Z_DRIVE\workspaces\google-gson-1.7.1-release.zip" G:\Z_DRIVE>del workspaces\google-gson-1.7.1-release.zip G:\Z_DRIVE>del "workspaces\google-gson-1.7.1-release.zip" G:\Z_DRIVE>del workspaces*google-gson-1.7.1-release.zip

  Read the article

• Hyper-V and attaching physical disks [migrated]

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• Apps won't start after vanilla reboot

  - by Daniel R Hicks

  I had Adobe and Norton nagging me to reboot, so I did that -- clicked Reboot from the Start button. Everything seemed pretty normal as it shut down and came back up, but once up a bunch of apps won't start. The first one I noticed was Firefox. It would flash the disk light normally, but never appear on the screen. Then I tried to bring up an OpenOffice Calc window and same thing. I tried to bring up MS Word, and the splash screen appeared, but never the main screen, and the splash screen just sat there, with a swirly over it. But I tried Solitaire, Notepad++, Paint, and several others, and they popped up just fine. And I'm typing this from IE 8, which, if anything, came up faster than usual. When I try to open up "Network and Sharing Center" the window appears, but nothing appears in it, and eventually it's tagged "not responding". When I kill that window I get (after a delay) "Windows Explorer is not responding", and when I say "OK" the screen resets. I tried rebooting again, and no joy -- same as before. Have done nothing particularly strange on this box, and it's not generally at significant risk for malware. I haven't installed anything new other than the afore-mentioned updates. One other thing: Several minutes after rebooting I get the message "Error: Unable to start Bluetooth Stack Service." The Bluetooth radio is turned on, and I rarely have anything Bluetooth attached, and I don't recall that I've ever seen this message before. Added: Looking at Event Viewer, I'm getting a lot of "The description for Event ID 1 from source xxx cannot be found." Is there any significance to this? Added: I'm looking at restoring from backup, but the procedure is, at best, unclear. Is it sufficient to restore from "Backup and Restore Center", or must I restore from the restore DVD first?

  Read the article

• How to restore Active Desktop if Themes is locked via GPO?

  - by pepoluan

  My company forces Active Desktop upon everybody so that it can display a (monthly-rotated) corporate wallpaper.jpg. Problem is, some computers (including my laptop) somehow experienced some errors resulting in the dreaded "Active Desktop Recovery" screen to show up... and clicking the "Restore My Active Desktop" button always resulted in "Internet Explorer Script Error". Various workarounds I found in the Internet either does not work or requires me to change the theme first to something else... and the latter I can't do because the Desktop Settings screen is locked via GPO. As it happens, due to the nature of the programs I use, I'm granted Administrator-level access on my computer. The question is: How do I fix my situation? Note: I don't need to put on my own wallpaper, but watching the "Active Desktop Recovery" screen (with its BLANK WHITE!!1! OH MY EYES!1!!one!eleven!! background) gets tiresome. I'm quite happy with the corporate wallpaper. I just need to somehow 'recover' my Active Desktop. More information: OS: Windows XP Professional SP3 (yeah, company's too afraid to even experiment with Windows 7) Antivirus: Symantec Endpoint Protection If you need any additional information, feel free to ask.

  Read the article

• Please help me get rid of asmonitor.exe

  - by LCD Fire

  It might be silly and I trully apologize if the question is not apropriate here, but I have really tried and got to nowhere. I have a windows xp startup error which indicates something about asmonitor.exe program from the ActualSpy keylogger. I had installed but removed ActualSpy keylogger using Superantispyware or something close. I have searched the registries and found a asmonitor entry deleted. I looked at startup programs and can not find the asmonitor program. In addition, I searched the c: drive using regular explorer search and searched using ESET NOD32 antivirus. In each case I cannot find the application... I have even looked at startup programs using msinfo32 command. msconfig-startup NOTHING! it drives me crazy! I can't get rid of it. it is still showing up at windows startup! Where do I find this little program? where is it located? I don't want it to keep showing up. I don't want programs that can do it.. or maybe free ones. But I prefer manual solutions. aren't are any?

  Read the article

• File permissions on web server

  - by plua

  I have just read this useful article on files permissions, and I am about to implement a as-strict-as-possible file permissions policy on our webserver. Our situation: we have a web server accessed through sftp by different users from within our company, and we have the general public accessing Apache - sometimes uploading files through PHP. I distinguish folders and files by their use. So based on this reading, here is my plan: All people who need to upload files will have separate users. But all of those users will belong to two groups: uploaders, and webserver. Apache will belong to the group webserver. Directories Permission: 771 Owner: user:uploaders Explanation: to access files in the folder, everybody needs to have execute permission. Only uploaders will be adding/removing files, so they also get r+w permission. Files within the web-root Permission: 664 Owner: user:uploaders Explanation: they will be uploaded and changed by different users, so both owner and group need to have w+r permissions. Webserver needs to only read files, so r permission only. Upload-directories Permission: 771 Owner: user:webserver Explanation: when files need to be uploaded, Apache needs to be able to write to this directory. But I figure it is safer to change the owner to webroot, thus giving Apache sufficient privileges (and all uploaders also belong to this group and will have the same permissions), while safeguarding from "others" writing to this folder. Uploaded files Permission: 664 Owner: user:webserver Explanation: after uploading Apache might need to delete files, but this is no problem because they have w+r permission of the folder. So no need to make this file any more accessible than r access for group. Being not an expert on file permissions, my question is whether or not this is the best possible policy for our situation? Any suggestions welcome.

  Read the article

• Windows 7 - ignore security when reading external drive

  - by w-

  hi, My system hard drive on an XP computer kind of failed (random corrupt sectors). So i got a new harddrive and am trying to recover the files. The filesystem is NTFS. The system i'm trying to use when recovering the files is Windows 7. I'm obviously an admin on this box. The last data i'm trying to recover is stuff in the Documents and Settings folder. I'm using a SATA to a USB cable thingy so that I just plug it in as an External Hard Drive. The problem: In Windows Explorer when i try to copy the data, I keep getting prompted with Security warnings and error messages. It keeps telling me i have to change the owner permissions of the folder and all it's contents. If i tell it to change all the files and folder permissions it takes a really long time because it has to recurse through all the folder contents to change the permissions. Is there a way for me to ignore the file permissions when doing this? thanks

  Read the article

• Windows 7 x64 support for Intel GMA 3650 (or GMA 3600)

  - by Loom

  I recently purchased an Intel D2700 MUD motherboard and I cannot find drivers for the Win7 x64 integrated graphics (Intel GMA 3650 aka PowerVR sgs545). The accompanying CD contains Win7 x32 version only. When I run it I got an error: This computer does not meet the minimum requirements for installing the software. I tried to use online utility Intel Driver Update Utility Graphics. I used Chrome, Firefox, Internet Explorer without success. First, UAC prompt appear, and then endlessly spinning progress-bar with text "Analyzing computer...". The text in UAC prompt is: Program file name: System Requirements Lab Verified publisher: Husdawg, LLC I downloaded this utility (intel_srldetect_4.5.5.0) and started it from my hard disk. I got an error: A network error occured while attempting to read from the file: C:\Users\Loom\Downloads\SystemRequirementsLab_intel_4.5.5.0.msi Standard VGA driver works for this video card but without hardware acceleration: Hardware acceleration is either disabled or not supported by your video card driver, which could slow game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on. Where I can get appropriate driver?

  Read the article

• Server 2008 email on Event variables

  - by Jeff Miles

  One of the new features of Server 2008 is the ability to attach a task to a specific event in the event logs. One of the actions available is to send an email through a SMTP server. This is working great, however it would be ideal if in the message body, the Event contents could be placed. I have tried using $eventdescription and %eventdescription%, but those are just shots in the dark. Any amount of googling produces no results. Does anyone know if this is possible? Update: Sparks' suggestion below is a step in the right direction I believe, however that method doesn't seem to work for all values. For example, I can pull the RecordID, Severity and Channel as shown, but I can't use the same method to retreive the EventID, or most importantly the description. Here's the raw XML from one event: [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"] [System] [Provider Name="DFSR" /] [EventID Qualifiers="16384"]4412[/EventID] [Level]4[/Level] [Task]0[/Task] [Keywords]0x80000000000000[/Keywords] [TimeCreated SystemTime="2009-05-14T18:18:09.000Z" /] [EventRecordID]45692[/EventRecordID] [Channel]DFS Replication[/Channel] [Computer]servername.domain.com[/Computer] [Security /] [/System] [EventData] [Data]9046C3F4-843E-4A53-B941-4B20764072E5[/Data] [Data]D:\departments\Geomatics\Plan Quality\Data Processing\CG3533017 2009-05-13 KT FIXED[/Data] [Data]D:\departments[/Data] [Data]{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [Data]Departments[/Data] [Data]swg.ca\files\departments[/Data] [Data]B8242CE2-F5EB-47DA-BA5B-1DD2F7EE3AB9[/Data] [Data]DFAA7A54-66CB-4C31-81A0-0F861382C32C[/Data] [Data]CG3533017 2009-05-13-{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [/EventData] [/Event] I have tried using a ValueQuery for EventData, but it returns no data.

  Read the article

• How can I read PDFs with e-reader on a Lenovo tablet?

  - by Jack M

  This is my first time using a tablet and I'm totally lost - this must be what computers look like to old people. This is a Lenovo Thinkpad tablet. I don't see a specific model number on it (it was passed down to me second hand). What I'd like to do is read a PDF. I'm fairly certain I successfully transferred the PDF onto the tablet via an SD card, and I noticed this thing has an app called "eReader" on it, so I started that up. All I see are empty bookshelves, and no obvious buttons or settings anywhere. I saw in multiple places that you have to, as one site puts it: ...copy and paste the relevant files into the eBooks folder and they will appear on the eReader shelf for your consumption... But I have no idea how to: Access the file system. Locate the eBooks folder. Copy and paste files. Will I need a file explorer app? If so, how can I install that given that my only method of getting data onto this tablet is an SD card (no wireless internet).

  Read the article

• How to perform this Windows 7 permissions change on many files via GUI or command line

  - by hippietrail

  After using my external hard drive on another Windows 7 computer to tweak photos with Windows Live Photo Gallery then upload them to Facebook I found the modified images were now not visible on the original Windows 7 computer. I'm not sure if the things I tried to get it working subsequently changed anything, but I do know this is the sequence of actions that makes the permissions of the modified files match those of the unmodified files: Right click on broken image file, select "Properties" On the "Security" tab press the "Advanced" button In the "Permissions" tab press the "Continue" button with the shield icon on it Tick the box marked "Include inheritable permissions from this object's parent Click the "Remove" button to remove the only current entry "Type: Allow, Name: Administrators (XYZ\Administrators), Permission: Full control, Inherited From: OK on the "Permissions" tab. OK on the "Security" tab. Now this same procedure does not work at the folder level. It results in "access denied" dialogs. I'm looking for some way to perform this exact modification on all the images I edited on the other computer. I'm happy to use the Windows GUI in Explorer or any other included tools. I'm happy to use the Windows command line. I'd prefer not to use a third-party tool since I'd have to be satisfied it's not doing anything else. I'm not looking for a different way to change permissions to other settings to make an external drive full of photos editable on multiple computers. At least not in this question.

  Read the article

• Out of memory errors but not actually out of memory...

  - by commradepolski

  So, myself and my fellow support techs have been fighting with this issue and we still dont know what the problem is. Lets start off with the system specs: Windows XP 32 bit Corporate (SP2 and SP3) Intel D975XBX2 Mobo 4gb of ram Intel Core 2 Quad Q6600 ATI Radeon HD 3600 - 512mb After a few hours of working on the machine, the end user will begin to see the following symptoms: Out of memory messages Title bars and menus dont draw in properly Problems accessing network resources Problems opening up documents such as MSWord and MSPowerpoint and text files Problems opening up explorer windows General instability We have looked at task manager while this issue was occurring, and all indicators, like PF usage, threads, handles, etc. are normal. We have been having trouble pinpointing the root cause of this issue. It is also not situated with one user, it affects 8-10. So far we have tried: Resetting CMOS (Waiting to see results) Replacing video card (didnt help) Windows updates (didnt help) Updating network drivers (didnt help) Switching user from 1gbps to 100mbps network connection (awaiting results) Swapping the affected user's hardware (waiting for results) Increasing desktop heap size (helped for a bit but then the issue became more frequent) Applying the /3 switch to XP (didnt help) Increasing and decreasing and setting PF to system managed state (didnt help) We did have a power outage at the office a couple weeks ago, and all these issues became more frequent. Prior to the power outage it may take a week or so for the users to experience the issues but since the power outage it takes 3-4 hours or less. We havent had reports of the above issues causing BSODs, although that would be easier to diagnose :). Any help is greatly appreciated.

  Read the article

• VOIP and internet connection speeds [cable vs. fiber]

  - by microchasm

  Our office is migrating to IP telephony. We have less than 10 employees that will be using the phones. We currently have cable internet, and they just bumped the speeds: There is a data center that was just recently built in our building, and we were considering co-lo'ing there in the near future. As a result, they offered us access to their triple-redundant internet, but it's quite expensive. They are offering 3mbps committed with up to 10mbps burst for $250/month (discounted). We pay ~$120 for our cable (which the plan was to keep--at least for TV). I want the phone system and LAN to be as separate as possible. Was thinking about keeping the cable for LAN, and using the other connection for the phones (until I saw the price). Now I'm thinking it might make sense to add on to our existing cable setup, and change our phone to only have DSL as a backup for the cable. Is there any real benefit to the fiber? Especially for the price? Any other suggestions or ideas? Thanks.

  Read the article

• Diagnosing RAM issues

  - by TaylorND

  I have an old Acer Aspire T180 desktop. The specs are as follows: AMD Athlon 64 3800+ 2.4GHz 1GB DDR2 SDRAM 160GB DVD-Writer (DVD±R/±RW) Gigabit Ethernet 17" Active Matrix TFT Color LCD Windows Vista Home Basic Mini-tower AST180-UA381B According to the information in the computer's documentation the computer comes with 1 GB of RAM. It has two DDR2 SDRAM sticks. I used to have Windows Vista installed. Then I removed it and install Windows 7, and now I have since removed Windows 7 and installed Windows XP. According to Windows XP with both RAM sticks in the computer has 768 MB. Isn't this supposed to be 1 GB of RAM or 1024 MB of RAM? Is the amount of RAM installed only partly used by the Operating System? Is there's something I'm missing? If I remove either one of the RAM sticks I'm left with 448 MB of RAM. These numbers don't seem to add up. If each of the RAM sticks contains at least 448 MB of RAM shouldn't they (both being in) provide 896 MB of RAM. Even then, isn't that less than a GB of RAM? I'm not too experienced in hardware so I thought this would be the best place to ask. As a follow up question, is the RAM I have enough to run/multitask with Windows XP efficiently? I plan to do a lot of computing with the system (although not gaming), should I invest in more RAM?

  Read the article

• Windows 7 does not detect my new hard drive?

  - by jasondavis

  I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

  Read the article

• OpenOffice Vs Microsoft Office 2007/2010

  - by Moody Tech

  I have been asked to summarise the pros and cons in connection with the choices between Microsoft Office Vs OpenOffice. I have a broad idea of what needs to be said. However I would like to open a discussion here and have a single place to go to when the time comes to give the summary to management. There are obvious points of contention: For me the lack of compliance with Group Policy is a major concern [Default save location/visibility of C:/Visibility of files and folders on the HDD] However I am sure that functionality and compatibility will be the prime mover. We are looking at making major savings by reducing our commitment to Microsoft licensing. So what are your experiences? What happens when there are no direct equivalents? [Word has a close match in OpenOffice, but a database solution match is not as close, neither is an Outlook [connecting to Exchange Server and downloading all calendars, shared calendars, scheduled events, for Exchange will still exist after the move to OpenSource solutions] In summary then: What do you see as: The benefits of this plan? How do you see the problems being manifest? Discuss.... Many thanks.

  Read the article

• Setting up logging for a remote backup script

  - by Brian Dainis

  So I wrote up a short script that I am planning to run via a cron job daily to package up my site files and send them to a remote location. I also plan to incorporate DB dumps, but I have not gotten that far yet. My issue today however is that Im am uncertain how to log the output of each command for errors, warnings, or other pertinent information the command may output. I would also like to install sometype of fail safe so if something goes horribly wrong the script will stop dead in its tracks and notify me via email or something. Ok the email thing is not as critical, but would be nice. Does anybody have any ideas for that? Here is what I have so far. By the way, both servers are CentOS 6.2 running standard LAMP. #!/bin/sh ################################# ### Set Vars ################################# THEDATE=`date +%m%d%y%H%M` ################################# ### Create Archives ################################# tar -cf /root/backups/files/server_BAK_${THEDATE}.tar -C / var/www/vhosts gzip /root/backups/files/server_BAK_${THEDATE}.tar ################################# ### Send Data to Remote Server ################################# scp /root/backups/files/server_BAK_${THEDATE}.tar.gz user@host:/home/bak1/ftp/backups/ ################################# ### Remove Data from this Server ################################# rm -rf /root/backups/files/server_BAK_${THEDATE}.tar.gz

  Read the article

• Installing a new Motherboard in a HP xw6200 case

  - by thing2k

  I have a HP xw6200 Workstation, that is rather long in the tooth, and with 2 physical CPUs, it is quite inefficient. So, the plan was to upgrade the internals. Nothing special: AMD Athlon II X4 640 ASUS M4A78KT-M LE (mATX) 2x 2GB DDR3 1333MHz RAM. 3p under my £150 budget The issues: The pin connector for the front panel isn't a good fit, but I can trim it to size. The PSU has a 8-Pin Power connector, unsurprisingly, the new board has a 4 pin socket. The pins do line up, but I would have to cut it in half to fit. Finally, due to the weight of heat-sinks, they are screwed directly into the case. It turns out that these screws also lock the motherboard in place. As to remove it, you remove the heat-sinks, slide the motherboard across and lift it out. I tested the new board for fit, and while it slots in fine, it's not secure. There is nowhere to screw the board down, it is just held in place with plastic standoffs. The only idea I had, was to wedging something between the side of the motherboard and part of the case. Any suggestions?

  Read the article

• Noisily rendered text in Firefox

  - by Notinlist

  It came to me in a week or so that certain pages (Facebook, StrackOverflow, some news sites) have text rendering errors in Firefox. As a workaround if I refresh the page, or simply select and deselect the buggy text, the unpleasant effect disappears. I don't have this effect in Internet Explorer or in any of my desktop applications. Windows 7 Pro 64bit (fresh) Firefox 19.0.2 (fresh) Ati Radeon HD 4600 Series (fresh drivers) Thanks for the help in advance! Update 1/2 I have only three addons: Forecastfox, Hungarian spell checking dictionary and Quick locale switcher. The latter two are installed after the effect appeared. I disabled the first individually and did not helped. But if I start my firefox with disabled addons I cannot reproduce the error. As far as I know this mode does not mean disabled plugins, which I do have (Adobe Acrobat, Citrix ICA Client, Google Earth plugin, Google update, Java Deployment Toolkit 6, MS Office 2010, MS Windows Media Player Firefox, Shockwave Flash, Silverlight, VLC Web). Update 2/2 If I disable all plugins and extensions I still have the problem. If I start Firefox with disabled addons then I cannot reproduce the problem.

  Read the article

• 2 Computers, same network, different outgoing speeds when uploading to internet?

  - by user117339

  I have 2 work machines in my office, a PowerMac G5 and a MacBook Air. Both behind an IPCop firewall. The PowerMac is connected through a gigabit switch, the MacBook Air is connected through a Netgear 802.11g access point that is then plugged into the gigabit switch. There is also a FreeNAS box, both machines are able to read and write files to it at close to their pipe speeds. The main problem is when I am trying to upload files to the internet at large. The G5 is only hitting 0.1 - 0.25 Mbps. The Macbook is able to hit 2-3 Mbps. The setup (G5 / IPCop / Network) has been the same for 5 years. The issues with the internet speed started about 3 months ago. I hadn't tested on the Macbook at this point. I had complained to the ISP, they said their modem needed a firmware update, did that nothing changed. Reset IPCop, turned off squid, etc. No changes. The ISP switched the office over to a better plan with a theoretical 6 Mbps up, still no change. At this point I tried testing the Macbook, and lo and behold there's the speed. But why? I have tried changing out everything, cables, switches, using another ethernet port on the G5, wiping the system, using DHCP, using manual IPs, changing DNS servers, etc. Nothing works. I figured that if there was something horribly wrong with the network, then internally I would find a similar issue, but that is perfect. iperf, ping, etc show no dropped packets and near saturation of the internal network. I'm at a loss as to what the heck is going on. Any ideas would be appreciated! Below are some screenshots of speedtest.net: G5: Macbook Air:

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >