Search Results

Search found 10169 results on 407 pages for 'port'.

Page 331/407 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

• What Wireless Router/ADSL Modem to get? N-band a must!!

  - by JJarava

  I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

  Read the article

• How can I find the USB wireless adapter into the dmesg log file?

  - by AndreaNobili

  I am pretty new in Linux (RaspBian for RaspBerry Pi but I think that there are not difference) and I have to install an USB wireless network adapter (the product is the TP-Link TL-WN725N, this one: http://www.tp-link.it/products/details/?model=TL-WN725N ) Now, I think that this is not automatically recognized by my system because if I execute ifconfig command I obtain the following output: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34195 (33.3 KiB) TX bytes:89578 (87.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So now it see only my ethernet network interface and not the wireless. So I was thinkig to try to see into the dmesg, but I don't know what have I to see and how to select it into the dmesg output. For example by the following command I can see the line of the dmesg log file relate to my ethernet port: pi@raspberrypi ~ $ cat /var/log/dmesg |grep -i eth [ 3.177620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:9f:b0 [ 18.030389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 19.642167] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 But what can I try to search for the USB wireless adapter? Tnx

  Read the article

• What are useful .screenrc settings?

  - by gyaresu

  Basically like some of my own that I've posted below. I'm looking for added functionality to the programme 'screen'. At the very least have a look at the last line for a fantastic 'menu bar' at the bottom of a screen session. ## gyaresu's .screenrc 2008-03-25 # http://delicious.com/search?p=screenrc # Don't display the copyright page startup_message off # tab-completion flash in heading bar vbell off # keep scrollback n lines defscrollback 1000 # Doesn't fix scrollback problem on xterm because if you scroll back # all you see is the other terminals history. # termcapinfo xterm|xterms|xs|rxvt ti@:te@ # These will let you use bind -c selectHighs 0 select 10 #these three commands are bind -c selectHighs 1 select 11 #added to the command-class bind -c selectHighs 2 select 12 #selectHighs bind -c selectHighs 3 select 13 bind -c selectHighs 4 select 14 bind -c selectHighs 5 select 15 bind - command -c selectHighs #bind the hyphen to #command-class selectHighs screen -t rtorrent 0 rtorrent #screen -t tunes 1 ncmpc --host=192.168.1.4 --port=6600 #was for connecting to MPD music server. screen -t stuff 1 screen -t irssi 2 irssi screen -t dancing 4 screen -t python 5 python screen -t giantfriend 6 these_are_ssh_to_server_scripts.sh screen -t computerrescue 7 these_are_ssh_to_server_scripts.sh screen -t BMon 8 bmon -p eth0 screen -t htop 9 htop screen -t hellanzb 10 hellanzb screen -t watching 3 #screen -t interactive.fiction 8 #screen -t hellahella 8 paster serve --daemon /home/gyaresu/downloads/hellahella/hella.ini shelltitle "$ |bash" # THIS IS THE PRETTY BIT #change the hardstatus settings to give an window list at the bottom of the ##screen, with the time and date and with the current window highlighted hardstatus alwayslastline #hardstatus string '%{= mK}%-Lw%{= KW}%50>%n%f* %t%{= mK}%+Lw%< %{= kG}%-=%D %d %M %Y %c:%s%{-}' hardstatus string '%{= kG}[ %{G}%H %{g}][%= %{= kw}%?%-Lw%?%{r}(%{W}%n*%f%t%?(%u)%?%{r})%{w}%?%+Lw%?%?%= %{g}][%{B} %d/%m %{W}%c %{g}]'

  Read the article

• arp requests are sent continuously and my linux machine disconnected to the world

  - by sees

  I have the following problem and really need your help I'm implementing a small server to receive request from client on port 18999(just sample) using TCP socket. When I tested my server by using a lot of requests from a tablet through a router, I got the ARP problem(?) My net work just like: TABLET <------- WIRELESS ROUTER <------- MY SERVER (LINUX) Problems: 1. Can not connect to my Linux any more ( telnet, ping v.v...unreachable) 2. I use serial cable to connect to my Linux machine and use Wiresharp (from Windows) to catch the send message from Linux. It says that Linux keeps sending out continuously every 3 seconds ARP messages like the following: xx:xx:99:77:ff:69 ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.10.2? Tell 192.168.10.3 In the above message: xx:xx:99:77:ff:69 my Linux MAC address 192.168.10.2 my Tablet address 192.168.10.3 my Linux IP address Can you help me figure out the problem? Or tell me the way to detect the problem and reset the network back to normal (maybe restart Linux but I want to detect problem and restart automatically) UPDATE: 1. The above network works normally if tablet sends messages to my LINUX in normal speed (but also down after 48 hours) 2. The router works again after I unplugged my Linux ethernet cable (RJ45) from router. 3. The wireless network still works ( I can browser the router page from tablet) 4. When I use: ifconfig down then ifconfig up , the Linux restarts (?????????)

  Read the article

• IP address from a MAC address

  - by acermate433s

  I'm writing a class to integrate a POS card reader device to our software. In order for it to work I must know what IP it's using. We were given some sample code by the service provider and the way they do this is they open a website (http://www.ebizchargeemv.com/getip.php?mac={MAC address of device}) and it would return the IP address of the device. The device I'm using is a POSLynx220 Mini. It has an ethernet port that connects to the internet to communicate with the service provider. I send TCP data to it and the device then controls a PIN pad that prompts a client to swipe his card. It's probably a mini computer that communicates with the service provider and uses the PIN pad as its input device. Just being curious but how did they implement this? Are they implementing it using ARP? I'm planning on not using their website to determine the IP of the device. I've seen some code that uses ARP but using executing ARP in one of the PC didn't detect the POS device.

  Read the article

• Liferay - Verify each node in a cluster

  - by Schrute

  In this example, I have two clustered instances of Liferay using bundled Tomcat running, using cluster link and shared documents. Let's say the name of the public community is fubar and friendy URL used is fubar.lipsum.com. Let's say the ports listening on each server is 8080. If I go to both server1:8080 or server2:8080 I will get the default page for Liferay. How can I test fubar.lipsum.com on each node by using the backend server, so I can verify each server? If I test it, it just goes to the load balancer, I wish there was a way to append to the backend connection to bring it up. I can add the friendly URL to my local machines hosts file and this seems to kinda work, but then once something is called in the application, it tries to go out again from the backend server and then uses SSL and then we have problems. I think I may be able to do port forwarding, but this seems like a basic thing we should be able to do and what I've found so far in the admin docs has not helped. Using the option to print the server name in the page details isn't an option either.

  Read the article

• Unable to logon using terminal server connection

  - by satch

  I have several W2K3 SP2 servers, admin TS enabled. I discovered this morning, I was unable to logon into some of them. I've a couple of Citrix servers in different farms, a SAP (IA64) app server and a cvs server. All of them show same sympthoms; remote connections are refused. I've been able to logon locally, and terminal server service is up, there are no users (so connections are not depleted). There are no errors in log in most servers. One of the Citrix ones, reported following errors: Event ID 50 Source TermDD Type Error Description The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client. and Event ID 1006 Source TermService Type Error Description The terminal server received large number of incomplete connections. The system may be under attack. Anyway, I suppose these errors appear because server isn't working, and Citrix users try to logon massively. (I nmap'ed server and port seems up). I've solved this problem rebooting before, but with so many servers affected it seems like a crappy workaround. Any idea about troubleshooting it properly? Thanks in advance

  Read the article

• How to restrict postfix send limited email with policyd v2?

  - by Shalini Tripathi

  I have installed cluebringer-2.0.7 for postfix and enabled below lines in the main.cf file of postfix. But I could not see any policy working smtpd_recipient_restrictions = permit_mynetworks permit_sasl_authenticated reject_unauth_destination check_policy_service inet:127.0.0.1:10031 smtpd_end_of_data_restrictions=check_policy_service inet:127.0.0.1:10031 To check further I enabled logging in policyd and its only shows below logs and there is no logs getting populated when I send new emails.. [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: Process Backgrounded [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: Policyd v2 / Cluebringer - v2.0.7 [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: Initializing system modules. [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: System modules initialized. [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: Module load started... [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = AccessControl: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = CheckHelo: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = CheckSPF: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = Greylisting: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = Quotas: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = Protocol(Postfix): enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = Protocol(Bizanga): enabled [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: Module load done. [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: 2012/06/12-21:18:50 cbp (type Net::Server::PreFork) starting! pid(13949) [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: Binding to TCP port 10031 on host * [2012/06/12-21:18:50 - 13949] [CORE] WARNING: Group Not Defined. Defaulting to EGID '0 10 6 4 3 2 1 0' [2012/06/12-21:18:50 - 13949] [CORE] WARNING: User Not Defined. Defaulting to EUID '0' Do I need to do anymore settings for postfix to listen on policyd???Please help

  Read the article

• Trouble with IIS SMTP relaying to Gmail

  - by saille

  I appreciate that similar questions have been asked about how to setup SMTP relaying with IIS's virtual SMTP server. However I'm still completely stumped on this problem. Here's the setup: IIS 6.0 SMTP server running on Win2k3 box with a NAT'ed IP. Company uses Gmail for all email services. An app on the box needs to send email, so normally we'd just set the app up to talk to smtp.gmail.com directly, but this app doesn't support TLS. Easy, we just setup a local SMTP relay right? So I thought. What we have done so far: Setup IIS SMTP server to relay to smtp.gmail.com, as per these excellent instructions: http://fmuntean.wordpress.com/2008/10/26/how-to-configure-iis-smtp-server-to-forward-emails-using-a-gmail-account/ The local SMTP relay allows anonymous access. Both the local IP and the loopback IP have been explicitly allowed in the Connection and Relay dialogs. Tried sending email from 2 different apps via the local SMTP server, but failed (the emails end up in the Queue folder, but never get sent). The IIS logs show the conversation with the local app, but zero conversation happening with smtp.gmail.com. The port used by gmail is open outbound, and indeed the apps we have that support TLS can send email directly via smtp.gmail.com, so there is no problem with the network. At this point I changed the smtp settings in IIS SMTP server to use a different external SMTP server and hey-presto, the local apps can send email via local IIS SMTP relay. So smtp.gmail.com fails to work with our IIS SMTP relay, but another 3rd party SMTP service works fine. We need to use smtp.gmail.com, so how to troubleshoot this one?

  Read the article

• How to remap IPs visible from local machine to IPs visible from a machine I have SSH access to?

  - by gooli

  I'm so far out of my depth I don't even know what to google for. There's a server I can connect to via SSH. Via that server I can access other server on its subnet via SSH. What I want to do is be able to access the machines that server has access to directly. Say the server IP is 192.168.7.7 and is the only one in the 192.168.x.x range I have access to. I'd like to configure things in such a way that when I to access say 192.168.7.100 on my machine, the connection will go through an SSH tunnel I open to 192.168.7.7 and out to 192.168.7.100. I would like this to work for any port if at all possible. I know I can set an HTTP proxy and even a SOCKS proxy, but I'm wondering is there is a way to actually remap some of the IP my machine sees to IP only visible from the remote machine. What would this configuration be called? IS this NAT, VPN, IP2IP or something else? How can I set up this on a Windows client box that connects via SSH to a Linux box? Sounds to me like I need to set up some kind of filtering on the network driver or possibly a virtual NIC, but I'm not sure where to go next.

  Read the article

• Bad network performance on KVM guest

  - by Devator

  I have a dedicated server connected to a 1000 Mbit port. However, the Debian guest is only getting half to a 1/4 the speeds: On the node itself (Linux node 2.6.32-279.9.1.el6.x86_64 #1 SMP Tue Sep 25 21:43:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux): wget http://www.bbned.nl/scripts/speedtest/download/file1000mb.bin -O /dev/null --2012-11-11 23:10:11-- http://www.bbned.nl/scripts/speedtest/download/file1000mb.bin Resolving www.bbned.nl... 62.177.144.181 Connecting to www.bbned.nl|62.177.144.181|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1048576000 (1000M) [application/octet-stream] Saving to: â/dev/nullâ 100%[====================================>] 1,048,576,000 100M/s in 10s 2012-11-11 23:10:21 (100 MB/s) - â/dev/nullâ On the guest (Debian 6.0.5, x64: Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux): wget http://www.bbned.nl/scripts/speedtest/download/file1000mb.bin -O /dev/null --2012-11-11 23:10:41-- http://www.bbned.nl/scripts/speedtest/download/file1000mb.bin Resolving www.bbned.nl... 62.177.144.181 Connecting to www.bbned.nl|62.177.144.181|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1048576000 (1000M) [application/octet-stream] Saving to: â/dev/nullâ 100%[=================================================================================================================================================================================================>] 1,048,576,000 16.5M/s in 42s 2012-11-11 23:11:23 (23.8 MB/s) - â/dev/nullâ I use the virtio NIC. I tried some more NICs: e1000 and the Realtek 8139 but those yield even worse results. Anyone has an idea how to improve these speeds?

  Read the article

• Windows server 2008, Dns. I'm confused

  - by Dejan.S

  Hi. I recently setup a window server 2008 server at work. Keep in mind I have never worked with it before:). Background story is I try to host a couple of sites on the server through iis7, I got domains (currently hosted at other hosters for the moment). I want to point the domain NS to my server on all of them. I have read how to setup a DNS on the server, so far so good. now my dns is companyname.com in the server manager I got DNS / companyname.com in there I got ns.comanyname.com, in there I got Host(A) with the server ip now this is where I get confused about how things work with DNS, NS & Host(A). I dont know how to assign(so to speak) the Host(A) to one of my webapps hosted on the iis7, because that is the pointer right?. To leave an example to work with lets say, Hosted.com is hosted on my iis7, on port 81. You don't understand how great full I would be if somebody could explain this confusion. EDIT: Do I need to create a DNS for every site hosted on my server? Or just make a A Host/Record? Thanks guys

  Read the article

• Media Center setup won't complete for watching TV

  - by Robert

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• VNC on Xen failure

  - by BCable

  The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

  Read the article

• PC won't boot after hanging during Windows 8 automatic repair [closed]

  - by Mun

  I've got a custom built PC using an ASUS P5E motherboard and Intel Q6600 CPU. I plugged in my mp3 player to the USB port yesteday, and when I came back to the machine after about an hour or so, the Windows 8 automatic repair message was on the screen. It seemed to stick there for an hour, after which I decided to just hit reset and try and figure out what was going on. However, the machine rebooted to a black screen before even getting to the BIOS, with the monitor lights just blinking indicating there was no signal. Tried powering down completely, waiting a few minutes and then powering back up again with no difference; black screen with monitor lights blinking. Tried leaving it on for a while and then pinging from another machine or accessing it via something like LogMeIn, but everything showed the machine as being offline. There were also no error beeps or anything like that. Also tried unplugging all of the memory and rebooting and that also caused no error beeps. Removed one of the display cards and left the other one in there, and still only a black screen. I'm inclined to think that the motherboard or CPU is fried, but there is no indication of damage on any components and the CPU fan seems to be working fine as it always has, so overheating seems unlikely. It's also plugged into a surge protector. The motherboard also has a green light which still lights up. As everything was still working fine before hitting the reset button during Windows 8 automatic repair screen, at which point everything stopped working, it seems unlikely that this problem is down to component failure. Has anyone else experienced anything like this or have any ideas on what could be causing this behavior?

  Read the article

• really weird DNS problem in Ubuntu {after one month, seems like ISP problem}

  - by OmniWired

  Hello everyone. I been having this random dns problem, in Ubuntu 10.04 and in 10.10 it started about 2 weeks ago after (I believe) an update. Basically when I go to a website randomly I get that the website I'm visiting is not available ("Oops! Google Chrome could not connect to ..." & "This webpage is not available."). I tested with Chromium "7.0.515.0 (58587)" and Firefox minefield (4.0ish) and 3.6.9. I did these 4 things already: /etc/default/grub GRUB_CMDLINE_LINUX="ipv6.disable=1" and this: /etc/sysctl.conf net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 *disabling Chromium DNS pre-fetching *using Google and OpenDNS servers as well as ISP DNS servers. But didn't improve, also no other computers in my network have the same problem. All computer wired to the same router. I'm a software engineer that run out of ideas, please help me. Thanks in advance. UPDATE: some programs (synaptic / firefox update/ vuze(azureus)) say connection refused for the error. Most of the time a second try will fix the "refusal". UPDATE2: I found out with Wireshark, that everytime I have this problem i've got this 192.168.0.10 8.8.8.8 ICMP Destination unreachable (Port unreachable) Confirmed an ISP error. ISP;Speedy Location: Argentina, Buenos Aires (capital Federal) Area.

  Read the article

• Remote Desktop *from* Windows 2008 R2 Server

  - by freefaller

  Summary: how do I create an RDC connection from a Windows 2008 server to another server? Our client will only allow us to connect to their server via a static IP address (which is fair enough), but unfortunately as we're a very small company we don't have one in the office. As a work around, we had the connection working through our old Windows 2003 server (dynamic-cloud from 1and1). .. however we have just rebuilt the server to run under Windows 2008 R2 (don't ask, but it was necessary), and now I simply cannot get the connection working. I have added an "Outbound Rule" to Windows Firewall with Advanced Security (TCP, All local ports, 3389 remote port - I have also tried the other way around). I have added a packet filter IP security rule with the same details. The 1and1 firewall rules (through their online control panel) allows for 3389 TCP and UDP. But it is simply not connecting (yes, the server is definitely on and able to accept connections) with the general error of... Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Is there anything obvious I've missed - or something I can use to find out where the request is being blocked? The new server is using the exact same IP address as before, so I don't believe that would be an issue. Unless it's trying to use an IPv6 address rather than the old IPv4 address that it was before? I apologise that I am not a network person by trade, but I know more than anybody else in my office!!

  Read the article

• Postfix able to receive email but not able to send it

  - by c0mrade

  I had postfix running on my machine(comes with centos minimal), but today I configured it to use my domain for the sake of example this is my domain name example.com . Here is my config : alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 header_checks = regexp:/etc/postfix/header_checks html_directory = no inet_interfaces = all inet_protocols = ipv4 mail_owner = postfix mailbox_size_limit = 1073741824 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man message_size_limit = 10485760 mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = example.com myhostname = mail.example.com mynetworks = 127.0.0.0/8 mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relayhost = smtp.$mydomain sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_banner = $myhostname ESMTP $mail_name smtpd_client_restrictions = permit_mynetworks,reject_unknown_client,permit smtpd_recipient_restrictions = permit_mynetworks,permit_auth_destination,permit_sasl_authenticated,reject unknown_local_recipient_reject_code = 550 I need one email account to be able to send emails (password retrievals etc.). I read today somewhere that if you create unix account postfix will recognize it as email address so if your account username was ant your email would be [email protected]. So I tested that and tried to send email to [email protected] and I successfully received mail. When I try to send the email with ant task script, I'm not able to connect : Failed messages: javax.mail.MessagingException: Could not connect to SMTP host: mail.example.com, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect What am I missing here? Edit I'm able to telnet to localhost : Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 mail.example.com ESMTP Postfix

  Read the article

• how does a computer know which IP address will route information to the internet? [closed]

  - by JohnMerlino

  Possible Duplicate: How does IPv4 Subnetting Work? For example, I have a computer with a Network Inteface Card (NIC) which is an Ethernet card that is connected by Ethernet cables to a router. There is also another computer with a cable that is connected in another port of the router. This is a Belkin router operating over an Ethernet in the LAN. When I connect to serverfault.com, it maps to an IP address. My computer now has a task of connecting to that IP address. But my computer itself cannot connect to the serverfault IP address. Only the router can. So the task of my computer is to find the IP address associated with the node that will do the routing to the public internet. How does my computer know that a particular IP address in the local network belongs to the router, and is not another computer connected to the network? Is this information configured manually in the operating system itself? Somehow my computer must know that it must send ethernet frames to the router with the expectation that the router will then send the packet to a public IP. How does it know to send it to the router? Is the router's ip address stored in my computer like a key/value pair e.g. "router"="192.168.2.6", so that when I put a public ip address, my computer first knows to connect to 192.168.2.6?

  Read the article

• Can I get ethernet out of my Verizon FIOS set-top box?

  - by Tom Hughes

  Setup: my home network is long & skinny, and the FIOS-connected router is all the way at one of the apartment. At the other end, far away (and a floor higher) is my HD TV, which gets a cable-TV signal from a Verizon set-top box that is coax-connected back to the FIOS on-premises equipment. Wi-Fi won't work, the apartment is too stretched out, with old, thick walls and floors. Goal: I think there are three ways to get ethernet back to where the HD TV is: 1) run a cable! this isn't crazy but isn't cheap either (my building won't let me do it, it involves hiring an electrician because the cable would run partly through the public hallway ceiling) 2) split the coax near the TV and put in... a MoCA device? 3) somehow tease the set-top box, which has an RJ-11 (ethernet) port on the back, to give me network access. Question: any other choices? and, is one choice better than the others? #3 is by far the most desirable because it would involve the least wiring -- but I can't find any resources to help make it happen. #2 is a bit scary, I don't want to degrade service to the TV or anywhere else for that matter.

  Read the article

• Setup git repository on gentoo server using gitosis & ssh

  - by ikso

  I installed git and gitosis as described here in this guide Here are the steps I took: Server: Gentoo Client: MAC OS X 1) git install emerge dev-util/git 2) gitosis install cd ~/src git clone git://eagain.net/gitosis.git cd gitosis python setup.py install 3) added git user adduser --system --shell /bin/sh --comment 'git version control' --no-user-group --home-dir /home/git git In /etc/shadow now: git:!:14665:::::: 4) On local computer (Mac OS X) (local login is ipx, server login is expert) ssh-keygen -t dsa got 2 files: ~/.ssh/id_dsa.pub ~/.ssh/id_dsa 5) Copied id_dsa.pub onto server ~/.ssh/id_dsa.pub Added content from file ~/.ssh/id_dsa.pub into file ~/.ssh/authorized_keys cp ~/.ssh/id_dsa.pub /tmp/id_dsa.pub sudo -H -u git gitosis-init < /tmp/id_rsa.pub sudo chmod 755 /home/git/repositories/gitosis-admin.git/hooks/post-update 6) Added 2 params to /etc/ssh/sshd_config RSAAuthentication yes PubkeyAuthentication yes Full sshd_config: Protocol 2 RSAAuthentication yes PubkeyAuthentication yes PasswordAuthentication no UsePAM yes PrintMotd no PrintLastLog no Subsystem sftp /usr/lib64/misc/sftp-server 7) Local settings in file ~/.ssh/config: Host myserver.com.ua User expert Port 22 IdentityFile ~/.ssh/id_dsa 8) Tested: ssh [email protected] Done! 9) Next step. There I have problem git clone [email protected]:gitosis-admin.git cd gitosis-admin SSH asked password for user git. Why ssh should allow me to login as user git? The git user doesn't have a password. The ssh key I created is for the user expert. How this should work? Do I have to add some params to sshd_config?

  Read the article

• How to set up that specific domains are tunneled to another server

  - by Peter Smit

  I am working at an university as research assistant. Often I would like to connect from home to university resources over http or ssh, but they are blocked from outside access. Therefore, they have a front-end ssh server where we can ssh into and from there to other hosts. For http access they advise to set up an ssh tunnel like this ssh -L 1234:proxyserver.university.fi:8080 publicsshserver.university.fi and put the proxy settings of your browser to point to port 1234 All nice and working, but I would not like to let all my other internet traffic go over this proxy server, and everytime I want to connect to the university I have to do this steps again. What would I like: - Set up a ssh tunnel everytime I log in my computer. I have a certificate, so no passwords are needed - Have a way to redirect some wildcard-domains always through the ssh-server first. So that when I type intra.university.fi in my browser, transparently the request is going through the tunnel. Same when I want to ssh into another resource within the university Is this possible? For the http part I think I maybe should set up my own local transparent proxy to have this easily done. How about the ssh part?

  Read the article

• Remote Desktop to Server 2008 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• memcache fast-cgi php apache 2.2 windows 7 creating problems

  - by Ahmad

  hi, i am trying to run memcache, fast-cgi with apache 2.2 + php on a windows 7 machine. if i dont use memcache everything works fine. the moment i disable extension=php_memcache.dll in php.ini everything returns to normal. once i start apache, the apache logs say: [Wed Jan 12 18:19:23 2011] [notice] Apache/2.2.17 (Win32) mod_fcgid/2.3.6 configured -- resuming normal operations [Wed Jan 12 18:19:23 2011] [notice] Server built: Oct 18 2010 01:58:12 [Wed Jan 12 18:19:23 2011] [notice] Parent: Created child process 412 [Wed Jan 12 18:19:23 2011] [notice] Child 412: Child process is running [Wed Jan 12 18:19:23 2011] [notice] Child 412: Acquired the start mutex. [Wed Jan 12 18:19:23 2011] [notice] Child 412: Starting 64 worker threads. [Wed Jan 12 18:19:23 2011] [notice] Child 412: Starting thread to listen on port 80. and after accessing the page [the page just has echo phpinfo()]. i get this error in the error.log [Wed Jan 12 18:20:54 2011] [warn] [client 127.0.0.1] (OS 109)The pipe has been ended. : mod_fcgid: get overlap result error [Wed Jan 12 18:20:54 2011] [error] [client 127.0.0.1] Premature end of script headers: index.php i have php_memcache.dll in my ext directory and httpd.conf is like this: LoadModule fcgid_module modules/mod_fcgid.so FcgidInitialEnv PHPRC "c:/php" FcgidInitialEnv PATH "c:/php;C:/WINDOWS/system32;C:/WINDOWS;C:/WINDOWS/System32/Wbem;" FcgidInitialEnv SystemRoot "C:/Windows" FcgidInitialEnv SystemDrive "C:" FcgidInitialEnv TEMP "C:/WINDOWS/Temp" FcgidInitialEnv TMP "C:/WINDOWS/Temp" FcgidInitialEnv windir "C:/WINDOWS" FcgidIOTimeout 64 FcgidConnectTimeout 32 FcgidMaxRequestsPerProcess 500 <Files ~ "\.php$>" AddHandler fcgid-script .php FcgidWrapper "c:/php/php-cgi.exe" .php </Files> so the problem has to be related to memcache coz if i disable it, fast-cgi seems to be working fine. any possible reasons for this?? the memcache service is running.. i can check it through control panel-services

  Read the article

• Devices on one switch can't see devices on another switch

  - by jockey69

  I have RoadRunner Internet cable service hooked to a Motorola Surfboard modem. This is connected to a 10/100 wireless router (located in the garage). Downstairs, I have a ZyXEL GS-108b gigabit switch connected to one port on the router. From this switch I ran connections to a PS3, DVR, Vonage box and a wireless router (Buffalo AirStation 10/100). The Buffalo AirStation works as a wireless AP for other laptops, iPads and cell phones. Upstairs, I have an Asus gigabit switch connected to a gaming desktop, printer, and a media server on FreeNAS (PS3 Media Server on FreeNAS). The router is configured to assign static IPs to both the PS3 and the media server. Problem - I connect a laptop to the switch downstairs after disabling the wireless, thus making sure that I am accessing internet through the wired connection (and the router in the garage). All my computers, iPads and cell phones are able to connect to the internet without a problem. My PS3 connects to the interent with a wired connection but is unable to access the media server (I get a message that no media server is found). I used a wired laptop downstairs (connected to switch downstairs) but am unable to ping either the PS3 or media server! I may be doing something silly but am at my wits' end. Please help!

  Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >