Search Results

Search found 15966 results on 639 pages for 'connection'.

Page 332/639 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• Upgrade to Xubuntu 11.04 Breaks Wireless

  - by fleamour

  When I tried to connect at my mother's house and then my brother's house; the little connection icon would circle forever before eventually prompting for password. I have triple checked all network keys & then some. Even with my home network I now have to revert to 10.04 LTS Lucid Lynx (dual boot) or wired Ethernet. Not even sure where to start trouble shooting TBH? My card is a Edimax EW-7108PCg PCMCIA card which I bought for it's out the box Linux compatibility. Hardware is an IBM Thinkpad T21.

  Read the article

• Window decoration of emacs23 window on fluxbox is outside screen

  - by mit

  I am starting emacs remotely over an ssh connection. But on the emacs window I cannot find a way to resize or move it. There is no fluxbox title bar visible, and I guess the title bar is above the visible viewport, because emacs starts vertically with more height than the screen has. The lower border of the emacs window is also below the viewport border, so I cannot resize the window. I am starting emacs like this: emacs23 This is the emacs version: This is GNU Emacs 23.1.1 (x86_64-pc-linux-gnu, GTK+ Version 2.20.0) of 2010-03-29 on yellow, modified by Debian The remote system that runs emacs is 10.04 Lucid Lynx amd64. The local system is running 9.10 Karmic Koala 32 bit and Fluxbox 1.1.1-2

  Read the article

• Network Manager Applet menu freezes and does not respond

  - by pst007x

  Since the latest update in Ubuntu 10.10, the nm-applet has started doing some strange things. I boot up the PC, all is fine, internet works, etc... but after a period of time, approx and hour, the nm-applet menu in the Gnome panel fails to respond. when I click on the icon, the menu appears, all looks well, but when I select any option, eg DISCONNECT, nothing happens. Even the VPN sub menu disappears (no triangle to select the menu.) However I do not lose the network connection... If I Run this script: killall nm-applet /etc/init.d/NetworkManager restart nm-applet all returns as normal, for a while... weird? i tried uninstall/reinstall... I even reinstalled Ubuntu, but once the latest updates are applied this issues arises... Any help?

  Read the article

• After re-installing ubuntu 13.10, stuck at GRUB Rescue, Boot-Repair didn't work!

  - by user205691

  Because i could not get the WiFi login work, i thought i will reinstall ubuntu, with internet connection to have updated drivers for wireless & graphics etc. I have deleted earlier linux partitions usings gparted and re-installed ubuntu 13.10, exactly following the same steps as i did earlier, making a 100GB /home on dev/sda and pointing root to /dev/sdb (SSD) and swap on dev/sda/ . Installing boot on /dev/sdb. But, somehow i think the grub is either corrupted or removed because i am unable to boot the laptop to any OS now. I get the following message: "no such device" xxxxx followed by huge HEX number GRUB rescue when i type ls on Grub rescue prompt, i can see hd0 & hd1, but thats about it. i tried Boot-repair but it is unable to fix the problem. The following log is generated via boot-repair create log: Boot-repair log I am unable to boot into windows or linux at the moment and need help to fix the grub so i can boot !!

  Read the article

• Sending a android.content.Context parameter to a function with JNI

  - by Ef Es

  I am trying to create a method that checks for internet connection that needs a Context parameter. The JNIHelper allows me to call static functions with parameters, but I don't know how to "retrieve" Cocos2d-x Activity class to use it as a parameter. public static boolean isNetworkAvailable(Context context) { boolean haveConnectedWifi = false; boolean haveConnectedMobile = false; ConnectivityManager cm = (ConnectivityManager) context.getSystemService( Context.CONNECTIVITY_SERVICE); NetworkInfo[] netInfo = cm.getAllNetworkInfo(); for (NetworkInfo ni : netInfo) { if (ni.getTypeName().equalsIgnoreCase("WIFI")) if (ni.isConnected()) haveConnectedWifi = true; if (ni.getTypeName().equalsIgnoreCase("MOBILE")) if (ni.isConnected()) haveConnectedMobile = true; } return haveConnectedWifi || haveConnectedMobile; } and the c++ code is JniMethodInfo methodInfo; if ( !JniHelper::getStaticMethodInfo( methodInfo, "my/app/TestApp", "isNetworkAvailable", "(android/content/Context;)V")) { //error return; } CCLog( "Method found and loaded!"); methodInfo.env->CallStaticVoidMethod( methodInfo.classID, methodInfo.methodID); methodInfo.env->DeleteLocalRef( methodInfo.classID);

  Read the article

• Download the Official How-To Geek Trivia App for Windows 8

  - by The Geek

  The new How-To Geek Trivia application has just been approved in the Windows 8 store, so if you’re already running the release preview you can go and download it right now for free. It’ll give you a daily dose of geeky trivia right on your Windows 8 desktop. Click Here to Download Geek Trivia for Windows 8 Each trivia question will present you with the question, and then once you answer, will show you whether you picked the right one as well as the full description. How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

  Read the article

• Sharing internet to Ubuntu 12.04 VMWare guest

  - by John Cogan

  Got the 12.04 distro and installed this on my Mac VMWare Fusion (Version 4.1.2). Install went fine and Ubuntu seemed to update itself during the install. Rebooted and now I cannot get Ubuntu to access the internet via my Macs Ethernet connection (Connected to a router) Have tried settings the VMWare network adaptor to NAT or bridged and Host only without success. In Ubuntu I have the eth0 set to Automatic DHCP. VMWare tools is installed as well. I know next to nothing about what to do here and net searches on both Stackoverflow and Superuser sites are producing not results for me. Could someone please help? What to eventually have Ubuntu run in the background as a development web server running Zend Framework and CE Server edition but need thew internet access to run updates etc on Ubuntu. Any help would be really appreciated. TIA John

  Read the article

• Little Wheel Is An Atmospheric and Engaging Point-and-Click Adventure

  - by Jason Fitzpatrick

  If you’re a fan of the resurgence of highly stylized and atmospheric adventure games–such as Spirit, World of Goo, and the like–you’ll definitely want to check out this well executed, free, and more than a little bit charming browser-based game. Little Wheel is set in a world of robots where, 10,000 years ago, a terrible accident at the central power plant left all the robots without power. The entire robot world went into a deep sleep and now, thanks to a freak lightning strike, one little robot has woken up. Your job, as that little robot, is to navigate the world of Little Wheel and help bring it back to life. Hit up the link below to play the game for free–the quality of the visual and audio design make going full screen and turning the speakers on a must. Little Wheel [via Freeware Genuis] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• How to access shared folders from file editors?

  - by Marchosius

  I am running a xampp server on one of my other computers, and when using the brows functionality from text editors like gedit, bluefish and Eclipse/Aptana studio I can access the shares I made for the sites running on the server. Even when I right click-edit with-application with the the file browser it does not open the file in the editor. How can get this to work without having to copy the file over from the share then edit and then upload again after I am done? Similar issue when trying to upload a file to hosting server direct from the file server I have with filezilla. with this I also need to copy the file over to my pc and then from there upload to the hosting server with filezilla. EDIT: For eclipse I found a build in functionality to do this. (new-remote system connection-Enter the access details) Nothing yet on FileZilla Hope my Question is clear

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Send Port

  - by Stuart Brierley

  I have previously talked about the installation of the Community ODBC adapter and also using the ODBC adapter to generate schemas and laterly the creation of a receive port using the ODBC Adapter.  But what about creating a send port? Select to add a new Send Port, select the ODBC Adapter and click configure. Clicking Connection string will open the DataSource window. Choose one of your system datasources and press OK. This will now update the Transport properties.  Select okay. All that remains is to set the standard send port properties and your ODBC send port is now ready.

  Read the article

• Building a database class in PHP

  - by Sprottenwels

  I wonder if I should write a database class for my application, and if so, how to accomplish it? Over there on SO, a guy mentioned it should be written as an abstract class. However, I can't understand why this would be a benefit. Do I understand correctly, that if I would write an abstract class, every other class that methods will need a database connection, could simply extend this abstract class and have it's own database object? If so, how is this different from a "normal" class where I could instantiate an database object? Another method would be to completely forget about my own class and to instantiate a mysqli object on demand. What do you recommend?

  Read the article

• How To Make FileZilla Open All The Required Files With One Click

  - by Omar Tariq

  Is there any way of configuring FileZilla so that I can open all the files on a server that I use to edit with just one click. For example if the files are like this:- /home/abc/def/one.txt /home/abc/def/yet/another/directory/two.txt /home/abc/def/ghi/yet/another/directory/three.txt then it is very time-consuming to navigate through each directory and open the required files. These are only 3 files but what if we have around 10 to 20 files? Yes, copying the path of the directories is one thing. But something that is built-in so that I can just click a button like open all the required files of this connection and it opens all the files in the editor (as set in FileZilla preferences) then that would be great!

  Read the article

• Creating a remote management interface

  - by Johnny Mopp

  I'm looking for info on creating a remote management interface for our software. This is not anything illicit. Our software is for live TV production and once they go on-air we can't access the PC (usually through LogMeIn). I would like to be able to upload/download files and issue commands to our software. The commands would be software specific like "load this file" or "run this script" or "return this value" etc. A socket connection is preferred but the problem is most of our PCs are behind firewalls and NAT servers. I'm not sure where to start. I think HTTP tunneling is the way to go but am wondering if there are other options or recommendations. Also, assume our clients are not willing to open up ports for security reasons. Thanks.

  Read the article

• The Batcave in LEGO

  - by Jason Fitzpatrick

  There seems to be something of an arms race afoot among hardcore LEGO enthusiasts, but given the awesome fruits of their labor we’re not about to attempt an intervention. This amazing diorama, complete with functioning lighting, is a 20,000 piece tribute to the Batcave. Courtesy of builders Wayne Hussey and Carlyle Livingston, we’re treated to a Batcave rendition in LEGO that’s so detailed the close-up shots feel like you can step right into them. Hit up the link below to check out more detailed photos and videos of the build. LEGO Batcave [via Make] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Smart Grid Gateway and New Meter Data Management released

  - by Anthony Shorten

  Two products have just been released and are available from edlivery.oracle.com. Smart Grid Gateway 2.0.0 - A new product to integrate to Smart Grid networks Meter Data Management 2.0.1 - A new version of the Meter Data Management product. These products are the first products to use the brand new version of the Oracle Utilities Applicaton Framework (V4.1). The new framework builds up on FW2.2 and FW4.0.2 to add exciting new features (this is just a subset): Support for Database Vault Enhancements to Business Object Maintenance Batch Statistics Portal for benchmarking Custom template user exit support File permissions now consistent with other Oracle products Use of Universal Connection Pool for all database pool access Ability to manage the batch data cache Over the next few weeks I will be publishing articles and updates to existing whitepapers to highlight all the new features.

  Read the article

• The Star Wars That I Used To Know [Video]

  - by Jason Fitzpatrick

  Run away hit Somebody That I Used To Know by Gotye is on track to become the tune of the summer; this extremely well executed parody replaces the subject of a lover scorned with a Star Wars fan scorned (with quite entertaining results). Courtesy of Teddie Films, the 5 minute parody video faithfully recreates the music and set of the Gotye video but layers over plenty of Star Wars references and some rather subtle (and not so subtle) jabs at where the Star Wars franchise has gone in recent years. If you’re even remotely dishearted over what Episodes I-III changed about the original trilogy, this one’s for you. The Star Wars That I Used To Know [via Geeks Are Sexy] How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

  Read the article

• Salesforce deployment guideline using Sandbox

  - by ybbest

  Create Deployment connection Enable the inbound change set settings on the destination Environment you would like to deploy the solution to. Enable the outbound change set settings on the source Environment where you package your application. The best practice is to Package everything in the changeset and salesforce will only deploy the change into your destination environment. If you only package the change, you could miss some of the changes. You can clone the change set on the source destination however the initial packaging takes some time as you need to go through everything and select the components manually. After the change set is packaged, you need to upload the chagneset so that destination environment can see the change set in its incoming change set list. Click Validate the change set before deployment. References: Development Lifecycle Guide Change Sets Best Practices

  Read the article

• Secure login for a game that is open source

  - by David Park

  I am making a game which i will be open sourcing. Its a simple arcade like game but requires a network connection because it is meant to be played with other people. The thing i am worrying about is how would i be sure that the client is the one that i put out for the end user to play with? Kind of a like of sv_pure for Team Fortress 2. I was thinking of different ways to combat this such as the server requesting the client's version or even it's md5 hash but people with simple java knowledge could just force a method to always return what the server wants.

  Read the article

• gstreamer vaapi problem

  - by squallbayu

  I installed gstreamer-vaapi from this PPA : ppa:guido-iodice/video sudo apt-get install gstreamer0.10-vaapi libgstvaapi-x11-0 libgstvaapi0 but, if I run totem movie player (via terminal) it's show this error : (totem:3383): GLib-GObject-WARNING **: g_object_set_valist: object class 'TotemScrsaver' has no property named 'reason' (totem:3383): GLib-GObject-WARNING **: value "10752000" of type 'guint' is invalid or out of range for property 'connection-speed' of type 'guint' libva: libva version 0.31.0 Xlib: extension "XFree86-DRI" missing on display ":0.0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/dri/nvidia_drv_video.so libva error: /usr/lib/dri/nvidia_drv_video.so init failed libva: va_openDriver() returns -1 Segmentation fault It's seems I get wrong nvidia_drv_video.so. What should I do? If I uninstall it, it's work fine, but I want to use this vaapi backend for my video decoding via GPU while I run gstreamer based apps. PS : I use Ubuntu Lucid 64bit and MSI CR 400 Notebook : Intel Core 2 Duo Nvidia 8200M

  Read the article

• How to send packets via a pptp vpn tunnel?

  - by Phill

  I'm trying to send certain port traffic through my ppp0 interface it's a pptp vpn tunnel, First, I'm using a wireless usb interface, I connect up to my access point, then I initiate my vpn, there is a connection but I do not channel all connexions through that, nor do I want to, so, say I want to channel all port 80 packets through my vpn (interface dev ppp0). I first run: iptables -t mangle -A OUTPUT -p tcp --dport 80 -j MARK --set-mark 0xa to mark the correct packets then I add a table named vpn_table, I then add ip route add default dev ppp0 table vpn_table when I do that traffic begins to dribble through the ppp0, but no pages load. I supose I must have caused some sort of coflict, or the route I'm adding in vpn_table isn't quite right. I'm not sure, I think I'm marking the packets correctly but I can't be sure of that either. UPDATE: I think i've got part of the issue solved: running tcpdump -i ppp0 showed me that indeed there was outgoing requests via ppp0, now, there is never a response, and pages do not load with using that interface..i'm still missing something.

  Read the article

• Mobile Internet Modem Olivetti Olicard 155 does not work in Ubuntu 12.10

  - by João Fracassi

  I have a problem, I bought a 3G mobile modem, but does not work in Ubuntu 12.10, also did not work on Ubuntu 12.04. I installed the USB Modeswitch and has the same flaw, does not recognize the modem within the connection manager, I connect the modem to the USB port and wait up to 20 minutes and does not recognize the modem. I ran the command recognizes the modem and lsusb as "Bus 001 Device 007: ID 0b3c: C004 Olivetti TechCenter." Does anyone have this modem, you can help me solve the problem, or does anyone have a solution? Because the manufacturer does not support Linux and according to some forums usbmodeswitch supports esste model. Olivetti Olicard modem 155.

  Read the article

• Aser Aspire 3690 WIreless Not working, new Ubuntu user

  - by drew

  I don't know that much about Ubuntu, but I put it on an Acer Aspire 3690 Laptop (replaced Win Vista). Everything seems to work fine, but the wireless connection. It says "FIRMWARE MISSING". It detects that I have a wireless card, so I don't know what to do. I've already used the "ADDITIONAL DRIVERS" thing, and that didn't work. I've googled and have not found anything helpful. I don't really know what I'm doing, so can your directions please be kindergarden level? Thank you very much for any help you can provide. I really appreciate it.

  Read the article

• How to build a great relationship with your colleagues

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When you start new job, you worry about your performance, about being able to do what the manager asks you to do, but you also worry about the relations with your colleagues. How will you get along with them? What if they don’t like you? Have you ever felt you’re „the new guy” and your colleagues have already their own way of talking one to each other, their own jokes? It’s a common feeling and can actually become stressful. I am Norbert, Middleware Presales Intern in Hungary and I’ve been working within Oracle for only 1 month. Joining such a big company has been a challenge from many perspectives. One of them was adapting with the environment and getting to know all my colleagues. You know it’s quite difficult to introduce yourself, to try to liaise with them and find some common topics, so I felt very lucky and comfortable when my manager introduced me to all of my colleagues. It was easier to accommodate and we basically we had a starting point for our discussions. We started to talk about what my position means, for how many years they’ve been within Oracle, other Oracle related topics, but also more personal stuff like what they do after work. Having this opportunity of talking with all of them helped me introduce myself in a proper way and actually I told them many things about myself. Networking wasn’t my best skill, but these first days were really helpful from a network point of view. What else can you do to get along with your colleagues? One second thing I consider as being really helpful in networking is asking work-related questions. For instance, when you don’t know how to do something or don’t understand it, asking one of your colleagues will also help you to make a connection with him and you could easily continue the discussion with some other topics which are more personal. It’s a very effective strategy and in a company like Oracle people are very willing to help you with your tasks and perform at a high level. If you see your colleagues going to lunch, you should join them. It will help you become part of their community, finding out what’s new in their lives, you’ll, step-by-step, take part in their conversations and be up to date with the hot topics they talk about. One other opportunity of becoming part of your colleagues’ community are the internal events. Subscribing to the local free time activities mailing list is very useful for finding out information about when they’re going out and have a drink or attending all sorts of events. For instance, this is how I’ve found out about a party within Oracle that most of the employees here attend. It’s a wonderful opportunity for chatting and make a stronger connection to some of them. How important is attending these events? Think about how much time you spend at work. You’d like to enjoy your work and the environment, so getting along with your colleagues is a nice thing to have. I recently attended a corporate party whose purpose was to facilitate the interaction and communication between employees. It was a real success and we had a lot of fun, especially because it was a costume party.  All the fancy dresses and funny clothes we wore made the atmosphere really enjoyable. It was easy to liaise with colleague with whom I had never interacted with before. There was a friendly spirit among us, chatting about personal stuff and about various pleasant things. Working in an international company is not an easy thing because you interact with many people and they have different styles, but all these opportunities of informal interaction are a good way to adapt to the new working environment.

  Read the article

• LAN visibility and network sharing

  - by takeshin

  I have two Ubuntu machines with wifi network cards configured as DHCP interfaces. machine1: inet addr:192.168.168.105 Bcast:192.168.168.255 Mask:255.255.255.0 Gateway: 192.168.168.252 machine2: inet addr:192.168.168.104 Bcast:192.168.168.255 Mask:255.255.255.0 Gateway: 192.168.168.252 They are connected to the router: inet addr: 192.168.168.252 Internet connection from the router is accessible on both of the machines. How to share files between those two? I have already tried few ways (eg. samba), but it looks like the machines are not visible to each other: @machine1$: ping 192.168.168.104 From 192.168.168.105 icmp_seq=1 Destination Host Unreachable What do I need to configure? Apparmor? Firewall?

  Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >