Search Results

Search found 9090 results on 364 pages for 'world of warcraft'.

Page 332/364 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

  • The Sound of Two Toilets Flushing: Constructive Criticism for Virgin Atlantic Complaints Department

    - by Geertjan
    I recently had the experience of flying from London to Johannesburg and back with Virgin Atlantic. The good news was that it was the cheapest flight available and that the take off and landing were absolutely perfect. Hence I really have no reason to complain. Instead, I'd like to offer some constructive criticism which hopefully Richard Branson will find sometime while googling his name. Or maybe someone from the Virgin Atlantic Complaints Department will find it, whatever, just want to put this information out there. Arrangement of restroom facilities. Maybe next time you design an airplane, consider not putting your toilets at a right angle right next to your rows of seats. Being able to reach, without even needing to stretch your arm, from your seat to close, yet again, a toilet door that someone, someone obviously sitting very far from the toilets, carelessly forgot to close is not an indicator of quality interior design. Have you noticed how all other airplanes have their toilets in a cubicle separated from the rows of seats? On those airplanes, people sitting in the seats near the toilets are not constantly being woken up throughout the night whenever someone enters/exits the toilet, whenever the light in the toilet is suddenly switched on, and whenever one of the toilets flushes. Bonus points for Virgin Atlantic passengers in the seats adjoining the toilets is when multiple toilets are flushed simultaneously and multiple passengers enter/exit them at the same time, a bit like an unasked for low budget musical of suddenly illuminated grumpy people in crumpled clothes. What joy that brings at 3 AM is hard to describe. Seats with extra leg room. You know how other airplanes have the seats with the extra leg room? You know what those seats tend to have? Extra leg room. It's really interesting how Virgin Atlantic's seats with extra leg room actually have no extra leg room at all. It should have been a give away, the fact that these special seats are found in the same rows as the standard seats, rather than on the cusp of real glory which is where most airlines put their extra leg room seats, with the only actual difference being that they have a slightly different color. Had you called them "seats with a different color" (i.e., almost not quite green, rather than something vaguely hinting at blue), at least I'd have known what I was getting. Picture the joy at 3 AM, rudely awakened from nightmarish slumber, partly grateful to have been released from a grayish dream of faceless zombies resembling one or two of those in a recent toilet line, by multiple adjoining toilets flushing simultaneously, while you're sitting in a seat with extra leg room that has exactly as much leg room as the seats in neighboring rows. You then have a choice of things to be sincerely annoyed about. Food from the '80's. In the '80's, airplane food came in soggy containers and even breakfast, the most important meal of the day, was a sad heap of vaguely gray colors. The culinary highlight tended to be a squashed tomato, which must have been mashed to a pulp with a brick prior to being regurgitated by a small furry animal, and there was also always a piece of immensely horrid pumpkin, as well as a slice of spongy something you'd never seen before. Sausages and mash at 6 AM on an airplane was always a heavy lump of horribleness. Thankfully, all airlines throughout the world changed from this puke inducing strategy around 1987 sometime. Not Virgin Atlantic, of course. The fatty sausages and mash are still there, bringing you flashbacks to Duran Duran, which is what you were listening to (on your walkman) the last time you saw it in an airplane. Even the golden oldie "squashed tomato attached by slime to three wet peas" is on the menu. How wonderful to have all this in a cramped seat with a long row of early morning bleariness lined up for the toilets, right at your side, bumping into your elbow, groggily, one by one, one after another, more and more, fumble-open-door-silence-flush-fumble-open-door, and on and on, while you tentatively push your fork through a soggy pile of colorless mush, fighting the urge to throw up on the stinky socks of whatever nightmarish zombie is bumping into your elbow at the time. But, then again, the plane landed without a hitch, in fact, extremely smoothly, so I'm certainly not blaming the pilots.

    Read the article

  • WIF-less claim extraction from ACS: SWT

    - by Elton Stoneman
    WIF with SAML is solid and flexible, but unless you need the power, it can be overkill for simple claim assertion, and in the REST world WIF doesn’t have support for the latest token formats.  Simple Web Token (SWT) may not be around forever, but while it's here it's a nice easy format which you can manipulate in .NET without having to go down the WIF route. Assuming you have set up a Relying Party in ACS, specifying SWT as the token format: When ACS redirects to your login page, it will POST the SWT in the first form variable. It comes through in the BinarySecurityToken element of a RequestSecurityTokenResponse XML payload , the SWT type is specified with a TokenType of http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0 : <t:RequestSecurityTokenResponse xmlns:t="http://schemas.xmlsoap.org/ws/2005/02/trust">   <t:Lifetime>     <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T07:31:18.655Z</wsu:Created>     <wsu:Expires xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T09:11:18.655Z</wsu:Expires>   </t:Lifetime>   <wsp:AppliesTo xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">     <EndpointReference xmlns="http://www.w3.org/2005/08/addressing">       <Address>http://localhost/x.y.z</Address>     </EndpointReference>   </wsp:AppliesTo>   <t:RequestedSecurityToken>     <wsse:BinarySecurityToken wsu:Id="uuid:fc8d3332-d501-4bb0-84ba-d31aa95a1a6c" ValueType="http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> [ base64string ] </wsse:BinarySecurityToken>   </t:RequestedSecurityToken>   <t:TokenType>http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0</t:TokenType>   <t:RequestType>http://schemas.xmlsoap.org/ws/2005/02/trust/Issue</t:RequestType>   <t:KeyType>http://schemas.xmlsoap.org/ws/2005/05/identity/NoProofKey</t:KeyType> </t:RequestSecurityTokenResponse> Reading the SWT is as simple as base-64 decoding, then URL-decoding the element value:     var wrappedToken = XDocument.Parse(HttpContext.Current.Request.Form[1]);     var binaryToken = wrappedToken.Root.Descendants("{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}BinarySecurityToken").First();     var tokenBytes = Convert.FromBase64String(binaryToken.Value);     var token = Encoding.UTF8.GetString(tokenBytes);     var tokenType = wrappedToken.Root.Descendants("{http://schemas.xmlsoap.org/ws/2005/02/trust}TokenType").First().Value; The decoded token contains the claims as key/value pairs, along with the issuer, audience (ACS realm), expiry date and an HMAC hash, which are in query string format. Separate them on the ampersand, and you can write out the claim values in your logged-in page:     var decoded = HttpUtility.UrlDecode(token);     foreach (var part in decoded.Split('&'))     {         Response.Write("<pre>" + part + "</pre><br/>");     } - which will produce something like this: http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationinstant=2012-08-31T06:57:01.855Z http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod=http://schemas.microsoft.com/ws/2008/06/identity/authenticationmethod/windows http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname=XYZ http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.microsoft.com/accesscontrolservice/2010/07/claims/identityprovider=http://fs.svc.xyz.com/adfs/services/trust Audience=http://localhost/x.y.z ExpiresOn=1346402225 Issuer=https://x-y-z.accesscontrol.windows.net/ HMACSHA256=oDCeEDDAWEC8x+yBnTaCLnzp4L6jI0Z/xNK95PdZTts= The HMAC hash lets you validate the token to ensure it hasn’t been tampered with. You'll need the token signing key from ACS, then you can re-sign the token and compare hashes. There's a full implementation of an SWT parser and validator here: How To Request SWT Token From ACS And How To Validate It At The REST WCF Service Hosted In Windows Azure, and a cut-down claim inspector on my github code gallery: ACS Claim Inspector. Interestingly, ACS lets you have a value for your logged-in page which has no relation to the realm for authentication, so you can put this code into a generic claim inspector page, and set that to be your logged-in page for any relying party where you want to check what's being sent through. Particularly handy with ADFS, when you're modifying the claims provided, and want to quickly see the results.

    Read the article

  • Highlights from the Oracle Customer Experience Summit @ OpenWorld

    - by Richard Lefebvre
    The Oracle Customer Experience Summit was the first-ever event covering the full breadth of Oracle's CX portfolio -- Marketing, Sales, Commerce, and Service. The purpose of the Summit was to articulate the customer experience imperative and to showcase the suite of Oracle products that can help our customers create the best possible customer experience. This topic has always been a very important one, but now that there are so many alternative companies to do business with and because people have such public ways to voice their displeasure, it's necessary for vendors to have multiple listening posts in place to gauge consumer sentiment. They need to know what is going on in real time and be able to react quickly to turn negative situations into positive ones. Those can then be shared in a social manner to enhance the brand and turn the customer into a repeat customer. The Summit was focused on Oracle's portfolio of products and entirely dedicated to customers who are committed to building great customer experiences within their businesses. Rather than DBAs, the attendees were business people looking to collaborate with other like-minded experts and find out how Oracle can help in terms of technology, best practices, and expertise. The event was at the Westin St. Francis Hotel in San Francisco as part of Oracle OpenWorld. We had eight hundred people attend, which was great for the first year. Next year, there's no doubt in my mind, we can raise that number to 5,000. Alignment and Logic Oracle's Customer Experience portfolio is made up of a combination of acquired and organic products owned by many people who are new to Oracle. We include homegrown Fusion CRM, as well as RightNow, Inquira, OPA, Vitrue, ATG, Endeca, and many others. The attendees knew of the acquisitions, so naturally they wanted to see how the products all fit together and hear the logic behind the portfolio. To tell them about our alignment, we needed to be aligned. To accomplish that, a cross functional team at Oracle agreed on the messaging so that every single Oracle presenter could cover the big picture before going deep into a product or topic. Talking about the full suite of products in one session produced overflow value for other products. And even though this internal coordination was a huge effort, everyone saw the value for our customers and for our long-term cooperation and success. Keynotes, Workshops, and Tents of Innovation We scored by having Seth Godin as our keynote speaker ? always provocative and popular. The opening keynote was a session orchestrated by Mark Hurd, Anthony Lye, and me. Mark set the stage by giving real-world examples of bad customer experiences, Anthony clearly articulated the business imperative for addressing these experiences, and I brought it all to life by taking the audience around the Customer Lifecycle and showing demos and videos, with partners included at each of the stops around the lifecycle. Brian Curran, a VP for RightNow Product Strategy, presented a session that was in high demand called The Economics of Customer Experience. People loved hearing how to build a business case and justify the cost of building a better customer experience. John Kembel, another VP for RightNow Product Strategy, held a workshop that customers raved about. It was based on the journey mapping methodology he created, which is a way to talk to customers about where they want to make improvements to their customers' experiences. He divided the audience into groups led by facilitators. Each person had the opportunity to engage with experts and peers and construct some real takeaways. The conference hotel was across from Union Square so we used that space to set up Innovation Tents. During the day we served lunch in the tents and partners showed their different innovative ideas. It was very interesting to see all the technologies and advancements. It also gave people a place to mix and mingle and to think about the fringe of where we could all take these ideas. Product Portfolio Plus Thought Leadership Of course there is always room for improvement, but the feedback on the format of the conference was positive. Ninety percent of the sessions had either a partner or a customer teamed with an Oracle presenter. The presentations weren't dry, one-way information dumps, but more interactive. I just followed up with a CEO who attended the conference with his Head of Marketing. He told me that they are using John Kembel's journey mapping methodology across the organization to pull people together. This sort of thought leadership in these highly competitive areas gives Oracle permission to engage around the technology. We have to differentiate ourselves and it's harder to do on the product side because everyone looks the same on paper. But on thought leadership ? we can, and did, take some really big steps. David Vap Group Vice President Oracle Applications Product Development

    Read the article

  • Loading XML file containing leading zeros with SSIS preserving the zeros

    - by Compudicted
    Visiting the MSDN SQL Server Integration Services Forum oftentimes I could see that people would pop up asking this question: “why I am not able to load an element from an XML file that contains zeros so the leading/trailing zeros would remain intact?”. I started to suspect that such a trivial and often-required operation perhaps is being misunderstood by the developer community. I would also like to add that the whole state of affairs surrounding the XML today is probably also going to be increasingly affected by a motion of people who dislike XML in general and many aspects of it as XSD and XSLT invoke a negative reaction at best. Nevertheless, XML is in wide use today and its importance as a bridge between diverse systems is ever increasing. Therefore, I deiced to write up an example of loading an arbitrary XML file that contains leading zeros in one of its elements using SSIS so the leading zeros would be preserved keeping in mind the goal on simplicity into a table in SQL Server database. To start off bring up your BIDS (running as admin) and add a new Data Flow Task (DFT). This DFT will serve as container to adding our XML processing elements (besides, the XML Source is not available anywhere else other than from within the DFT). Double-click your DFT and drag and drop the XMS Source component from the Tool Box’s Data Flow Sources. Now, let the fun begin! Being inspired by the upcoming Christmas I created a simple XML file with one set of data that contains an imaginary SSN number of Rudolph containing several leading zeros like 0000003. This file can be viewed here. To configure the XML Source of course it is quite intuitive to point it to our XML file, next what the XML source needs is either an embedded schema (XSD) or it can generate one for us. In lack of the one I opted to auto-generate it for me and I ended up with an XSD that looked like: <?xml version="1.0"?> <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:element name="XMasEvent"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="CaseInfo"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="ID" type="xs:unsignedByte" /> <xs:element minOccurs="0" name="CreatedDate" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="LastName" type="xs:string" /> <xs:element minOccurs="0" name="FirstName" type="xs:string" /> <xs:element minOccurs="0" name="SSN" type="xs:unsignedByte" /> <!-- Becomes string -- > <xs:element minOccurs="0" name="DOB" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="Event" type="xs:string" /> <xs:element minOccurs="0" name="ClosedDate" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> As an aside on the XML file: if your XML file does not contain the outer node (<XMasEvent>) then you may end up in a situation where you see just one field in the output. Now please note that the SSN element’s data type was chosen to be of unsignedByte (and this is for a reason). The reason is stemming from the fact all our figures in the element are digits, this is good, but this is not exactly what we need, because if we will attempt to load the data with this XSD then we are going to either get errors on the destination or most typically lose the leading zeros. So the next intuitive choice is to change the data type to string. Besides, if a SSIS package was already created based on this XSD and the data type change was done thereafter, one should re-set the metadata by right-clicking the XML Source and choosing “Advanced Editor” in which there is a refresh button at the bottom left which will do the trick. So far so good, we are ready to load our XML file, well actually yes, and no, in my experience typically some data conversion may be required. So depending on your data destination you may need to tweak the data types targeted. Let’s add a Data Conversion Task to our DFT. Your package should look like: To make the story short I only will cover the SSN field, so in my data source the target SQL Table has it as nchar(10) and we chose string in our XSD (yes, this is a big difference), under such circumstances the SSIS will complain. So will go and manipulate on the data type of SSN by making it Unicode String (DT_WSTR), World String per se. The conversion should look like: The peek at the Metadata: We are almost there, now all we need is to configure the destination. For simplicity I chose SQL Server Destination. The mapping is a breeze, F5 and I am able to insert my data into SQL Server now! Checking the zeros – they are all intact!

    Read the article

  • Specs, Form and Function – What am I Missing?

    - by Barry Shulam
    0 0 1 628 3586 08041 29 8 4206 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Friday October 26th the Microsoft Surface RT arrived at the office.  I was summoned to my boss’s office for the grand unpacking.  If I had planned ahead I could have used my iPhone 4 to film the event and post it on YouTube however the desire to hold the device and turn it ON was more inviting than becoming a proxy reviewer for Engadget’s website.  1980 was the first time we had a personal computer in our house.  It was a  Kaypro computer. It weighed 29 pounds more than any persons lap could hold.  Then the term “portable computer” meant you could remove it from the building and take it else where.  Today I am typing on this entry on a Macbook Air which weighs 2.38 pounds. This morning Amazons front page main title is: “Much More for Much Less” I was born at the right time to start with the CPM operating system on the Kaypro thru the DOS, Windows, Linux, Mac OSX and mobile phone operating systems and languages.  If you are not aware Technology is moving at a rapid pace.  The New iPad (those who are keeping score – iPad4) is replacing a 7 month old machine the New iPad (iPad 3) I have used and owned many technology devices in my life.  The main point that most of the reader who are in the USA overlook is the fact that we are in the USA.  The devices we purchase have a great digital garden to support them.  The Kaypro computer had a 7-inch screen.  It was a TV tube with two colors – Black and Green.  You could see the 80-column screen flicker with characters – have you every played Pac-Man emulated on the screen with the ABC characters. Traveling across the world you will find that not all apps on your device will function as they did back home because they are not offered outside of your country of origin. I think the main question a buyer of technology should be asking is Function.  The greatest Specs with out function limit you.  The most beautiful form with out function is the same as a crystal vase on your shelf – not a good cereal bowl in the morning. Microsoft Surface RT, Amazon Kindle Fire and Apple iPad all great devices in their respective customers hands. My advice for those looking to purchase on this year:  If the device is your only technology device you buy what you WANT and LIKE. Consider this parallel universe if its not your only device?  Ever go shopping for clothing, shoes, and accessories with your wife, girlfriend, sister or mother?  If you listen carefully you will hear the little voices coming out of there heads saying:  “This goes well with that and I can use it also with that outfit” ”Do you think this clashes with that?”  “Ohh I love how that combination looks on you”.  Portable devices such as tablets and computers can offer a whole lot more when they are combined with the digital echo system you have at home and the manufacturer offers online. Pros of each Device: Microsoft Surface RT: There is a new functionality named SmartGlass which will let you share the content off your tablet to your XBOX 360.  Microsoft office is loaded on the tablet.  You can have more than one user profile on the tablet if you share it with others.   Amazon Kindle or Kindle HD: If you are an Amazon consumer with an annual Amazon Prime service you can consume videos and read books off the Amazon site.  Its the cheapest device.  Its a step up from the kindle reader in many ways.   Apple Ipad or Ipad mini: Over 270 Thousand applications.  Airplay permits you the ability to share to your TV screen. If you are a cord cutter (a person who gets their entertainment content over the web or air vs Cable Providers) the Airplay or Smart glass are a huge bonus.  iPad mini or not: The mini will fit in a purse where the larger one will not.  Its lighter which makes it nice to hold for prolonged periods.  It has an option for LTE wireless which non of the other sub 9 inch tables offer.  The screen is non retina which means the applications are smaller.  Speaking with individuals who are above 50 in age that wear glasses they retina does not make a difference for them however they prefer the larger iPad over the new mini.   Happy Shopping this Channuka Season.   The Kosher Coder.   Follow me on twitter @KosherCoder

    Read the article

  • Unexpected advantage of Engineered Systems

    - by user12244672
    It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches.  Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful.  In another, complex. The system is highly Engineered.  But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components.  For example, there's myriad network protocols which could be used with Infiniband.  Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up).  We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously.  Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction.  In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon.  That fix went back into all Solaris releases the following Monday.  From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation.  The reasons were unclear and the information sparse.  The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue.  A number of contributing factors were discovered, including tunable parameters.  An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load.  Workarounds were identified.  Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side.  The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented.  The customer is now extremely happy with performance and robustness.  Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers.  This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers.  If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue.  But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer.  That is a key advantage of Engineered Systems which should not be underestimated.  Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams.  It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

    Read the article

  • jQuery with SharePoint solutions

    - by KunaalKapoor
    For me jQuery is the 'Plan-B' for everything.And most of my projects include the use of jQuery for something or the other, so I decided to write a small note on what works best while using jQuery along with SharePoint.I prefer to use the jQuery JavaScript library, which is far more robust, easier to use, and allows for plugins. Follow the steps below to add jQuery to your master page. For office 365, the prefered location to add jQuery files is the "Site Asserts" library.Deployment Best PracticesThey are only as good as the context it’s being referenced.  In other words, take into account your world before applying it.Script your deployment options.  Folder in SPD. Use the file system.  Make external references.  The JQuery library is on the Microsoft Ajax Content Delivery Network. You may even choose to publish to and from the document library. (pros and cons to this approach)Reference options when referencing the script.ScriptLink will make sure it’s loaded at the top of the page and only loaded once. You need Visual Studio or SPDContent Editor Web Part (CEWP).  Drop it on the page and it’s there.  Easy but dangerousCustom Actions. Great for global deployments of JQuery.  Loads it on every page. It also works in Sandbox installations.Deployment Maintenance Dont’sDon’t add scripts directly to your Master Page. That’s way too much effort because the pages are hard to maintain.Don’t add scripts directly to the CEWP.  Use a content link instead. That will allow for reuse. If you or someone deletes the CEWP you won’t lose code in the web partSecurity.  Any scripts run with the same privileges of the current user.  In other words, you can’t get in trouble.Development Best PracticesDon’t abuse the DOM.  There are better options to load the DOM without hitting it 1,000 times.User other performance boosters.Try other libraries.  Try some custom codeAvoid String conversionMinify your filesUse CAML to reduce number of returns rowsOnly update your JQuery library AFTER RIGOROUS REGRESSION TESTINGCRUD operations can come with some funSP Services wraps SharePoint’s web services for executionThe Bing SDK is pretty easy to use.  You can add it to your page with a script,  put it into a content editor web part and connect it from the address parameters in a list.Steps:1. Go to jquery.com and download the latest jQuery library to your desktop. You want to get the compressed production version, not the development version.2. Open SharePoint Designer (SPD) and connect to the root level of your site's site collection.In SPD, open the "Style Library" folder. Create a folder named "Scripts" inside of the Style Library. Drag the jQuery library JavaScript file from your desktop into the Scripts folder.In the Scripts folder, create a new JavaScript file and name it (e.g. "actions.js").3. If you are using visual studio add a folder for js, you can create a new folder at the root level or if you prefer more cleaner solutions like me, you can use the layouts folder which cleans out on deactivation/uninstall.4. Within the <head> tag of the master page, add a script reference to the jQuery library just above the content place holder named "PlaceHolderAdditonalPageHead" (and above your custom CSS references, if applicable) as follows:<script src="/Style%20Library/Scripts/{jquery library file}.js" type="text/javascript"></script>Immediately after the jQuery library reference add a script reference to your custom scripts file as follows:<script src="/Style%20Library/Scripts/actions.js" type="text/javascript"></script>Inside your script tag, you can test if jQuery is already defined and if not, then add it to the page.<script type='text/javascript'>  if (typeof jQuery == 'undefined')    document.write('<scr'+'ipt type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></sc'+'ript>');</script>For the inquisitive few... Read on if you'd like :)Why jQuery on SharePoiny is AwesomeIt’s all about that visual wow factor.  You can get past that, “But it looks like SharePoint”  Take a long list view and put it into JQuery with pagination, etc and you are the hero.  It’s also about new controls you get with JQuery that you couldn’t do before.Why jQuery with SharePoint should be AwfulAlthough it’s fairly easy to get jQuery up and running. Copy/Paste can cause a problem.  If you don’t understand what it’s doing in the Client Object Model and the Document Object Model then it will do things on your site that were completely unexpected. Many blogs will note workarounds they employed on their sites. Why it’s not working: Debugging “sucks”.You need to develop small blocks of functionality, Test it by putting in some alerts  and console.log. Set breakpoints and monitor the DOM via Firebug and some IE development toolsPerformance - It happens all the time. But you should look at the tradeoffs. More time may give you more functionality.Consistency - ”But it works fine on my computer. So test on many browsers.  Take into account client resourcesHarm the Farm -  You need to code wisely and negatively test.  Don’t be the cause of a DoS attack that’s really JQuery asking for a resource over and over and over again.  So code wisely. Do negative testing. Monitor Server Resources.They also did a demo where JQuery did an endless loop to pull data from a list. It’s a poor decision but also an easy mistake.  They spiked their server resources within a couple seconds and had to shut down the call before it brought it down.ConclusionJQuery is now another tool in your tool kit. You don’t have to use it. Use it where it makes sense and where it helps you get your job done.Don’t abuse it, you will pay for it laterIt will add to page bloat so take that into accountIt can slow your performance

    Read the article

  • How Important is Project Team Communication in the Public Sector?

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Paul Bender, Director of Public Administration Strategy, Oracle Primavera It goes without saying that communication between project team members is a core competency that connects every member of a project team to a common set of strategies, goals and actions. If these components are not effectively shared by project leads and understood by stakeholders, project outcomes can be jeopardized and budgets may incur unnecessary risk. As reported by PMI’s 2013 Pulse of the Profession, an organization’s ability to meet project timelines, budgets and especially goals significantly impacts its ability to survive—and even thrive. The Pulse study revealed that the most crucial success factor in project management is effective communication to all stakeholders—a critical core competency for public agencies. PMI’s 2013 Pulse of the Profession report revealed that US$135 million is at risk for every US$1 billion spent on a project. Further research on the importance of effective project team communication uncovers that a startling 56 percent (US$75 million of that US$135 million) is at risk due to ineffective communication. Simply stated: public agencies cannot execute strategic initiatives unless they can effectively communicate their strategic alignment and business benefits. Executives and project managers around the world agree that poor communication between project team members contributes to project failure. A Forbes Insights 2010 Strategic Initiatives Study “Adapting Corporate Strategy to the Changing Economy,” found that nine out of ten CEOs believe that communication is critical to the success of their strategic initiatives, and nearly half of respondents cite communication as an integral and active component of their strategic planning and execution process. Project managers see it similarly from their side as well. According to PMI’s Pulse research, 55 percent of project managers agree that effective communication to all stakeholders is the most critical success factor in project management. As we all know, not all projects succeed. On average, two in five projects do not meet their original goals and business intent, and one-half of those unsuccessful projects are related to ineffective communication. Results reveal that while all aspects of project communication can be challenging to public agencies, the biggest problem areas are: A gap in understanding the business benefits. Challenges surrounding the language used to deliver project-related information, which is often unclear and peppered with project management jargon. Public agencies -- federal, state, and local -- have difficulty communicating with the appropriate levels with clarity and detail. This difficulty is likely exacerbated by the divide between each key audience and its understanding of project-specific, technical language. For those involved in public sector project and portfolio management, I would be interested to hear your thoughts and please visit Primavera EPPM solutions for public sector.

    Read the article

  • Use your own domain email and tired of SPAM? SPAMfighter FTW

    - by Dave Campbell
    I wouldn't post this if I hadn't tried it... and I paid for it myself, so don't anybody be thinking I'm reviewing something someone sent me! Long ago and far away I got very tired of local ISPs and 2nd phone lines and took the plunge and got hooked up to cable... yeah I know the 2nd phone line concept may be hard for everyone to understand, but that's how it was in 'the old days'. To avoid having to change email addresses all the time, I decided to buy a domain name, get minimal hosting, and use that for all email into the house. That way if I changed providers, all the email addresses wouldn't have to change. Of course, about a dozen domains later, I have LOTS of pop email addresses and even an exchange address to my client's server... times have changed. What also has changed is the fact that we get SPAM... 'back in the day' when I was a beta tester for the first ISP in Phoenix, someone tried sending an ad to all of us, and what he got in return for his trouble was a bunch of core dumps that locked up his email... if you don't know what a core dump is, ask your grandfather. But in today's world, we're all much more civilized than that, and as with many things, the criminals seem to have much more rights than we do, so we get inundated with email offering all sorts of wild schemes that you'd have to be brain-dead to accept, but yet... if people weren't accepting them, they'd stop sending them. I keep hoping that survival of the smartest would weed out the mental midgets that respond and then the jumk email stop, but that hasn't happened yet anymore than finding high-quality hearing aids at the checkout line of Safeway because of all the dimwits playing music too loud inside their car... but that's another whole topic and I digress. So what's the solution for all the spam? And I mean *all*... on that old personal email address, I am now getting over 150 spam messages a day! Yes I know that's why God invented the delete key, but I took it on as a challenge, and it's a matter of principle... why should I switch email addresses, or convert from [email protected] to something else, or have all my email filtered through some service just because some A-Hole somewhere has a site up trying to phish Ma & Pa Kettle (ask your grandfather about that too) out of their retirement money? Well... I got an email from my cousin the other day while I was writing yet another email rule, and there was a banner on the bottom of his email that said he was protected by SPAMfighter. SPAMfighter huh.... so I took a look at their site, and found yet one more of the supposed tools to help us. But... I read that they're a Microsoft Gold Partner... and that doesn't come lightly... so I took a gamble and here's what I found: I installed it, and had to do a couple things: 1) SPAMfighter stuffed the SPAMfighter folder into my client's exchange address... I deleted it, made a new SPAMfighter folder where I wanted it to go, then in the SPAMfighter Clients settings for Outlook, I told it to put all spam there. 2) It didn't seem to be doing anything. There's a ribbon button that you can select "Block", and I did that, wondering if I was 'training' it, but it wasn't picking up duplicates 3) I sent email to support, and wrote a post on the forum (not to self: reply to that post). By the time the folks from the home office responded, it was the next day, and first up, SPAMfighter knocked down everything that came through when Outlook opend... two thumbs up! I disabled my 'garbage collection' rule from Outlook, and told Outlook not to use the junk folder thinking it was interfering. 4) Day 2 seemed to go about like Day 1... but I hung in there. 5) Day 3 is now a whole new day... I had left Outlook open and hadn't looked at the PC since sometime late yesterday afternoon, and when I looked this morning, *every bit* of spam was in the SPAMfighter folder!! I'm a new paying customer After watching SPAMfighter work this morning, I've purchased a 1-year license, and I now can sit and watch as emails come in and disappear from my inbox into the SPAMfighter folder. No more continual tweaking of the rules. I've got SPAMfighter set to 'Very Hard' filtering... personally I'd rather pull the few real emails out of the SPAMfighter folder than pull spam out of the real folders. Yes this is simply another way of using the delete key, but you know what? ... it feels good :) Here's a screenshot of the stats after just about 48 hours of being onboard: Note that all the ones blocked by me were during Day 1 and 2... I've blocked none today, and everything is blocked. Stay in the 'Light!

    Read the article

  • Mark Hurd on the Customer Revolution: Oracle's Top 10 Insights

    - by Richard Lefebvre
    Reprint of an article from Forbes Businesses that fail to focus on customer experience will hear a giant sucking sound from their vanishing profitability. Because in today’s dynamic global marketplace, consumers now hold the power in the buyer-seller equation, and sellers need to revamp their strategy for this new world order. The ability to relentlessly deliver connected, personalized and rewarding customer experiences is rapidly becoming one of the primary sources of competitive advantage in today’s dynamic global marketplace. And the inability or unwillingness to realize that the customer is a company’s most important asset will lead, inevitably, to decline and failure. Welcome to the lifecycle of customer experience, in which consumers explore, engage, shop, buy, ask, compare, complain, socialize, exchange, and more across multiple channels with the unconditional expectation that each of those interactions will be completed in an efficient and personalized manner however, wherever, and whenever the customer wants. While many niche companies are offering point solutions within that sprawling and complex spectrum of needs and requirements, businesses looking to deliver superb customer experiences are still left having to do multiple product evaluations, multiple contract negotiations, multiple test projects, multiple deployments, and–perhaps most annoying of all–multiple and never-ending integration projects to string together all those niche products from all those niche vendors. With its new suite of customer-experience solutions, Oracle believes it can help companies unravel these challenges and move at the speed of their customers, anticipating their needs and desires and creating enduring and profitable relationships. Those solutions span the full range of marketing, selling, commerce, service, listening/insights, and social and collaboration tools for employees. When Oracle launched its suite of Customer Experience solutions at a recent event in New York City, president Mark Hurd analyzed the customer experience revolution taking place and presented Oracle’s strategy for empowering companies to capitalize on this important market shift. From Hurd’s presentation and related materials, I’ve extracted a list of Hurd’s Top 10 Insights into the Customer Revolution. 1. Please Don’t Feed the Competitor’s Pipeline!After enduring a poor experience, 89% of consumers say they would immediately take their business to your competitor. (Except where noted, the source for these findings is the 2011 Customer Experience Impact (CEI) Report including a survey commissioned by RightNow (acquired by Oracle in March 2012) and conducted by Harris Interactive.) 2. The Addressable Market Is Massive. Only 1% of consumers say their expectations were always met by their actual experiences. 3. They’re Willing to Pay More! In return for a great experience, 86% of consumers say they’ll pay up to 25% more. 4. The Social Media Microphone Is Always Live. After suffering through a poor experience, more than 25% of consumers said they posted a negative comment on Twitter or Facebook or other social media sites. Conversely, of those consumers who got a response after complaining, 22% posted positive comments about the company. 5.  The New Deal Is Never Done: Embrace the Entire Customer Lifecycle. An appropriately active and engaged relationship, says Hurd, extends across every step of the entire processs: need, research, select, purchase, receive, use, maintain, and recommend. 6. The 360-Degree Commitment. Customers want to do business with companies that actively and openly demonstrate the desire to establish strong and seamless connections across employees, the company, and the customer, says research firm Temkin Group in its report called “The CX Competencies.” 7. Understand the Emotional Drivers Behind Brand Love. What makes consumers fall in love with a brand? Among the top factors are friendly employees and customer reps (73%), easy access to information and support (55%), and personalized experiences, such as when companies know precisely what products or services customers have purchased in the past and what issues those customers have raised (36%). 8.  The Importance of Immediate Action. You’ve got one week to respond–and then the opportunity’s lost. If your company needs more than a week to answer a prospect’s question or request, most of those prospects will terminate the relationship. 9.  Want More Revenue, Less Churn, and More Referrals? Then improve the overall customer experience: Forrester’s research says that approach put an extra $900 million in the pockets of wireless service providers, $800 million for hotels, and $400 million for airlines. 10. The Formula for CX Success.  Hurd says it includes three elegantly interlaced factors: Connected Engagement, to personalize the experience; Actionable Insight, to maximize the engagement; and Optimized Execution, to deliver on the promise of value. RECOMMENDED READING: The Top 10 Strategic CIO Issues For 2013 Wal-Mart, Amazon, eBay: Who’s the Speed King of Retail? Career Suicide and the CIO: 4 Deadly New Threats Memo to Marc Benioff: Social Is a Tool, Not an App

    Read the article

  • How customers view and interact with a company

    The Harvard Business Review article written by Rayport and Jaworski is aptly titled “Best Face Forward” because it sheds light on how customers view and interact with a company. In the past most business interaction between customers was performed in a face to face meeting where one party would present an item for sale and then the other would decide whether to purchase the item. In addition, if there was a problem with a purchased item then they would bring the item back to the person who sold the item for resolution. One of my earliest examples of witnessing this was when I was around 6 or 7 years old and I was allowed to spend the summer in Tennessee with my Grandparents. My Grandfather had just written a book about the local history of his town and was selling them to his friends and local bookstores. I still remember he offered to pay me a small commission for every book I helped him sell because I was carrying the books around for him. Every sale he made was face to face with his customers which allowed him to share his excitement for the book with everyone. In today’s modern world there is less and less human interaction as the use of computers and other technologies allow us to communicate within seconds even though both parties may be across the globe or just next door. That being said, customers view a company through multiple access points called faces that represent the ability to interact without actually seeing a human face. As a software engineer this is a good and a bad thing because direct human interaction and technology based interaction have both good and bad attributes based on the customer. How organizations coordinate business and IT functions, to provide quality service varies based on each individual business and the goals and directives put in place by its management. According to Rayport and Jaworski, the type of interaction used through a particular access point may lend itself to be people-dominate, machine-dominate, or a combination of both. The method by which a company communicates information through an access point is a strategic choice that relates costs and customer outcomes. To simplify this, the choice is based on what can give the customer the best experience interacting with the company when the cost of the interaction is also a factor. I personally see examples of this every day at work. The company website is machine-dominate with people updating and maintaining information, our groups department is people dominate because most of the customer interaction is done at the customers location and is backed up by machine based data sources, and our sales/member service department is a hybrid because employees work in tandem with machines in order for them to assist customers with signing up or any other issue they may have. The positive and negative aspects of human and machine interfaces are a key aspect in deciding which interface to use when allowing customers to access a company or a combination of the two. Rayport and Jaworski also used MIT professor Erik Brynjolfsson preliminary catalog of human and machine strengths. He stated that humans outperform machines in judgment, pattern recognition, exception processing, insight, and creativity. I have found this to be true based on the example of how sales and member service reps at my company handle a multitude of questions and various situations with a lot of unknown variables. A machine interface could never effectively be able to handle these scenarios because there are too many variables to consider and would not have the built-in logic to process each customer’s claims and needs. In addition, he also stated that machines outperform humans in collecting, storing, transmitting and routine processing. An example of this would be my employer’s website. Customers can simply go online and purchase a product without even talking to a sales or member services representative. The information is then stored in a database so that the customer can always go back and review there order, and access their selected services. A human, no matter how smart they are would never be able to keep track of hundreds of thousands of customers let alone know what they purchased or how much they paid. In today’s technology driven economy every company must offer their customers multiple methods of accessibly in order to survive. The more of an opportunity a company has to create a positive experience for their customers, in my opinion, they more likely the customer will return to that company again. I have noticed this with my personal shopping habits and experiences. References Rayport, J., & Jaworski, B. (2004). Best Face Forward. Harvard Business Review, 82(12), 47-58. Retrieved from Business Source Complete database.

    Read the article

  • Agile Testing Days 2012 – My First Conference!

    - by Chris George
    I’d like to give you a bit of background first… so please bear with me! In 1996, whilst studying for my final year of my degree, I applied for a job as a C++ Developer at a small software house in Hertfordshire  After bodging up the technical part of the interview I didn’t get the job, but was offered a position as a QA Engineer instead. The role sounded intriguing and the pay was pretty good so in the absence of anything else I took it. Here began my career in the world of software testing! Back then, testing/QA was often an afterthought, something that was bolted on to the development process and very much a second class citizen. Test automation was rare, and tools were basic or non-existent! The internet was just starting to take off, and whilst there might have been testing communities and resources, we were certainly not exposed to any of them. After 8 years I moved to another small company, and again didn’t find myself exposed to any of the changes that were happening in the industry. It wasn’t until I joined Red Gate in 2008 that my view of testing and software development as a whole started to expand. But it took a further 4 years for my view of testing to be totally blown open, and so the story really begins… In May 2012 I was fortunate to land the role of Head of Test Engineering. Soon after, I received an email with details for the “Agile Testi However, in my new role, I decided that it was time to bite the bullet and at least go to one conference. Perhaps I could get some new ideas to supplement and support some of the ideas I already had.ng Days” conference in Potsdam, Germany. I looked over the suggested programme and some of the talks peeked my interest. For numerous reasons I’d shied away from attending conferences in the past, one of the main ones being that I didn’t see much benefit in attending loads of talks when I could just read about stuff like that on the internet. So, on the 18th November 2012, myself and three other Red Gaters boarded a plane at Heathrow bound for Potsdam, Germany to attend Agile Testing Days 2012. Tutorial Day – “Software Testing Reloaded” We chose to do the tutorials on the 19th, I chose the one titled “Software Testing Reloaded – So you wanna actually DO something? We’ve got just the workshop for you. Now with even less powerpoint!”. With such a concise and serious title I just had to see what it was about! I nervously entered the room to be greeted by tables, chairs etc all over the place, not set out and frankly in one hell of a mess! There were a few people in there playing a game with dice. Okaaaay… this is going to be a long day! Actually the dice game was an exercise in deduction and simplification… I found it very interesting and is certainly something I’ll be using at work as a training exercise! (I won’t explain the game here cause I don’t want to let the cat out of the bag…) The tutorial consisted of several games, exploring different aspects of testing. They were all practical yet required a fair amount of thin king. Matt Heusser and Pete Walen were running the tutorial, and presented it in a very relaxed and light-hearted manner. It was really my first experience of working in small teams with testers from very different backgrounds, and it was really enjoyable. Matt & Pete were very approachable and offered advice where required whilst still making you work for the answers! One of the tasks was to devise several strategies for testing some electronic dice. The premise was that a Vegas casino wanted to use the dice to appeal to the twenty-somethings interested in tech, but needed assurance that they were as reliable and random as traditional dice. This was a very interesting and challenging exercise that forced us to challenge various assumptions, determine/clarify requirements but most of all it was frustrating because the dice made a very very irritating beeping noise. Multiple that by at least 12 dice and I was dreaming about them all that night!! Some of the main takeaways that were brilliantly demonstrated through the games were not to make assumptions, challenge requirements, and have fun testing! The tutorial lasted the whole day, but to be honest the day went very quickly! My introduction into the conference experience started very well indeed, and I would talk to both Matt and Pete several times during the 4 days. Days 1,2 & 3 will be coming soon…  

    Read the article

  • How to properly add texture to multi-fixture/shape b2Body

    - by Blazej Wdowikowski
    Hello to everyone this is my first poste here I hope that will be not fail start. At start I must say I make part 1 in Ray's Tutorial "How To Make A Game Like Fruit Ninja With Box2D and Cocos2D". But I wonder what when I want make more complex body with texture? Simple just add n b2FixtureDef to the same body. OK but what about texture? If I will take code from that tutorial it only fill last fixture. Probably it does not takes every b2Vec2 point. I was right, it did not. So quick refactor and from that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int vertexCount = shape->GetVertexCount(); NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; for(int i = 0; i < vertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width, _centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I came up with that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { int vertexCount = 0; //gather total number of b2Vect2 points b2Fixture *currentFixture = body->GetFixtureList(); while (currentFixture) { //new b2PolygonShape *shape = (b2PolygonShape*)currentFixture->GetShape(); vertexCount += shape->GetVertexCount(); currentFixture = currentFixture->GetNext(); } NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); while (originalFixture) { //new NSLog((NSString*)@"-"); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int currentVertexCount = shape->GetVertexCount(); for(int i = 0; i < currentVertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } originalFixture = originalFixture->GetNext(); } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width,_centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I was working for simple two fixtures body like b2BodyDef bodyDef; bodyDef.type = b2_dynamicBody; bodyDef.position = position; bodyDef.angle = rotation; b2Body *body = world->CreateBody(&bodyDef); b2FixtureDef fixtureDef; fixtureDef.density = 1.0; fixtureDef.friction = 0.5; fixtureDef.restitution = 0.2; fixtureDef.filter.categoryBits = 0x0001; fixtureDef.filter.maskBits = 0x0001; b2Vec2 vertices[] = { b2Vec2(0.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(0.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(50.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(60.0/PTM_RATIO,60.0/PTM_RATIO) }; b2PolygonShape shape; shape.Set(vertices, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); b2Vec2 vertices2[] = { b2Vec2(20.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(20.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(70.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(80.0/PTM_RATIO,60.0/PTM_RATIO) }; shape.Set(vertices2, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); But if I try put secondary shape upper than first it starting wierd, texture goes crazy. For example not mention about more complex shapes. What's more if shapes have one common point texture will not render for them at all [For that I use Physics Edytor like in tutorial part1] BTW. I use PolygonSprite and in method createWithWorld... another shapes. Uff.. Question So my question is, why texture coords are in such a mess up? It's my modify method or just wrong approach? Maybe I should remove duplicated from points array?

    Read the article

  • Most efficient way to implement delta time

    - by Starkers
    Here's one way to implement delta time: /// init /// var duration = 5000, currentTime = Date.now(); // and create cube, scene, camera ect ////// function animate() { /// determine delta /// var now = Date.now(), deltat = now - currentTime, currentTime = now, scalar = deltat / duration, angle = (Math.PI * 2) * scalar; ////// /// animate /// cube.rotation.y += angle; ////// /// update /// requestAnimationFrame(render); ////// } Could someone confirm I know how it works? Here what I think is going on: Firstly, we set duration at 5000, which how long the loop will take to complete in an ideal world. With a computer that is slow/busy, let's say the animation loop takes twice as long as it should, so 10000: When this happens, the scalar is set to 2.0: scalar = deltat / duration scalar = 10000 / 5000 scalar = 2.0 We now times all animation by twice as much: angle = (Math.PI * 2) * scalar; angle = (Math.PI * 2) * 2.0; angle = (Math.PI * 4) // which is 2 rotations When we do this, the cube rotation will appear to 'jump', but this is good because the animation remains real-time. With a computer that is going too quickly, let's say the animation loop takes half as long as it should, so 2500: When this happens, the scalar is set to 0.5: scalar = deltat / duration scalar = 2500 / 5000 scalar = 0.5 We now times all animation by a half: angle = (Math.PI * 2) * scalar; angle = (Math.PI * 2) * 0.5; angle = (Math.PI * 1) // which is half a rotation When we do this, the cube won't jump at all, and the animation remains real time, and doesn't speed up. However, would I be right in thinking this doesn't alter how hard the computer is working? I mean it still goes through the loop as fast as it can, and it still has render the whole scene, just with different smaller angles! So this a bad way to implement delta time, right? Now let's pretend the computer is taking exactly as long as it should, so 5000: When this happens, the scalar is set to 1.0: angle = (Math.PI * 2) * scalar; angle = (Math.PI * 2) * 1; angle = (Math.PI * 2) // which is 1 rotation When we do this, everything is timsed by 1, so nothing is changed. We'd get the same result if we weren't using delta time at all! My questions are as follows Mostly importantly, have I got the right end of the stick here? How do we know to set the duration to 5000 ? Or can it be any number? I'm a bit vague about the "computer going too quickly". Is there a way loop less often rather than reduce the animation steps? Seems like a better idea. Using this method, do all of our animations need to be timesed by the scalar? Do we have to hunt down every last one and times it? Is this the best way to implement delta time? I think not, due to the fact the computer can go nuts and all we do is divide each animation step and because we need to hunt down every step and times it by the scalar. Not a very nice DSL, as it were. So what is the best way to implement delta time? Below is one way that I do not really get but may be a better way to implement delta time. Could someone explain please? // Globals INV_MAX_FPS = 1 / 60; frameDelta = 0; clock = new THREE.Clock(); // In the animation loop (the requestAnimationFrame callback)… frameDelta += clock.getDelta(); // API: "Get the seconds passed since the last call to this method." while (frameDelta >= INV_MAX_FPS) { update(INV_MAX_FPS); // calculate physics frameDelta -= INV_MAX_FPS; } How I think this works: Firstly we set INV_MAX_FPS to 0.01666666666 How we will use this number number does not jump out at me. We then intialize a frameDelta which stores how long the last loop took to run. Come the first loop frameDelta is not greater than INV_MAX_FPS so the loop is not run (0 = 0.01666666666). So nothing happens. Now I really don't know what would cause this to happen, but let's pretend that the loop we just went through took 2 seconds to complete: We set frameDelta to 2: frameDelta += clock.getDelta(); frameDelta += 2.00 Now we run an animation thanks to update(0.01666666666). Again what is relevance of 0.01666666666?? And then we take away 0.01666666666 from the frameDelta: frameDelta -= INV_MAX_FPS; frameDelta = frameDelta - INV_MAX_FPS; frameDelta = 2 - 0.01666666666 frameDelta = 1.98333333334 So let's go into the second loop. Let's say it took 2(? Why not 2? Or 12? I am a bit confused): frameDelta += clock.getDelta(); frameDelta = frameDelta + clock.getDelta(); frameDelta = 1.98333333334 + 2 frameDelta = 3.98333333334 This time we enter the while loop because 3.98333333334 = 0.01666666666 We run update We take away 0.01666666666 from frameDelta again: frameDelta -= INV_MAX_FPS; frameDelta = frameDelta - INV_MAX_FPS; frameDelta = 3.98333333334 - 0.01666666666 frameDelta = 3.96666666668 Now let's pretend the loop is super quick and runs in just 0.1 seconds and continues to do this. (Because the computer isn't busy any more). Basically, the update function will be run, and every loop we take away 0.01666666666 from the frameDelta untill the frameDelta is less than 0.01666666666. And then nothing happens until the computer runs slowly again? Could someone shed some light please? Does the update() update the scalar or something like that and we still have to times everything by the scalar like in the first example?

    Read the article

  • Managing Your First SharePoint Project or Team

    - by Mark Rackley
    (*editor’s note* If you have proper SharePoint Training, know the difference between a site and a site collection, and have the utmost respect for the knowledge of your SharePoint team skip this blog and go directly to meetdux.com, do not pass go, do not collect $200… otherwise, please proceed) Dear Mr. or Mrs. I-know-nothing-about-SharePoint-but-hey,-I-have-manager-in-my-title-so-I’ll-tell-you-how-to-your-job, Thank you so much for joining the Acme corporation. We appreciate your eagerness and willingness to jump in and help us accomplish all of our goals here at acme (these roadrunner rockets don’t make themselves). You may have noticed that we have this thing called SharePoint lying around and we have invested some time in money to make it not a complete piece of garbage. So, I thought I’d give you some pointers to help make your stay here enjoyable and productive. Yeah… you don’t really know SharePoint Just because you had a mysite at your last organization or had a SharePoint 2003 team site does NOT mean you comprehend the vastness that is SharePoint. You don’t know what’s going on behind the scenes. You don’t know what should and should not be done. No, we CAN’T just query the SQL database directly. Yes, it really does take that long. No, we can’t do that out-of-the-box. Your experience doesn’t mean as much as you think it means… Yes, I’m aware that you co-created the internet with Al Gore and have been managing projects since I was blowing up GI Joe figures with firecrackers, however SharePoint is not like anything you have worked with before from a management perspective. Please don’t tell us the proper way to do our job or tell us how “you” would do it, and PLEASE don’t utter the words “I used to do some .NET development so let me know if you get stuck and need some guidance.” It MAY be possible for a incredible project manager to manage a SharePoint project and not understand the technology, but if you force your ideas on us or treat us like we don’t really know what we’re doing then you will prove yourself to NOT be one of those types. Oh no you didn’t… Please don’t tell us how you can bring in a group of guys of Kazakhstan to do the project for $20/hr. There are many companies out there who can do some really crappy SharePoint work and we don’t want to be stuck maintaining their junk. Do you know what it means to deploy a solution? Neither do some of those companies out there. However, there are are few AWESOME consulting firms out there but $150/hr is cheap for these guys. Believe me, it’s worth it though. You get what you pay for! Show us some respect We truly do appreciate and value your opinion and experience, but when we tell you something is different in SharePoint don’t be condescending and dismiss OUR experience and opinions. We have spent a lot of time and energy learning a very complicated technology that can open up a world of possibilities when used properly. We just want to make sure it is used properly. It’s not the same as .NET development. It’s not like a regular web application. There’s more going on behind the scenes than you can possibly fathom. Have a little faith in us please and listen when we talk. You may actually learn a thing or two. Take some time to learn the technology There is hope… you don’t have to be totally worthless. Take some time to learn SharePoint. Learn what it is and what it can do. Invest some time in learning our SharePoint environment. What’s our logical architecture and taxonomy? What governance do we have in place? If you just thought “huh?” then yes, I’m talking to you. Sincerely, Your SharePoint Team (This rant is not pointed at any particular organization or person. If you think it’s about you, you are wrong. This is just a general rant based upon things people have told me and things I’ve seen. If you don’t think it applies to you, please move on. If you think you might be guilty of handling your SharePoint team the wrong way, then just please listen, learn, and have a little faith in your team. You all have the same goal in mind. Also, take the time to learn something about SharePoint, you will all be less frustrated with each other.)

    Read the article

  • YouTube Scalability Lessons

    - by Bertrand Matthelié
    @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Calibri"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }h2 { margin: 12pt 0cm 3pt; page-break-after: avoid; font-size: 14pt; font-family: "Times New Roman"; font-style: italic; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }span.Heading2Char { font-family: Calibri; font-weight: bold; font-style: italic; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Very interesting blog post by Todd Hoff at highscalability.com presenting “7 Years of YouTube Scalability Lessons in 30 min” based on a presentation from Mike Solomon, one of the original engineers at YouTube: …. The key takeaway away of the talk for me was doing a lot with really simple tools. While many teams are moving on to more complex ecosystems, YouTube really does keep it simple. They program primarily in Python, use MySQL as their database, they’ve stuck with Apache, and even new features for such a massive site start as a very simple Python program. That doesn’t mean YouTube doesn’t do cool stuff, they do, but what makes everything work together is more a philosophy or a way of doing things than technological hocus pocus. What made YouTube into one of the world’s largest websites? Read on and see... Stats @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } 4 billion Views a day 60 hours of video is uploaded every minute 350+ million devices are YouTube enabled Revenue double in 2010 The number of videos has gone up 9 orders of magnitude and the number of developers has only gone up two orders of magnitude. 1 million lines of Python code Stack @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } Python - most of the lines of code for YouTube are still in Python. Everytime you watch a YouTube video you are executing a bunch of Python code. Apache - when you think you need to get rid of it, you don’t. Apache is a real rockstar technology at YouTube because they keep it simple. Every request goes through Apache. Linux - the benefit of Linux is there’s always a way to get in and see how your system is behaving. No matter how bad your app is behaving, you can take a look at it with Linux tools like strace and tcpdump. MySQL - is used a lot. When you watch a video you are getting data from MySQL. Sometime it’s used a relational database or a blob store. It’s about tuning and making choices about how you organize your data. Vitess- a  new project released by YouTube, written in Go, it’s a frontend to MySQL. It does a lot of optimization on the fly, it rewrites queries and acts as a proxy. Currently it serves every YouTube database request. It’s RPC based. Zookeeper - a distributed lock server. It’s used for configuration. Really interesting piece of technology. Hard to use correctly so read the manual Wiseguy - a CGI servlet container. Spitfire - a templating system. It has an abstract syntax tree that let’s them do transformations to make things go faster. Serialization formats - no matter which one you use, they are all expensive. Measure. Don’t use pickle. Not a good choice. Found protocol buffers slow. They wrote their own BSON implementation, which is 10-15 time faster than the one you can download. ...Contiues. Read the blog Watch the video

    Read the article

  • T-SQL Tuesday #34: Help! I Need Somebody!

    - by Most Valuable Yak (Rob Volk)
    Welcome everyone to T-SQL Tuesday Episode 34!  When last we tuned in, Mike Fal (b|t) hosted Trick Shots.  These highlighted techniques or tricks that you figured out on your own which helped you understand SQL Server better. This month, I'm asking you to look back this past week, year, century, or hour...to a time when you COULDN'T figure it out.  When you were stuck on a SQL Server problem and you had to seek help. In the beginning... SQL Server has changed a lot since I started with it.  <Cranky Old Guy> Back in my day, Books Online was neither.  There were no blogs. Google was the third-place search site. There were perhaps two or three community forums where you could ask questions.  (Besides the Microsoft newsgroups...which you had to access with Usenet.  And endure the wrath of...Celko.)  Your "training" was reading a book, made from real dead trees, that you bought from your choice of brick-and-mortar bookstore. And except for your local user groups, there were no conferences, seminars, SQL Saturdays, or any online video hookups where you could interact with a person. You'd have to call Microsoft Support...on the phone...a LANDLINE phone.  And none of this "SQL Family" business!</Cranky Old Guy> Even now, with all these excellent resources available, it's still daunting for a beginner to seek help for SQL Server.  The product is roughly 1247.4523 times larger than it was 15 years ago, and it's simply impossible to know everything about it.*  So whether you are a beginner, or a seasoned pro of over a decade's experience, what do you do when you need help on SQL Server? That's so meta... In the spirit of offering help, here are some suggestions for your topic: Tell us about a person or SQL Server community who have been helpful to you.  It can be about a technical problem, or not, e.g. someone who volunteered for your local SQL Saturday.  Sing their praises!  Let the world know who they are! Do you have any tricks for using Books Online?  Do you use the locally installed product, or are you completely online with BOL/MSDN/Technet, and why? If you've been using SQL Server for over 10 years, how has your help-seeking changed? Are you using Twitter, StackOverflow, MSDN Forums, or another resource that didn't exist when you started? What made you switch? Do you spend more time helping others than seeking help? What motivates you to help, and how do you contribute? Structure your post along the lyrics to The Beatles song Help! Audio or video renditions are particularly welcome! Lyrics must include reference to SQL Server terminology or community, and performances must be in your voice or include you playing an instrument. These are just suggestions, you are free to write whatever you like.  Bonus points if you can incorporate ALL of these into a single post.  (Or you can do multiple posts, we're flexible like that.)  Help us help others by showing how others helped you! Legalese, Your Rights, Yada yada... If you would like to participate in T-SQL Tuesday please be sure to follow the rules below: Your blog post must be published between Tuesday, September 11, 2012 00:00:00 GMT and Wednesday, September 12, 2012 00:00:00 GMT. Include the T-SQL Tuesday logo (above) and hyperlink it back to this post. If you don’t see your post in trackbacks, add the link to the comments below. If you are on Twitter please tweet your blog using the #TSQL2sDay hashtag.  I can be contacted there as @sql_r, in case you have questions or problems with comments/trackback.  I'll have a follow-up post listing all the contributions as soon as I can. Thank you all for participating, and special thanks to Adam Machanic (b|t) for all his help and for continuing this series!

    Read the article

  • Is Data Science “Science”?

    - by BuckWoody
    I hold the term “science” in very high esteem. I grew up on the Space Coast in Florida, and eventually worked at the Kennedy Space Center, surrounded by very intelligent people who worked in various scientific fields. Recently a new term has entered the computing dialog – “Data Scientist”. Since it’s not a standard term, it has a lot of definitions, and in fact has been disputed as a correct term. After all, the reasoning goes, if there’s no such thing as “Data Science” then how can there be a Data Scientist? This argument has been made before, albeit with a different term – “Computer Science”. In Peter Denning’s excellent article “Is Computer Science Science” (April  2005/Vol. 48, No. 4 COMMUNICATIONS OF THE ACM) there are many points that separate “science” from “engineering” and even “art”.  I won’t repeat the content of that article here (I recommend you read it on your own) but will leverage the points he makes there. Definition of Science To ask the question “is data science ‘science’” then we need to start with a definition of terms. Various references put the definition into the same basic areas: Study of the physical world Systematic and/or disciplined study of a subject area ...and then they include the things studied, the bodies of knowledge and so on. The word itself comes from Latin, and means merely “to know” or “to study to know”. Greek divides knowledge further into “truth” (episteme), and practical use or effects (tekhne). Normally computing falls into the second realm. Definition of Data Science And now a more controversial definition: Data Science. This term is so new and perhaps so niche that the major dictionaries haven’t yet picked it up (my OED reference is older – can’t afford to pop for the online registration at present). Researching the term's general use I created an amalgam of the definitions this way: “Studying and applying mathematical and other techniques to derive information from complex data sets.” Using this definition, data science certainly seems to be science - it's learning about and studying some object or area using systematic methods. But implicit within the definition is the word “application”, which makes the process more akin to engineering or even technology than science. In fact, I find that using these techniques – and data itself – part of science, not science itself. I leave out the concept of studying data patterns or algorithms as part of this discipline. That is actually a domain I see within research, mathematics or computer science. That of course is a type of science, but does not seek for practical applications. As part of the argument against calling it “Data Science”, some point to the scientific method of creating a hypothesis, testing with controls, testing results against the hypothesis, and documenting for repeatability.  These are not steps that we often take in working with data. We normally start with a question, and fit patterns and algorithms to predict outcomes and find correlations. In this way Data Science is more akin to statistics (and in fact makes heavy use of them) in the process rather than starting with an assumption and following on with it. So, is Data Science “Science”? I’m uncertain – and I’m uncertain it matters. Even if we are facing rampant “title inflation” these days (does anyone introduce themselves as a secretary or supervisor anymore?) I can tolerate the term at least from the intent that we use data to study problems across a wide spectrum, rather than restricting it to a single domain. And I also understand those who have worked hard to achieve the very honorable title of “scientist” who have issues with those who borrow the term without asking. What do you think? Science, or not? Does it matter?

    Read the article

  • On Reflector Pricing

    - by Nick Harrison
    I have heard a lot of outrage over Red Gate's decision to charge for Reflector. In the interest of full disclosure, I am a fan of Red Gate. I have worked with them on several usability tests. They also sponsor Simple Talk where I publish articles. They are a good company. I am also a BIG fan of Reflector. I have used it since Lutz originally released it. I have written my own add-ins. I have written code to host reflector and use its object model in my own code. Reflector is a beautiful tool. The care that Lutz took to incorporate extensibility is amazing. I have never had difficulty convincing my fellow developers that it is a wonderful tool. Almost always, once anyone sees it in action, it becomes their favorite tool. This wide spread adoption and usability has made it an icon and pivotal pillar in the DotNet community. Even folks with the attitude that if it did not come out of Redmond then it must not be any good, still love it. It is ironic to hear everyone clamoring for it to be released as open source. Reflector was never open source, it was free, but you never were able to peruse the source code and contribute your own changes. You could not even use Reflector to view the source code. From the very beginning, it was never anyone's intention for just anyone to examine the source code and make their own contributions aside from the add-in model. Lutz chose to hand over the reins to Red Gate because he believed that they would be able to build on his original vision and keep the product viable and effective. He did not choose to make it open source, hoping that the community would be up to the challenge. The simplicity and elegance may well have been lost with the "design by committee" nature of open source. Despite being a wonderful and beloved tool, Reflector cannot be an easy tool to maintain. Maybe because it is so wonderful and beloved, it is even more difficult to maintain. At any rate, we have high expectations. Reflector must continue to be able to reasonably disassemble every language construct that the framework and core languages dream up. We want it to be fast, and we also want it to continue to be simple to use. No small order. Red Gate tried to keep the core product free. Sadly there was not enough interest in the Pro version to subsidize the rest of the expenses. $35 is a reasonable cost, more than reasonable. I have read the blog posts and forum posts complaining about the time associated with getting the expense approved. I have heard people complain about the cost being unreasonable if you are a developer from certain countries. Let's do the math. How much of a productivity boost is Reflector? How many hours do you think it saves you in a typical project? The next question is a little easier if you are a contractor or a consultant, but what is your hourly rate? If you are not a contractor, you can probably figure out an hourly rate. How long does it take to get a return on your investment? The value added proposition is not a difficult one to make. I have read people clamoring that Red Gate sucks and is evil. They complain about broken promises and conflicts of interest. Relax! Red Gate is not evil. The world is not coming to an end. The sun will come up tomorrow. I am sure that Red Gate will come up with options for volume licensing or site licensing for companies that want to get a licensed copy for their entire team. Don't panic, and I am sure that many great improvements are on the horizon. Switching the UI to WPF and including a tabbed interface opens up lots of possibilities.

    Read the article

  • How do I cleanly design a central render/animation loop?

    - by mtoast
    I'm learning some graphics programming, and am in the midst of my first such project of any substance. But, I am really struggling at the moment with how to architect it cleanly. Let me explain. To display complicated graphics in my current language of choice (JavaScript -- have you heard of it?), you have to draw graphical content onto a <canvas> element. And to do animation, you must clear the <canvas> after every frame (unless you want previous graphics to remain). Thus, most canvas-related JavaScript demos I've seen have a function like this: function render() { clearCanvas(); // draw stuff here requestAnimationFrame(render); } render, as you may surmise, encapsulates the drawing of a single frame. What a single frame contains at a specific point in time, well... that is determined by the program state. So, in order for my program to do its thing, I just need to look at the state, and decide what to render. Right? Right. But that is more complicated than it seems. My program is called "Critter Clicker". In my program, you see several cute critters bouncing around the screen. Clicking on one of them agitates it, making it bounce around even more. There is also a start screen, which says "Click to start!" prior to the critters being displayed. Here are a few of the objects I'm working with in my program: StartScreenView // represents the start screen CritterTubView // represents the area in which the critters live CritterList // a collection of all the critters Critter // a single critter model CritterView // view of a single critter Nothing too egregious with this, I think. Yet, when I set out to flesh out my render function, I get stuck, because everything I write seems utterly ugly and reminiscent of a certain popular Italian dish. Here are a couple of approaches I've attempted, with my internal thought process included, and unrelated bits excluded for clarity. Approach 1: "It's conditions all the way down" // "I'll just write the program as I think it, one frame at a time." if (assetsLoaded) { if (userClickedToStart) { if (critterTubDisplayed) { if (crittersDisplayed) { forEach(crittersList, function(c) { if (c.wasClickedRecently) { c.getAgitated(); } }); } else { displayCritters(); } } else { displayCritterTub(); } } else { displayStartScreen(); } } That's a very much simplified example. Yet even with only a fraction of all the rendering conditions visible, render is already starting to get out of hand. So, I dispense with that and try another idea: Approach 2: Under the Rug // "Each view object shall be responsible for its own rendering. // "I'll pass each object the program state, and each can render itself." startScreen.render(state); critterTub.render(state); critterList.render(state); In this setup, I've essentially just pushed those crazy nested conditions to a deeper level in the code, hiding them from view. In other words, startScreen.render would check state to see if it needed actually to be drawn or not, and take the correct action. But this seems more like it only solves a code-aesthetic problem. The third and final approach I'm considering that I'll share is the idea that I could invent my own "wheel" to take care of this. I'm envisioning a function that takes a data structure that defines what should happen at any given point in the render call -- revealing the conditions and dependencies as a kind of tree. Approach 3: Mad Scientist renderTree({ phases: ['startScreen', 'critterTub', 'endCredits'], dependencies: { startScreen: ['assetsLoaded'], critterTub: ['startScreenClicked'], critterList ['critterTubDisplayed'] // etc. }, exclusions: { startScreen: ['startScreenClicked'], // etc. } }); That seems kind of cool. I'm not exactly sure how it would actually work, but I can see it being a rather nifty way to express things, especially if I flex some of JavaScript's events. In any case, I'm a little bit stumped because I don't see an obvious way to do this. If you couldn't tell, I'm coming to this from the web development world, and finding that doing animation is a bit more exotic than arranging an MVC application for handling simple requests - responses. What is the clean, established solution to this common-I-would-think problem?

    Read the article

  • Seizing the Moment with Mobility

    - by Divya Malik
    Empowering people to work where they want to work is becoming more critical now with the consumerisation of technology. Employees are bringing their own devices to the workplace and expecting to be productive wherever they are. Sales people welcome the ability to run their critical business applications where they can be most effective which is typically on the road and when they are still with the customer. Oracle has invested many years of research in understanding customer's Mobile requirements. “The keys to building the best user experience were building in a lot of flexibility in ways to support sales, and being useful,” said Arin Bhowmick, Director, CRM, for the Applications UX team. “We did that by talking to and analyzing the needs of a lot of people in different roles.” The team studied real-life sales teams. “We wanted to study salespeople in context with their work,” Bhowmick said. “We studied all user types in the CRM world because we wanted to build a user interface and user experience that would cater to sales representatives, marketing managers, sales managers, and more. Not only did we do studies in our labs, but also we did studies in the field and in mobile environments because salespeople are always on the go.” Here is a recent post from Hernan Capdevila, Vice President, Oracle Fusion Apps which was featured on the Oracle Applications Blog.  Mobile devices are forcing a paradigm shift in the workplace – they’re changing the way businesses can do business and the type of cultures they can nurture. As our customers talk about their mobile needs, we hear them saying they want instant-on access to enterprise data so workers can be more effective at their jobs anywhere, anytime. They also are interested in being more cost effective from an IT point of view. The mobile revolution – with the idea of BYOD (bring your own device) – has added an interesting dynamic because previously IT was driving the employee device strategy and ecosystem. That's been turned on its head with the consumerization of IT. Now employees are figuring out how to use their personal devices for work purposes and IT has to figure out how to adapt. Blurring the Lines between Work and Personal Life My vision of where businesses will be five years from now is that our work lives and personal lives will be more interwoven together. In turn, enterprises will have to determine how to make employees’ work lives fit more into the fabric of their personal lives. And personal devices like smartphones are going to drive significant business value because they let us accomplish things very incrementally. I can be sitting on a train or in a taxi and be productive. At the end of any meeting, I can capture ideas and tasks or follow up with people in real time. Mobile devices enable this notion of seizing the moment – capitalizing on opportunities that might otherwise have slipped away because we're not connected. For the industry shapers out there, this is game changing. The lean and agile workforce is definitely the future. This notion of the board sitting down with the executive team to lay out strategic objectives for a three- to five-year plan, bringing in HR to determine how they're going to staff the strategic activities, kicking off the execution, and then revisiting the plan in three to five years to create another three- to five-year plan is yesterday's model. Businesses that continue to approach innovating in that way are in the dinosaur age. Today it's about incremental planning and incremental execution, which requires a lot of cohesion and synthesis within the workforce. There needs to be this interweaving notion within the workforce about how ideas cascade down, how people engage, how they stay connected, and how insights are shared. How to Survive and Thrive in Today’s Marketplace The notion of Facebook isn’t new. We lived it pre-Internet days with America Online and Prodigy – Facebook is just the renaissance of these services in a more viral and pervasive way. And given the trajectory of the consumerization of IT with people bringing their personal tooling to work, the enterprise has no option but to adapt. The sooner that businesses realize this from a top-down point of view the sooner that they will be able to really drive significant innovation and adapt to the marketplace. There are a small number of companies right now (I think it's closer to 20% rather than 80%, but the number is expanding) that are able to really innovate in this incremental marketplace. So from a competitive point of view, there's no choice but to be social and stay connected. By far the majority of users on Facebook and LinkedIn are mobile users – people on iPhones, smartphones, Android phones, and tablets. It's not the couch people, right? It's the on-the-go people – those people at the coffee shops. Usually when you're sitting at your desk on a big desktop computer, typically you have better things to do than to be on Facebook. This is a topic I'm extremely passionate about because I think mobile devices are game changing. Mobility delivers significant value to businesses – it also brings dramatic simplification from a functional point of view and transforms our work life experience. Hernan Capdevila Vice President, Oracle Applications Development

    Read the article

  • Remote Workers...We're Not That Bad!

    - by user12601034
    I work from home a lot – my team is located in different cities and countries, my manager is in a different city, and most of our work is done via conference calls, email and collaboration through Oracle Social Network. We’ve figured out how to be effective and involve team members, regardless of where we are all located. When I mention that I work from home, a lot of my friends will laugh, roll their eyes or use their fingers to make quotation marks around “work from home.” Their belief is that I’m sitting at home, eating bon-bons and watching television. The attempts at humor only multiply when they know that my husband also mostly works from home. So, it was with great joy that I read the Lifehacker article Why Remote Workers Are More (Yes, More) Engaged. I’m not going to re-write the article for you, but four highlights from the article include: Proximity breeds complacency –because communicating with employees sitting next to you is so easy, you may not do it well. Absence makes people try harder to connect – because you have to make an effort to connect to your team, you tend to pay better attention when you do connect Leaders of virtual team make better use of tools – when working remotely, you will use technology (many different forms of it) to connect with your team. This daily use of the tools makes you more proficient with those tools Leaders of far-flung teams maximize the time spent together – getting together takes effort, time and money, so leaders tend to filter out distractions when teams do get together. These points made me happy because I’ve seen the same things play out in my team located around the world. And I’m not saying that a virtual team is more effective than a co-located team – but my virtual team doesn’t have the option of filing into a conference room for a face-to-face meeting whenever we want. Instead, we have to figure out how to work effectively without meeting face-to-face. Am I more engaged as a remote worker? I’d like to think that I am. I’ve been on calls with colleagues at 3am – this would never happen if my only option was to be in the office. I can leave my “office” to pick up my kids from school…and I’m willingly back online after kids are in bed to finish up anything I need to. Oracle Social Network lets me use my iPad to engage with my teammates when I’m waiting at music lessons, the doctor’s office or any place else with a network connection. I feel like I’m more connected with my team, and I feel like I’m more connected with my family life. So yes, I am a remote worker, and I am engaged. If you lead a virtual team, I challenge you to increase the ways that you communicate to effectively engage your team. If you are on a virtual team, I challenge you to think about how you might interact with team members to keep both them and yourself engaged in your work. And if you have some great ideas on how to make virtual teams (and workers) effective and engaged, please share those ideas in the comments! Now, if you’ll excuse me, I need to go get a bon-bon...   :) Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Black Screen: How to set Projection/View Matrix

    - by Lisa
    I have a Windows Phone 8 C#/XAML with DirectX component project. I'm rendering some particles, but each particle is a rectangle versus a square (as I've set the vertices to be positions equally offset from each other). I used an Identity matrix in the view and projection matrix. I decided to add the windows aspect ratio to prevent the rectangles. But now I get a black screen. None of the particles are rendered now. I don't know what's wrong with my matrices. Can anyone see the problem? These are the default matrices in Microsoft's project example. View Matrix: XMVECTOR eye = XMVectorSet(0.0f, 0.7f, 1.5f, 0.0f); XMVECTOR at = XMVectorSet(0.0f, -0.1f, 0.0f, 0.0f); XMVECTOR up = XMVectorSet(0.0f, 1.0f, 0.0f, 0.0f); XMStoreFloat4x4(&m_constantBufferData.view, XMMatrixTranspose(XMMatrixLookAtRH(eye, at, up))); Projection Matrix: void CubeRenderer::CreateWindowSizeDependentResources() { Direct3DBase::CreateWindowSizeDependentResources(); float aspectRatio = m_windowBounds.Width / m_windowBounds.Height; float fovAngleY = 70.0f * XM_PI / 180.0f; if (aspectRatio < 1.0f) { fovAngleY /= aspectRatio; } XMStoreFloat4x4(&m_constantBufferData.projection, XMMatrixTranspose(XMMatrixPerspectiveFovRH(fovAngleY, aspectRatio, 0.01f, 100.0f))); } I've tried modifying them to use cocos2dx's WP8 example. XMMATRIX identityMatrix = XMMatrixIdentity(); float fovy = 60.0f; float aspect = m_windowBounds.Width / m_windowBounds.Height; float zNear = 0.1f; float zFar = 100.0f; float xmin, xmax, ymin, ymax; ymax = zNear * tanf(fovy * XM_PI / 360); ymin = -ymax; xmin = ymin * aspect; xmax = ymax * aspect; XMMATRIX tmpMatrix = XMMatrixPerspectiveOffCenterRH(xmin, xmax, ymin, ymax, zNear, zFar); XMMATRIX projectionMatrix = XMMatrixMultiply(tmpMatrix, identityMatrix); // View Matrix float fEyeX = m_windowBounds.Width * 0.5f; float fEyeY = m_windowBounds.Height * 0.5f; float fEyeZ = m_windowBounds.Height / 1.1566f; float fLookAtX = m_windowBounds.Width * 0.5f; float fLookAtY = m_windowBounds.Height * 0.5f; float fLookAtZ = 0.0f; float fUpX = 0.0f; float fUpY = 1.0f; float fUpZ = 0.0f; XMMATRIX tmpMatrix2 = XMMatrixLookAtRH(XMVectorSet(fEyeX,fEyeY,fEyeZ,0.f), XMVectorSet(fLookAtX,fLookAtY,fLookAtZ,0.f), XMVectorSet(fUpX,fUpY,fUpZ,0.f)); XMMATRIX viewMatrix = XMMatrixMultiply(tmpMatrix2, identityMatrix); XMStoreFloat4x4(&m_constantBufferData.view, viewMatrix); Vertex Shader cbuffer ModelViewProjectionConstantBuffer : register(b0) { //matrix model; matrix view; matrix projection; }; struct VertexInputType { float4 position : POSITION; float2 tex : TEXCOORD0; float4 color : COLOR; }; struct PixelInputType { float4 position : SV_POSITION; float2 tex : TEXCOORD0; float4 color : COLOR; }; PixelInputType main(VertexInputType input) { PixelInputType output; // Change the position vector to be 4 units for proper matrix calculations. input.position.w = 1.0f; //===================================== // TODO: ADDED for testing input.position.z = 0.0f; //===================================== // Calculate the position of the vertex against the world, view, and projection matrices. //output.position = mul(input.position, model); output.position = mul(input.position, view); output.position = mul(output.position, projection); // Store the texture coordinates for the pixel shader. output.tex = input.tex; // Store the particle color for the pixel shader. output.color = input.color; return output; } Before I render the shader, I set the view/projection matrices into the constant buffer void ParticleRenderer::SetShaderParameters() { ViewProjectionConstantBuffer* dataPtr; D3D11_MAPPED_SUBRESOURCE mappedResource; DX::ThrowIfFailed(m_d3dContext->Map(m_constantBuffer.Get(), 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource)); dataPtr = (ViewProjectionConstantBuffer*)mappedResource.pData; dataPtr->view = m_constantBufferData.view; dataPtr->projection = m_constantBufferData.projection; m_d3dContext->Unmap(m_constantBuffer.Get(), 0); // Now set the constant buffer in the vertex shader with the updated values. m_d3dContext->VSSetConstantBuffers(0, 1, m_constantBuffer.GetAddressOf() ); // Set shader texture resource in the pixel shader. m_d3dContext->PSSetShaderResources(0, 1, &m_textureView); } Nothing, black screen... I tried so many different look at, eye, and up vectors. I tried transposing the matrices. I've set the particle center position to always be (0, 0, 0), I tried different positions too, just to make sure they're not being rendered offscreen.

    Read the article

  • ADF version of "Modern" dialog windows

    - by Martin Deh
    It is no surprise with the popularity of the i-devices (iphone, ipad), that many of the iOS UI based LnF (look and feel) would start to inspire web designers to incorporate the same LnF into their web sites.  Take for example, a normal dialog popup.  In the iOS world, the LnF becomes a bit more elegant by add just a simple element as a "floating" close button: In this blog post, I will describe how this can be accomplished using OOTB ADF components and CSS3 style elements. There are two ways that this can be achieved.  The easiest way is to simply replace the default image, which looks like this, and adjust the af|panelWindow:close-icon-style skin selector.   Using this simple technique, you can come up with this: The CSS code to produce this effect is pretty straight forward: af|panelWindow.test::close-icon-style{    background-image: url("../popClose.gif");    line-height: 10px;    position: absolute;    right: -10px;    top: -10px;    height:38px;    width:38px;    outline:none; } You can see from the CSS, the position of the region, which holds the image, is relocated based on the position based attributes.  Also, the addition of the "outline" attribute removes the border that is visible in Chrome and IE.  The second example, is based on not having an image to produce the close button.  Like the previous sample, I will use the OOTB panelWindow.  However, this time I will use a OOTB commandButton to replace the image.  The construct of the components looks like this: The commandButton is positioned first in the hierarchy making the re-positioning easier.  The commandButton will also need a style class assigned to it (i.e. closeButton), which will allow for the positioning and the over-riding of the default skin attributes of a default button.  In addition, the closeIconVisible property is set to false, since the default icon is no longer needed.  Once this is done, the rest is in the CSS.  Here is the sample that I created that was used for an actual customer POC: The CSS code for the button: af|commandButton.closeButton, af|commandButton.closeButton af|commandButton:text-only{     line-height: 10px;     position: absolute;     right: -10px;     top: -10px;     -webkit-border-radius: 70px;     -moz-border-radius: 70px;     -ms-border-radius: 70px;     border-radius: 70px;     background-image:none;     border:#828c95 1px solid;     background-color:black;     font-weight: bold;     text-align: center;     text-decoration: none;     color:white;     height:30px;     width:30px;     outline:none; } The CSS uses the border radius to create the round effect on the button (in IE 8, since border-radius is not supported, this will only work with some added code). Also, I add the box-shadow attribute to the panelWindow style class to give it a nice shadowing effect.

    Read the article

  • What developer conferences are you going to this year?

    - by mbcrump
    This short list is what I consider to be the “cream-of-the-crop” in developer conferences. This is also a list of the conferences that I plan on attending in 2011. If you feel your conference is just as good, then shoot me an email at [michael[at]michaelcrump[dot]net, and if possible I will check it out.   In-Person Event Las Vegas on April 18th-22nd, 2011 Redmond on October 17th-21st, 2011 Orlando on December 5th-9th, 2011 Visual Studio Live – I attended this event in November of last year and blogged about my experience. I am also planning on going back to the Orlando session in December of this year. So what did I like the most about this event? Being able to interact one-on-one with a majority of the speakers. If you read my blog post then you will see a list of the speakers that I met up with. I also made a lot of great connections with other professional developers all over the world. They are having an event in Las Vegas on April 18th-22nd. I noticed at this event that they have added a new track on mobile. Being a big fan of mobile, I feel that this is a great move. They also have a great selection for Silverlight Developers including Billy Hollis and Rocky Lhotka. For the full lineup of conference tracks, sessions and speakers visit http://bit.ly/VSLiveTrks. If you are interested in this then you can register here by February 16th. I must add that you can save $300 bucks by getting the early-bird special.   Virtual Conference SSWUG (DBTechCon) - holds the largest virtual conference in the information technology industry. It is also special to me because they selected a majority of my Silverlight content for the April conference. No traveling fees and all of the sessions are recorded so you can watch them on-demand for $189 bucks (early-bird special). For the entire speaker list then click here. The session list has also been published. If you are interested in this then you can register here.   In-Person Event Knoxville, TN on June 3rd/4th 2011. Codestock.org – If you live in the South then you have heard of CodeStock. To my knowledge, they have only had 3 events so far and they were a huge success. It was such a success that after the last event, everyone was telling me how good it was and how much they enjoyed it. They currently have a call for speakers going on right now, so if you have sessions then be sure to submit yours. So, what makes them stand out? Well for starters Michael Neal (organizer) developed an open API so conference attendees could build their own apps for the sessions. They also encouraged their speakers to go to other sessions instead of stay in a “speaker-room”. Another cool feature is that they are uploading videos from the conference so everyone can benefit. They are currently looking for sponsorship, so help out if you can.   In-Person Event Redmond, WA on October 28/29 2011 *NOT 100% SURE AT THIS POINT* PDC 11 – OK, so the logo should be pdc11 but its not out yet. This event is located on Microsoft’s campus in Redmond, WA. It is probably one of the most well known conferences for developers to attend. One of the big perks from this event is that you typically come away with free stuff. In 2010 they gave away Windows 7 Phones. I remember years earlier they gave away laptops. This of course isn’t the only reason to go, you may get to tour the Microsoft campus. Since pdc is a huge event, you can view all the events for free. Mike Taulty created a nice Silverlight application that consumes the OData feed. You can download it here. If everything goes as planned, I will be at all of these events. If you plan on going then send me a tweet and we will do lunch or dinner. I love meeting new developers and talking .net.  Subscribe to my feed

    Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >