Search Results

Search found 11316 results on 453 pages for 'ip geolocation'.

Page 333/453 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

• Clearos open vpn vs windows open vpn client where client connects with no default gateway

  - by Paul

  Am using clearos as open vpn server and configured my users on windows machine with open vpn client. My problem is that users connect to the server without a default gateway and also with ip conflicts, i can ping the server but i can not ping any user behind the server. please any one can help to find out what causes the clients to connect without a default gateway and also not to be able to ping any user behind the clearos open vpn server. Help with a step by step guide of installing open vpn on clearos and open vpn clients on windows. Thanks

  Read the article

• How can I disrupt my roommate's BitTorrent?

  - by bob

  We're on a 50 mb/s Comcast connection and our connection right now is coming in under 1.5 mb/s. Our roommate left for a week with BitTorrent running (Azureus client, we think). Our latency is approaching 300 ms. His door is locked up tight, and both his machine and the router for the house are located inside. I've even flipped the power breaker in the house and that barely works for 2 minutes. His laptop keeps on running, and once the cable modem and router come back up and the machine reconnects, the torrents resume in earnest. I've been running nmap and identified his IP on our LAN. Is there anything I can do over the LAN to make his torrents start to fail or slow down?

  Read the article

• Can I create a DC without a DNS Server?

  - by onik

  So as the title says, I need to promote a standalone Win2008R2 server to a Domain Controller, and I don't a DNS Server (I think), as there will be no clients connected to the domain, it will be only used for Remote Desktop Services. Yes, I know, it's considered bad practice to install other roles on the DC, but in this case, it's necessary. Do I need to install the DNS Server, and if I do, how to make it as transparent as possible? EDIT: Seems that I need to install the DNS Server, so I can I configure it not to mess up my entire domain? For example: The server I need to promote is rdc.mydomain.com, and it has an A entry to it's IP in the current DNS, while other servers under mydomain.com are running Linux and don't need to know anything about this Windows box. The domain uses a third-party DNS and all edits and updates need to be done via a separate web page, our servers don't have write/update access.

  Read the article

• How to make nginx only respond to one domain?

  - by larryzhao

  I am pretty new to nginx, I host my rails application on nginx+passenger. I want my website to be accessible to only one domain. So I set my nginx conf like the following: server { listen 80; server_name mydomain.com www.mydomain.com; root /var/deploy/myapp/current/public; passenger_enabled on; location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 1y; add_header Cache-Control public; } } I specify the server_name directive, but still, it answers anything which points to this IP and I could see that in the access.log that it answers to other domain names. Is there anything I am doing wrong?

  Read the article

• check_ssh executed from Nagios server returns "Server answer: ", nothing else

  - by phs

  Commmand works on the host I need to monitor (its IP is denoted as $HOSTADDRESS$ here): [root@host ~]# /usr/local/nagios/libexec/check_ssh localhost SSH OK - OpenSSH_4.3 (protocol 2.0) However, on the Nagios server, it does not: root@server:~# /usr/lib/nagios/plugins/check_ssh -H $HOSTADDRESS$ Server answer: I can see that the port is open: root@server:~# /usr/lib/nagios/plugins/check_tcp -H $HOSTADDRESS$ -p 22 TCP OK - 0.123 second response time on port 22|time=0.123277s;;;0.000000;10.000000 And I can verify with telnet: root@server:/etc/nagios3/conf.d# telnet $HOSTADDRESS$ 22 Trying $HOSTADDRESS$... Connected to $HOSTADDRESS$. Escape character is '^]'. After searching the web for two hours and trying different suggestions I am out of ideas. I have several other hosts with similar setup, and they don't have this problem. I have compared the configs and they look the same (I think). I am clearly missing something here.

  Read the article

• How do I make a virtualised WAN?

  - by EnchantedEggs

  I want to create a virtualised WAN. As in, I want to have a couple of VMs (VBox) on one physical host machine, that exist on separate LANs, but that can talk to each other. Do I make the VMs, set them up with different IP addresses (e.g. 1.2.3.4 and 5.6.7.8) and then configure port forwarding between them somehow??? I've seen articles that set up port forwarding on port 2222, but I don't really understand why this works. How is setting up the VM to listen to port 2222 and then port forward from there to, say, port 80, any different from just telling the VM to listen on port 80 in the first place? FYI, the VMs run Ubuntu Desktop 14.x.

  Read the article

• Wireless is connected but no internet when PC Turns on

  - by mhesabi

  I have a PC that is connected to ADSL Modem router (linksys WAG54g2) directly via Ethernet cable And a laptop and also other devices such as another laptops and smarth phones. However when I turn On the PC or turn it off, some strange problem happens. My wireless network seems connected on laptop but there is no internet activity and can't open a webpage until I turn router off and on again manually. (other devices including the PC itself can't use the internet either) My router configured this way: Encapsulation: RFC 2516 PPPoE Multiplexing: LLC DHCP Server: Enabled and network sharing center IPv4 configuration is obtain IP address automatically How Can I fix this issue?

  Read the article

• connecting to internal webserver on specific port

  - by bergin

  Hello, We have the BT broadband forwarding on to an internal machine with an IIS web server running. Thats fine, it goes to the sharepoint app, so the outside world can see this app. Thing is we need another app running (a MVC ASP.Net app) and I have set it to :8080. Internally I can get to it fine, but not when I type the IP number. eg. 80.100.232.129:8080 is this something I need to set on the broadband router or something with SBS or somewhere else? thanks in advance

  Read the article

• Browsing is much slower on one PC wired to the same router - why?

  - by deanalt

  Wife is not happy. It takes about 5 seconds to open a google window, versus about 1 second on the faster computer which is about 3 years old itself. Yes, it is an older computer (5 -6 years old, I'd guess), surely with less RAM, but for simple browsing, should it matter? Both are hardwired to the same Netgear Rangemax router. Both use fixed IP addresses. Both are XP. Both have about 8 feet of cable to the router. I have the fastest service my cable provides. Probably irrelevant but ...two newer MACs are connected wirelessely during the summer and they are even faster, but I think that's the difference in browsers. If you could point me to a list of process of elimination steps that would be most appreciated. Thanks Dean

  Read the article

• No blocked ports on internal interface of ASA

  - by blsub6

  I have a cisco ASA 5505 with three interfaces: Internal (100), DMZ (50) and External (0). The internal has a IPSEC VPN tunnel to my internal network I couldn't log in to my domain because of all of the port restrictions and such. I tried monitoring the traffic through the interface, seeing what it's blocking and then unblocking those ports but even then it didn't work completely correctly I finally just added a rule to permit any ip traffic from any network to any network on the internal interface and, of course, it worked fine But is that good security practice? Should I be blocking ports on an interface that's internal and over a VPN with the highest security level?

  Read the article

• Why does my webpage look different when I connect using different routers?! Does routers cache files?

  - by Ayyash

  Here is the case, I am working on a site from office and home, I recently updated the stylesheets and logged in the live site from office (using my same laptop I use all the time), and everything looks okay, I come home use my home internet connection to connect to the site using the SAME laptop, the styles are not updated! The thing is: this happens on ALL browsers, and after emptying the cache many times, and even after one month of work, and even if I have never opened the site before on that browser (as if my router has a cache of its own) Another thing: only one particular styles.css file seem to be hanging Extra info: I use the same IP for my home wireless router as that defined in the office, the usual 192.168.0.1

  Read the article

• Does setting an A record for a root domain set it (automatically) for subdomains?

  - by Edan Maor

  I bought a domain from Dreamhost, but my servers are actually running on Amazon's AWS. I have an Elastic IP, say 1.1.1.1. In the Dreamhost panel, I've added an A record for my domain name, pointing it to 1.1.1.1. My question is, are all subdomains (e.g. www.mydomain.com, a.mydomain.com, etc.) automatically mapped to 1.1.1.1 as well, because the root is? Or do I have to add separate rules for each subdomain?

  Read the article

• Startech SVx41HDI Series Server Remote Control Usage Question - How do I switch away from a dead por

  - by tajh

  We have a Startech KVM over IP model SV841HDI and it was stuck pointing a port where the machine has been removed. We ended up having to physically plug something into that port in order to switch ports again, meaning that if someone in support accidentally switches to an empty port, we need to have a documented solution for making it useable again. The unit is old, no longer under warranty, firmware updates for it are no longer available (interestingly it runs a powerPC version of busybox). Since it does work well except for this one catch, we would like to avoid replacing it. Reading the manual, you have a several recommended methods. I tried them. Hit the left CTRL key a few times (as well as all the other popular KVM keys I could think of). The VNC GUI offers lots of buttons - none of them switch away from a dead port. The question is: how do I switch away from a dead port on this particular KVM remotely?

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system? [migrated]

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• private subnet nat (openvpn / racoon)

  - by Jonas Schnelli

  I have a openvpn subnet 10.8.0.0/24 running one server and one client (laptop). openvpn works fine. Browsing the web over openvpn from the laptop works also fine. Now on the server there is a private subnet with 10.7.8.128/28. The subnet is set up with racoon (IPSEC s2s vpn). The s2s vpn allows me to access the subnet 10.3.5.0/24 at the other s2s vpn end. Works all fine when I'm connected with ssh to my server. From my laptop i can ping 10.7.8.129 (the servers ipsec local ip) but i cannot reach the net 10.3.5.0/24. I tried to add a static route on my laptop 10.3.5.0/24 over gw 10.7.8.129 with no success. Any ideas how i do setup the nat / routing? Thanks

  Read the article

• Wireless only connects to Google

  - by dmanxiii

  I am using a netgear wireless router to connect to create a wireless network. When connected to the router via an Ethernet cable everything works correctly. When connecting to the router via wireless only Google can be accessed. I've done searches via Google using random words to make sure that it is not a cached page, and these all work. However, trying to connect to any non Google domain the page fails to load. I've accessed the connection with two different laptops, both are running Windows Vista. The network connection is strong on both, but the issue persists for both. Edit: I have configured the wireless networks name and password, and connect to that using the credentials I have defined. I am sure I am not connecting to a neighbors wireless network. Edit2: Typing in the direct IP address for CNN.com ( http://157.166.255.19 ) would not resolve.

  Read the article

• export block device over network without root

  - by dschatz

  I'm trying to export a file as a block device over the network. I do not have root access on the machine where the file exists. I do have root access on the machine(s) where I will mount the block device. I've seen ATA-Over-Ethernet and ISCSI but there don't seem to be any implementations which allow me to export the block without root at least (some even require kernel modules). Is there an implementation of either of these or some other protocol that doesn't require root? Perhaps I can tunnel ethernet over IP to do this?

  Read the article

• Any good phone system on a Windows Environment ?

  - by Kedare

  Hello, I am looking for a phone system that integrate well with a (almost) 100% Microsoft. I would like something that can integrate with Exchange and Active Directory (in-phone searching/calling by name (is this possible using SIP ?), etc) and if possible something not too expensive (Bye bye Cisco !), what do you recommend me ? I've heard of 3CX as IPBX and Aastra as Phones, are they good for this ? Or do you know something else good at this ? I've also seen some Alcatel IP Phones doing this (search by name, but I think that was a separated address book and not loaded from AD/Exchange) Thank you !

  Read the article

• Unable to connect with PPTP (From Windows 8 to Ubuntu 12.10)

  - by jaja

  I'm trying to connect using PPTP to my VPS. At first, I got the problem that my connection (Wlan, which is what I use to connect to the Internet) goes "limited" (I can't connect to the Internet) when I connect to the VPN. Then, I used to get some long message, something like you might be trying using L2TP. Then now it's back again to the "limited" problem. What's the solution to that problem? One thing I'm not sure of is what I put as my local IP address in "sudo nano /etc/pptpd.conf" Is it 127.0.0.1? I'm following this tutorial: http://thesinclairs.gotdns.com/blog/set-up-a-pptp-vpn-on-ubuntu-server/

  Read the article

• Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

  - by MarianoC

  Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, I am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now I get this error when I try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do I need to change in order my win xp join the domain

  Read the article

• Unable to access internet if wireless enabled

  - by balki

  The following is my route output. eth0 is my wired network and eth1 is my wireless network. Only wired one has access to internet. If I enable wireless, I am not able to access internet, it tries to access via eth1 and I get 404 page of the wireless router. Why does eth1 have higher preference though default is eth0 (link)? [balakrishnan@mylap ~]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.26.0.1 0.0.0.0 UG 0 0 0 eth0 10.26.0.0 * 255.255.192.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 * 255.255.255.0 U 9 0 0 eth1

  Read the article

• NAT for static private addresses

  - by biggdman

  Could someone please help me out with the following scenario: I have a machine that hosts 3 lxc containers, and acts like a router for them. The LXC containers have private ip addresses set on the interfaces that are connected to the host. I want to provide Internet access to the containers and I want to configure the host system so it translates only the addresses that are configured static on the lxc containers interfaces. Should I try to configure the host so it translates each of the 3 private addresses to the public address of the host's interface that is connected to the Internet?

  Read the article

• Is it effective installing firewall within same machine which offering service?

  - by Eonil

  I'm a starting a small service practically. And I have single server currently. No money to purchase separated/dedicated firewall equipment now. Is it effective installing firewall software on same machine which offering internet service? My server will offer HTTP, NFS, and SSH, and custom made server software on a several ports. (edit) All services (except NFS) should be open to internet. Not internal services. I guess my machine (virtualized within Xen) is connected to the internet directly because I can connect to my machine SSH with only IP address. (edit) NFS is not open to internet. Sorry for my mistake. NFS will be served via SSH only.

  Read the article

• CoovaAP router does not get DHCP settings from modem

  - by Dan Sosedoff

  Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

  Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >