Search Results

Search found 9952 results on 399 pages for 'more details'.

Page 333/399 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

• Synchronous Actions

  - by Dan Krasinski-Oracle

  Since the introduction of SMF, svcadm(1M) has had the ability to enable or disable a service instance and wait for that service instance to reach a final state.  With Oracle Solaris 11.2, we’ve expanded the set of administrative actions which can be invoked synchronously. Now all subcommands of svcadm(1M) have synchronous behavior. Let’s take a look at the new usage: Usage: svcadm [-v] [cmd [args ... ]] svcadm enable [-rt] [-s [-T timeout]] <service> ... enable and online service(s) svcadm disable [-t] [-s [-T timeout]] <service> ... disable and offline service(s) svcadm restart [-s [-T timeout]] <service> ... restart specified service(s) svcadm refresh [-s [-T timeout]] <service> ... re-read service configuration svcadm mark [-It] [-s [-T timeout]] <state> <service> ... set maintenance state svcadm clear [-s [-T timeout]] <service> ... clear maintenance state svcadm milestone [-d] [-s [-T timeout]] <milestone> advance to a service milestone svcadm delegate [-s] <restarter> <svc> ... delegate service to a restarter As you can see, each subcommand now has a ‘-s’ flag. That flag tells svcadm(1M) to wait for the subcommand to complete before returning. For enables, that means waiting until the instance is either ‘online’ or in the ‘maintenance’ state. For disable, the instance must reach the ‘disabled’ state. Other subcommands complete when: restart A restart is considered complete once the instance has gone offline after running the ‘stop’ method, and then has either returned to the ‘online’ state or has entered the ‘maintenance’ state. refresh If an instance is in the ‘online’ state, a refresh is considered complete once the ‘refresh’ method for the instance has finished. mark maintenance Marking an instance for maintenance completes when the instance has reached the ‘maintenance’ state. mark degraded Marking an instance as degraded completes when the instance has reached the ‘degraded’ state from the ‘online’ state. milestone A milestone transition can occur in one of two directions. Either the transition moves from a lower milestone to a higher one, or from a higher one to a lower one. When moving to a higher milestone, the transition is considered complete when the instance representing that milestone reaches the ‘online’ state. The transition to a lower milestone, on the other hand, completes only when all instances which are part of higher milestones have reached the ‘disabled’ state. That’s not the whole story. svcadm(1M) will also try to determine if the actions initiated by a particular subcommand cannot complete. Trying to enable an instance which does not have its dependencies satisfied, for example, will cause svcadm(1M) to terminate before that instance reaches the ‘online’ state. You’ll also notice the optional ‘-T’ flag which can be used in conjunction with the ‘-s’ flag. This flag sets a timeout, in seconds, after which svcadm gives up on waiting for the subcommand to complete and terminates. This is useful in many cases, but in particular when the start method for an instance has an infinite timeout but might get stuck waiting for some resource that may never become available. For the C-oriented, each of these administrative actions has a corresponding function in libscf(3SCF), with names like smf_enable_instance_synchronous(3SCF) and smf_restart_instance_synchronous(3SCF).  Take a look at smf_enable_instance_synchronous(3SCF) for details.

  Read the article

• Oracle MAA Part 1: When One Size Does Not Fit All

  - by JoeMeeks

  The good news is that Oracle Maximum Availability Architecture (MAA) best practices combined with Oracle Database 12c (see video) introduce first-in-the-industry database capabilities that truly make unplanned outages and planned maintenance transparent to users. The trouble with such good news is that Oracle’s enthusiasm in evangelizing its latest innovations may leave some to wonder if we’ve lost sight of the fact that not all database applications are created equal. Afterall, many databases don’t have the business requirements for high availability and data protection that require all of Oracle’s ‘stuff’. For many real world applications, a controlled amount of downtime and/or data loss is OK if it saves money and effort. Well, not to worry. Oracle knows that enterprises need solutions that address the full continuum of requirements for data protection and availability. Oracle MAA accomplishes this by defining four HA service level tiers: BRONZE, SILVER, GOLD and PLATINUM. The figure below shows the progression in service levels provided by each tier. Each tier uses a different MAA reference architecture to deploy the optimal set of Oracle HA capabilities that reliably achieve a given service level (SLA) at the lowest cost.  Each tier includes all of the capabilities of the previous tier and builds upon the architecture to handle an expanded fault domain. Bronze is appropriate for databases where simple restart or restore from backup is ‘HA enough’. Bronze is based upon a single instance Oracle Database with MAA best practices that use the many capabilities for data protection and HA included with every Oracle Enterprise Edition license. Oracle-optimized backups using Oracle Recovery Manager (RMAN) provide data protection and are used to restore availability should an outage prevent the database from being able to restart. Silver provides an additional level of HA for databases that require minimal or zero downtime in the event of database instance or server failure as well as many types of planned maintenance. Silver adds clustering technology - either Oracle RAC or RAC One Node. RMAN provides database-optimized backups to protect data and restore availability should an outage prevent the cluster from being able to restart. Gold raises the game substantially for business critical applications that can’t accept vulnerability to single points-of-failure. Gold adds database-aware replication technologies, Active Data Guard and Oracle GoldenGate, which synchronize one or more replicas of the production database to provide real time data protection and availability. Database-aware replication greatly increases HA and data protection beyond what is possible with storage replication technologies. It also reduces cost while improving return on investment by actively utilizing all replicas at all times. Platinum introduces all of the sexy new Oracle Database 12c capabilities that Oracle staff will gush over with great enthusiasm. These capabilities include Application Continuity for reliable replay of in-flight transactions that masks outages from users; Active Data Guard Far Sync for zero data loss protection at any distance; new Oracle GoldenGate enhancements for zero downtime upgrades and migrations; and Global Data Services for automated service management and workload balancing in replicated database environments. Each of these technologies requires additional effort to implement. But they deliver substantial value for your most critical applications where downtime and data loss are not an option. The MAA reference architectures are inherently designed to address conflicting realities. On one hand, not every application has the same objectives for availability and data protection – the Not One Size Fits All title of this blog post. On the other hand, standard infrastructure is an operational requirement and a business necessity in order to reduce complexity and cost. MAA reference architectures address both realities by providing a standard infrastructure optimized for Oracle Database that enables you to dial-in the level of HA appropriate for different service level requirements. This makes it simple to move a database from one HA tier to the next should business requirements change, or from one hardware platform to another – whether it’s your favorite non-Oracle vendor or an Oracle Engineered System. Please stay tuned for additional blog posts in this series that dive into the details of each MAA reference architecture. Meanwhile, more information on Oracle HA solutions and the Maximum Availability Architecture can be found at: Oracle Maximum Availability Architecture - Webcast Maximize Availability with Oracle Database 12c - Technical White Paper

  Read the article

• Big Data – ClustrixDB – Extreme Scale SQL Database with Real-time Analytics, Releases Software Download – NewSQL

  - by Pinal Dave

  There are so many things to learn and there is so little time we all have. As we have little time we need to be selective to learn whatever we learn. I believe I know quite a lot of things in SQL but I still do not know what is around SQL. I have started to learn about NewSQL recently. If you wonder what is NewSQL I encourage all of you to read my blog post about NewSQL over here Big Data – Buzz Words: What is NewSQL – Day 10 of 21. NewSQL databases are quickly becoming popular – providing the scale of NoSQL with the SQL features and transactions. As a part of learning NewSQL database, I have recently started to learn about ClustrixDB. ClustrixDB has been the most mature NewSQL database used by some of the largest internet sites in the world for over 3 years, with extensive SQL support. In addition to scale, it provides fast real-time analytics by bringing massively parallel processing (MPP), available only in warehousing databases, to the transactional database. The reason I am more intrigued about learning ClustrixDB is their recent announcement on Oct 31. ClustrixDB was only available as an appliance, but now with their software release on Oct 31, everyone can use it. It is now available as forever free for up to 12 cores with community support, and there is a 45 day trial for unlimited cluster sizes. With the forever free world, I am indeed interested in ClustrixDB now. I know that few of the leading eCommerce sites in the world uses them for their transactional database. Here are few of the details I have quickly noted for ClustrixDB. ClustrixDB allows user to: Scale by simply adding nodes to the cluster with a single command Run billions of transactions a day Run fast real-time analytics Achieve high-availability with recovery from node failure Manages itself Easily migrate from MySQL as it is nearly plug-and-play compatible, use MySQL drivers, tools and replication. While I was going through the documentation I realized that ClustrixDB also has extensive support for SQL features including complex queries involving joins on a dozen or more tables, aggregates, sorts, sub-queries. It also supports stored procedures, triggers, foreign keys, partitioned and temporary tables, and fully online schema changes. It is indeed a very matured product and SQL solution. Indeed Clusterix sound very promising solution, I decided to dig a bit deeper to understand who are current customers of the Clustrix as they exist in the industry for quite a few years. Their client list is indeed very interesting and here is my quick research about them. Twoo.com – Europe’s largest social discovery (dating) site runs 4.4 Billion Transactions a day with table sizes over a Terabyte, on a 168 core cluster. EngageBDR – Top 3 in the online advertising category uses ClustrixDB to serve 6.9 billion ads a day through real-time bidding platform. Their reports went from 4 hours to 15 seconds. NoMoreRack – Top 2 fastest growing e-commerce company in US used ClustrixDB for high availability and fast growth through Amazon cloud. MakeMyTrip – India’s leading travel site runs on ClustrixDB with two clusters running as multi-master in Chennai and Bangalore. Many enterprises such as AOL, CSC, Rakuten, Symantec use ClustrixDB when their applications need scale. I must accept that I am impressed with the information I have learned so far and now is the time to do some hand’s on experience with their product. I want to learn this technology so in future when it is about NewSQL, I know what I am talking about. Read more why Clustrix explains why you ClustrixDB might be the right database for you. Download ClustrixDB with me today and install it on your machine so in future when we discuss the technical aspects of it, we all are on the same page. The software can be downloaded here. Reference : Pinal Dave (http://blog.SQLAuthority.com)Filed under: Big Data, MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Clustrix

  Read the article

• PASS Summit 2012: keynote and Mobile BI announcements #sqlpass

  - by Marco Russo (SQLBI)

  Today at PASS Summit 2012 there have been several announcements during the keynote. Moreover, other news have not been highlighted in the keynote but are equally if not more important for the BI community. Let’s start from the big news in the keynote (other details on SQL Server Blog): Hekaton: this is the codename for in-memory OLTP technology that will appear (I suppose) in the next release of the SQL Server relational engine. The improvement in performance and scalability is impressive and it enables new scenarios. I’m curious to see whether it can be used also to improve ETL performance and how it differs from using SSD technology. Updates on Columnstore: In the next major release of SQL Server the columnstore indexes will be updatable and it will be possible to create a clustered index with Columnstore index. This is really a great news for near real-time reporting needs! Polybase: in 2013 it will debut SQL Server 2012 Parallel Data Warehouse (PDW), which will include the Polybase technology. By using Polybase a single T-SQL query will run queries across relational data and Hadoop data. A single query language for both. Sounds really interesting for using BigData in a more integrated way with existing relational databases. And, of course, to load a data warehouse using BigData, which is the ultimate goal that we all BI Pro have, right? SQL Server 2012 SP1: the Service Pack 1 for SQL Server 2012 is available now and it enable the use of PowerPivot for SharePoint and Power View on a SharePoint 2013 installation with Excel 2013. Power View works with Multidimensional cube: the long-awaited feature of being able to use PowerPivot with Multidimensional cubes has been shown by Amir Netz in an amazing demonstration during the keynote. The interesting thing is that the data model behind was based on a many-to-many relationship (something that is not fully supported by Power View with Tabular models). Another interesting aspect is that it is Analysis Services 2012 that supports DAX queries run on a Multidimensional model, enabling the use of any future tool generating DAX queries on top of a Multidimensional model. There are still no info about availability by now, but this is *not* included in SQL Server 2012 SP1. So what about Mobile BI? Well, even if not announced during the keynote, there is a dedicated session on this topic and there are very important news in this area: iOS, Android and Microsoft mobile platforms: the commitment is to get data exploration and visualization capabilities working within June 2013. This should impact at least Power View and SharePoint/Excel Services. This is the type of UI experience we are all waiting for, in order to satisfy the requests coming from users and customers. The important news here is that native applications will be available for both iOS and Windows 8 so it seems that Android will be supported initially only through the web. Unfortunately we haven’t seen any demo, so it’s not clear what will be the offline navigation experience (and whether there will be one). But at least we know that Microsoft is working on native applications in this area. I’m not too surprised that HTML5 is not the magic bullet for all the platforms. The next PASS Business Analytics conference in 2013 seems a good place to see this in action, even if I hope we don’t have to wait other six months before seeing some demo of native BI applications on mobile platforms! Viewing Reporting Services reports on iPad is supported starting with SQL Server 2012 SP1, which has been released today. This is another good reason to install SP1 on SQL Server 2012. If you are at PASS Summit 2012, come and join me, Alberto Ferrari and Chris Webb at our book signing event tomorrow, Thursday 8 2012, at the bookstore between 12:00pm and 12:30pm, or follow one of our sessions!

  Read the article

• Need WIF Training?

  - by Your DisplayName here!

  I spend numerous hours every month answering questions about WIF and identity in general. This made me realize that this is still quite a complicated topic once you go beyond the standard fedutil stuff. My good friend Brock and I put together a two day training course about WIF that covers everything we think is important. The course includes extensive lab material where you take standard application and apply all kinds of claims and federation techniques and technologies like WS-Federation, WS-Trust, session management, delegation, home realm discovery, multiple identity providers, Access Control Service, REST, SWT and OAuth. The lab also includes the latest version of the thinktecture identityserver and you will learn how to use and customize it. If you are looking for an open enrollment style of training, have a look here. Or contact me directly! The course outline looks as follows: Day 1 Intro to Claims-based Identity & the Windows Identity Foundation WIF introduces important concepts like conversion of security tokens and credentials to claims, claims transformation and claims-based authorization. In this module you will learn the basics of the WIF programming model and how WIF integrates into existing .NET code. Externalizing Authentication for Web Applications WIF includes support for the WS-Federation protocol. This protocol allows separating business and authentication logic into separate (distributed) applications. The authentication part is called identity provider or in more general terms - a security token service. This module looks at this scenario both from an application and identity provider point of view and walks you through the necessary concepts to centralize application login logic both using a standard product like Active Directory Federation Services as well as a custom token service using WIF’s API support. Externalizing Authentication for SOAP Services One big benefit of WIF is that it unifies the security programming model for ASP.NET and WCF. In the spirit of the preceding modules, we will have a look at how WIF integrates into the (SOAP) web service world. You will learn how to separate authentication into a separate service using the WS-Trust protocol and how WIF can simplify the WCF security model and extensibility API. Day 2 Advanced Topics:  Security Token Service Architecture, Delegation and Federation The preceding modules covered the 80/20 cases of WIF in combination with ASP.NET and WCF. In many scenarios this is just the tip of the iceberg. Especially when two business partners decide to federate, you usually have to deal with multiple token services and their implications in application design. Identity delegation is a feature that allows transporting the client identity over a chain of service invocations to make authorization decisions over multiple hops. In addition you will learn about the principal architecture of a STS, how to customize the one that comes with this training course, as well as how to build your own. Outsourcing Authentication:  Windows Azure & the Azure AppFabric Access Control Service Microsoft provides a multi-tenant security token service as part of the Azure platform cloud offering. This is an interesting product because it allows to outsource vital infrastructure services to a managed environment that guarantees uptime and scalability. Another advantage of the Access Control Service is, that it allows easy integration of both the “enterprise” protocols like WS-* as well as “web identities” like LiveID, Google or Facebook into your applications. ACS acts as a protocol bridge in this case where the application developer doesn’t need to implement all these protocols, but simply uses a service to make it happen. Claims & Federation for the Web and Mobile World Also the web & mobile world moves to a token and claims-based model. While the mechanics are almost identical, other protocols and token types are used to achieve better HTTP (REST) and JavaScript integration for in-browser applications and small footprint devices. Also patterns like how to allow third party applications to work with your data without having to disclose your credentials are important concepts in these application types. The nice thing about WIF and its powerful base APIs and abstractions is that it can shield application logic from these details while you can focus on implementing the actual application. HTH

  Read the article

• Hyperion EPM 11.1.2.3 Webcast Tutorials

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} These LIVE presentation Webcast Tutorials for Partners will be delivered in August 2013: Oracle Hyperion Planning on Exalytics In-Memory Machine - August 6, 2013 Oracle Hyperion Tax Provision - August 8, 2013 Oracle Planning and Budgeting Cloud Service - August 13, 2013 Go here for more details and to register for these. There are also new updated Webcast Tutorials for Oracle Partners in our EPM 11.1.2.3 Update Series: Oracle Hyperion Planning 11.1.2.3 (PS3) Oracle Hyperion Calculation Manager 11.1.2.2 Refresher and 11.1.2.3 (PS3) NEW Oracle Data Relationship Management 11.1.2.3 (PS3) NEW Oracle Hyperion Financial Data Quality Management 11.1.2.3 (PS3) NEW Oracle Hyperion Financial Close Suite 11.1.2.3 (PS3) NEW Oracle Hyperion Profitability & Cost Management 11.1.2.3 (PS3) Introducing Oracle Data Relationship Governance (DRG) Also note new content for Oracle BI Applications 11g with ODI: NEW Overview and Architecture of Oracle BI Applications 11.1.1.7.1 for ODI NEW Configuring Oracle BI Applications 11.1.1.7.1 for ODI These are all part of the compilation of Oracle BI/EPM online tutorials and webinars for Partners, where you can find many topics are covered. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• SQL SERVER – Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – T-SQL Example – Part 2 of 2

  - by pinaldave

  Yesterday I wrote a real world story of how a friend who thought they have an issue with intrusion or virus whereas the issue was really in the code. I strongly suggest you read my earlier blog post Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – Part 1 of 2 before continuing this blog post as this is second part of the first blog post. Let me reproduce the simple scenario in T-SQL. Building Sample Data USE [TestDB] GO -- Creating Table Products CREATE TABLE [dbo].[Products]( [ProductID] [int] NOT NULL, [ProductDesc] [varchar](50) NOT NULL, CONSTRAINT [PK_Products] PRIMARY KEY CLUSTERED ( [ProductID] ASC )) ON [PRIMARY] GO -- Creating Table ProductDetails CREATE TABLE [dbo].[ProductDetails]( [ProductDetailID] [int] NOT NULL, [ProductID] [int] NOT NULL, [Total] [int] NOT NULL, CONSTRAINT [PK_ProductDetails] PRIMARY KEY CLUSTERED ( [ProductDetailID] ASC )) ON [PRIMARY] GO ALTER TABLE [dbo].[ProductDetails] WITH CHECK ADD CONSTRAINT [FK_ProductDetails_Products] FOREIGN KEY([ProductID]) REFERENCES [dbo].[Products] ([ProductID]) ON UPDATE CASCADE ON DELETE CASCADE GO -- Insert Data into Table USE TestDB GO INSERT INTO Products (ProductID, ProductDesc) SELECT 1, 'Bike' UNION ALL SELECT 2, 'Car' UNION ALL SELECT 3, 'Books' GO INSERT INTO ProductDetails ([ProductDetailID],[ProductID],[Total]) SELECT 1, 1, 200 UNION ALL SELECT 2, 1, 100 UNION ALL SELECT 3, 1, 111 UNION ALL SELECT 4, 2, 200 UNION ALL SELECT 5, 3, 100 UNION ALL SELECT 6, 3, 100 UNION ALL SELECT 7, 3, 200 GO Select Data from Tables -- Selecting Data SELECT * FROM Products SELECT * FROM ProductDetails GO Delete Data from Products Table -- Deleting Data DELETE FROM Products WHERE ProductID = 1 GO Select Data from Tables Again -- Selecting Data SELECT * FROM Products SELECT * FROM ProductDetails GO Clean up Data -- Clean up DROP TABLE ProductDetails DROP TABLE Products GO My friend was confused as there was no delete was firing over ProductsDetails Table still there was a delete happening. The reason was because there is a foreign key created between Products and ProductsDetails Table with the keywords ON DELETE CASCADE. Due to ON DELETE CASCADE whenever is specified when the data from Table A is deleted and if it is referenced in another table using foreign key it will be deleted as well. Workaround 1: Design Changes – 3 Tables Change the design to have more than two tables. Create One Product Mater Table with all the products. It should historically store all the products list in it. No products should be ever removed from it. Add another table called Current Product and it should contain only the table which should be visible in the product catalogue. Another table should be called as ProductHistory table. There should be no use of CASCADE keyword among them. Workaround 2: Design Changes - Column IsVisible You can keep the same two tables. 1) Products and 2) ProductsDetails. Add a column with BIT datatype to it and name it as a IsVisible. Now change your application code to display the catalogue based on this column. There should be no need to delete anything. Workaround 3: Bad Advices (Bad advises begins here) The reason I have said bad advices because these are going to be bad advices for sure. You should make necessary design changes and not use poor workarounds which can damage the system and database integrity further. Here are the examples 1) Do not delete the data – well, this is not a real solution but can give time to implement design changes. 2) Do not have ON CASCADE DELETE – in this case, you will have entry in productsdetails which will have no corresponding product id and later on there will be lots of confusion. 3) Duplicate Data – you can have all the data of the product table move to the product details table and repeat them at each row. Now remove CASCADE code. This will let you delete the product table rows without any issue. There are so many things wrong this suggestion, that I will not even start here. (Bad advises ends here)  Well, did I miss anything? Please help me with your suggestions. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• A developer&rsquo;s WBS &ndash; 3 factors of 5

  - by johndoucette

  As a development manager, I have requested work breakdown structures (WBS) many times from the dev leads. Everyone has their own approach and why it takes sometimes days to get this simple list is often frustrating. Here is a simple way to get that elusive WBS done in 30 minutes and have 125 items in your list – well, 126. The WBS is made up of parent-child entities representing the overall outcome of the project. At the bottom of the hierarchical list should be the task item that a developer would perform in support of the branch in the list or WBS. Because I work with different dev leads on every project, I always ask the “what time value would you like to see at the lowest task in order to assign it to a developer and ensure it gets done within the timeframe”. I am particular to a task being 8 hours. Some like 8 to 24 hours. Stay away from tasks defaulting to 1 week. The task becomes way to vague and hard to manage completeness, especially on short budgets. As a developer, your focus is identifying the tasks you to accomplish in order to deliver the product. As a project manager, you will take the developer's WBS and add all the “other stuff” like quality testing, meetings, documentation, transition to maintenance, etc… Start your exercise with the name of the product you are delivering as a result of the project. You should be able to represent what you are building and deploying with one to three words. Example; XYZ Public Website Middleware BizTalk Application The reason you start with that single identifier is to always see the list as the product. It helps during each of the next three passes. Now, choose 5 tasks which in their entirety represent the product you will be delivering and add them to list under the product name you created earlier; Public Website     Security     Sites     Infrastructure     Publishing     Creative Continue this concept of seeing the list as the complete picture and decompose it one more level. You should have 25 items. Public Website     Security         Authentication         Login Control         Administration         DRM         Workflow     Sites         Masterpages         Page Layouts         Web Parts (RIA, Multimedia)         Content Types         Structures     Infrastructure         ...     Publishing         ...     Creative         ... And one more time for a total of 125 items. The top item makes the list 126. Public Website     Security         Authentication             Install (AD/ADAM/LDAP/SQL)             Configuration             Management             Web App Configuration             Implement Provider         Login Control             Login Form             Login/Logoff             pw change             pw recover/forgot             email verification         Administration             ...         DRM             ...         Workflow             ...     Sites         Masterpages         Page Layouts         Web Parts (RIA, Multimedia)         Content Types         Structures     Infrastructure         ...     Publishing         ...     Creative         ... The next step is to make sure the task at the bottom of every branch represents the “time value” you planned for the project. You can add more to the WBS and of course if you can’t find 5 items, 4 is fine. If a task can be done in a fraction of the time value you determined for the project, try to roll it up into a larger task. In the task actions (later when the iteration is being planned), decompose the details back to the simple tasks. Now, go estimate!

  Read the article

• Unable to Sign in to the Microsoft Online Services Signin application from Windows 7 client located behind ISA firewall

  - by Ravindra Pamidi

  A while ago i helped a customer troubleshoot authentication problem with Microsoft Online Services Signin application.  This customer was evaluating Microsoft BPOS (Business Productivity Online Services) and was having trouble using the single sign on application behind ISA 2004 firewall.The network structure is fairly simple with single Windows 2003 Active Directory domain and Windows 7 clients. On a successful logon to the Microsoft Online Services Signin application, this application provides single signon functionality to all of Microsoft online services in the BPOS package. Symptoms:When trying to signin it fails with error "The service is currently unavailable. Please try again later. If problems continue, contact your service administrator". If ISA 2004 firewall is removed from the picture the authentication succeeds.Troubleshooting: Enabled ISA Server firewall logging along with Microsoft Network Monitor tool on the Windows 7 Client while reproducing the issue. Analysis of the ISA Server Firewall logs and Microsoft Network capture revealed that the Microsoft Online Services Sign In application when sending request to ISA Server does not send the domain credentials and as a result ISA Server responds with an error code of HTTP 407 Proxy authentication required listing out the supported authentication mechanisms.  The application in question is expected to send the credentials of the domain user in response to this request. However in this case, it fails to send the logged on user's domain credentials. Bit of researching on the Internet revealed that The "Microsoft Online Services Sign In" application by default does not support Outbound Internet Proxy authentication. In order for it to send the logged on user's domain credentials we had to make  changes to its configuration file "SignIn.exe.config" located under "Program Files\Microsoft Online Services\Sign In" folder. Step by Step details to configure the configuration file are documented on Microsoft TechNet website given below.  Configure your outbound authenticating proxy serverhttp://www.microsoft.com/online/help/en-us/helphowto/cc54100d-d149-45a9-8e96-f248ecb1b596.htm After the above problem was addressed we were still not able to use the "Microsoft Online Services Sign In" application and it failed with the same error.  Analysis of another network capture revealed that the application in question is now sending the required credentials and the connection seems to terminate at a later stage. Enabled verbose logging for the "Microsoft Online Services Sign In" application and then reproduced the problem. Analysis of the logs revealed a time difference between the local client and Microsoft Online services server of around seven minutes which is above the acceptable time skew of five minutes. Excerpt from Microsoft Online Services Sign In application verbose log:  1/26/2012 1:57:51 PM Verbose SingleSignOn.GetSSOGenericInterface SSO Interface URL: https://signinservice.apac.microsoftonline.com/ssoservice/UID1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn The security timestamp is invalid because its creation time ('2012-01-26T08:34:52.767Z') is in the future. Current time is '2012-01-26T08:27:52.987Z' and allowed clock skew is '00:05:00'.1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn  Although the Windows 7 Clients successfully synchronized time to the domain controller for the domain, the domain controller was not configured to synchronize time with external NTP servers. This caused a gradual drift in time on the network thus resulting in the above issue. Reconfigured the domain controller holding the PDC FSMO role to synchronize time with external time source ( time.nist.gov ) and edited the system policy on the ISA server firewall to allow NTP traffic to time.nist.gov Configure the time source for the forest:Windows Time Servicehttp://technet.microsoft.com/en-us/library/cc794937(WS.10).aspx Forced synchronization of Windows time using the command w32tm /resync on the domain controller and later on the clients each of which had corrected the seven minutes difference. This resolved the problem with logon to Microsoft Online Services Sign In.

  Read the article

• An Actionable Common Approach to Federal Enterprise Architecture

  - by TedMcLaughlan

  The recent “Common Approach to Federal Enterprise Architecture” (US Executive Office of the President, May 2 2012) is extremely timely and well-organized guidance for the Federal IT investment and deployment community, as useful for Federal Departments and Agencies as it is for their stakeholders and integration partners. The guidance not only helps IT Program Planners and Managers, but also informs and prepares constituents who may be the beneficiaries or otherwise impacted by the investment. The FEA Common Approach extends from and builds on the rapidly-maturing Federal Enterprise Architecture Framework (FEAF) and its associated artifacts and standards, already included to a large degree in the annual Federal Portfolio and Investment Management processes – for example the OMB’s Exhibit 300 (i.e. Business Case justification for IT investments).A very interesting element of this Approach includes the very necessary guidance for actually using an Enterprise Architecture (EA) and/or its collateral – good guidance for any organization charged with maintaining a broad portfolio of IT investments. The associated FEA Reference Models (i.e. the BRM, DRM, TRM, etc.) are very helpful frameworks for organizing, understanding, communicating and standardizing across agencies with respect to vocabularies, architecture patterns and technology standards. Determining when, how and to what level of detail to include these reference models in the typically long-running Federal IT acquisition cycles wasn’t always clear, however, particularly during the first interactions of a Program’s technical and functional leadership with the Mission owners and investment planners. This typically occurs as an agency begins the process of describing its strategy and business case for allocation of new Federal funding, reacting to things like new legislation or policy, real or anticipated mission challenges, or straightforward ROI opportunities (for example the introduction of new technologies that deliver significant cost-savings).The early artifacts (i.e. Resource Allocation Plans, Acquisition Plans, Exhibit 300’s or other Business Case materials, etc.) of the intersection between Mission owners, IT and Program Managers are far easier to understand and discuss, when the overlay of an evolved, actionable Enterprise Architecture (such as the FEA) is applied.  “Actionable” is the key word – too many Public Service entity EA’s (including the FEA) have for too long been used simply as a very highly-abstracted standards reference, duly maintained and nominally-enforced by an Enterprise or System Architect’s office. Refreshing elements of this recent FEA Common Approach include one of the first Federally-documented acknowledgements of the “Solution Architect” (the “Problem-Solving” role). This role collaborates with the Enterprise, System and Business Architecture communities primarily on completing actual “EA Roadmap” documents. These are roadmaps grounded in real cost, technical and functional details that are fully aligned with both contextual expectations (for example the new “Digital Government Strategy” and its required roadmap deliverables - and the rapidly increasing complexities of today’s more portable and transparent IT solutions.  We also expect some very critical synergies to develop in early IT investment cycles between this new breed of “Federal Enterprise Solution Architect” and the first waves of the newly-formal “Federal IT Program Manager” roles operating under more standardized “critical competency” expectations (including EA), likely already to be seriously influencing the quality annual CPIC (Capital Planning and Investment Control) processes.  Our Oracle Enterprise Strategy Team (EST) and associated Oracle Enterprise Architecture (OEA) practices are already engaged in promoting and leveraging the visibility of Enterprise Architecture as a key contributor to early IT investment validation, and we look forward in particular to seeing the real, citizen-centric benefits of this FEA Common Approach in particular surface across the entire Public Service CPIC domain - Federal, State, Local, Tribal and otherwise. Read more Enterprise Architecture blog posts for additional EA insight!

  Read the article

• Feynman's inbox

  - by user12607414

  Here is Richard Feynman writing on the ease of criticizing theories, and the difficulty of forming them: The problem is not just to say something might be wrong, but to replace it by something — and that is not so easy. As soon as any really definite idea is substituted it becomes almost immediately apparent that it does not work. The second difficulty is that there is an infinite number of possibilities of these simple types. It is something like this. You are sitting working very hard, you have worked for a long time trying to open a safe. Then some Joe comes along who knows nothing about what you are doing, except that you are trying to open the safe. He says ‘Why don’t you try the combination 10:20:30?’ Because you are busy, you have tried a lot of things, maybe you have already tried 10:20:30. Maybe you know already that the middle number is 32 not 20. Maybe you know as a matter of fact that it is a five digit combination… So please do not send me any letters trying to tell me how the thing is going to work. I read them — I always read them to make sure that I have not already thought of what is suggested — but it takes too long to answer them, because they are usually in the class ‘try 10:20:30’. (“Seeking New Laws”, page 161 in The Character of Physical Law.) As a sometime designer (and longtime critic) of widely used computer systems, I have seen similar difficulties appear when anyone undertakes to publicly design a piece of software that may be used by many thousands of customers. (I have been on both sides of the fence, of course.) The design possibilities are endless, but the deep design problems are usually hidden beneath a mass of superfluous detail. The sheer numbers can be daunting. Even if only one customer out of a thousand feels a need to express a passionately held idea, it can take a long time to read all the mail. And it is a fact of life that many of those strong suggestions are only weakly supported by reason or evidence. Opinions are plentiful, but substantive research is time-consuming, and hence rare. A related phenomenon commonly seen with software is bike-shedding, where interlocutors focus on surface details like naming and syntax… or (come to think of it) like lock combinations. On the other hand, software is easier than quantum physics, and the population of people able to make substantial suggestions about software systems is several orders of magnitude bigger than Feynman’s circle of colleagues. My own work would be poorer without contributions — sometimes unsolicited, sometimes passionately urged on me — from the open source community. If a Nobel prize winner thought it was worthwhile to read his mail on the faint chance of learning a good idea, I am certainly not going to throw mine away. (In case anyone is still reading this, and is wondering what provoked a meditation on the quality of one’s inbox contents, I’ll simply point out that the volume has been very high, for many months, on the Lambda-Dev mailing list, where the next version of the Java language is being discussed. Bravo to those of my colleagues who are surfing that wave.) I started this note thinking there was an odd parallel between the life of the physicist and that of a software designer. On second thought, I’ll bet that is the story for anybody who works in public on something requiring special training. (And that would be pretty much anything worth doing.) In any case, Feynman saw it clearly and said it well.

  Read the article

• Efficiently separating Read/Compute/Write steps for concurrent processing of entities in Entity/Component systems

  - by TravisG

  Setup I have an entity-component architecture where Entities can have a set of attributes (which are pure data with no behavior) and there exist systems that run the entity logic which act on that data. Essentially, in somewhat pseudo-code: Entity { id; map<id_type, Attribute> attributes; } System { update(); vector<Entity> entities; } A system that just moves along all entities at a constant rate might be MovementSystem extends System { update() { for each entity in entities position = entity.attributes["position"]; position += vec3(1,1,1); } } Essentially, I'm trying to parallelise update() as efficiently as possible. This can be done by running entire systems in parallel, or by giving each update() of one system a couple of components so different threads can execute the update of the same system, but for a different subset of entities registered with that system. Problem In reality, these systems sometimes require that entities interact(/read/write data from/to) each other, sometimes within the same system (e.g. an AI system that reads state from other entities surrounding the current processed entity), but sometimes between different systems that depend on each other (i.e. a movement system that requires data from a system that processes user input). Now, when trying to parallelize the update phases of entity/component systems, the phases in which data (components/attributes) from Entities are read and used to compute something, and the phase where the modified data is written back to entities need to be separated in order to avoid data races. Otherwise the only way (not taking into account just "critical section"ing everything) to avoid them is to serialize parts of the update process that depend on other parts. This seems ugly. To me it would seem more elegant to be able to (ideally) have all processing running in parallel, where a system may read data from all entities as it wishes, but doesn't write modifications to that data back until some later point. The fact that this is even possible is based on the assumption that modification write-backs are usually very small in complexity, and don't require much performance, whereas computations are very expensive (relatively). So the overhead added by a delayed-write phase might be evened out by more efficient updating of entities (by having threads work more % of the time instead of waiting). A concrete example of this might be a system that updates physics. The system needs to both read and write a lot of data to and from entities. Optimally, there would be a system in place where all available threads update a subset of all entities registered with the physics system. In the case of the physics system this isn't trivially possible because of race conditions. So without a workaround, we would have to find other systems to run in parallel (which don't modify the same data as the physics system), other wise the remaining threads are waiting and wasting time. However, that has disadvantages Practically, the L3 cache is pretty much always better utilized when updating a large system with multiple threads, as opposed to multiple systems at once, which all act on different sets of data. Finding and assembling other systems to run in parallel can be extremely time consuming to design well enough to optimize performance. Sometimes, it might even not be possible at all because a system just depends on data that is touched by all other systems. Solution? In my thinking, a possible solution would be a system where reading/updating and writing of data is separated, so that in one expensive phase, systems only read data and compute what they need to compute, and then in a separate, performance-wise cheap, write phase, attributes of entities that needed to be modified are finally written back to the entities. The Question How might such a system be implemented to achieve optimal performance, as well as making programmer life easier? What are the implementation details of such a system and what might have to be changed in the existing EC-architecture to accommodate this solution?

  Read the article

• Fresh Ubuntu Install - Grub not loading

  - by Ryan Sharp

  System Ubuntu 12.04 64-bit Windows 7 SP1 Samsung 64GB SSD - OS' Samsung 1TB HDD - Games, /Home, Swap WD 300'ishGB HDD - Backup Okay, so I'm very frustrated, so please excuse me if I miss anything out as my head is clouded by anger and impatience, etc. I'll try me best, though. First of all, I'll explain how I got to my predicament. I finally got my new SSD. I firstly installed Windows, which completed without a hitch. Afterwards, I tried to install Ubuntu, which failed several times due to problems irrelevant to this question, but I mention this to explain my frustrations, sorry. Anyway, I finally installed Ubuntu. However, I chose the 'bootloader' to be installed on the same partition as where I was installing the Ubuntu Root partition, as that was what I believed to be the best choice. It was of my thinking that it was supposed to go on the same partition and on the SSD, which is my OS drive, though with my problem, it apparently was wrong. So I tried to fix it by checking guides and following their directions, but seemed to have messed it up even more. Here is what I receive after I use the fdisk -l command: (I also added explanations for which I used each partition for) Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 48959486 125044735 38042625 5 Extended /dev/sda5 48959488 125044735 38042624 83 Linux sda1 --/ Windows Recovery sda2 --/ Windows 7 sda3/5 --/ Ubuntu root [ / ] Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1939851263 457821184 83 Linux /dev/sdb6 1939853312 1953523711 6835200 82 Linux swap / Solaris sdb3 --/ Partition for Steam games, etc. sdb5 --/ Ubuntu Home [ /home ] sdb6 --/ Ubuntu Swap Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT sdc1 --/ Generic backup I also used a Boot Script that other users suggested, so that I can give more details on my partitions and also where Grub is located... ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. Now that is weird... Why would Grub2 be installed on both my SSD and HDD? Even weirder is why is Windows on the MBR of my backup hard drive? Nothing I did should have done that... Anyway, here is the entire Output from that script... PASTEBIN So, to summarize what I need: How can I fix my setup so grub loads on startup? How can I clean my partitions to remove unnecessary grubs? What did I do wrong so that I don't do something so daft again? Thank you so much for reading, and I hope you can help me. I've been trying to have a successful setup since Friday, and I'm almost at the point that I'm really tempted to throw my computer out the window due to my frustration.

  Read the article

• OPN Specialized Latest News (15th November)

  - by swalker

  HELPING YOU TO SPECIALIZE WebCenter Implementation Specialist Exam Preparation Webcasts: WebCenter Content And WebCenter Portal Oracle Partner Network would like to invite you to Refresh Courses for WebCenter Content and WebCenter Portal, to help partners to prepare for the WebCenter Implementation Specialist EXAMS. This is a 3 hours intensive refresher partner-only training session, providing attendees with an overview of WebCenter Content and WebCenter Portal functions and related topics. After the refresher part you will be able to take the relevant Implementation Specialist EXAM depending on your personal focus. NOTE: This is only suitable for experienced WebCenter Content or WebCenter Portal practitioners Who should attend? Partner Consultants who want to become an Oracle WebCenter Content or a WebCenter Portal Certified Implementation Specialist or both, that will help them to differentiate themselves in front of customers and support their Companies to become Specialized. Webcast Details: Click here to read more... Specialized Partners Only! New Service to Promote Your Events The Partner Event Publisher has just been made available to all specialized partners in EMEA.  Partners now have the opportunity to publish their events to the Oracle.com/events site and spread the word on their upcoming live in-person and/or live webcast events. Click here to read more information and watch a short video demo. VADs Get Specialized Effective November 1, 2011 , VADs, with a valid Value Added Distributor Agreement will no longer be required to meet customer reference requirements outlined in the business criteria section in order to become specialized. VADs must continue meet all other business and competency criteria set forth in the applicable Knowledge Zone prior to specialization approval. New Certification Pillar Axiom 600 Storage System Your opportunity to take the Pillar Axiom 600 Storage System Essentials (1Z0-581) Exam is vailable now in beta. Pass the exam so you can become a Pillar Axiom 600 Storage Systems Implementation Specialist! Free vouchers are available for Oracle Partners! If you would like to receive a free Beta exam voucher, please send your request to [email protected] and include your name, business email address, company, and the Exam name Pillar Axiom 600 Storage System Essentials Beta exam. New Certification Available: Oracle Utilities Customer Care and Billing Oracle Utilities Customer Care and Billing 2 Essentials (1Z0-562) is a solution designed to help you meet market windows and regulatory deadlines while enjoying a low total cost of ownership and a high return on investment. Take the exam now to become an  Oracle Utilities Customer Care and Billing 2 Essentials Implementation Specialists. MEASURING YOUR SUCCESS We had 1674 Specialized Partners covering 5364 Specializations. Please note that due to OPN contract renewals at any given point in time there are valid Specialized Partners and Specializations which are temporarily not captured in the total statistics. An incremental 1961 individuals were accredited as Implementation Specialists giving an EMEA cumulative total of 9598 Implementation Specialists 26 ISVs obtained one or more Ready's, for a total of 53 Ready's Don't forget! You can submit your own press releases to Oracle! Every time you achieve specialization we'd like to support you getting the message out! Press guidelines and a submission link can be found on the OPN Portal here.

  Read the article

• Error X3650 when compiling shader in XNA

  - by Saikai

  I'm attempting to convert the XBDEV.NET Mosaic Shader for use in my XNA project and having trouble. The compiler errors out because of the half globals. At first I tried replacing the globals and just writing the variables explicitly in the code, but that garbles the Output. Next I tried replacing all the half with float vars, but that still garbles the resulting Image. I call the effect file from SpriteBatch.Begin(). Is there a way to convert this shader to the new pixel shader conventions? Are there any good tutorials for this topic? Here is the shader file for reference: /*****************************************************************************/ /* File: tiles.fx Details: Modified version of the NVIDIA Composer FX Demo Program 2004 Produces a tiled mosaic effect on the output. Requires: Vertex Shader 1.1 Pixel Shader 2.0 Modified by: [email protected] (www.xbdev.net) */ /*****************************************************************************/ float4 ClearColor : DIFFUSE = { 0.0f, 0.0f, 0.0f, 1.0f}; float ClearDepth = 1.0f; /******************************** TWEAKABLES *********************************/ half NumTiles = 40.0; half Threshhold = 0.15; half3 EdgeColor = {0.7f, 0.7f, 0.7f}; /*****************************************************************************/ texture SceneMap : RENDERCOLORTARGET < float2 ViewportRatio = { 1.0f, 1.0f }; int MIPLEVELS = 1; string format = "X8R8G8B8"; string UIWidget = "None"; >; sampler SceneSampler = sampler_state { texture = <SceneMap>; AddressU = CLAMP; AddressV = CLAMP; MIPFILTER = NONE; MINFILTER = LINEAR; MAGFILTER = LINEAR; }; /***************************** DATA STRUCTS **********************************/ struct vertexInput { half3 Position : POSITION; half3 TexCoord : TEXCOORD0; }; /* data passed from vertex shader to pixel shader */ struct vertexOutput { half4 HPosition : POSITION; half2 UV : TEXCOORD0; }; /******************************* Vertex shader *******************************/ vertexOutput VS_Quad( vertexInput IN) { vertexOutput OUT = (vertexOutput)0; OUT.HPosition = half4(IN.Position, 1); OUT.UV = IN.TexCoord.xy; return OUT; } /********************************** pixel shader *****************************/ half4 tilesPS(vertexOutput IN) : COLOR { half size = 1.0/NumTiles; half2 Pbase = IN.UV - fmod(IN.UV,size.xx); half2 PCenter = Pbase + (size/2.0).xx; half2 st = (IN.UV - Pbase)/size; half4 c1 = (half4)0; half4 c2 = (half4)0; half4 invOff = half4((1-EdgeColor),1); if (st.x > st.y) { c1 = invOff; } half threshholdB = 1.0 - Threshhold; if (st.x > threshholdB) { c2 = c1; } if (st.y > threshholdB) { c2 = c1; } half4 cBottom = c2; c1 = (half4)0; c2 = (half4)0; if (st.x > st.y) { c1 = invOff; } if (st.x < Threshhold) { c2 = c1; } if (st.y < Threshhold) { c2 = c1; } half4 cTop = c2; half4 tileColor = tex2D(SceneSampler,PCenter); half4 result = tileColor + cTop - cBottom; return result; } /*****************************************************************************/ technique tiles { pass p0 { VertexShader = compile vs_1_1 VS_Quad(); ZEnable = false; ZWriteEnable = false; CullMode = None; PixelShader = compile ps_2_0 tilesPS(); } }

  Read the article

• XNA Multiplayer Games and Networking

  - by JoshReuben

  ·        XNA communication must by default be lightweight – if you are syncing game state between players from the Game.Update method, you must minimize traffic. That game loop may be firing 60 times a second and player 5 needs to know if his tank has collided with any player 3 and the angle of that gun turret. There are no WCF ServiceContract / DataContract niceties here, but at the same time the XNA networking stack simplifies the details. The payload must be simplistic - just an ordered set of numbers that you would map to meaningful enum values upon deserialization.   Overview ·        XNA allows you to create and join multiplayer game sessions, to manage game state across clients, and to interact with the friends list ·        Dependency on Gamer Services - to receive notifications such as sign-in status changes and game invitations ·        two types of online multiplayer games: system link game sessions (LAN) and LIVE sessions (WAN). ·        Minimum dev requirements: 1 Xbox 360 console + Creators Club membership to test network code - run 1 instance of game on Xbox 360, and 1 on a Windows-based computer   Network Sessions ·        A network session is made up of players in a game + up to 8 arbitrary integer properties describing the session ·        create custom enums – (e.g. GameMode, SkillLevel) as keys in NetworkSessionProperties collection ·        Player state: lobby, in-play   Session Types ·        local session - for split-screen gaming - requires no network traffic. ·        system link session - connects multiple gaming machines over a local subnet. ·        Xbox LIVE multiplayer session - occurs on the Internet. Ranked or unranked   Session Updates ·        NetworkSession class Update method - must be called once per frame. ·        performs the following actions: o   Sends the network packets. o   Changes the session state. o   Raises the managed events for any significant state changes. o   Returns the incoming packet data. ·        synchronize the session à packet-received and state-change events à no threading issues   Session Config ·        Session host - gaming machine that creates the session. XNA handles host migration ·        NetworkSession properties: AllowJoinInProgress , AllowHostMigration ·        NetworkSession groups: AllGamers, LocalGamers, RemoteGamers   Subscribe to NetworkSession events ·        GamerJoined ·        GamerLeft ·        GameStarted ·        GameEnded – use to return to lobby ·        SessionEnded – use to return to title screen   Create a Session session = NetworkSession.Create(         NetworkSessionType.SystemLink,         maximumLocalPlayers,         maximumGamers,         privateGamerSlots,         sessionProperties );   Start a Session if (session.IsHost) {     if (session.IsEveryoneReady)     {        session.StartGame();        foreach (var gamer in SignedInGamer.SignedInGamers)        {             gamer.Presence.PresenceMode =                 GamerPresenceMode.InCombat;   Find a Network Session AvailableNetworkSessionCollection availableSessions = NetworkSession.Find(     NetworkSessionType.SystemLink,       maximumLocalPlayers,     networkSessionProperties); availableSessions.AllowJoinInProgress = true;   Join a Network Session NetworkSession session = NetworkSession.Join(     availableSessions[selectedSessionIndex]);   Sending Network Data var packetWriter = new PacketWriter(); foreach (LocalNetworkGamer gamer in session.LocalGamers) {     // Get the tank associated with this player.     Tank myTank = gamer.Tag as Tank;     // Write the data.     packetWriter.Write(myTank.Position);     packetWriter.Write(myTank.TankRotation);     packetWriter.Write(myTank.TurretRotation);     packetWriter.Write(myTank.IsFiring);     packetWriter.Write(myTank.Health);       // Send it to everyone.     gamer.SendData(packetWriter, SendDataOptions.None);     }   Receiving Network Data foreach (LocalNetworkGamer gamer in session.LocalGamers) {     // Keep reading while packets are available.     while (gamer.IsDataAvailable)     {         NetworkGamer sender;          // Read a single packet.         gamer.ReceiveData(packetReader, out sender);          if (!sender.IsLocal)         {             // Get the tank associated with this packet.             Tank remoteTank = sender.Tag as Tank;              // Read the data and apply it to the tank.             remoteTank.Position = packetReader.ReadVector2();             …   End a Session if (session.AllGamers.Count == 1)         {             session.EndGame();             session.Update();         }   Performance •        Aim to minimize payload, reliable in order messages •        Send Data Options: o   Unreliable, out of order -(SendDataOptions.None) o   Unreliable, in order (SendDataOptions.InOrder) o   Reliable, out of order (SendDataOptions.Reliable) o   Reliable, in order (SendDataOptions.ReliableInOrder) o   Chat data (SendDataOptions.Chat) •        Simulate: NetworkSession.SimulatedLatency , NetworkSession.SimulatedPacketLoss •        Voice support – NetworkGamer properties: HasVoice ,IsTalking , IsMutedByLocalUser

  Read the article

• Construction Paper, Legos, and Architectural Modeling

  I can remember as a kid playing with construction paper and Legos to explore my imagination. Through my exploration I was able to build airplanes, footballs, guns, and more, out of paper. Additionally I could create entire cities, robots, or anything else I could image out of Legos.  These toys, I now realize were in fact tools that gave me an opportunity to explore my ideas in the physical world through the use of modeling.  My imagination was allowed to run wild as I, unknowingly at the time, made design decisions that directly affected the models I was building from the raw materials.  To prove my point further, I can remember building a paper airplane that seemed to go nowhere when I tried to throw it. So I decided to attach a paper clip to the plane before I decided to throw it the next time to test my concept that by adding more weight to the plane that it would fly better and for longer distances. The paper airplane allowed me to model my design decision through the use of creating an artifact in that I created a paper airplane that was carrying extra weight through the incorporation of the paper clip in to the design. Also, I remember using Legos to build all sorts of creations, and these creations became artifacts of my imagination. As I further and further defined my Lego creations through the process of playing I was able to create elaborate artifacts of my imagination. These artifacts represented design decision I had made in the evolution of my creation through my child like design process. In some form or fashion the artifacts I created as a kid are very similar to the artifacts that I create when I model a software architectural concept or a software design in that the process of making decisions is directly translated in to a tangible model in the form of an architectural model. Architectural models have been defined as artifacts that depict design decisions of a system’s architecture.  The act of creating architectural models is the act of architectural modeling. Furthermore, architectural modeling is the process of creating a physical model based architectural concepts and documenting these design decisions. In the process of creating models, the standard notation used is Architectural modeling notation. This notation is the primary method of capturing the essence of design decisions regarding architecture.  Modeling notations can vary based on the need and intent of a project; typically they range from natural language to a diagram based notation. Currently, Unified Markup Language (UML) is the industry standard in terms of architectural modeling notation  because allows for architectures to be defined through a series of boxes, lines, arrows and other basic symbols that encapsulate design designs in to virtual components, connectors, configurations and interfaces.  Furthermore UML allows for additional break down of models through the use of natural language as to explain each section of the model in plain English. One of the major factors in architectural modeling is to define what is to be modeled. As a basic rule of thumb, I tend to model architecture based on the complexity of systems or sub sub-systems of architecture. Another key factor is the level of detail that is actually needed for a model. For example if I am modeling a system for a CEO to view then the low level details will be omitted. In comparison, if I was modeling a system for another engineer to actually implement I would include as much detailed information as I could to help the engineer implement my design.

  Read the article

• Replicating between Cloud and On-Premises using Oracle GoldenGate

  - by Ananth R. Tiru

  Do you have applications running on the cloud that you need to connect with the on premises systems. The most likely answer to this question is an astounding YES!  If so, then you understand the importance of keep the data fresh at all times across the cloud and on-premises environments. This is also one of the key focus areas for the new GoldenGate 12c release which we announced couple of week ago via a press release. Most enterprises have spent years avoiding the data “silos” that inhibit productivity. For example, an enterprise which has adopted a CRM strategy could be relying on an on-premises based marketing application used for developing and nurturing leads. At the same time it could be using a SaaS based Sales application to create opportunities and quotes. The sales and the marketing teams which use these systems need to be able to access and share the data in a reliable and cohesive way. This example can be extended to other applications areas such as HR, Supply Chain, and Finance and the demands the users place on getting a consistent view of the data. When it comes to moving data in hybrid environments some of the key requirements include minimal latency, reliability and security: Data must remain fresh. As data ages it becomes less relevant and less valuable—day-old data is often insufficient in today’s competitive landscape. Reliability must be guaranteed despite system or connectivity issues that can occur between the cloud and on-premises instances. Security is a key concern when replicating between cloud and on-premises instances. There are several options to consider when replicating between the cloud and on-premises instances. Option 1 – Secured network established between the cloud and on-premises A secured network is established between the cloud and on-premises which enables the applications (including replication software) running on the cloud and on-premises to have seamless connectivity to other applications irrespective of where they are physically located. Option 2 – Restricted network established between the cloud and on-premises A restricted network is established between the cloud and on-premises instances which enable certain ports (required by replication) be opened on both the cloud and on the on-premises instances and white lists the IP addresses of the cloud and on-premises instances. Option 3 – Restricted network access from on-premises and cloud through HTTP proxy This option can be considered when the ports required by the applications (including replication software) are not open and the cloud instance is not white listed on the on-premises instance. This option of tunneling through HTTP proxy may be only considered when proper security exceptions are obtained. Oracle GoldenGate Oracle GoldenGate is used for major Fortune 500 companies and other industry leaders worldwide to support mission-critical systems for data availability and integration. Oracle GoldenGate addresses the requirements for ensuring data consistency between cloud and on-premises instances, thus facilitating the business process to run effectively and reliably. The architecture diagram below illustrates the scenario where the cloud and the on-premises instance are connected using GoldenGate through a secured network In the above scenario, Oracle GoldenGate is installed and configured on both the cloud and the on-premises instances. On the cloud instance Oracle GoldenGate is installed and configured on the machine where the database instance can be accessed. Oracle GoldenGate can be configured for unidirectional or bi-directional replication between the cloud and on premises instances. The specific configuration details of Oracle GoldenGate processes will depend upon the option selected for establishing connectivity between the cloud and on-premises instances. The knowledge article (ID - 1588484.1) titled ' Replicating between Cloud and On-Premises using Oracle GoldenGate' discusses in detail the options for replicating between the cloud and on-premises instances. The article can be found on My Oracle Support. To learn more about Oracle GoldenGate 12c register for our launch webcast where we will go into these new features in more detail.   You may also want to download our white paper "Oracle GoldenGate 12c Release 1 New Features Overview" I would love to hear your requirements for replicating between on-premises and cloud instances, as well as your comments about the strategy discussed in the knowledge article to address your needs. Please post your comments in this blog or in the Oracle GoldenGate public forum - https://forums.oracle.com/community/developer/english/business_intelligence/system_management_and_integration/goldengate

  Read the article

• MPI Cluster Debugger launch integration in VS2010

  Let's assume that you have all the HPC bits installed and that you have existing MPI code (or you created a "Hello World" project using the MPI project template). Of course, you create a single MPI application and at runtime it will correspond to multiple processes (of the same app) launched on multiple nodes (i.e. machines) on the cluster. So how do you debug such a situation by simply hitting the familiar "F5" keystroke (i.e. Debug - Start Debugging)?WATCH IT INSTEAD OF READING ABOUT ITIf you can't bear to read through all the details below, just watch this 19-minute screencast explaining this VS2010 feature. Alternatively, or even additionally, keep on reading.REQUIREMENTWhen you debug an MPI application, you would want the copying of resources from your client machine (where Visual Studio is installed) to each compute node (where Windows HPC Server is installed) to take place automatically for you. 'Resources' in the previous sentence includes your application binary, plus any binary or data dependencies it may have, plus PDBs if needed, plus the debug CRT of the correct bitness, plus msvsmon for remote debugging to work. You would also want, after copying is complete, to have your app and msvsmon launched and attached so that you can hit breakpoints back in Visual Studio on your client machine. All these thing that you would want are delivered in VS2010.STEPS TO F51. In your MPI project where you have placed a breakpoint go to Project Properties - Configuration Properties - Debugging. Ensure the "Debugger to launch" combo box value is set to MPI Cluster Debugger.2. There are a whole bunch of properties here and typically you can ignore all of them except one: Run Environment. By default it is set to run 1 process on your local machine and if you change the number after that to, for example, 4 it will launch 4 processes of your app on your local machine.You want this to run on your cluster though, so go to the dropdown arrow at the end of the Run Environment cell and open it to expose the "Edit Hpc node" menu which opens the Node Selector dialog:In this dialog you can enter (or pick from a list) the cluster head node name and then the number of processes you want to execute on the cluster and then hit OK and… you are done.3. Press F5 and watch your breakpoint get hit (after giving it some time for copying, remote execution, attachment and symbol resolution to take place).GOING DEEPERIn the MPI Cluster Debugger project properties above, you can see many additional properties to the Run Environment. They are all optional, but you may want to understand them in order to fine tune your cluster debugging. Read all about each one of these on the MSDN page Configuration Properties for the MPI Cluster Debugger.In the Node Selector dialog above you can see more options than just the Head Node name and Number of Process to run. They should be self-explanatory but I also cover them in depth in my screencast showing you an example of why you would choose to schedule processes per core versus per node. You can also read about these options on MSDN as part of the page How to: Configure and Launch the MPI Cluster Debugger.To read through an example that touches on MPI project creation, project properties, node selector, and also usage of MPI with OpenMP plus MPI with PPL, read the MSDN page Walkthrough: Launching the MPI Cluster Debugger in Visual Studio 2010.Happy MPI debugging! Comments about this post welcome at the original blog.

  Read the article

• SharePoint For Newbie Developers: Code Scope

  - by Mark Rackley

  So, I continue to try to come up with diagrams and information to help new SharePoint developers wrap their heads around this SharePoint beast, especially when those newer to development are on my team. To that end, I drew up the below diagram to help some of our junior devs understand where/when code is being executed in SharePoint at a high level. Note that I say “High Level”… This is a simplistic diagram that can get a LOT more complicated if you want to dive in deeper.  For the purposes of my lesson it served its purpose well. So, please no comments from you peanut gallery about information 3 levels down that’s missing unless it adds to the discussion.  Thanks So, the diagram below details where code is executed on a page load and gives the basic flow of the page load. There are actually many more steps, but again, we are staying high level here. I just know someone is still going to say something like “Well.. actually… the dlls are getting executed when…”  Anyway, here’s the diagram with some information I like to point out: Code Scope / Where it is executed So, looking at the diagram we see that dlls and XSL are executed on the server and that JavaScript/jQuery are executed on the client. This is the main thing I like to point out for the following reasons: XSL (for the most part) is faster than JavaScript I actually get this question a lot. Since XSL is executed on the server less data is getting passed over the wire and a beefier machine (hopefully) is doing the processing. The outcome of course is better performance. When You are using jQuery and making Web Service calls you are building XML strings and sending them to the server, then ALL the results come back and the client machine has to parse through the XML and use what it needs and ignore the rest (and there is a lot of garbage that comes back from SharePoint Web Service calls). XSL and JavaScript cannot work together in the same scope Let me clarify. JavaScript can send data back to SharePoint in postbacks that XSL can then use. XSL can output JavaScript and initiate JavaScript variables.  However, XSL cannot call a JavaScript method to get a value and JavaScript cannot directly interact with XSL and call its templates. They are executed in there scope only. No crossing of boundaries here. So, what does this all mean? Well, nothing too deep. This is just some basic fundamental information that all SharePoint devs need to understand. It will help you determine what is the best solution for your specific development situation and it will help the new guys understand why they get an error when trying to call a JavaScript Function from within XSL.  Let me know if you think quick little blogs like this are helpful or just add to the noise. I could probably put together several more that are similar.  As always, thanks for stopping by, hope you learned something new.

  Read the article

• How should I plan the inheritance structure for my game?

  - by Eric Thoma

  I am trying to write a platform shooter in C++ with a really good class structure for robustness. The game itself is secondary; it is the learning process of writing it that is primary. I am implementing an inheritance tree for all of the objects in my game, but I find myself unsure on some decisions. One specific issue that it bugging me is this: I have an Actor that is simply defined as anything in the game world. Under Actor is Character. Both of these classes are abstract. Under Character is the Philosopher, who is the main character that the user commands. Also under Character is NPC, which uses an AI module with stock routines for friendly, enemy and (maybe) neutral alignments. So under NPC I want to have three subclasses: FriendlyNPC, EnemyNPC and NeutralNPC. These classes are not abstract, and will often be subclassed in order to make different types of NPC's, like Engineer, Scientist and the most evil Programmer. Still, if I want to implement a generic NPC named Kevin, it would nice to be able to put him in without making a new class for him. I could just instantiate a FriendlyNPC and pass some values for the AI machine and for the dialogue; that would be ideal. But what if Kevin is the one benevolent Programmer in the whole world? Now we must make a class for him (but what should it be called?). Now we have a character that should inherit from Programmer (as Kevin has all the same abilities but just uses the friendly AI functions) but also should inherit from FriendlyNPC. Programmer and FriendlyNPC branched away from each other on the inheritance tree, so inheriting from both of them would have conflicts, because some of the same functions have been implemented in different ways on the two of them. 1) Is there a better way to order these classes to avoid these conflicts? Having three subclasses; Friendly, Enemy and Neutral; from each type of NPC; Engineer, Scientist, and Programmer; would amount to a huge number of classes. I would share specific implementation details, but I am writing the game slowly, piece by piece, and so I haven't implemented past Character yet. 2) Is there a place where I can learn these programming paradigms? I am already trying to take advantage of some good design patterns, like MVC architecture and Mediator objects. The whole point of this project is to write something in good style. It is difficult to tell what should become a subclass and what should become a state (i.e. Friendly boolean v. Friendly class). Having many states slows down code with if statements and makes classes long and unwieldy. On the other hand, having a class for everything isn't practical. 3) Are there good rules of thumb or resources to learn more about this? 4) Finally, where does templating come in to this? How should I coordinate templates into my class structure? I have never actually taken advantage of templating honestly, but I hear that it increases modularity, which means good code.

  Read the article

• New Oracle BI Mobile Demonstration and SampleApp V305 on OTN

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 There is a new version of the Oracle BI Mobile HD app for iPhones and iPad. So download / update your App now. Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Then we have also changed the public server for hosting the Oracle BI Mobile Demonstration. This server image is based on the standard OBIEE 11.1.1.7 Sample Application (V305) which you can also download as a VirtualBox Image (this is a turnkey virtual environment with full SampleAppV305 preconfigured) from OTN here.   When your App is on your iPad, go into the “Settings” and “Add Server” to fill in the host location and access details as shown below: · Host = slc02ojq.oracle.com · Port = 7780 · Username = Prodney · Password = Admin123 · Note: SSL and SSO = OFF This same SampleApp V305 Demonstration server can also be accessed from your PC browser @ http://slc02ojq.oracle.com:7780/analytics. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• What Color is your Jetpack ?

  - by JoshReuben

  I’m a programmer, Im approaching 40, and I’m fairly decent at my job – I’ll keep doing what I’m doing for as long as they let me!   So what are your career options if you know how to code? A Programmer could be ..   An Algorithm developer Pros Interesting High barriers of entry, potential for startup competitive factor Cons Do you have the skill, qualifications? What are working conditions n this mystery niche ? micro-focus An Academic Pros Low pressure Job security – or is this an illusion ? Cons Low Pay Need a PhD A Software Architect Pros: strategic, rather than tactical Setting technology platform and high level vision You say how it should work, others have to figure out why its not working the way its supposed to ! broad view – you are paid to learn (how do you con people into paying for you to learn ??) Cons: Glorified developer – more often than not! competitive – everyone wants to do it ! loose touch with underlying tech in tough times, first guy to get the axe ! A Software Engineer Pros: interesting, always more to learn fun I can do it Fallback Cons: Nothing new under the sun – been there, done that Dealing with poor requirements, deadlines, other peoples code, overtime C#, XAML, Web - Low barriers of entry –> à race to the bottom A Team leader Pros: Setting code standards and proposing technology choices Cons: Glorified developer – more often than not! Inspecting other peoples code and debugging the problems they cannot fix Dealing with mugbies and prima donas Responsible for QA of others A Project Manager Pros No need for debugging other peoples code Cons Low barrier of entry High pressure Responsible for QA of others Loosing touch with technology A lot of bullshit meetings Have to be an asshole A Product Manager Pros No need for debugging other peoples code Learning new skillset of sales and marketing Cons Travel (I'm a family man) May need to know the bs details of an uninteresting product things I want to work with: AI, algorithms, Numerical Computing, Mathematica, C++ AMP – unfortunately, the work here is few & far between. VS & TFS Extensibility, DSLs (Workflow , Lightswitch), Code Generation – one day, code will write code ! Unity3D, WebGL – fun, fun, fun ! Modern Web – Knockout, SignalR, MVC, Node.Js ??? (tentative – I'll wait until things stabilize as this area is undergoing a pre-Cambrian explosion) Things I don’t want to work with: (but will if I'm asked to !) C# – same old, same old – not learning anything new here Old code – blech ! Environment with code & fix mentality , ad hoc requirements, excessive overtime Pc support, System administration – even after 20 years, people still ask you to do this sometimes ! debugging – my skills are just not there yet Oracle Old tech: VB 6, XSLT, WinForms, Net 3.51 or less Old style Web dev Information Systems: ASP.NET webforms, Reporting services / crystal reports, SQL Server CRUD with manual data layer, XAML MVVM – variations of the same concept, ad nauseaum. Low barriers of entry –> race to the bottom.  Metro – an elegant API coupled to a horrendous UX – I'll wait for market penetration viability before investing further in this.   Conclusion So if you are in a slump, take heart: Programming is a great career choice compared to every other job !

  Read the article

• Working Towards Specialization? Your VAD Can Help You Score!

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} TOUCH DOWN! That’s right folks, football is in full swing and what better way to kickoff football season than with a great Oracle play? Partners can now score big by side passing the ball to their VADs, enabling them to help in the process of becoming a Specialized partner. With the new functionality now available on the OPN Competency Center, Partner PRM Administrators can grant access to their VADs and have them assist in achieving their Specialization requirements. Here are the rules of the game: Partner Administrator must provide authorization Details do not include individual users data Access can be removed anytime Follow the steps below to grant your VAD access to your company Specialization progress reports. It’s as simple as 1,2,3…Go team go! Login to the OPN Competency Center and go to “My Preferences” on the top right corner of the screen. Under “My VAD”, select your Region, Country and Value Added Distributor name, then simple click in “ADD VAD”. Your VAD can now access your Specialization Tracker report! For those MVP’s who want to learn more, be sure to watch this 3 minute play by play video on the new OPN Competency Center VAD/VAR Specialization Tracker below, and click here before game day! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Are You Ready For Some Oracle Football? The OPN Communications Team Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• broken upgrade from 10.04 to 12.04 on a VPS - recoverable?

  - by HorusKol

  I have a VPS hosted 1500 km away. It originally came with 9.10 - and this morning I decided that I really should get to an LTS release, and figured I'd jump to 12.04. Researching, I discovered that there is no direct path between 9.10 and 12.04, but that I could upgrade via 10.04. After backing up my data, I dove in. The upgrade to 10.04 was successful, and I proceeded to upgrade to 12.04. Things started to go wrong. First, I got an error with GLIBC - I retried and got the same error. That's when I stopped the upgrade. I then tried another round of apt-get update && apt-get upgrade and got a list of "unmet dependencies": apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed I tried to see if I could do something about these - using apt-get -f install. This told me that I would need to upgrade my kernel. I found instructions on how to do this, but when I ran apt-get to install the new linux headers, I got the same dependency errors. I found another answer here where someone else had had an interruption in their upgrade - and tried the solution that worked for them: sudo apt-get -f dist-upgrade This resulted in the error: E: Could not perform immediate configuration on 'python2.7-minimal'.Please see man 5 apt.conf under APT::Immediate-Configure for details. (2) I tried to resolve this by: apt-get install -o APT::Immediate-Configure=false -f apt python-minimal But this simply ended up with this last list of dependency errors: apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed python: Depends: python-minimal (= 2.6.5-0ubuntu1) but 2.7.3-0ubuntu2 is to be installed python-apt: Depends: libapt-pkg-libc6.10-6-4.8 python-minimal: Depends: python2.7-minimal (>= 2.7.3) but it is not going to be installed Breaks: python-support (< 1.0.10ubuntu2) but 1.0.4ubuntu1 is to be installed synaptic: Depends: libapt-pkg-libc6.10-6-4.8 Any ideas on how to dig out of this hole?

  Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >