Search Results

Search found 62736 results on 2510 pages for 'smart help'.

Page 333/2510 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

  • How do I get a Broadcom BCM4311 working?

    - by Fer1805
    I'm having serious problems installing the broadcom drivers for ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. Broadcom BCM4311 Wireless not working Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

    Read the article

  • SQLAuthority News – Download Whitepaper – Choosing a Tabular or Multidimensional Modeling Experience in SQL Server 2012 Analysis Services

    - by pinaldave
    Data modeling is the most important task for any BI professional. Matter of the fact, the biggest challenge is to organizing disparate data into an analytic model that effectively and efficiently supports the reporting and analysis. SQL Server 2012 introduces BI Semantic Model (BISM), a single model that can support a broad range of reporting and analysis while blending two Analysis Services modeling experiences behind the scenes. Multidimensional modeling – enables BI professionals to create sophisticated multidimensional cubes using traditional online analytical processing (OLAP). Tabular modeling – provides self-service data modeling capabilities to business and data analysts. As data modeling is evolving and business needs are growing new technologies and tools are emerging to help end users to make the necessary adjustment to the reporting and analysis needs. This white paper is will provide practical guidance to help you decide which SQL Server 2012 Analysis Services modeling experience – tabular or multidimensional. Do let me know what do is your opinion as a comment. In simple word – I would like to know when will you use Tabular modeling and when Multidimensional modeling? Download Choosing a Tabular or Multidimensional Modeling Experience in SQL Server 2012 Analysis Services Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Business Intelligence, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL White Papers, T SQL, Technology

    Read the article

  • Grid-Based 2D Lighting Problems

    - by Lemoncreme
    I am aware this question has been asked before, but unfortunately I am new to the language, so the complicated explanations I've found do not help me in the least. I need a lighting engine for my game, and I've tried some procedural lighting systems. This method works the best: if (light[xx - 1, yy] > light[xx, yy]) light[xx, yy] = light[xx - 1, yy] - lightPass; if (light[xx, yy - 1] > light[xx, yy]) light[xx, yy] = light[xx, yy - 1] - lightPass; if (light[xx + 1, yy] > light[xx, yy]) light[xx, yy] = light[xx + 1, yy] - lightPass; if (light[xx, yy + 1] > light[xx, yy]) light[xx, yy] = light[xx, yy + 1] - lightPass; (Subtracts adjacent values by 'lightPass' variable if they are more bright) (It's in a for() loop) This is all fine and dandy except for a an obvious reason: The system favors whatever comes first in the for() loop This is what the above code looks like applied to my game: If I could get some help on creating a new procedural or otherwise lighting system I would really appreciate it!

    Read the article

  • With which class to start Test Driven Development of card game application? And what would be the next 5 to 7 tests?

    - by Maxis
    I have started to write card game applications. Some model classes: CardSuit, CardValue, Card Deck, IDeckCreator, RegularDeckCreator, DoubleDeckCreator Board Hand and some game classes: Turn, TurnHandler IPlayer, ComputerPlayer, HumanPlayer IAttackStrategy, SimpleAttachStrategy, IDefenceStrategy, SimpleDefenceStrategy GameData, Game are already written. My idea is to create engine, where two computer players could play game and then later I could add UI part. Already for some time I'm reading about Test Driven Development (TDD) and I have idea to start writing application from scratch, as currently I have tendency to write not needed code, which seems usable in future. Also code doesn't have any tests and it is hard to add them now. Seems that TDD could improve all these issue - minimum of needed code, good test coverage and also could help to come to right application design. But I have one issue - I can't decide from where to start TDD? Should I start from bottom - Card related classes or somewhere on top - Game, TurnHandler, ... ? With which class you would start? And what would be the next 5 to 7 tests? (use the card game you know the best) I would like to start TDD with your help and then continue on my own!

    Read the article

  • Ubuntu 12.10 unmet dependencies

    - by John
    I have Ubuntu 12.10 with 3.2.0.24-generic #39-Ubuntu running on a Dell Inspiron 700m laptop. I have unmet dependencies as follows: root@John-700m:/home/John# sudo apt-get remove --purge linux-image-3.5.0-{18,27,31,34}-generic Reading package lists... Done Building dependency tree Reading state information... Done Package 'linux-image-3.5.0-18-generic' is not installed, so not removed Package 'linux-image-3.5.0-27-generic' is not installed, so not removed Package 'linux-image-3.5.0-31-generic' is not installed, so not removed Package 'linux-image-3.5.0-34-generic' is not installed, so not removed You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-image-generic but it is not going to be installed linux-image-extra-3.5.0-18-generic : Depends: linux-image-3.5.0-18-generic but it is not going to be installed linux-image-extra-3.5.0-27-generic : Depends: linux-image-3.5.0-27-generic but it is not going to be installed linux-image-extra-3.5.0-31-generic : Depends: linux-image-3.5.0-31-generic but it is not going to be installed linux-image-extra-3.5.0-34-generic : Depends: linux-image-3.5.0-34-generic but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). I tried to remove the packages, but I still get the same error message. Any help would certainly be appreciated. @Eric, well noted. Here is the reults: model name : Intel(R) Pentium(R) M processor 1.60GHz flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 Thanks again. @Eric, If I need to downgrade to Ubuntu 12.04 from 12.10, can I do it without having to mess my current partition or files? I also have Windows XP running on the machine. Best. @Eric, if you are online, I could use your help (or anybody's else). I installed the package for non-pae unit and I still get the same error. Any suggestions? Thanks

    Read the article

  • Handling Indirection and keeping layers of method calls, objects, and even xml files straight

    - by Cervo
    How do you keep everything straight as you trace deeply into a piece of software through multiple method calls, object constructors, object factories, and even spring wiring. I find that 4 or 5 method calls are easy to keep in my head, but once you are going to 8 or 9 calls deep it gets hard to keep track of everything. Are there strategies for keeping everything straight? In particular, I might be looking for how to do task x, but then as I trace down (or up) I lose track of that goal, or I find multiple layers need changes, but then I lose track of which changes as I trace all the way down. Or I have tentative plans that I find out are not valid but then during the tracing I forget that the plan is invalid and try to consider the same plan all over again killing time.... Is there software that might be able to help out? grep and even eclipse can help me to do the actual tracing from a call to the definition but I'm more worried about keeping track of everything including the de-facto plan for what has to change (which might vary as you go down/up and realize the prior plan was poor). In the past I have dealt with a few big methods that you trace and pretty much can figure out what is going on within a few calls. But now there are dozens of really tiny methods, many just a single call to another method/constructor and it is hard to keep track of them all.

    Read the article

  • Picasa installs but is missing in the menu

    - by Swapnil Narendra
    Acer Aspire One Netbook Running Ubuntu Netbook Remix 10.10 (freshly installed) 1 GB Ram 150 GM HDD Space I am trying to install Picasa and when I do, it runs its course telling me that it has been installed. But when I try to look for Picasa to run it, it didnt show in the menu anywhere. I am unable to find Picasa on my system and it says that it has been installed already when I try to reinstall it. I have tried a few things; looked for the key: wget -q -O - https://dl-ssl.google.com/linux/linux_signing_key.pub | apt-key add - .. and then added it. tried the following commands after adding Picasa to my source list: sudo apt-get upgrade sudo apt-get install picasa and here is what I got: swapnil@iva-swapo-netbook:~$ sudo apt-get install picasa Reading package lists... Done Building dependency tree Reading state information... Done picasa is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. and when I tried to look for Picasa again.. I couldnt find it. So I am unable to install Picasa on my system. Please help. (I am also running this thread on ubuntu forums and havent got the solution yet so I am now here) tried Jorge's solution and it brought Picasa immediately, however I am unable to keep it in the launcher. There is no such option. All I can see is only 2 options: 1. Wine 2. Quit Still need help to keep it in the menu/launcher !

    Read the article

  • Case Management In-Depth: Stakeholders & Permissions by Mark Foster

    - by JuergenKress
    We’ve seen in the previous 3 posts in this series what Case Management is, how it can be configured in BPM Studio and its lifecycle. I now want to go into some more depth with specific areas such as:. Stakeholders & Permissions Case Activities Case Rules etc. In the process of designing a Case Management solution it is important to know what approach to take, what questions to ask and based on the answers to these questions, how to implement. I’ll start with Stakeholders & Permissions. Stakeholders The users that perform actions on case objects, defined at a business level, e.g. “Help Desk Agent”, “Help Desk Supervisor” etc. Read the full article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: ACM,BPM,Mark Foster,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Ubuntu and bumblebee and intel problem

    - by LnxSlck
    I have a brain teaser that i can't solve. When 12.04 (64bits) came out, i did a fresh install and then installed bumblebee with: sudo add-apt-repository ppa:bumblebee/stable sudo apt-get install bumblebee bumblebee-nvidia And Ubuntu recognized (System Settings - Details) Intel Card for primary card, and i could launch applications with optirun. I have: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev ff) Now, a few days back, i did the exact same thing, installed from the same DVD everything the same, installed bumblebee the same way. Nvidia with Optirun works fine, but Ubuntu doesn't have 3D effects: root@deathstar:~# optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 520MX/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no I never did anything to install Intel drivers (except installing mesa-utils), before bumblebee got everything working, but now i can't get Ubuntu to get Unity with 3D. Can someone help me please get Unity 3d working? Your help will be much appreciated

    Read the article

  • First steps with Oracle ADF Mobile for iOS and Android

    - by Bruno.Borges
    Oracle announced recently its new Mobile development platform, called Oracle ADF Mobile. With it, you can build truly Java applications, deploy and run real Java code on both Android and iOS with its self-contained Java runtime. It also comes with PhoneGap. which allows you to use any feature your phone offers, like sensors and camera. It's probably the most complete solution for mobile development out there, simply because with Oracle ADF Mobile, you can write Native, Hybrid or Web applications for your smartphone and tablet. Do you want to take a quick look on what can be done with it? Check out this video!  Now, to start with Oracle ADF Mobile, here are the first steps you will have to go through. Download Oracle JDeveloperGo to this link and download the install file for your environment (Windows, Linux-32bit or Generic) Install JDeveloper (of course)If you need help on this, look at the documentation (if you've downloaded 11gR2, click here) Download Oracle ADF Mobile BundleThis is the download page for Oracle ADF Mobile. Accept the license as usual at the top, and follow with the Download button. It will take you to another page, where you will see a table containing a download link. Click on it and it will start downloading a ZIP file. Start JDeveloperStart Oracle JDev. It may self update. Restart the IDE if you are asked to. Go to Help > Check for updates Click Next and make sure you are at the "Source" tab Select "Install From Local File" Select the Oracle ADF Mobile ZIP you downloaded on step 3 Finish the process   Now you have JDeveloper with Oracle ADF Mobile sucessfully installed! There are two great tutorials to start coding with ADF Mobile. Just choose your platform! Android Tutorial iOS Tutorial And have fun! :-) 

    Read the article

  • libgdx game not disposing

    - by Yesh
    My game does not exit entirely even after calling dispose() method. It loads a black screen when I launch it for the second time and works well if I kill the game manually and restart it. I get an error that says buffer not allocated with newUnsafeByteBuffer or already disposed when I try to dispose off the SpriteBatch object. This is were I suspect the problem to be. But not able to fix it entirely. Please help! Here is how I have built it (I have put the sample code here just to show you guys that there are no visible loop backs in dispose function, please correct me if I'm wrong)- In game screen, public void dispose() { AssetLoader.dispose(); render.dispose(); Gdx.app.exit(); } Under class AssetLoader- public void dispose(){ Texture.dispose(); sound.dispose(); } Under game render class - public void dispose(){ spritebatch.dispose(); //throws an error when I GameScreen.dispose is called font.dispose(); shaperender.dispose(); } I believe that my spritebatch isn't disposing which is causing the black screen but I cannot find a way to dispose it off successfully. Any help would be greatly appreciated.

    Read the article

  • GParted in UBUNTU shows entire disk as UNALLOCATED SPACE

    - by msPeachy
    Good day to everyone. I hope someone can help me with my problem. I have a dual boot Windows and Ubuntu system. I recently encountered an hd0 out of disk error and wasn't able to boot Ubuntu. So I booted into Windows, after 2 to 3 times of booting and rebooting Windows, I tried booting Ubuntu but still I get the hd0 out of disk error. I decided to run Ubuntu from LIVEUSB to try to fix my Ubuntu partition using GParted, but when I run GParted, it shows my entire disk as UNALLOCATED SPACE! The strange thing is that Nautilus still shows and mounts my partitions. Also every time I boot into Windows , my partitions exists and I am able to read and write to them. I have no idea what is wrong. Please help! I can't stand using Windows since most of the tools I use are in Ubuntu. I don't mind reinstalling Ubuntu. In fact I already tried reinstalling using the LIVEUSB but I wasn't able to, since GParted or the Ubuntu installer itself does not recognized my partitions and shows the entire disk as unallocated space. I am currently running Ubuntu from LIVEUSB. Here's the outpuf of sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb30ab30a Device Boot Start End Blocks Id System /dev/sda1 * 2048 104869887 52433920 83 Linux /dev/sda2 104869888 105074687 102400 7 HPFS/NTFS/exFAT /dev/sda3 105074688 156149759 25537536 7 HPFS/NTFS/exFAT /dev/sda4 156151800 625153409 234500805 f W95 Ext'd (LBA) /dev/sda5 156151808 169156591 6502392 82 Linux swap / Solaris /dev/sda6 169158656 294991871 62916608 7 HPFS/NTFS/exFAT /dev/sda7 294993920 471037944 88022012+ 7 HPFS/NTFS/exFAT /dev/sda8 471041928 625121152 77039612+ 7 HPFS/NTFS/exFAT When I run, sudo parted -l, I got this error message: ubuntu@ubuntu:~$ sudo parted -l Error: Can't have a partition outside the disk!

    Read the article

  • My search what the Cloud will mean for my Work

    - by Kay Sellenrode
    Since I finished my MCM Exchange 2007 training back in April 2009 I’m struggling with the Cloud. I know it will change the way we do things today, but how will it affect my work. My work is Exchange consultancy mostly in the Netherlands, but more and more across the globe.   In my job as a consultant I noticed last year that a large percentage of my customers showed interest in the cloud services available today. But in most situations it seemed that it wasn’t the right time for them to switch to a cloud service at this moment. Right now I’m helping one of my customers is exploring Exchange online and it looks like they will switch over from their on-premise Exchange solution. This made me more than ever realize that I need to do something to not miss the boat.     With Office 365 coming this year, my idea is that Cloud services will take off from now. Also I’m sure that quite some customers will expect me to help them with their decision between the cloud and the on premise solution. So in the next months I will explore all the possibilities of Office 365, but also some of the competition in this field.   In my search for what the cloud will mean for me and my customers, I will go over all the aspects of the offered solutions. Any help in my search is always welcome. I’m looking forward to ideas people have around the cloud and how it will change the IT environment, especially in the Unified communications field.   Next week I will post my first article about my experiences with the cloud until now.

    Read the article

  • 12.04.1 no audio through HDMI

    - by JoJo
    having a bit of an issue with getting audio to go through HDMI. Here are the base specs: OS: Ubuntu Desktop 12.04.1 x64 CPU: AMD A10-5800K 3.8G 4M FM2 R Mobo: MSI FM2-A75MA-E35 OS: Ubuntu 12.04.1 LTS Vid Card: (integrated on CPU) AMD Radeon HD 7660D HDMI sound works fine under Win7 (after mobo and vid drivers are installed), so it's not physically broken. Audio through the normal headphone jacks works fine under Ubuntu. Looking at the audio panel, there is no HDMI output at all. aplay -l also reports only: card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 In additional drivers there are two versions: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) The first installs, but problem persists. I do get more resolutions to pick from. Second version does not, reporting it failed installation and to find details at: /var/log/jockey.log Looked at the log, and it's insanely long, if necessary I can get it to you guys. Did more research and some had luck by manually installing the drivers, so tried to give that a shot by following this: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6 starting at 3.1 Manually installing Catalyst 12.6. I immediately had 2 issues, (1) the AMD website does not provide any drivers for Linux, and (2) the following command did not work: sudo sh amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precise sh: 0: Can't open amd-driver-installer-12-6-x86.x86_64.run Some other posts stated to update "alsa-drivers", but that also did not work as install command for the new version of them did not work. I forget the exact issue, but similar to above, cannot open / cannot find. Any help would be greatly appreciated!

    Read the article

  • Has anyone else read "Programming video games for the Evil Genius"

    - by Martin
    I bought this book called "Programming Video Games for the Evil Genius" by Ian Cinnamon. If there is anyone who has read or is familiar with this book I am wondering if they think it is worth reading. I am interested in making video games. I have already taken intro courses in C++, Java and Python and got through okay. I've been going through this book for about a month now(SLOWLY). All I have to do is type the code exactly in the book, BUT a lot of the code is not clearly explained. I do some research online but I usually still have some trouble answering my questions. Then I found stack overflow. It's been a ton of help. Right now I am trying to make a racing game right out of this book and I got to a point where the author left a bunch of errors in his code. One of the members of this website fixed it up for me, but added some stuff that I'm having trouble understanding. I spend more time trying to figure out the authors errors and fix them or get someone to help me fix them than I actually do learning code. I REALLY want to learn how to do this and I am ready and willing to put in the time, but I'm not sure if my time would be better spent learning from a different source. Are there any veterans out there that are familiar with this book and think it's worth it/not worth it? Should I try to move onto another book? Any advice for a fresh start for someone who wants to learn some video game programming?

    Read the article

  • Packard Bell EasyNote MZ35 freezes when AC unplugged and wireless on

    - by Sense Hofstede
    I would like to ask for some help debugging an irritating problem I'm having with my Packard Bell EasyNote MZ35 and Ubuntu 10.10. Always when the laptop is connected to a wireless network and the AC power lead is unplugged—so it's running on battery power—the system freezes. The screen turns black and shows the error GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0), although this error is completely unrelated to the actual problem. Previous searches on the internet indicate that this error is unrelated to the bug I'm experiencing. It is suggested that Ubuntu tries to hibernate or suspend and that you're seeing the black screen running 'behind' the X server. That would explain the fact that curiously you still see—but cannot move—the mouse cursor. I've already set all the values of the GConf keys in /apps/gnome-power-manager/actions/ to 'nothing', disabled all power management actions I could find, but it didn't solve the problem. It is important to note that the freeze doesn't happen immediately after you unplug the AC power lead. The icon in the notification area may have changed already, but the freeze only occurs when the Notify OSD bubble appears that tells you how many time is left with your battery. Does anyone here have a clue about this problem? A workaround or the cause? If anyone could help me with disabling possible suspend/hibernate behaviour that might be related to this issue, that would be appreciated too. This issue has been reported as bug #666852.

    Read the article

  • Minecraft in jdk 1.7.0_u2 x64

    - by Nela Drobná
    I have Ubuntu 11.10 64-bit and I installed JDK 1.7.0 update 2 x64 via webupd8 page. But currently I have problem with minecraft game. After downloading launcher from Minecraft.net and lauch the game by java -jar /home/zrebec/Downloads/minecraft.jar launcehr is launched normaly, after login the game download the updates but then I got just the black screen with this in terminal: Setting user: zrebec, -356009615199623309 Exception in thread "Minecraft main thread" java.lang.UnsatisfiedLinkError: /home/zrebec/.minecraft/bin/natives/liblwjgl.so: /home/zrebec/.minecraft/bin/natives/liblwjgl.so: wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1928) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825) at java.lang.Runtime.load0(Runtime.java:792) at java.lang.System.load(System.java:1059) at org.lwjgl.Sys$1.run(Sys.java:69) at java.security.AccessController.doPrivileged(Native Method) at org.lwjgl.Sys.doLoadLibrary(Sys.java:65) at org.lwjgl.Sys.loadLibrary(Sys.java:81) at org.lwjgl.Sys.<clinit>(Sys.java:98) at org.lwjgl.opengl.Display.<clinit>(Display.java:132) at net.minecraft.client.Minecraft.a(SourceFile:180) at net.minecraft.client.Minecraft.run(SourceFile:648) at java.lang.Thread.run(Thread.java:722) Please anyone can help me with this? I think that problem will be in architecture becase: liblwjgl.so: /home/zrebec/.minecraft/bin/natives/liblwjgl.so: wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch) Any idea please? I know, maybe this one is off topic because maybe its not Ubuntu problem maybe but in 64-bit works all perfectly and I think that accepted answer can help to many users and can make better playing games under linux. Really. Thank you very much for any idea.

    Read the article

  • TV Antenna Helper Makes HDTV Antenna Calibration a Snap

    - by ETC
    If you’re rocking an Android device, TV Antenna Helper is a free tool that will help you orient your HDTV antenna for best signal strength. The free (ad-supported) application checks your location and lists all the HDTV stations within range. You can check signal strength, use compass bearings to help align the antenna with the stations you want to tune, and check additional information about the station and your orientation to it. It’s the kind of tool you won’t need everyday but when trotted out will save you tons of time and aggravation. Hit up the link below for more information and to grab a free copy for your Android device. TV Antenna Helper [Android Market via Addictive Tips] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper] N64oid Brings N64 Emulation to Android Devices Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform]

    Read the article

  • Ubuntu 11.10 won't boot on Dell XPS 8300

    - by Phil Gorman
    I have a brand new Dell Studio XPS 8300 desktop with 17-2600 cpu, H67 chipset, 8GB DDR3, 2 1TB HDDs in mirrored RAID, and AMD Radeon 6770. Dell doesn't support Ubuntu here in Australia so it came with Windows 7 and Windows software. Yes I had to pay for an O.S. and software I didn't want to get hardware I did want, all at a greatly inflated price. It's not all beer and skittles in the land of Oz. I changed boot priorities in the BIOS to DVD and ran Ubuntu 11.10 64bit from the ISO with NOMODESET. The installation reformatted all partitions to rid me of the dreaded Windows. All was well until until reboot. The BIOS does its thing, then its "The Black Screen of Death" with a blinking cursor; no boot screen, no Grub, no keyboard, no mouse. I've searched Dell and Ubuntu forums in vain. Can you help? I would be really grateful for any advice which can help turn my big expensive paperweight into a really useful machine. Thank you in anticipation kind people. Phil

    Read the article

  • Spirent Communications Improves Customer Experience with Knowledge Management

    - by Tony Berk
    Spirent Communications plc is a global leader in test and measurement inspiring innovation within development labs, communication networks and IT organizations. The world’s leading communications companies rely on Spirent to help design, develop, validate, and deliver world-class network, devices, and services. Spirent’s customers require high levels of support for a diverse and complex product portfolio, and the company is committed to delivering on this requirement. Spirent needed a solution to help its customers get the information they need quickly and at their convenience through its Web site. After evaluating several solutions, Spirent selected and deployed Oracle Knowledge for Web Self Service Enterprise Edition. Oracle Knowledge Management uses natural language processing to understand the true intent of each inquiry logged via the support portal’s search function. The Spirent Knowledge Base on the company’s Customer Support Center (CSC) finds the best possible answer using search enhancement features?such as communications industry-specific libraries and federation to search external sources. Spirent has reduced contact center call volume while better serving its customers. Each time a customer uses the knowledge base, they find answers faster than by calling, and it saves Spirent an average of US$210 per call?which is significant when multiplied across the thousands of calls received monthly. Oracle Knowledge also helps support engineers find answers more quickly, enabling the company to scale without adding additional support engineers. Oracle Knowledge is integrated with Spirent's Siebel Contact Center implementation to provide an integrated desktop for CRM and agent intelligence, avoiding the need for contact center personnel to toggle between various screens to address customer inquiries, thereby accelerating customer service. Click here to learn more about Sprient's use of Siebel CRM and Oracle Knowledge Management.

    Read the article

  • Can windows XP be better than any Ubuntu (and Linux) distro for an old PC?

    - by Robert Vila
    The old laptop is a Toshiba 1800-100: CPU: Intel Celeron 800h Ram 128 MB (works ok) HDD: 15GB (works ok) Graphics adapter: Integrated 64-bit AGP graphics accelerator, BitBIT, 3D graphic acceleration, 8 MB Video RAM Only WindowsXP is installed, and works ok: it can be used, but it is slow (and hateful). I thought that I could improve performance (and its look) easily, since it is an old PC (drivers and everything known for years...) by installing a light Linux distro. So, I decided to install a light or customized Ubuntu distro, or Ubuntu/Debian derivative, but haven't been successful with any; not even booting LiveCDs: not even AntiX, not even Puppy. Lubuntu wiki says that it won't work because the last to releases need more ram (and some blogs say much more cpu -even core duo for new Lubuntu!-), let alone Xubuntu. The problems I have faced are: 1.There are thousands of pages talking about the same 10/15 lightweight distros, and saying more or less the same things, but NONE talks about a simple thing as to how should the RAM/swap-partition proportion be for this kind of installations. NONE! 2.Loading the LiveCD I have tried several different boot options (don't understand much about this and there's ALWAYS a line of explanation missing) and never receive error messages. Booting just stops at different stages but often seems to stop just when the X server is going to start. I am able to boot to command line. 3.I ignore whether the problem is ram size or a problem with the graphics driver (which surprises me because it is a well known brand and line of computers). So I don't know if doing a partition with a swap partition would help booting the LiveCD. 4.I would like to try the graphical interface with the LiveCD before installing. If doing the swap partition for this purpose would help. How can I do the partition? I tried to use Boot Rescue CD, but it advises me against continuing forward. I would appreciate any ideas as regards these questions. Thank you

    Read the article

  • Out-of-the-Box Integration Links Primavera Solutions with PeopleSoft Projects Applications

    - by Sylvie MacKenzie, PMP
    In a move that brings best-in-class enterprise project portfolio management to Oracle’s PeopleSoft enterprise resource planning customers, Oracle announced the integration of Oracle’s PeopleSoft projects applications and Oracle’s Primavera P6 Enterprise Project Portfolio Management. The combination of PeopleSoft financial controls and Primavera portfolio management capabilities brings greater oversight of end-to-end processes to help organizations improve the planning and execution efforts needed to deliver projects on time and within budget. “As an organization with many high-value, project-driven initiatives, we are very pleased to see Oracle’s investment in this important integration,” says Janardhanan Sankar, senior vice president for technology and quality at ITC Infotech India Ltd. Oracle’s PeopleSoft projects applications enable project-centric organizations and departments to establish core operational processes for full project lifecycle management across operations and finance. The integration with Primavera P6 Enterprise Project Portfolio Management means organizations can eliminate costly and difficult-to-maintain proprietary integrations. Organizations can also standardize on the Oracle technologies to Align back-office budgets and costs with project operations to help ensure accurate forecasting of costs, resources, and schedules Provide an accurate single source of truth to financial managers and analysts using Oracle’s PeopleSoft projects applications, and to project managers using Primavera P6 Enterprise Project Portfolio Management  Enhance project collaboration and execution by having all users utilizing common solutions to communicate, plan, and deliver projects “By bringing together Oracle’s PeopleSoft projects applications and Oracle’s Primavera P6 Enterprise Project Portfolio Management, we are able to provide customers with the infrastructure they need to achieve a single source of truth on the projects they are managing,” says Paco Aubrejuan, Oracle’s group vice president and general manager, PeopleSoft. “This real-time visibility drives profitability, increases productivity, and improves operations.” For more information, view the on-demand Webcast, “Bridging Business Processes for Optimal Portfolio Performance,” or read about the new integration.

    Read the article

  • boot up fails. drops to initramfs prompt 12.04

    - by dpm
    I am running an HP pavilion dv6000 dual boot win7 and Ubuntu 12.04. (well, up until today). after a reboot, the boot process drops to the busy box shell and i end up at the prompt: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Ive been researching others who have had this same problem, but haven't been able to find any of those solutions to work for me. I tried the method described here: http://www.proposedsolution.com/solutions/ubuntu-booting-to-initramfs-prompt/ and after the final command mount -t ntfs-3g /dev/sda1 /root -o force it does nothing and gives me another (initramfs) prompt. I can boot to a live CD (USB) and get to a terminal, but it doesn't seem to do much good, as I can see the /dev/sda1 in the ls command, but it doesn't recognize it when I try to cd to it. My command line skills are very green, and am just starting to grasp them. One more question: using the command fdisk -l how can I tell which mount point (sda1/sda2) is my windows partition and which one is Ubuntu? Any help? I'm in a bit over my head right now...

    Read the article

  • Links for Getting Started with PowerShell for Office 365 and Exchange Online

    - by Brian Jackett
    This past week I worked with some customers who were getting started with using PowerShell against Exchange Online as part of their new Office 365 solution.  As you may know Exchange is not my primary focus area but since these customers’ needs centered around PowerShell I thought this would be a good opportunity to learn more.  What soon became apparent to me was a few things: The output / objects returned from Exchange Online vs. on-premises commandlets sometimes differ (mainly due to Exchange Online output needing to be serialized across the wire) Some of the community scripts posted on TechNet Script Center or PoSH Code Repository that work for on-premises won’t work against Exchange Online due to the above I went to multiple resources to get an introduction of using the Exchange Online commandlets      In light of the last item I would like to share some resources I gathered for getting started with the Exchange Online commandlets.  I will address the first two items in a follow up post that shows one sample script that I helped a customer fix.   Links Using PowerShell with Office365 http://blah.winsmarts.com/2011-4-Using_PowerShell_with_Office365.aspx   Administering Microsoft Office 365 using WIndows PowerShell http://blog.powershell.no/2011/05/09/administering-microsoft-office-365-using-windows-powershell/   Reference to Available PowerShell Cmdlets in Exchange Online http://help.outlook.com/en-us/140/dd575549.aspx   Windows PowerShell cmdlets for Office 365 http://onlinehelp.microsoft.com/en-us/office365-enterprises/hh125002.aspx   Role Based Access Control in Exchange Online http://help.outlook.com/en-us/140/dd207274.aspx   Exchange Online and RBAC http://blogs.technet.com/b/ilvancri/archive/2011/05/16/exchange-online-office365-and-rbac.aspx   Conclusion    Office 365 is being integrated into more and more customers’ environments.  While your PowerShell skills can still be used to manage certain portions of Office 365 (Exchange Online as of the time of this writing) there are a few differences in how data is passed back and forth.  Hopefully the links above will get you started on scripting against  cloud based services.         -Frog Out

    Read the article

  • Portal and Content - Components, part 3 – Applied Customization Framework (4 of 7)

    - by Stefan Krantz
    Have you ever been challenged with the situation where your work task asks you to implement functionality in the WebCenter Portal and you browse through the Resource Catalog (Business Dictionary) and find the functionality you need. However when you get started there is small short comings and you ask your self- how can I re-use what is out of the box ca?- I wonder what code I need to use to produce the similar functions and include my new requirements?- Must I write a new taskflow? The answer to above questions are in many times answered with simply you can  do a taskflow customization to out-of-the-box taskflows. In this post I will help you understand how to do such customization. Best described is a 4 step process, see image flow below for illustration: Just to clarify few naming confusions that might occur when go through above process. Customization Role is a function within JDeveloper that will allow you to implement view and flow customizations to existing taskflows WebCenter Portal – Spaces Taskflow Customization Framework this technology scope do not only refer to WebCenter Spaces, this also include WebCenter Portal/Framework A taskflow customization do not overwrite or replace any code, it just creates an additional tip view of the taskflow in the MDS for the current application (WebCenter Portal or WebCenter Spaces) To sum up this simple procedure I also like to help you find your way around the main topic for this post series, this post series is focusing primarily on Content integration with WebCenter Portal, so where can I find content related taskflows in the WebCenter Libraries. The list below mention some useful locations to taskflows and each taskflow page fragments. Library Reference - WebCenter Document Library Service View Content Presenter Path: oracle.webcenter.doclib.view.jsf.taskflows.presenterTaskflow: contentPresenter.xml - The Content Presenter taskflowTaskflow: contentPresenterWizard.xml - The publishing wizard to select content, select template and preview including contributionDocument Manager Path: oracle.webcenter.doclib.view.jsf.taskflows.docManager Taskflow: documentManager.xml - The Document Manager taskflow which includes references to document management feature including browsing, download, uploading and viewing. For more information on Taskflow customizations please see following documentation:http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_taskflows.htm#BACIEGJD

    Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >