Search Results

Search found 9271 results on 371 pages for 'whole foods'.

Page 333/371 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

• Suggestions for designing large-scale Java webapp from the group up

  - by Chris Thompson

  Hi all, I'm about to start developing a large-scale system and I'm struggling with which direction to proceed. I've done plenty of Java web apps before and I have plenty of experience with servlet containers and GWT and some experience with Spring. The problem is most of my webapps have been thrown together just to be a proof of concept and what I'm struggling with is what set of frameworks to use. I need to have both a browser based application as well as a web service designed to support access from mobile devices (Android and iPhone for now). Ideally, I'd like to design this system in such a way that I don't end up rewriting all of my servlets for each client (browser and phone) although I don't mind having some small checks in there to properly format the data. In addition, although I'm the only developer now, that won't necessarily be the case down the road and I'd like to design something that scales well both with regards to traffic and number of developers (isn't just a nightmare to maintain). So where I am now is planning on using GWT to design the browser-based interface but I'm struggling with how to reuse that code with to present the interface (most likely xml) for the mobile devices. Using GWT RPC would, I think, make it relatively easy to do all of the AJAX in the browser, but might make generating xml for the mobile phones difficult. In addition, I like the idea of using something like Hibernate for persistence and Spring Security to secure the whole thing. Again, I'm not sure how well those will cooperate with GWT (I think Hibernate should be fine...) There's obviously a lot more to this than I've presented here, but I've tried to give you the 5-minute overview. I'm a bit stumped and was wondering if anybody in the community had any experience starting from this place. Does what I'm trying to do make sense? Is it realistic? I have no doubt I can make all of these frameworks speak the same language, I'm just wondering if it's worth my time to fight with them. Also, am I missing a framework that would be really beneficial? Thanks in advance and sorry for the relatively broad question... Chris

  Read the article

• Floating point vs integer calculations on modern hardware

  - by maxpenguin

  I am doing some performance critical work in C++, and we are currently using integer calculations for problems that are inherently floating point because "its faster". This causes a whole lot of annoying problems and adds a lot of annoying code. Now, I remember reading about how floating point calculations were so slow approximately circa the 386 days, where I believe (IIRC) that there was an optional co-proccessor. But surely nowadays with exponentially more complex and powerful CPUs it makes no difference in "speed" if doing floating point or integer calculation? Especially since the actual calculation time is tiny compared to something like causing a pipeline stall or fetching something from main memory? I know the correct answer is to benchmark on the target hardware, what would be a good way to test this? I wrote two tiny C++ programs and compared their run time with "time" on Linux, but the actual run time is too variable (doesn't help I am running on a virtual server). Short of spending my entire day running hundreds of benchmarks, making graphs etc. is there something I can do to get a reasonable test of the relative speed? Any ideas or thoughts? Am I completely wrong? The programs I used as follows, they are not identical by any means: #include <iostream> #include <cmath> #include <cstdlib> #include <time.h> int main( int argc, char** argv ) { int accum = 0; srand( time( NULL ) ); for( unsigned int i = 0; i < 100000000; ++i ) { accum += rand( ) % 365; } std::cout << accum << std::endl; return 0; } Program 2: #include <iostream> #include <cmath> #include <cstdlib> #include <time.h> int main( int argc, char** argv ) { float accum = 0; srand( time( NULL ) ); for( unsigned int i = 0; i < 100000000; ++i ) { accum += (float)( rand( ) % 365 ); } std::cout << accum << std::endl; return 0; } Thanks in advance!

  Read the article

• R Install/Update on Mac OS X (Snow Leopard): where does R put files during install/config?

  - by doug

  In sum, there's a stray preference-like file or two (probably just one) that i can't find. Here's the whole story: I recently attempted to update my R install from 2.10 to 2.11. As i have done before, i installed from source. I know that all of the dependencies are correctly installed and made available to R, because my prior install worked fine. When i upgraded to 2.11, i am unable to install packages (no exception thrown, it just doesn't appear to complete the install and is unresponsive so i have to quit + restart R. Given i install from source, there are any number of points in the process that i could have messed up. What i need to do now is "start over" which requires that i clear out my my prior install. I am having trouble doing that. There is still at least one preference file or something like that i can't find and one of these is causing the problem, so i need to find it and terminate it with extreme prejudice before i do a fresh install. Although i set a number of flags during the install, i have never opted out of the default install locations during the config step. There has to be one or more preference files still in my file structure (and that's also accessible to the new install of R) because after i follow all of the steps below, then do a fresh install, when i start R for the first time, some of my preferences have persisted (e.g., quartz settings, GUI background color, editor selection, etc.). Again, the problem is that i just cannot locate those files. Finally, the problem can't be that during my last install from source, i inadvertently caused a preference file to be sent to an off-spec location--because again, a fresh R install (whether from source or from the OS X binaries) is finding those files Here's what i've done prior to attempting a clean install of R: Removed files from these locations: ~/.RData ~/.RHistory /Applications/R64.app /Applications/R.app /Library/Frameworks/R.framework (i also removed all symlinks from these) Cleared all RAM and disk caches, in particular the directory where i know R caches: ~/Library/Caches/R* (in fact i've cleared this entire directory) Checked for all 'hidden' files in the OS X directories where login/startup files are often placed: /etc/ ~/ In addition, i've checked R-help, and i've also read through the relevant portions of 'R Installation and Administration'--no luck. I've also searched searched my file structure using the various bash utilities, which nearly always solves problems of this sort quite easily, but in this case obviously searching by name or even pattern is more problematic.

  Read the article

• Tunnel over HTTPS

  - by ephemient

  At my workplace, the traffic blocker/firewall has been getting progressively worse. I can't connect to my home machine on port 22, and lack of ssh access makes me sad. I was previously able to use SSH by moving it to port 5050, but I think some recent filters now treat this traffic as IM and redirect it through another proxy, maybe. That's my best guess; in any case, my ssh connections now terminate before I get to log in. These days I've been using Ajaxterm over HTTPS, as port 443 is still unmolested, but this is far from ideal. (Sucky terminal emulation, lack of port forwarding, my browser leaks memory at an amazing rate...) I tried setting up mod_proxy_connect on top of mod_ssl, with the idea that I could send a CONNECT localhost:22 HTTP/1.1 request through HTTPS, and then I'd be all set. Sadly, this seems to not work; the HTTPS connection works, up until I finish sending my request; then SSL craps out. It appears as though mod_proxy_connect takes over the whole connection instead of continuing to pipe through mod_ssl, confusing the heck out of the HTTPS client. Is there a way to get this to work? I don't want to do this over plain HTTP, for several reasons: Leaving a big fat open proxy like that just stinks A big fat open proxy is not good over HTTPS either, but with authentication required it feels fine to me HTTP goes through a proxy -- I'm not too concerned about my traffic being sniffed, as it's ssh that'll be going "plaintext" through the tunnel -- but it's a lot more likely to be mangled than HTTPS, which fundamentally cannot be proxied Requirements: Must work over port 443, without disturbing other HTTPS traffic (i.e. I can't just put the ssh server on port 443, because I would no longer be able to serve pages over HTTPS) I have or can write a simple port forwarder client that runs under Windows (or Cygwin) Edit DAG: Tunnelling SSH over HTTP(S) has been pointed out to me, but it doesn't help: at the end of the article, they mention Bug 29744 - CONNECT does not work over existing SSL connection preventing tunnelling over HTTPS, exactly the problem I was running into. At this point, I am probably looking at some CGI script, but I don't want to list that as a requirement if there's better solutions available.

  Read the article

• Unable to verify body hash for DKIM

  - by Joshua

  I'm writing a C# DKIM validator and have come across a problem that I cannot solve. Right now I am working on calculating the body hash, as described in Section 3.7 Computing the Message Hashes. I am working with emails that I have dumped using a modified version of EdgeTransportAsyncLogging sample in the Exchange 2010 Transport Agent SDK. Instead of converting the emails when saving, it just opens a file based on the MessageID and dumps the raw data to disk. I am able to successfully compute the body hash of the sample email provided in Section A.2 using the following code: SHA256Managed hasher = new SHA256Managed(); ASCIIEncoding asciiEncoding = new ASCIIEncoding(); string rawFullMessage = File.ReadAllText(@"C:\Repositories\Sample-A.2.txt"); string headerDelimiter = "\r\n\r\n"; int headerEnd = rawFullMessage.IndexOf(headerDelimiter); string header = rawFullMessage.Substring(0, headerEnd); string body = rawFullMessage.Substring(headerEnd + headerDelimiter.Length); byte[] bodyBytes = asciiEncoding.GetBytes(body); byte[] bodyHash = hasher.ComputeHash(bodyBytes); string bodyBase64 = Convert.ToBase64String(bodyHash); string expectedBase64 = "2jUSOH9NhtVGCQWNr9BrIAPreKQjO6Sn7XIkfJVOzv8="; Console.WriteLine("Expected hash: {1}{0}Computed hash: {2}{0}Are equal: {3}", Environment.NewLine, expectedBase64, bodyBase64, expectedBase64 == bodyBase64); The output from the above code is: Expected hash: 2jUSOH9NhtVGCQWNr9BrIAPreKQjO6Sn7XIkfJVOzv8= Computed hash: 2jUSOH9NhtVGCQWNr9BrIAPreKQjO6Sn7XIkfJVOzv8= Are equal: True Now, most emails come across with the c=relaxed/relaxed setting, which requires you to do some work on the body and header before hashing and verifying. And while I was working on it (failing to get it to work) I finally came across a message with c=simple/simple which means that you process the whole body as is minus any empty CRLF at the end of the body. (Really, the rules for Body Canonicalization are quite ... simple.) Here is the real DKIM email with a signature using the simple algorithm (with only unneeded headers cleaned up). Now, using the above code and updating the expectedBase64 hash I get the following results: Expected hash: VnGg12/s7xH3BraeN5LiiN+I2Ul/db5/jZYYgt4wEIw= Computed hash: ISNNtgnFZxmW6iuey/3Qql5u6nflKPTke4sMXWMxNUw= Are equal: False The expected hash is the value from the bh= field of the DKIM-Signature header. Now, the file used in the second test is a direct raw output from the Exchange 2010 Transport Agent. If so inclined, you can view the modified EdgeTransportLogging.txt. At this point, no matter how I modify the second email, changing the start position or number of CRLF at the end of the file I cannot get the files to match. What worries me is that I have been unable to validate any body hash so far (simple or relaxed) and that it may not be feasible to process DKIM through Exchange 2010.

  Read the article

• Binary socket and policy file in Flex

  - by Daniil

  Hi, I'm trying to evaluate whether Flex can access binary sockets. Seems that there's a class calles Socket (flex.net package). The requirement is that Flex will connect to a server serving binary data. It will then subscribe to data and receive the feed which it will interpret and display as a chart. I've never worked with Flex, my experience lies with Java, so everything is new to me. So I'm trying to quickly set something simple up. The Java server expects the following: DataInputStream in = ..... byte cmd = in.readByte(); int size = in.readByte(); byte[] buf = new byte[size]; in.readFully(buf); ... do some stuff and send binary data in something like out.writeByte(1); out.writeInt(10000); ... etc... Flex, needs to connect to a localhost:6666 do the handshake and read data. I got something like this: try { var socket:Socket = new Socket(); socket.connect('192.168.110.1', 9999); Alert.show('Connected.'); socket.writeByte(108); // 'l' socket.writeByte(115); // 's' socket.writeByte(4); socket.writeMultiByte('HHHH', 'ISO-8859-1'); socket.flush(); } catch (err:Error) { Alert.show(err.message + ": " + err.toString()); } The first thing is that Flex does a <policy-file-request/>. I've modified the server to respond with: <?xml version="1.0"?> <!DOCTYPE cross-domain-policy SYSTEM "/xml/dtds/cross-domain-policy.dtd"> <cross-domain-policy> <site-control permitted-cross-domain-policies="master-only"/> <allow-access-from domain="192.168.110.1" to-ports="*" /> </cross-domain-policy> After that - EOFException happens on the server and that's it. So the question is, am I approaching whole streaming data issue wrong when it comes to Flex? Am I sending the policy file wrong? Unfortunately, I can't seem to find a good solid example of how to do it. It seems to me that Flex can do binary Client-Server application, but I personally lack some basic knowledge when doing it. I'm using Flex 3.5 in IntelliJ IDEA IDE. Any help is appreciated. Thank you!

  Read the article

• Oracle sample data problems

  - by Jay

  So, I have this java based data trasformation / masking tool, which I wanted to test out on Oracle 10g. The good part with Oracle 10g is that you get a load of sample schemas with half a million records in some. The schemas are : SH, OE, HR, IX and etc. So, I installed 10g, found out that the installation scripts are under ORACLE_HOME/demo/scripts. I customized these scripts a bit to run in batch mode. That solves one half of my requirement - to create source data for my testing my data transformation software. The second half of the requirement is that I create the same schemas under different names (TR_HR, TR_OE and so on...) without any data. These schemas would represent my target schemas. So, in short, my software would pick up data from a table in a schema and load it up in to the same table in a different schema. Now, I have two issues in creating my target schema and emptying it. I would like this in a batch job. But the oracle scripts you get, the sample schema names are not configurable. So, I tried creating a script, replacing OE with TR_OE, HR with TR_HR and so on. However, this approach is kind of irritating coz the sample schemas are kind of complicated in the way they are created; Oracle creates synonyms, views, materialized views, data types and lot of weird stuff. I would like the target schemas (TR_HR, TR_OE,...) to be empty. But some of the schemas have circular references, which would not allow me to delete data. The only work around seems to be removing certain foreign keys, deleting data and then adding the constraints back. Is there any easy way to all this, without all this fuss? I would need a complicated data set for my testing (complicated as in tables with triggers, multiple hierarchies.. for instance.. a child table that has children up to 5 levels, a parent table that refers to an IOT table and an IOT table that refers to a non-IOT table etc..). The sample schemas are just about perfect from a data set perspective. The only challenge I see is in automating this whole process of loading up the source schemas, and then creating the target schemas and emptying them. Appreciate your help and suggestions.

  Read the article

• Upload large files via a webpage

  - by Hultner

  What way is the best way to let users upload large files from there webbrowser to a server. I'm talking 200MB+ possible up to a few gigatyes. I have been thinking of a few possible solutions to the problem (not tried them yet) and this is basically the things I came up with. Server download speed will not be a problem but the users connection possibly could. Having some sort of applet on the client side written in Java or Flash which sends the file in parts (is this possible with an applet) to a php/other script on the server and a checksum+ some other info about the file. On the server scripts all the parts and the info file is saved in a temporary directory wich has a unique name based on the checksum of the file and the ip of the user. When the last chunk is sent the applet sends a signal to the server saying it's finished and the server put the file together in the right location. If a chunk doesn't match the checksum for that part the server will send a response to the applet telling it to reupload that chunk. I don't know how important the checksum checking is since it's all tcpackages, someone with more insigth migth be able to answer on that. This is probably the worst way, changing the settings on your server to allow huge fileuploads via an inputfiel. Do it like a normal transfer. User an uploadmanager which does pretty much the same thing as applet i mentioned above. Pros of the first is probably that it would most likely be rather secure, you could show progress as well and possibly resume an upload if ip hasn't changed and do a threaded upload of the chunks. Cons of the first is that the user will need flash/java for it to work. Pros of the 2nd is that it will pretty much work for everyone but cons are big, first there's no way resuming an intruppted download and if something is wrong the whole file would have to be reuploaded is a few of cons. For the third one the pros is pretty muc the same as for the first but the cons is that the user would have to download an application to their computer and run and the application will have to be have to be compatible with their computer and OS. Another way may be a combination of two. Lets say an applet for bigger or more files and a simple input which is rather restricted to maybe max 10-20MB for smaller files and comability. There are probably other much smarter ways to tackle this and that's why I'm asking for advice here on SO.

  Read the article

• Git/Mercurial (hg) opinion

  - by Richard

  First, let me say I'm not a professional programmer, but an engineer who had a need for it and had to learn. I was always working alone, so it was just me and my seven splitted personalities ... and we worked okey as a team :) Most of my stuff is done in C/Fortran/Matlab and so far I've been learning git to manage it all. However, although I've had no unsolvable problems with it, I've never been "that" happy with it ... for everything I cannot do, I hae to look up a book. And, for some time now I've been hearning a lot of good stuff about hg. Now, a coleague of mine will have to work with me on a project (I almost feel sorry for him) and he's started learning hg (says he likes it more), and I'm considering the switch myself. We work almost exclusivly on Windows platform (although I manage relatively ok using unix tools and things that come from that part of the world). So, I was wondering, in a described scenario, what problems could I expect with the switch. I heard that hg is rather more user friendly towards windows users, regarding the user interfaces. How does it handle repositories ? Does it create them the same way as git does (just one subdirectory in a working directory) and can I just copy the whole project directory (including git repo) and just carry them somewhere with no extra thinking ? (I really liked that when I was choosing over git/svn). Are there any good books on it that you can recommend (something like Pro Git, only for Hg). What are good ways to implement hg into Visual Studio/GVim for Windows, or into Windows Explorer so I can work relatively easily (I would like to avoid using the command line for everything regarding it, like in git shell). Is there something else I should be aware of (please, on this don't point me to other questions ... they just give me a ton of info, and I'm not sure what is it that I should take as important, and what to disregard). I'm trying to cut some time, since I cannot spend all that time relearning hg, like I did for git. I've also heard git is c project, while mercurial is python ... is there any noticeable difference in speed. git was pretty speedy ... will I encounter some waiting while working. Notice: All my projects are of let's say, middle size ... mostly numerical simulations ... 10-15000 lines (medium size?)

  Read the article

• Efficiency of data structures in C99 (possibly affected by endianness)

  - by Ninefingers

  Hi All, I have a couple of questions that are all inter-related. Basically, in the algorithm I am implementing a word w is defined as four bytes, so it can be contained whole in a uint32_t. However, during the operation of the algorithm I often need to access the various parts of the word. Now, I can do this in two ways: uint32_t w = 0x11223344; uint8_t a = (w & 0xff000000) >> 24; uint8_t b = (w & 0x00ff0000) >> 16; uint8_t b = (w & 0x0000ff00) >> 8; uint8_t d = (w & 0x000000ff); However, part of me thinks that isn't particularly efficient. I thought a better way would be to use union representation like so: typedef union { struct { uint8_t d; uint8_t c; uint8_t b; uint8_t a; }; uint32_t n; } word32; Using this method I can assign word32 w = 0x11223344; then I can access the various parts as I require (w.a=11 in little endian). However, at this stage I come up against endianness issues, namely, in big endian systems my struct is defined incorrectly so I need to re-order the word prior to it being passed in. This I can do without too much difficulty. My question is, then, is the first part (various bitwise ands and shifts) efficient compared to the implementation using a union? Is there any difference between the two generally? Which way should I go on a modern, x86_64 processor? Is endianness just a red herring here? I could inspect the assembly output of course, but my knowledge of compilers is not brilliant. I would have thought a union would be more efficient as it would essentially convert to memory offsets, like so: mov eax, [r9+8] Would a compiler realise that is what happening in the bit-shift case above? If it matters, I'm using C99, specifically my compiler is clang (llvm). Thanks in advance.

  Read the article

• Alternatives to requiring users to register for an account?

  - by jamieb

  I'm working on a side project to build a new web app idea of mine. For the sake of discussion, let's say this app displays a random photograph of a famous work of art. On a scale of 1 to 5, users are asked to rate how well they like each piece of art, and then are shown the next photo. Eventually, the app is able to get an sense of the person's style and is able to recommend artwork that he/she may find pleasing. The whole concept is similar to Netflix. I understand how to do all the preference matching logic (although not as sophisticated as Netflix). But I'd like to find a way to do this without requiring that users create an account first. This is a novelty website that a typical user might use only a handful of times. Requiring registration is overkill and will likely drastically reduce it's utility. I'd like to allow people to begin rating artwork within five seconds of their initial pageview, yet maintain the integrity of the voting (since recommendations are predicated on how other people have rated the various pieces of artwork). Can it be done? Some ideas: OpenID. The perfect solution except for the fact that it's not wildly used and my target audience isn't the most technically adept demographic. Text message. User inputs phone number and is texted a four digit code to key into the web app. Quick, easy, and great way to limit abuse. However, privacy concerns abound... people are probably even less likely to give me their phone number than their email address. Facebook login. I personally don't have a Facebook account due to privacy concerns. And I'd really hate to support such a proprietary platform. Hash code/Bookmark. Vistor's initial pageview generates a 5 or 6 digit alphanumeric code that is embedded in each subsequent URL. They can bookmark any page to save their state. Good: Very simple system that doesn't require any user action. Bad: Very easy to stuff the ballot box, might be difficult to account for users sharing the link containing their ID code via email or social networking sites.

  Read the article

• java, swing, Gridlayout problem

  - by josh

  I have a panel with GridLayout But when I'm trying to run the program, only the first button out of 100 is shown. Futhermore, the rest appear only when I move the cursor over them. What's wrong with it? Here's the whole class(Life.CELLS=10 and CellButton is a class which extends JButton) public class MainLayout extends JFrame { public MainLayout() { setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); setSize(650, 750); setLayout(new FlowLayout()); //setResizable(false); final JPanel gridPanel = new JPanel(new GridLayout(Life.CELLS, Life.CELLS)); for (int i=0; i<Life.CELLS; i++) { for (int j=0; j<Life.CELLS; j++) { CellButton jb = new CellButton(i, j); jb.setPreferredSize(new Dimension(jb.getIcon().getIconHeight(), jb.getIcon().getIconWidth())); buttons[i][j] = jb; grid[i][j] = false; gridPanel.add(jb); } } add(gridPanel); } } This is code of CellButton package classes; import javax.swing.JButton; import javax.swing.ImageIcon; import javax.swing.JFrame; public class CellButton extends JButton { private int x; private int y; boolean alive; ImageIcon icon; boolean next; // icons for grids final ImageIcon dead = new ImageIcon(JFrame.class.getResource("/images/image1.gif")); final ImageIcon live = new ImageIcon(JFrame.class.getResource("/images/image2.gif")); public CellButton(int X, int Y) { super(); x = X; y = Y; alive = false; icon = dead; setIcon(icon); } public int getX() { return x; } public int getY() { return y; } public boolean isAlive() { return alive; } public void relive() { alive = true; icon = live; setIcon(icon); } public void die() { alive = false; icon = dead; setIcon(icon); } public void setNext(boolean n) { next = n; } public boolean getNext() { return next; } public ImageIcon getIcon() { return icon; } }

  Read the article

• Delay keyboard input help

  - by Stradigos

  I'm so close! I'm using the XNA Game State Management example found here and trying to modify how it handles input so I can delay the key/create an input buffer. In GameplayScreen.cs I've declared a double called elapsedTime and set it equal to 0. In the HandleInput method I've changed the Key.Right button press to: if (keyboardState.IsKeyDown(Keys.Left)) movement.X -= 50; if (keyboardState.IsKeyDown(Keys.Right)) { elapsedTime -= gameTime.ElapsedGameTime.TotalMilliseconds; if (elapsedTime <= 0) { movement.X += 50; elapsedTime = 10; } } else { elapsedTime = 0; } The pseudo code: If the right arrow key is not pressed set elapsedTime to 0. If it is pressed, the elapsedTime equals itself minus the milliseconds since the last frame. If the difference then equals 0 or less, move the object 50, and then set the elapsedTime to 10 (the delay). If the key is being held down elapsedTime should never be set to 0 via the else. Instead, after elapsedTime is set to 10 after a successful check, the elapsedTime should get lower and lower because it's being subtracted by the TotalMilliseconds. When that reaches 0, it successfully passes the check again and moves the object once more. The problem is, it moves the object once per press but doesn't work if you hold it down. Can anyone offer any sort of tip/example/bit of knowledge towards this? Thanks in advance, it's been driving me nuts. In theory I thought this would for sure work. CLARIFICATION Think of a grid when your thinking about how I want the block to move. Instead of just fluidly moving across the screen, it's moving by it's width (sorta jumping) to the next position. If I hold down the key, it races across the screen. I want to slow this whole process down so that holding the key creates an X millisecond delay between it 'jumping'/moving by it's width. EDIT: Turns out gameTime.ElapsedGameTime.TotalMilliseconds is returning 0... all of the time. I have no idea why.

  Read the article

• VS 2008 irritating copy constructor link dependency

  - by Paul Hollingsworth

  Hi guys, I've run into the following annoying and seemingly incorrect behaviour in the Visual Studio 2008 C++ compiler: Suppose I have a class library - Car.lib - that uses a "Car" class, with a header called "Car.h": class Car { public: void Drive() { Accelerate(); } void Accelerate(); }; What I'm actually trying to do is use the Car headers (for some other functions), but without having to link with Car.lib itself (the actual class is not called "Car" but I am sanitising this example). If I #include "Car.h" in the .cpp file used to build a managed C++ .dll, but never refer to Car, everything compiles and links fine. This is because I never instantiate a Car object. However, the following: namespace { class Car { public: Car(const Car& rhs) { Accelerate(); } void Accelerate(); }; } leaves me with the link error: Error 2 error LNK2001: unresolved external symbol "public: void __thiscall `anonymous namespace'::Car::Accelerate(void)" (?Accelerate@Car@?A0xce3bb5ed@@$$FQAEXXZ) CREObjectWrapper.obj CREObjectBuilderWrapper Note I've declared the whole thing inside an anonymous namespace so there's no way that the Car functions could be exported from the .DLL in any case. Declaring the copy constructor out-of-line makes no difference. i.e. the following also fails to link: class Car { public: Car(const Car& rhs); void Accelerate(); }; Car::Car(const Car& rhs) { Accelerate(); } It's something specifically to do with the copy constructor note, because the following, for example, does link: class Car { public: Car() { Accelerate(); } void Accelerate(); }; I am not a C++ standards guru but this doesn't seem correct to me. Surely the compiler still should not have had to even generate any code that calls the Car copy constructor. Can anyone confirm if this behaviour is correct? It's been a while since I used C++ - but I don't think this used to be an issue with Visual Studio 6.0 for example. Can anyone suggest a workaround that allows one to "re-use" the Accelerate method from within the copy constructor and still have the copy constructor declared inline?

  Read the article

• Calculate # of Rowspans and Colspans based on keys in a Multi-Array

  - by sologhost

  Ok, I have these 2 types of layouts, basically, it can be any layout really. I have decided to use tables for this, since using div tags cause undesirable results in some possible layout types. Here are 2 pics that describe the returned results of row and column: This would return the $layout array like so: $layout[0][0] $layout[0][1] $layout[1][1] In this layout type: $layout[1][0] is NOT SET, or doesn't exist. Row 1, Column 0 doesn't exist in here. So how can we use this to help us determine the rowspans...? Ok, this layout type would now return the following: $layout[0][0] $layout[0][1] $layout[1][0] $layout[2][0] $layout[2][1] $layout[3][1] Again, there are some that are NOT SET in here: $layout[1][1] $layout[3][0] Ok, I have an array called $layout that does a foreach on the row and column, but it doesn't grab the rows and columns that are NOT SET. So I created a for loop (with the correct counts of how many rows there are and how many columns there are). Here's what I got so far: // $not_set = array(); for($x = 0; $x < $cols; $x++) { $f = 0; for($p = 0; $p < $rows; $p++) { // $f = count($layout[$p]); if(!isset($layout[$p][$x])) { $f++; // It could be a rowspan or a Colspan... // We need to figure out which 1 it is! /* $not_set[] = array( 'row' => $p, 'column' => $x, ); */ } // if ($rows - count($layout[$p])) } } Ok, the $layout array has 2 keys. The first 1 is [ row ] and the 2nd key is [ column ]. Now looping through them all and determining whether it's NOT SET, tells me that either a rowspan or a colspan needs to be put into something somewhere. I'm completely lost here. Basically, I would like to have an array returned here, something like this: $spans['row'][ row # ][ column # ] = Number of rowspans for that <td> element. $spans['column'][ row # ][ column # ] = Number of colspans for that <td> element. It's either going to need a colspan or a rowspan, it will definitely never need both for the same element. Am I going about this whole thing the wrong way? Any help at all would be greatly appreciated!! I've been driving myself crazy with this for days! Pllleaase...

  Read the article

• Override variables while testing a standalone Perl script

  - by BrianH

  There is a Perl script in our environment that I now need to maintain. It is full of bad practices, including using (and re-using) global variables throughout the script. Before I start making changes to the script, I was going to try to write some test scripts so I can have a good regression base. To do this, I was going to use a method described on this page. I was starting by writing tests for a single subroutine. I put this line somewhat near the top of the script I am testing: return 1 if ( caller() ); That way, in my test script, I can require 'script_to_test.pl'; and it won't execute the whole script. The first subroutine I was going to test makes a lot of use of global variables that are set throughout the script. My thought was to try to override these variables in my test script, something like this: require_ok('script_to_test.pl'); $var_from_other_script = 'Override Value'; ok( sub_from_other_script() ); Unfortunately (for me), the script I am testing has a massive "my" block at the top, where it declares all variables used in the script. This prevents my test script from seeing/changing the variables in the script I'm running tests against. I've played with Exporter, Test::Mock..., and some other modules, but it looks like if I want to be able to change any variables I am going to have to modify the other script in some fashion. My goal is to not change the other script, but to get some good tests running so when I do start changing the other script, I can make sure I didn't break anything. The script is about 10,000 lines (3,000 of them in the main block), so I'm afraid that if I start changing things, I will affect other parts of the code, so having a good test suite would help. Is this possible? Can a calling script modify variables in another script declared with "my"? And please don't jump in with answers like, "Just re-write the script from scratch", etc. That may be the best solution, but it doesn't answer my question, and we don't have the time/resources for a re-write.

  Read the article

• Exclude one or more elements from being connected (using connectWith) in jQuery's sortable lists

  - by Lev

  I have two lists, one with an ID of "vlist" and one with an ID of "hlist". The "vlist" holds elements which should be visible, while the "hlist" holds items that should remain hidden. The idea here is to allow the administrator of the system to specify which elements/fields should be shown on a sign-up page, and which shouldn't. The two lists are connected using "connectWith", so the administrator can drag items from the visible list to the hidden list (or vice versa). My dilemma is that there are a few fields I want locked into the visible list, but still sortable within that one list. For example, the "username", "email" and "password" fields should be locked within the visible list (as they always need to be used for registration). Is this even possible? Perhaps it is a no-brainer that I simply haven't discovered yet. I've looked around through jQuery's documentation for a while and can't seem to find anything related to this scenario. I have found how you can "cancel" specific elements in the list from being sortable altogether or even disabled from being a dropable target, but this doesn't do it. The user should still have the ability to drag these items within the "visible" list, in case they want to adjust the ordering of the locked fields. I'm also aware that you can contain sortable elements within a specific element or DOM object, but this also can't be used as this only seems to apply to the whole sortable list, and not specific elements of that list. I've even tried to see if something like this would work after I built the sortable listing(s): $('#vlist > #slist-li-username').sortable('option', 'containment', '#vlist'); Obviously, that didn't work either or I wouldn't be posting this. In case it might help, I thought I'd throw in the code I'm using now; here is the jQuery code: $(function() { $('#vlist, #hlist').sortable ({ connectWith: '.signup-set_flist', forcePlaceholderSize: true, receive: function (event, ui) { var itemID = ui.item.attr('id'); var fID = itemID.replace(/slist-li-/g, ''); var hID = 'slist-' + fID; if (ui.sender.attr('id') == 'vlist') { $('#'+hID).val(''); } else { $('#'+hID).val(fID); } } }).disableSelection(); $('#vlist > #slist-li-username').sortable('option', 'containment', '#vlist'); }); And as for the HTML, I'll upload it to here (since StackOverflow seems to break when I paste it in here - even in code mode): http://sikosoft.net/jquery-sort-connect.html Any help would greatly be appreciated! :) Oh, and be gentle as this is my first question here. ;)

  Read the article

• Bulk inserts into sqlite db on the iphone...

  - by akaii

  I'm inserting a batch of 100 records, each containing a dictonary containing arbitrarily long HTML strings, and by god, it's slow. On the iphone, the runloop is blocking for several seconds during this transaction. Is my only recourse to use another thread? I'm already using several for acquiring data from HTTP servers, and the sqlite documentation explicitly discourages threading with the database, even though it's supposed to be thread-safe... Is there something I'm doing extremely wrong that if fixed, would drastically reduce the time it takes to complete the whole operation? NSString* statement; statement = @"BEGIN EXCLUSIVE TRANSACTION"; sqlite3_stmt *beginStatement; if (sqlite3_prepare_v2(database, [statement UTF8String], -1, &beginStatement, NULL) != SQLITE_OK) { printf("db error: %s\n", sqlite3_errmsg(database)); return; } if (sqlite3_step(beginStatement) != SQLITE_DONE) { sqlite3_finalize(beginStatement); printf("db error: %s\n", sqlite3_errmsg(database)); return; } NSTimeInterval timestampB = [[NSDate date] timeIntervalSince1970]; statement = @"INSERT OR REPLACE INTO item (hash, tag, owner, timestamp, dictionary) VALUES (?, ?, ?, ?, ?)"; sqlite3_stmt *compiledStatement; if(sqlite3_prepare_v2(database, [statement UTF8String], -1, &compiledStatement, NULL) == SQLITE_OK) { for(int i = 0; i < [items count]; i++){ NSMutableDictionary* item = [items objectAtIndex:i]; NSString* tag = [item objectForKey:@"id"]; NSInteger hash = [[NSString stringWithFormat:@"%@%@", tag, ownerID] hash]; NSInteger timestamp = [[item objectForKey:@"updated"] intValue]; NSData *dictionary = [NSKeyedArchiver archivedDataWithRootObject:item]; sqlite3_bind_int( compiledStatement, 1, hash); sqlite3_bind_text( compiledStatement, 2, [tag UTF8String], -1, SQLITE_TRANSIENT); sqlite3_bind_text( compiledStatement, 3, [ownerID UTF8String], -1, SQLITE_TRANSIENT); sqlite3_bind_int( compiledStatement, 4, timestamp); sqlite3_bind_blob( compiledStatement, 5, [dictionary bytes], [dictionary length], SQLITE_TRANSIENT); while(YES){ NSInteger result = sqlite3_step(compiledStatement); if(result == SQLITE_DONE){ break; } else if(result != SQLITE_BUSY){ printf("db error: %s\n", sqlite3_errmsg(database)); break; } } sqlite3_reset(compiledStatement); } timestampB = [[NSDate date] timeIntervalSince1970] - timestampB; NSLog(@"Insert Time Taken: %f",timestampB); // COMMIT statement = @"COMMIT TRANSACTION"; sqlite3_stmt *commitStatement; if (sqlite3_prepare_v2(database, [statement UTF8String], -1, &commitStatement, NULL) != SQLITE_OK) { printf("db error: %s\n", sqlite3_errmsg(database)); } if (sqlite3_step(commitStatement) != SQLITE_DONE) { printf("db error: %s\n", sqlite3_errmsg(database)); } sqlite3_finalize(beginStatement); sqlite3_finalize(compiledStatement); sqlite3_finalize(commitStatement);

  Read the article

• Binary Search Help

  - by aloh

  Hi, for a project I need to implement a binary search. This binary search allows duplicates. I have to get all the index values that match my target. I've thought about doing it this way if a duplicate is found to be in the middle: Target = G Say there is this following sorted array: B, D, E, F, G, G, G, G, G, G, Q, R S, S, Z I get the mid which is 7. Since there are target matches on both sides, and I need all the target matches, I thought a good way to get all would be to check mid + 1 if it is the same value. If it is, keep moving mid to the right until it isn't. So, it would turn out like this: B, D, E, F, G, G, G, G, G, G (MID), Q, R S, S, Z Then I would count from 0 to mid to count up the target matches and store their indexes into an array and return it. That was how I was thinking of doing it if the mid was a match and the duplicate happened to be in the mid the first time and on both sides of the array. Now, what if it isn't a match the first time? For example: B, D, E, F, G, G, J, K, L, O, Q, R, S, S, Z Then as normal, it would grab the mid, then call binary search from first to mid-1. B, D, E, F, G, G, J Since G is greater than F, call binary search from mid+1 to last. G, G, J. The mid is a match. Since it is a match, search from mid+1 to last through a for loop and count up the number of matches and store the match indexes into an array and return. Is this a good way for the binary search to grab all duplicates? Please let me know if you see problems in my algorithm and hints/suggestions if any. The only problem I see is that if all the matches were my target, I would basically be searching the whole array but then again, if that were the case I still would need to get all the duplicates. Thank you BTW, my instructor said we cannot use Vectors, Hash or anything else. He wants us to stay on the array level and get used to using them and manipulating them.

  Read the article

• ASP.NET Web Service - how to handle special characters in strings?

  - by Vlorg

  To show this fundamental issue in .NET and the reason for this question, I have written a simple test web service with one method (EditString), and a consumer console app that calls it. They are both standard web service/console applications created via File/New Project, etc., so I won't list the whole code - just the methods in question: Web method: [WebMethod] public string EditString(string s, bool useSpecial) { return s + (useSpecial ? ((char)19).ToString() : ""); } [You can see it simply returns the string s if useSpecial is false. If useSpecial is true, it returns s + char 19.] Console app: TestService.Service1 service = new SCTestConsumer.TestService.Service1(); string response1 = service.EditString("hello", false); Console.WriteLine(response1); string response2 = service.EditString("hello", true); // fails! Console.WriteLine(response2); [The second response fails, because the method returns hello + a special character (ascii code 19 for argument's sake).] The error is: There is an error in XML document (1, 287) Inner exception: "'', hexadecimal value 0x13, is an invalid character. Line 1, position 287." A few points worth mentioning: The web method itself WORKS FINE when browsing directly to the ASMX file (e.g. http://localhost:2065/service1.asmx), and running the method through this (with the same parameters as in the console application) - i.e. displays XML with the string hello + char 19. Checking the serialized XML in other ways shows the special character is being encoded properly (the SERVER SIDE seems to be ok which is GOOD) So it seems the CLIENT SIDE has the issue - i.e. the .NET generated proxy class code doesn't handle special characters This is part of a bigger project where objects are passed in and out of the web methods - that contain string attributes - these are what need to work properly. i.e. we're de/serializing classes. Any suggestions for a workaround and how to implement it? Or have I completely missed something really obvious!!? Thanks in advance... PS. I've not had much luck with getting it to use CDATA tags (does .NET support these out of the box?).

  Read the article

• Having trouble getting MEF imports to be resolved

  - by Dave

  This is sort of a continuation of one of my earlier posts, which involves the resolving of modules in my WPF application. This question is specifically related to the effect of interdependencies of modules and the method of constructing those modules (i.e. via MEF or through new) on MEF's ability to resolve relationships. First of all, here is a simple UML diagram of my test application: I have tried two approaches: left approach: the App implements IError right approach: the App has a member that implements IError Left approach My code behind looked like this (just the MEF-related stuff): // app.cs [Export(typeof(IError))] public partial class Window1 : Window, IError { [Import] public CandyCo.Shared.LibraryInterfaces.IPlugin Plugin { get; set; } [Export] public CandyCo.Shared.LibraryInterfaces.ICandySettings Settings { get; set; } private ICandySettings Settings; public Window1() { // I create the preferences here with new, instead of using MEF. I wonder // if that's my whole problem? If I use MEF, and want to have parameters // going to the constructor, then do I have to [Export] a POCO (i.e. string)? Settings = new CandySettings( "Settings", @"c:\settings.xml"); var catalog = new DirectoryCatalog( "."); var container = new CompositionContainer( catalog); try { container.ComposeParts( this); } catch( CompositionException ex) { foreach( CompositionError e in ex.Errors) { string description = e.Description; string details = e.Exception.Message; } throw; } } } // plugin.cs [Export(typeof(IPlugin))] public class Plugin : IPlugin { [Import] public CandyCo.Shared.LibraryInterfaces.ICandySettings CandySettings { get; set; } [Import] public CandyCo.Shared.LibraryInterfaces.IError ErrorInterface { get; set; } [ImportingConstructor] public Plugin( ICandySettings candy_settings, IError error_interface) { CandySettings = candy_settings; ErrorInterface = error_interface; } } // candysettings.cs [Export(typeof(ICandySettings))] public class CandySettings : ICandySettings { ... } Right-side approach Basically the same as the left-side approach, except that I created a class that inherits from IError in the same assembly as Window1. I then used an [Import] to try to get MEF to resolve that for me. Can anyone explain how the two ways I have approached MEF here are flawed? I have been in the dark for so long that instead of reading about MEF and trying different suggestions, I've added MEF to my solution and am stepping into the code. The part where it looks like it fails is when it calls partManager.GetSavedImport(). For some reason, the importCache is null, which I don't understand. All the way up to this point, it's been looking at the part (Window1) and trying to resolve two imported interfaces -- IError and IPlugin. I would have expected it to enter code that looks at other assemblies in the same executable folder, and then check it for exports so that it knows how to resolve the imports...

  Read the article

• Problem with PHP 'PHP_SELF'

  - by shinjuo

  I am having a bit of trouble. It does not seem to be a big deal, but I have created a page that the user can edit a MySQL database. Once they click submit it should process the php within the if statement and echo 1 record updated. The problem is that it does not wait to echo the statement. It just seems to ignore the way I wrote my if and display the whole page. Can anyone see where I went wrong. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title></title> </head> <body> <form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="post"> <?php require("serverInfo.php"); ?> <?php $res = mysql_query("SELECT * FROM cardLists order by cardID") or die(mysql_error()); echo "<select name = 'Cards'>"; while($row=mysql_fetch_assoc($res)) { echo "<option value=\"$row[cardID]\">$row[cardID]</option>"; } echo "</select>"; ?> Amount to Add: <input type="text" name="Add" /> <input type="submit" /> </form> <?php if(isset($_POST['submit'])); { require("serverInfo.php"); mysql_query("UPDATE `cardLists` SET `AmountLeft` = `AmountLeft` + ".mysql_real_escape_string($_POST['Add'])." WHERE `cardID` = '".mysql_real_escape_string($_POST['Cards'])."'"); mysql_close($link); echo "1 record Updated"; } ?> <br /> <a href="index.php"> <input type="submit" name="main" id="main" value="Return To Main" /></a> </body> </html>

  Read the article

• Possible to use Python with Intel's Atom Developer SDK (C/C++)?

  - by Jordan Magnuson

  So I've made a game in Python and PyGame. Now I'm interested in submitting the game to Intel's March Developer Challenge. However, the developer challenge requires use of Intel's Atom Developer SDK (http://appdeveloper.intel.com/en-us/sdk), which only has API's for C and C++. I'm new to Python and PyGame, and have no experience in C or C++. My question is, would it be possible to somehow implement Intel's Atom SDK through/with/from a Python application (as the first link above suggests)? I've read up a little bit on embedding/extending Python into/with C, but I'm not entirely sure what to embed or where. I mean, I know I can do things like this in C: #include <Python.h> int main(int argc, char *argv[]) { Py_Initialize(); PyRun_SimpleString("from time import time,ctime\n" "print 'Today is',ctime(time())\n"); Py_Finalize(); return 0; } But what do I do about all my dependencies on Python and Pygame, for people that don't have those installed on their machines? Normally Py2Exe takes care of compacting the required dependencies (I've managed to package my game into an exe/zip), but how do I take care of that stuff in the context of embedding within C? Can I somehow work with py2exe on this, or do I need to do something entirely different for embedding within C? It seems like it would be a lot easier to go the route of extending Python with the C validation code, rather than trying to embed my whole game within C, but I think that's not an option, "because the library provided is currently only available as a Visual Studio 2008 '.lib'", meaning the application has to be compiled with Visual Studio...? Any help, thoughts, or ideas are much appreciated! You can find the complete SDK Developer's Guide on the intel site above, but here is their "Hello World" using the C Language API: #include <stdio.h> #include “adpcore.h” int main( int argc, char* argv[] ) { ADP_RET_CODE ret_code; const ADP_APPLICATIONID myApplicationID = {{ 0x12345678,0x11112222,0x33331234,0x567890ab}}; if ((ret_code = ADP_Initialize()) != ADP_SUCCESS ){ printf( “ERROR: exiting” ); exit( -1 ); } if (( ret_code = ADP_IsAuthorized( myApplicationId )) == ADP_AUTHORIZED ) printf( “Hello World” ); else printf( “Not authorized to run” ); exit 0; } 35 Page SDK Developer Guide: http:// appdeveloper.intel.com/sites/files/pages/SDK%20Developer%20Guide.pdf

  Read the article

• ROW_NUMBER() VS. DISTINCT

  - by ramadan2050

  Dear All, I have a problem with ROW_NUMBER() , if i used it with DISTINCT in the following Query I have 2 scenarios: 1- run this query direct : give me for example 400 record as a result 2- uncomment a line which start with [--Uncomment1--] : give me 700 record as a result it duplicated some records not all the records what I want is to solve this problem or to find any way to show a row counter beside each row, to make a [where rownumber between 1 and 30] --Uncomment2-- if I put the whole query in a table, and then filter it , it is work but it still so slow waiting for any feedback and I will appreciate that Thanks in advance SELECT * FROM (SELECT Distinct CRSTask.ID AS TaskID, CRSTask.WFLTaskID, --Uncomment1-- ROW_NUMBER() OVER (ORDER By CRSTask.CreateDate asc ) AS RowNum , CRSTask.WFLStatus AS Task_WFLStatus, CRSTask.Name AS StepName, CRSTask.ModifiedDate AS Task_ModifyDate, CRSTask.SendingDate AS Task_SendingDate, CRSTask.ReceiveDate AS Task_ReceiveDate, CRSTask.CreateDate AS Task_CreateDate, CRS_Task_Recipient_Vw.Task_CurrentSenderName, CRS_Task_Recipient_Vw.Task_SenderName, CRS_INFO.ID AS CRS_ID, CRS_INFO.ReferenceNumber, CRS_INFO.CRSBeneficiaries, CRS_INFO.BarCodeNumber, ISNULL(dbo.CRS_FNC_GetTaskReceiver(CRSTask.ID), '') + ' ' + ISNULL (CRS_Organization.ArName, '') AS OrgName, CRS_Info.IncidentID, COALESCE(CRS_Subject.ArSubject, '??? ????') AS ArSubject, COALESCE(CRS_INFO.Subject, 'Blank Subject') AS CRS_Subject, CRS_INFO.Mode, CRS_Task_Recipient_Vw.ReceiverID, CRS_Task_Recipient_Vw.ReceiverType, CRS_Task_Recipient_Vw.CC, Temp_Portal_Users_View.ID AS CRS_LockedByID, Temp_Portal_Users_View.ArabicName AS CRS_LockedByName, CRSDraft.ID AS DraftID, CRSDraft.Type AS DraftType, CASE WHEN CRS_Folder = 1 THEN Task_SenderName WHEN CRS_Folder = 2 THEN Task_SenderName WHEN CRS_Folder = 3 THEN Task_CurrentSenderName END AS SenderName, CRS_Task_Folder_Vw.CRS_Folder, CRS_INFO.Status, CRS_INFO.CRS_Type, CRS_Type.arName AS CRS_Type_Name FROM CRS_Task_Folder_Vw LEFT OUTER JOIN CRSTask ON CRSTask.ID = CRS_Task_Folder_Vw.TaskID LEFT OUTER JOIN CRS_INFO ON CRS_INFO.ID = CRSTask.CRSID LEFT OUTER JOIN CRS_Subject ON COALESCE( SUBSTRING( CRS_INFO.Subject, CHARINDEX('_', CRS_INFO.Subject) + 1, LEN(CRS_INFO.Subject) ), 'Blank Subject' ) = CRS_Subject.ID LEFT OUTER JOIN CRSInfoAttribute ON CRS_INFO.ID = CRSInfoAttribute.ID LEFT OUTER JOIN CRS_Organization ON CRS_Organization.ID = CRSInfoAttribute.SourceID LEFT OUTER JOIN CRS_Type ON CRS_INFO.CRS_Type = CRS_Type.ID LEFT OUTER JOIN CRS_Way ON CRS_INFO.CRS_Send_Way = CRS_Way.ID LEFT OUTER JOIN CRS_Priority ON CRS_INFO.CRS_Priority_ID = CRS_Priority.ID LEFT OUTER JOIN CRS_SecurityLevel ON CRS_INFO.SecurityLevelID = CRS_SecurityLevel.ID LEFT OUTER JOIN Portal_Users_View ON Portal_Users_View.ID = CRS_INFO.CRS_Initiator LEFT OUTER JOIN AD_DOC_TBL ON CRS_INFO.DocumentID = AD_DOC_TBL.ID LEFT OUTER JOIN CRSTask AS Temp_CRSTask ON CRSTask.ParentTask = Temp_CRSTask.ID LEFT OUTER JOIN Portal_Users_View AS Temp_Portal_Users_View ON Temp_Portal_Users_View.ID = AD_DOC_TBL.Lock_User_ID LEFT OUTER JOIN Portal_Users_View AS Temp1_Portal_Users_View ON Temp1_Portal_Users_View.ID = CRS_INFO.ClosedBy LEFT OUTER JOIN CRSDraft ON CRSTask.ID = CRSDraft.TaskID LEFT OUTER JOIN CRS_Task_Recipient_Vw ON CRSTask.ID = CRS_Task_Recipient_Vw.TaskID --LEFT OUTER JOIN CRSTaskReceiverUsers ON CRSTask.ID = CRSTaskReceiverUsers.CRSTaskID AND CRS_Task_Recipient_Vw.ReceiverID = CRSTaskReceiverUsers.ReceiverID LEFT OUTER JOIN CRSTaskReceiverUserProfile ON CRSTask.ID = CRSTaskReceiverUserProfile.TaskID WHERE Crs_Info.SUBJECT <> 'Blank Subject' AND (CRS_INFO.Subject NOT LIKE '%null%') AND CRS_Info.IsDeleted <> 1 /* AND CRSTask.WFLStatus <> 6 AND CRSTask.WFLStatus <> 8 */ AND ( ( CRS_Task_Recipient_Vw.ReceiverID IN (1, 29) AND CRS_Task_Recipient_Vw.ReceiverType IN (1, 3, 4) ) ) AND 1 = 1 )Codes --Uncomment2-- WHERE Codes.RowNum BETWEEN 1 AND 30 ORDER BY Codes.Task_CreateDate ASC

  Read the article

• What is the relationship between WebProxy & IWebProxy with respect to WebClient?

  - by Streamline

  I am creating an app (.NET 2.0) that uses WebClient to connect (downloaddata, etc) to/from a http web service. I am adding a form now to handle allowing proxy information to either be stored or set to use the defaults. I am a little confused about some things. First, some of the methods & properties available in either WebProxy or IWebProxy are not in both. What is the difference here with respect to setting up how WebClient will be have when it is called? Secondly, do I have to tell WebClient to use the proxy information if I set it using either WebProxy or IWebProxy class elsewhere? Or is it automatically inherited? Thirdly, when giving the option for the user to use the default proxy (whatever is set in IE) and using the default credentials (I assume also whatever is set in IE) are these two mutually exclusive? Or you only use default credentials when you have also used default proxy? This gets me to the whole difference between WebProxy and IWebProxy. WebRequest.DefaultProxy is a IWebPRoxy class but UseDefaultCredentials is not a method on the IWebProxy class, rather it is only on WebProxy and in turn, How to set the proxy to the WebRequest.DefautlProxy if they are two different classes? Here is my current method to read the stored form settings by the user - but I am not sure if this is correct, not enough, overkill, or just wrong because of the mix of WebProxy and IWebProxy: private WebProxy _proxyInfo = new WebProxy(); private WebProxy SetProxyInfo() { if (UseProxy) { if (UseIEProxy) { // is doing this enough to set this as default for WebClient? IWebProxy iProxy = WebRequest.DefaultWebProxy; if (UseIEProxyCredentials) { _proxyInfo.UseDefaultCredentials = true; } else { // is doing this enough to set this as default credentials for WebClient? WebRequest.DefaultWebProxy.Credentials = new NetworkCredential(ProxyUsername, ProxyPassword); } } else { // is doing this enough to set this as default for WebClient? WebRequest.DefaultWebProxy = new WebProxy(ProxyAddress, ParseLib.StringToInt(ProxyPort)); if (UseIEProxyCredentials) { _proxyInfo.UseDefaultCredentials = true; } else { WebRequest.DefaultWebProxy.Credentials = new NetworkCredential(ProxyUsername, ProxyPassword); } } } // Do I need to WebClient to absorb this returned proxy info if I didn't set or use defaults? return _proxyInfo; } Is there any reason to not just scrap storing app specific proxy information and only allow the app the ability to use the default proxy information & credentials for the logged in user? Will this ever not be enough if using HTTP? Part 2 Question: How can I test that the WebClient instance is using the proxy information or not?

  Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >