Search Results

Search found 14882 results on 596 pages for 'xfce4 power manager'.

Page 334/596 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

• Why doesn't my Droid phone charge when connected to a powered USB hub that is not connected to my computer?

  - by pkaeding

  I notice that my new Motorola Droid phone charges perfectly fine when I connect it to my computer via the USB cable, or if I connect it to a car cigarette lighter-USB adapter, or a wall power-USB adapter. It also works fine when I connect it to a powered USB hub that is connected to my computer. However, if that same powered USB hub is not connected to my computer when I connect the phone, it does not charge. If I connect the computer to the hub, and then connect the phone to the hub, it will charge. If I then disconnect the computer from the hub, the phone will continue to charge. Does anyone know why this is happening, or what I can do to be able to charge my phone from a powered hub, without my computer being present?

  Read the article

• windows vms unpredictibly require login

  - by marrrkus

  I have a cluster of vms on a number of cloned servers using libvirt/qemu. Occassionally the windows 7 vms randomly require a login screen, even though I've done everything I can think of and can google to turn off a login screen. I've used netplwiz to turn off requiring a password (http://pcsupport.about.com/od/windows7/ht/auto-logon-windows-7.htm) manually changed the regsistry using the instructions here: http://superuser.com/a/28654 changed requiring a password in the power saving settings in the control panel if the screen goes to sleep told the screen to never go to sleep (in the control panel) Even with all of these things, some of the vms *still* randomly require a login. I have no idea what else to try. Any ideas??

  Read the article

• Multiple servers acting like a single one with all the hardware?

  - by marc.riera

  Hello, by now I have 10 servers for hpc, power computing oriented. My users need to launch several processes using qmake. The users are used to work with ubuntu 9.10, and the software from the repositories is switable for them. I've deployed ubuntu 9.10 to all 10 servers (pxe rocks). By now we work with parallel-ssh and cluster-ssh, which allows as to launch the same process to all servers. With this tools this tools the servers remain as independent but with the same software and the same launched command. Now we would like to go to next step and see all the servers as a single one with all the resources from the other 9 as if was its resources. The difference would be substantial in time to process and also time to design the command to launch. Any advice on wich software to use will be very useful? Thanks

  Read the article

• Scripts under pm/sleep.d are not getting called when suspending with KDE 4.3

  - by Richard Corden

  Fujitsu-Siemens H240, Slackware-current, KDE 4.3.2. I would like to perform some additional steps when my laptop suspends. I found this SU question which is very close to what I am asking, however the scripts that I placed in that directory are not being called for me. This could be a Slackware thing, or its possible that KDE has a different location for these scripts. I am suspending by using the "Suspend" radio button on the "Guidance Power Manager" dialog of KDE. Is there a standard location where I can place my scripts so they'll be run before and then after the machine has suspended?

  Read the article

• Unmounted root partition

  - by Jack

  My server running Debian lenny has just had a power cut recently and its come back up with the root partition in read only mode. I tried to remount the filesystem in read write mode with mount -n -o remount,rw / which then gave the output mount: block device /dev/hda1 is write-protected, mounting read-only. But now the root filesystem isn't mounted at all so I can't run anything to mount the partition again or any other command for that matter such as shutdown because /bin/ isn't there. Is there anything I can do remotely?

  Read the article

• Free-flow Alternative to Powerpoint?

  - by Nick Klauer

  So I've been digging around the net trying to find a good set of alternatives to Powerpoint. Part of my interest is that I found one, Prezi, that I liked for it's free-form style. Part of the power of it was that I can zoom out and select any part of the presentation to continue from and it feels much like a mind map or association of thoughts. Are there any other tools that offer anything similar in vein to this way of presenting material? I'm looking for something that just pops differently than a death-by-powerpoint-style presentation, so I would be happy to find tools that help present information in more fluid styles. It doesn't have to mirror Prezi, and I wouldn't want that, but after seeing what Prezi does, I have to think there are other ways of presenting information to a group of people than one square slide at a time.

  Read the article

• MacBook says to replace battery. Should I?

  - by Palantir

  Hi! My MacBook says that battery is not charging, and the battery is completely empty (in fact, pressing the button on the battery illuminates no LEDs). If I plug the power adapter off the mac shuts off immediately. I tried with a spare adapter, and it won't charge it. System information says it has 380 cycles. The battery is 2.5 years old. System profiler says the battery has 0 mAh of capacity, and that it should be replaced. Should I just buy a new battery, or should I bring it to an apple point, and leave it there? They can take a look at it (it's on AppleCare), they told me that they will repair it is there is anything wrong with the charging circuit, but they won't give me a new battery. They will keep the laptop for 10 working days at least... I hate when this happens :P

  Read the article

• Mint Linux - Downgrade Java to 1.5

  - by Chrisc

  Hello, Currently, I am running Mint Linux (Release 9). I need to downgrade Java from version 1.6 to 1.5, and have been trying to figure out how to go about this. So far, I've had no luck. The package manager doesn't seem to have it. Does anyone have any suggestions? Thanks, - Chris

  Read the article

• Printer Problems: Snow Leopard with Epson CX 4200 - worked and then didn't?

  - by user33521

  We got a new laptop in the office with Snow Leopard. We installed the new driver for the Epson CX 4200 printer we have and it seemed to be working okay. However, after an Apple update, the printer stopped working. A few days later we saw an update for the Epson driver and so we downloaded and installed that. However, the printer still isn't working. We plugged and unplugged the printer power cable and usb cable, and also tried replacing the ink (because the colour ink light was blinking)...however the printer still isn't working?

  Read the article

• Visual studio 2010: cannot connect for any online resource

  - by KentZhou

  Visual studio 2010 Premium installed on Widnows 7: when try to connect for online gallery or online template, give me error like: Cannot search for online exensions because an error occured while trying to contact the server and ask me enable access to extensions on the vistual studio gallery .... It did enabled in Extension Manager Tools/Options page. Internet connection was fine. Can't know why. On another computer: Windows 7, VS2010 utilmate trail version: this was fine.

  Read the article

• NuGet Update Error?

  - by Myles McDonnell

  Using the NuGet package manager dialog at the solution level in the normal course of updating a package reference once the process is complete there is a green tick on the item and the update button disappears. However, with certain of my packages the update process completes, as far as I can tell successfully, but no green tick and the update button remains. Press it again and the next dialog shows that no projects require an update for that package. Am I missing something here or is this a bug?

  Read the article

• Juniper J4350 out of order

  - by Benjamin Baron

  I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

  Read the article

• FastMM and Dynamically loaded DLLs

  - by Vegar

  I have a host application, that loads a dozen of libraries at start up. I want to switch from Delphi 7s default memory manager to the full version of FastMM4 for better mem leak reporting. Should I include FastMM4 in the uses section of both the host application and the libraries? What about shared runtime packages? -Vegar

  Read the article

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• applicaion and local service lifetime

  - by rayman

  As i understoond, if we have local service of some application, as soon as the application goes down, the service goes down as well - is that true? and if it is, how can we make an application to run all the time without go down? (without using Alarm manager). i though that the purpose of local service is to answer this situation: " to make the application everlasting" please, if some1 could explain me this better, thanks, ray.

  Read the article

• Use router as external high powered Wi-Fi adapter

  - by skywinder

  I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

  Read the article

• SQL reporting services reference

  - by SonOfOmer

  Hi everyone, I want to add service reference to SQL reporting services on local machine. In Reporting Service Configuration Manager under Web Service URL tab I have report service URL exposed, I have tried to add web reference to project with that Web Reference URL, but it can not be found. Please tell me am I missing something or is this right way to to? Thanks a lot.

  Read the article

• Google Auth using Token

  - by Taranfx

  I've an android application that needs to navigate to a google service webpage (say calendar). Because I already have a Auth Token (using Android Accounts manager), I want to skip user being redirected to web login. Would auto-login be possible using authtoken ? If yes, what is the exact Url with params

  Read the article

• Battery backed write cache behavior upon disk change

  - by Halfgaar

  We use 3ware Inc 9650SE SATA-II RAID PCIe RAID controllers with battery backed write cache. Our spare hardware has the same controller. I was wondering; are these controllers smart enough not to sync the cache when the disks have been changed? For example, if I deploy one of those spare machines by putting in the disks of another machine and that spare machine still has pending writes, will it be smart enough not to perform those writes on the replaced array? Edit: my scenario is not really made clear, so let me give an example: server1 goes down because of power supply failure. I put the disks in server2 and start. I repair server1 I put the disks back from server2 in server1 (it's not relevant right now that in reality I would probably keep server2 running). If server1 doesn't have safeguards, it will write to the array, thinking it's simply powering up again, corrupting it.

  Read the article

• Tracking down random BSOD on windows 7

  - by pehrs

  I have gotten a computer running windows 7 handed to me that randomly, several times a day, bsods with a PAGE_FAULT_IN_NONPAGED_AREA (50) or WHEA_UNCORRECTABLE_ERROR (124). Crashes happens regardless of load. I am running out of ideas for how to track this down. Analyzing the minidumps shows the crash to be in ntkrnlmp.exe/WMIADAP.exe System has plenty of power (600w) Ram checks out fine using memtest86+ over a weekend. System is clean inside. No dust build up. Temperatures stay low. As far as I know (and reliability history shows) no new drivers were installed for several months before the problems started. All drivers are now up to date. sfc /scannow reports the system as clean. CHKDSK reports the disks as clean Removing the AV (Avast) has no effect. Any more things that should be tried on windows 7 before I start replacing the hardware?

  Read the article

• Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

  - by Lloyd Watkin

  I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

  Read the article

• Tomcat session stickiness in session replication

  - by rabbit

  Hi, I am having a 2 instance load balanced and session replicated tomcat 6.0.20 cluster. Should sticky_session be set to true or false for in memory session replication. http://tomcat.apache.org/connectors-doc/reference/workers.html mentions : Set sticky_session to False when Tomcat is using a Session Manager which can persist session data across multiple instances of Tomcat. where as /tomcat-6.0-doc/cluster-howto.html (Cluster Basics) mentions : Make sure that your loadbalancer is configured for sticky session mode.

  Read the article

• How can I keep one specific article always on top on the front page?

  - by dmr

  On my joomla website, I'd like to have a "about our company" article always be the first article on the front page. I want the other articles to shift down in position as new articles are added, but to keep the "about our company" one constantly on top. I tried setting the order of that article on the front page manager to -1, but it still shifted down when I added a new article. Any ideas?

  Read the article

• difference between project management and process management

  What is the difference between project management and process management? Similar to this question: http://stackoverflow.com/questions/23509/what-is-the-difference-between-project-leader-and-project-manager

  Read the article

• Preventing a RichTextBox operation from being added to the control's Undo stack

  - by shadeMe

  Editing a RichTextBox control's text (more specifically, modifying selection font/color) programmatically seems to be tracked in the control's built in undo stack. Is there a way, short of writing my own undo/redo manager, to prevent certain actions/operations from being added to the undo stack ?

  Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >