Search Results

Search found 61414 results on 2457 pages for 'daylight saving time'.

Page 335/2457 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >

• cdrom redirection fails on ILOM for Sun x4600 M2

  - by aculich

  We have been able to successfully redirect the ILOM on this x4600 M2 in the past, but for some reason now we are getting an error that says "CD-ROM image redirection failed to start": We have also launched the Storage Redirection service and that doesn't help. Launching it a second time to really make sure it's running shows that on the second time it can't bind to port 2121. We didn't get that message the first time, so I assume it is now listening (even though a scan with nmap doesn't show it listening. We are using ILOM firmware version: 3.0.3.31

  Read the article

• Spikes of 99% disk activity in Windows 8 Task Manager

  - by Jonathan Chan

  For some reason Windows 8's Task Manager reports spikes of 99% disk activity for hours at a time. Looking at the entries in that column, however, data doesn't seem to be getting written any more quickly than when the disk activity is around 25-50% (which it seem to idle at most of the time). Furthermore, when these 99% disk activity spikes are happening, the average response time reported in the Performance tab becomes 4000-6000ms. Is there a good way to find out what is causing the disk activity? I've tried using Process Explorer, but I said above, the rate at which data is reportedly being written doesn't seem to correspond (Dropbox and Google Chrome are constantly the top two, but the spikes are not dependent on their being open). Thanks in advance for any help. It gets very annoying when the computer stutters to a halt.

  Read the article

• Redhat Software RAID 1 not syncing

  - by hamstar

  Hey guys, I setup a software RAID 1 on a Redhat server, everything went sweet and it synced the first time. The other day the raid failedover for some reason and the disks hadn't been syncing since that first time, so it went back to 2 weeks ago when we did the first sync. We got the system back up running off the master only. However what would cause the software raid to not sync? I used mdadm to setup the RAID. Any ideas? EDIT: Sorry I don't have the output from /proc/mdstat before the raid failedover, it is now running on only the master... I can put the slave back in no problems but I was wondering how to make it sync all the time instead of only when I add it.

  Read the article

• Sage 50 Accounts 2010 wont run on windows 7

  - by admintech

  I have sucessfuly installed Sage 50 Accounts 2010 onto my 32 bit Windows 7 machine, yet whenever i try to run it i encounter - Log Name: Application Source: Application Error Date: 24/05/2010 17:14:13 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: LukeThomas-PC.domain.co.uk Description: Faulting application name: Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe, version: 2.0.0.91, time stamp: 0x4a8c22fe Faulting module name: igdumd32.dll, version: 8.15.10.1872, time stamp: 0x4a848a05 Exception code: 0xc0000409 Fault offset: 0x00012f96 Faulting process id: 0x1778 Faulting application start time: 0x01cafb5c2493b609 Faulting application path: C:\Program Files\Common Files\Sage SBD\Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe Faulting module path: C:\Windows\system32\igdumd32.dll Report Id: 63e2246b-674f-11df-96ba-002564c97988 Event Xml: 1000 2 100 0x80000000000000 5062 Application LukeThomas-PC.domain.co.uk Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe 2.0.0.91 4a8c22fe igdumd32.dll 8.15.10.1872 4a848a05 c0000409 00012f96 1778 01cafb5c2493b609 C:\Program Files\Common Files\Sage SBD\Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe C:\Windows\system32\igdumd32.dll 63e2246b-674f-11df-96ba-002564c97988 Any help would be appreciated as i cant find anything about this error

  Read the article

• Windows update error: Code 80072F8F (possibly datetime-not-correct, but it is)

  - by Andrew

  I have a Windows 2008 Server 64bit installation running as a virtual instance with a hosting provider. Windows Update has worked fine until IE8 (along with some other updates) managed to get installed (don't get me started). Now all of a sudden Windows Update fails to run and complains with error 80072F8F. UPDATE: I've since removed IE8 and am still having issues (tissues are on order) This apparently means that the time/timezone of the server is incorrect - which is not the case. I've synced the time with a time server and rebooted a number of times. I've followed the instructions here (http://support.microsoft.com/kb/929458) to no avail. Thanks! Andrew

  Read the article

• Linux software raid fails to include one device for one RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

  Read the article

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• how to open multiple projects into the CAST IRON integration tool?

  - by MIshal Shah

  Hi, I am learning the cast iron tool (http://www.castiron.com/) which is widely used now a days for integration purpose,but i can only open 1 project and if i want to open the other project at the same time than i have to close the 1st project and after that able to open the 2nd project. So many times i have to open 2 projects at the same time but i dont know in which way i can open the projects ? can any body give me any urgent solution for the same to open the multiple projects at the same time and to switch between them ? Thanks, Mishal Shah

  Read the article

• Rails3 environment running very slow on Windows XP, Ubuntu 9.04, Ubuntu 9.10

  - by bergyman

  I've tried all three (granted the Ubuntu versions were via VirtualBox with XP as a host, but I gave the images all the available RAM my system has). Loading the rails environment is taking 30-60 seconds. rails console, rake test:units - anything that requires rails to load up. And not just on the first go - every time. I've even used autotest to see if it helps with execution time for unit tests, but it doesn't. Any time I change one test, it still takes 30 seconds to load them, and then about 4 seconds to execute. Has anyone else come across this issue? Has anyone figured out any way to fix this?

  Read the article

• SQL Server 2005, Sudden increase of connections - SharePoint 2007

  - by CrazyNick

  We observed that sudden increase of SQL connections during a specific hour, it is a backend of a SharePoint 2007 Farm. From SharePoint 2007 Perspective: 1. Incremental crawling is scheduled at that time and few of the Timer jobs (normal timer jobs) are scheduled to run every mins / per 10mins. 2. Number of user requests are less. From SQL Server 2005 Perspective: 1. Transaction log backup is scheduled at that time 2. No other scheduled jobs are running at that time. so, how to narrow down the issue, what would be causing the sudden SQL connection increase?

  Read the article

• SQL Server 2005, Sudden increase of connections - SharePoint 2007

  - by CrazyNick

  We observed that sudden increase of SQL connections during a specific hour, it is a backend of a SharePoint 2007 Farm. From SharePoint 2007 Perspective: 1. Incremental crawling is scheduled at that time and few of the Timer jobs (normal timer jobs) are scheduled to run every mins / per 10mins. 2. Number of user requests are less. From SQL Server 2005 Perspective: 1. Transaction log backup is scheduled at that time 2. No other scheduled jobs are running at that time. so, how to narrow down the issue, what would be causing the sudden SQL connection increase?

  Read the article

• Windows performance monitor new instances

  - by fborozan

  Hi all, I am trying to configure performance monitor on 2003/2008R1&R2 to capture new instances of the counters without any luck. For example if I select counter Process\%Processor time (to monitor processor time per any instances of the process) everything works fine until I open or close any application. If in the meanwhile new application is open it will not be included in the monitoring processor, and old application instance will display zero for % processor time. The problem is performance monitor is not refreshing instances of the new applications/users/new terminal session/ or any other metrics that changes instances in the meanwhile. The solution is to stop/start log file, but I don't want to do that every sec and the logging will be split into two files. Anybody knows how do I accomplish to add all new instances? Any help greatly appreciated

  Read the article

• How to config Amazon Route53 working without www in sub-domain

  - by romuloigor

  edit: Amazon now supports this. http://aws.typepad.com/aws/2012/12/root-domain-website-hosting-for-amazon-s3.html I have my domain config in Route53 at Amazon AWS exec ping command in my domain without www $ ping gabster.com.br ping: cannot resolve gabster.com.br: Unknown host exec ping command in my domain with www $ ping www.gabster.com.br PING s3-website-sa-east-1.amazonaws.com (177.72.245.6): 56 data bytes 64 bytes from 177.72.245.6: icmp_seq=0 ttl=244 time=25.027 ms 64 bytes from 177.72.245.6: icmp_seq=1 ttl=244 time=25.238 ms 64 bytes from 177.72.245.6: icmp_seq=2 ttl=244 time=25.024 ms Route 53 - Create Record Set - Name: [ ].gabster.com.br Set CNAME value: www.gabster.com.br DISPLAY ERROR "RRSet of type CNAME with DNS name mydomin.com is not permitted at apex in zone mydomin.com"

  Read the article

• Windows Explorer keeps crashing in Windows 8.1

  - by Jonathan Allen

  This started a few days ago on a machine that has been running WIn 8.1 for over a month. I just finished a clean install of Windows 8.1 with a handful of apps like Dropbox and Office. Yet I'm still getting Windows Explorer crashes such as this: Faulting application name: Explorer.EXE, version: 6.3.9600.16408, time stamp: 0x523d251b Faulting module name: SHELL32.dll, version: 6.3.9600.16409, time stamp: 0x523fac81 Exception code: 0xc00000fd Fault offset: 0x0000000000189247 Faulting process id: 0xee8 Faulting application start time: 0x01ced2a62f6e5b2e Faulting application path: C:\WINDOWS\Explorer.EXE Faulting module path: C:\WINDOWS\system32\SHELL32.dll Report Id: e25c6b13-3eb4-11e3-be7a-2cd05a597b87 Faulting package full name: Faulting package-relative application ID: I assume that it is some sort of shell extension, but I don't know how to figure out which one.

  Read the article

• MySQL per-database replication?

  - by LucasBr

  So, my problem is interesting: we want to migrate from one server to another. We made a master-slave replication, but my boss came with the idea to make migration one database at a time. So he asked me to setup at the new server another MySQL instance, let the slave almost as-is and make the new instance be the new master incrementally, one database at a time. Is it possible, that is, can I transfer the database 'x' from old master to new master and just tell slave to synchronize 'x' at the new master from now on? I've read at this old thread ( Mysql Replication - are per-database threads possible? ) that this was not possible at that time. This can be done now? Thanks! Lucas Bracher.

  Read the article

• Share laptop's Wi-Fi with a LAN connection and a mobile device

  - by xperator

  OS: Windows 7 64bit I want to share my laptop's internet connection between my PC and my Android device. But I can only do one of them at a time. The laptop is connected to internet wirelessly. The PC is connected to the laptop using a Ethernet cable and internet is shared between them. I want to connect my mobile device to my laptop by making the laptop into a Wi-Fi hotspot. PC (Ethernet) == Laptop (connected to net by Wi-Fi) <== Mobile device (Wi-Fi hotspot) I have 3 connections in my laptop: Wireless Network Connection (internet - shared) Local area connection (PC) Wireless Network Connection 2 (Wi-Fi hotspot) Every time I have to disable either the LAN to get the Wi-Fi hotspot working, or disable the Wi-Fi hotspot to get LAN working. How can I share so I can use both at the same time?

  Read the article

• how to escape “@” in the username when logging in through FTPES with curl?

  - by user62367

  $ curl -T "index.html" -k --ftp-ssl -u "[email protected]" MYDOMAIN.COM Enter host password for user '[email protected]': % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 57173 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>405 Method Not Allowed</title> </head><body> <h1>Method Not Allowed</h1> <p>The requested method PUT is not allowed for the URL /index.html.</p> <hr> <address>Apache/2.2.16 Server at MYDOMAIN.COM Port 80</address> </body></html> 100 57480 100 307 100 57173 284 52902 0:00:01 0:00:01 --:--:-- 53633 can someone help me? Also posted on Stack Overflow

  Read the article

• AWS VPN Tunnel going down without traffic

  - by Asfura

  I managed to setup a site-to-site VPN connection from Amazon VPC to a company's network, and after a lot of configuration it was working fine, but now i realized that the VPN tunnel is DOWN every time there's no traffic going trough for a couple minutes. The only way that i have found to generate traffic is to reach the amazon instance from the company's network and then the tunnel goes up again. I had a cronjob doing ping every minute, but i think it should have a keepalive option somewhere, or at least a log file of the tunnels to find out what's going on. Any ideas to keep the tunnel up and/or bring it up from amazon? The firewall is a Checkpoint R75.20, it only allows one tunnel at a time for the same subnet, so i cant have both tunnels active. Thank you, any questions just ask. EDIT I forgot to add, the ping keepalive was working great (maybe generating a bit of traffic, but nothing to worry about), the connection dropped because i had to restart the instance, and it that little time it dropped me.

  Read the article

• What steps can you take to ensure sane build environments when compiling software?

  - by Chris Adams

  Hi guys, I've been stuck with a compilation problem when building a standardised virtual machine on CentOS 5.4, and I'm in the dark here as to a) why this error is occurring, and b) how to fix it, and in the hope that someone else stumbles across this problem too, I'm hoping someone can help me find the solution here. I'm getting a configure: error: newly created file is older than distributed files! error when trying to compile Ruby Enterprise like below when I try to run the installer, and the solutions offered to on the forums (of checking the tine, and touching the files to update the time associated with them) don't seem to be helping here. What steps can I take to work out what the cause of this problem? [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo ./installer Welcome to the Ruby Enterprise Edition installer This installer will help you install Ruby Enterprise Edition 1.8.7-2009.10. Don't worry, none of your system files will be touched if you don't want them to, so there is no risk that things will screw up. You can expect this from the installation process: 1. Ruby Enterprise Edition will be compiled and optimized for speed for this system. 2. Ruby on Rails will be installed for Ruby Enterprise Edition. 3. You will learn how to tell Phusion Passenger to use Ruby Enterprise Edition instead of regular Ruby. Press Enter to continue, or Ctrl-C to abort. Checking for required software... * C compiler... found at /usr/bin/gcc * C++ compiler... found at /usr/bin/g++ * The 'make' tool... found at /usr/bin/make * Zlib development headers... found * OpenSSL development headers... found * GNU Readline development headers... found -------------------------------------------- Target directory Where would you like to install Ruby Enterprise Edition to? (All Ruby Enterprise Edition files will be put inside that directory.) [/opt/ruby-enterprise] : -------------------------------------------- Compiling and optimizing the memory allocator for Ruby Enterprise Edition In the mean time, feel free to grab a cup of coffee. ./configure --prefix=/opt/ruby-enterprise --disable-dependency-tracking checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... configure: error: newly created file is older than distributed files! Check your system clock This is a virtual machine running on virtualbox, and the time of the host and the virtual machine are identical, and up to date. I've also tried running this after updating time with an ntp-client, so no avail. I tried this after reading this post here of someone having a similar problem [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ date Tue Apr 27 08:09:05 BST 2010 The other approach I've tried is to touch the top level the files in the build folder like suggested here, but this hasn't worked either (an to be honest, I'm not sure why it would have worked either) [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo touch ruby-enterprise-1.8.7-2009.10/* I'm not sure what I can do next here - the problem seems to be the bash configure script that returns this error error: newly created file is older than distributed files!, at line :2214 { echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi ### PROBLEM LINE #### # this line is the problem line - this is returned true, sometimes it isn't and I can't # see a pattern that that determines when this will test will pass or not. test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi the thing that makes this really frustrating is that this script works sometimes, when the VM has been running for an hour or so it works, but not at boot. There's nothing I see in the crontab that suggests any hourly tasks are run that might change the state of the system enough make a difference to this script working. I'm totally at a loss when it comes to debugging beyond here. What's the best approach to take here? Thanks

  Read the article

• network timeout how to analyse problem

  - by elhombre

  In the last three month I was experiencing that my internet connection started to get very slow and websites had long time to load. The first thing I made was an ping to www.google.com which showed that I was loosing pakets. Here some of the results: 64 bytes from 74.125.39.103: icmp_seq=2909 ttl=53 time=48.222 ms Request timeout for icmp_seq 2910 Request timeout for icmp_seq 2911 64 bytes from 74.125.39.103: icmp_seq=2912 ttl=53 time=44.372 ms Days later I had to reset my router because it wasn't able to establish a correct network connection. It was after the reset when things worked again for some days. But later the same network timeouts started to happen again. I would like to know how I can analyze the problem to get to the source which is causing this timeouts. Which steps do you take to circle in this Problem? My Network Laptop - Wireless Router modem - ISP EDIT: I am on a Mac OS X 10.6

  Read the article

• Remote Desktop Client Crashes following domain join

  - by Roberto Charlie Ciarleglio

  I recently joined my laptop to our windows domain and now the remote desktop client crashes when i try and connect to any machine. It works if I run as administrator but not ordinarily. The domain join migrated my local profile to the domain profile which i think is where the problem lies. I'm guessing its a permission thing as I had a similar problem with dropbox and had to delete reg keys and reinstall. I can't figure out how to fix this problem though. The event viewer shows this: Faulting application name: mstsc.exe, version: 6.1.7601.17514, time stamp: 0x4ce7ab44 Faulting module name: FACredProv2.dll, version: 2.4.95.1, time stamp: 0x4bb8d766 Exception code: 0xc0000005 Fault offset: 0x00000000000025b2 Faulting process id: 0xb24 Faulting application start time: 0x01cd43fbd3a81fba Faulting application path: C:\Windows\System32\mstsc.exe Faulting module path: C:\Windows\System32\FACredProv2.dll Report Id: 154ee55a-afef-11e1-a443-b8ac6f704c5d any help would be appreciated!

  Read the article

• PC reboots automatically in the begining

  - by user233508

  I have a AMD Phenom II 3GHz. 2 GB RAM system running on Windows 7. Off late my PC does not start properly I have to start it at least 7-8 times before it starts. It starts and then shuts down. Every time the time for which the system is up increases. After 7-8 attempts it starts an works fine. I have to give it a min between restarts (USB mouse light goes off). If I try restarting before this time the PC does not start. I am suspecting humidity playing some factor as this issue has started creeping up ever since the rains have started.

  Read the article

• Fast user switching is logging users off instead of switching users

  - by Nathan Osman

  I have a netbook running Windows 8.1 Pro that will no longer allow more than one user to be logged in at the same time. The steps necessary to reproduce this are as follows: The current user presses WIN to bring up the start screen. The user clicks his name in the corner and a list of other users appears. As soon as one of the other names is clicked, the user is unceremoniously logged off without any prompts. This behavior seems to have started some time after upgrading to Windows 8.1 from Windows 8. Before that point, everything worked fine and more than one user could be logged in at the same time. I've tried searching for others experiencing similar problems but this appears to be unique. System Details: CPU: Intel Atom N455 @ 1.66 GHz RAM: 1 GB OS: Windows 8.1 Pro w/ Media Center 32-bit

  Read the article

• What is the meaning of the two different recording icons used in Windows 7 Media Center?

  - by Lachlan Wetherall

  I am using Windows 7 Media Center with a digital TV tuner. If I am watching live TV and then use the mouse to bring up the control buttons at the bottom of the screen and press the record button once, then a single red circle 'recording' icon appears at the left side of the time slider. If I press the record button a second time, the 'recording' icon changes to a red circle with several shadowed circles fading off to the right. Pressing the record button a third time halts the recording. What is the meaning of the two different 'recording' icons?

  Read the article

• Rails3 environment running very slow on Windows XP, Ubuntu 9.04, Ubuntu 9.10

  - by bergyman

  I've tried all three (granted the Ubuntu versions were via VirtualBox with XP as a host, but I gave the images all the available RAM my system has). Loading the rails environment is taking 30-60 seconds. rails console, rake test:units - anything that requires rails to load up. And not just on the first go - every time. I've even used autotest to see if it helps with execution time for unit tests, but it doesn't. Any time I change one test, it still takes 30 seconds to load them, and then about 4 seconds to execute. Has anyone else come across this issue? Has anyone figured out any way to fix this?

  Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >