Search Results

Search found 61414 results on 2457 pages for 'daylight saving time'.

Page 338/2457 | < Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• dhcpd pool exhaustion - What's the result?

  - by jarmund

  I have a DHCP server that serves leases to several houndred, maybe up to a thousand, different clients on an average day. The pool consists of 242 IPs, and due to the highly dynamic nature of the network, it's enough 99% of the time (most devices are gone from the network in a few minutes), despite having a lease time of 3600. Now, imagine if more clients than that connect to the network during an hour. The sollution is obvious: Decrease lease time, or increase the DHCP pool, however, what i would like to know: What happens when dhcpd has exhausted the pool? Are new DHCP requests simply ignored?

  Read the article

• Recommended Setup

  - by Chris Ryan

  I have been running into issue with my MSSQL Database setup with speed. Here is my scenario. About 100M Rows Average: 1k Updates Per Second Hard Drives: RAID 10 SSD MDF --Active Time: 0 Log Drives: 1 SSD LDF - Simple Recovery --Active Time 99.9 --Queue: 8 I do not need a back up of the log so it is set to simple recovery but my bottleneck is still at my log. I get high WAITLOG times and thus it can not update any faster. I can't do bulk updates/transactions and each update needs to be one at a time. Is my only option to increase write performance of the log drives, add a RAID drives? Any suggestions on increasing the performance?

  Read the article

• 912 stream processor available in OpenCL

  - by tugrul büyükisik

  I am thinking of assembling this system: AMD CPU (A8-3870 APU which has Radeon HD 6550D inside: 400 stream processors:xxx GFLOPS) nearly 110$ AMD Graphics card: HD 7750 (512 stream processors:819 GFLOPS peak performance) nearly 170$ Appropriate ram (1600MHz bus) Mainboard What GFLOPS level can I reach as a stable mode with using OpenCL and similar programs? Can I use all 912 stream processors at the same time? I am not trying to do a VS question. I need to know what could be better for scientific computing (%75 of the time) and gaming (%25 of the time) because I have a low budget. With "scientific calculations" I mean fluid dynamics/solid state physics simulating; with games I mean those that need openCL and PhysX.

  Read the article

• SNMP keeps crashing

  - by jldugger

  We're using OpsView/Nagios to monitor our servers. We've added the SNMP service to all our servers and deployed the configuration via GPO, but one win2k3 server seems to have a problem; it crashes pretty regularly. The event log carries messages like: Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7034 Date: 6/11/2009 Time: 7:11:49 PM User: N/A Computer: HOSTNNAME Description: The SNMP Service service terminated unexpectedly. It has done this 2 time(s). and also Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 6/11/2009 Time: 7:11:18 PM User: N/A Computer: HOSTNAME Description: Faulting application snmp.exe, version 5.2.3790.3959, faulting module ntdll.dll, version 5.2.3790.3959, fault address 0x000417af. Now, I could probably set it to simply restart on crash in perpetuity, but I think it's better to fix problems like this. Is this a known problem? If not, what should I do to diagnose it?

  Read the article

• Removing past searches from Google Chrome's omnibar

  - by Ram Rachum

  One time I searched for Orange Juice in Chrome's Omnibar. Now, every time I start typing Orange, I get the search suggestion: How do I get Chrome to stop offering me this search suggestion? If I need to edit some config file, I can do that. Please don't post answers if you haven't ensured they work first. (This is intended to prevent people from answering "Press Shift-Delete.") Clarification: I'd prefer a solution in which I can selectively delete entries, not just by time segment. I also prefer a solution that does not involve cancelling any Chrome functionality.

  Read the article

• Planning to buy a server with at least 48GB Ram, are the blades way to go?

  - by varchar1

  We're planning to host our website for the first time for ourselves. We have currently have a linode of 8 gigs and the memory is going up to 90% most of the time. So I want to move my website to my own server with huge RAM. So this will be first time to manage any physical hardware of a server. So I came across IBM's BladeCenter, found them interesting. So can I just buy the blade and run it? Or do I have to buy the chassis for sure? Also, do I need to buy an UPS? So how hard is it to setup? How about the hard drives? Can I setup them easily? Please advice.

  Read the article

• Zabbix - Some of the monitored items dont get refreshd. how to find the reason?

  - by Niro

  I'm experiencing a strange issue with Zabbix monitoring a MySQL server. Most of the data from the server such as MySQL queries per second and MySQL uptime , Buffers memory etc. update nicely while some data like CPU iowait time (avg1) , Host local time ,MySQL number of threads and other items which were monitored in the past has last check time of about a week ago. I can't find any logic in this, for example Mysql number of threads and Mysql queries per second are obtained in a similar way so it does not make sense one of them is monitored and one is not. Please help- how can I fix this?

  Read the article

• Best Configuration for Performance - ffmpeg streaming / mp4 /flv

  - by Sam Alex

  I have some mpeg video files and a web page. A visitor comes to that web page and according to the selected options, a php script calls ffmpeg and combines the different mpeg files and then converts it to a mp4 file. That mp4 file is then shown to the visitor using flowplayer. The MP4 creation takes some time and flowplayer takes some time to load the file. What do you think is the best way to accomplish this task ? Should i go for streaming server ? I need to reduce the time taken for conversion. Will converting to FLV be faster ?

  Read the article

• change default userid for connecting to local AFP share?

  - by Stew

  I've got Netatalk & Avahi running on a local Ubuntu server--I use two different userids, "afp" for Time Machine and "stew" to access my media files etc. In order to mount a shared directory on my server, I have to click "Connect As..." and enter my userid/password every time, because it always tries to log in using Time Machine's userid. I'm not sure if this is because that userid is set as default, or just because it's the last userid that logged in to that server--either way: Is there a way to change the default userid for connecting to a given server? Mega extra credit: I'd love to have this automated, such that my userid, "stew", is always logged in (and heck, it'd be great to have the directories always mounted, too!) whenever the server is available. Thanks!

  Read the article

• Simple UPDATE query with (sometime) long query times

  - by Eric

  I run a dedicated MySQL server (2 cores, 16GB RAM) serving 100-200 requests per second. It is getting sluggish during peak traffic and I have a hard time optimizing the server. So I'm looking for some ideas now that I have done lots of Innodb fine-tuning with the "TUNING PRIMER" The query that now generates most slow queries is the following (see result from mysqldumpslow): Count: 433 Time=3.40s (1470s) Lock=0.00s (0s) Rows=0.0 (0), UPDATE user_sessions SET tid='S' WHERE idsession='S' I am very surprised to have so many long queries for such a simple query with no locking. Fyi, the table is InnoDB and has 14000 rows. It contains all active sessions on the site with approx 10 UPDATE and SELECT hits per second. Here is its structure: CREATE TABLE `user_sessions` ( `personid` mediumint(9) NOT NULL DEFAULT '0', `ip` varchar(18) COLLATE utf8_unicode_ci NOT NULL, `idsession` varchar(32) COLLATE utf8_unicode_ci NOT NULL, `datum` date NOT NULL DEFAULT '0000-00-00', `tid` time NOT NULL DEFAULT '00:00:00', `status` tinyint(4) NOT NULL DEFAULT '0', KEY `personid` (`personid`), KEY `idsession` (`idsession`), KEY `datum` (`datum`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci Any ideas?

  Read the article

• Selected wrong OS from bootloader settings and now can't do anything

  - by Eric

  I'm trying to help a friend out with an urgent issue he is having. He has two Windows 7 installations when he was starting up his computer so the bootloader menu was making him select an OS every time he restarted. One installation is functional and the other is not. He wanted to make it so that he did not have to select the correct OS every time he booted up. He chose the wrong (non-functional) operating system in the windows settings and set the time to select an operating system int he bootloader menu to 0 seconds. Now, his computer attempts to boot into a non-working operating system and he has no way of selecting the correct operating system so that he can fix his mistake. What can he do to get into the functional OS so that he can fix his mistake? Thanks so much.

  Read the article

• Selectively allow NetBIOS inbound traffic

  - by shayan

  This is what I try to achieve from a very high point of view: Every time someone tries to access my shared folders (on Windows) a popup should open and ask for my permission. Do you know any tool? Something like "NetShareMonitor" is helpful for monitoring only A tool like an Antivirus these days has a focus on outgoing traffic A normal firewall does not allow me to select at the time of request. Setting User Permissions is not an option, I want to allow/deny at the time of request even if it is the same user over and over again.

  Read the article

• Slow Starting DHCP Client Service - HP Thin Clients

  - by Ryan

  We have recently began adding XPe thin clients to our domain in preperation for a new citrix environment. One thing that has been picked up on in testing is that they appear slow to boot. The issue manifest's it's self as the classic "Applying Computer Settings..." screen we are all used to seeing. After digging into the issue it appears the DHCP Client service is taking some time to load on boot, this varies but I would estimate it can take around 1 minute in some cases. I've eliminated the classic issues, DHCP is responding correctly and in quick time. DNS is not the cause and GPO's are applying promptly. A simple workaround is to assign the client a static IP which work's great so the TCP/IP servies are obviously firing up quickly, just not DHCP Client. Does anyone have any idea's on how I may be able to improve the service start time? Keen to find a better solution before I get my arm twisted into setting up 250 thin clients with static addressing!

  Read the article

• Apache connection intermittantly times out on LAN

  - by jonescb

  I'm using Fedora 12 with Apache 2.2.14, and I was having this error on 2.2.13 as well. Even when I connect to my server over LAN, Firefox will occasionally time out while connecting. I can't figure out what is causing this. The error log isn't showing anything. I even cleaned the error log file, so that if something happened, it'd be a little easier to spot. But I'm still getting time outs, and nothing in the error log. Can anybody help me find what the problem is? Here is my httpd.conf Pastebin It's the default Fedora configuration; I've only changed the ServerName if I remember correctly. I'm pretty sure it's not the Timeout setting, because on LAN it should never time out. I don't believe it's a load issue either, I'm the only one connecting to it. I'm not an Apache expert, so if more information is needed I'll need some instructions on how to get that data.

  Read the article

• HP Probook 6550b has issues with an external monitor

  - by chama

  I recently got a new HP Probook 6550b laptop for work. However, very often, when left alone (not put to sleep), the built in display will go dark. Not only that, but whenever I plug in an external monitor, the display will blank out as well. Sometimes after this happens, putting the laptop to sleep and then waking it up solves the problem. But only sometimes and only for a short time. The next time I plug in my monitor, it happens again. I know this isn't only my problem - 6 other people got the same laptop as I have at the same time, and we're all having such issues. Any suggestions as to the root of this problem and a way to fix it? It's driving me crazy!

  Read the article

• php.ini date.timezone usefulness?

  - by Buttle Butkus

  I'm not sure if this is a question for serverfault or stackoverflow but it seems like it has a lot to do with server config. We have a server in chicago and the server's clock is on chicago time. But since the business is located in California, it would seem to make sense to use pacific time. What happens when server time is Chicago, and php.ini directive date.timezone is set to "America/Los_Angeles"? How will that affect logs written to mysql, error logs, etc? I've looked at the Apache error log and, as I expected, the php directive does not affect it. Times are all servertime. Thanks.

  Read the article

• Internet addicted, need software to control my usage and block access

  - by user69991

  I found I have problem to be a little addictive with surfing on internet. I am trying to find a free ware, (or software), that can help me for exemple to be just 2 hours per day on internet. Like it is counting the minutes and than stop working. not just 2 hours in one time, but in whole day.... maybe that it has different modes (2hours together, in whole day, 2hours + little reserve time) but I need something that really take me away access from internet :) Just counting time, is not enough for me :) Hope we will find something because, I just can't avoid not to loose 4 hours on internet. I have windows 7

  Read the article

• Excel Pivot Tables -- Divide Numerical Column Data into Ranges

  - by ktm5124

  Hi, I have an Excel spreadsheet with a column called "Time Elapsed" that stores the number of days it took to complete a task. I would like to make a pivot table out of this spreadsheet where I divide the "Time Elapsed" column into ranges, e.g., how many tasks took 0 to 4 days to complete how many tasks took 5 to 9 days how many took 10 to 14 days how many took 15+ days Do I have to create new columns in my spreadsheet dedicated to each interval (0 to 4, 5 to 9, etc.) or can I use some feature of pivot tables to separate my one "Time Elapsed" column into intervals? Thanks in advance.

  Read the article

• Windows 2008 VPS always crashes when out of disk space

  - by Pickels

  Hello, I am renting a Windows server 2008 dc SP2 VPS for hosting my Asp.Net projects. Now for the second time this month my VPS ran out of disk space. The first time it was a log file that got to big and yesterday it was my mistake for uploading a website without noticing the lack of space on my VPS. Now the side effect this has is that my VPS corrupts some files when trying to write them. Last time it was Plesk that stopped working yesterday it was IIS. So I was wondering is this normal behavior? I called my service provider to ask if they could restore a back-up and to ask if this is normal and they ensured me it was. I am not trying to blame them and I know it's mostly my fault for not monitoring my VPS better or for not setting better defaults.

  Read the article

• Excel: What formula combines this data into one COUNT amount?

  - by Mike

  I have 30 colleagues who are answering questions over 3 time periods. Each has their own Excel workbook with the questions, and over the year they update it. I collate their worksheets into one master worksheet, but now need to combine their answers into a simple table. The questions, the time periods and then a COUNT of how many answered it. For example: I need a table that shows me how many people (not the persons name at this point) answered question 10 in time period 2. I can't use a database before someone mentions it ;). Many thanks Mike.

  Read the article

• ssh crashes connecting using host names on windows

  - by AliGibbs

  On a new install of Windows Server 2008, I attempting to use ssh to connect to another host. I have installed putty/openssh. This works without a problem when trying a command such as: ssh 192.168.0.2 However, this will crash when trying something like: ssh testserver with the error as follows in the windows event viewer: Faulting application ssh.exe, version 0.0.0.0, time stamp 0x40843497, faulting module kernel32.dll, version 6.0.6001.18000, time stamp 0x4791a76d, exception code 0xc0000005, fault offset 0x0004bbb8, process id 0xe94, application start time 0x01cb873195e795d5. Any suggestions? thanks in advance

  Read the article

• Troubleshooting a crash with Windows 7

  - by AngryHacker

  I have a folder with several thousand videos (All .MPG extensions). When I open the folder with these videos, it shows up fine, but as I start scrolling down, it crashes the Windows Explorer. In the Event Viewer, I see this: Faulting application name: Explorer.EXE, version: 6.1.7600.16450, time stamp: 0x4aebab8d Faulting module name: ntdll.dll, version: 6.1.7600.16559, time stamp: 0x4ba9b802 Exception code: 0xc0000374 Fault offset: 0x00000000000c6df2 Faulting process id: 0x954 Faulting application start time: 0x01cbb1b71edf3b51 Faulting application path: C:\Windows\Explorer.EXE Faulting module path: C:\Windows\SYSTEM32\ntdll.dll Report Id: ee987372-1dc4-11e0-8e06-406186ea9135 I suspect that one of the videos has bad metadata. I removed the Length column and it was still crashing. I then removed the Date column and the problem disappeared. How do I go about troubleshooting this problem or at least identifying the file that's causing the issue.

  Read the article

• Problems with XP, Office, and PC in general - any ideas?

  - by molecule

  Hi all This may not make a whole lot of sense so pls bear with me... I am about to perform a routine check on one of my user's PC. Some background - the PC has a Xeon processor and 4Gb of RAM and running XP SP3 He has 2xHDD and pagefile is hosted on the secondary HDD (D:) and min/max values are set to 4096. NO pagefile on C: This user has 6 monitors so he has an NVIDIA Quadro NVS440 hosting 4xmonitors and an NVIDIA Quadro NVS290 hosting 2xmonitors. There is a video card driver from NVIDIA which is compatible with both NVS440 and NVS290 and he is on the latest version of that driver. (Note: Make of video cards are different - one is from leadtek and the other from Nvidia) He is a heavy Bloomberg, Outlook, Word, and Excel user and runs two Citrix applications. Other apps are FoxIt PDF and IE. Problems - Outlook and Excel frequently crashes - I am going to perform an Outlook and Excel repair and also check/remove unnecessary addins - will he lose any customizations if I repaired and chose "Restore my shortcuts while repairing" and do not select "Discard my customized settings and restore default settings". Does repair really repair anything? FYI - It stopped crashing ever since i moved a large spreadsheet he has open to his local HDD instead of over the network. This spreadsheet "refreshes" constantly as it is pulling live data to update cells and I suspect it was auto-saving so frequently that it caused crashes if saving over the network. At times, his right click completely fails to respond. His left click works fine but he can't right click on anything in any Window and even on the desktop. Sometimes, he needs to start to close certain applications such as Adobe and the right click will start functioning again. I removed Adobe and installed FoxIt as I figured it was a resource issue but I do not think so as he does have sufficient resources when the problem is happening. Sometimes he can't bring task manager up until he kills certain apps. Definitely sounds like a resource issue but I am not confident that is the root cause. Also not sure if this is related to one of the apps installed but his Start bar flickers (does not completely disappear) intermittently from time to time. The taskbar icons which are hidden appear and then get hidden again as if it was having "fits". I have performed reg scans, malware scans etc but problems do not go away. I am planning to perform sfc /scannow and office repair but would like to know if anyone has any other suggestions. What about setting a "small" pagefile on C:. I have heard that this is recommended and may be the reason why a minidmp file was not generated when he encountered a blue screen. Also, any feedback on his video cards? Do you think different models would cause problems? The drivers seem to work but he only has 2.5Gb out of 4Gb available RAM as I believe the video card chomped up a portion of this. I have recommended creating a new profile for him but due to the amount of customisations he has and the amount of time and effort it will take to get him up and running again, he prefers to bear with the problem than to go down that path. However, at least once a week, his PC acts up and I can't think of any other tools or techniques to rectify his problems. I guess we are at a stage where we just want to "stabilize" things so he won't encounter issues that frequently. Any feedback is very much appreciated.

  Read the article

• How do I log file system read/writes by filename in Linux?

  - by Casey

  I'm looking for a simple method that will log file system operations. It should display the name of the file being accessed or modified. I'm familiar with powertop, and it appears this works to an extent, in so much that it show the user files that were written to. Is there any other utilities that support this feature. Some of my findings: powertop: best for write access logging, but more focused on CPU activity iotop: shows real time disk access by process, but not file name lsof: shows the open files per process, but not real time file access iostat: shows the real time I/O performance of disk/arrays but does not indicate file or process

  Read the article

< Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >