Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 335/1051 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >

  • Debian 7: "Failure of key exchange and association"

    - by pyrogoggles
    I'm installing Debian using the Live CD with GNOME and the non-free packages. The internet works just fine when using the live CD, but when you try to open the installer and select a network, it gives me the error of "Failure of key exchange and association". I've put everything in right, and tried multiple times. However, it never works. Am I just going to have to use ethernet to install? Thanks, people.

    Read the article

  • OSSEC agent behind NAT

    - by Eric
    I am working on an OSSEC deployment where I will have multiple agents behind 1 public IP. Below is an example of the setup Private Network OSSEC-Agent1 (192.168.1.10) OSSEC-Agent2 (192.168.50.33) OSSEC-Agent3 (10.10.10.1) Those IPs NAT to 1 public IP (1.1.1.1) Then 1.1.1.1 talks to the public OSSEC server on 2.2.2.2 I've read some OSSEC documentation talking about NAT here, but it doesn't tell me exactly what I need to know. Their example is using an entire /24 subnet and mine will mainly have multiple agents to only 1 public IP. With the setup so far, I brought Agent1 online fine and it is communicating to the OSSEC server. However Agent2 continues to fail trying to connect to 2.2.2.2. Even though when I added the key, I had the correct name for it, so I know it talked to the portal at least once for that information. I'm assuming it's just getting confused with the multiple keys to 1 public IP. I basically want to know if this is possible and/or if I'm just overlooking something simple. Any help would be greatly appreciated.

    Read the article

  • help with xorg.conf: xrandr on one of two widescreen monitors; rhel5, kde, ATI Radeon X1300

    - by user35997
    Can anyone help with me configure my dual-screen monitors for rotation? I have xrandr 1.1. Have tried various approaches, nothing takes. I can't even get the xrandr options to show up in KDE's Display control panel. Thanks1 My lspci output: 03:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] My current xorg.conf (works, minus screen rotation): # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "Multihead layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "off" Option "Clone" "on" EndSection Section "Files" EndSection Section "Module" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Dell 2407WFP (Digital)" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "dpms" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "Videocard0" Driver "vesa" EndSection Section "Device" Identifier "Videocard1" Driver "vesa" VendorName "Videocard Vendor" BoardName "ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" Option "DesktopSetup" "horizontal" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection

    Read the article

  • MegaCLI always returns blank output

    - by JamesHannah
    This server is a Dell R200 running Ubuntu 8.04LTS using a LSI SAS1068E raid card supplied from Dell, I suspect that there might be some kind of RAID issue with the hardware raid built into the motherboard, but I can't seem to get MegaCLi to return any useful output: root@81 $ ./MegaCli -AdpAllInfo -aALL root@81 $ ./MegaCli -PDList -aALL root@81 $ The disks work and AFAIK the raid software is installed correctly. I've seen this issue on RedHat issues also in the past. The RAID was initially setup through the BIOS on this server and appears to be functioning fine apart from this.

    Read the article

  • What does "link to unknown" mean?

    - by Question Overflow
    I just upgraded my server to Fedora 17 which made a switch of my bootloader from GRUB Legacy to GRUB2. There are two symbolic links in the /etc folder that points to the files grub.conf and grub.cfg in /boot/grub and /boot/grub2 respectively. Though the targets seem correct, the link icons are displaying an X status which seems to indicate that the links are broken. Upon right-clicking the property type, it states "link to unknown". The file size of the link corresponds exactly with the file size of the target file, so, why does the links appear to be broken? The image of the link icons: As requested, the following are the outputs from the commands: $ ls -l /etc/grub.conf lrwxrwxrwx. 1 root root 22 Jul 14 2011 /etc/grub.conf -> ../boot/grub/grub.conf $ ls -l /etc/grub2.cfg lrwxrwxrwx. 1 root root 22 Dec 10 18:57 /etc/grub2.cfg -> ../boot/grub2/grub.cfg

    Read the article

  • Windows 8 won't boot after Boot Repair

    - by Rudolph Gottesheim
    I've got a Sony Vaio laptop. Until yesterday I had Windows 7 and Ubuntu 12.04 installed. Today I upgraded to Windows 8, which killed my OS selection screen. So I booted to Ubuntu 12.10 from a USB stick and ran Boot Repair. This recovered the GRUB screen and let me boot into my Ubuntu 12.04 installation, but now I can' boot Windows 8. When I select the option that booted Windows 7 before, it looks like it wants to start Windows 7 (sic) again (black screen, with the text "Windows is loading" or something), but then reboots the machine after a few seconds. I'm sure Boot Repair can fix this, but I know far too little about the whole booting thing to know the right settings for it. Here's my boot repair report thing.

    Read the article

  • What is the meaning of those numbers in the second column after typing "ls -l"?

    - by Nick Dong
    drwxr-xr-x. 2 root root 4096 Jun 29 16:44 db drwxr-xr-x. 2 root root 4096 Jun 29 16:44 djproject -rwxr-xr-x. 1 root root 38 Jun 29 16:44 index.html drwxr-xr-x. 2 root root 4096 Jun 29 16:44 jobs -rwxr-xr-x. 1 root root 252 Jun 29 16:44 manage.py drwxr-xr-x. 3 root root 4096 Jun 29 16:44 templates What is the meaning of those numbers in the second column? Do they have some relation to file and folder permissions? How do I change the numbers?

    Read the article

  • procfs and youtube flash video

    - by trideceth12
    Up until recently (about 3 months ago), ALL open flash videos had deleted file handles in the procfs virtual folder for the flash plugin, I could see them thus: ps x|grep flash cd /proc/#PROCESS#/fd ls -l cp #FILE# ~/ This still works for the vast majority of flash video, but some YouTube videos no longer keep this open file handle. My questions are: A) Why not? B) Where are these files now stored? C) How can I get this file Yes I know I could probably get a browser plugin, it just annoys me that they are hiding these files so I want to keep doing it the hard way.

    Read the article

  • How can I sort out Xephyr's keyboard mapping?

    - by qedi
    When I start up Xephyr inside of X, my keyboard map becomes wonky mostly just for non-printing characters. I can't use arrow keys. According to xev, The down arrow gets mapped to Super_R. The up arrow is Print Screen. PgDown is mapped to "Menu". My keyboard works fine in the original X display (:0), but in the Xephyr subdisplay (:1), nothing else quite works right. I don't have any funky xmodmap things going on in my main X display that I'm aware of. All I really do is setxkbmap -option ctrl:swapcaps.

    Read the article

  • Wake On Lan for Fedora 12

    - by Toymakerii
    I have a fedora 12 box that I am using as a sandbox for web development and a few other toys. The box gets really hot so I would like it to sleep/hibernate when no one is using it, however most of the people connecting to the box will not be able to access it physically. Is it possible to set up a Wake On Lan that wakes up the machine when it detects an SSH connection? A google search didn't yield much information. (or atleast I wasn't smart enough to register it as useful!)

    Read the article

  • Stop squid caching 302 and 307 with deny_info

    - by 0xception
    TLDR: 302, 307 and Error pages are being cached. Need to force a refresh of the content. Long version: I've setup a very minimal squid instance running on a gateway which shouldn't not cache ANYTHING but needs to be solely used as a domain based web filter. I'm using another application which redirects un-authenticated users to the proxy which then uses the deny_info option redirects any non-whitelisted request to the login page. After the user has authenticated the firewall rule gets placed so they no longer get sent to the proxy. The problem is that when a user hits a website (xkcd.com) they are unauthenticated so they get redirected via the firewall: iptables -A unknown-user -t nat -p tcp --dport 80 -j REDIRECT --to-port 39135 to the proxy at this point squid redirects the user to the login page using a 302 (i've also tried 307, and i've also make sure the headers are set to no-cache and/or no-store for Cache-Control and Pragma). Then when the user logs into the system they get firewall rule which no longer directs them to the squid proxy. But if they go to xkcd.com again they will have the original redirection page cached and will once again get the login page. Any idea how to force these redirects to NOT be cached by the browser? Perhaps this is a problem w/ the browsers and not squid, but not sure how to get around it. Full squid config below. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl localnet src 192.168.182.0/23 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl https port 443 acl http port 80 acl CONNECT method CONNECT # # Disable Cache # cache deny all via off negative_ttl 0 seconds refresh_all_ims on #error_default_language en # Allow manager access only from localhost http_access allow manager localhost http_access deny manager # Deny access to anything other then http http_access deny !http # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !https visible_hostname gate.ovatn.net # Disable memory pooling memory_pools off # Never use neigh cache objects for cgi-bin scripts hierarchy_stoplist cgi-bin ? # # URL rewrite Test Settings # #acl whitelist dstdomain "/etc/squid/domains-pre.lst" #url_rewrite_program /usr/lib/squid/redirector #url_rewrite_access allow !whitelist #url_rewrite_children 5 startup=0 idle=1 concurrency=0 #http_access allow all # # Deny Info Error Test # acl whitelist dstdomain "/etc/squid/domains-pre.lst" deny_info http://login.domain.com/ whitelist #deny_info ERR_ACCESS_DENIED whitelist http_access deny !whitelist http_access allow whitelist http_port 39135 transparent ## Debug Values access_log /var/log/squid/access-pre.log cache_log /var/log/squid/cache-pre.log # Production Values #access_log /dev/null #cache_log /dev/null # Set PID file pid_filename /var/run/gatekeeper-pre.pid SOLUTION: I believe I might have found a solution to this. After days and days trying to figure it out, only through a random stumble I found client_persistent_connections off server_persistent_connections off This did the trick. So it wasn't so much cache as it was a single persistent connection messing things up. W000T!

    Read the article

  • Taking a screencast in Backtrack 4

    - by Leboff
    I'm working on a tutorial using Backtrack 4 Live USB, and I would like to take a screencast of what I'm doing (not just screenshots) So far I have tried these application with limited success: -recordmydesktop -xvidcap -wink -istanbul -vlc -vnc2flv Each time I try the resulting files are generally choppy (at best 1 frame per second) and most don't even end up with a clear view of the screen each time. If anyone has suggestions for the screencast I would greatly appreciate it. Thanks, Bryan

    Read the article

  • Limit which processes a user can restart with supervisor?

    - by dvcolgan
    I have used supervisor to manage a Gunicorn process running a Django site, though this question could pertain to anything being managed by supervisor. Previously I was the only person managing and using our server, and supervisor just ran as root and I would use sudo to run supervisorctl restart myapp when needed. Now our server has to support multiple users working on different sites, and each project needs to be able to restart their own gunicorn processes without being able to restart other users' processes. I followed this blog post: http://drumcoder.co.uk/blog/2010/nov/24/running-supervisorctl-non-root/ and was able to allow non-root users to use supervisorctl, but now anyone can restart anyone else's processes. From the looks of it, supervisor doesn't have a way of doing per-user access control. Anyone have any ideas on how to allow users to restart only their own processes without root?

    Read the article

  • Unix Permissions issue with users belonging to the same group accessing a folder

    - by TK Kocheran
    I have a folder I'd really like to allow another user on this machine access to. I'm using mt-daapd to serve music to the network, so I'd like to enable the mt-daapd user to access my Music directory, /home/rfkrocktk/Music. The master user is rfkrocktk obviously. I've tried to set all of my permissions properly on the directory, but the mt-daapd user can't acces the files. I created a group called media-users and added both rfkrocktk and mt-daapd to it in order to give mt-daapd permission to simply read all of the files in that directory and subdirectories. If I run id on each of my users, here's what's displayed: $ id rfkrocktk > uid=1000(rfkrocktk) gid=1000(rfkrocktk) groups=1000(rfkrocktk),4(adm),20(dialout),24(cdrom),29(audio),46(plugdev),104(lpadmin),115(admin),120(sambashare),124(vboxusers),1001(jupiter),2002(media-users) $ id mt-daapd > uid=123(mt-daapd) gid=65534(nogroup) groups=65534(nogroup),2002(media-users) It definitely seems that both users are a part of the media-users group, so what could be going wrong? If I run ls -l on the actual Music directory to see its permissions, here's the output: drwxr-Sr-- 201 rfkrocktk media-users 12288 2011-01-13 12:26 Music If I run ls -l on the Music directory to get its children, here's the output: drwxr-Sr-- 3 rfkrocktk media-users 4096 2010-12-20 15:31 2DBoy drwxr-Sr-- 3 rfkrocktk media-users 4096 2010-05-25 12:50 ABBA drwxr-Sr-- 3 rfkrocktk media-users 4096 2009-12-28 15:19 Access Denied drwxr-Sr-- 10 rfkrocktk media-users 4096 2009-12-28 15:19 AC-DC drwxr-Sr-- 3 rfkrocktk media-users 4096 2009-12-28 15:19 Aerosmith drwxr-Sr-- 3 rfkrocktk media-users 4096 2010-06-04 10:45 A Flock of Seagulls drwxr-Sr-- 4 rfkrocktk media-users 4096 2010-05-28 18:13 Alestorm drwxr-Sr-- 3 rfkrocktk media-users 4096 2010-06-22 23:29 Amon Amarth drwxr-Sr-- 5 rfkrocktk media-users 4096 2009-12-28 15:19 Anberlin ... From this, it would seem that I should be able to access the folders from mt-daapd, but I can't. Running sudo -i -u mt-daapd ls -l /home/rfkrocktk/Music displays nothing, indicating to me that for whatever reason, mt-daapd doesn't have access to read the folder. What am I doing wrong?

    Read the article

  • I install Ubuntu 13.10 and reboot and im on KDE desktop?

    - by jgamer578
    Hi I'm Jacob and I have no idea what's going on. I installed Ubuntu 13.10 today and was playing around with it for a while and dl'd a bunch of apps from software center and stuff. Eventually I installed steam and (finally) got it working. I downloaded TF2 and had some weird issue where the screen got so distorted to the point I could not play. So I dl'd a driver for my graphics card from the additional drivers app (or whatever it's called) and when it was done I restarted my computer (because it said to.) When the PC booted up it loaded the KDE desktop and I have no idea why. I had unity before I rebooted. Ubuntu 13.10 is the only OS installed on my PC, and I still have all the apps that I downloaded, but I kinda like unity (I started using Ubuntu after they switched to unity) and want it back. Thanks for reading and any help in advance, Jacob.

    Read the article

  • Webserver: chrooted PHP gives mysql.sock error when attempting to reach mysql

    - by Jon L.
    Hey guys, I've configured an Ubuntu webserver with Nginx + PHP5-FPM. I've created a chrooted environment (using jailkit) that I'm tossing my developers into, from where they can develop their test applications. Chroot jail: /home/jail Nginx and PHP5-FPM run outside the chroot, but are configured to function with websites within the chrooted environment. So far, Nginx and PHP5-FPM are serving up files without issue, except for the following: When attempting to connect to MySQL, we receive this error: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' Now, I believe the issue is due to the non-chrooted php.ini referencing mysqld.sock outside of the chroot environment (it's actually using the MySQL default setting currently). My question is, how can I configure PHP to access MySQL via loopback or similar? (Found that as a suggestion in a google result, but without any instructions) Or if I'm missing some other obvious setting, let me know. If there's an option of creating a hardlink (that would remain available even if mysql is restarted), that would be handy as well.

    Read the article

  • Instabilities with Bridged and bonded interfaces

    - by Henry-Nicolas Tourneur
    I did post yesterday to get a working setup with several bridged interfaces used for virtual machines (KVM/libvirt). One of the bridged interface is just using eth3 as its ports while the second one (public traffic) is using an ethernet bonded interface. That setup is working but not all the time ! I can start a download from a vm, then it will stop and freeze! So I don't know if my bridge parameters are correct, could you check the below config ? iface eth3 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 pre-up ip link set bond0 up down ip link set bond0 down auto br0 iface br0 inet static address 10.160.0.7 netmask 255.255.255.128 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br0:1 iface br0:1 inet static address 10.160.0.9 netmask 255.255.255.255 auto br0:2 iface br0:2 inet static address 10.160.0.10 netmask 255.255.255.255 auto br1 iface br1 inet static address 217.4.40.242 netmask 255.255.255.240 gateway 217.4.40.241 pre-up /etc/network/firewall start bridge_ports bond0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br1:1 iface br1:1 inet static address 217.4.40.252 netmask 255.255.255.255 auto br1:2 iface br1:2 inet static address 217.4.40.253 netmask 255.255.255.255 And yes, it also sometimes speaks about martian on the host: kernel: [249146.055172] martian source 10.160.0.17 from 10.160.0.10, on dev vnet2 kernel: [249146.073122] ll header: ff:ff:ff:ff:ff:ff:54:52:00:76:c3:5c:08:06

    Read the article

  • How to improve the HTML formatting in Evolution mail client

    - by Tom
    I have a question about viewing HTML emails in the Evolution mail client. Basically, I am receiving some emails that look lovely in Thunderbird but not in Evolution because the HTML rendering of Evolution isn't as advanced. Does anyone know how to improve the HTML rendering of Evolution? e.g. a plugin, tip, code patch, etc... The closest I've got is to right-click the email, "Save As...", save as a html file, then open in Firefox. Not exactly streamline! What emails can't it display well? We use the subversion revision control system which is set up to send an email whenever someone commits via svnnotify all nicely coloured via the --handler HTML::ColorDiff -d parameter. When Evolution fails to use the colours, I find it very had to read the raw diff.

    Read the article

  • How to copy remote machines text to local machines clipboard through SSH?

    - by recluze
    I work on a remote machine through ssh. I have a very large text file there (approx. 500 lines) which I usually need to modify, then copy the contents of that file and paste it in my local browser. The way I usually do this is cat filename and then select/copy the ssh output. That takes a lot of time. I was wondering if there is a utility that will put the remote file's contents in my local clipboard.

    Read the article

  • can't figure out why apache LDAP auth fails

    - by SethG
    Suddenly, yesterday, one of my apache servers became unable to connect to my LDAP (AD) server. I have two sites running on that server, both of which use LDAP to auth against my AD server when a user logs in to either site. It had been working fine two days ago. For reasons unknown, as of yesterday, it stopped working. The error log only says this: auth_ldap authenticate: user foo authentication failed; URI /FrontPage [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server], referer: http://mysite.com/ I thought perhaps my self-signed SSL cert had expired, so I created a new one for mysite.com, but not for the server hostname itself, and the problem persisted. I enabled debug-level logging. It shows the full SSL transaction with the LDAP server, and it appears to complete without errors until the very end when I get the "Can't contact LDAP server" message. I can run ldapsearch from the commandline on this server, and I can login to it, which also uses LDAP, so I know that the server can connect to and query the LDAP/AD server. It is only apache that cannot connect. Googling for an answer has turned up nothing, so I'm asking here. Can anybody provide insight to this problem? Here's the LDAP section from the apache config: <Directory "/web/wiki/"> Order allow,deny Allow from all AuthType Basic AuthName "Login" AuthBasicProvider ldap AuthzLDAPAuthoritative off #AuthBasicAuthoritative off AuthLDAPUrl ldaps://domain.server.ip/dc=full,dc=context,dc=server,dc=name?sAMAccountName?sub AuthLDAPBindDN cn=ldapbinduser,cn=Users,dc=full,dc=context,dc=server,dc=name AuthLDAPBindPassword password require valid-user </Directory>

    Read the article

  • Vim Stuck In Insert Mode

    - by Levi Hackwith
    I've been using Vim for several months now via my web host (they allow putty access). All of a sudden, the escape key has become unresponsive. I cannot exist insert or any other mode by simply hitting escape. I have to hit F1 which brings up the help in vim and kicks me into command mode. I'm most certain that my escape key on my keyboard is functioning fine since all of my windows shortcuts that use the escape key operate normally. I know this is a ridiculous question and I'm certain there's a lot more to look into regarding a solution. What I really need is a solid lead as to where to start looking. Things that might help: I'm using vim via putty I'm logging in using jailshell I'm not root

    Read the article

  • calling a different python interpreter from bash command line

    - by Dennis Daniels
    I have python 2.7 installed [user@localhost google_appengine]$ python Python 2.7 (r27:82500, Sep 16 2010, 18:03:06) [GCC 4.5.1 20100907 (Red Hat 4.5.1-3)] on linux2 Type "help", "copyright", "credits" or "license" for more information. I want to use the python 2.5.2 that is in this directory [user@localhost Downloads]$ ls |grep "Python-2*" Python-2.5.2 Python-2.5.2.tgz to run a python script in Khan Academy platform against a google app engine application sudo python sample_data.py -a ~/workspace/GAE/google_appengine/appcfg.py upload Currently, when running the last script 2.7 python complains a lot (Google App Engine runs on 2.5.2 mostly and 2.6 almost) I would like to do something like sudo python env set ~/Downloads/Python-2.5.2 sample_data.py -a ~/workspace/GAE/google_appengine/appcfg.py upload Is this possible? If yes, please point the way. If not, please suggest a way to call python2.5.2 WITHOUT having to uninstall python 2.7 many many thanks Dennis

    Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >