Search Results

Search found 18406 results on 737 pages for 'steve button'.

Page 335/737 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >

  • Toshiba Portege M400 screen rotation not working under Windows 7 x64

    - by Christi
    I have installed Windows 7 on my Toshiba Portege M400. This in itself was relatively tricky.* However, the button utilities aren't quite working for me. One of the buttons tries to launch the Toshiba Assist program, which doesn't appear to be available under Windows 7 for the M400, but this I can live without. More important is that the screen won't rotate as it is supposed to when you hold the "cancel" (X in a circle) button on the bezel. The PC is set to run "C:\Program Files (x860\Toshiba\Toshiba Rotation Utility\phtrot.exe". There is a "trot.exe" file in the same directory (the former appears to be to cause slightly different behaviour when rotation is done by press and hold). Neither of these programs rotates the screen either by using the buttons or from the command line. The screen is rotating normally when switching from tablet to laptop mode, so there does not appear to be an inherent problem with rotation. I'd just like to be able to use the buttons on the side of the screen to change the screen orientation. Windows XP used to have a "setrot" utility to do this, but that seems to have gone in Windows 7 Thanks for your help. *Just in case anyone comes looking for how to do this, you need to extract driver files from http://cdgenp01.csd.toshiba.com/content/support/downloads/util_raid_os2007252a.exe, which does not seem to be listed among the available files for the m400. This executable contains the SATA interface drivers that will need to be loaded by the installer before it can see your hard disk drive. It needs to be unpacked and the files copied to a USB key which they can then be loaded from in the install process. The utilities etc. for installation post windows install are all available from the Toshiba USA support website.

    Read the article

  • KVM recommendations

    - by alex
    I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

    Read the article

  • SQL Server 2008 Express + Reporting Services on Windows 7

    - by TimothyP
    I'm trying to install SQL Server Express 2008 and Reporting Services on a x64 Windows 7 Machine for development purposes. I've installed SQL Server 2008 Express with the Microsoft Web Platform Installer I had to manually enable the SQL Server Browser in the Sql Server Configuration Manager and tried to enable the SQL Server Agent but that simply doesn't work. Keeps throwing an RPC error: "The remote procedure call failed. [0x800706be]". The start mode is set to Disabled and I cannot change it. Even though I selected the SQL Server Express with advanced services in the web platform installer I could not find any reference to SQL Server Reporting Services so I used the SQL Server Installation Center x64 application to "upgrade" to SQL Server Express 2008 with advanced services... this installed many things but still I couldn't find any reference to SQL Server Reporting Services other than an application called: "Reporting Services Configuration Manager" This opens up a dialog called "Reporting Services Configuration Connection" which is asking for a server name (shows the name of my machine) and a Find button. When I click the find button I get: "Unable to connect to the Reporting Server WMI provider. Details: Invalid Namespace". I found some references on the web to solve this problem, but they refer to a directory: "%ProgamFiles%\Microsoft SQL Server\MSRS10.SQL2008\Reporting Services\" which does not exist anywhere on my system. (The directories for SQL Server are there, but there is no Reporting Services directory anywhere). What am I doing wrong here? Wasn't the web platform installer supposed to handle all this? Thnx for any advice. PS: Most google results refer to 2005 vs 2008 problems, but I never had 2005 installed on this system, it's a newly installed development machine.

    Read the article

  • eMachine W5243 won't POST; fans run but optical drive will not open.

    - by NicciAdonai
    Symptoms are what is described in the title. The machine reacts to the power button being hit by spinning up the two fans: CPU and PSU. The hard drive (SATA) spins up as well. No other reaction. This one symptom is particularly weird, though: the optical drive will not open with the IDE cable attached, but if I unplug it from the mobo it will. I can turn the PC on with it attached, won't open; then unplug IDE while it is still on, WILL open; then plug IDE back in with the PC STILL ON, WON'T open. I have disconnected every peripheral unnecessary to POST. These include: mouse/keyboard, PCI modem, the IDE optical drive (power and data), and the SATA HDD (power and data). Video is onboard. The only two things connected are DB15 video and power cable. There were 2 512 MB DDR2 sticks of RAM in it. I have tried running it with just one of them, then switched the other in. Currently seated is a completely different 1 GB stick that I keep around for troubleshooting purposes, and I have tried it in both slots. I have replaced the CMOS battery with a used one I had lying around, and which worked in the computer it came out of. I have tested the PSU with a tester to confirm it was good, then tried connecting another PSU just in case--same symptoms. I have even tried a suggestion I found elsewhere on this site wherein one disconnects power from the PSU and then presses the PC's power button twice, thereby "resetting" the PSU. Currently I am trying yet another suggestion: turn it on and wait an inordinate amount of time for POST. Any help would be appreciated.

    Read the article

  • Outlook users connected to exchange can email from other email accounts

    - by Sherriffwoody
    We have found an issue on our systems whereby an outlook user (both 2007 and 2010) connected to our Exchange server (2007) can send emails as other users using the following steps Within Outlook Click <New Email> Select the <From> button to show a list of accounts outlook contains, but it also shows the option Select<Other Email Address>. This brings up a small dialog box with another button which when selected allows the user to select an email from their contacts or the Active Directory. The user in most cases can select any email within the Active Directory and send an email as if it were coming from that selected email. It seems not everyone has this ability and I'm guessing it is something to do with settings in exchange or AD(version 6) or is there a group policy that can be implemented to stop users being able to do this. We have no idea what allows this and I have failed to find anything using Dr Google. No one has setup delegates within outlook but it does seem to be something similar? Does anyone know how to lock this down? Thanks in advance

    Read the article

  • Can't get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

    - by Kyle Noland
    I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue: Set the date and Time Detect the IBM ServeRAID card and install the latest firmware Clear the hard disks Set up the RAID array The next step is format the NOS partition. I select my partition size and the utility goes through the following steps: Creating NOS partition Formatting NOS partition (NTFS) Copying W32 files The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen. I can't load the OS until I get past this part. I have already tried: Burning multiple copies and versions of the ServerGuide CD Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something Has anybody else seen this? I'm really at a loss here. EDIT: I found another person who has the exact same problem as me: http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14451763

    Read the article

  • How to configure Farsun USB barcode scanner to not auto-trigger

    - by David Grayson
    At my company we have several USB barcode scanners. I'm not sure exactly what model they are, but I think they are the FG9800 from Farsun because that's what they look like on the exterior. They came with a programming manual that is very similar to this document from the Farsun website. When I scan the "Output Firmware Version" barcode, my scanner types the following into the computer: Farsun V2.00 2011-01-01 Is it possible to configure these scanners so they only read barcodes in response to the trigger button being pressed? I don't want them to automatically read barcodes. Additionally, I want this setting to be remembered while the scanner is turned off. Since this scanner only has a USB port, the only way to configure it that I know of is to scan bar codes from the manual (or make your own). I have tried scanning the configuration bar codes for Single Scan (013300), Single Scan No Trigger (013301), and Laser/CCD Timeout - 5 Seconds (0134005) from this document. Sometimes (but not often) this puts the scanner in to the right mode, where it only scans when the button is pressed. Unfortunately, the scanner seems to always leave this mode when it is power cycled. I have also scanned the "Reset Configuration To Defaults" barcode (0B) many times. We have three different scanners like this and I have not been able to successfully configure any of them. If the things I want are not possible with these Farsun-based scanners, is there some other scanner we can use?

    Read the article

  • How to bypass resume from hibernate

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • 'Cannot get iis pickup directory' in Windows Server 2012

    - by Meat Popcicle
    Our system moved from Windows Server 2003(Enterprise SP2) & IIS 6. And new system is Windows Server 2012(Standard) and IIS 6(for smtp mail) & 8. I copied all of web application files and IIS settings, another function is ok but.. email system is something wrong. for example, --------------------------------------------------------------------------------------- exception: system.Net.Mail.SmtpException: cannot get iis pickup directory. line 284: SendMail sendmail = new SendMail(); line 285: sendmail.GetSendMail(messagefrom, Useremail, mailsubject, message); stack trace: [SmtpException: cannot get iis pickup directory.] System.Net.Mail.IisPickupDirectory.GetPickupDirectory() +1894 System.Net.Mail.SmtpClient.Send(MailMessage message) +1956518 CommonDll.SendMail.GetSendMail(String messagefrom, String Useremail, String mailsubject, String message) +466 ASP.common_users_courserecordadd_aspx.AddBtn_Click(Object sender, EventArgs e) in d:\"sourcefile.aspx":285 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +140 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981 Microsoft .NET Framework v:2.0.50727.6407; ASP.NET v:2.0.50727.6387 --------------------------------------------------------------------------------------- in Develop server(2008 R2 Ent SP1, IIS6 & 7.5), it works well. confused.

    Read the article

  • Blank desktop when logging into a Virtualized Windows 2008 Terminal Server?

    - by Rachel
    We have a Virtualized Terminal Server running Windows Server 2008. When the admin user logs in, everything is fine. When anyone else logs in, their desktop and start menu is blank (they have the taskbar, start button, and quick launch links though). If I go into Windows Explorer, I can see icons in their desktop folder (although the icon image is missing and it is just displaying the generic icon), but can't run any of them. If I login with a user that is part of the Administrator group in Active directory, I get the same behavior except I can launch the programs found in the Desktop Folder of Windows Explorer. I cannot drag these items out onto the desktop though - The cursor doesn't allow me to drop them. From Task Manager I can see that explorer.exe and dwm.exe are both running. The Authenticated Users and Interactive groups are both under the Users group, along with our network's Domain Users group. Does anyone know why this is happening and how I can fix it? Also, not sure if it's related but about 1 in every 3 logins just hangs at a completely blank blue screen (no start button, taskbar, or quick launch buttons) and needs to be disconnected / reset by an admin. Edit I just noticed that the desktop itself doesn't even respond to click events. It's almost like the entire desktop is missing. At first I thought it didn't respond to right-click events because of an AD policy, but then I noticed if you open the Start Menu and click the desktop, the start menu doesn't shut like it should

    Read the article

  • Virtual Machines and Automatic Software Updates

    - by Zian Choy
    It's obvious that one's main computer should always be have all the latest security patches and most people don't blink an eye when Microsoft Update installs non-security updates. In the land of virtual machines, I've run into 2 problems with automatic updates: The virtual machines are only run when needed. Only Windows virtual machines seem to patch themselves. To elaborate on #1, I generally make a virtual machine with a purpose in mind. For example, when I needed an old copy of Internet Explorer to reproduce a bug in RSS Bandit, I had a Virtual PC named RSS Bandit. The machine only stayed running for a few minutes at a time. Consequently, there is no downtime for the machine to download updates at 3 AM. To elaborate on #2, I've noticed that if I haven't run a Windows virtual machine in a while, then the moment I log in, the computer frantically downloads updates and within seconds, if I click the Start button, there is a little orange shield next to the "Shutdown" button. However, I ran a freshly created Ubuntu VM for several hours today with hundreds of updates pending and it seemed to never download any of them or install any of them. Is there any reason to be concerned about running VMs with dozens of security holes? If I should be concerned, then is there any way to get Ubuntu to download and install updates rather than just advertising a long list of updates to download next century? I've already tried telling Ubuntu to automatically download and install updates.

    Read the article

  • Can't get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

    - by Kyle Noland
    I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue: Set the date and Time Detect the IBM ServeRAID card and install the latest firmware Clear the hard disks Set up the RAID array The next step is format the NOS partition. I select my partition size and the utility goes through the following steps: Creating NOS partition Formatting NOS partition (NTFS) Copying W32 files The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen. I can't load the OS until I get past this part. I have already tried: Burning multiple copies and versions of the ServerGuide CD Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something Has anybody else seen this? I'm really at a loss here.

    Read the article

  • SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

    - by Dan
    I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

    Read the article

  • What is the collaborative screen shot/diagramming application recently featured on Hacker News and p

    - by wonsungi
    A few days ago, I saw this video for a screen capture application. I'm pretty sure I followed a link from Hacker News, possibly to a Life Hacker article. The video was very short, but demonstrated how the application could be used: The application was basically a movable/resize-able view port with a button. When the button is pressed, the contents of the view port are saved to an image (basically a screen capture.) The interesting thing is what you could do after that point. One of the specific examples from the video browsed to Google maps street view, grabbed a photo of an intersection, then scribbled notes about where to meet and where the restaurant was in colored "marker." Another example shown was grabbing a house layout from from CAD tool, then scribbling notes on it. The last part of the video showed several possible uses being scrolled through the application's view port. Now, it seemed it was very easy to share these images with other people because there was some type of integration, either with their own site and/or common social websites/chat services. The application was shown running on both Windows and Mac. edit: I think there was an iPhone app, as well. Anyone know what this application is? I tried searching Google, Hacker News, and Life Hacker already. It is not Jing.

    Read the article

  • BlazeDS first response is VERY SLOW

    - by chibban
    Hi everyone, I have a very strange an annoying problem: I have an appliaction written in Flex 3, with BlazeDS 3.2 and Java in the backend. I'm actually using a portal (liferay) to display portlets that contain Flex movies. When I hit a refresh button on my page, all the Flex movies send a RemoteObject request to the server (using BlazeDS), which should go to java classes and invoke a method (standard BlazeDS usage I 'm guessing). I'm experiencing VERY slow response (14 minutes) on the first hit, while the following hits are much faster. I've enabled the BlazeDS logging (logging level="All") and I also have debug prints coming from my java classes. I also use the "showBusyCursor" attribute for the RemoteObject - so I can see indication of the request being sent from the flex movie. Here is what I see: I hit the refresh button Each movie invokes a RemoteObject request I see a busy sign - in all the movies I see nothing in the log - no BlazeDS prints and no Java prints Wait 14 minutes or so I see BlazeDS prints followed by Java prints I see data populating my flex movies. The really weird thing is that I have the same "application" installed in 4 different computers (on my laptop and in 3 other unix machines), 3 of these installations work well (good response times) and only 1 has the issue I'm describing. I've tried many things, but everything failed. I'd be really happy to get some advice on this. Thanks

    Read the article

  • How to bypass resume from hibernate [closed]

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

    - by Kairan
    Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

    Read the article

  • Copying SD Cards with "LaCie d2 Network"

    - by rjstelling
    The LaCie d2 Network has a feature where by you can attach a USB drive and press the blue button at the from and it will copy the drive contents (no computer required). (See this review for more info). USB 2.0 and eSATA ports are also provided but these are not designed for extending the d2 Network's storage. Rather, they allow you to connect portable drives for uploading their data to the d2 Network directly. The process is quite slick, too: just plug in a drive and press the big blue button on the front of the unit to trigger an immediate upload. This copies over everything on the external device and seems ideal for camera use. Is it possible to use an microSD or SD card adapter (like the Kingston MobileLite 9-in-1) and copy the contents of the card? I'm assuming the card reader just "looks like" a normal USB flash drive the computer or (in this case) LaCie d2 Network. Is this assumption correct? Do you know any reason why this won't work?

    Read the article

  • can't properly shutdown ubuntu and sound problem on HP mini 311 netbook

    - by Viele
    hi, I recently bought a HP mini 311 netbook. I replaced its harddrive and installed ubuntu 10.04. Since then, I have encountered some very strange problem with its sound and shutdown/reboot. At times, when I start the computer, it will have no sound, on the GUI the sound is at max, but no sound is available. This sometimes also happen after after upgrades, hibernate, and toggling the wireless radio button. Strangely, when the sound is out the device will also refuse to be shutdown. If I shutdown the computer using the GUI, it will simply go back to the log in screen without actually shutting down. If I use "sudo shutdown 0", the computer will hang on the loading screen of the shut down process. I had to force the pc to shutdown by holding the power button down. usually (probably always) after I force a turn-off then start off again. the sound and shutdown become normal. I wonder if anyone have clues regarding to the cause of this problem. This the info about the computer: 1) installed ubuntu 10.04LTS RC, later upgraded to formal released version. 2) cat /proc/asound/version == "Advanced Linux Sound Architecture Driver Version 1.0.21." however, when doing 'alsaconf' the version displayed is 1.0.23 any help is appreciated. Thanks

    Read the article

  • Why do I have problems downloading some iPhone attachments from Exchange?

    - by CT
    Lately I have been getting an increasing number of complaints regarding users not being able to download attachments synced from Exchange with their iPhone. The iPhones in question are either 3G or 3GS with firmware 3.0 or later. Exchange 2007. The majority of messages come in just fine. Some however display: "This message has not been downloaded from the server" where the email's text normally should be. At the bottom of the email, it states: "This message is only partially downloaded." It has a button labeled "Download remaining 0 bytes." If you click this button, it states that it is loading and then reverts to the same screen. The odd part is that this only affects some emails. Most come in fine with attachments working. I've taken the same email that was not working on my iPhone. Sent it to a gmail account that my iPhone had access to. The message and attachment opened fine. Any ideas of possible causes I could look into? Thanks.

    Read the article

  • IIS Manager - Connect to Another Server (Win7 to Win2008 server)

    - by Matt
    I am running Windows 7 Ultimate. If I open up IIS Manager, I see a list of "connections" on the left hand side. In previous versions, I would be able to select an option to "connect to another server" or "connect to another machine", but there is no such option visible anywhere here. The only thing in the list is my local machine. Even in the address bar, if I manually type in the server location (\servername, even tried just servername), nothing happens (it just reverts back to my current local computer) The documentation at http://technet.microsoft.com/en-us/library/cc732466%28WS.10%29.aspx seems to imply the very same steps... but there is just no button or menu option anywhere to do this. Am I missing something? I'm not even seeing a grayed out menu option. EDIT: Under the "File" menu, I see 2 options: Save Connections (grayed out) Exit Under the "Connections" pane, I see 1 button, grayed out. When I hover the mouse, it simply says "Up", appears to be usable if I browse into an element in my local computers IIS settings If I right click inside the pane itself, I see Refresh Add website (to the current host) Start Stop Rename Switch to Content View UPDATE: I downloaded and installed the Remote Server Administration tools from http://www.microsoft.com/downloads/details.aspx?FamilyID=7D2F6AD7-656B-4313-A005-4E344E43997D&displaylang=en, and I enabled everything listed under "Remote Server Administration Tools" under "Turn Windows Features On or Off". Still nothing.

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Cannot get Windows snipping tool to auto run with AutoHotKey

    - by jasondavis
    I am trying to get Windows 7 sniping tool to run when I hit my PRINTSCREEN keyboard button with AUTOHOTKEY. I have been unsuccessful so far though. Here is what I have for the AutoHotKey script. I have tried this PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool And all those give me this error when I hit the PRINTSCREEN button... It basicly says it cannot find the file, however the file path seems to be correct, I can copy paste it into a window and it opens the snipping tool, any ideas why it will not work? Here is the full code to my AHK file... ; ; AutoHotkey Version: 1.x ; Language: English ; Platform: Win7 ; Author: Jason Davis <friendproject@> ; ; Script Function: ; Template script (you can customize this template by editing "ShellNew\Template.ahk" in your Windows folder) ; #NoEnv ; Recommended for performance and compatibility with future AutoHotkey releases. SendMode Input ; Recommended for new scripts due to its superior speed and reliability. SetWorkingDir %A_ScriptDir% ; Ensures a consistent starting directory. /* PRINTSCREEN = Will run Windows 7 snipping tool */ PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe return

    Read the article

  • Windows 2003 R2 zip program blocking EXE file

    - by Harvey Kwok
    I have a Windows 2003 R2 Enterprise Edition SP2 32-bit machine with all latest patch (as of 1-6-2011). It's a VM. I have a zip file, including a pdf file, a txt file and a exe file. If I copy the zip file onto the machine via a shared network drive, I can unzip all the files properly without problems. If I put the zip file on my web server and then I download it from there, I can only unzip the pdf file and txt file. The exe file is silently ignored. I searched the web and found somebody reporting similar issue on XP. If I right click on the zip file downloaded from the web server, at the bottom of the general page, it has a warning message saying that "This file came from antoher computer and might be blocked to help protect this computer" I understand that I can solve the problem by simply clicking the "Unblock" button and extract the file again. The things that bothering me is that why the warning message says "might be blocked"? I tried downloading the same zip file from the same web server on to my Windows 7 box with latest patch. It also shows the same warning message. However, even with the warning message, I can extract all the files properly without clicking the "Unblock" button. Is it a bug in Windows 2003 R2 SP1? Is there any security settings controlling this? How likely will the end user seeing this problem? I want to dig into this because I am worrying people downloading my zip file from my web server might see similar problems. The first thought coming to the user's mind will be the zip file is somehow corrupted. Honestly, I didn't know this "Unblock" feature in Windows before I run into this problem. EDIT I just tried it on another Windows 2003 R2 SP1 machine. The zip program doesn't block the EXE file on that machine either. Both Windows 2003 R2 SP1 machines are joining to the same forest.

    Read the article

  • Getting old bluetooth headset out of standby on Windows 7

    - by luagh45
    I think this is the problem, and if not, I'm open to suggestions. I have an old Jabra BT200 that I used to use on my phone. When a phone call was coming in it would beep using its own noises (meaning the phone never rang inside the headset) and then I could push the 'answer/hang up' button and sound and mic would start working. I have now paired it with Windows 7, and it looks good. Under the playback menu I have 'Bluetooth Hands free Audio / Jabra BT200 (Mono Audio) / Ready', and under the recording menu I have 'Bluetooth Audio Input Device / Jabra BT200 (Mono Audio) / Ready'. However when I try to test the speakers Windows sends a sound, but I never hear it, and when I talk in the mic, Windows never hears me. If I right click either the Bluetooth mic or speakers there's an option to 'Connect', but it's grayed out and I cannot click it. As the final piece of knowledge I have, my headset blinks once every 3 seconds when it's in standby and I can't get that to change. If everything was working it should blink once every second at which point I think all of my problems would be fixed. Hence my issue: I can't seem to get my headset out of standby. On my headset I've tried sending it test noises and then pressing the 'Answer' button, but still nothing. The headset beeps when I press it, so it works, it just doesn't ever come out of standby. Is there maybe some way to trick my headset into thinking it's getting a phone call from my computer?

    Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >