Search Results

Search found 9471 results on 379 pages for 'technology tid bits'.

Page 336/379 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

• The Great Divorce

  - by BlackRabbitCoder

  I have a confession to make: I've been in an abusive relationship for more than 17 years now.  Yes, I am not ashamed to admit it, but I'm finally doing something about it. I met her in college, she was new and sexy and amazingly fast -- and I'd never met anything like her before.  Her style and her power captivated me and I couldn't wait to learn more about her.  I took a chance on her, and though I learned a lot from her -- and will always be grateful for my time with her -- I think it's time to move on. Her name was C++, and she so outshone my previous love, C, that any thoughts of going back evaporated in the heat of this new romance.  She promised me she'd be gentle and not hurt me the way C did.  She promised me she'd clean-up after herself better than C did.  She promised me she'd be less enigmatic and easier to keep happy than C was.  But I was deceived.  Oh sure, as far as truth goes, it wasn't a complete lie.  To some extent she was more fun, more powerful, safer, and easier to maintain.  But it just wasn't good enough -- or at least it's not good enough now. I loved C++, some part of me still does, it's my first-love of programming languages and I recognize its raw power, its blazing speed, and its improvements over its predecessor.  But with today's hardware, at speeds we could only dream to conceive of twenty years ago, that need for speed -- at the cost of all else -- has died, and that has left my feelings for C++ moribund. If I ever need to write an operating system or a device driver, then I might need that speed.  But 99% of the time I don't.  I'm a business-type programmer and chances are 90% of you are too, and even the ones who need speed at all costs may be surprised by how much you sacrifice for that.   That's not to say that I don't want my software to perform, and it's not to say that in the business world we don't care about speed or that our job is somehow less difficult or technical.  There's many times we write programs to handle millions of real-time updates or handle thousands of financial transactions or tracking trading algorithms where every second counts.  But if I choose to write my code in C++ purely for speed chances are I'll never notice the speed increase -- and equally true chances are it will be far more prone to crash and far less easy to maintain.  Nearly without fail, it's the macro-optimizations you need, not the micro-optimizations.  If I choose to write a O(n2) algorithm when I could have used a O(n) algorithm -- that can kill me.  If I choose to go to the database to load a piece of unchanging data every time instead of caching it on first load -- that too can kill me.  And if I cross the network multiple times for pieces of data instead of getting it all at once -- yes that can also kill me.  But choosing an overly powerful and dangerous mid-level language to squeeze out every last drop of performance will realistically not make stock orders process any faster, and more likely than not open up the system to more risk of crashes and resource leaks. And that's when my love for C++ began to die.  When I noticed that I didn't need that speed anymore.  That that speed was really kind of a lie.  Sure, I can be super efficient and pack bits in a byte instead of using separate boolean values.  Sure, I can use an unsigned char instead of an int.  But in the grand scheme of things it doesn't matter as much as you think it does.  The key is maintainability, and that's where C++ failed me.  I like to tell the other developers I work with that there's two levels of correctness in coding: Is it immediately correct? Will it stay correct? That is, you can hack together any piece of code and make it correct to satisfy a task at hand, but if a new developer can't come in tomorrow and make a fairly significant change to it without jeopardizing that correctness, it won't stay correct. Some people laugh at me when I say I now prefer maintainability over speed.  But that is exactly the point.  If you focus solely on speed you tend to produce code that is much harder to maintain over the long hall, and that's a load of technical debt most shops can't afford to carry and end up completely scrapping code before it's time.  When good code is written well for maintainability, though, it can be correct both now and in the future. And you know the best part is?  My new love is nearly as fast as C++, and in some cases even faster -- and better than that, I know C# will treat me right.  Her creators have poured hundreds of thousands of hours of time into making her the sexy beast she is today.  They made her easy to understand and not an enigmatic mess.  They made her consistent and not moody and amorphous.  And they made her perform as fast as I care to go by optimizing her both at compile time and a run-time. Her code is so elegant and easy on the eyes that I'm not worried where she will run to or what she'll pull behind my back.  She is powerful enough to handle all my tasks, fast enough to execute them with blazing speed, maintainable enough so that I can rely on even fairly new peers to modify my work, and rich enough to allow me to satisfy any need.  C# doesn't ask me to clean up her messes!  She cleans up after herself and she tries to make my life easier for me by taking on most of those optimization tasks C++ asked me to take upon myself.  Now, there are many of you who would say that I am the cause of my own grief, that it was my fault C++ didn't behave because I didn't pay enough attention to her.  That I alone caused the pain she inflicted on me.  And to some extent, you have a point.  But she was so high maintenance, requiring me to know every twist and turn of her vast and unrestrained power that any wrong term or bout of forgetfulness was met with painful reminders that she wasn't going to watch my back when I made a mistake.  But C#, she loves me when I'm good, and she loves me when I'm bad, and together we make beautiful code that is both fast and safe. So that's why I'm leaving C++ behind.  She says she's changing for me, but I have no interest in what C++0x may bring.  Oh, I'll still keep in touch, and maybe I'll see her now and again when she brings her problems to my door and asks for some attention -- for I always have a soft spot for her, you see.  But she's out of my house now.  I have three kids and a dog and a cat, and all require me to clean up after them, why should I have to clean up after my programming language as well?

  Read the article

• Deterministic/Consistent Unique Masking

  - by Dinesh Rajasekharan-Oracle

  One of the key requirements while masking data in large databases or multi database environment is to consistently mask some columns, i.e. for a given input the output should always be the same. At the same time the masked output should not be predictable. Deterministic masking also eliminates the need to spend enormous amount of time spent in identifying data relationships, i.e. parent and child relationships among columns defined in the application tables. In this blog post I will explain different ways of consistently masking the data across databases using Oracle Data Masking and Subsetting The readers of post should have minimal knowledge on Oracle Enterprise Manager 12c, Application Data Modeling, Data Masking concepts. For more information on these concepts, please refer to Oracle Data Masking and Subsetting document Oracle Data Masking and Subsetting 12c provides four methods using which users can consistently yet irreversibly mask their inputs. 1. Substitute 2. SQL Expression 3. Encrypt 4. User Defined Function SUBSTITUTE The substitute masking format replaces the original value with a value from a pre-created database table. As the method uses a hash based algorithm in the back end the mappings are consistent. For example consider DEPARTMENT_ID in EMPLOYEES table is replaced with FAKE_DEPARTMENT_ID from FAKE_TABLE. The substitute masking transformation that all occurrences of DEPARTMENT_ID say ‘101’ will be replaced with ‘502’ provided same substitution table and column is used , i.e. FAKE_TABLE.FAKE_DEPARTMENT_ID. The following screen shot shows the usage of the Substitute masking format with in a masking definition: Note that the uniqueness of the masked value depends on the number of columns being used in the substitution table i.e. if the original table contains 50000 unique values, then for the masked output to be unique and deterministic the substitution column should also contain 50000 unique values without which only consistency is maintained but not uniqueness. SQL EXPRESSION SQL Expression replaces an existing value with the output of a specified SQL Expression. For example while masking an EMPLOYEES table the EMAIL_ID of an employee has to be in the format EMPLOYEE’s [email protected] while FIRST_NAME and LAST_NAME are the actual column names of the EMPLOYEES table then the corresponding SQL Expression will look like %FIRST_NAME%||’.’||%LAST_NAME%||’@COMPANY.COM’. The advantage of this technique is that if you are masking FIRST_NAME and LAST_NAME of the EMPLOYEES table than the corresponding EMAIL ID will be replaced accordingly by the masking scripts. One of the interesting aspect’s of a SQL Expressions is that you can use sub SQL expressions, which means that you can write a nested SQL and use it as SQL Expression to address a complex masking business use cases. SQL Expression can also be used to consistently replace value with hashed value using Oracle’s PL/SQL function ORA_HASH. The following SQL Expression will help in the previous example for replacing the DEPARTMENT_IDs with a hashed number ORA_HASH (%DEPARTMENT_ID%, 1000) The following screen shot shows the usage of encrypt masking format with in the masking definition: ORA_HASH takes three arguments: 1. Expression which can be of any data type except LONG, LOB, User Defined Type [nested table type is allowed]. In the above example I used the Original value as expression. 2. Number of hash buckets which can be number between 0 and 4294967295. The default value is 4294967295. You can also co-relate the number of hash buckets to a range of numbers. In the above example above the bucket value is specified as 1000, so the end result will be a hashed number in between 0 and 1000. 3. Seed, can be any number which decides the consistency, i.e. for a given seed value the output will always be same. The default seed is 0. In the above SQL Expression a seed in not specified, so it to 0. If you have to use a non default seed then the function will look like. ORA_HASH (%DEPARTMENT_ID%, 1000, 1234 The uniqueness depends on the input and the number of hash buckets used. However as ORA_HASH uses a 32 bit algorithm, considering birthday paradox or pigeonhole principle there is a 0.5 probability of collision after 232-1 unique values. ENCRYPT Encrypt masking format uses a blend of 3DES encryption algorithm, hashing, and regular expression to produce a deterministic and unique masked output. The format of the masked output corresponds to the specified regular expression. As this technique uses a key [string] to encrypt the data, the same string can be used to decrypt the data. The key also acts as seed to maintain consistent outputs for a given input. The following screen shot shows the usage of encrypt masking format with in the masking definition: Regular Expressions may look complex for the first time users but you will soon realize that it’s a simple language. There are many resources in internet, oracle documentation, oracle learning library, my oracle support on writing a Regular Expressions, out of all the following My Oracle Support document helped me to get started with Regular Expressions: Oracle SQL Support for Regular Expressions[Video](Doc ID 1369668.1) USER DEFINED FUNCTION [UDF] User Defined Function or UDF provides flexibility for the users to code their own masking logic in PL/SQL, which can be called from masking Defintion. The standard format of an UDF in Oracle Data Masking and Subsetting is: Function udf_func (rowid varchar2, column_name varchar2, original_value varchar2) returns varchar2; Where • rowid is the row identifier of the column that needs to be masked • column_name is the name of the column that needs to be masked • original_value is the column value that needs to be masked You can achieve deterministic masking by using Oracle’s built in hash functions like, ORA_HASH, DBMS_CRYPTO.MD4, DBMS_CRYPTO.MD5, DBMS_UTILITY. GET_HASH_VALUE.Please refers to the Oracle Database Documentation for more information on the Oracle Hash functions. For example the following masking UDF generate deterministic unique hexadecimal values for a given string input: CREATE OR REPLACE FUNCTION RD_DUX (rid varchar2, column_name varchar2, orig_val VARCHAR2) RETURN VARCHAR2 DETERMINISTIC PARALLEL_ENABLE IS stext varchar2 (26); no_of_characters number(2); BEGIN no_of_characters:=6; stext:=substr(RAWTOHEX(DBMS_CRYPTO.HASH(UTL_RAW.CAST_TO_RAW(text),1)),0,no_of_characters); RETURN stext; END; The uniqueness depends on the input and length of the string and number of bits used by hash algorithm. In the above function MD4 hash is used [denoted by argument 1 in the DBMS_CRYPTO.HASH function which is a 128 bit algorithm which produces 2^128-1 unique hashed values , however this is limited by the length of the input string which is 6, so only 6^6 unique values will be generated. Also do not forget about the birthday paradox/pigeonhole principle mentioned earlier in this post. An another example is to consistently replace characters or numbers preserving the length and special characters as shown below: CREATE OR REPLACE FUNCTION RD_DUS(rid varchar2,column_name varchar2,orig_val VARCHAR2) RETURN VARCHAR2 DETERMINISTIC PARALLEL_ENABLE IS stext varchar2(26); BEGIN DBMS_RANDOM.SEED(orig_val); stext:=TRANSLATE(orig_val,'ABCDEFGHILKLMNOPQRSTUVWXYZ',DBMS_RANDOM.STRING('U',26)); stext:=TRANSLATE(stext,'abcdefghijklmnopqrstuvwxyz',DBMS_RANDOM.STRING('L',26)); stext:=TRANSLATE(stext,'0123456789',to_char(DBMS_RANDOM.VALUE(1,9))); stext:=REPLACE(stext,'.','0'); RETURN stext; END; The following screen shot shows the usage of an UDF with in a masking definition: To summarize, Oracle Data Masking and Subsetting helps you to consistently mask data across databases using one or all of the methods described in this post. It saves the hassle of identifying the parent-child relationships defined in the application table. Happy Masking

  Read the article

• Use a Fake Http Channel to Unit Test with HttpClient

  - by Steve Michelotti

  Applications get data from lots of different sources. The most common is to get data from a database or a web service. Typically, we encapsulate calls to a database in a Repository object and we create some sort of IRepository interface as an abstraction to decouple between layers and enable easier unit testing by leveraging faking and mocking. This works great for database interaction. However, when consuming a RESTful web service, this is is not always the best approach. The WCF Web APIs that are available on CodePlex (current drop is Preview 3) provide a variety of features to make building HTTP REST services more robust. When you download the latest bits, you’ll also find a new HttpClient which has been updated for .NET 4.0 as compared to the one that shipped for 3.5 in the original REST Starter Kit. The HttpClient currently provides the best API for consuming REST services on the .NET platform and the WCF Web APIs provide a number of extension methods which extend HttpClient and make it even easier to use. Let’s say you have a client application that is consuming an HTTP service – this could be Silverlight, WPF, or any UI technology but for my example I’ll use an MVC application: 1: using System; 2: using System.Net.Http; 3: using System.Web.Mvc; 4: using FakeChannelExample.Models; 5: using Microsoft.Runtime.Serialization; 6:   7: namespace FakeChannelExample.Controllers 8: { 9: public class HomeController : Controller 10: { 11: private readonly HttpClient httpClient; 12:   13: public HomeController(HttpClient httpClient) 14: { 15: this.httpClient = httpClient; 16: } 17:   18: public ActionResult Index() 19: { 20: var response = httpClient.Get("Person(1)"); 21: var person = response.Content.ReadAsDataContract<Person>(); 22:   23: this.ViewBag.Message = person.FirstName + " " + person.LastName; 24: 25: return View(); 26: } 27: } 28: } On line #20 of the code above you can see I’m performing an HTTP GET request to a Person resource exposed by an HTTP service. On line #21, I use the ReadAsDataContract() extension method provided by the WCF Web APIs to serialize to a Person object. In this example, the HttpClient is being passed into the constructor by MVC’s dependency resolver – in this case, I’m using StructureMap as an IoC and my StructureMap initialization code looks like this: 1: using StructureMap; 2: using System.Net.Http; 3:   4: namespace FakeChannelExample 5: { 6: public static class IoC 7: { 8: public static IContainer Initialize() 9: { 10: ObjectFactory.Initialize(x => 11: { 12: x.For<HttpClient>().Use(() => new HttpClient("http://localhost:31614/")); 13: }); 14: return ObjectFactory.Container; 15: } 16: } 17: } My controller code currently depends on a concrete instance of the HttpClient. Now I *could* create some sort of interface and wrap the HttpClient in this interface and use that object inside my controller instead – however, there are a few why reasons that is not desirable: For one thing, the API provided by the HttpClient provides nice features for dealing with HTTP services. I don’t really *want* these to look like C# RPC method calls – when HTTP services have REST features, I may want to inspect HTTP response headers and hypermedia contained within the message so that I can make intelligent decisions as to what to do next in my workflow (although I don’t happen to be doing these things in my example above) – this type of workflow is common in hypermedia REST scenarios. If I just encapsulate HttpClient behind some IRepository interface and make it look like a C# RPC method call, it will become difficult to take advantage of these types of things. Second, it could get pretty mind-numbing to have to create interfaces all over the place just to wrap the HttpClient. Then you’re probably going to have to hard-code HTTP knowledge into your code to formulate requests rather than just “following the links” that the hypermedia in a message might provide. Third, at first glance it might appear that we need to create an interface to facilitate unit testing, but actually it’s unnecessary. Even though the code above is dependent on a concrete type, it’s actually very easy to fake the data in a unit test. The HttpClient provides a Channel property (of type HttpMessageChannel) which allows you to create a fake message channel which can be leveraged in unit testing. In this case, what I want is to be able to write a unit test that just returns fake data. I also want this to be as re-usable as possible for my unit testing. I want to be able to write a unit test that looks like this: 1: [TestClass] 2: public class HomeControllerTest 3: { 4: [TestMethod] 5: public void Index() 6: { 7: // Arrange 8: var httpClient = new HttpClient("http://foo.com"); 9: httpClient.Channel = new FakeHttpChannel<Person>(new Person { FirstName = "Joe", LastName = "Blow" }); 10:   11: HomeController controller = new HomeController(httpClient); 12:   13: // Act 14: ViewResult result = controller.Index() as ViewResult; 15:   16: // Assert 17: Assert.AreEqual("Joe Blow", result.ViewBag.Message); 18: } 19: } Notice on line #9, I’m setting the Channel property of the HttpClient to be a fake channel. I’m also specifying the fake object that I want to be in the response on my “fake” Http request. I don’t need to rely on any mocking frameworks to do this. All I need is my FakeHttpChannel. The code to do this is not complex: 1: using System; 2: using System.IO; 3: using System.Net.Http; 4: using System.Runtime.Serialization; 5: using System.Threading; 6: using FakeChannelExample.Models; 7:   8: namespace FakeChannelExample.Tests 9: { 10: public class FakeHttpChannel<T> : HttpClientChannel 11: { 12: private T responseObject; 13:   14: public FakeHttpChannel(T responseObject) 15: { 16: this.responseObject = responseObject; 17: } 18:   19: protected override HttpResponseMessage Send(HttpRequestMessage request, CancellationToken cancellationToken) 20: { 21: return new HttpResponseMessage() 22: { 23: RequestMessage = request, 24: Content = new StreamContent(this.GetContentStream()) 25: }; 26: } 27:   28: private Stream GetContentStream() 29: { 30: var serializer = new DataContractSerializer(typeof(T)); 31: Stream stream = new MemoryStream(); 32: serializer.WriteObject(stream, this.responseObject); 33: stream.Position = 0; 34: return stream; 35: } 36: } 37: } The HttpClientChannel provides a Send() method which you can override to return any HttpResponseMessage that you want. You can see I’m using the DataContractSerializer to serialize the object and write it to a stream. That’s all you need to do. In the example above, the only thing I’ve chosen to do is to provide a way to return different response objects. But there are many more features you could add to your own re-usable FakeHttpChannel. For example, you might want to provide the ability to add HTTP headers to the message. You might want to use a different serializer other than the DataContractSerializer. You might want to provide custom hypermedia in the response as well as just an object or set HTTP response codes. This list goes on. This is the just one example of the really cool features being added to the next version of WCF to enable various HTTP scenarios. The code sample for this post can be downloaded here.

  Read the article

• Visiting the Fire Station in Coromandel

  Hm, I just tried to remember how we actually came up with this cool idea... but it's already too blurred and it doesn't really matter after all. Anyway, if I remember correctly (IIRC), it happened during one of the Linux meetups at Mugg & Bean, Bagatelle where Ajay and I brought our children along and we had a brief conversation about how cool it would be to check out one of the fire stations here in Mauritius. We both thought that it would be a great experience and adventure for the little ones. An idea takes shape And there we go, down the usual routine these... having an idea, checking out the options and discussing who's doing what. Except this time, it was all up to Ajay, and he did a fantastic job. End of August, he told me that he got in touch with one of his friends which actually works as a fire fighter at the station in Coromandel and that there could be an option to come and visit them (soon). A couple of days later - Confirmed! Be there, and in time... What time? Anyway, doesn't really matter... Everything was settled and arranged. I asked the kids on Friday afternoon if they might be interested to see the fire engines and what a fire fighter is doing. Of course, they were all in! Getting up early on Sunday morning isn't really a regular exercise for all of us but everything went smooth and after a short breakfast it was time to leave. Where are we going? Are we there yet? Now, we are in Bambous. Why do you go this way? The kids were so much into it. Absolutely amazing to see their excitement. Are we there yet? Well, we went through the sugar cane fields towards Chebel and then down into the industrial zone at Coromandel. Honestly, I had a clue where the fire station is located but having Google Maps in reach that shouldn't be a problem in case that we might get lost. But my worries were washed away when our children guided us... "There! Over there are the fire engines! We have to turn left, dad." - No comment, the kids were right! As we were there a little bit too early, we parked the car and the kids started to explore the area and outskirts of the fire station. Some minutes later, as if we had placed an order a unit of two cars had to go out for an alarm and the kids could witness them leaving as closely as possible. Sirens on and wow!!! Ladder truck L32 - MAN truck with Rosenbauer built-up and equipment by Metz Taking the tour Ajay arrived shortly after that and guided us finally inside the station to meet with his pal. The three guys were absolutely well-prepared and showed us around in the hall, explaining that there two units out at the moment. But the ladder truck (with max. 32m expandable height) was still around we all got a great insight into the technique and equipment on the vehicle. It was amazing to see all three kids listening to Mambo as give some figures about the truck and how the fire fighters are actually it. The children and 'our' fire fighters of the day had great fun with the various fire engines Absolutely fantastic that the children were allowed to experience this - we had so much fun! Ajay's son brought two of his toy fire engines along, shared them with ours, and they all played very well together. As a parent it was really amazing to see them at such an ease. Enough theory Shortly afterwards the ladder truck was moved outside, got stabilised and ready to go for 'real-life' exercising. With the additional equipment of safety helmets, security belts and so on, we all got a first-hand impression about how it could be as a fire-fighter. Actually, I was totally amazed by the curiousity and excitement of my BWE. She was really into it and asked lots of interesting questions - in general but also technical. And while our fighters were busy with Ajay and family, I gave her some more details and explanations about the truck, the expandable ladder, the safety cage at the top and other equipment available. Safety first! No exceptions and always be prepared for the worst case... Also, the equipped has been checked prior to excuse - This is your life saver... Hooked up and ready to go... ...of course not too high. This is just a demonstration - and 32 meters above ground isn't for everyone. Well, after that it was me that had the asking looks on me, and I finally revealed to the local fire fighters that I was in the auxiliary fire brigade, more precisely in the hazard department, for more than 10 years. So not a professional fire fighter but at least a passionate and educated one as them. Inside the station Our fire fighters really took their time to explain their daily job to kids, provided them access to operation seat on the ladder truck and how the truck cabin is actually equipped with the different radios and so on. It was really a great time. Later on we had a brief tour through the building itself, and again all of our questions were answered. We had great fun and started to joke about bits and pieces. For me it was also very interesting to see the comparison between the fire station here in Mauritius and the ones I have been to back in Germany. Amazing to see them completely captivated in the play - the children had lots of fun! Also, that there are currently ten fire stations all over the island, plus two additional but private ones at the airport and at the harbour. The newest one is actually down in Black River on the west coast because the time from Quatre Bornes takes too long to have any chance of an effective alarm at all. IMHO, a very good decision as time is the most important factor in getting fire incidents under control. After all it was great experience for all of us, especially for the children to see and understand that their toy trucks are only copies of the real thing and that the job of a (professional) fire fighter is very important in our society. Don't forget that those guys run into the danger zone while you're trying to get away from it as much as possible. Another unit just came back from a grass fire - and shortly after they went out again. No time to rest, too much to do! Mauritian Fire Fighters now and (maybe) in the future... Thank you! It was an honour to be around! Thank you to Ajay for organising and arranging this Sunday morning event, and of course of Big Thank You to the three guys that took some time off to have us at the Fire Station in Coromandel and guide us through their daily job! And remember to call 115 in case of emergencies!

  Read the article

• External File Upload Optimizations for Windows Azure

  - by rgillen

  [Cross posted from here: http://rob.gillenfamily.net/post/External-File-Upload-Optimizations-for-Windows-Azure.aspx] I’m wrapping up a bit of the work we’ve been doing on data movement optimizations for cloud computing and the latest set of data yielded some interesting points I thought I’d share. The work done here is not really rocket science but may, in some ways, be slightly counter-intuitive and therefore seemed worthy of posting. Summary: for those who don’t like to read detailed posts or don’t have time, the synopsis is that if you are uploading data to Azure, block your data (even down to 1MB) and upload in parallel. Set your block size based on your source file size, but if you must choose a fixed value, use 1MB. Following the above will result in significant performance gains… upwards of 10x-24x and a reduction in overall file transfer time of upwards of 90% (eg, uploading a 1GB file averaged 46.37 minutes prior to optimizations and averaged 1.86 minutes afterwards). Detail: For those of you who want more detail, or think that the claims at the end of the preceding paragraph are over-reaching, what follows is information and code supporting these claims. As the title would indicate, these tests were run from our research facility pointing to the Azure cloud (specifically US North Central as it is physically closest to us) and do not represent intra-cloud results… we have performed intra-cloud tests and the overall results are similar in notion but the data rates are significantly different as well as the tipping points for the various block sizes… this will be detailed separately). We started by building a very simple console application that would loop through a directory and upload each file to Azure storage. This application used the shipping storage client library from the 1.1 version of the azure tools. The only real variation from the client library is that we added code to collect and record the duration (in ms) and size (in bytes) for each file transferred. The code is available here. We then created a directory that had a collection of files for the following sizes: 2KB, 32KB, 64KB, 128KB, 512KB, 1MB, 5MB, 10MB, 25MB, 50MB, 100MB, 250MB, 500MB, 750MB, and 1GB (50 files for each size listed). These files contained randomly-generated binary data and do not benefit from compression (a separate discussion topic). Our file generation tool is available here. The baseline was established by running the application described above against the directory containing all of the data files. This application uploads the files in a random order so as to avoid transferring all of the files of a given size sequentially and thereby spreading the affects of periodic Internet delays across the collection of results.  We then ran some scripts to split the resulting data and generate some reports. The raw data collected for our non-optimized tests is available via the links in the Related Resources section at the bottom of this post. For each file size, we calculated the average upload time (and standard deviation) and the average transfer rate (and standard deviation). As you likely are aware, transferring data across the Internet is susceptible to many transient delays which can cause anomalies in the resulting data. It is for this reason that we randomized the order of source file processing as well as executed the tests 50x for each file size. We expect that these steps will yield a sufficiently balanced set of results. Once the baseline was collected and analyzed, we updated the test harness application with some methods to split the source file into user-defined block sizes and then to upload those blocks in parallel (using the PutBlock() method of Azure storage). The parallelization was handled by simply relying on the Parallel Extensions to .NET to provide a Parallel.For loop (see linked source for specific implementation details in Program.cs, line 173 and following… less than 100 lines total). Once all of the blocks were uploaded, we called PutBlockList() to assemble/commit the file in Azure storage. For each block transferred, the MD5 was calculated and sent ensuring that the bits that arrived matched was was intended. The timer for the blocked/parallelized transfer method wraps the entire process (source file splitting, block transfer, MD5 validation, file committal). A diagram of the process is as follows: We then tested the affects of blocking & parallelizing the transfers by running the updated application against the same source set and did a parameter sweep on the block size including 256KB, 512KB, 1MB, 2MB, and 4MB (our assumption was that anything lower than 256KB wasn’t worth the trouble and 4MB is the maximum size of a block supported by Azure). The raw data for the parallel tests is available via the links in the Related Resources section at the bottom of this post. This data was processed and then compared against the single-threaded / non-optimized transfer numbers and the results were encouraging. The Excel version of the results is available here. Two semi-obvious points need to be made prior to reviewing the data. The first is that if the block size is larger than the source file size you will end up with a “negative optimization” due to the overhead of attempting to block and parallelize. The second is that as the files get smaller, the clock-time cost of blocking and parallelizing (overhead) is more apparent and can tend towards negative optimizations. For this reason (and is supported in the raw data provided in the linked worksheet) the charts and dialog below ignore source file sizes less than 1MB. (click chart for full size image) The chart above illustrates some interesting points about the results: When the block size is smaller than the source file, performance increases but as the block size approaches and then passes the source file size, you see decreasing benefit to the point of negative gains (see the values for the 1MB file size) For some of the moderately-sized source files, small blocks (256KB) are best As the size of the source file gets larger (see values for 50MB and up), the smallest block size is not the most efficient (presumably due, at least in part, to the increased number of blocks, increased number of individual transfer requests, and reassembly/committal costs). Once you pass the 250MB source file size, the difference in rate for 1MB to 4MB blocks is more-or-less constant The 1MB block size gives the best average improvement (~16x) but the optimal approach would be to vary the block size based on the size of the source file.    (click chart for full size image) The above is another view of the same data as the prior chart just with the axis changed (x-axis represents file size and plotted data shows improvement by block size). It again highlights the fact that the 1MB block size is probably the best overall size but highlights the benefits of some of the other block sizes at different source file sizes. This last chart shows the change in total duration of the file uploads based on different block sizes for the source file sizes. Nothing really new here other than this view of the data highlights the negative affects of poorly choosing a block size for smaller files.   Summary What we have found so far is that blocking your file uploads and uploading them in parallel results in significant performance improvements. Further, utilizing extension methods and the Task Parallel Library (.NET 4.0) make short work of altering the shipping client library to provide this functionality while minimizing the amount of change to existing applications that might be using the client library for other interactions.   Related Resources Source code for upload test application Source code for random file generator ODatas feed of raw data from non-optimized transfer tests Experiment Metadata Experiment Datasets 2KB Uploads 32KB Uploads 64KB Uploads 128KB Uploads 256KB Uploads 512KB Uploads 1MB Uploads 5MB Uploads 10MB Uploads 25MB Uploads 50MB Uploads 100MB Uploads 250MB Uploads 500MB Uploads 750MB Uploads 1GB Uploads Raw Data OData feeds of raw data from blocked/parallelized transfer tests Experiment Metadata Experiment Datasets Raw Data 256KB Blocks 512KB Blocks 1MB Blocks 2MB Blocks 4MB Blocks Excel worksheet showing summarizations and comparisons

  Read the article

• Combining Shared Secret and Username Token – Azure Service Bus

  - by Michael Stephenson

  As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also flow through a username token so that in your listening WCF service you will be able to identify who sent the message. This could either be in the form of an application or a user depending on how you want to use your token. Prerequisites Before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.UN.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our username token like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element. Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the username token bits in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use userNameAuthentication and you can see that I have created my own custom username token validator.   This setup means that WCF will hand off to my class for validating the username token details. I have also added the serviceSecurityAudit element to give me a simple auditing of access capability. My UsernamePassword Validator The below picture shows you the details of the username password validator class I have implemented. WCF will hand off to this class when validating the token and give me a nice way to check the token credentials against an on-premise store. You have all of the validation features with a non-service bus WCF implementation available such as validating the username password against active directory or ASP.net membership features or as in my case above something much simpler.   The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a username token over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding. Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the username token with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This is the normal configuration to use a shared secret for accessing a Service Bus endpoint.   Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF service but this time we have also set the ClientCredentials to use the appropriate username and password which will be flown through the service bus and to our service which will validate them.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and username token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.UN.zip

  Read the article

• Why Is Vertical Resolution Monitor Resolution so Often a Multiple of 360?

  - by Jason Fitzpatrick

  Stare at a list of monitor resolutions long enough and you might notice a pattern: many of the vertical resolutions, especially those of gaming or multimedia displays, are multiples of 360 (720, 1080, 1440, etc.) But why exactly is this the case? Is it arbitrary or is there something more at work? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Trojandestroy recently noticed something about his display interface and needs answers: YouTube recently added 1440p functionality, and for the first time I realized that all (most?) vertical resolutions are multiples of 360. Is this just because the smallest common resolution is 480×360, and it’s convenient to use multiples? (Not doubting that multiples are convenient.) And/or was that the first viewable/conveniently sized resolution, so hardware (TVs, monitors, etc) grew with 360 in mind? Taking it further, why not have a square resolution? Or something else unusual? (Assuming it’s usual enough that it’s viewable). Is it merely a pleasing-the-eye situation? So why have the display be a multiple of 360? The Answer SuperUser contributor User26129 offers us not just an answer as to why the numerical pattern exists but a history of screen design in the process: Alright, there are a couple of questions and a lot of factors here. Resolutions are a really interesting field of psychooptics meeting marketing. First of all, why are the vertical resolutions on youtube multiples of 360. This is of course just arbitrary, there is no real reason this is the case. The reason is that resolution here is not the limiting factor for Youtube videos – bandwidth is. Youtube has to re-encode every video that is uploaded a couple of times, and tries to use as little re-encoding formats/bitrates/resolutions as possible to cover all the different use cases. For low-res mobile devices they have 360×240, for higher res mobile there’s 480p, and for the computer crowd there is 360p for 2xISDN/multiuser landlines, 720p for DSL and 1080p for higher speed internet. For a while there were some other codecs than h.264, but these are slowly being phased out with h.264 having essentially ‘won’ the format war and all computers being outfitted with hardware codecs for this. Now, there is some interesting psychooptics going on as well. As I said: resolution isn’t everything. 720p with really strong compression can and will look worse than 240p at a very high bitrate. But on the other side of the spectrum: throwing more bits at a certain resolution doesn’t magically make it better beyond some point. There is an optimum here, which of course depends on both resolution and codec. In general: the optimal bitrate is actually proportional to the resolution. So the next question is: what kind of resolution steps make sense? Apparently, people need about a 2x increase in resolution to really see (and prefer) a marked difference. Anything less than that and many people will simply not bother with the higher bitrates, they’d rather use their bandwidth for other stuff. This has been researched quite a long time ago and is the big reason why we went from 720×576 (415kpix) to 1280×720 (922kpix), and then again from 1280×720 to 1920×1080 (2MP). Stuff in between is not a viable optimization target. And again, 1440P is about 3.7MP, another ~2x increase over HD. You will see a difference there. 4K is the next step after that. Next up is that magical number of 360 vertical pixels. Actually, the magic number is 120 or 128. All resolutions are some kind of multiple of 120 pixels nowadays, back in the day they used to be multiples of 128. This is something that just grew out of LCD panel industry. LCD panels use what are called line drivers, little chips that sit on the sides of your LCD screen that control how bright each subpixel is. Because historically, for reasons I don’t really know for sure, probably memory constraints, these multiple-of-128 or multiple-of-120 resolutions already existed, the industry standard line drivers became drivers with 360 line outputs (1 per subpixel). If you would tear down your 1920×1080 screen, I would be putting money on there being 16 line drivers on the top/bottom and 9 on one of the sides. Oh hey, that’s 16:9. Guess how obvious that resolution choice was back when 16:9 was ‘invented’. Then there’s the issue of aspect ratio. This is really a completely different field of psychology, but it boils down to: historically, people have believed and measured that we have a sort of wide-screen view of the world. Naturally, people believed that the most natural representation of data on a screen would be in a wide-screen view, and this is where the great anamorphic revolution of the ’60s came from when films were shot in ever wider aspect ratios. Since then, this kind of knowledge has been refined and mostly debunked. Yes, we do have a wide-angle view, but the area where we can actually see sharply – the center of our vision – is fairly round. Slightly elliptical and squashed, but not really more than about 4:3 or 3:2. So for detailed viewing, for instance for reading text on a screen, you can utilize most of your detail vision by employing an almost-square screen, a bit like the screens up to the mid-2000s. However, again this is not how marketing took it. Computers in ye olden days were used mostly for productivity and detailed work, but as they commoditized and as the computer as media consumption device evolved, people didn’t necessarily use their computer for work most of the time. They used it to watch media content: movies, television series and photos. And for that kind of viewing, you get the most ‘immersion factor’ if the screen fills as much of your vision (including your peripheral vision) as possible. Which means widescreen. But there’s more marketing still. When detail work was still an important factor, people cared about resolution. As many pixels as possible on the screen. SGI was selling almost-4K CRTs! The most optimal way to get the maximum amount of pixels out of a glass substrate is to cut it as square as possible. 1:1 or 4:3 screens have the most pixels per diagonal inch. But with displays becoming more consumery, inch-size became more important, not amount of pixels. And this is a completely different optimization target. To get the most diagonal inches out of a substrate, you want to make the screen as wide as possible. First we got 16:10, then 16:9 and there have been moderately successful panel manufacturers making 22:9 and 2:1 screens (like Philips). Even though pixel density and absolute resolution went down for a couple of years, inch-sizes went up and that’s what sold. Why buy a 19″ 1280×1024 when you can buy a 21″ 1366×768? Eh… I think that about covers all the major aspects here. There’s more of course; bandwidth limits of HDMI, DVI, DP and of course VGA played a role, and if you go back to the pre-2000s, graphics memory, in-computer bandwdith and simply the limits of commercially available RAMDACs played an important role. But for today’s considerations, this is about all you need to know. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• PASS Summit – looking back on my first time

  - by Fatherjack

    So I was lucky enough to get my first experience of PASS Summit this year and took some time beforehand to read some blogs and reference material to get an idea on what to do and how to get the best out of my visit. Having been to other conferences – technical and non-technical – I had a reasonable idea on the routine and what to expect in general. Here is a list of a few things that I have learned/remembered as the week has gone by. Wear comfortable shoes. This actually needs to be broadened to Take several pairs of comfortable shoes. You will be spending many many hours, for several days one after another. Having comfortable feet that can literally support you for the duration will make the week in general a whole lot better. Not only at the conference but getting to and from you could well be walking. In the evenings you will be walking around town and standing talking in various bars and clubs. Looking back, on some days I was on my feet for over 20 hours. Make friends. This is a given for the long term benefits it brings but there is also an immediate reward in being at a conference with a friend or two. Some events are bigger and more popular than others and some have the type of session that every single attendee will want to be in. This is great for those that get in but if you are in the bathroom or queuing for coffee and you miss out it sucks. Having a friend that can get in to a room and reserve you a seat is a great advantage to make sure you get the content that you want to see and still have the coffee that you need. Don’t go to every session you want to see This might sound counter intuitive and it relies on the sessions being recorded in some way to guarantee you don’t totally miss out. Both PASS Summit and SQL Bits sessions are recorded (summit is audio, SQLBits is video) and this means that if you get into a good conversation with someone over a coffee you don’t have to break it up to go to a session. Obviously there is a trade-off here and you need to decide on the tipping point for yourself but a conversation at a place like this could make a big difference to the next contract or employer you have or it might simply be great catching up with some friends you don’t see so often. Go to at least one session you don’t want to Again, this will seem to be contrary to normal logic but there is no reason why you shouldn’t learn about a part of SQL Server that isn’t part of your daily routine. Not only will you learn something new but you will also pick up on the feelings and attitudes of the people in the session. So, if you are a DBA, head off to a BI session and so on. You’ll hear BI speakers speaking to a BI audience and get to understand their point of view and reasoning for making the decisions they do. You will also appreciate the way that your decisions and instructions affect the way they have to work. This will help you a lot when you are on a project, working with multiple teams and make you all more productive. Socialise While you are at the conference venue, speak to people. Ask questions, be interested in whoever you are speaking to. You get chances to talk to new friends at breakfast, dinner and every break between sessions. The only people that might not talk to you would be speakers that are about to go and give a session, in most cases speakers like peace and quiet before going on stage. Other than that the people around you are just waiting for someone to talk to them so make the first move. There is a whole lot going on outside of the conference hours and you should make an effort to join in with some of this too. At karaoke evenings or just out for a quiet drink with a few of the people you meet at the conference. Either way, don’t be a recluse and hide in your room or be alone out in the town. Don’t talk to people Once again this sounds wrong but stay with me. I have spoken to a number of speakers since Summit 2013 finished and they have all mentioned the time it has taken them to move about the conference venue due to people stopping them for a chat or to ask a question. 45 minutes to walk from a session room to the speaker room in one case. Wow. While none of the speakers were upset about this sort of delay I think delegates should take the situation into account and possibly defer their question to an email or to a time when the person they want is clearly less in demand. Give them a chance to enjoy the conference in the same way that you are, they may actually want to go to a session or just have a rest after giving their session – talking for 75 minutes is hard work, taking an extra 45 minutes right after is unbelievable. I certainly hope that they get good feedback on their sessions and perhaps if you spoke to a speaker outside a session you can give them a mention in the ‘any other comments’ part of the feedback, just to convey your gratitude for them giving up their time and expertise for free. Say thank you I just mentioned giving the speakers a clear, visible ‘thank you’ in the feedback but there are plenty of people that help make any conference the success it is that would really appreciate hearing that their efforts are valued. People on the registration desk, volunteers giving schedule guidance and directions, people on the community zone are all volunteers giving their time to help you have the best experience possible. Send an email to PASS and convey your thoughts about the work that was done. Maybe you want to be a volunteer next time so you could enquire how you get into that position at the same time. This isn’t an exclusive list and you may agree or disagree with the points I have made, please add anything you think is good advice in the comments. I’d like to finish by saying a huge thank you to all the people involved in planning, facilitating and executing the PASS Summit 2013, it was an excellent event and I know many others think it was a totally worthwhile event to attend.

  Read the article

• Hosting and consuming WCF services without configuration files

  - by martinsj

  In this post, I'll demonstrate how to configure both the host and the client in code without the need for configuring services i the <system.serviceModel> section of the config-file. In fact, you don't need a  <system.serviceModel> section at all. What you'll do need (and want) sometimes, is the Uri of the service in the configuration file. Configuring the Uri of the the service is actually only needed for the client or when self-hosting, not when hosting in IIS. So, exactly What do we need to configure? The binding type and the binding constraints The metadata behavior Debug behavior You can of course configure even more, and even more if you want to, WCF is after all the king of configuration… As an example I'll be hosting and consuming a service that removes most of the default constraints for WCF-services, using a BasicHttpBinding. Of course, in regards to security, it is probably better to have some constraints on the server, but this is only a demonstration. The ServerConfig class in the code beneath is a static helper class that will be used in the examples. In this post, I’ll be using this helper-class for all configuration, for both the server and the client. In WCF, the  client and the server have both their own WCF-configuration. With this piece of code, they will be sharing the same configuration. 1: public static class ServiceConfig 2: { 3: public static Binding DefaultBinding 4: { 5: get 6: { 7: var binding = new BasicHttpBinding(); 8: Configure(binding); 9: return binding; 10: } 11: } 12:  13: public static void Configure(HttpBindingBase binding) 14: { 15: if (binding == null) 16: { 17: throw new ArgumentException("Argument 'binding' cannot be null. Cannot configure binding."); 18: } 19:  20: binding.SendTimeout = new TimeSpan(0, 0, 30, 0); // 30 minute timeout 21: binding.MaxBufferSize = Int32.MaxValue; 22: binding.MaxBufferPoolSize = 2147483647; 23: binding.MaxReceivedMessageSize = Int32.MaxValue; 24: binding.ReaderQuotas.MaxArrayLength = Int32.MaxValue; 25: binding.ReaderQuotas.MaxBytesPerRead = Int32.MaxValue; 26: binding.ReaderQuotas.MaxDepth = Int32.MaxValue; 27: binding.ReaderQuotas.MaxNameTableCharCount = Int32.MaxValue; 28: binding.ReaderQuotas.MaxStringContentLength = Int32.MaxValue; 29: } 30:  31: public static ServiceMetadataBehavior ServiceMetadataBehavior 32: { 33: get 34: { 35: return new ServiceMetadataBehavior 36: { 37: HttpGetEnabled = true, 38: MetadataExporter = {PolicyVersion = PolicyVersion.Policy15} 39: }; 40: } 41: } 42:  43: public static ServiceDebugBehavior ServiceDebugBehavior 44: { 45: get 46: { 47: var smb = new ServiceDebugBehavior(); 48: Configure(smb); 49: return smb; 50: } 51: } 52:  53:  54: public static void Configure(ServiceDebugBehavior behavior) 55: { 56: if (behavior == null) 57: { 58: throw new ArgumentException("Argument 'behavior' cannot be null. Cannot configure debug behavior."); 59: } 60: 61: behavior.IncludeExceptionDetailInFaults = true; 62: } 63: } Configuring the server There are basically two ways to host a WCF service, in IIS and self-hosting. When hosting a WCF service in a production environment using SOA architecture, you'll be most likely hosting it in IIS. When testing the service in integration tests, it's very handy to be able to self-host services in the unit-tests. In fact, you can share the the WCF configuration for self-hosted services and services hosted in IIS. And that is exactly what you want to do, testing the same configurations for test and production environments.   Configuring when Self-hosting When self-hosting, in order to start the service, you'll have to instantiate the ServiceHost class, configure the  service and open it. 1: // Create the service-host. 2: var host = new ServiceHost(typeof(MyService), endpoint); 3:  4: // Configure the binding 5: host.AddServiceEndpoint(typeof(IMyService), ServiceConfig.DefaultBinding, endpoint); 6:  7: // Configure metadata behavior 8: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 9:  10: // Configure debgug behavior 11: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 12: 13: // Start listening to the service 14: host.Open(); 15:  Configuring when hosting in IIS When you create a WCF service application with the wizard in Visual Studio, you'll end up with bits and pieces of code in order to get the service running: Svc-file with codebehind. A interface to the service Web.config In order to get rid of the configuration in the <system.serviceModel> section, which the wizard has generated for us, we must tell the service that we have a factory that will create the service for us. We do this by changing the markup for the svc-file: 1: <%@ ServiceHost Language="C#" Debug="true" Service="Namespace.MyService" Factory="Namespace.ServiceHostFactory" %> The markup tells IIS that we have a factory called ServiceHostFactory for this service. The service factory has a method we can override which will be called when someone asks IIS for the service. There are overloads we can override: 1: System.ServiceModel.ServiceHostBase CreateServiceHost(string constructorString, Uri[] baseAddresses) 2: System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 3:  In this example, we'll be using the last one, so our implementation looks like this: 1: public class ServiceHostFactory : System.ServiceModel.Activation.ServiceHostFactory 2: { 3:  4: protected override System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 5: { 6: var host = base.CreateServiceHost(serviceType, baseAddresses); 7: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 8: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 9: return host; 10: } 11: } 12:  1: public class ServiceHostFactory : System.ServiceModel.Activation.ServiceHostFactory 2: { 3: 4: protected override System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 5: { 6: var host = base.CreateServiceHost(serviceType, baseAddresses); 7: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 8: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 9: return host; 10: } 11: } 12: As you can see, we are using the same configuration helper we used when self-hosting. Now, when you have a factory, the <system.serviceModel> section of the configuration can be removed, because the section will be ignored when the service has a custom factory. If you want to configure something else in the config-file, one could configure in some other section.   Configuring the client Microsoft has helpfully created a ChannelFactory class in order to create a proxy client. When using this approach, you don't have generate those awfull proxy classes for the client. If you share the contracts with the server in it's own assembly like in the layer diagram under, you can share the same piece of code. The contracts in WCF are the interface to the service and if any, the datacontracts (custom types) the service depends on. Using the ChannelFactory with our configuration helper-class is very simple: 1: var identity = EndpointIdentity.CreateDnsIdentity("localhost"); 2: var endpointAddress = new EndpointAddress(endPoint, identity); 3: var factory = new ChannelFactory<IMyService>(DeployServiceConfig.DefaultBinding, endpointAddress); 4: using (var myService = new factory.CreateChannel()) 5: { 6: myService.Hello(); 7: } 8: factory.Close();   Happy configuration!

  Read the article

• OpenGL loading functions error [on hold]

  - by Ghilliedrone

  I'm new to OpenGL, and I bought a book on it for beginners. I finished writing the sample code for making a context/window. I get an error on this line at the part PFNWGLCREATECONTEXTATTRIBSARBPROC, saying "Error: expected a ')'": typedef HGLRC(APIENTRYP PFNWGLCREATECONTEXTATTRIBSARBPROC)(HDC, HGLRC, const int*); Replacing it or adding a ")" makes it error, but the error disappears when I use the OpenGL headers included in the books CD, which are OpenGL 3.0. I would like a way to make this work with the newest gl.h/wglext.h and without libraries. Here's the rest of the class if it's needed: #include <ctime> #include <windows.h> #include <iostream> #include <gl\GL.h> #include <gl\wglext.h> #include "Example.h" #include "GLWindow.h" typedef HGLRC(APIENTRYP PFNWGLCREATECONTEXTATTRIBSARBPROC)(HDC, HGLRC, const int*); PFNWGLCREATECONTEXTATTRIBSARBPROC wglCreateContextAttribsARB = NULL; bool GLWindow::create(int width, int height, int bpp, bool fullscreen) { DWORD dwExStyle; //Window Extended Style DWORD dwStyle; //Window Style m_isFullscreen = fullscreen;//Store the fullscreen flag m_windowRect.left = 0L; m_windowRect.right = (long)width; m_windowRect.top = 0L; m_windowRect.bottom = (long)height;//Set bottom to height // fill out the window class structure m_windowClass.cbSize = sizeof(WNDCLASSEX); m_windowClass.style = CS_HREDRAW | CS_VREDRAW; m_windowClass.lpfnWndProc = GLWindow::StaticWndProc; //We set our static method as the event handler m_windowClass.cbClsExtra = 0; m_windowClass.cbWndExtra = 0; m_windowClass.hInstance = m_hinstance; m_windowClass.hIcon = LoadIcon(NULL, IDI_APPLICATION); // default icon m_windowClass.hCursor = LoadCursor(NULL, IDC_ARROW); // default arrow m_windowClass.hbrBackground = NULL; // don't need background m_windowClass.lpszMenuName = NULL; // no menu m_windowClass.lpszClassName = (LPCWSTR)"GLClass"; m_windowClass.hIconSm = LoadIcon(NULL, IDI_WINLOGO); // windows logo small icon if (!RegisterClassEx(&m_windowClass)) { MessageBox(NULL, (LPCWSTR)"Failed to register window class", NULL, MB_OK); return false; } if (m_isFullscreen)//If we are fullscreen, we need to change the display { DEVMODE dmScreenSettings; //Device mode memset(&dmScreenSettings, 0, sizeof(dmScreenSettings)); dmScreenSettings.dmSize = sizeof(dmScreenSettings); dmScreenSettings.dmPelsWidth = width; //Screen width dmScreenSettings.dmPelsHeight = height; //Screen height dmScreenSettings.dmBitsPerPel = bpp; //Bits per pixel dmScreenSettings.dmFields = DM_BITSPERPEL | DM_PELSWIDTH | DM_PELSHEIGHT; if (ChangeDisplaySettings(&dmScreenSettings, CDS_FULLSCREEN) != DISP_CHANGE_SUCCESSFUL) { MessageBox(NULL, (LPCWSTR)"Display mode failed", NULL, MB_OK); m_isFullscreen = false; } } if (m_isFullscreen) //Is it fullscreen? { dwExStyle = WS_EX_APPWINDOW; //Window Extended Style dwStyle = WS_POPUP; //Windows Style ShowCursor(false); //Hide mouse pointer } else { dwExStyle = WS_EX_APPWINDOW | WS_EX_WINDOWEDGE; //Window Exteneded Style dwStyle = WS_OVERLAPPEDWINDOW; //Windows Style } AdjustWindowRectEx(&m_windowRect, dwStyle, false, dwExStyle); //Adjust window to true requested size //Class registered, so now create window m_hwnd = CreateWindowEx(NULL, //Extended Style (LPCWSTR)"GLClass", //Class name (LPCWSTR)"Chapter 2", //App name dwStyle | WS_CLIPCHILDREN | WS_CLIPSIBLINGS, 0, 0, //x, y coordinates m_windowRect.right - m_windowRect.left, m_windowRect.bottom - m_windowRect.top, //Width and height NULL, //Handle to parent NULL, //Handle to menu m_hinstance, //Application instance this); //Pass a pointer to the GLWindow here //Check if window creation failed, hwnd would equal NULL if (!m_hwnd) { return 0; } m_hdc = GetDC(m_hwnd); ShowWindow(m_hwnd, SW_SHOW); UpdateWindow(m_hwnd); m_lastTime = GetTickCount() / 1000.0f; return true; } LRESULT CALLBACK GLWindow::StaticWndProc(HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { GLWindow* window = nullptr; //If this is the create message if (uMsg == WM_CREATE) { //Get the pointer we stored during create window = (GLWindow*)((LPCREATESTRUCT)lParam)->lpCreateParams; //Associate the window pointer with the hwnd for the other events to access SetWindowLongPtr(hWnd, GWL_USERDATA, (LONG_PTR)window); } else { //If this is not a creation event, then we should have stored a pointer to the window window = (GLWindow*)GetWindowLongPtr(hWnd, GWL_USERDATA); if (!window) { //Do the default event handling return DefWindowProc(hWnd, uMsg, wParam, lParam); } } //Call our window's member WndProc(allows us to access member variables) return window->WndProc(hWnd, uMsg, wParam, lParam); } LRESULT GLWindow::WndProc(HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { switch (uMsg) { case WM_CREATE: { m_hdc = GetDC(hWnd); setupPixelFormat(); //Set the version that we want, in this case 3.0 int attribs[] = { WGL_CONTEXT_MAJOR_VERSION_ARB, 3, WGL_CONTEXT_MINOR_VERSION_ARB, 0, 0}; //Create temporary context so we can get a pointer to the function HGLRC tmpContext = wglCreateContext(m_hdc); //Make the context current wglMakeCurrent(m_hdc, tmpContext); //Get the function pointer wglCreateContextAttribsARB = (PFNWGLCREATECONTEXTATTRIBSARBPROC)wglGetProcAddress("wglCreateContextAttribsARB"); //If this is NULL then OpenGl 3.0 is not supported if (!wglCreateContextAttribsARB) { MessageBox(NULL, (LPCWSTR)"OpenGL 3.0 is not supported", (LPCWSTR)"An error occured", MB_ICONERROR | MB_OK); DestroyWindow(hWnd); return 0; } //Create an OpenGL 3.0 context using the new function m_hglrc = wglCreateContextAttribsARB(m_hdc, 0, attribs); //Delete the temporary context wglDeleteContext(tmpContext); //Make the GL3 context current wglMakeCurrent(m_hdc, m_hglrc); m_isRunning = true; } break; case WM_DESTROY: //Window destroy case WM_CLOSE: //Windows is closing wglMakeCurrent(m_hdc, NULL); wglDeleteContext(m_hglrc); m_isRunning = false; //Stop the main loop PostQuitMessage(0); break; case WM_SIZE: { int height = HIWORD(lParam); //Get height and width int width = LOWORD(lParam); getAttachedExample()->onResize(width, height); //Call the example's resize method } break; case WM_KEYDOWN: if (wParam == VK_ESCAPE) //If the escape key was pressed { DestroyWindow(m_hwnd); } break; default: break; } return DefWindowProc(hWnd, uMsg, wParam, lParam); } void GLWindow::processEvents() { MSG msg; //While there are messages in the queue, store them in msg while (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) { //Process the messages TranslateMessage(&msg); DispatchMessage(&msg); } } Here is the header: #pragma once #include <ctime> #include <windows.h> class Example;//Declare our example class class GLWindow { public: GLWindow(HINSTANCE hInstance); //default constructor bool create(int width, int height, int bpp, bool fullscreen); void destroy(); void processEvents(); void attachExample(Example* example); bool isRunning(); //Is the window running? void swapBuffers() { SwapBuffers(m_hdc); } static LRESULT CALLBACK StaticWndProc(HWND wnd, UINT msg, WPARAM wParam, LPARAM lParam); LRESULT CALLBACK WndProc(HWND wnd, UINT msg, WPARAM wParam, LPARAM lParam); float getElapsedSeconds(); private: Example* m_example; //A link to the example program bool m_isRunning; //Is the window still running? bool m_isFullscreen; HWND m_hwnd; //Window handle HGLRC m_hglrc; //Rendering context HDC m_hdc; //Device context RECT m_windowRect; //Window bounds HINSTANCE m_hinstance; //Application instance WNDCLASSEX m_windowClass; void setupPixelFormat(void); Example* getAttachedExample() { return m_example; } float m_lastTime; };

  Read the article

• Are you reporting Visual Studio 2012 issues to Microsoft correctly?

  - by Tarun Arora

  Issues you may run into while using Visual Studio need to be reported to the Microsoft Product Team via the Microsoft connect site. The Microsoft team then tries to reproduce the issue using the details provided by you. If the information you provide isn’t sufficient to reproduce the issue the team tries to contact you for specifics, this not only increases the cycle time to resolution but the lack of communication also results in issues not being resolved. So, when I report an issue one part of me tells me to include as much detail about the issue as I can clubbing screen shots, repo steps, system information, visual studio version information,… the other half tells me this is so time consuming, leave it for now and come back to fill all these details later. Reporting a bug but not including the supporting information is an invitation to excuses like …     Microsoft has absolutely changed this experience for VS 2012. The Microsoft Visual Studio Feedback tool is designed to simplify the process of providing feedback and reporting issues to Microsoft that you may encounter while using Microsoft Visual Studio 2012. Note – The Microsoft Visual Studio 2012 Feedback client currently only works for VS 2012 and not any other versions of Visual Studio. Setting up the Microsoft Visual Studio 2012 Feedback client Open Visual Studio, from the Tools menu select Extension and Updates. In the Extension and Updates window, click Online from the left pane and search using the text ‘feedback’, download and Install Microsoft Visual Studio 2012 Feedback Tool by following the instructions from the wizard. Note - Restarting Visual Studio after the install is a must! How to report a bug for Visual Studio 2012? Click on the Help menu and choose Report a Bug You should see an icon Microsoft Visual Studio 2012 Feedback Tool come up in the system tray icon area You’ll need to accept the Privacy statement. You have the option of reporting the feedback as private or public. Microsoft works with several Partners, MVP’s and Vendors who get access to early bits of Microsoft products for valuation. This is where it becomes essential to report the feedback privately. I would choose the Public option otherwise. After all if it’s out there in the public, others can discover and add to it easily. You now have the option to report a new issue or add to an existing issue. Should you choose to add to an existing issue you should have the feedback ID of the issue available. This can be obtained from the Microsoft Connect site. For now I am going to focus on reporting a new feedback privately. Filling out the feedback details You will notice that VsInfo.xml and DxDiagOutput.txt are automatically attached as you enter this screen (more on that later).  Feedback Type Choose the feedback type from (Performance, Hang, Crash, Other) Note – The record button will only be enabled once you have enabled once you have chosen the feedback type, Bug-repro recording is not available for Windows Server 2008.     Effective Title and Description Enter a title that helps us differentiate the bug when it appears in a list, so that we can group it with any related bugs, assign it to a developer more effectively, and resolve it more quickly. Example: Imagine that you are submitting a bug because you tried to install Service Pack 1 and got a message that Visual Studio is not installed even though it is. Helpful:  Installed Visual Studio version not detected during Service Pack 1 setup. Not helpful:  Service Pack 1 problem. Tip: Write the problem description first, and then distil it to create a title. Example Description: Helpful: When I run Service Pack 1 Setup, I get the message "No Visual Studio version is detected" even though I have Visual Studio 2010 Ultimate and Visual C++ 2010 Express installed on my machine. Even though I uninstalled both editions, and then first reinstalled Ultimate and then Express, I still get the message. Record: Becoming a first class citizen Often a repro report is invaluable to describe and decipher the issue. Please use this feature to send actionable feedback. The record repro feature works differently depending on the feedback type you selected. Please find below details for each recording option. You can start recording simply by selecting a feedback type, and clicking on the “Record” button. When "Performance" is the bug type: When the Microsoft Visual Studio trace recorder starts, perform the actions that show the performance problem you want to report and then click on the "Stop Recording" button as soon as you experience the performance problem. Because the tool optimizes trace collection, you can run it for as long as it takes to show the problem, up to two hours. Note that, you need to stop recording as soon as the performance issue occurs, because the tool captures only the last couple minutes of your actions to optimize the trace collection. After you stop the recording, the tool takes up to two minutes to assemble the data and attach an ETLTrace.zip file to your bug report. The data includes information about Windows events and the Visual Studio code path. Note that, running the Microsoft Visual Studio trace recorder requires elevated user privilege. When "Crash" is the bug type: When the dialog box appears, select the running Visual Studio instance for which you want to show the steps that cause a crash. When the crash occurs, click on the "Stop Record" button. After you do this, two files are attached to your bug report - an AutomaticCrashDump.zip file that contains information about the crash and a ReproSteps.zip file that shows the repro steps. Repro steps are captured by Windows Problem Steps Recorder. Note that, you can pause the recording, and resume later, or for a specific step, you can add additional comments. When "Hang" is the bug type: The process for recording the steps that cause a hang resembles the one for crashes. The difference is, you can even collect a dump file after the VS hangs; start the VSFT either from the system tray or by starting a new instance of VS, select "Hang" as feedback type and click on the "Record" button. You will be prompted which VS to collect dump about, select the VS instance that hanged. VSFT collects a dump file regarding the hang, called MiniDump.zip, and attaches to your bug report. When "Other" is the bug type: When the problem step recorder starts, perform the actions that show the issue you want to report and then choose the "Stop” button. You can pause the recording, and resume later, or for a specific step, you can add additional comments. Once you’re done, ReproSteps.zip is added to your bug report. Pre-attached files It is essential for Microsoft to know what version of the the product are you currently using and what is the current configuration of your system. Note – The total size of all attachments in a bug report cannot exceed 2 GB, and every uncompressed attachment must be smaller than 512 MB. We recommend that you assemble all of your attachments, compress them together into a .zip file, and then attach the .zip file. Taking a screenshot Associate a screen shot by clicking the Take screenshot button, choose either the entire desktop, the specific monitor (useful if you are working in a multi monitor configuration) or the specific window in question. And finally … click Submit If you need further help, more details can be found here. You can view your feedback online by using the following URL “">https://connect.microsoft.com/VisualStudio/SearchResults.aspx?SearchQuery=<feedbackId>” Happy bug logging

  Read the article

• High Profile ASP.NET websites

  - by nandos

  About twice a month I get asked to justify the reason "Why are we using ASP.NET and not PHP or Java, or buzz-word-of-the-month-here, etc". 100% of the time the questions come from people that do not understand anything about technology. People that would not know the difference between FTP and HTTP. The best approach I found (so far) to justify it to people without getting into technical details is to just say "XXX website uses it". Which I get back "Oh...I did not know that, so ASP.NET must be good". I know, I know, it hurts. But it works. So, without getting into the merit of why I'm using ASP.NET (which could trigger an endless argument for other platforms), I'm trying to compile a list of high profile websites that are implemented in ASP.NET. (No, they would have no idea what StackOverflow is). Can you name a high-profile website implemented in ASP.NET? EDIT: Current list (thanks for all the responses): (trying to avoid tech sites and prioritizing retail sites) Costco - http://www.costco.com/ Crate & Barrel - http://www.crateandbarrel.com/ Home Shopping Network - http://www.hsn.com/ Buy.com - http://www.buy.com/ Dell - http://www.dell.com Nasdaq - http://www.nasdaq.com/ Virgin - http://www.virgin.com/ 7-Eleven - http://www.7-eleven.com/ Carnival Cruise Lines - http://www.carnival.com/ L'Oreal - http://www.loreal.com/ The White House - http://www.whitehouse.gov/ Remax - http://www.remax.com/ Monster Jobs - http://www.monster.com/ USA Today - http://www.usatoday.com/ ComputerJobs.com - http://computerjobs.com/ Match.com - http://www.match.com National Health Services (UK) - http://www.nhs.uk/ CarrerBuilder.com - http://www.careerbuilder.com/

  Read the article

• Entity Framework with MySQL - Timeout Expired while Generating Model

  - by Nathan Taylor

  I've constructed a database in MySQL and I am attempting to map it out with Entity Framework, but I start running into "GenerateSSDLException"s whenever I try to add more than about 20 tables to the EF context. An exception of type 'Microsoft.Data.Entity.Design.VisualStudio.ModelWizard.Engine.ModelBuilderEngine+GenerateSSDLException' occurred while attempting to update from the database. The exception message is: 'An error occurred while executing the command definition. See the inner exception for details.' Fatal error encountered during command execution. Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. There's nothing special about the affected tables, and it's never the same table(s), it's just that after a certain (unspecific) number of tables have been added, the context can no longer be updated without the "Timeout expired" error. Sometimes it's only one table left over, and sometimes it's three; results are pretty unpredictable. Furthermore, the variance in the number of tables which can be added before the error indicates to me that perhaps the problem lies in the size of the query being generated to update the context which includes both the existing table definitions, and also the new tables that are being added to it. Essentially, the SQL query is getting too large and it's failing to execute for some reason. If I generate the model with EdmGen2 it works without any errors, but the generated EDMX file cannot be updated within Visual Studio without producing the aforementioned exception. In all likelihood the source of this problem lies in the tool within Visual Studio given that EdmGen2 works fine, but I'm hoping that perhaps others could offer some advice on how to approach this very unique issue, because it seems like I'm not the only person experiencing it. One suggestion a colleague offered was maintaining two separate EBMX files with some table crossover, but that seems like a pretty ugly fix in my opinion. I suppose this is what I get for trying to use "new technology". :(

  Read the article

• Applying Test Driven Development to a tightly coupled architecture

  - by Chris D

  Hi all, I've recently been studying TDD, attended a conference and have dabbled in few tests and already I'm 100% sold, I absolutely love it TDD. As a result I've raised this with my seniors and they are prepared to give it a chance, so they have tasked me with coming up with a way to implement TDD in the development of our enterprise product. The problem is our system has evolved since the days of VB6 to .NET and implements alot of legacy technology and some far from best practice development techniques i.e. alot of business logic in the ASP.NET code behind and client script. The largest problem however is how our classes are tightly coupled with database access; properties, methods, constructors - usually has some database access in some form or another. We use an in-house data access code generator tool that creates sqlDataAdapters that gives us all the database access we could ever want, which helps us develop extremely quickly, however, classes in our business layer are very tightly coupled to this data layer - we aren't even close to implementing some form of repository design. This and the issues above have created me all sorts of problems. I have tried to develop some unit tests for some existing classes I've already written but the tests take ALOT longer to run since db access is required, not to mention since we use the MS Enterprise Caching framework I am forced to fake a httpcontext for my tests to run successfully which isn't practical. Also, I can't see how to use TDD to drive the design of any new classes I write since they have to be soo tightly coupled to the database ... help! Because of the architecture of the system it appears I can't implement TDD without some real hack which in my eyes just defeats the aim of TDD and the huge benefits that come with. Does anyone have any suggestions how I could implement TDD with the constraints I'm bound too? or do I need to push the repository design pattern down my seniors throats and tell them we either change our architecture/development methodology or forget about TDD altogether? :) Thanks

  Read the article

• What is the difference between System.Speech.Recognition and Microsoft.Speech.Recognition?

  - by Michael

  There are two similar namespaces and assemblies for speech recognition in .NET. I’m trying to understand the differences and when it is appropriate to use one or the other. There is System.Speech.Recognition from the assembly System.Speech (in System.Speech.dll). System.Speech.dll is a core DLL in the .NET Framework class library 3.0 and later There is also Microsoft.Speech.Recognition from the assembly Microsoft.Speech (in microsoft.speech.dll). Microsoft.Speech.dll is part of the UCMA 2.0 SDK I find the docs confusing and I have the following questions: System.Speech.Recognition says it is for "The Windows Desktop Speech Technology", does this mean it cannot be used on a server OS or cannot be used for high scale applications? The UCMA 2.0 Speech SDK ( http://msdn.microsoft.com/en-us/library/dd266409%28v=office.13%29.aspx ) says that it requires Microsoft Office Communications Server 2007 R2 as a prerequisite. However, I’ve been told at conferences and meetings that if I do not require OCS features like presence and workflow I can use the UCMA 2.0 Speech API without OCS. Is this true? If I’m building a simple recognition app for a server application (say I wanted to automatically transcribe voice mails) and I don’t need features of OCS, what are the differences between the two APIs?

  Read the article

• WCF push to client through firewall?

  - by Sire

  See also How does a WCF server inform a WCF client about changes? (Better solution then simple polling, e.g. Coment or long polling) I need to use push-technology with WCF through client firewalls. This must be a common problem, and I know for a fact it works in theory (see links below), but I have failed to get it working, and I haven't been able to find a code sample that demonstrates it. Requirements: WCF Clients connects to server through tcp port 80 (netTcpBinding). Server pushes back information at irregular intervals (1 min to several hours). Users should not have to configure their firewalls, server pushes must pass through firewalls that have all inbound ports closed. TCP duplex on the same connection is needed for this, a dual binding does not work since a port has to be opened on the client firewall. Clients sends heartbeats to server at regular intervals (perhaps every 15 mins) so server knows client is still alive. Server is IIS7 with WAS. The solution seems to be duplex netTcpBinding. Based on this information: WCF through firewalls and NATs Keeping connections open in IIS But I have yet to find a code sample that works.. I've tried combining the "Duplex" and "TcpActivation" samples from Microsoft's WCF Samples without any luck. Please can someone point me to example code that works, or build a small sample app. Thanks a lot!

  Read the article

• How to find if an Oracle APEX session is expired

  - by Mathieu Longtin

  I have created a single-sign-on system for our Oracle APEX applications, roughly based on this tutorial: http://www.oracle.com/technology/oramag/oracle/09-may/o39security.html The only difference is that my master SSO login is in Perl, rather than another APEX app. It sets an SSO cookie, and the app can check if it's valid with a database procedure. I have noticed that when I arrive in the morning, the whole system doesn't work. I reload a page from the APEX app, it then sends me to the SSO page because the session was expired, I logon, and get redirected back to my original APEX app page. This usually works except first thing in the morning. It seems the APEX session is expired. In that case it seems to find the session, but then refuse to use it, and sends me back to the login page. I've tried my best to trace the problem. The "wwv_flow_custom_auth_std.is_session_valid" function returns true, so I'm assuming the session is valid. But nothing works until I remove the APEX session cookie. Then I can log back in easily. Anybody knows if there is another call that would tell me if the session is expired or not? Thanks

  Read the article

• Ideas for OpenSource CMS in ASP.NET MVC

  - by rajesh pillai

  I am in the process of collecting ideas for building an opensource CMS based on ASP.net framework. I have choosen ASP.NET MVC with Jquery as the tool to develop this. I have made this as community wiki. Background: Most of the good CMS that is available is built on PHP, though off late CMS built on ASP.net framework seems to be cropping up. I would like to collect ideas/suggestion/expectations from an opensource CMS system for ASP.net platform. I am looking for expectation from technology and features that you wish could find in a modern CMS and any other thoughts/ideas that comes to your mind. Your input would be of great help in this direction. Meanwhile I am also reviewing many opensource CMS system built on ASP.net as well as MS Office Sharepoint to get ideas and I would update my findings here for your reference. The following are some of the opensource CMS/BlogEngines that I am in the process of reviewing. -Oxite (ASP.net MVC) : This is the new kid on the block -Wordpress -BlogEngine.net -Umbraco Some of the features that I can think of is noted below Simplified content creation Support Multiple content author Metadata feature Workflow engine Simplified deployment List based contents (sharepoint like) Customizable URL's Support content Caching Roles (contenauthor, contentpublisher etc) Support different types of content (like html, txt, document, image, videos) Skinnable (support extensible themes) Localization & Globalization Unlimited nesting of categories Readymade template for blog, forums,survey. Good documentation You can add your points or add some depth to any of the above feature.

  Read the article

• Generate JSON object with transactionReceipt

  - by Carlos

  Hi, I've been the past days trying to test my first in-app purchse iphone application. Unfortunately I can't find the way to talk to iTunes server to verify the transactionReceipt. Because it's my first try with this technology I chose to verify the receipt directly from the iPhone instead using server support. But after trying to send the POST request with a JSON onbject created using the JSON api from google code, itunes always returns a strange response (instead the "status = 0" string I wait for). Here's the code that I use to verify the receipt: - (void)recordTransaction:(SKPaymentTransaction *)transaction { NSString *receiptStr = [[NSString alloc] initWithData:transaction.transactionReceipt encoding:NSUTF8StringEncoding]; NSDictionary *jsonDictionary = [NSDictionary dictionaryWithObjectsAndKeys:@"algo mas",@"receipt-data",nil]; NSString *jsonString = [jsonDictionary JSONRepresentation]; NSLog(@"string to send: %@",jsonString); NSLog(@"JSON Created"); urlData = [[NSMutableData data] retain]; //NSURL *sandboxStoreURL = [[NSURL alloc] initWithString:@"https://sandbox.itunes.apple.com/verifyReceipt"]; NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:[NSURL URLWithString:@"https://sandbox.itunes.apple.com/verifyReceipt"]]; [request setHTTPMethod:@"POST"]; [request setHTTPBody:[jsonString dataUsingEncoding:NSUTF8StringEncoding]]; NSLog(@"will create connection"); [[NSURLConnection alloc] initWithRequest:request delegate:self]; } maybe I'm forgetting something in the request's headers but I think that the problem is in the method I use to create the JSON object. HEre's how the JSON object looks like before I add it to the HTTPBody : string to send: {"receipt-data":"{\n\t\"signature\" = \"AUYMbhY ........... D0gIjEuMCI7Cn0=\";\n\t\"pod\" = \"100\";\n\t\"signing-status\" = \"0\";\n}"} The responses I've got: complete response { exception = "java.lang.IllegalArgumentException: Property list parsing failed while attempting to read unquoted string. No allowable characters were found. At line number: 1, column: 0."; status = 21002; } Thanks a lot for your guidance.

  Read the article

• jsf datatable lazy load filter and sorting

  - by darko petreski

  Hi, I have worked on several projects with a lot of data tables. The tables had sorting, filtering and paging of course on server side and with help of the db (all databases has implemented sording, filtering -where and limit the returned results). When workig on real application there are a thousands of even a millions rows. But I have seen several JSF dagatable components. They implement pagination, sorting and filtering on client side!! According to me this is very silly. This technology is called enterprise and they sort the data on the client side with java script! I have not seen any good JSF data grid that has build in features for sorting, filtering and lazy loading on the server side. Why is that? Am I looking in wrong direction or really there in no build support for this. Lately I am testing primefaces and lazy loading datatable. It really works fine, but the table i can only lazy load. If you add sort and filter then the problems begin. Conclusion: Is there any datatable JSF component than can perform lazy load pagination, and filtering and sorting on server side. If I need to implement my own solution thanks to the teams that made client side sorting and filtering, they are useless. Regards

  Read the article

• How to keep track of TextPointer in WPF RichTextBox?

  - by Alan Spark

  I'm trying to get my head around the TextPointer class in a WPF RichTextBox. I would like to be able to keep track of them so that I can associate information with areas in the text. I am currently working with a very simple example to try and figure out what is going on. In the PreviewKeyDown event I am storing the caret position and then in the PreviewKeyUp event I am creating a TextRange based on the before and after caret positions. Here is a code sample that illustrates what I am trying to do: // The caret position before typing private TextPointer caretBefore = null; private void rtbTest_PreviewKeyDown(object sender, KeyEventArgs e) { // Store caret position caretBefore = rtbTest.CaretPosition; } private void rtbTest_PreviewKeyUp(object sender, KeyEventArgs e) { // Get text between before and after caret positions TextRange tr = new TextRange(caretBefore, rtbTest.CaretPosition); MessageBox.Show(tr.Text); } The problem is that the text that I get is blank. For example, if I type the character 'a' then I would expect to find the text "a" in the TextRange. Does anyone know what is going wrong? It could be something very simple but I've spent an afternoon getting nowhere. I am trying to embrace the new WPF technology but find that the RichTextBox in particular is so complicated that it makes even doing simple things like this difficult. If anyone has any links that do a good job of explaining the TextPointer, I would appreciate it if you can let me know.

  Read the article

• Thrift,.NET,Cassandra - Is this is right combination?

  - by Vadi

  I've been evaluating technology stack for developing a social network based application. Below are the stack I think could well suitable for this application type of application: GUI -- ASP.NET MVC, Flash (Flex) Business Services -- Thrift based services One of the advantage of using Thrift is to solve scaling problems that will come in future when the user base increases rapidly. All the business logic can be exposed as a services using REST,JSON etc., This also allows us to go with C++ or Erlang based services when situation demands. Database -- mySQL, CasSandara mySQL can be used for storing the data which needs to be persisted. Cassandara will be used for storing global identifiers to the persisted data. Since Cassandara is also very good at scaling by introducing more nodes this will leverage Thrift based services as well. And also there is native support between Cassandara and Thrift Cache Server -- Memcached Any requests from Business Services will only talk to Memcached if any non-dirty data is required, otherwise there will be some background jobs that will invalidate the cache from database. The question is: Is the Thrift which is open-sourced one is production-ready? Is it the right stack for services layer to choose when the application (GUI) is primarily gets developed in ASP.NET and DB is mysql? Is there any other caveats that anyone here experienced? One of the main objective behind this stack is to easily scale up with more nodes and also this helps us to use Linux boxes, it will reduce our cost significantly Thoughts please ..

  Read the article

• how to do asynchronous http requests with epoll and python 3.1

  - by flow

  there is an interesting page http://scotdoyle.com/python-epoll-howto.html about how to do asnchronous / non-blocking / AIO http serving in python 3. there is the tornado web server which does include a non-blocking http client. i have managed to port parts of the server to python 3.1, but the implementation of the client requires pyCurl and seems to have problems (with one participant stating how ‘Libcurl is such a pain in the neck’, and looking at the incredibly ugly pyCurl page i doubt pyCurl will arrive in py3+ any time soon). now that epoll is available in the standard library, it should be possible to do asynchronous http requests out of the box with python. i really do not want to use asyncore or whatnot; epoll has a reputation for being the ideal tool for the task, and it is part of the python distribution, so using anything but epoll for non-blocking http is highly counterintuitive (prove me wrong if you feel like it). oh, and i feel threading is horrible. no threading. i use stackless. people further interested in the topic of asynchronous http should not miss out on this talk by peter portante at PyCon2010; also of interest is the keynote, where speaker antonio rodriguez at one point emphasizes the importance of having up-to-date web technology libraries right in the standard library.

  Read the article

• Flex vs. jQuery vs. GWTvs./ Closre vs. Cappuccino vs. plain JS and HTML5?

  - by Laith J

  Hello, I'm creating my first web application and I'm really confused as to what technology to go for. My application needs to look serious (like an application), it doesn't need many colorful graphical interfaces. It only needs a toolbar, a tab bar, a split panel (preferably 3 columns), an easily-formatable text field, and a status bar. It will connect to a MySQL database through PHP (unless I go for GWT). Users will upload files. My evaluation of the options: Flex: Probably the easiest to develop but I'm pretty sure my application is something one would use on an iPad and with Flash's future on the iPad still unsure, I don't want to take the risk, otherwise Flex would've been my choice. jQuery: I've heard a lot about it and a lot of people recommend but I don't know how easy it is to use and how customizable the look of my app is. GWT: The problem with GWT is that it doesn't have many widgets. Another problem is that I'm gonna have to host the files in AppEngine's datastore and transfer them back and forth to a web server that will do operations on them (I need to process them) which adds more traffic and slows the process which worsens the user experience. Closure: It has a nice toolbar and a nice text field. I'm not sure how easy it is to use. Plus, I read an article that makes it sound really bad. Cappuccino: It has a very nice UI and it has a mac feel. I'm planning to give my application a mac feel anyway so this will save me a lot of theming. But if I go for this option I won't be able to make use of HTML5's new features (especially working offline). Plain JS and HTML5: This gives me the most flexibility but it is the hardest to work for. I'm sorry if this is subjective but I really need help with this.

  Read the article

• How to Put Javascript into an ASP.NET MVC View

  - by Maxim Z.

  I'm really new to ASP.NET MVC, and I'm trying to integrate some Javascript into a website I'm making as a test of this technology. My question is this: how can I insert Javascript code into a View? Let's say that I start out with the default ASP.NET MVC template. In terms of Views, this creates a Master page, a "Home" View, and an "About" view. The "Home" View, called Index.aspx, looks like this: <%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage" %> <asp:Content ID="indexTitle" ContentPlaceHolderID="TitleContent" runat="server"> Home Page </asp:Content> <asp:Content ID="indexContent" ContentPlaceHolderID="MainContent" runat="server"> <h2><%= Html.Encode(ViewData["Message"]) %></h2> <p> To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC Website">http://asp.net/mvc</a>. </p> <p>Welcome to this testing site!</p> </asp:Content> Adding a <script> tag here didn't work. Where and how should I do it? P.S.: I have a feeling I'm missing something very basic... Thanks in advance!

  Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >