Search Results

Search found 11303 results on 453 pages for 'info'.

Page 337/453 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

  • How to set up multiple video cards in Windows XP

    - by Swish
    All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

    Read the article

  • Apache in MAC OS X

    - by Michal K.
    I have problems with apache on MAC OS Lion 10.7.5. I have VirtualHosts: <VirtualHost *:80> ServerName devel.dev DocumentRoot /var/www </VirtualHost> <VirtualHost *:80> ServerName test.dev DocumentRoot /var/www <Directory "/var/www"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have configured httpd.conf to ServerRoot = /usr/htdocs (empty directory). test.dev and devel.dev says always "It works!". Why ? In /var/www I have index.php which contains only one letter "k" (for tests). Edit, more info: I have restart apache milion times. File with VirtualHosts is included. error.log: [Tue Oct 02 20:03:55 2012] [notice] caught SIGTERM, shutting down [Tue Oct 02 20:03:55 2012] [warn] mod_bonjour: Cannot stat template index file '/System/Library/User Template/English.lproj/Sites/index.html'. [Tue Oct 02 20:03:55 2012] [notice] Digest: generating secret for digest authentication ... [Tue Oct 02 20:03:55 2012] [notice] Digest: done [Tue Oct 02 20:03:55 2012] [notice] Apache/2.2.22 (Unix) DAV/2 PHP/5.3.15 with Suhosin-Patch configured -- resuming normal operations When I stop apache, localhost still displays It works!

    Read the article

  • Windows 7, Black screen with cursor, impossible to logon

    - by PJC
    First - I have gone through as many possible solutions I've found here and elsewhere. [Edit - to describe the issue in more detail, the PC appears to boot correctly, but instead of the logon screen, I have been getting a black screen WITH the pointer cursor, and it responds correctly to the mouse. Pressing CTL-ALT-DEL brings up the logon screen's background, but with no logon area nor any other content. This screen was at the full resolution before I uninstalled the graphics driver in safe-mode.] I also just ran a full up-to-date AVG scan from boot media. [Edit - the AVG scan, which was updated to today's virus signatures, found no issues at all.] So - steps I've tried: Safe Boot, Restore from before the issue - done, no help. Uninstall the graphics driver - done, now i have a 1024x768 fallback screen, still no way in. sfc /scannow - only doable from Safe boot obviously, but no change. [Edit - booting from restore media, performing a startup repair and...]Restore further back - restored to 2 days ago, and I'd had many reboots since then with no problem. Enable autologin to try to get beyond the login screen - done, doesn't work. It seems the best advice is complete reinstall, but I really don't want to do that because it'll take 3-4 days to add all the apps I use. Some key points to note - in both states - before and after removing the video driver, I always had a mouse cursor on the screen. CTL-ALT-DEL flashes up the login background, but no login info. I can (and often do) reinstall from scratch, but was at a fairly stable state before this, and would prefer not to. -Paul

    Read the article

  • Applications are being opened by IE instead of running normally

    - by Star
    I rewrote the Question to add everything that i tried so far. Many of my applications are being opened by Internet Explorer. (not all) For example when I run Firefox.exe (from shortcut) I get IE run instead, with the following URL http: // %22d/ Browser/firefox.exe%22 (I added spaces to prevent link creation) the shortcut target is: "D:\Browser\firefox.exe" when I attempted to open firefox.exe from it's folder the results were the same as the previous one I attempted to open it by cmd, so i navigated with cmd to the FF path then wrote: firefox.exe the was the same except that the URL was: http: // Firefox.exe/ when i jsut write firefox the result URL was: http: // Firefox/ (is it some kind of parameter or something??) trying the same with chrome resulted the same results as the previous tests. I tried creating a new user (adminstartor) but the problem still there. I tried every registry key with exe on it (not sure if i tried them all) no change I tried removing IE but came back by itself somehow, meanwhile IE is removed, FF and its fellow apps gave me open with window I tried reinstalling the applications but it just no use. Time Line: (as requested from @Daredev) I don't know when it happened because the computer is for the company i work for and it was like that since i got it. (The IT there gave up on the problem lon time ago!). applications were installed already are "firefox" and "XPS viewer" . applications were working after the problem everything except what uses browsing (MS help viewer, XPS viewer, firefox-even I've re installed it-, opera, chrome) that what I thought but after installing Maxthon , comodoDragon this theory was blown away. system info: 1- windows xp professional service pack 3 2- system fully patched: Yes 3- anti-virus up to date: Yes 4- same behavior when booting into safe mode: Yes

    Read the article

  • Information on the BMPP File Extension/Format

    - by Angel Brighteyes
    I am looking for information on the file type BMPp. Namely I need an application that can create this file type, preferably open source or free. Wikipedia says for BMP File Format that 'BMPp' is a "type code", which is the "mechanism used by pre-OSX Macs ... to denote a files format..." (Look in the little info-box of general information under "Type code"). Continuing my research, I found an old 2009 archived mailing list "Re: Incorrect png file type 'PNG' that talks about something related to another problem a developer is having. In the response he talks about there being variant file types, and lists BMPp as being linked to an old version of Graphics Converter. The company Lemkesoft sells Graphics Converter, which I am not willing to purchase. I can't imagine that the only program in existence to make a BMPp file is that program. There has got to be another way to make that file type, other than creating a BMP file and just renaming it to BMPp (unless of course it is really that easy)? This is the first time I've run into this file format, and it took a bit on Google, Bing, and Wikipedia to find the information that I've posted here. Any further help would be appreciated.

    Read the article

  • Why can't I connect to my home SSH (SFTP) server? What am I doing wrong?

    - by Rolo
    I am new to this topic of creating a SFTP server on one's computer. I would like to be able to access the folder on my Windows XP computer via SFTP from another computer or a phone. The following is what I have done so far: I have installed SSH Windows and everything is setup correctly because I can access it (the folder on my pc) via WinSCP. I however cannot access it from my phone. It doesn't connect. The phone can be on the same wireless network as the Windows XP computer, but I would prefer to be able to access this when not in the same network. Now, from what I have read and understood, the following is the information needed to connect: 1) Host Name: This would be my computer's ip address which I access by typing ipconfig in a cmd prompt (I access this easily on my computer because I simply put in localhost or 127.0.0.1) 2) Port Number: That would be port 22 (I have also added this to my router in the port forwarding section). 3) Username: This would be my Windows XP username. This however is my full name, including my middle initial followed by a period. I am wondering if this is maybe causing problems in accessing it from my phone, since the name has spaces and punctuation (the period). 4) Password: The password of my Windows XP computer Extra Info: When I say phone, I mean an Android phone and I am using an ftp / sftp app to access my pc via the phone's cellular network (I also tried the wireless, but that didn't work as well). I have tried more than one program. On one program it tells me Connection timed out and on another it tells me "timeout:socket is not established" Also, I know that I can use the site noip, but I prefer to connect this way first. Also, because I am new to this, I would like to look into what exactly noip is doing and if they would be seeing my files as they are transferred from phone to pc. Thanking you in advance for your help.

    Read the article

  • Google Chrome on Linux not using ALSA for sound

    - by DarkMoon
    On my laptop, I've got an .asoundrc file that outputs sound to my USB headset. This works fine for SMplayer and Firefox. However, Google Chrome (at least, Flash-based and HTML5-based videos and HTML5-based audio in Chrome) plays through the laptop speakers instead. I've tried running Chrome from a command-line, hoping there would be some helpful output, but no such luck. I've tried looking through Google for whether Chrome even uses ALSA, or if it uses something else, but I have been unsuccessful in this. This question seems to be the same issue, but no suggestion was made. Anyone have any ideas? I'm running Gentoo with a 3.10.17 kernel, 1.0.27 ALSA utils, 2.6.5 FVWM, and 36.0.1985.143 Chrome. If you need more info, please let me know. EDIT: I've configured the USB headset as the default ALSA device. Volume levels for both headset and onboard are set and un-muted using alsamixer. My .asoundrc file is as follows. ctl.!default { type hw card Headset } pcm.dmixer { type dmix ipc_key 1024 slave { pcm { type hw card Headset } period_size 1024 buffer_size 4096 } bindings { 0 0 1 1 } } pcm.!default { type plug slave.pcm dmixer }

    Read the article

  • Hungry hungry BIOS: why do I have less than 4 GiB of memory?

    - by Rhymoid
    I thought I had 4 GiB of memory, but just to be sure, let's ask the BIOS about that: ?: sudo dmidecode --type 20 # dmidecode 2.12 SMBIOS 2.6 present. Handle 0x000B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Alright, 4 GiB it is. But I can't use all of it: ?: cat /proc/meminfo | head -n 1 MemTotal: 3913452 kB Somehow, somewhere, I lost 274 MiB. Where did 6% of my memory go? Now I know the address ranges in DMI are incorrect, because the ACPI memory map reports usable ranges well beyond the ending address of the second memory module: ?: dmesg | grep -E "BIOS-e820: .* usable" [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dee7bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable I get pretty much the same info from /proc/iomem (except for the 4 kiB hole 0x000-0xFFF), which also shows that the kernel only accounts for less than 8 MiB. I guess 0x00000000-0x7FFFFFFF is indeed mapped to the first memory module, and 0x80000000-0xDFFFFFFF to part of the second memory module (a bunch of ACPI NVS things live between 0xDEE7C000 and 0xDEF30FFF, and the remaining 16-something MiB of that range are just 'reserved'). I guess the highest 0x18000000 bytes of the second memory module are mapped above the 4 GiB mark. But even then, there are two problems: 128 MiB (0x08000000 bytes, living somewhere between 0xE0000000 and 0xFFFFFFFF) are still completely unaccounted for. To note, my graphics card is on PCI-Express and (allegedly) has 1 GiB dedicated memory, so that shouldn't be the culprit. Did the BIOS screw up in moving the memory, leaving it partially shadowed by MMIO? Even with this mediocre explanation, I only 'found' 128 MiB. But /proc/meminfo is reporting a much larger deficit; where's the other 146 MiB? How does Linux count MemTotal?

    Read the article

  • What could cause a dual-monitor PC to suddenly stop using one of the screens?

    - by raldi
    I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

    Read the article

  • Eee PC 1015BX ram compatibility?

    - by AdrianaMX
    Asus Eee PC 1015BX Operating System Windows 7 Starter, 32bit CPU AMD Fusion APU C60 1.0GHz (dual core) Processor Graphic AMD Radeon HD 6290 (256 MB Shared) Memory DDR3, 1 x SO-DIMM, 1GB I have upgraded the preloaded "Windows 7 Starter" to "Windows 7 Professional" I want to upgrade the ram, from 1gb (factory) to 4 gb. What should i buy? SODDR3, 4GB, 1066MHZ, PC3-8500, 204PIN? or SODDR3, 4GB, 1333MHZ, PC3-10666, 204PIN? I already know that Windows 7 32-bits can't handle 4gb, only 3gb (but 3gb is better than one stick of 2gb). ASUS send me this link, but i think they are wrong, (or Insufficient Information for me) http://www.kingston.com/us/memory/search/Default.aspx?DeviceType=3&Mfr=ASU&Line=Eee%20PC&Model=71404 Thank you. CPU-Z Chipset Memory Type DDR3 Memory Size 750 MBytes Memory Frequency 532.2 MHz (3:16) CAS# latency (CL) 7.0 RAS# to CAS# delay (tRCD) 7 RAS# Precharge (tRP) 7 Cycle Time (tRAS) 20 Bank Cycle Time (tRC) 27 Memory SPD NO INFO AIDA64 North bridge Properties North bridge AMD K14 IMC Supported Memory Types DDR3-800, DDR3-1066 SDRAM Memory Slots DRAM Slot #1 1 GB (DDR3 SDRAM) Integrated Graphics Controller Graphics Controller Type AMD Radeon HD 6290 (Wrestler) Graphics Controller Status Enabled Graphics Frame Buffer Size 256 MB

    Read the article

  • Are my web server permissions for uploading correct?

    - by user1699176
    I'm on debian and I have my website in the directory /srv/www/mysite.com/public_html I set chown for www-data:www-data on /srv/www. I have root disabled and created a sudo user which is id 1000:1000. I would also like to use this user to upload to /srv/www so I added my sudo user to the www-data group. I originally got a message saying that I didn't have permissions to upload a file to that directory. After playing around with multiple permissions for a while I finally was able to upload properly, but I'm not sure if this set up is correct. I'm hesitant to change it for now since it actually works, so I thought I'd ask for advice. I think what I ended up doing was this: sudo chown -R www-data:www-data /srv/www sudo chmod g+s /srv/www sudo usermod -aG www-data myuser sudo chgrp -R www-data /srv/www sudo chmod -R g+w /srv/www When I was finally able to successfully upload a file (with FileZilla) it showed the owner as myuser myuser. Shouldn't it have been www-data myuser? My question is whether this is correct and if there are any potential security issues? For example, I wasn't sure if I was actually supposed to use "myuser" to own the /srv/www directory instead sudo chown -R myuser:myuser /srv/www or maybe sudo chown -R www-data:myuser /srv/www If you need more info, let me know, thanks.

    Read the article

  • Windows XP VM on VMWare ESXi 4.1 "pausing" / blocked occasionally

    - by FelixD
    We have an issue with Windows XP SP3 VMs on VMWare ESXi 4.1.0 (the free version): They sometimes seem to "pause" for several minutes. This happens rarely (maybe once a month per VM, at least noticed only that often), but still is an issue for us. It happens for three different but similar VMs on three pretty different hosts (different hardware). I have the feeling that the "pausing" is not actually the CPU blocking, but probably the harddisks, but not 100% sure. The servers have one IDE disk (C:) and one SCSI (D:) and it might be either of the two. I have seen scheduled tasks simply not starting for up to 9 minutes and then running normally again with normal speed. They were totally blocked. This is not a load issue, the VMWare hosts have average load and the VMs in question already have reserved CPU resources plus high priorities for CPU and disk. The Windows boxes run mainly MySQL, Tomcat, FileZilla server, Cygwin stuff, Java + R applications, VMWare client, Elusiva Terminal Server pro, Nagios client. Not sure if this might be related with any of that software (e.g. Elusiva). Trying to debug this, there was nothing visible in Windows Event log, other logs in C:\Windows, VMWare events etc. Unfortunately the vmware.log file ends with "Log throttled". We found that we ran into 2 VMWare bugs there: The VMWare client writes lots on bogus messages in the vmware.log, which we now disabled (log level error setting) plus the bug that VMWare does not unthrottle the log (at least so far despite VM reboots). I know there is not much guidance and that may also be the reason why I so far didn't find anything related on the web or on ServerFault, but maybe some of this rings a bell with someone? Or please direct me to what more info to post. I hope that the vmware.logs get unthrottled eventually (can't easily restart the hosts at the moment). Thanks for any input!

    Read the article

  • Creating MS Word 2010 Relative Links?

    - by leeand00
    Okay here is what I've tried so far for creating relative links in my MS Word Documents. In my document from the ribbon I select the File tab. I then select Info from the side bar. Click the properties drop down from the right hand column. (a bit difficult to find initially, since it looks like text not a drop down, but it's there). Click Advanced Properties The <document-name>.docx Properties Dialog Appears I enter .\ to specify that I want a relative path for the links in my document. I click OK. I go back into my document select some text and attempt to make a link out of it clicking the Insert tab of the ribbon, and then clicking Hyperlink. I then select a document from the current folder, and strip the full path from it, leaving just the name of the .docx file to which I wish to link. Then I click OK. The link appears, I try to click it using Ctrl+Click. I am informed that the address of the site is not valid. Check the address and try again. What could I possibly be doing wrong here? I just want a relative link. It's so easy in to do this in HTML.

    Read the article

  • p410i Mirror failed couldnt find same disk

    - by Heishiro Mitsurugi
    I have an HP server with an P410i RAID Card installed. I had two SATA Drives connected (250GB each). The RAID was configured as a Mirror. A few days ago the drive one (1) failed, and i had to remove it. Tried to find the same part number here in Venezuela, but i couldn't. So, i bought a 500GB SATA Drive, and connected it to the same bay where the 250GB failed drive was. When the server booted, it asked me if i wanted to rebuild the data. I selected the option for that, and Windows Server restarted properly. When i got into the ACU (Array Configuration Utility) it told me that it was rebuilding the data. Today the warning went away, and according to the ACU everything is just fine. My question is... What i did was right? Can i create a mirror from a 250GB disk in a 500GB disk using the p410i? I have done that before, but only using software RAID in Windows, and it just uses the space it needs. As a matter of fact, when did that using Windows i was able to use the remaining space in the bigger drive, but in the p410i i can't use it. Should i be worried? Thanks a lot in advance for any pointers or info that you could give on this. Heishiro

    Read the article

  • Output current with Teensy++ 2.0 (arduino-based hardware)

    - by omtinez
    I am working on a project with a Teensy++ 2.0 for testing, eventually the goal is to use a Teensy 2.0 (info on both available here) and mount it onto a robot R/C car along with a Raspberry Pi. I have been able to use and test one of the very cheap distance sensors that use ultrasound, which requires very little current. I was trying to power a motor, I don't know exactly what kind of motor but I assume a very low-power one which is what comes with the R/C car cheapo, but nothing is happening. When I plug the motor to GROUND and +5V it runs fine, but when I use GROUND and one of the GPIO pins then nothing happens with the motor. The same GPIO pins were tested to successfully power and run the ultrasound sensor, so the board is fine. My suspicion is that the GPIO pins don't output enough current to power the motor, but my knowledge of electronics is rather scarce (I am a computer scientist, not an electrical engineer). So please forgive me if I am asking something obvious or plain stupid, but does the board not have enough power to power the motor? If so, I could try to use a second power supply that would go straight into the motor and use the GPIO as a gate to turn that power on and off; would such thing work? Is there a better design that could be used?

    Read the article

  • Noob with git repository on Windows Storage Server 2008?

    - by HibbyHoo
    I have a Western Digital Sentinel at home running Windows Storage Server 2008 R2 Essentials. I have several git repositories on it for my own personal projects, and have no problem pushing and pulling over my local network. I want to be able to access those repos remotely from anywhere. I am able to log in and remotely access folders and files on it, but I cannot clone repos using the same address. It hangs for a REALLY long time before finally failing with an error: git.exe clone --progress -v "https://myIpAddressHere/Remote/fs/files.aspx?path=%5C%5Cmydevicename%5Cmyreposfolder%5Cmyrepo.git" "D:\repo" Cloning into 'D:\repo'... error: Failed connect to myIpAddress:443; No error while accessing https://myIpAddress/Remote/fs/files.aspx?path=%5C%5Cmydevicename%5Cmyreposfolder%5Cmyrepo.git/info/refs fatal: HTTP request failed git did not exit cleanly (exit code 128) I'm not too privy to networking or web development, and I have only a rudimentary understanding of how to use git (with TortoiseGit). I'm having a hard time finding search results for this specific problem and a hard time interpreting generic tutorials for the general scope of this problem. TortoiseGit version: 1.7.13.0. git version: 1.7.10.mysysgit.1.

    Read the article

  • Host to set up postfix to use external smtp server

    - by Leo
    I have a web server and a mail server. Both have the same domain name except, one points to mywebsite.com and the other is mail.mywebsite.com. They have different IPs. I'm trying to set up postfix on my web server so it uses my mail server as the server that sends e-mails. I followed this guide: http://www.howtoforge.com/postfix_relaying_through_another_mailserver I am getting this error in my logs: Oct 28 02:56:45 mywebsite postfix/smtp[1660]: warning: host mail.mywebsite.com[xxx.xxx.xx.xx]:25 greeted me with my own hostname mywebsite.com Oct 28 02:56:46 mywebsite postfix/smtp[1660]: warning: host mail.mywebsite.com[xxx.xxx.xx.xx]:25 replied to HELO/EHLO with my own hostname mywebsite.com I've searched around and I read that you can't use the same hostname when relaying to a separate smtp server. Is there a work around for this? Do I need to set up my mail server with a separate domain name? Also I have my MX records set up for both mywebsite.com and mail.mywebsite.com. I'm not that experienced with this so if I need to give more info let me know. Thanks!

    Read the article

  • Difference between "bit-number" in filesystem and that in OS (like 32,64 bit)?

    - by learner
    I encountered 2 terms ,"FAT32", a file system and "Windows Vista 32 bit". I found that the meaning of a 32 bit OS is that that the OS deals with data in chunks of minimum size 32 bits. I don't quite understand the depth of that, but I figure ,every file in that system with that OS should have a minimum size of 32 bits. I also read that these 32 bits are used to hold data of files' location(reference) and details. Which of it is it? I have also read that 4 GB of RAM is all that is needed at the most if you're on a 32 bit OS. But I don't understand why. If there are 32 bits to hold info about files and their locations,there can be 2^32 possible combinations of it. But I have found in many places,2^32 is divided by 1024 thrice to get 4GB. Why? Did that 2^32 become equal to 2^32 bytes? And about filesystems I read a similar explanation for what 32 means in FAT32. It is supposed to mean that 32 bits are used to number file system block. Now how is different from the number before the OS?

    Read the article

  • How are large companies handling the storing and cataloging of software installation disks?

    - by CT
    I just started working in the IT department of a small-medium sized construction company with about 200 users. One of my responsibilities is to setup and configure all new machines that come in. I would like suggestions on how to best manage the installation disks and licenses of the software that comes with them. Plus any additional licensed software such as Autocad, Photoshop, etc as well as peripheral driver disks such as printers and scanners. Right now every machine is associated and labeled with an asset id. All asset ids are kept in a spreadsheet with applicable serial numbers, current user, warranty info, and software licenses. The physical disks are then kept within a folder in a cabinet. Each folder is marked with the asset id number as well as the current user. My problems with this is that the system was not maintained very completely before I came to the company. There are plenty of software folders with no asset ids labeled on them. Plenty of missing software folders (most likely are a lot of the unlabeled folders). Folders with names but not asset ids. Machines get switched to different users without the folders and spreadsheet being updated. I am not saying this method would necessarily be bad if it was better implemented and managed, but if I am going to have to take a lot of time to fix this system currently in place. I thought I would ask the community first on how others manage this process in case there are easier, more efficient ways of doing so. Thank you.

    Read the article

  • Nagios escalation debugging

    - by Oesor
    I'm having some issues with escalations happening properly and I'm not sure if it's because of my config or because the nagios binary is nonstandard and something may be broken. I've got little experience with nagios, and just want to make sure this is being set appropriately. Should the following config file definition allow the escalations to take over and increment the notification interval as expected? Is there somewhere else in the config files I should be looking at to figure out what's going on? I've enabled debug 32 in the config and it's simply spitting out 'Host notification will NOT be escalated.' for each notification. The configuration does pass the pre flight check with no issues, and reports that it's parsing the three host escalations in the config. # test host definition define host { host_name test alias test address 10.0.0.10 hostgroups test check_interval 0 retry_interval 1 max_check_attempts 2 flap_detection_enabled 0 icon_image windows.png icon_image_alt LOGO - Windows vrml_image windows.png statusmap_image windows.png action_url /info/host/275 check_period 24x7 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master check_command check_host_15!-H $HOSTADDRESS$ -t 3 -w 500.0,80% -c 1000.0,100% parents nagios notifications_enabled 1 notification_interval 3 notification_period 24x7 notification_options u,d,r use host-global } define hostescalation{ host_name test first_notification 3 last_notification 4 notification_interval 10 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 4 last_notification 5 notification_interval 30 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 5 last_notification 0 notification_interval 240 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master }

    Read the article

  • apt unable to install particular version of package (but gives no error)

    - by Arc2009
    I'd like to install particular version of libstd++6 with following command: # apt-get install libstdc++6=4.9.0-8 -V Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libstdc++6 (4.8.2-16) 0 upgraded, 0 newly installed, 0 to remove and 216 not upgraded. It gives no error, but apt keeps version that was already installed. And also it refers to this package as "extra". There's no apt preferences set in /etc/apt/preferences.d. And the desirable version is definetely available through our local mirror. (If I try to run "apt-get download libstdc++6=4.9.0-8" it will download exactly desirable version.) System info: # cat /etc/issue.net "Debian GNU/Linux jessie/sid" # uname -a Linux www27 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 GNU/Linux. # dpkg -l |egrep -i "apt|dpkg" ii apt 0.9.16.1 amd64 commandline package manager ii dpkg 1.17.6 amd64 Debian package management system Any suggestions?

    Read the article

  • How to setup a virtual host in Ubuntu running on Amazon EC2 instance?

    - by Rade
    I have an app that's accessible via 1.2.3.4/myapp. The app is installed in /var/www/myapp. I've set up a subdomain(apps.mydomain.com) that points to 1.2.3.4. I want the server to point to var/www/myapp if I type apps.mydomain.com/myapp, how do I do that? I have experience creating virtual hosts(lots of them) locally but I'm lost because it's now in production and it's a little different. Here's my virtual host config: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName apps.mydomain.com/myapp DocumentRoot /var/www/myapp/public <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride All Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Any idea why I still see the files instead of pointing me to the document root? Just in case someone might ask, the app is based on Laravel 4 framework. It's really bad right now because anyone can access the files from the browser.

    Read the article

  • Using Plesk for webhosting on Ubuntu - Security risk or reasonably safe?

    - by user66952
    Sorry for this newb-question I'm pretty clueless about Plesk, only have limited debian (without Plesk) experience. If the question is too dumb just telling me how to ask a smarter one or what kind of info I should read first to improve the question would be appreciated as well. I want to offer a program for download on my website hosted on an Ubuntu 8.04.4 VPS using Plesk 9.3.0 for web-hosting. I have limited the ssh-access to the server via key only. When setting up the webhosting with Plesk it created an FTP-login & user is that a potential security risk that could bypass the key-only access? I think Plesk itself (even without the ftp-user-account) through it's web-interface could be a risk is that correct or are my concerns exaggerated? Would you say this solution makes a difference if I'm just using it for the next two weeks and then change servers to a system where I know more about security. 3.In other words is one less likely to get hacked within the first two weeks of having a new site up and running than in week 14&15? (due to occurring in less search results in the beginning perhaps, or for whatever reason... )

    Read the article

  • Matched or unmatched drives for RAID arrays?

    - by Will
    Looking around there is conflciting information on this, with some strongly suggesting one or the other. From my understanding the issue with matched drives is that the wear on both drives is more or less the same, so the potential for the second drive failing with or very soon after the first is pretty high. People also claim matched drives give substianatally higher performance however assuming the unmatched drives are more or less the same (eg 2, 1 TB STATA II 7200rpm drives with 32MB cache), would the minor differences between say a Seagate and a Western Digital one (say one has a 128MB/s read rate, and the other a 150MB/s read rate, as well as I guess various other minor differences) actually cause any notable performance loss, ie potentialy worse than two matched 128MB/s drives, or does RAID not really care and give you essentially an optimal solution (eg upto 278MB/s total read speed for RAID 0 and 1) and similar for other RAID with more "unmatched" drives (5 and 1+0 come to mind as possibilities)? Also I couldnt find much info on how this is different on different RAID setups, eg RAID 0 or RAID 1, software or hardware RAID, etc. I'm assuming such things have an effect, and thats it's not all the same for RAID in general?

    Read the article

  • Windows 7 VM log on lockout

    - by AKa
    My Windows 7 XP Mode virtual machine has just locked me out of password log on. Two years of use and it never required I use a password on wake up, I never asked for that. Suddenly yesterday, password required! I located password and used it successfully a couple of times, but now even that is not good enough! Perhaps (unfairly) because I tried to get to the bottom of the new phenomenon and removed the password from the user accounts? Permissions are still set to ok for all users. I have been all the way through the settings I can access with the VM file hibernated, and have deleted the previously saved log on info, which always previously worked automatically as charged. Now when I attempt to log on it asks me for credentials, seems like progress, but when I offer them, and check the "remember my credentials" box, I still get the splash screen "The system could not log you on. [reminder about caps...]" !! Round and round. Back up and restore point versions of the VM toss me back into the same log on loop. There are no other machines on any network, I am the administrator and sole user. It must be specifically about the log on, a speck of dust corruption ... is there a way around this? I tried creating a new VM but the black inner box gets stuck at one point requesting I insert a boot disc. Thanks for input, AKa

    Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >