Search Results

Search found 31973 results on 1279 pages for 'network library'.

Page 337/1279 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

  • x11vnc is slow, but using only 10% of available bandwidth

    - by mmm
    I am using x11vnc over 15Mbit/s network with 20ms latency. When the screen is changing a lot x11vnc is slow - for example when I switch a tab in a browser, it takes almost two seconds until the view is fully redrawn. The strange thing is that max connection speed of x11vnc is even during slow redrawing only about 10% of the available bandwidth. Why is x11vnc not using available bandwidth to speed the redrawing up? For example scp is using 100% of available bandwidth without problems. How can I identify what is the bottleneck for x11vnc on my system? So far I think: 10% network usage = network is not a bottleneck fb read rate: 601 MB/sec = reading fb is not a bottleneck Any ideas how can I further profile x11vnc and find out what is causing a slowdown? For example is there any switch for x11vnc to show how much data it is handling and how long it takes to grab a screen, process and compress it and send it over the network?

    Read the article

  • CouchDB crashes at startup when path to config file has space(s)

    - by Barry Wark
    I'm hoping to run CouchDB as a per-user Launch Agent on OS X. I'm using the coucdbx-core folder from the CouchDB Server.app as the base of my CouchDB deployment. I'd like each user to have their own couch instance (on a different port), necessitating separate config files for each instance. The logical place to put these files is in ~/Library/Application Support/ for each user. I can put the entire distribution in ~/Library/Application Support/my-app/coucdbx, and put the .ini at ~/Library/Application Support/my-app/local.ini. Starting couchdb as bin/couchdb -a ../local.ini (from ~/Library/Application Support/my-app/coucdbx) works great. But I'd like to save every user the ~50MB couchdbx and install the couchdbx-core in a shared location (e.g. within my app's .app bundle). When I do this, the path to the per-user config file contains a space, and I get the following error when starting CouchDB: $ bin/couchdb -n -a ~/Library/Application\ Support/us.physion.ovation/default.ini {"init terminating in do_boot",{{badmatch,{error,{bad_return,{{couch_app,start,[normal,["/Users/hs/prj/build-couchdb/build/etc/couchdb/default.ini","/Users/hs/prj/build-couchdb/build/etc/couchdb/local.ini"]]},{'EXIT',{{badmatch,{error,{error,enoent}}},[{couch_server_sup,start_server,1,[{file,"/Users/hs/prj/build-couchdb/dependencies/couchdb/src/couchdb/couch_server_sup.erl"},{line,56}]},{application_master,start_it_old,4,[{file,"application_master.erl"},{line,274}]}]}}}}}},[{couch,start,0,[{file,"/Users/hs/prj/build-couchdb/dependencies/couchdb/src/couchdb/couch.erl"},{line,18}]},{init,start_it,1,[]},{init,start_em,1,[]}]}} Is there any way to provide a config file at the command line, if that config file's path includes space(s)? Despite my best efforts in the mailing list archives, wiki and google, I haven't been able to find a solution or a definitive "it can't work". Any help greatly appreciated.

    Read the article

  • Login to OS X Server User Account from Local Computer

    - by Brod Wilkinson
    I have OS X Server installed on a mac mini. I've created several User accounts, one of which is Account Name: Bob Password: abc123 From the Mac Mini's login screen I can choose "Server" (main account) "Bob" (Bobs account) and "Other..." OS X Server Accounts, from "Other..." if I input Bobs credentials it will log me in. I also have a macbook air, I would like to be able to select from the Login Screen "Other..." input Bobs credentials and have it login to Bobs account, or any other User Account for that matter. My Server is setup as private with the server address: server.network.private Following some googled instructions as well as apples very own instructions I have: Setup an Open Directory with Username: diradmin Password: abc123 Then on the macbook air gone into System Preferences > Users & Groups > Login Options and clicked Join next to Network Account Server, input my server (server.network.private) with diradmin credentials and its connected. Great. I've also ticked Allow Network Users to Login and Login Window and selected All Users. I was assuming this would allow my macbook air to login to the "Bob" account by selecting "Other..." from the login window although there is no "Other..." option. I then setup a VPN, basic credentials, logged into it on the macbook air and still not much has changed. I am able to share screens with the "Bob" account form my macbook air by logging in by clicking Share Screen... from the Finder under Shared > Network Server and then clicking Login In but this obviously requires the macbook air to already be logged into an account before it can share screens which is not suitable. Is there any way to simply login to the OS X Server User Account from the macbook air's login screen via the "Other..." like it does on the mac mini's login screen? Thanks in advance. Operating System: OS X 10.9 Mavericks OS X Server: Version 3

    Read the article

  • Installing MySQL 5.1 on OS X 10.7 Lion

    - by xisal
    I am trying to install MySQL 5.1. I am on Lion, and when I remove all files associated with MySQL on my machine it still tells me that I have a newer version installed when I try to install it from the DMG file. Has anyone successfully installed MySQL 5.1 on Lion? I found a solution using Homebrew: Completely remove MySQL from your system (just in case) sudo rm /usr/local/mysql sudo rm -rf /usr/local/mysql* sudo rm -rf /Library/StartupItems/MySQLCOM sudo rm -rf /Library/PreferencePanes/My* vim /etc/hostconfig and removed the line MYSQLCOM=-YES- rm -rf ~/Library/PreferencePanes/My* sudo rm -rf /Library/Receipts/mysql* sudo rm -rf /Library/Receipts/MySQL* sudo rm -rf /var/db/receipts/com.mysql.* Source:http://stackoverflow.com/questions/1436425/how-do-you-uninstall-mysql-from-mac-os-x Install homebrew /usr/bin/ruby -e "$(curl -fsSL https://raw.github.com/gist/323731)" Source: https://github.com/mxcl/homebrew/wiki/installation Install MySQL 5.1 via brew brew install mysql51 if that doesn't work, do this: brew install https://raw.github.com/adamv/homebrew-alt/master/versions/mysql51.rb Source: http://stackoverflow.com/questions/4359131/brew-install-mysql-on-mac-os/6399627#6399627 Make MySQL Work Create mysql.sock file touch /tmp/mysql.sock Install MySQL default tables /usr/local/Cellar/mysql51/5.1.58/bin/mysql_install_db ...or your path Source: http://stackoverflow.com/questions/4788381/getting-cant-connect-through-socket-tmp-mysql-when-installing-mysql-on-ma/5140849#5140849

    Read the article

  • Slow transfer speed between two servers

    - by Linux Guy
    I have two servers both network cards speed is 10Gbps The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.1 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.1, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.0 port 38895 connected with 0.0.0.1 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service the connection will be ok , after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

    Read the article

  • The power of explicit social networks

    - by me
    Last week I had the pleasure to write a guest post on the Oracle WebCenter blog  with the topic The Power of Social Recommendations where I described Implicit and Explicit Social Recommendations models and how they relate to a Social Engagement Strategy. Now let's look at a real live example. Apple has implemented an explicit Social Network model with So what ? Users do this already on Facebook and Twitter!  (see ZDNet blog post : Ping: Apple should leave social to Facebook, Twitter) BUT there are some major  advantages: "100 % control over the explicit Social Network ->  direct customer relationship without a social intermediary like Facebook or Twitter Total  access to the Social Graph ->  own the Social Graph data from their users and no need to "buy" it from external social network providers Integrated into the core business model ->  harvest all Social Graph data  to provide  highly personalized and trusted recommendations Isn't this the dream of any company which thinks about their social media strategy?  and guess what - Oracle Social Network is all about this - building explicit Social Networks with seamless integration into  your core business processes and applications follow me on twitter:  http://twitter.com/peterreiser Enterprise2.0, enterprise2.0, social networks, social media, apple

    Read the article

  • How to share media stored in an attached drive using Windows Media Player?

    - by David
    We've got a Windows 7 PC with a Windows Media Player music library that includes both files on the internal hard drive and files on a USB-attached hard drive. When we browse this library from another Windows Media Player (on another Windows 7 machine) we see only the files residing on the library host's internal drive. The files residing on the attached drive don't show up at all, yet on the host they appear undistinguished within the library. Is there a configuration change we can make to cause the attached files to be shared properly? We've turned on read-sharing for "Everyone" on the USB drive, but that hasn't helped. Also it might be worth noting that this issue behaves the same way for us if the client machine is a Playstation 3.

    Read the article

  • ADDS: 1 - Introducing and designing

    - by marc dekeyser
    Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} What is ADDS?  Every Microsoft oriented infrastructure in today's enterprises will depend largely on the active directory version built by Microsoft. It is the foundation stone on which all other products (Exchange, update services, office communicator, the system center family, etc) rely on to get their information. And that is just looking at it from an infrastructure perspective. A well designed and implemented Active Directory implementation makes life for IT personnel and user alike a lot easier. Centralised management and the abilities opened up  by having it in place are ample.  But what is Active Directory Domain Services? We can look at ADDS as a centralised directory containing all objects your infrastructure runs on in one way or another. Since it is a Microsoft product you'll obviously not be seeing linux or mac clients listed in here (exceptions exist) but in general we can say it contains everything your company has in place in one form or another.  The domain name services. The domain naming service (or DNS for short) is a service which translates IP address (the identifiers for each computer in your domain) into readable and easy to understand names. This service is a prequisite for ADDA to work and having wrong record in a DNS server will make any ADDS service fail. Generally speaking a DNS service will be run on the same server as the ADDS service but it is worth wile to remember that this is not necessary. You could, for example, run your DNS services on a linux box (which would need special preparing to host an ADDS integrated DNS zone) and run the ADDS service of another box… Where to start? If the aim is to put in place a first time implementation of ADDS in your enterprise there are plenty of things to consider depending on what you are going to do in the long run. Great care has to be taken when first designing and implementing as having it set up wrong will cause a headache down the line. It is for that reason that I like to start building from the bottom up and start with a generic installation of ADDS (which will still differ for every client) and make it adaptable for future services which can hook in to the existing environment. Adapting existing environments is out of scope for this document (and series) although it is possible to take the pointers and change your existing environment to run in a smoother manor. Take great care when changing things as one small slip of the hand can give you a forest wide failure… Whenever starting with an ADDS deployment I ask the client the following questions:  What are your long term plans and goals?  How flexible do you want it? Are you currently linux heavy and want to keep this or can we go for an all Microsoft design? Those three questions should give some sort of indicator what direction can be taken and if the client has thought about some things themselves :).  The technical side of things  What is next to consider is what kind of infrastructure is already in place. For these series I'll keep it simple and introduce some general concepts without going in to depth on integrating ADDS with other DNS services.  Building from the ground up means we need to consider our layers on which our infrastructure will rely. In my view that goes as follows:  Network (WAN/LAN links and physical sites DNS Namespacing All in one domain or split up in different domains/forests? Security (both for ADDS and physical sites) The network side of things  Looking at how the network is currently set up can potentially teach us a large deal about the client. Do they have multiple physical site? What network speeds exist between these sites, etc… Depending on this information we will design our site links (which controls replication) in future stages. DNS Namespacing Maybe the single most intresting thing to know is what the domain will be named (ADDS will need a DNS domain with the same name) and where this will be hosted. Note that active directory can be set up with a singe name (aka contoso instead of contoso.com) but it is highly recommended to never do this. If you do end up with a domain like that for some reason there will be a lot of services that are going to give you good grief in the future (exchange being one of them). So one of the best practises would be always to use a double name (contoso.com or contoso.lan for example). Internal namespace A single namespace is just what it sounds like. You have a DNS domain which is different internally from what the client has as an external namespace. f.e. contoso.com as an external name (out on the internet) and contoso.lan on the internal network. his setup is has its advantages in that you have more obscurity from the internet in the DNS side of this but it will require additional work to publish services to the web. External namespace Quite like the internal namespace only here you do not differ the internal namespace of the company from what is known on the internet. In this implementation you would host your own DNS servers for the external domain inside the network. Or in other words, any external computer doing a DNS lookup would contact your internal DNS server for the resolution. Generally speaking this set up is a bad idea from the security side of things. Split DNS Whilst using an external namespace design is fairly easy it involves a lot of security risks. Opening up you ADDS DSN servers for lookups exposes your entire network to the internet and should be avoided at any cost. And that is where the "split DNS" design comes in. In this setup up would still have the same namespace internally and externally but you would be using different DNS servers for lookups on the external network who have no records of your internal resources unless you explicitly publish them. All in one or not? In determining your active directory design you can look at the following possibilities:  Single forest, Single domain Single forest, multiple domains Multiple forests, multiple domains I've listed the possibilities for design in increasing order of administrative magnitude. Microsoft recommends trying to use a single forest, single domain in as much situations as possible. It is, however, always possible that you require your services to be seperated from your users in a resource forest with trusts set up between the different forests. To start out I would go with the single forest design to avoid complexity unless there are strict requirements to have multiple forests. Security What kind of security is required on the domain and does this reflect the physical security on the sites? Not every client can afford to have a domain controller in a secluded server room on every site and it is exactly for that reason that Microsoft introduced the RODC (read only domain controller). A RODC is a domain controller that has been limited in functionality, in essence it will only cache the data you explicitly tell it to cache and in the case of a DC compromise (it being stolen) only a limited number of accounts will need to be affected. Th- Th- Th- That’s all folks! Well at least for now! In future editions of this series we’ll be walking through the different task that need to be done and the thought which needs to be put in to it. But for all editions we’ll be going from the concept of running a single forest, single domain with a split DNS setup… See you next time!

    Read the article

  • Why wireless adatper stop to work?

    - by AndreaNobili
    today I correctly installed the driver for the TP-LINK TL-WN725N USB wireless adapter on my RaspBerry Pi (I use RaspBian that is a Debian), then I setted up the wifi using the wpa-supplicant as explained in this tutorial: http://www.maketecheasier.com/setup-wifi-on-raspberry-pi/ This worked fine untill this evening. Then suddenly it stopped to work when I try to connect in SSH and the Raspberry is on the wireless (or rather it should be, as this is not in the list of my router's DHCP connected Client) The strange thing is that the USB wirless adapter blink so I think that this is not a driver problem. If I try to connect it by the ethernet I have no problem. It appear in my router's DHCP connected Client and I can connect to it by SSH. When I connect to it using ethernet if I perform an ifconfig command I obtain: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.9 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:59 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6006 (5.8 KiB) TX bytes:8268 (8.0 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1104 (1.0 KiB) TX bytes:1104 (1.0 KiB) wlan0 Link encap:Ethernet HWaddr e8:94:f6:19:80:4c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So it seems that the wlan0 USB wireless adapter driver is correctly loaded. If I remove the USB wireless adapter and put it again into the USB port, the lasts lines of dmesg log is: [ 20.303172] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 20.306340] RTL871X: set bssid:00:00:00:00:00:00 [ 20.306726] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9aD\xffffffa7\x1a\xffffffa0\x1a\xffffff8b] fw_state=0x00000008 [ 21.614585] RTL871X: indicate disassoc [ 21.908495] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 25.006282] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS [ 26.247997] RTL871X: nolinked power save enter As you can see some of these line are related to the RTL871X that is my USB wireless adapter, but I don't know is that these line report an error or if it is all ok. Looking at the adapter status I obtain: pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff As you can see the mode is DORMANT but I think that this is normal because now I am connected using ethernet. I tryied to set up the adapter but it seems that I obtain no result, infact: pi@raspberrypi ~ $ sudo ip link set dev wlan0 up pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff pi@raspberrypi ~ $ sudo ip link set dev wlan0 up This is my /etc/network/interfaces file content and it is ok: auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp and it is the /etc/wpa_supplicant/wpa_supplicant.conf that I think is ok (I did not change it compared to when it worked): ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="MY-NETWORK" psk="mypassword" key_mgmt=WPA-PSK } and infact if I execute a network scan I correctly find MY-NETWORK in the network list,infact: pi@raspberrypi ~ $ sudo iwlist wlan0 scan | grep ESSID ESSID:"TeleTu_74888B0060AD" ESSID:"MY-NETWORK" ESSID:"FASTWEB-1-PT6NtjL4TOSe" ESSID:"DC" So I reboot the system and I remove the ethernet cable but when I try to connect again to my raspberry I obatin the following error message: andrea@andrea-virtual-machine:~$ sudo ssh [email protected] ssh: connect to host 192.168.1.9 port 22: No route to host It seems that it can't connect using wireless. What could be the problem? What am I missing? How can I solve this situation? Tnx

    Read the article

  • second ip address on the same interface but on a different subnet

    - by fptstl
    Is it possible in CentOS 5.7 64bit to have a second IP address on one interface (eg. eth0) - alias interface configuration - in a different subnet? Here is the original config for eth0 more etc/sysconfig/network-scripts/ifcfg-eth0 # Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.91.255 HWADDR=00:1D:09:FE:DA:04 IPADDR=192.168.91.250 NETMASK=255.255.255.0 NETWORK=192.168.91.0 ONBOOT=yes And here is the config for eth0:0 more etc/sysconfig/network-scripts/ifcfg-eth0:0 # Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express DEVICE=eth0:0 BOOTPROTO=static BROADCAST=10.10.191.255 DNS1=10.10.15.161 DNS2=10.10.18.36 GATEWAY=10.10.191.254 HWADDR=00:1D:09:FE:DA:04 IPADDR=10.10.191.210 NETMASK=255.255.255.0 NETWORK=10.39.191.0 ONPARENT=yes How would the resolv.conf file should change since there are two different gateways? Any other change needed?

    Read the article

  • Creating virtual switch in VMware

    - by MJI
    We are trying to add a network using vsphere client for VMkernel port while creating a virtual switch. But it prompts us a red cross between the physical adapter and VMkernel port. We did test all the network cables and the network adapters. We tried creating virtual switch for service console but no gains. We have used NIC's which are VMware certified. I have even tried to update bios to check the hardware compatibility but didn't work.

    Read the article

  • How to disable Tcp/Ip settings in windows 7 via GPO?

    - by Akash Kava
    I have enabled following policies, "Prohibit TCP/IP advanced connection" "Prohibit access to properties of components of a LAN connection" "Enable Windows 2000 Network Connections setings for Administrators" after doing all these, all machines running windows xp, 2000 and vista have network settings properties button disabled as expected. However all machines running windows 7 have no effect, I believe there are few more steps, all Windows 7 machines are on domain and we want to control this via Domain Controler's GPO. Please let me know, what I need to do to have Windows 7 disable the properties of network connection, I am not network expert, I read few articles about what new has been added in GPO of windows 7 but I am blank. Everything works fine on Windows XP, Vista, 2003 Server. Only Windows 7 is a problem.

    Read the article

  • How is virtual machine port opening works

    - by Xianlin
    I have a question regarding VM port. Say I have a Virtual Machine and a Host Machine. The opening ports on Host are 80, 22, 443 only. if I opened ports 80, 22, 443 VM it should be working. However if I opened port 21 on VM, will it work? If it works, does it mean the port 21 on Host is opened also? My understanding is that the network traffic goes from VM's virtual network adapter to Host's physical network adapter. So the ports on these 2 network adapters should match. Am I correct to say this?

    Read the article

  • Playlist Generator for Winamp

    - by Force Flow
    I'm running Winamp 5.63 on Windows 7 x64. The built-in playlist generator crashes every time it scans the media library. From what I've read, if a library grows beyond 6,000 tracks, this is the typical behavior of the gracenote plugin. My library has far exceeded that. I attempted to use the abandoned MixerIP plugin, but all that did was wipe out my media library after being installed in Winamp. So, it doesn't look like that option is viable. Are there any other playlist generators out there? Not random playlist generators, but generators that actually find similar music to a seed song or songs.

    Read the article

  • 802.11N Windows XP Clients Unable to See Each Other

    - by zippy_raggle
    I am attempting to update my wireless network from 802.11g to 802.11n. When connected to the 'G' access point, the client laptops (there are 7 running Windows XP) are able to connect and browse the network for each other. When I connect them to the 'N' access point they can see the access point, but not the rest of the network. I tried swapping out the access point with a wireless router, but this did not change anything. I verified in both the AP and the router that isolation was turned off. Searching the web has not turned up any other ideas. The manuals don't show anything either. Why can't my wireless client nodes see each other on the 'N' network?

    Read the article

  • Debian Linux bridging router intermittently dropping packets [migrated]

    - by nomen
    My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Can anybody help?

    Read the article

  • Transparent Squid : Logging client ip problem

    - by llazzaro
    Hello, I am using the following rules in iptables in my network to use a transparent proxy * iptables -t nat -A PREROUTING -i eth0 -s ! squid-box -p tcp --dport 80 -j DNAT --to squid-box:3128 * iptables -t nat -A POSTROUTING -o eth0 -s local-network -d squid-box -j SNAT --to iptables-box * iptables -A FORWARD -s local-network -d squid-box -i eth0 -o eth0 -p tcp --dport 3128 -j ACCEPT But my squid log, always logs gateway IP (172.16.0.1) Do you know an alternative to not lose client IP? (of course avoid saing manual proxy setup!)

    Read the article

  • Change the order of DNS lookup when connected in the VPN

    - by qwerty2010
    Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

    Read the article

  • Need a good mp3/internet radio organization system...

    - by Zombies
    So I feel that winamp alone doesn't work well for me. I have this one playlist that all kinds of stuff gets crammed into. I need a system (this can easily be 1 program or several): Need to be able to... play mp3's from my library (just a directory structure with mp3's). Save radio station's, and easily remove/add new stations play random mp3's which are not part of my library and will probably be deleted in the future, yet won't clutter my library index!

    Read the article

  • SSH: Connection Reset by Peer

    - by hopeless
    I have a Solaris 10 server on another network. I can ping it and telnet to it, but ssh doesn't connect. PuTTY log contains nothing of interest (they both negotiate to ssh v2) and then I get "Event Log: Network error: Software caused connection abort". ssh is defintely running: svcs -a | grep ssh online 12:12:04 svc:/network/ssh:default Here's an extract from the server's /var/adm/messages (anonymised) Jun 8 19:51:05 ******* sshd[26391]: [ID 800047 auth.crit] fatal: Read from socket failed: Connection reset by peer However, if I telnet to the box, I can login to ssh locally. I can also ssh to other (non-Solaris) machines on that network fine so I don't believe that it's a network issue (though, since I'm a few hundred miles away, I can't be sure). The server's firewall is disabled, so that shouldn't be a problem root@******** # svcs -a | grep -i ipf disabled Apr_27 svc:/network/ipfilter:default Any ideas what I should start checking? Update: Based on the feedback below, I've run sshd in debug mode. Here's the client output: $ ssh -vvv root@machine -p 32222 OpenSSH_5.0p1, OpenSSL 0.9.8h 28 May 2008 debug2: ssh_connect: needpriv 0 debug1: Connecting to machine [X.X.X.X] port 32222. debug1: Connection established. debug1: identity file /home/lawrencj/.ssh/identity type -1 debug1: identity file /home/lawrencj/.ssh/id_rsa type -1 debug1: identity file /home/lawrencj/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version Sun_SSH_1.1 debug1: no match: Sun_SSH_1.1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.0 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer And here's the server output: root@machine # /usr/lib/ssh/sshd -d -p 32222 debug1: sshd version Sun_SSH_1.1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: Bind to port 32222 on ::. Server listening on :: port 32222. debug1: Bind to port 32222 on 0.0.0.0. Server listening on 0.0.0.0 port 32222. debug1: Server will not fork when running in debugging mode. Connection from 1.2.3.4 port 2652 debug1: Client protocol version 2.0; client software version OpenSSH_5.0 debug1: match: OpenSSH_5.0 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-Sun_SSH_1.1 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible Unknown code 0 ) debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer debug1: Calling cleanup 0x4584c(0x0) This line seems a likely candidate: debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible

    Read the article

  • Cisco ASA - Enable communication between same security level

    - by Conor
    I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

    Read the article

  • Solaris: What comes next?

    - by alanc
    As you probably know by now, a few months ago, we released Solaris 11 after years of development. That of course means we now need to figure out what comes next - if Solaris 11 is “The First Cloud OS”, then what do we need to make future releases of Solaris be, to be modern and competitive when they're released? So we've been having planning and brainstorming meetings, and I've captured some notes here from just one of those we held a couple weeks ago with a number of the Silicon Valley based engineers. Now before someone sees an idea here and calls their product rep wanting to know what's up, please be warned what follows are rough ideas, and as I'll discuss later, none of them have any committment, schedule, working code, or even plan for integration in any possible future product at this time. (Please don't make me force you to read the full Oracle future product disclaimer here, you should know it by heart already from the front of every Oracle product slide deck.) To start with, we did some background research, looking at ideas from other Oracle groups, and competitive OS'es. We examined what was hot in the technology arena and where the interesting startups were heading. We then looked at Solaris to see where we could apply those ideas. Making Network Admins into Socially Networking Admins We all know an admin who has grumbled about being the only one stuck late at work to fix a problem on the server, or having to work the weekend alone to do scheduled maintenance. But admins are humans (at least most are), and crave companionship and community with their fellow humans. And even when they're alone in the server room, they're never far from a network connection, allowing access to the wide world of wonders on the Internet. Our solution here is not building a new social network - there's enough of those already, and Oracle even has its own Oracle Mix social network already. What we proposed is integrating Solaris features to help engage our system admins with these social networks, building community and bringing them recognition in the workplace, using achievement recognition systems as found in many popular gaming platforms. For instance, if you had a Facebook account, and a group of admin friends there, you could register it with our Social Network Utility For Facebook, and then your friends might see: Alan earned the achievement Critically Patched (April 2012) for patching all his servers. Matt is only at 50% - encourage him to complete this achievement today! To avoid any undue risk of advertising who has unpatched servers that are easier targets for hackers to break into, this information would be tightly protected via Facebook's world-renowned privacy settings to avoid it falling into the wrong hands. A related form of gamification we considered was replacing simple certfications with role-playing-game-style Experience Levels. Instead of just knowing an admin passed a test establishing a given level of competency, these would provide recruiters with a more detailed level of how much real-world experience an admin has. Achievements such as the one above would feed into it, but larger numbers of experience points would be gained by tougher or more critical tasks - such as recovering a down system, or migrating a service to a new platform. (As long as it was an Oracle platform of course - migrating to an HP or IBM platform would cause the admin to lose points with us.) Unfortunately, we couldn't figure out a good way to prevent (if you will) “gaming” the system. For instance, a disgruntled admin might decide to start ignoring warnings from FMA that a part is beginning to fail or skip preventative maintenance, in the hopes that they'd cause a catastrophic failure to earn more points for bolstering their resume as they look for a job elsewhere, and not worrying about the effect on your business of a mission critical server going down. More Z's for ZFS Our suggested new feature for ZFS was inspired by the worlds most successful Z-startup of all time: Zynga. Using the Social Network Utility For Facebook described above, we'd tie it in with ZFS monitoring to help you out when you find yourself in a jam needing more disk space than you have, and can't wait a month to get a purchase order through channels to buy more. Instead with the click of a button you could post to your group: Alan can't find any space in his server farm! Can you help? Friends could loan you some space on their connected servers for a few weeks, knowing that you'd return the favor when needed. ZFS would create a new filesystem for your use on their system, and securely share it with your system using Kerberized NFS. If none of your friends have space, then you could buy temporary use space in small increments at affordable rates right there in Facebook, using your Facebook credits, and then file an expense report later, after the urgent need has passed. Universal Single Sign On One thing all the engineers agreed on was that we still had far too many "Single" sign ons to deal with in our daily work. On the web, every web site used to have its own password database, forcing us to hope we could remember what login name was still available on each site when we signed up, and which unique password we came up with to avoid having to disclose our other passwords to a new site. In recent years, the web services world has finally been reducing the number of logins we have to manage, with many services allowing you to login using your identity from Google, Twitter or Facebook. So we proposed following their lead, introducing PAM modules for web services - no more would you have to type in whatever login name IT assigned and try to remember the password you chose the last time password aging forced you to change it - you'd simply choose which web service you wanted to authenticate against, and would login to your Solaris account upon reciept of a cookie from their identity service. Pinning notes to the cloud We also all noted that we all have our own pile of notes we keep in our daily work - in text files in our home directory, in notebooks we carry around, on white boards in offices and common areas, on sticky notes on our monitors, or on scraps of paper pinned to our bulletin boards. The contents of the notes vary, some are things just for us, some are useful for our groups, some we would share with the world. For instance, when our group moved to a new building a couple years ago, we had a white board in the hallway listing all the NIS & DNS servers, subnets, and other network configuration information we needed to set up our Solaris machines after the move. Similarly, as Solaris 11 was finishing and we were all learning the new network configuration commands, we shared notes in wikis and e-mails with our fellow engineers. Users may also remember one of the popular features of Sun's old BigAdmin site was a section for sharing scripts and tips such as these. Meanwhile, the online "pin board" at Pinterest is taking the web by storm. So we thought, why not mash those up to solve this problem? We proposed a new BigAddPin site where users could “pin” notes, command snippets, configuration information, and so on. For instance, once they had worked out the ideal Automated Installation manifest for their app server, they could pin it up to share with the rest of their group, or choose to make it public as an example for the world. Localized data, such as our group's notes on the servers for our subnet, could be shared only to users connecting from that subnet. And notes that they didn't want others to see at all could be marked private, such as the list of phone numbers to call for late night pizza delivery to the machine room, the birthdays and anniversaries they can never remember but would be sleeping on the couch if they forgot, or the list of automatically generated completely random, impossible to remember root passwords to all their servers. For greater integration with Solaris, we'd put support right into the command shells — redirect output to a pinned note, set your path to include pinned notes as scripts you can run, or bring up your recent shell history and pin a set of commands to save for the next time you need to remember how to do that operation. Location service for Solaris servers A longer term plan would involve convincing the hardware design groups to put GPS locators with wireless transmitters in future server designs. This would help both admins and service personnel trying to find servers in todays massive data centers, and could feed into location presence apps to help show potential customers that while they may not see many Solaris machines on the desktop any more, they are all around. For instance, while walking down Wall Street it might show “There are over 2000 Solaris computers in this block.” [Note: this proposal was made before the recent media coverage of a location service aggregrator app with less noble intentions, and in hindsight, we failed to consider what happens when such data similarly falls into the wrong hands. We certainly wouldn't want our app to be misinterpreted as “There are over $20 million dollars of SPARC servers in this building, waiting for you to steal them.” so it's probably best it was rejected.] Harnessing the power of the GPU for Security Most modern OS'es make use of the widespread availability of high powered GPU hardware in today's computers, with desktop environments requiring 3-D graphics acceleration, whether in Ubuntu Unity, GNOME Shell on Fedora, or Aero Glass on Windows, but we haven't yet made Solaris fully take advantage of this, beyond our basic offering of Compiz on the desktop. Meanwhile, more businesses are interested in increasing security by using biometric authentication, but must also comply with laws in many countries preventing discrimination against employees with physical limations such as missing eyes or fingers, not to mention the lost productivity when employees can't login due to tinted contacts throwing off a retina scan or a paper cut changing their fingerprint appearance until it heals. Fortunately, the two groups considering these problems put their heads together and found a common solution, using 3D technology to enable authentication using the one body part all users are guaranteed to have - pam_phrenology.so, a new PAM module that uses an array USB attached web cams (or just one if the user is willing to spin their chair during login) to take pictures of the users head from all angles, create a 3D model and compare it to the one in the authentication database. While Mythbusters has shown how easy it can be to fool common fingerprint scanners, we have not yet seen any evidence that people can impersonate the shape of another user's cranium, no matter how long they spend beating their head against the wall to reshape it. This could possibly be extended to group users, using modern versions of some of the older phrenological studies, such as giving all users with long grey beards access to the System Architect role, or automatically placing users with pointy spikes in their hair into an easy use mode. Unfortunately, there are still some unsolved technical challenges we haven't figured out how to overcome. Currently, a visit to the hair salon causes your existing authentication to expire, and some users have found that shaving their heads is the only way to avoid bad hair days becoming bad login days. Reaction to these ideas After gathering all our notes on these ideas from the engineering brainstorming meeting, we took them in to present to our management. Unfortunately, most of their reaction cannot be printed here, and they chose not to accept any of these ideas as they were, but they did have some feedback for us to consider as they sent us back to the drawing board. They strongly suggested our ideas would be better presented if we weren't trying to decipher ink blotches that had been smeared by the condensation when we put our pint glasses on the napkins we were taking notes on, and to that end let us know they would not be approving any more engineering offsites in Irish themed pubs on the Friday of a Saint Patrick's Day weekend. (Hopefully they mean that situation specifically and aren't going to deny the funding for travel to this year's X.Org Developer's Conference just because it happens to be in Bavaria and ending on the Friday of the weekend Oktoberfest starts.) They recommended our research techniques could be improved over just sitting around reading blogs and checking our Facebook, Twitter, and Pinterest accounts, such as considering input from alternate viewpoints on topics such as gamification. They also mentioned that Oracle hadn't fully adopted some of Sun's common practices and we might have to try harder to get those to be accepted now that we are one unified company. So as I said at the beginning, don't pester your sales rep just yet for any of these, since they didn't get approved, but if you have better ideas, pass them on and maybe they'll get into our next batch of planning.

    Read the article

  • How to Fix Mail Server SSL?

    - by Noah Goodrich
    Our mail server was originally setup using self-created certificates, however when those expired and I tried to recreate them, the whole thing just blew up. Since I know it will be important, we are running a Debian server and Postfix. Now I see these errors generated in the mail logs: May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: cannot get certificate from file /etc/postfix/ssl/smtpd.cert May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: TLS library problem: 22901:error:02001002:system library:fopen:No such file or directory:bss_file.c:352:fopen('/etc/postfix/ssl/smtpd.cert','r'): May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: TLS library problem: 22901:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:354: May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: TLS library problem: 22901:error:140DC002:SSL routines:SSL_CTX_use_certificate_chain_file:system lib:ssl_rsa.c:720: May 15 08:06:34 letterpress postfix/smtpd[22901]: cannot load RSA certificate and key data And when trying to access email from a client like Thunderbird from outside our local network, you receive "Unable to connect to smtp server". Update: I have verified that the file does exist. The current owner of the file is root:root. Does this need to be changed?

    Read the article

  • How to ping virtualbox guest machine by hostname? [migrated]

    - by Punit Soni
    Here is the summary. VirtualBox 4.2.18 Host OS: Windows 7 Guest OS: Ubuntu 12.04 Networking: Bridged Adaptor I can ping Host and other machines in host's network from ubuntu guest using hostnames. But, I can only ping the guest machine using IP address from host and network machines. I have avahi-daemon running on Guest OS. I want to be able to ping/ssh the guest machine from host and other machines on network using hostname of the guest machine. Please help.

    Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >