Search Results

Search found 34836 results on 1394 pages for 'off the shelf software'.

Page 337/1394 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

  • Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

    - by dash-tom-bang
    Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced (a 250G SimpleShare which works well enough but I was always afraid of losing the one disk). The Dashboard seems to work ok, except that the DroboCopy function doesn't work at all. This is the backup solution, which I can configure, and if I launch it (e.g. to back up from the old NAS to the Drobo) it spins the NAS, seeking the drive all over hell and creation, until finally giving up an hour+ later with zero files copied. Selecting only a subset of the data yields the same effect albeit more quickly. On my Mac I installed the Dashboard software too, since most of my fiddling with the device will be from my couch in the living room. Finder connects to the box just fine, fwiw, but Dashboard just sits there, "waiting for connection." This is considerably more bothersome than the above paragraph, but I figured I'd give whatever information I have. Drobo is insisting that I send them this "Debug Log" file that their software generates. Does anyone know what's in it? It's encrypted and they won't tell me, which spooks me just a bit; not like I'm terribly concerned about privacy but I don't want to be sending personal information out to every clown who says they "need" it in order to help me. thanks a ton, -tom!

    Read the article

  • File transfer from MP3 player to computer

    - by JP
    I own an old 20GB Creative Zen jukebox (all external screws are gone on it LOL) and I would like to transfer files back to my PC to get them on my new iPod. Problem is, no matter what software I use (WinAMP, Creative Media Source or Windows Media Player), it just stops transferring files on my HD with an error message that says there is no more space on the destination folder. Problem is, there is still 320GB free. I tried lot of things like installing newer driver, latest Zen plug-in for Media Source, latest WinAMP version. Sometimes, it just works and then again, it stops working and I get this non-sense error. Restarting my PC sometime solves the issue by giving me enough time to transfer 10 or 15 more files and then I get the error again and again. Yesterday though I managed to transfer up to 3GB of MP3s on my computer before getting the error. Seems like I'm having a driver issue or a weird behavior from the player and/or the software I'm using. 3 different software can't reproduce the exact same issue by themselves so it must be something related to the driver. I can't find any post of any sort concerning such issue on old forums. Any idea?

    Read the article

  • Editing a windows XP installation's registry without being able to log in.

    - by Alain
    I've got a windows XP installation that has a corrupt registry. A worm (which was removed) had hijacked the HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon entry (which should have a value of Userinit=C:\windows\system32\userinit.exe When the worm was removed, the corrupt entry was deleted entirely, and now the system automatically logs off immediately after attempting to log in. Regardless of the user and boot mode, no accounts can be logged in to. The only thing required to correct this behavior is to restore the registry key, but I cannot come up with any ways of editing the registry without logging in to an account. I tried remotely connecting to the registry but the required services aren't enabled on the machine. I tried booting on the same machine using the BartPE boot CD but I could not find any way of editing the registry on the C:\Windows installation - running regedit only modifies the X:\I386\ registry in memory. So, what can I use modify the registry of an un-login-able Windows XP instance so that I can log in again? Thanks guys. EDIT: The fix worked. The solution to the auto-logoff problem was, as hoped, to simply add the value mentioned above to the appropriate registry entry. This can be done using the BartPE Boot CD, as described in the accepted answer below, but I used the Offline NT Registry Editor software mentioned in another answer. The steps were: Boot from the NT Registry Editor CD Follow the directions until the appropriate boot sector is loaded. Instead of using one of the default options for modifying passwords or user accounts, type "software" to edit that hive. Type '9' to enter the command line based registry editor. Type "cd Microsoft" (enter) "cd Windows NT" (enter) "cd CurrentVersion" (enter) "cd Winlogon" (enter) Type "nv 1 Userinit" to create a new value under the Winlogon key Type "ev Userinit" to edit the new value, and when prompted, type "C:\windows\system32\userinit.exe" (enter) Type 'q' to quit the registry editor, and as you back out of the system, follow directions to write the hive back to disk. Restart your computer and log in - problem solved. (generic 'warning: back up your registry' disclaimer)

    Read the article

  • Running gdb on Ubuntu 9.10 Apache2 Install

    - by AJ
    Hi all, I am trying to run gdb to debug my Ubuntu 9.10 Apache2 install and having a couple of problems: It seems like the package installed by Ubuntu for Apache2 does not include debugging symbols; is there a different version of the package I should be using for developing/debugging? When I try to run gdb, I get an error that looks to be caused by some missing environment variable. Are there additional options I should pass to "run" to get this to work? Here is the output of the debugger session: root@aj-ubuntu:/usr/sbin# gdb apache2 GNU gdb (GDB) 7.0-ubuntu Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/sbin/apache2...(no debugging symbols found)...done. (gdb) run -X Starting program: /usr/sbin/apache2 -X [Thread debugging using libthread_db enabled] apache2: bad user name ${APACHE_RUN_USER} Program exited with code 01. (gdb) Thanks in advance, -aj

    Read the article

  • Convert DVD Movie to MPEG and view on PS3 via Windows Media Server 12

    - by Vidar
    I think Apollo spacecraft missions to the moon were easier than this! I have tried dozens of DVD ripping software and media servers and have had limited success in trying to convert all my DVDs into file format so they can be viewed on PS3. I have also been on dozens of forums and it's all getting a bit confusing, some advice is out of date, some software is no longer updated - updates have been applied to PS3 operating system and windows and so on and so on. There has to be a way to get all this knowledge and information in one place that's up to date so people can do the same thing as me. Can anyone give me some definitive software and/or advice to do the following: I have over 200 DVDs - I want to convert these to VOB files (rename to MPEG so WMS can stream them). Store on hard disk and view via Windows Media Server 12 (Windows 7). I will then be able to view these via my PS3 in my lounge and never have to get out another DVD case again. I don't want to encode to any other format like MP4 with H.264 because I will lose some of the original quality. So MPEG-2 is fine for me. Note: I have been using DVD Shrink but it gives odd results sometimes. The main problem being that once the DVD has been ripped - WMS shows the wrong playing length of the film, however if I use VLC Media Player it will play through the whole film OK. This is obviously no good when it comes to streaming on the PS3.

    Read the article

  • ASUS N56VZ-S4209P Screen saver, Screen dimming,sleep/hibernation mode not working according to power management settings

    - by Alto Roos
    I have a problem with my ASUS N56VZ-S4209P(Win8, I7-3630QM) laptop. If I use the fn+f7 command to turn off the screen it turns on by itself after a few seconds (the time varies between 1-10 seconds). In addition to this my screensaver doesn't activate at all and the laptop doesn't dim its screen after X minutes or goes into sleep/hibernation mode as specified in the power options when plugged in or on battery. As far as my knowledge goes it's not caused by the mouse or track pad at all since I can unplug my mouse and disable the track pad but the problem persist. I presume this is caused by the same problem? Does anyone know of a fix for this problem? It would be greatly appreciated. . . . I seem to have found a solution to the problem related to the screen that turns itself on again. The Power4Gear application has a setting which enables you to turn a "Presentation mode" "On" and "Off", if that setting is "Off" then it doesn't turn the screen on without any human interaction. Thus that part of the problem is fixed.

    Read the article

  • Problem with wireless networking

    - by Rodnower
    Hello, I have atheros wifi hardware, intell chipset, gigabyte laptop and CentOS 5 installed. Now I try to use wireless network and get problems. First of all I want to say that I have 2 OS on my laptop, and when I load Windows XP I still may to access to the wireless network. First I try to get it on Linux was to make active wlan0 interface in: system - administration - network but I get: Determining IP information for wlan0... failed. Second I try also was unsuccessfully: [root 1 network-scripts]# ifup-wireless Error : unrecognised wireless request "off" This relevant output of iwconfig is: Warning: Driver for device wlan0 recommend version 21 of Wireless Extension, but has been compiled with version 20, therefore some driver features may not be available... wlan0 IEEE 802.11 ESSID:"" Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 {output not in the original format} The same things are happen even if I do: modprobe wlan0 (this not get error) Important to say that modprobe not succeed to find ath_pci, tharefor I decide to download latest version of the madwifi driver from http://madwifi-project.org. I extracted this, but when I make this, this is what I get: [root 1 madwifi-0.9.4]# make /bin/sh: line 0: cd: /lib/modules/2.6.18-164.el5/build: No such file or directory Makefile.inc:66: * /lib/modules/2.6.18-164.el5/build is missing, please set KERNELPATH. Stop. I tried to set KERNELPATH, but I think that it was incorrect: [root 1 madwifi-0.9.4]# make KERNELPATH=/lib/modules/2.6.18-164.el5/kernel/ /bin/sh: cc: command not found Makefile.inc:81: * Cannot detect kernel version - please check compiler and KERNELPATH. Stop. Some one have any ideas? Thank you very much for ahead.

    Read the article

  • Restoring snapshot for Microsoft Exchange server

    - by Mugen
    Hi, The background: I need to do some testing with Microsoft exchange server. Specifically, I'll be installing some software on the Microsoft exchange server machine and uninstalling that same software again. The problem I face: While I repeatedly do this with different versions of my software there is a chance that sometime later the Exchange server installation might get corrupted. When that happens I would need to reinstall Exchange server which I feel is somewhat of a chore. So what I am planning to do is to install the Ms Exchange server on a virtual machine in VMware ESX server and take a snapshot so that during my work whenever the installation is corrupted I can restore the snapshot. So here's my question: Would restoring the snapshot for the Microsoft Exchange server virtual machine work correctly? I'm not familiar with the intricacies of exchange server and any changes (if any) that happen with the Domain controller when we use or install an exchange server (Personally I don't think that should happen but just making sure). I have a shortage of time and hence decided to post this question here. Could someone please tell me whether restoring a snapshot for Exchange server would work fine? Thanks a load, Mugen

    Read the article

  • Laptop GPU apparently blew up, motherboard doesn't even turn on its power LED. [But..]

    - by leladax
    EDIT: (Was: Laptop automatic shutdown after 2 seconds) If I take out the GPU, the motherboard LED turns on but then [if it attempts to power up and boot] it turns off after 2 seconds [fans turn on normally in that short period]. [Without the GPUs out there's not even an attempt to boot.] It's an SLI motherboard for a toshiba (model X200-219). If I take out one of the GPUs (they are on top of each other) it surprisingly lets the motherboard turn on too (as it is if both are out) but it still turns off after 2-3 seconds, same behavior. I wonder if it's the GPU that produces the 'turn off after being on' behavior and not something else. [Has anyone seen this behavior with blown up GPUs or could it be something else?] Previous question (before EDIT. Sorry, but someone thought it productive to lock the other one as duplicate): I'm trying to insvestigate which component produces this behavior. Other indications show it may be the GPU but I wonder if anyone knows more. It's a Toshiba Satellite X200 description: AC power shows the power being fed normally, when turned on the fan works and it appears to be starting up but after 2 seconds it shuts down with only the 'AC power connected" led on. -- seconds are about up to 4,maybe not 2 exactly.

    Read the article

  • Hard drive failed, suspected filesystem corruption, still cannot salvage any data from harddrive

    - by Hippy-Head
    Firstly, I am terribly sorry if this is a duplicate, but I couldn't find a similar issue to mine, so here goes. I have a 1TB hdd bought around 8 months ago used as backup hard drive. I have not used the drive for a period of time whatsoever, and when I was trying to get back to some files on it, it was completely wiped just like that. At first it would not boot I tried everything from command line chkdsk and filesystem recovery software to rebuilt it. After a few attempts I managed to initialize it, at that time it was an achievement. The problems started when I tried to recover the data inside, I have used A LOT of software free and commercial software on both Mac and Windows, with the help of cmd or Terminal commands, however no data of any kind was recovered, even after leaving it thoroughly scan for around 9-10 hours all night sometimes longer, with no results at all. I am somewhat desperate, I am usually good at retrieving data from corrupt hard drives, but this is not the case. Call me paranoid, but I do not want to give it to someone to fix it for me, as I have a lot of photos and personal stuff that I do not want anyone to see.

    Read the article

  • Cheapest iSCSI SAN for Windows 2008/SQL Server clustering?

    - by MichaelGG
    Are there any production-quality iSCSI SANs suitable for use with Windows Server 2008/SQL Server for failover clustering? So far, I've only seen Dell's MD3000i, and HP's MSA 2000 (2012i), which both are around $6K with a minimal disk configuration. Buffalo (yea, I know), has a $1000 device with iSCSI support, but they say it will not work for 2008 failover clustering. I'm interested in seeing something suitable for failover in a production environment, but with very low IO requirements. (Clustering, say, a 30GB DB.) As for using software: On Windows, StarWind seems to have a great solution. But it's actually more money than buying a hardware SAN. (As I understand, only the enterprise edition supports having replicas, and that's $3000 a license.) I was thinking I could use Linux, something like DRBD + an iSCSI target would be fine. However, I haven't seen any free or low-cost iSCSI software that supports SCSI-3 persistent reservations, which Windows 2008 needs for failover clustering. I know $6K isn't much at all, just curious to see if there are practical cheaper solutions out there. And finally, yes, the software is expensive, but many small business get MS BizSpark, so the Windows 2008 Enterprise / SQL 2008 licenses are completely free.

    Read the article

  • Can't find created directory on zfs

    - by maniat1k
    I'm using openSUSE 13.1. I created a new directory on a zpool zfs create zpgd0/iSCSI -o compression=lz4 -o atime=off but I'm not looking on that... So I do it again but I'm getting... zfs create zpgd0/iSCSI -o compression=lz4 -o atime=off cannot create 'zpgd0/iSCSI': dataset already exists adding some data zpool history History for 'zpgd0': 2014-08-11.13:38:21 zpool create -f zpgd0 raidz2 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0490461 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0603473 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0606817 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0670246 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0673599 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0715212 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0722699 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0731193 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0732862 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0806663 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0807385 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0816943 2014-08-11.14:13:09 zpool set autoexpand=on zpgd0 2014-08-11.14:14:32 zfs create zpgd0/espacio 2014-08-19.11:47:47 zfs create zpgd0/iSCSI -o compression=lz4 -o atime=off zpool status -v pool: zpgd0 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zpgd0 ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0490461 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0603473 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0606817 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0670246 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0673599 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0715212 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0722699 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0731193 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0732862 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0806663 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0807385 ONLINE 0 0 0 scsi-SATA_WDC_WD4001FAEX-0_WD-WMC1F0816943 ONLINE 0 0 0 errors: No known data errors I have no errors but the folder does not appear, so what Can I do? sorry add it zfs list NAME USED AVAIL REFER MOUNTPOINT zpgd0 933K 35,5T 54,7K /zpgd0 zpgd0/iSCSI 54,7K 35,5T 54,7K /zpgd0/iSCSI

    Read the article

  • iBook G4 has black screen on boot

    - by Jonathan Patt
    I have an old iBook G4 (A1054, 1.2 GHz) which has issues when it loses power or is shut off. If the battery drains—which happens quickly, as its remaining capacity is very low—it enters some sort of weird mode where it's not really awake (the screen is black, can't do anything) but it has no pulsing light indicating it's asleep either. The only way to exit this mode is to hold down the power button for ten seconds until it shuts off, and attempt rebooting it. Almost always, however, it makes the sound of the optical drive starting up, and then doesn't continue past that point. The screen doesn't come on, and things like resetting PRAM don't work. Occasionally a fan comes on loudly for a second or two. This sometimes seems to correspond with my pressing down on the rear-right casing, above the power jack. In the past, shutting it off, disconnecting it from power, removing the battery and waiting for 30 minutes would do the trick, but this time I have done that several times, letting it sit for up to several hours before retrying, to no avail. Any ideas?

    Read the article

  • WTH? Upgrading Ubuntu 9.10 to 10.04 Problem: No Internet Connection?

    - by damx
    Earlier today I tried upgrading my Ubuntu 9.10 Karmic Kaola from the update manager. (FYI: all 9.10 updates were applied prior to this) Everything was going well downloading until I got an error dialog informing me that some software packages weren't downloaded because of an Internet connection. Would say it was halfway thru. Anyway, Was told that the software packages that it did download, however, would kept and I figure it's not a big deal. Just run it again. But first ran Firefox to verify my connection as I haven't had any connection problems. But my internet connection was/is fine as evident by this posting. With that cleared, I ran the update manager again, clicked on "Upgrade" and this time I received "Could not download the release notes. Please check your internet connection" huh? This is my first time dealing w/ Ubuntu and my first upgrade so I am hoping someone can help. Not sure what the problem can be. I am can surf the web w/ no problems. Please help. PS: There was no installing at any point. Just downloading. PSS: The software it managed to download the first time around is now visible in the update manager but don't think I should install as I see in the compiz description it's for v1:0.8-4-0ubuntu2 I figure it's designed for 10.04 and might ruin things further if I install

    Read the article

  • Upgrading Ubuntu 9.10 to 10.04 Problem: No Internet Connection?

    - by damx
    Earlier today I tried upgrading my Ubuntu 9.10 Karmic Kaola from the update manager. (FYI: all 9.10 updates were applied prior to this) Everything was going well downloading until I got an error dialog informing me that some software packages weren't downloaded because of an Internet connection. Would say it was halfway thru. Anyway, Was told that the software packages that it did download, however, would kept and I figure it's not a big deal. Just run it again. But first ran Firefox to verify my connection as I haven't had any connection problems. But my internet connection was/is fine as evident by this posting. With that cleared, I ran the update manager again, clicked on "Upgrade" and this time I received "Could not download the release notes. Please check your internet connection" This is my first time dealing with Ubuntu and my first upgrade so I am hoping someone can help. Not sure what the problem can be. I can surf the web with no problems. PS: There was no installing at any point. Just downloading. PSS: The software it managed to download the first time around is now visible in the update manager but don't think I should install as I see in the compiz description it's for v1:0.8-4-0ubuntu2 I figure it's designed for 10.04 and might ruin things further if I install.

    Read the article

  • Downmix ALL SYSTEM audio to mono - Windows 7

    - by Mike K.
    I'm deaf in one ear and want to use my headphones when playing a game and talking with my friends on Skype/TS/Mumble/etc while also sometimes listening to music. I need ALL my system audio to be downmixed to mono so that my ONE hearing ear gets ALL audio channels instead of split stereo audio. No, none of the other similar questions on superuser have a solution. My headphone properties does not have a 'Mono' option, I don't have a 'Headphone Virtualization' option, and my Realtek HD audio driver software doesn't have these options either (driver was updated 11/14/2012). Don't even talk about setting the balance of one side of the headphones to 0. You're not paying attention if you suggest that. JACK and Virtual Audio Cable didn't work. It's possible I configured them wrong, but I followed the steps I found in related questions and still got split stereo out. TL;DR I need a viable, working, software solution (I say software because I have a USB headset) for forcing ALL system audio to mono so that I can hear literally everything through the one earpiece. Thanks!

    Read the article

  • What breaks in a Windows domain if a member has a high time skew?

    - by Ryan Ries
    It's taken for granted by most IT people that in a Windows domain, if a member server's clock is off by more than 5 minutes (or however many minutes you've configured it for) from that of its domain controller - logons and authentications will fail. But that is not necessarily true. At least not for all authentication processes on all versions of Windows. For instance, I can set my time on my Windows 7 client to be skewed all to heck - logoff/logon still works fine. What happens is that my client sends an AS_REQ (with his time stamp) to the domain controller, and the DC responds with KRB_AP_ERR_SKEW. But the magic is that when the DC responds with the aforementioned Kerberos error, the DC also includes his time stamp, which the client in turn uses to adjust his own time and resubmits the AS_REQ, which is then approved. This behavior is not considered a security threat because encryption and secrets are still being used in the communication. This is also not just a Microsoft thing. RFC 4430 describes this behavior. So my question is does anyone know when this changed? And why is it that other things fail? For instance, Office Communicator kicks me off if my clock starts drifting too far out. I really wish to have more detail on this. edit: Here's the bit from RFC 4430 that I'm talking about: If the server clock and the client clock are off by more than the policy-determined clock skew limit (usually 5 minutes), the server MUST return a KRB_AP_ERR_SKEW. The optional client's time in the KRB-ERROR SHOULD be filled out. If the server protects the error by adding the Cksum field and returning the correct client's time, the client SHOULD compute the difference (in seconds) between the two clocks based upon the client and server time contained in the KRB-ERROR message. The client SHOULD store this clock difference and use it to adjust its clock in subsequent messages. If the error is not protected, the client MUST NOT use the difference to adjust subsequent messages, because doing so would allow an attacker to construct authenticators that can be used to mount replay attacks.

    Read the article

  • Overclock Failed

    - by John
    This morning when I tried to turn on my computer, the monitor would not display anything. The computer is on, but no UI on the monitor and no beep. I turned off the computer and turn it back on again. This time, the computer was on for about 2 seconds and automatically turned itself off for about 2 second and automatically turned itself back on. This happened two times without the monitor displaying any UI. On the third try, the computer did the same thing but when it turned itself back on, the monitor displayed this: American Megatrends Asus P8P67 Le ACPI bios Revision 1011 CPU Intel Core i5 2500K CPU @ 3.30GHz Speed: 3300MHz Total Memory 4096 MB (DDR3-1333) USB Devices Total: 0 Drive, 1 Keyboard, 1 Mouse, 2 Hubs Detected ATA/ATAPI Deivces SATA6G_2 Hitachi HDs821010CLA 332 SATA3G_1 Corsair force 3 SSD SATA3G_2 HL-DT-ST DB-RE UH12CS28 Overclocking Failed! Please enter setup to reconfigure your system. Press F1 to Run Setup. After I pressed F1, it went into the Asus EF1 Bios Utility. I couldn't do anything in there so I just exited. After which, the computer auto turned off and on again and I was able to use the PC like regular. This has never happened to this computer before and the day before, nothing seemed wrong, just regular use and some gaming.

    Read the article

  • HP Officejet 4500 G510n-z Not Showing up in Remote Desktop (Terminal Services)

    - by Greg_the_Ant
    I installed this printer on a windows XP machine. First using the wireless option, and later using USB. In both cases when I connect to my other computer (also Windows XP) via terminal services and check printers in the local resources tab it does not show up on the remote session. I used to have a Samsung connected to my local computer over USB and and that worked fine over terminal services. Things I tried so far: I did read this page and installed the software fix on both computers: (Printers that use ports that do not begin with...) I installed the minimum HP software install on the remote computer and that didn't help either. I also tried running the add new printer wizard on the remote computer: I selected "local printer attached to this computer" and did not check the "automatically.." option. On the next page of the wizard I can select an option for "use the following port". I see options for TS001 through TS009 there. I'm assuming those are coming from the local machine. I tried clicking each one and then checking "have disk" and pointing it to C:\3be8dc611b11322e8ddf8a67\i386\msxpsdrv.inf 1 but for every single TS00.. port it says "The specified location does not contain information about your hardware." Any help would be greatly appreciated. I'm pretty stuck at this point. 1 C:\3be8dc611b11322e8ddf8a67 is the folder I extracted the HP driver software to after I downloaded it.

    Read the article

  • Group Policy installation failed error 1274

    - by David Thomas Garcia
    I'm trying to deploy an MSI via the Group Policy in Active Directory. But these are the errors I'm getting in the System event log after logging in: The assignment of application XStandard from policy install failed. The error was : %%1274 The removal of the assignment of application XStandard from policy install failed. The error was : %%2 Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was : %%1274 The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance. When I reboot and log in again I simply get the same messages about needing to perform the update before the next logon. I'm on a Windows Vista 32-bit laptop. I'm rather new to deploying via group policy so what other information would be helpful in determining the issue? I tried a different MSI with the same results. I'm able to install the MSI using the command line and msiexec when logged into the computer, so I know the MSI is working ok at least.

    Read the article

  • 502: proxy: pass request body failed

    - by Andrei Serdeliuc
    Sometimes I get the following error (in apache's error.log) when viewing my site over https: (502)Unknown error 502: proxy: pass request body failed to xxx.xxx.xxx.xxx:443 I'm not entirely sure what this is and why it happens, it's also not consistent. The request route is: Browser Proxy server (apache with mod_proxy + mod_ssl) Load balancer (aws) Web server (apache with mod_ssl) The configuration on the proxy server is as follows: <VirtualHost *:443> ProxyRequests Off ProxyVia On ServerName www.xxx.co.uk ServerAlias xxx.co.uk <Directory proxy:*> Order deny,allow Allow from all </Directory> <Proxy *> AddDefaultCharset off Order deny,allow Allow from all </Proxy> ProxyPass / balancer://cluster:443/ lbmethod=byrequests ProxyPassReverse / balancer://cluster:443/ ProxyPreserveHost off SSLProxyEngine On SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /var/www/vhosts/xxx/ssl/www.xxx.co.uk.cert SSLCertificateKeyFile /var/www/vhosts/xxx/ssl/www.xxx.co.uk.key <Proxy balancer://cluster> BalancerMember https://xxx.eu-west-1.elb.amazonaws.com </Proxy> </VirtualHost> Any idea what the issue might be?

    Read the article

  • Why is Mac supposedly better than Windows for graphics?

    - by Svish
    Ok, people just keep telling me that if you're going to be working with graphics and design and stuff, you should get a Mac. And I just don't get the logic. Because most of these people would be working with Adobe software, which are for both Windows and Mac. To me it seems like their whole argument is based on that "everyone else does". Like, Mac had some graphics software that Windows didn't earlier in history, so most people were using Mac. And since most people were using Mac, new people also started using Mac. And since most people were using Mac, schools and universities used Mac. Which taught new people to use Mac. So they were using Mac. And told everyone they met that everyone they knew were using Mac. And so on. Anyways... What is the deal really? Is there actually any advantage in using Mac for graphics and design and such things? My take is that you pretty much have the same software and both Mac and Windows are powerful enough, support enough RAM, are stable (as long as you don't install lot's of junk or faulty drivers), et cetera. So, can anyone give me a good explanation on this? Is there a real difference or are people just brainwashed?

    Read the article

  • Why does this batch script terminate unexpectedly?

    - by neurolysis
    This batch script terminates when %CHECKCONTINUE% is given a null value by not inputting anything on line 13 (SET /p CHECKCONTINUE=Okay to continue? (y/n):), why is this? @ECHO OFF SETLOCAL TITLE Registry restore script REM Restores registry settings and disables the cloud SET %CHECKCONTINUE%= :listaction ECHO I'm about to... ECHO 1.) Remove the registry data that specifies settings for TF2 ECHO 2.) Forcibly disable Steam Cloud. ECHO. SET /p CHECKCONTINUE=Okay to continue? (y/n): REM No? IF %CHECKCONTINUE%==n GOTO exit IF %CHECKCONTINUE%==no GOTO exit REM Yes? IF %CHECKCONTINUE%==y GOTO start IF %CHECKCONTINUE%==yes GOTO start REM Did they put something else? IF DEFINED %CHECKCONTINUE% GOTO loop-notvalid REM Did they not put anything at all? IF NOT DEFINED %CHECKCONTINUE% GOTO loop-noreply :start REM Delete application specific data REG DELETE HKEY_CURRENT_USER\Software\Valve\Source\tf\Settings /f REG DELETE HKEY_CURRENT_USER\Software\Valve\Steam\Apps\440 /f REM Disable Steam Cloud for TF2 REG ADD HKEY_CURRENT_USER\Software\Valve\Steam\Apps\440 /v Cloud /t REG_DWORD /d "0x0" /f :exit ENDLOCAL EXIT :loop-notvalid ECHO. ECHO That's not a valid reply. Try again. ECHO. SET %CHECKCONTINUE%= GOTO listaction :loop-noreply ECHO. ECHO You must enter a reply. ECHO. SET %CHECKCONTINUE%= GOTO listaction

    Read the article

  • Datacenter IP Addressing and DNS Management

    - by user65248
    Hello everyone Basically we are setting up a small Datacenter, about 300 amps power and max 50 racks, Im saying these coz I wanna u imagine the size and requirements, I have studied networking mostly Microsoft and Windows based systems , but I cant get how the IP addressing and DNS management and configuration works in a Datacenter , and unfortunately I have to setup everything by myself but defe we will have some staff to do some job. Now my questions Datacenter IP Addressing Suppose we have got a block of 200 IP addresses from our ISP, How can I manage these block of IP addresses, is there any software out there to simplify this I heard that using DHCP server in a datacenter is not recommended, otherwise what would u say about MS DHCL server ofc considering we need to have backup serversin case of failur How can I assign a block of IPs to a specific rack, I know with different software and management its different but Im asking how it is done normally IP addresses are exposed to the whole network, what if a customer try to use an IP address and is not assigned to their server or rack , how can I prevent this or how can I track the IP usage DNS Management Im goin to setup at least two servers for our DNS servers, I know nothing about Datacenter DNS system, but I have configured DNS server in normal networks and also for webservers, Now I wanna know What exactly needs to be done for a DNS in a datacenter that is not done for normal networks. How can I configure PTR records why cant I configure PTR records on my webserver side DNS server and it should be done on datacenter DNS server , I mean what is the difference in DC DNS servers that allow us to to so , I know the question is very silly and simple but Im confused Is there any software outthere to allow doing the whole thing, I mean automatically add records to the DNS and also managin IP addresses !? Thanks in advance

    Read the article

  • InstallShield or Windows installer corrupted

    - by Bobby S
    Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

    Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >