Search Results

Search found 11111 results on 445 pages for 'fahnz mode'.

Page 339/445 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

• BackupExec 12 + RALUS - VERY slow backups

  - by LVDave

  We use Backup Exec 12 and the Remote Agent for Linux/Unix Servers (RALUS) to backup a large RHEL5 system. For various reasons we need to do a daily working set job. These working-set jobs run abysmally slow. The link between the target machine and the BE server is gigabit, and any other type of job runs 1-3GB/min. These working-set jobs start out at perhaps 40MB/min and over the course of the backup job slowly drops down so low that the BE job rate display in the "current jobs" goes blank.. Since we usually are only doing changed-files for one day, the job is usually small and finishes overnight and we don't worry abotu the slowness, but we had some issues with the backup server, and missed about 6 days of fairly heavy work on the Linux box, so this working-set job will be a doozy.. We have support with Symantec, and I've pestered them a lot about this, they've had me run RALUS in debug mode, sent them that log and a VXgather from the BE host and they had no fix/workaround.. To give an idea, I have the mentioned working-set job running for the last 3 1/2 hours and it's backed up just under 10MEGAbytes.... I'm posting this here to see if anybody in the "real world" has seen this/and/or has any ideas what might be causing these abysmally slow jobs, since Symantec seems to be clueless...

  Read the article

• Sharing files between 2 different routers

  - by Chris

  I realize this has been asked before and I have read as much as I could find on the topic but I still need help with this because there are so many different approaches and the ones I am trying aren't working. So I have 2 routers, lets call them A and B. Both have a wireless feature and are active. A is in the basement and receives the internet. There is a TV on the ground floor that is connected to A through an ethernet wire. B is upstairs and gets the internet from A through an ethernet wire. Connected to B, is a desktop running Plex Media Server. What I want to do is make sure devices connected to both routes can access the Plex Media Server. So what I have read is that I should plug in the ethernet wire connecting B to a into a LAN port instead of the WAN port. After that I should turn off DHCP. I have tried this and B stops receiving internet. What am I doing wrong? Another thing I have read is to use Router B in bridge mode but Router B is running openwrt and I have QoS on it so gaming/VoIP/browsing is unaffected by heavy downloading/uploading. I would prefer to keep this active. I realize it might be ineffective if a device in Router A is doing some hardcore downloading but all that stuff is done on Router B anyway so it doesn't matter. Router A can't get openwrt because it is a shitty one provided by Bell. So, how do I proceed with this?

  Read the article

• Regular Windows 7 BSOD with Shrew VPN client

  - by Junto

  The Shrew VPN client appears to be a good alternative to the Cisco VPN Client on x64 Windows 7. However, since installing it I've seen fairly regular BSODs. Minidump attached: Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [D:\Temp\020810-23431-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16385.amd64fre.win7_rtm.090713-1255 Machine Name: Kernel base = 0xfffff800`0285f000 PsLoadedModuleList = 0xfffff800`02a9ce50 Debug session time: Mon Feb 8 18:08:12.887 2010 (GMT+1) System Uptime: 0 days 7:52:06.120 Loading Kernel Symbols ............................................................... ................................................................ .............. Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {0, 2, 0, fffff800028d50b6} Unable to load image \SystemRoot\system32\DRIVERS\vfilter.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for vfilter.sys *** ERROR: Module load completed but symbols could not be loaded for vfilter.sys Probably caused by : vfilter.sys ( vfilter+29a6 ) Followup: MachineOwner Machine is a brand spanking new Dell Precision T5500. Superuser appears to have several recommendations for the Shrew VPN Client as an alternative to the Cisco VPN client on 64 bit machines, so I wondered if anyone here has seen this problem and possibly found a solution to the problem? I've decided to run the VPN client under Windows 7 compatibility mode for the moment (Vista SP2) with administrator privileges to see if it makes a difference. Oddly, the VPN doesn't necessarily need to be connected. I've noticed it when browsing using Google Chrome and Internet Explorer, usually when I open up a new tab. If it carries on I think I'll be forced to shell out the 120 EUR for the NCP Client instead.

  Read the article

• VirtualBox problems writing to shared folders (Guest Additions installed)

  - by vincent

  I am trying to setup a shared folder from the host (ubuntu 10.10) to mount on a virtualized CentOS 5.5 with Guest Additions (4.0.0) installed (Guest addition features are working ie. seamless mode etc.). I am able to successfully mount the share with: mount -t vboxsf -o rw,exec,uid=48,gid=48 sf_html /var/www/html/ (uid and guid belong to the apache user/group) the only problem is that once mounted and I try to write/create directories and files I get the following: mkdir: cannot create directory `/var/www/html/test': Protocol error I am using the proprietary version of VirtualBox version 4.0.0 r69151. Has anyone had the same problem and been able to fix it or has any idea how to potentially fix this? Another question, the reason for setting this up is this. Our production servers are on CentOS 5.5 however I am a great fan of Ubuntu and would like to develop on Ubuntu rather than CentOS. However in order to stay as close to the production environment I would like to virtualize CentOS to use a web server and use the shared folder as web root. Anyone know whether this isn't a good idea? Has anyone successfully been able to set this up? Thanks guys, your help is always much appreciated and if you need any more information please let me know.

  Read the article

• Command prompt hangs/freezes/crashes sporadically

  - by Leonard Challis

  I'm finding it very difficult to Google this, I don't seem to be able to find anyone with the same issue and I don't know enough about the Windows operating system to troubleshoot. The machine(s) we are seeing the problem on are Windows 7 (professional) both 64bit and 32bit. The problem is with the command prompt freezing up, seemingly randomly. When it does freeze nothing will bring it back to life (i.e. keypress) and it's nothing to do with Quick Insert mode either. It doesn't seem to be when I run standard commands, such as cd, dir, etc, but when I run different programs from the command line. The annoying thing is that sometimes the prompt will freeze and at other times it won't, using the same program/command in the prompt. To add to the frustration, one of my colleagues who had the same problem seems to not have experienced it for a few days now (we're pretty heavy on the command line). It's not a VPN/RDP thing as suggested in other questions and forum posts, as I've seen this both locally and remotely. I thought it was to do with the return code signifying an error or some error state in the program, i.e.: C:\Users\leonardc>mysql -u lalala ERROR 1045 (28000): Access denied for user 'lalala'@'localhost' (using password: NO) but this isn't always the case either. In fact the above command hasn't crashed the shell before. Elevating the prompt to run as Administrator doesn't seem to have any bearing on the problem either. Disabling my anti-virus doesn't have an effect either. Update: I tried the same commands in PowerShell, but I still get the same problem, it will freeze at random times (more often than not, as with the command prompt, but not always). It's not the same as command prompt in the fact that one might work while the other doesn't, but then the next time I try run the same command in both it will suddenly be different again.

  Read the article

• How to run the CPU at something like 75%?

  - by Tobias Kienzler

  My notebook is too old for me to invest into a new fan (it will simply be replaced by a new one when the final heat death occurs), but when it runs on full speed I feel like sitting in front of a vacuum cleaner with integrated cooking... I'm currently using NHC, the Max Battery mode of which let's the CPU run at 50% (~800 MHz). That's fine for most applications, and both temperature and noise remain low. However, on some occasions I need a bit more speed, more around 75% maybe. Can I set the power saving settings somehow so that the CPU won't surpass 75% of it's capability so that an acceptable compromise between power and noise is achieved? I can't set the CPU frequency in the BIOS and since on rare occasions I'd like to be able to switch to 100% without much hassling, hardware solutions like setting jumpers are no option. This answer to a similar (linux!) question mentions NHC should be able to offer these options, but for me they are all greyed out: The notebook is an Asus Z9200K, I guess NHC doesn't support its chipset enough for these advanced options.

  Read the article

• Long access time for static web page on virtual machine

  - by Karol

  My setup Windows 7 on workstation that I use at work (with domain) and home (no domain) Virtual machine (VMWare) that runs Arch Linux (I will call it just "Linux") with network interface in bridged mode. Linux serves web pages with Nginx. IP address of Linux machine is 192.168.0.16 and is added to C:\windows\system32\drivers\etc\hosts: 192.168.0.16 bridged bri IP address of Windows workstation is added to /etc/hosts: 192.168.0.10 workstation I can add more details to my setup description (I am not sure what is relevant). The question Often (but not always) it takes long time for a web browser (Firefox) to open static web page served by Linux. I am sure it is not a performance issue. To be more specific: it takes about ~20 seconds to resolve(?) the address http://bridged for a web browser. Additionally I have just installed samba service and noticed similar problem, so it is not specific to browser & http. Initial access for samba shares also takes long time.

  Read the article

• Problems mounting HPUX LVM+VXFS filesystem on Linux

  - by golimar

  I have a physical disk from a HPUX system that I need to access from a Debian Linux for ia64 system. From the hpux-lvm-tools project I have the tools to access the HPUX LVMs (Linux LVM has a different format) and I also have the freevxfs driver. I know beforehand that the disk has three partitions, and that the biggest one contains LVM volumes, and some of those are VxFS filesystems. I can see the partitions: # cat /proc/partitions major minor #blocks name 8 32 143374744 sdc 8 33 512000 sdc1 8 34 142452736 sdc2 8 35 409600 sdc3 It finds a VG in one of the disk partitions: # ./vgscan_hpux On /dev/sdc2 - vg1328874723 # ./pvdisplay_hpux /dev/sdc2 PV General Information ---------------------- VG Creation Time Fri Feb 10 12:52:03 2012 Physical Volume ID 1766760336 1328874723 Volume Group ID 1766760336 1328874723 Physical Volumes in VG 1766760336 1328874723 VG Actication Mode 0 - LOCAL PE Size 64 MBs Lvol sizes ---------- lvol1 - 8 Extents - 512 MBs lvol2 - 192 Extents - 12288 MBs lvol3 - 16 Extents - 1024 MBs ... lvol21 - 13 Extents - 832 MBs lvol22 - 224 Extents - 14336 MBs lvol23 - 16 Extents - 1024 MBs Then I activate that VG and some new devices appear in my system: # ./pvactivate_hpux /dev/sdc2 VG vg1328874723 Activated succesfully with 23 lvols. # # ll /dev/mapper/ total 0 crw------- 1 root root 10, 59 Nov 26 16:08 control lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol1 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol10 -> ../dm-9 ... lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol9 -> ../dm-8 But: # mount /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: you must specify the filesystem type # mount -t vxfs /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1328874723-lvol18, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # lsmod |grep vxfs freevxfs 23905 0 I also tried to identify the raw data with the file command and it just says 'data': # file -s /dev/mapper/vg1328874723-lvol18 /dev/mapper/vg1328874723-lvol18: symbolic link to `../dm-17' # file -s /dev/dm-17 /dev/dm-17: data # Any clues?

  Read the article

• Cannot connect to FTP sites anymore

  - by Wayne M

  I have the FTP service running on Server 2003, and I am hosting websites through Apache. I have users configured to point to certain directories on the server. I am using FileZilla to remote FTP, but it never seems to connect to the directory. The command window says: Command: USER wayne Response: 331 Password required for wayne Command: PASS: ***** Response: 230 User wayne logged in Status: Connected Status: Retrieving directory isting... Command: PWD Response: 257 "/wayne" is current directory Command: TYPE I Response: 200 Type set to I. Command: PASV And that's it. It doesn't display any directories at all, and the pane says "Not connected to any server". Sometimes it will display the folder, but nothing happens when I click on it to expand it. It was working fine, and I have another FTP server set up the same way that does work. How can I fix this? EDIT: I've tried changing it to Active FTP, and it says: Command: LIST Command: 150 Opening BINARY mode data connection for /bin/ls Response: 425 Can't open data connection. Error: Failed to retrieve directory listing. I also noticed that I'm not able to browse the site in IIS's management console anymore, it just shows a blank screen when I click on one of the names and says There are no items to show in this view, although the name has permissions to view the folder and everything. Could it be because I have the Web Publishing service disabled (as I'm not using IIS to host websites)? That shouldn't cause anything should it?

  Read the article

• Issue with SSL using HAProxy and Nginx

  - by Ben Chiappetta

  I'm building a highly available site using a multiple HAProxy load balancers, Nginx web serves, and MySQL servers. The site needs to be able to survive load balancer or web servers nodes going offline without any interruption of service to visitors. Currently, I have two boxes running HAProxy sharing a virtual IP using keepalived, which forward to two web servers running Nginx, which then tie into two MySQL boxes using MySQL replication and sharing a virtual IP using heartbeat. Everything is working correctly except for SSL traffic over HAProxy. I'm running version 1.5 dev12 with openssl support compiled in. When I try to navigate to the virtual IP for haproxy over https, I get the message: The plain HTTP request was sent to HTTPS port. Here's my haproxy.cfg so far, which was mainly assembled from other posts: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice # log 127.0.0.1 local0 user haproxy group haproxy daemon maxconn 20000 defaults log global option dontlognull balance leastconn clitimeout 60000 srvtimeout 60000 contimeout 5000 retries 3 option redispatch listen front bind :80 bind :443 ssl crt /etc/pki/tls/certs/cert.pem mode http option http-server-close option forwardfor reqadd X-Forwarded-Proto:\ https if { is_ssl } reqadd X-Proto:\ SSL if { is_ssl } server web01 192.168.25.34 check inter 1s server web02 192.168.25.32 check inter 1s stats enable stats uri /stats stats realm HAProxy\ Statistics stats auth admin:********* Any idea why SSL traffic isn't being passed correctly? Also, any other changes you would recommend? I still need to configure logging, so don't worry about that section. Thanks in advance your help.

  Read the article

• How to use different scaling for every monitor?

  - by Mikael Koskinen

  One of the new features in Windows 8.1 is the new "Desktop display scaling", which allows user to configure scaling per monitor. I've been trying to get this working in preview but with no success. If I configure the scaling, it always affects all of my monitors. I have two monitors, the main one with a higher resolution and the secondary with "normal" resolution. The secondary monitor is used in portrait mode. I would like to configure the main monitor's scaling as the text is currently too small. Here's how things look at the configuration screen by default: Now if I adjust the scaling, click apply and do relogin, everything is bigger. On both of my monitors. I haven't clicked the "Let me choose one scaling level for all my displays", but still the slider seems to affect both of them. If I check the "Let me choose one scaling level", the UI changes to look similar to what we have in Windows 8: Still the problem persists. The scaling is applied to both of my monitors. So, it doesn't matter if I check the box or not, the scaling is always applied to all the displays. Any idea how I could get this to work in preview? I've read some comments which seem to indicate that this should work in preview, though Paul Thurrott mentioned at his Winsupersite article that he either didn't get this to work.

  Read the article

• Prevent Win7 from resuming from hibernation

  - by Tigraine

  Hi Guys, I am running Win7 x64 on my machine and everything is perfect. I actually never turn off my PC completely but rather I always put it into hibernation mode for fast resume once I get back. Hibernation works like a charm, but once every 50 or 100 hibernations something goes wrong and the machine reboots. After that I usually have to reset the system clock in BIOS and Windows is starting up from the hibernation image that somehow got saved to disk (that's really cool). But: This hibernation image recovery is awfully slow, once the machine is up again it takes almost 2 minutes for it to not feel sluggish any more (I suspect this is due to pagefaults on all memory access). I'm looking for a way to tell Windows to NOT recover from the crash but rather just boot fresh, discarding the hibernation since it's faster to just reboot rather than wait for 3+ minutes for the machine to get it's act together. I do see the normal bios startup and also the windows boot afterwards, but hitting F8 like crazy doesn't do anything. In Win2000 and XP a Menu would come up asking me how I do want to boot, but I can't find it on Win7. Thanks in advance!

  Read the article

• bond0 and xen = crash

  - by Rajat

  Bonding with xen 1 - Stop all guests. Reboot dom0 after running "chkconfig xend off" and "chkconfig xendomains off". 2 - Configure bond0 by enslaving eth0 and eth1 to it. I added the below two entries to /etc/modprobe.conf. alias bond0 bonding options bond0 mode=6,miimon=100 Content of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0 IPADDR= NETMASK= ONBOOT=yes BOOTPROTO=static USERCTL=no Did "modprobe bond0" and "service network restart" after that. 3 - Edit /etc/xen/xend-config.sxp Change (network-script network-bridge) To (network-script 'network-bridge netdev=bond0') 4 - Start xend. "service xend start". 5 - chkconfig xend on. 6 - modprode bond0 7 - more /proc/net/bonding/bond0 8 - Create guest images as usual and bridge it to xenbr0. about config i did for my xen kernel rhel 5.3 after i reboot the host server i get in place bond0 get pbond0 and its get disconnect from network only i ping to my vm's on the host server any one have any idea why xen bond0 is acting like that or what is solutions to come out of pbond0 to bond0.

  Read the article

• SFTP ChRoot result in broken pipe

  - by Patrick Pruneau

  I have a website that I want to add some restricted access to a sub-folder. For this, I've decided to use CHROOT with SFTP (I mostly followed this link : http://shapeshed.com/chroot_sftp_users_on_ubuntu_intrepid/) For now, I've created a user (sio2104) and a group (magento).After following the guide, my folder list look like this : -rw-r--r-- 1 root root 27 2012-02-01 14:23 index.html -rw-r--r-- 1 root root 21 2012-02-01 14:24 info.php drwx------ 15 root root 4096 2012-02-25 00:31 magento As you can see, i've chown root:root the folder magento I wanted to jail-in the user and ...everything else by the way. Also in the magento folder, I chown sio2104:magento everything so they can access what they want. Finally, I've added this to sshd_config file : #Subsystem sftp /usr/lib/openssh/sftp-server Subsystem sftp internal-sftp Match Group magento ChrootDirectory /usr/share/nginx/www/magento ForceCommand internal-sftp AllowTCPForwarding no X11Forwarding no PasswordAuthentication yes #UsePAM yes And the result is...well, I can enter my login, password and it's all finished with a "broken pipe" error. $ sftp [email protected] [....some debug....] [email protected]'s password: debug1: Authentication succeeded (password). Authenticated to 10.20.0.50 ([10.20.0.50]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. Write failed: Broken pipe Connection closed Verbose mode gives nothing to help. Anyone have an idea of what I've done wrong? If I try to login with ssh or sftp with my personnal user, everything works fine.

  Read the article

• Photoshop CS6 Corrupted File recovery

  - by Ben Franchuk

  Last night I was working on a client application mock-up in photoshop, but was goin to take a break from my work so I saved the .PSD file on my internal HDD and put my computer into stand-by mode once the file had finished saving. Unfortunately my computer crashed while it was entering stand-by and shut itself down (photoshop was still open). I did not boot it again to make sure all my files were ok because they had already been saved, but today once I opened up the file again it was extremely corrupted and also completely un-editable (screenshot bellow). so what im asking is there any way to recover my work, or at least some of it? i have put in a good few days work on this project and would hate to have to restart it. the size of the file is 3070 KB, even though it reads as 712 KB in photoshop. i dont know if these file sizes are larger or either smaller than the original non-corrupted file's size, but considering all the layers in the file i suspect it was larger before it corrupted. im using windows XP professional 32bit SP3. both my OS and said .PSD file are located on the same internal HDD (74.4 GB). i do have an external HDD (1.5 TB) but i primarily only use it for movies music and tv shows. i dont know if it was plugged in t the time of me editing the document last, though, if it means anything. i have tried many image and PSd recovery softwares but none have returned any results that may help recover my work. edit: i tried using a photo reccovery software (odboso Photorecovery) that actually seems to recover the corrupted file in question judging by the size of the file, but i cannot recover it because of the licence fee. knowing that the file is still likely on my HDD, what location might it be located?

  Read the article

• How to deal with the extremely big *.ost files in a Terminal Server environment which is running out of space

  - by Wolfgang Kuehne

  Our Terminal Server is running out of hard disk space, and the major files which occupy most of the space are *.ost files of the Outook, which come form the users which use the Terminal Server all the time through remote desktop. The Outlook is installed on the Terminal Server and various users can use it. What would be a solution in this case. Is there a way to limit the size of the *.ost files? I read in forums that having the Outlook 2010 set up in Cached Exchange Mode isn't the best practice for an environment where the hdd space is a major constraint. First thing that came to my mind is using folder redirection, and place the ost files (together with the AppData forlder) in a network share, but this does not help, because the ost files are saved a part of the AppData folder which can not be redirected. Then I thought if it is possible to limit the size of the ost file? Or limit the time that it keeps emailed cached, say just emails from the last 6 months are sufficient. Another solutions that came to my mind, moving the ost files somewhere else, this required the old ost file to be removed, and creation of a new one. I am not quite sure if the new OST file will still have cached the emails which where available in the old ost, or will it start caching from where the other one left. What do you suggest?

  Read the article

• Blinking power button

  - by Mike Ramsey

  A friend asked me to look at his Gateway DX4640 desktop. When he presses the power button, power goes to the mobo (NVIDIA nForce 630i MCP73PV, GeForce 7100 chipset) and the CPU fan starts spinning. The power button slowely blinks on and off (blue) and the screen briefly says no signal and then goes black. And nothing else; no post code beeps. My initial two conjectures were: 1. Vista was stuck in sleep/hibernation mode, or 2. A power off had left the mobo in a bad state. The fix for both is to: a) Unplug the AC power cord b) hold the power button for 30 second to fully discharge the mobo It didn't help. I left the system unplugged from AC power for an hour. No change. I am out of ideas. Has anybody seen anything like this before? What does a blinking blue power button mean? How can I get more data points to guide trouble shooting? --Thank you, --Mike

  Read the article

• Load balancing a Windows File Share using HA-Proxy

  - by NathanE

  After pulling my hair out over DFS I just had this weird and potentially dangerous idea come into my head whereby, just possibly, I might be able to use HA-Proxy to load balance a file share between servers. I've done some remedial packet traces and it does appear that TCP port 445 is the only thing involved in using Windows file sharing. I've always thought for many years that UDP 139, 135 etc were also involved in at least establishing the connection - but apparently not! So I setup a basic test: listen SMBTest *:445 mode tcp server Smb1 172.16.61.201:445 server Smb2 172.16.61.202:445 And you'll never guess what... it works??? (!) Now obviously there is the whole concern about synchronisation between the file servers (of course). That could easily be taken care of with a little bit of Robocopy script. And considering I only need a HA read-only file share there wouldn't be any issues with regard to file locking etc. Can anyone tell me if what I'm playing with here is fire? I really didn't think it would work at all and now I'm a little shocked. What would be the downsides? Could this be relied upon for a production environment?

  Read the article

• VBScript Capture StdOut from ShellExecute

  - by Joe

  I am trying to run the following code snippet as part of a tool to gather and log some pertinent system diagnostics. The purpose of this snippet is to gather the result of running the command: vssadmin list writers The snippet is as follows: ' Set WshShell = CreateObject("WScript.Shell") ' WScript.Echo sCurPath & "\vsswritercheck.bat" ' Set WshShellExec = WshShell.Exec("elevate.cmd cmd.exe /c " & sCurPath & "\vsswritercheck.bat") Set oShell = CreateObject("Shell.Application") oShell.ShellExecute "cmd.exe", sCurPath & "\vsswritercheck.bat", , "runas", 1 vsswriter = VSSWriterCheck Select Case oShell.Status Case WshFinished strOutput = oShell.StdOut.ReadAll Case WshFailed strOutput = oShell.StdErr.ReadAll End Select WScript.Echo strOutPut vsswriter = strOutPut With the first code snippet (commented out) I can run the command and capture stdout from the batch file. In the second code snipped, I cannot capture stdout. I need to be able to run the batch script with Elevated permissions, so I am looking for a compromise between the functionality of the two. I cannot run the entire calling script in elevated mode due to restrictions from other pieces of functionality. I am looking for any ideas on how to add this output to my log as I am running out of options that are within the scope of basic scripts.

  Read the article

• Setfacl configuration issue in Linux

  - by Balualways

  I am configuring a Linux Server with ACL[Access Control Lists]. It is not allowing me to perform setfacl operation on one of the directoriy /xfiles. I am able to perform the setfacl on other directories as /tmp /op/applocal/. I am getting the error as : root@asifdl01devv # setfacl -m user:eqtrd:rw-,user:feedmgr:r--,user::---,group::r--,mask:rw-,other:--- /xfiles/change1/testfile setfacl: /xfiles/change1/testfile: Operation not supported I have defined my /etc/fstab as /dev/ROOTVG/rootlv / ext3 defaults 1 1 /dev/ROOTVG/varlv /var ext3 defaults 1 2 /dev/ROOTVG/optlv /opt ext3 defaults 1 2 /dev/ROOTVG/crashlv /var/crash ext3 defaults 1 2 /dev/ROOTVG/tmplv /tmp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/ROOTVG/swaplv swap swap defaults 0 0 /dev/APPVG/home /home ext3 defaults 1 2 /dev/APPVG/archives /archives ext3 defaults 1 2 /dev/APPVG/test /test ext3 defaults 1 2 /dev/APPVG/oracle /opt/oracle ext3 defaults 1 2 /dev/APPVG/ifeeds /xfiles ext3 defaults 1 2 I have a solaris server where the vfstab is defined as cat vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - /dev/vx/dsk/bootdg/swapvol - - swap - no - swap - /tmp tmpfs - yes size=1024m /dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs 1 no logging /dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no logging /dev/vx/dsk/bootdg/home /dev/vx/rdsk/bootdg/home /home ufs 2 yes logging /dev/vx/dsk/APP/test /dev/vx/rdsk/APP/test /test vxfs 3 yes - /dev/vx/dsk/APP/archives /dev/vx/rdsk/APP/archives /archives vxfs 3 yes - /dev/vx/dsk/APP/oracle /dev/vx/rdsk/APP/oracle /opt/oracle vxfs 3 yes - /dev/vx/dsk/APP/xfiles /dev/vx/rdsk/APP/xfiles /xfiles vxfs 3 yes - I am not able to find out the issue. Any help would be appreciated.

  Read the article

• Xen 4.1.2 unable to boot

  - by Devator

  I have installed Xen 3.1.2 perfectly, and it's running fine. However since that version is way outdated I just updated it to 4.1.2 by adding the gitco repository and then yum update. It installed fine, modified my grub.conf to reflect the changes but then on a reboot, it simply doesn't come back online (I can't see what's going on, as it's a rented dedicated server). What are my options? Booting into rescue mode and using the older kernel works fine, it will come back up. But once I use the xen.gz-4.1.2kernel, it won't come back up anymore and I need to use the rescue image.. My /boot/grub/grub.confis as follows: title CentOS (2.6.18-308.1.1.el5xen) root (hd0,1) #kernel /xen.gz-2.6.18-308.1.1.el5 dom0_mem=1024M kernel /xen.gz-4.1.2 module /vmlinuz-2.6.18-308.1.1.el5xen ro root=/dev/md1 module /initrd-2.6.18-308.1.1.el5xen.img When I uncomment the 3.1.2 kernel, it works fine, but booting with the 4.1.2 kernel fails and I have no idea what's going on. Hence my question: what are my options?

  Read the article

• Postfix not working

  - by user1488723

  A while ago I installed the postfix mail server on my ubuntu 10.04 VPS. At the time it was working good but now it's just stopped working. I was trying to enable SASL authentification and somewhere it must have went really wrong. I've studied the postfix main.cf and done everything in an orderly fashion to ensure that it is nothing wrong. I also have Dovecot installed and configured dovecot.conf to run with Postfix. If I try to do telnet localhost 25 while logged in on the server I just get: Connection closed by foreign host. If I try to do telnet mail.example.com 25 "from the outside" I get: telnet: Unable to connect to remote host: No route to host And when I check the server log after the failed attempts I see this: Jun 28 15:49:31 msv postfix/smtpd[11839]: initializing the server-side TLS engine Jun 28 15:49:31 msv postfix/smtpd[11839]: connect from localhost.localdomain[127.0.0.1] Jun 28 15:49:31 msv postfix/smtpd[11839]: warning: SASL: Connect to /var/spool/postfix/private/auth failed: Connection refused Jun 28 15:49:31 msv postfix/smtpd[11839]: fatal: no SASL authentication mechanisms Jun 28 15:49:32 msv postfix/master[11598]: warning: process /usr/lib/postfix/smtpd pid 11839 exit status 1 Jun 28 15:49:32 msv postfix/master[11598]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling main.cf file looks like this: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no delay_warning_time = 4h myhostname = mail.example.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydomain = example.com myorigin = $mydomain mydestination = $mydomain relayhost = mynetworks = 127.0.0.1 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all smtpd_use_tls = yes smtpd_tls_loglevel = 2 smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_sasl_auth_enable = yes smtpd_client_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = /var/spool/postfix/private/auth smtpd_sasl_security_options = noanonymous Dovecot.conf file looks like this: protocols = imap imaps disable_plaintext_auth = no log_timestamp = "%b %d %H:%M:%S " ssl = yes ssl_cert_file = /etc/postfix/ssl/smtpd.crt ssl_key_file = /etc/postfix/ssl/smtpd.key mail_location = maildir:~/mail mail_access_groups = mail auth_username_chars = abcdefghijklmnopqrstuvwxyz protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep } auth default { mechanisms = plain login passdb pam { } userdb passwd { } socket listen { client { path = /var/spool/postfix/private/auth user = postfix group = postfix mode = 0660 } } }

  Read the article

• Cacti is ignoring hash marks in interface aliases

  - by Matt Simmons

  I'm attempting to set up Cacti to monitor a router's interfaces, and I'm having trouble getting the graph templates to show the information that I'd like. Our interface configuration looks like this: interface GigabitEthernet3/6 description WalljackNumber # Server info no ip address no shutdown switchport switchport access vlan 116 switchport mode access ip dhcp snooping trust spanning-tree portfast The "Server Info" string is really just the machine name, and a short relevant description, such as "PolarSprings vmnic2". The important part appears to be that it follows the hashmark. When I run snmpwalk, I get the proper output: IF-MIB::ifAlias.230 = STRING: WalljackNumber # Server info But in Cacti, when I go into the graph templates and set the title to this: |host_description| - Traffic - |query_ifName| (|query_ifAlias|) All that shows up in the graph is: switchname - Traffic - Gi3/6 (WalljackNumber #) Which strikes me as a little weird. What I suppose MAY be happening is that somewhere in the cacti stream, it's interpreting # as being a comment and stripping everything after, but I'm not sure. I was hoping someone could tell me that this was a known documented behavior, or that I could change it in a setting that I wasn't aware of. The alternative answer is to change the delimiter from # to something else, but I've got over a thousand lit switchports on an old college infrastructure, and I'm not sure what else might be relying on them.

  Read the article

• No discs found when trying to install Windows 8 with UEFI

  - by Sahas Katta

  I have a Vizio Notebook (CN15-A5). It came pre-installed with Windows 8 x64 and is taking advantage of UEFI out of the box. The BIOS (APTOS AMI) is in Secure Boot mode with the OS selected as "Windows 8". I removed the stock HDD that came with the machine and put my own SSD into it. I created a Windows 8 Pro x64 installation disc on a 4GB USB flash drive formated as FAT32 since its apparently required for UEFI. When I boot from the USB Win8 installation disc, I get suck when I reach the "Custom: Install Windows only" section. Normally you would see a list of available discs and their partitions, however my entire list is blank. If I head back to the BIOS and disable Secure Boot and set the OS to "Other OS" and attempt again, I am able to see the list of available discs in the system and can install a copy of Windows 8. Unfortunately, doing it in this method results in an installation with a traditional 350 MB partition + OS partition instead of 4 partitions which is normal for a UEFI setup. Has anyone run into this problem? I've tried loading defaults in the BIOS and attempting to install via every combination with no luck. Any help would be appreciated.

  Read the article

• Shrink a Volume Group in LVM / Linux in order to install Windows on the freed space

  - by Stephan Kristyn

  I have a Volume Group with Unused space. This 40Gig should become an entidy in order to install Microsoft windows 7 on it. I do not have extra space on the drive - that is why I want to shrink the VG! LVG berta resides on sda2 and consists of lv_root lv_swap unused_space I want it to become lv_root lv_swap and have a seperate entidy made out of unused_space. Microsoft Windows 7 has to get installed on this entidy. I do not understand why Linux made simple things complicated. I utterly hate LVM and think its absolute bollocks. Useful Sources: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-system-config-lvm.html Edit: I found the answer. The necessary steps depict how complicated LVM really is. In my opinion it is best to avoiding LVM until pvresize matures as promised in its man pages. Answer: http://fedorasolved.org/Members/zcat/shrink-lvm-for-new-partition If you run into problems when you want to remove lvswap even if in resuce mode, then try swapoff /dev/vg_1/lv_swap lvchange -an /dev/vg_1/lv_swap

  Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >