Search Results

Search found 11466 results on 459 pages for 'geo ip'.

Page 339/459 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

  • Browsing is much slower on one PC wired to the same router - why?

    - by deanalt
    Wife is not happy. It takes about 5 seconds to open a google window, versus about 1 second on the faster computer which is about 3 years old itself. Yes, it is an older computer (5 -6 years old, I'd guess), surely with less RAM, but for simple browsing, should it matter? Both are hardwired to the same Netgear Rangemax router. Both use fixed IP addresses. Both are XP. Both have about 8 feet of cable to the router. I have the fastest service my cable provides. Probably irrelevant but ...two newer MACs are connected wirelessely during the summer and they are even faster, but I think that's the difference in browsers. If you could point me to a list of process of elimination steps that would be most appreciated. Thanks Dean

    Read the article

  • private subnet nat (openvpn / racoon)

    - by Jonas Schnelli
    I have a openvpn subnet 10.8.0.0/24 running one server and one client (laptop). openvpn works fine. Browsing the web over openvpn from the laptop works also fine. Now on the server there is a private subnet with 10.7.8.128/28. The subnet is set up with racoon (IPSEC s2s vpn). The s2s vpn allows me to access the subnet 10.3.5.0/24 at the other s2s vpn end. Works all fine when I'm connected with ssh to my server. From my laptop i can ping 10.7.8.129 (the servers ipsec local ip) but i cannot reach the net 10.3.5.0/24. I tried to add a static route on my laptop 10.3.5.0/24 over gw 10.7.8.129 with no success. Any ideas how i do setup the nat / routing? Thanks

    Read the article

  • Wireless only connects to Google

    - by dmanxiii
    I am using a netgear wireless router to connect to create a wireless network. When connected to the router via an Ethernet cable everything works correctly. When connecting to the router via wireless only Google can be accessed. I've done searches via Google using random words to make sure that it is not a cached page, and these all work. However, trying to connect to any non Google domain the page fails to load. I've accessed the connection with two different laptops, both are running Windows Vista. The network connection is strong on both, but the issue persists for both. Edit: I have configured the wireless networks name and password, and connect to that using the credentials I have defined. I am sure I am not connecting to a neighbors wireless network. Edit2: Typing in the direct IP address for CNN.com ( http://157.166.255.19 ) would not resolve.

    Read the article

  • Startech SVx41HDI Series Server Remote Control Usage Question - How do I switch away from a dead por

    - by tajh
    We have a Startech KVM over IP model SV841HDI and it was stuck pointing a port where the machine has been removed. We ended up having to physically plug something into that port in order to switch ports again, meaning that if someone in support accidentally switches to an empty port, we need to have a documented solution for making it useable again. The unit is old, no longer under warranty, firmware updates for it are no longer available (interestingly it runs a powerPC version of busybox). Since it does work well except for this one catch, we would like to avoid replacing it. Reading the manual, you have a several recommended methods. I tried them. Hit the left CTRL key a few times (as well as all the other popular KVM keys I could think of). The VNC GUI offers lots of buttons - none of them switch away from a dead port. The question is: how do I switch away from a dead port on this particular KVM remotely?

    Read the article

  • Can I ping via an arbitrary interface of a DD-WRT system? [migrated]

    - by bytebuster
    There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

    Read the article

  • export block device over network without root

    - by dschatz
    I'm trying to export a file as a block device over the network. I do not have root access on the machine where the file exists. I do have root access on the machine(s) where I will mount the block device. I've seen ATA-Over-Ethernet and ISCSI but there don't seem to be any implementations which allow me to export the block without root at least (some even require kernel modules). Is there an implementation of either of these or some other protocol that doesn't require root? Perhaps I can tunnel ethernet over IP to do this?

    Read the article

  • NAT for static private addresses

    - by biggdman
    Could someone please help me out with the following scenario: I have a machine that hosts 3 lxc containers, and acts like a router for them. The LXC containers have private ip addresses set on the interfaces that are connected to the host. I want to provide Internet access to the containers and I want to configure the host system so it translates only the addresses that are configured static on the lxc containers interfaces. Should I try to configure the host so it translates each of the 3 private addresses to the public address of the host's interface that is connected to the Internet?

    Read the article

  • Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

    - by MarianoC
    Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

    Read the article

  • Cloud services can't be reached from complex customer infrastructure

    - by Nock
    We have several services running on a cloud, they all are hosted on Windows Server 2012 R2, have public IP address and specific port. Some of our customers can't reach them because for "some reason" the ports are cut between a firewall between them and us. (some customers are using a shared internet connection in a multi tenant office and they can't change firewall communication) Well, you get it, we don't have the possibility to make all the firewall "allowing" the communication. My customers all runs Windows 7 at least. What is the best counter solution in such case, using Microsoft (Windows Server) technologies? The best would be some kind of tunneling communication or VPN, but the customer should also be able to access his/her enterprise resources. Bby the way, today we using IPSec using Windows Firewall to secure the communication, is IPSec tunneling a solution for us? Otherwise, is there a service in Windows to enable some kind of VPN between a client and a server but only for a given set of servers?

    Read the article

  • Any good phone system on a Windows Environment ?

    - by Kedare
    Hello, I am looking for a phone system that integrate well with a (almost) 100% Microsoft. I would like something that can integrate with Exchange and Active Directory (in-phone searching/calling by name (is this possible using SIP ?), etc) and if possible something not too expensive (Bye bye Cisco !), what do you recommend me ? I've heard of 3CX as IPBX and Aastra as Phones, are they good for this ? Or do you know something else good at this ? I've also seen some Alcatel IP Phones doing this (search by name, but I think that was a separated address book and not loaded from AD/Exchange) Thank you !

    Read the article

  • Unable to access internet if wireless enabled

    - by balki
    The following is my route output. eth0 is my wired network and eth1 is my wireless network. Only wired one has access to internet. If I enable wireless, I am not able to access internet, it tries to access via eth1 and I get 404 page of the wireless router. Why does eth1 have higher preference though default is eth0 (link)? [balakrishnan@mylap ~]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.26.0.1 0.0.0.0 UG 0 0 0 eth0 10.26.0.0 * 255.255.192.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 * 255.255.255.0 U 9 0 0 eth1

    Read the article

  • Unable to connect with PPTP (From Windows 8 to Ubuntu 12.10)

    - by jaja
    I'm trying to connect using PPTP to my VPS. At first, I got the problem that my connection (Wlan, which is what I use to connect to the Internet) goes "limited" (I can't connect to the Internet) when I connect to the VPN. Then, I used to get some long message, something like you might be trying using L2TP. Then now it's back again to the "limited" problem. What's the solution to that problem? One thing I'm not sure of is what I put as my local IP address in "sudo nano /etc/pptpd.conf" Is it 127.0.0.1? I'm following this tutorial: http://thesinclairs.gotdns.com/blog/set-up-a-pptp-vpn-on-ubuntu-server/

    Read the article

  • Is it effective installing firewall within same machine which offering service?

    - by Eonil
    I'm a starting a small service practically. And I have single server currently. No money to purchase separated/dedicated firewall equipment now. Is it effective installing firewall software on same machine which offering internet service? My server will offer HTTP, NFS, and SSH, and custom made server software on a several ports. (edit) All services (except NFS) should be open to internet. Not internal services. I guess my machine (virtualized within Xen) is connected to the internet directly because I can connect to my machine SSH with only IP address. (edit) NFS is not open to internet. Sorry for my mistake. NFS will be served via SSH only.

    Read the article

  • Bind dns server in Solaris 10 and win xp clients

    - by stevecomptech
    Hi, Added this in zone db file, I am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now I get this error when I try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do I need to change in order my win xp join the domain

    Read the article

  • CoovaAP router does not get DHCP settings from modem

    - by Dan Sosedoff
    Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

    Read the article

  • localhost works 127.0.0.1 does not IIS

    - by NickatUship
    Very weird problem on IIS. Never had it before: localhost works, but 127.0.0.1 does not. localhost pings to 127.0.0.1. www.mydomain.com also pings to that IP, which is set up in the hosts file, but that also doesnt work locally. I've ipconfig /flushdns 'd without success. Ive even restarted the server. Another server set up the exact same way works fine. Any ideas? To be clear, im accessing the URLs in IE like this: http://localhost http://127.0.0.1 http://www.mydomain.com I can telnet to port 80 without a problem for all 3

    Read the article

  • Remove a known network from Windows 8

    - by Edward Brey
    When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

    Read the article

  • What are good and bad jitter times for a LAN

    - by garyb32234234
    Ive just ran jperf (frontend to iperf) on our network between 2 workstations, its recorded jitter between 0.033ms and 0.048ms. Is this good or bad? Are there more variables that i would need to consider to make the decision? EDIT: TCP/IP Ethernet LAN 43 PCs 1 server, 100Mbits main switch, various small 8 port switches, test was done using UDP, Its a Windows Domain. I want to instal a few voip softphones on the workstations, see how many i can use that reliably work, im testing a few different workstations around the network to see where the best quality network paths are. Will also change some equipment if i identify bad connections.

    Read the article

  • Dediced server for all network functions?

    - by Alan
    I want to set up a fictional network configuration for a school in my neighborhood. They have about 50 computers altogether, 2X20 in computer rooms for students and another 10 scattered around for various professors. They should all access the internet through a dedicated Linux router machine. What they would like is to have domain names for those three computer groups. Lab1, Lab2 and Professors. The computers in Lab2 and Lab1 should have static ip and should all be named by numbers. So there should be 1@Lab1, 2@Lab1.... etc. And the Professors network should have a DHCP, with authentication. Is it an ok solution to have all these functions on a single server? (The one which will be used as a router) Do I have to set a local DNS for domain naming? Do the host names for Lab computers have to be set on the clients, or can they be automatically assigned?

    Read the article

  • Dhcp server change fail after successful importing to new machine

    - by Tathagata
    I transfered the configs of a dhcp server from one server to another both running Windows Server 2003 R2 following http [://] support.microsoft.com/kb/325473. The new server has a statically configured ip(outside the scope) like the old one. Stopped the server on the old, and started up in the new server (authorized too) - but when I ipconfig /renew from a client its network interface fails with all 0.0.0.0 (or 169...*). I read somewhere I need to reconcile the scope to sync the new registry values ('ll try this tomorrow). What other troubleshooting steps can I take other than these (which didn't help)? Things work fine when the old server resurrects and the new one is taken down. The new server showed there was no requests for offer.

    Read the article

  • Preventing my postfix to send my local users spam

    - by Jack
    I have a postfix/dovecot mail server with 100 different users. When they send an email they need to be authenticated. I successfully use saslauth to achieve this. Few days ago I had a problem. One specific user, probably with a virus or a spam-bot installed in its computer, started to send out through my server thousands of emails in few hours. As result, my ip has been blocked by many isp provider (@aol, @yahoo, and others) and has been listed in many blacklist, making all my 100 users unable to send any email to anyone. What is the best practice to avoid this problem? It would be great if my server could recognize a spamming user and automatically block it. Also, have a limit of, say, 30 emails per hour could be a partial solution. Any idea how to face this problem? Thank you

    Read the article

  • NetDiag + TCP Blocking?

    - by CrazyNick
    We are facing some issue with the sharepoint 2007 timer jobs everyday at a specific time, so decide to track the tcp blocking informartion during those hours using NetDiag tool. We are not able to find the required information if we uses "netdiag /test:ipsec", what is the command that can be used to pull the TCP blocking information and how to configure it? if i ran the command "netdiag /test:ipsec /debug" it is returning "IP Security test . . . . . . . . . : Skipped", what does it mean?

    Read the article

  • Configuring IIS site to use HTTPS

    - by James
    I am working on a REST API which I have currently deployed on a Win XP Professional SP2 development machine running IIS 5.1. The site is currently being hosted on port 81 and being accessed via HTTP. I would now like to configure the site to stop using HTTP and use HTTPS only. I have developed a self-signed certificate using the SelfSSL.exe tool from the 6.0 Resource Kit Tools and set the Common Name to be the IP of my server (as it's a local development machine it has no domain name). I have also already configured the site to use SSL using the How To Set Up an HTTPS Service in IIS tutorial as my guide. However, whenever I try to access a resource in the API via HTTPS I get a 404. Any ideas?

    Read the article

  • Mail being delivered to both old and new server.

    - by Duane
    Two days ago I migrated our old site to a new server. I turned down the ttl before I did it and some email is still going to our old server and some to our new after a little over 48 hours. Both these are on shared hostgator sites. From what I can tell everything is set up properly. An nslookup points to the right ip address. Any insight? Support just tells me that everything is set up properly and I have to wait for propagation. I've never had it take over 48 hours though.

    Read the article

  • Apache ProxyPass/ProxyPassReverse to IIS

    - by Dana
    We have an ASP.NET web application which is mapped to a folder on an apache hosted php site using ProxyPass.ProxyPassReverse. A couple of problems being encountered. cookies are being lost which breaks the site navigation, this can be overcome by setting the asp app as cookieless. Forms authentication is used on the ASP site, this is also broken withe the proxypass in place, suspect this is cookie related also. ASP site works ok when run from a domain/ip address. Use of a separate domain / sub-domain is not an option duew to client requirements.

    Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >