Search Results

Search found 11210 results on 449 pages for 'get the title'.

Page 339/449 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

  • how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

    - by Oleksandr Dudchenko
    I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

    Read the article

  • Review: Backbone.js Testing

    - by george_v_reilly
    Title: Backbone.js Testing Author: Ryan Roemer Rating: $stars(4.5) Publisher: Packt Copyright: 2013 ISBN: 178216524X Pages: 168 Keywords: programming, testing, javascript, backbone, mocha, chai, sinon Reading period: October 2013 Backbone.js Testing is a short, dense introduction to testing JavaScript applications with three testing libraries, Mocha, Chai, and Sinon.JS. Although the author uses a sample application of a personal note manager written with Backbone.js throughout the book, much of the material would apply to any JavaScript client or server framework. Mocha is a test framework that can be executed in the browser or by Node.js, which runs your tests. Chai is a framework-agnostic TDD/BDD assertion library. Sinon.JS provides standalone test spies, stubs and mocks for JavaScript. They complement each other and the author does a good job of explaining when and how to use each. I've written a lot of tests in Python (unittest and mock, primarily) and C# (NUnit), but my experience with JavaScript unit testing was both limited and years out of date. The JavaScript ecosystem continues to evolve rapidly, with new browser frameworks and Node packages springing up everywhere. JavaScript has some particular challenges in testing—notably, asynchrony and callbacks. Mocha, Chai, and Sinon meet those challenges, though they can't take away all the pain. The author describes how to test Backbone models, views, and collections; dealing with asynchrony; provides useful testing heuristics, including isolating components to reduce dependencies; when to use stubs and mocks and fake servers; and test automation with PhantomJS. He does not, however, teach you Backbone.js itself; for that, you'll need another book. There are a few areas which I thought were dealt with too lightly. There's no real discussion of Test-driven_development or Behavior-driven_development, which provide the intellectual foundations of much of the book. Nor does he have much to say about testability and how to make legacy code more testable. The sample Notes app has plenty of testing seams (much of this falls naturally out of the architecture of Backbone); other apps are not so lucky. The chapter on automation is extremely terse—it could be expanded into a very large book!—but it does provide useful indicators to many areas for exploration. I learned a lot from this book and I have no hesitation in recommending it. Disclosure: Thanks to Ryan Roemer and Packt for a review copy of this book.

    Read the article

  • Star rating not showing in rich snippets

    - by Danny R
    We've recently been doing a lot of work on our site's SEO (www.betterthanreviews.com). We recently did a push to update the rich snippets breadcrumb, meta description, and star rating. After giving Google some time to index the site, it has updated the breadcrumbs and meta descriptions for our review pages, but the stars are still not showing. This is currently how it appears on a Google search (link to the actual page: http://www.betterthanreviews.com/home-security/livewatch): This is what the Rich Snippets is supposed to look like, and how it appears in Google's testing tool: More context: As seen in our html, we are using schema.org language. We initially were using schema.org/Corporation for the site, but we now have the page labeled as schema.org/HomeAndConstructionBusiness because Google will not show star ratings for the Corporation language. However, in our Webmaster Tools, the Structured Data is still showing the Corporation language, which could be a potential issue. Here is a look at some of the coding that we used. But it can be looked at closer by inspecting the element: <div class="aggregate-rating" itemprop="aggregateRating" itemscope="" itemtype="http://schema.org/AggregateRating"> <div class="review row_fluid" itemprop="review" itemscope="" itemtype="http://schema.org/Review"> <div class="row_fluid rating" itemprop="reviewRating" itemscope="" itemtype="http://schema.org/Rating"> <meta content="4.5" itemprop="ratingValue" title="4.5 out of 5 stars" class="star-rating-readonly"> <meta content="2013-12-05" itemprop="datePublished"> <p class="review-headline" itemprop="headline">Way better than my previous system</p> <div> <p class="reviewer" itemprop="author">Scott H. </p> <span class="bullet">•</span> <p class="created_at">2 months ago</p> <p class="content" itemprop="description">I love it! The experience I have had so far is extremely positive. I had another alarm system before and I didn't like it but this one is really nice. I am telling everybody about it.</p> </div> </div> Any suggestions for how to fix this?

    Read the article

  • XNA Notes 001

    - by George Clingerman
    Just a quick recap of things I noticed going on in or around the XNA community this past week. I’m sure there’s a lot I missed (it’s a pretty big community with lots of different parts to it) but these where the things I caught that I thought were pretty cool. The XNA Team Michael Klucher gave a list of books every gamer should read. http://twitter.com/#!/mklucher/status/22313041135673344 Shawn Hargreaves posted Nelxon Studio posting about a cheatsheet for converting 3.1 to 4.0 http://blogs.msdn.com/b/shawnhar/archive/2011/01/04/xna-3-1-to-4-0-cheat-sheet.aspx?utm_source=twitterfeed&utm_medium=twitter XNA Game Studio won the Frontline award for Programming Tool by GameDev magazine! Congrats to the XNA team! http://www.gdmag.com/homepage.htm XNA MVPs In January several MVPs were up for re-election, Jim Perry, Andy ‘The ZMan’ Dunn, Glenn Wilson and myself were all re-award a Microsoft MVP award for their contributions to the XNA/DirectX communities. https://mvp.support.microsoft.com/communities/mvp.aspx?product=1&competency=XNA%2fDirectX A movement to get Michael McLaughlin an MVP award has started and you can join in too! http://twitter.com/#!/theBigDaddio/status/22744458621620224 http://www.xnadevelopment.com/MVP/MichaelMcLaughlinMVP.txt Don’t forget you can nominate ANYONE for a MVP award, that’s how they work. https://mvp.support.microsoft.com/gp/mvpbecoming  XNA Developers James Silva of Ska Studios hit 9,200 sales of ZP2KX and recommends you listen to Infected Mushroom. http://twitter.com/#!/Jamezila/status/22538865357094912 http://en.wikipedia.org/wiki/Infected_Mushroom Noogy creator of the upcoming XBLA title Dust an Elysian tail posts some details into his art creation. http://noogy.com/image/statue/statue.html Xbox LIVE Indie Game News Microsoft posts acknowledging there was an issue with the sales data that has been addressed and apologized for not posting about it sooner. http://forums.create.msdn.com/forums/p/71347/436154.aspx#436154 Winter Uprising sales still chugging along and being updated by Xalterax (by those developers willing to actually share sales numbers. Thanks for sharing guys, much appreciated!) http://forums.create.msdn.com/forums/t/70147.aspx Don’t forget about Dream Build Play coming up in February! http://www.dreambuildplay.com/Main/Home.aspx The Best Xbox LIVE Indie Games December Edition comes out on NeoGaf http://www.neogaf.com/forum/showthread.php?t=414485 The Greatest XBox LIVE Indie Games of 2010 on DealSpwn – Congrats to DrMistry and MStarGames for his #1 spot with his massive XBLIG Space Pirates From Tomorrow! http://www.dealspwn.com/xbligoty-2010/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+Dealspwn+%28Dealspwn%29 XNA Game Development The future of XACT and WP7 has finally been confirmed and we finally know what our options are for looping audio seamlessly on WP7. http://forums.create.msdn.com/forums/p/61826/436639.aspx#436639  Super Mario 3 Design Notes is an interesting read for XBLIG developers, giving some insight to the training that natural occurs for players as they start playing the game. Good things for XBLIG developers to think about. http://www.significant-bits.com/super-mario-bros-3-level-design-lessons

    Read the article

  • How to shoot yourself in the foot (DO NOT Read in the office)

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

    Read the article

  • How to recover from finite-state-machine breakdown?

    - by Earl Grey
    My question may seems very scientific but I think it's a common problem and seasoned developers and programmers hopefully will have some advice to avoid the problem I mention in title. Btw., what I describe bellow is a real problem I am trying to proactively solve in my iOS project, I want to avoid it at all cost. By finite state machine I mean this I have a UI with a few buttons, several session states relevant to that UI and what this UI represents, I have some data which values are partly displayed in the UI, I receive and handle some external triggers (represented by callbacks from sensors). I made state diagrams to better map the relevant scenarios that are desirable and alowable in that UI and application. As I slowly implement the code, the app starts to behave more and more like it should. However, I am not very confident that it is robust enough. My doubts come from watching my own thinking and implementation process as it goes. I was confident that I had everything covered, but it was enough to make a few brute tests in the UI and I quickly realized that there are still gaps in the behavior ..I patched them. However, as each component depends and behaves based on input from some other component, a certain input from user or some external source trigers a chain of events, state changes..etc. I have several components and each behave like this Trigger received on input - trigger and its sender analyzed - output something (a message, a state change) based on analysis The problem is, this is not completely selfcontained, and my components (a database item, a session state, some button's state)...COULD be changed, influenced, deleted, or otherwise modified, outside the scope of the event-chain or desirable scenario. (phone crashes, battery is empty phone turn of suddenly) This will introduce a nonvalid situation into the system, from which the system potentially COULD NOT BE ABLE to recover. I see this (althought people do not realize this is the problem) in many of my competitors apps that are on apple store, customers write things like this "I added three documents, and after going there and there, i cannot open them, even if a see them." or "I recorded videos everyday, but after recording a too log video, I cannot turn of captions on them.., and the button for captions doesn't work".. These are just shortened examples, customers often describe it in more detail..from the descriptions and behavior described in them, I assume that the particular app has a FSM breakdown. So the ultimate question is how can I avoid this, and how to protect the system from blocking itself? EDIT I am talking in the context of one viewcontroller's view on the phone, I mean one part of the application. I Understand the MVC pattern, I have separate modules for distinct functionality..everything I describe is relevant to one canvas on the UI.

    Read the article

  • ADF Code Guidelines

    - by Chris Muir
    During Oracle Open World 2012 the ADF Product Management team announced a new OTN website, the ADF Architecture Square.  While OOW represents a great opportunity to let customers know about new and exciting developments, the problem with making announcements during OOW however is customers are bombarded with so many messages that it's easy to miss something important. So in this blog post I'd like to highlight as part of the ADF Architecture Square website, one of the initial core offerings is a new document entitled ADF Code Guidelines. Now the title of this document should hopefully make it obvious what the document contains, but what's the purpose of the document, why did Oracle create it? Personally having worked as an ADF consultant before joining Oracle, one thing I noted amongst ADF customers who had successfully deployed production systems, that they all approached software development in a professional and engineered way, and all of these customers had their own guideline documents on ADF best practices, conventions and recommendations.  These documents designed to be consumed by their own staff to ensure ADF applications were "built right", typically sourced their guidelines from their team's own expert learnings, and the huge amount of ADF technical collateral that is publicly available.  Maybe from manuals and whitepapers, presentations and blog posts, some written by Oracle and some written by independent sources. Now this is all good and well for the teams that have gone through this effort, gathering all the information and putting it into structured documents, kudos to them.  But for new customers who want to break into the ADF space, who have project pressures to deliver ADF solutions without necessarily working on assembling best practices, creating such a document is understandably (regrettably?) a low priority.  So in recognising this hurdle, at Oracle we've devised the ADF Code Guidelines.  This document sets out ADF code guidelines, practices and conventions for applications built using ADF Business Components and ADF Faces Rich Client (release 11g and greater).  The guidelines are summarized from a number of Oracle documents and other 3rd party collateral, with the goal of giving developers and development teams a short circuit on producing their own best practices collateral. The document is not a final production, but a living document that will be extended to cover new information as discovered or as the ADF framework changes. Readers are encouraged to discuss the guidelines on the ADF EMG and provide constructive feedback to me (Chris Muir) via the ADF EMG Issue Tracker. We hope you'll find the ADF Code Guidelines useful and look forward to providing updates in the near future. Image courtesy of paytai / FreeDigitalPhotos.net

    Read the article

  • Databases and Beer

    - by Johnm
    It is a bit of a no-brainer: Include the word "beer" in a subject line of an e-mail or blog post title and you can be certain that it will be read. While there are times this practice might be a ploy to increase readership, it is not the case for this blog post. There is inspiration that can be drawn from other industries to which we, as database professionals, can apply in our industry. In this post I will highlight one of my favorite participants of the brewing industry. The Boston Beer Company started in the 1970s in Boston, Massachusetts. Others may be more familiar with this company through their Samuel Adams Boston Lager and other various seasonal beers. I am continually inspired by their commitment to mastery of the brewing process to which they evangelize frequently in their commercials. They also are continually in pursuit of pushing the boundaries of beer as we know it while working within traditional constraints. A recent example of this is their collaboration with Weihenstephan Brewery of Munich, Germany to produce the soon to be released Infinium beer. This beer, while brewed as an ale, is touted as something closer to something like Champaign - all while complying with the Reinheitsgebot. The Reinheitsgebot is also known as the "German Beer Purity Law" which was originated in 1516. This law states that beer is to consist of water, barley, hops and yeast. That's it. Quite a limiting constraint indeed. and yet, The Boston Beer Company pushed forward. Much like the process of brewing, the discipline of database design and architecture is one that is continually in process and driven by the pursuit of mastery. While we do not have purity laws to constrain us, we have many other types: best practices, company policies, government regulations, security and budgets. Through our fellow comrades, we discuss the challenges and constraints in which we operate. We boil down the principles and theories that define our profession. We reassemble these into something that is complementary to the business needs that we must fulfill. As a result, it is not uncommon to see something amazingly innovative in a small business who is pushing the boundaries of their database well beyond its intended state. It is equally common to see innovation in the use of features available in the more advanced features of databases that are found in large businesses. The tag line for The Boston Beer Company is: "Take Pride In Your Beer.", I would like to offer an alternative and say "Take Pride In Your Database." So, As you pour your next Boston Lager into a frosted glass, consider those who spend their lives mastering the craft of brewing and strive to interject their spirit into everything that you do as a database professional. Cheers!

    Read the article

  • How to Deal with a Difficult Boss?

    - by Anonymous
    I have some problems with my boss, it's quite a long story :) About one year ago, I'm working as team leader of project X. Everything work fine until one of my fellow (staff) flame me that I have problem with ALL member in our team, that guy also flame me to other staff that I report them with a poor performance. My boss call me and blame me without ask a single question. I try to explain everything to my boss but she doesn't listen to me. One month later, we have a meeting. This is only team leader's meeting, my boss talk about this problem with other team leader. There are two person who have worked with this guy, they all say "This guy cannot trust". That guy had do same thing same problem with his former team leader. Finally, everything's clear and I think I gain some trust from her. I can say that I'm the best team leader in her hand, as only project that archive more than 120% profit. Then I move to new project, this is bigger project and I can manage it quite good. But I have a problem again. One of my staff always leave and does not follow our company rule, I call him to talk and tell him that you cannot do this because that's not allow in our company. He also changed working time record file of himself, then I call him to warn again. This time he ask me to move to another project so I go to talk to my boss. She come to my building when I'm not there (other staff call me) and talk with that guy (who have problem with me); I think she still not trust me. And AGAIN, she believe what that guy said and I got blamed. I want to know how can I deal with this kind of boss, or is it better to find a new job, or any other suggestion about this problem? Thank you :) Additional information: Even my job title is "Team Leader" but it's my responsibility to manage staff working time and their behavior. This responsible is my company's rule.

    Read the article

  • Game Review: God of Light

    Luckily I came across this title at a very early stage. If I remember correctly, I took notice of God of Light on Twitter right on the weekend it has been published on the Play Store. "Sit back and become immersed into the world of God of Light, the game that rethinks the physics puzzle genre with its unique environment exploration gameplay, amazing graphics and exclusive soundtrack created by electronic music icon UNKLE. Join cute game mascot, Shiny, on his way to saving the universe from the impending darkness. Play through a variety of exciting game worlds and dozens of levels with mind-blowing puzzles. Your goal is to explore game levels, seek for game objects that reflect, split, combine, paint, bend and teleport rays of light energy to activate the Sources of Life and bring light back to the universe." Mastering the various reflection items in God of Light is very easy to learn and new elements are introduced during the game. Amazing puzzle game Here's the initial review I posted on the Play Store: "Great change in puzzles Fantastic and refreshing concept of puzzle solving. The effects and the music match very well, putting the player in the right mood to game. Get enlightened and grow your skills until you are a true God of Light." And it remains true, even after completing the first realm completely. Similar to Quell it took me only a couple of hours during the evening to complete all levels in the available three realms, unfortunately. God of Light currently consists of 75 levels, well it's 25 in each realm to be precise, and the challenges are increasing. Compared to the iOS version from the AppStore, God of Light is available for free on Android - at least the first realm (25 levels). Unlocking the other two remaining realms is done through an in-app purchase. The visual appearance, the sound effects and the background music provided by UNKLE makes God of Light a superb package for any puzzle gamer. Whether it is simply reflecting light over multiple mirrors, or later on bending the rays of light with black holes, or using prisms to either split, enforce, or colourise your beam, God of Light is great fun and offers a good amount of joy. Check out the following screenshots for some impressions. God of Light: Astonishing graphics and visual appeal throughout the game God of Light - Introduction to the game during the first levels. New light items are introduced at each stage during the game play God of Light: Increasing complexity and puzzle fun Hopefully, Playmous is going to provide more astonishing looking realms and interesting gimmicks in future versions. Play Store: God of Light Also, check out the latest game updates on the official web site of Playmous

    Read the article

  • runtime error: invalid memory address or nil pointer dereference

    - by Klink
    I want to learn OpenGL 3.0 with golang. But when i try to compile some code, i get many errors. package main import ( "os" //"errors" "fmt" //gl "github.com/chsc/gogl/gl33" //"github.com/jteeuwen/glfw" "github.com/go-gl/gl" "github.com/go-gl/glfw" "runtime" "time" ) var ( width int = 640 height int = 480 ) var ( points = []float32{0.0, 0.8, -0.8, -0.8, 0.8, -0.8} ) func initScene() { gl.Init() gl.ClearColor(0.0, 0.5, 1.0, 1.0) gl.Enable(gl.CULL_FACE) gl.Viewport(0, 0, 800, 600) } func glfwInitWindowContext() { if err := glfw.Init(); err != nil { fmt.Fprintf(os.Stderr, "glfw_Init: %s\n", err) glfw.Terminate() } glfw.OpenWindowHint(glfw.FsaaSamples, 1) glfw.OpenWindowHint(glfw.WindowNoResize, 1) if err := glfw.OpenWindow(width, height, 0, 0, 0, 0, 32, 0, glfw.Windowed); err != nil { fmt.Fprintf(os.Stderr, "glfw_Window: %s\n", err) glfw.CloseWindow() } glfw.SetSwapInterval(1) glfw.SetWindowTitle("Title") } func drawScene() { for glfw.WindowParam(glfw.Opened) == 1 { gl.Clear(gl.COLOR_BUFFER_BIT) vertexShaderSrc := `#version 120 attribute vec2 coord2d; void main(void) { gl_Position = vec4(coord2d, 0.0, 1.0); }` vertexShader := gl.CreateShader(gl.VERTEX_SHADER) vertexShader.Source(vertexShaderSrc) vertexShader.Compile() fragmentShaderSrc := `#version 120 void main(void) { gl_FragColor[0] = 0.0; gl_FragColor[1] = 0.0; gl_FragColor[2] = 1.0; }` fragmentShader := gl.CreateShader(gl.FRAGMENT_SHADER) fragmentShader.Source(fragmentShaderSrc) fragmentShader.Compile() program := gl.CreateProgram() program.AttachShader(vertexShader) program.AttachShader(fragmentShader) program.Link() attribute_coord2d := program.GetAttribLocation("coord2d") program.Use() //attribute_coord2d.AttribPointer(size, typ, normalized, stride, pointer) attribute_coord2d.EnableArray() attribute_coord2d.AttribPointer(0, 3, false, 0, &(points[0])) //gl.DrawArrays(gl.TRIANGLES, 0, len(points)) gl.DrawArrays(gl.TRIANGLES, 0, 3) glfw.SwapBuffers() inputHandler() time.Sleep(100 * time.Millisecond) } } func inputHandler() { glfw.Enable(glfw.StickyKeys) if glfw.Key(glfw.KeyEsc) == glfw.KeyPress { //gl.DeleteBuffers(2, &uiVBO[0]) glfw.Terminate() } if glfw.Key(glfw.KeyF2) == glfw.KeyPress { glfw.SetWindowTitle("Title2") fmt.Println("Changed to 'Title2'") fmt.Println(len(points)) } if glfw.Key(glfw.KeyF1) == glfw.KeyPress { glfw.SetWindowTitle("Title1") fmt.Println("Changed to 'Title1'") } } func main() { runtime.LockOSThread() glfwInitWindowContext() initScene() drawScene() } And after that: panic: runtime error: invalid memory address or nil pointer dereference [signal 0xb code=0x1 addr=0x0 pc=0x41bc6f74] goroutine 1 [syscall]: github.com/go-gl/gl._Cfunc_glDrawArrays(0x4, 0x7f8500000003) /tmp/go-build463568685/github.com/go-gl/gl/_obj/_cgo_defun.c:610 +0x2f github.com/go-gl/gl.DrawArrays(0x4, 0x3, 0x0, 0x45bd70) /tmp/go-build463568685/github.com/go-gl/gl/_obj/gl.cgo1.go:1922 +0x33 main.drawScene() /home/klink/Dev/Go/gogl/gopher/exper.go:85 +0x1e6 main.main() /home/klink/Dev/Go/gogl/gopher/exper.go:116 +0x27 goroutine 2 [syscall]: created by runtime.main /build/buildd/golang-1/src/pkg/runtime/proc.c:221 exit status 2

    Read the article

  • facebook share and opengraph

    - by hannit cohen
    I'm managing a video blog. The blog contains a main youtube video on the homepage and several thumbnail images of other videos elsewhere. I have a share button for the main page and the single posts pages and have added opengraph to specify the used image. For some reason facebook ignores my opengraph image and uses othe images it finds in the page... the header looks like this: (for the homepage) <!-- Facebook Opengraph --> <meta property="fb:app_id" content="155967927783206" /> <meta property="og:url" content="http://mttv.co.il/2010/12/%d7%9e%d7%a4%d7%92%d7%a9-%d7%a1%d7%99%d7%99%d7%a2%d7%95%d7%aa-%d7%92%d7%a0%d7%a0%d7%95%d7%aa-%d7%9c%d7%93%d7%95%d7%a8%d7%aa%d7%99%d7%94%d7%9d-1959-2010-%d7%91%d7%9e%d7%a2%d7%9c%d7%95%d7%aa/"/> <meta property="og:title" content="???? ?????? ????? ???????? 1959-2010 ??????" /> <meta property="og:description" content="???? ????? ?? ?????? ????? ?????? ????????? ???? ?????? 1959 ??? 2010 ?????? ????? ??????? ???' ??? ??? ????? ???? ??????? ???????? ?????? ?&quot;? ???? ??? ?&quot;? ????? ?????? ????? ???? 08.12.10 " /> <meta property="og:type" content="article" /> <meta property="og:image" content="http://www.mttv.co.il/wp-content/uploads/2010/12/Gvi91UEjCAw_mid-135x77.jpg" /> The website address is: http://mttv.co.il Any help will be appreciated

    Read the article

  • SQL SERVER – Free eBook Download – EPUB, MOBI, PDF Format

    - by pinaldave
    Microsoft has released recently free eBooks on various Microsoft Technology. The best part is that all these books are available in ePub, Mobi and PDF. You can download them to your local machine or eBook reader and read them. This is a great start as many important subjects are now covered and converted into an eBook. I personally read through a few of the books and found they are very comprehensive and and detailed. The goal is not to cover complete technology in a single book but rather pick a single topic and discuss it in detail. The source of the book is white paper, Technet wiki as well book online and it is clearly listed right bellow the book title. Following are the books available for SQL Server Technology and I encourage all of you to have a look at them as they are great resources. Master Data Services Capacity Guidelines Microsoft SQL Server AlwaysOn Solutions Guide for High Availability and Disaster Recovery Microsoft SQL Server Analysis Services Multidimensional Performance and Operations Guide QuickStart: Learn DAX Basics in 30 Minutes SQL Server 2012 Transact-SQL DML Reference You can download above eBooks from here. This is indeed a great attempt as each book talks about the a single subject in depth keeping author focus on the single and simple subject. I have previously written two books by focusing on the same subject and I had great pleasure writing it as well. Writing on focus subjects gives complete freedom to author to explore the a single subject without having burden to cover everything which is associated with that technology at large. Just like eBooks mentioned earlier my SQL Server Wait Stats was inspired from my article series on SQL Wait Stats. The latest book SQL Server Interview Question and Answers was derived from my article series on SQL Interview Q and A. Writing book is an absolutely different concept than writing blog posts. When I was converting my blog posts to books, I ended up writing 50% new material and end up removing many repetitive content which shows up in blog series. It was indeed fun to focused book at the same time it was a great learning experience as an individual. Reference: TechNet Wiki, Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Sign up Today for User Feedback Sessions at Oracle OpenWorld and JavaOne 2012

    - by Lionel Dubreuil
    You’re Invited to Sign Up for Oracle Usability Feedback Sessions SIGN UP TODAY to get the most from your conference experience by participating in a usability feedback session where your expertise will help Oracle develop outstanding products and solutions. The Oracle User Experience team is conducting a Usability Evaluation on publishing and accessing Oracle Enterprise Repository content when building SOA projects in JDeveloper. We are asking Developers and Architects who build or integrate applications using SOA Suite to take a look at the interaction between JDeveloper with the Enterprise Repository.  We are looking for feedback on the interaction between JDeveloper and Oracle Enterprise Repository so that we may improve the User Interface in a future release. The feedback sessions will be conducted during the Oracle OpenWorld and JavaOne Conferences, at the Intercontinental Hotel in San Francisco, CA. Sessions will last 1 hour and will be held on Monday, October 1 through Wednesday, October 3, 2012. This event fills up quickly, and space is limited. If you are interested in participating, please send an email to gozel.aamoth-AT-oracle-DOT-com with the following information: Identification Name: _________________________________ Company Name:  _________________________ Job Title: Email: Phone Number (work, mobile, include country code): Which conference are you attending? _____Oracle OpenWorld _____JavaOne Have you ever participated in usability activities with Oracle or any of its subsidiaries? ____Yes; specify __________________________________________________ ____No Are you currently using JDeveloper? ____Yes ; specify version(s): _______________________________ ____No How long have you used JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years Are you currently using SOA features in JDeveloper? ____Yes ____No How long have you used SOA features in JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years How often do you use SOA features in JDeveloper? ____ Daily ____ 2 - 3 times a week ____ Once a week  ____ Once a month or less Briefly describe the types of SOA tasks you use JDeveloper to perform: _____________________________________ _____________________________________ Please list your availability If you know your availability; please let me know which day you would prefer to participate, Monday, Tuesday or Wednesday. Limited sessions are available on each day, and each session lasts 1 hour. Thank you for taking the time to complete this questionnaire.  It will help us match you to the best suited feedback session. Once we receive your email, we will contact you to set up a time and day for participation. You'll find more information about our on-site lab on the VoX (Voice of User Experience) blog, and on our Events page at Usable Apps.

    Read the article

  • Sign up Today for User Feedback Sessions at Oracle OpenWorld and JavaOne 2012

    - by Lionel Dubreuil
    You’re Invited to Sign Up for Oracle Usability Feedback Sessions SIGN UP TODAY to get the most from your conference experience by participating in a usability feedback session where your expertise will help Oracle develop outstanding products and solutions. The Oracle User Experience team is conducting a Usability Evaluation on publishing and accessing Oracle Enterprise Repository content when building SOA projects in JDeveloper. We are asking Developers and Architects who build or integrate applications using SOA Suite to take a look at the interaction between JDeveloper with the Enterprise Repository.  We are looking for feedback on the interaction between JDeveloper and Oracle Enterprise Repository so that we may improve the User Interface in a future release. The feedback sessions will be conducted during the Oracle OpenWorld and JavaOne Conferences, at the Intercontinental Hotel in San Francisco, CA. Sessions will last 1 hour and will be held on Monday, October 1 through Wednesday, October 3, 2012. This event fills up quickly, and space is limited. If you are interested in participating, please send an email to [email protected] with the following information: Identification Name: _________________________________ Company Name:  _________________________ Job Title: Email: Phone Number (work, mobile, include country code): Which conference are you attending? _____Oracle OpenWorld _____JavaOne Have you ever participated in usability activities with Oracle or any of its subsidiaries? ____Yes; specify __________________________________________________ ____No Are you currently using JDeveloper? ____Yes ; specify version(s): _______________________________ ____No How long have you used JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years Are you currently using SOA features in JDeveloper? ____Yes ____No How long have you used SOA features in JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years How often do you use SOA features in JDeveloper? ____ Daily ____ 2 - 3 times a week ____ Once a week  ____ Once a month or less Briefly describe the types of SOA tasks you use JDeveloper to perform: _____________________________________ _____________________________________ Please list your availability If you know your availability; please let me know which day you would prefer to participate, Monday, Tuesday or Wednesday. Limited sessions are available on each day, and each session lasts 1 hour. Thank you for taking the time to complete this questionnaire.  It will help us match you to the best suited feedback session. Once we receive your email, we will contact you to set up a time and day for participation. You'll find more information about our on-site lab on the VoX (Voice of User Experience) blog, and on our Events page at Usable Apps.

    Read the article

  • MPEG-2 playback inconsistent

    - by DustByte
    Many years ago I gave up on Linux because video playback was choppy. Now I'm back, and video playback is still playing up... I have two MPEG files: good.mpg bad.mpg. Here is some information about the two files, using avprobe: My machine is Intel Core 2 Duo E8400 @ 3.00GHz x 2, 64-bit. I do not know what graphics card I have. I run Ubuntu 12.04. So far I have had no problems with YouTube and playback of various video files, including playback of the file good.mpg, included in the avprobe snapshot above. However, the file bad.mpg gives me headache! The file bad.mpg is produced by a respectable "Old-video-tapes-to-DVD" company. I converted over 10 Video-8 tapes to MPEG through them, and today I collected my hard drive containing the MPEG files. Unfortunately I have problem watching them! Here are some details: Using Totem Movie Player 3.0.1 works well for several seconds, then it gets choppy and the playback is not at all smooth. Also the player easily freezes for a while when trying to jump to another position in the file. Most strangely though, the total time is shown as 0:42 (42 seconds) instead of the true 00:39:11: The VLC media player is doing a better job. It shows the correct total length, but as soon as I jump in the video to a new position, it stalls. Playback also stalls after 30 seconds if I press play and leave it. Using Handbrake and choosing bad.mpg as the source, gives me: There is only one title to choose, and it is 6 min 53 seconds. I would have guessed the full 39 minutes of the video should have shown. Lastly, putting the file bad.mpg in Dropbox and viewing it on my iPad with the Dropbox app seems fine (disregard the lack of easy jumping forward due to real-time encoding when streaming it). My question is simple: What is going on?! Why do I have problem to play the MPEG-2 files I just paid good money for (the issue with bad.mpg applies to all files I had encoded)? Is it an issue with my particular Linux machine? The graphics card? But why has everything worked fine so far, and why does not the good.mpg file cause any problems?

    Read the article

  • Will polishing my current project be a better learning experience than starting a new one?

    - by Alejandro Cámara
    I started programming many years ago. Now I'm trying to make games. I have read many recommendations to start cloning some well known games like galaga, tetris, arkanoid, etc. I have also read that I should go for the whole game (including menus, sound, score, etc.). Yesterday I finished the first complete version of my arkanoid clone. But it is far from over. I can still work on it for months (I program as a hobby in my free time) implementing a screen resolution switcher, remap of the control keys, power-ups falling from broken bricks, and a huge etc. But I do not want to be forever learning how to clone ONE game. I have the urge to get to the next clone in order to apply some design ideas I have come upon while developing this arkanoid clone (at the same time I am reading the GoF book and much source code from Ludum Dare 21 game contest). So the question is: Should I keep improving the arkanoid clone until it has all the features the original game had? or should I move to the next clone (there are almost infinite games to clone) and start mending the things I did wrong with the previous clone? This can be a very subjective question, so please restrain the answers to the most effective way to learn how to make my own games (not cloning someone ideas). Thank you! CLARIFICATION In order to clarify what I have implemented I make this list: Features implemented: Bouncing capabilities (the ball bounces on walls, on bricks, and on the bar). Sounds when bouncing on bricks and the bar, and when the player wins or loses. Basic title menu (new game and exit only). Also in-game menu and win/lose menus. Only three levels, but the map system is so easy I do not think it will teach me much (am I wrong?). Features not-implemented: Power-ups when breaking the bricks. Complex bricks (with more than one "hit point" and invincible). Better graphics (I am not really good at it). Programming polishing (use more intensively the design patterns). Here's a link to its (minimal) webpage: http://blog.acamara.es/piperine/ I kind of feel ashamed to show it, so please do not hit me too hard :-) My question was related to the not-implemented features. I wondered what was the fastest (optimal) path to learn. 1) implement the not-implemented features in this project which is getting big, or 2) make a new game which probably will teach me those lessons and new ones. ANSWER I choose @ashes999 answer because, in my case, I think I should polish more and try to "ship" the game. I think all the other answers are also important to bear in mind, so if you came here having the same question, before taking a rush decision read all the discussion. Thank you all!

    Read the article

  • 2011 - ALMs for your development team and the people they work with.

    - by David V. Corbin
    Welcome to 2011, it is already shaping up to be a very exciting year. The title of the post is not about charitable giving, although that is also a great topic. Application Lifecycle Management and the Systems that support the environment is, and 2011 will be a year where I expect many teams to invest heavily in this area. For those not familiar with ALM, it can be simplified down to "A comprehensive view of all of the iteas, requirements, activities and artifacts that impact an application over the course of its lifecycle, from concept until decommissioning". Obviously, this encompases a large number of different areas even for relatively small and medium sized projects. In recent years, many teams have adapted methodoligies which address individual aspects of this; but the majority of this adoption has resulted in "islands of improvement" rather than the desired comprehensive outcome...Until now! Last year Microsoft released Team Foundation Server 2010 along with Visual Studio 2010 Ultimate Edition, and with these two in combination the situation has drastically changed. At last there is a single environment that is capable of handling all aspects of ALM, and is also capable of dealing with migration and integration with existing systems to make the transition to a single solution much easier. Thse possibilities (and practicalities) are nothing short of amazing, Architecture thru Testing integration? YES. Being able to correlate specific requirement items (and their history) to actual code (and code history)? YES. Identification of which tests will be potentially impacted by a given code change? YES. Resiliant Automated Testing of User Interfaces? YES. Automatic Deployment Management? YES. Integraton Level testing as part of (designated) Builds? YES. I could easily double or triple the above list, but these items should be enough to get you thinking about the "pain points" your team and organization currently face and the fact that there IS a way to relieve the pain. Over the course of the year, I am hoping to bring together some of the "best of breed" information, along with hosting (and participating in) discussions with various experts in the field. There are already a number of groups (including many on LinkedIn) that have an ALM focus, and I encourage everyone out to check them out. I will be posting a list of the ones I find most helpful in the not too distant future. As I said at the beginning, 2011 is shaping up to be a very interesting (and productive) year. Why wait to start investigating and adopting ALM? ps: For those interested in becoming an "Alms Giver" in the charitable sense, I highly recommend checking out GiveCamp. A group of developers, designers and others get together to create a solution for a charity in just under 48 hours. I will be attending the GiveCamp in New York City on Jan 14-16, more information is available at nycgivecamp.org/

    Read the article

  • GNU/Linux interactive table content GUI editor?

    - by sdaau
    I often find myself in the need to gather data (say from the internet), into a table, for comparison reasons. I usually need the final table output in HTML or MediaWiki mostly, but often times also Latex. My biggest problem is that I often forget the correct table syntax for these markup languages, as well as what needs to be properly escaped in the inline data, for the table to render correctly. So, I often wish there was a GUI application, which provides a tabular framework - which I could stick "Always on Top" as a desktop window, and I could paste content into specific cells - before finally exporting the table as a code in the correct language. One application that partially allows this is Open/LibreOffice calc: The good thing here is that: I can drag and drop browser content into a specifically targeted table cell (here B2) "Rich" text / HTML code gets pasted For long content, the cell (column) width stays put as it originally was The bad thing is, that: when the cell height (due to content size) becomes larger than the calc window, it becomes nearly impossible to scroll calc contents up and down (at least with the mousewheel), as the view gets reset to top-right corner of the selected cell calc shows an "endless"/unlimited field of cells, so not exactly a "table" - which I find visually very confusing (and cognitively taxing) Can only export table to HTML What I would need is an application that: Allows for a limited size table, but with quick adding of rows and columns (e.g. via corresponding + buttons) Allows for quick setup of row and column height and width (as well as table size) Stays put at those sizes, regardless of size of content pasted in; if cell content overflows, cell scrollbars are shown (cell content could be possibly re-edited in a separate/new window); if table overflows over window size, window scrollbars are shown Exports table in multiple formats (I'd need both HTML and mediawiki), properly escaping cell content for each (possibility to strip HTML tags from content pasted in cells, to get plain text, is a plus) Targeting a specific cell in the table for the content paste operation is a must - it doesn't have to be drag'n'drop though, a right click over a cell with "Paste content" is enough. I'd also want the ability to click in a specific cell and type in (plain text) content immediately. So, my question is: is there an application out there that already does something like this? The reason I'm asking is that - as the screenshots show - for instance Libre/OpenOffice allows it, but only somewhat (as using it for that purpose is tedious). I know there exist some GUI editors for Linux (both for UI like guile or HTML like amaya); but I don't know them enough to pinpoint if any of them would offer this kind of functionality (and at least in my searches, that kind of functionality, if present in diverse software, seems not to be advertised). Note I'm not interested in styling an HTML table, which is why I haven't used "table designer" in the title, but "table editor" (in lack of better terms) - I'm interested in (quickly) adjusting row/column size of the table, and populating it with pasted data (which is possibly HTML) in a GUI; and finally exporting such a table as self-contained HTML (or other) code.

    Read the article

  • Why is it necessary to install EFI/rEFInd/UEFI/... on a SD Card since the Macbook Pro seems to already have it?

    - by user170794
    Dear askubuntu members, I own a Macbook Pro (late 2009) and when I boot the laptop and hold the alt key meanwhile, there is a EFI screen, so EFI is installed on... the firmware? I had a few troubles with my hard disk, so I had to change it, but I haven't installed OS X, I have only installed Ubuntu and still the EFI screen is there which is surely a good thing. As the new hard disk is making troubles again, I am using Puppy Linux, booting from a CD each time, which is unconfortable. So I am trying to have Ubuntu installed on a SD Card. After having spent many months on the internet grabing informations anywhere I can and trying several things, I applied this method: http://www.weihermueller.de/mac/ I succeeded in making one SD Card recognizable by the EFI of my laptop (holding alt key @ boot), but nothing installed on it yet as I fear to lose the recognizable-by-EFI part. I haven't succeded in producing the same result on another SD Card. I have a bootable USB key of Ubuntu (yipee) which works like a live CD, made with the help of Universal Linux UDF Creator, found there: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/ on which I have put Ubuntu 13.04 64bit, retrieved from the official deposits. Eventhough I have to add the "nouveau.noaccel=1" option to the grub command line launching Linux, it works (yipee again) properly as a live cd. When installing Ubuntu I come across the "where do I wanna put Ubuntu" window, I partition another SD Card in: the EFI part (40MB) the Linux part (15GB< <16GB) The installation works fine and finishes with no problem. But at the reboot, the SD Card where Linux is installed is not recognized by the EFI, the icons are : the CD (Puppy Linux), the USB stick (from Linux UDF Creator), the hard drive (the formerly-working Ubuntu 12) but no fourth icon of the SD Card whatsoever. As the title of this thread suggests, I am wondering: why there is a need for EFI to be installed on the SD Card since EFI seems to be on my laptop anyway? why EFI has to be on a different partition than the Linux's one? How do both parts communicate? why the EFI part on the SD Card made with the help of the live-USB key isn't recognized? on the EFI partition, there is a folder named "EFI" which contains another folder named "ubuntu" which contains a file named "grubx64.efi", why is there a thing called grub? Is it the Linux's grub where one can chose either to boot, to boot in safe mode, etc.? Thank you for your patience, looking forward for any kind of answer, Julien

    Read the article

  • JavaOne: Parleys.com, Spring Vs. Java EE and HTML5 tooling

    - by delabassee
    Parleys.com, a 2012 Duke's Choice Award winner, is an E-Learning platform that host content from different sources (conferences, JUGs meetings, etc.). There is a lot of technical content available for online but also offline consumption, including many sessions on Java EE. Parleys has just released, for free, all the Devoxx 2011 sessions (video and slides sync'ed!). From a technical point of view, Parleys.com is interesting as they have switched from Spring to Java EE 6 to avoid being locked in a proprietary framework. During the GlassFish Community BoF, Stephan Janssen (Parleys.com and Devoxx founder) also presented how GlassFish is used to support 2000 concurrent Parleys users over a cluster of 2 GlassFish instances. Talking about Java EE and/or Spring, Harshad Oak has posted an update on the 'Spring Vs. Java EE' panel discussion that took place on Tuesday. As Arun said standards such as Java EE does not necessarily refrain innovation: "JBoss Forge & Arquillian from RedHat are great examples of innovation in the JavaEE community. Standardization is important but innovation does continue even within that framework." Simplicity, productivity along with HTML5 are the driving themes of Java EE 7. In terms of simplicity and productivity, the developer experience can also be improved by the tooling. Every NetBeans release comes with a large set of improvements, the just released NetBeans 7.3 beta is no exception. The goal of ‘NB 7.3’s Project Easel’ is to improve HTML5 development, something that will be handy for Java EE 7 developers. Project Easel can, for example, communicate directly to Chrome's WebKit engine, this feature was shown during Sunday's Technical Keynote at the end of the Java EE section. In this beta release, Chrome and the embedded JavaFX browser are the only supported browsers but the NetBeans team plan to add support, over time, for other WebKit based browsers. NetBans 7.3 beta NetBeans 7.3 screenscasts Today (i.e. Wednesday 3rd) is also the final exhibition day, so make sure to visit the Java EE and the GlassFish pods on the Java DEMOgrounds (Hilton Grand Ballroom, 9:30 am - 5:00 pm). Finally, here are some Java EE and GlassFish related activities worth attending today if you are at JavaOne : Wednesday October 3rd Time Title Location 8:30-9:30am What's New in Servlet 3.1: An Overview Parc 55 Mission 8:30-9:30am Bean Validation 1.1: What's New Under the Hood Parc 55Cyril Magnin II/III 10:00-11:00am JSR 353: Java API for JSON Processing Parc 55 Mission 10:00-12:00pm Tutorial : Integrating Your Service into the GlassFish PaaS Platform Parc 55 Devisidero 11:30-12:30pm What's New in JSF: A Complete Tour of JSF 2.2 Parc 55Cyril Magnin I 11:30-12:30pm Best of Both Worlds: Java Persistence with NoSQL and SQL Parc 55 Mission 1:00-2:00pm Sharding Middleware to Achieve Elasticity and High Availability in the Cloud Parc 55Market Street 1:00-2:00pm Pimp My RESTful Java Applications Parc 55Cyril Magnin I 3:00-4:00pm Migrating Spring to Java EE Parc 55Cyril Magnin II/III 4:30-5:30pm JavaEE.Next(): Java EE 7, 8, and Beyond Parc 55Cyril Magnin II/III 4:30-5:30pm HTML5 WebSocket and Java Parc 55Cyril Magnin I 4:30-5:30pm Easy Middleware for Your Embedded Device Nikko Ballroom II/III

    Read the article

  • Oracle Manageability Presentations at Collaborate 2012

    - by Get_Specialized!
    Attending the Collaborate 2012 event, April 22-26th in Las Vegas, and interested in learning more about becoming specialized on Oracle Manageability? Be sure and checkout these sessions below presented by subject matter experts while your onsite. Set up a meeting or be one of the first Oracle Partners onsite to ask me, and we'll request one of the limited FREE Oracle Enterprise Manager 12c partner certification exam vouchers for you. Can't travel this year? the  COLLABORATE 12 Plug Into Vegas may be another option for you to attend from your own desk presentations like session #489 Oracle Enterprise Manager 12c: What's Changed? What's New? presented by Oracle Specialized Partners like ROLTA   Session ID Title Presented by Day/Time 920 Enterprise Manager 12c Cloud Control: New Features and Best Practices Dell Sun 9536 Release 12 Apps DBA 101 Justadba, LLC Mon 932 Monitoring Exadata with Cloud Control Oracle Mon 397 OEM Cloud Control Hands On Performance Tuning Mon 118 Oracle BI Sys Mgmt Best Practices & New Features Rittman Mead Consulting Mon 548 High Availability Boot Camp: RAC Design, Install, Manage Database Administration, Inc Mon 926 The Only Complete Cloud Management Solution -- Oracle Enterprise Manager Oracle Mon 328 Virtualization Boot Camp Dell Mon 292 Upgrading to Oracle Enterprise Manager 12c - Best Practices Southern Utah University Mon 793 Exadata 101 - What You Need to Know Rolta Tues 431 & 1431 Extreme Database Administration: New Features for Expert DBAs Oracle Tue Wed 521 What's New for Oracle WebLogic Management: Capabilities that Scripting Cannot Provide Oracle Thu 338 Oracle Real Application Testing: A look under the hood PayPal Tue 9398 Reduce TCO Using Oracle Application Management Suite for Oracle E-Business Suite Oracle Tue 312 Configuring and Managing a Private Cloud with Oracle Enterprise Manager 12c Dell Tue 866 Making OEM Sing and Dance with EMCLI Portland General Electric Tue 533 Oracle Exadata Monitoring: Engineered Systems Management with Oracle Enterprise Manager Oracle Wed 100600 Optimizing EnterpriseOne System Administration Oracle Wed 9565 Optimizing EBS on Exadata Centroid Systems Wed 550 Database-as-a-Service: Enterprise Cloud in Three Simple Steps Oracle Wed 434 Managing Oracle: Expert Panel on Techniques and Best Practices Oracle Partners: Dell, Keste, ROLTA, Pythian Wed 9760 Cloud Computing Directions: Understanding Oracle's Cloud AT&T Wed 817 Right Cloud: Use Oracle Technologies to Avoid False Cloud Visual Integrator Consulting Wed 163 Forgetting something? Standardize your database monitoring environment with Enterprise Manager 11g Johnson Controls Wed 489 Oracle Enterprise Manager 12c: What's Changed? What's New? ROLTA Thu    

    Read the article

  • Why is my laptop so sluggish? Or Damn You Facebook and Twitter! Or All Hail Chrome!

    - by John Conwell
    In the past three weeks, I've noticed that my laptop (dual core 2.1GHz, 2Gb RAM) has become amazingly sluggish.  I only uses for communications and data lookup workflows, so the slowness was tolerable.  But today I finally got fed up with the suckyness and decided to get to the root of the problem (I do have strong performance roots after all). It actually didn't take all that long to figure it out.  About a year ago I converted to Google Chrome (away from FireFox).  One of the great tools Chrome has is a "Task Manager" tool, that gives you Windows Task Manager like details for all the tabs open in the browser (Shift + Esc).  Since every tab runs in its own process, its easy from Task Manager (both Windows or Chrome) to identify and kill a single performance offending tab.  This is unlike IE, where you only get aggregate data about all tabs open.  Anyway, I digress.  Today my laptop sucked.  Windows Task Manager told me that I had two memory hogging Chrome tabs, but couldn't tell me which web page those tabs are showing.  Enter Chrome Task Manager which tells you the page title, along with CPU, memory and network utilization of each tab.  Enter my amazement.  Turns out Facebook was using just shy of half a Gb of RAM.  Half a Gigabyte!  That's 512 Megabytes!524,288 Kilobytes! 536,870,912 Bytes!  Or 4,294,967,296 Bits!  In other words, that's a frackin boat load of memory.  Now consider that Facebook is running on pretty much 96.3% (statistics based on absolutely nothing) of every house hold desktop, laptop, netbook, and mobile device in America, that is pretty horrific! And I wasn't playing any Facebook games like FarmWars or MafiaVille.  I just had my normal, default home page up showing me who just had breakfast, or just got finished with their morning run. I'm sorry...let me say that again...HALF A GIG OF RAM!  That is just unforgivable. I can just see my mom calling me up:  Mom: "John...I think I need a new computer.  Mine is really slow these days" John: "What do you have running?" Mom: "Oh, just Facebook" John: "Ok, close Facebook and tell me how fast your computer feels" Mom: "Well...I don't know how fast it is.  All I do is use Facebook" John: "Ok Mom, I'll send you a new computer by Tuesday" Oh yea...and the other offending web page?  It was Twitter, using a quarter of a Gigabyte. God I love social networks!

    Read the article

  • The Solution

    - by Patrick Liekhus
    So I recently attended a class about time management as well as read the book “The Seven Habits of Highly Effective People” by Stephen Covey.  Both have been instrumental in helping me get my priorities aligned as well as keep me focused. The reason I bring this up is that it gave me a great idea for a small application with which to create a great technical stack solution that would be easy to demo and explain.  Therefore, the project from this point forward with be the Liekhus.TimeTracker application which will bring some the time management skills that I have acquired into a technical implementation.  The idea is rather simple, but leverages some of the basic principles of Covey along with some of the worksheets that I garnered from class.  The basics are as such: 1) a plan is a must have and 2) write it down!  A plan not written down is just an idea.  How many times have you had an idea that didn’t materialize?  Exactly.  Hence why I am writing it all down now! The worksheet consists of a few simple columns that I will outline below as well as some modifications that I made according to the Covey habits.  The worksheet looks like the following: Status Issue Area CQ Notes P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   The idea is really simple and straightforward; you write down all your tasks and keep track of them along the way.  The status stands for (P)ending, (F)inished or (L)ater.  You write a quick title for the issue and select the CQ (Covey Quadrant) with which the issue occurs.  The notes section is for things that happen while you are working through the issue.  And last, but not least, is the Area column that I added as a way to identify the Role or Area of your life that this task falls within based upon Covey’s teachings. The second part of this application is a simple phone log that allows you to track your phone conversations throughout the day.  All of this is currently done on a sheet of paper, but being involved in technology, I want it to have bells and whistles.  Therefore, this is my simple idea for a project that will allow me to test my theories about coding and implementations.  Stay tuned as the next session will be flushing out the concept and coming up with user stories to begin the SCRUM process. Thanks

    Read the article

  • I owe you an explanation

    - by Blueberry Coder
    Welcome to my blog! I am Frédéric Desbiens, a new member of the ADF Product Management team.  I joined Oracle only a few weeks ago. My boss is Grant Ronald, and I have the privilege to work in the same team as Susan Duncan, Frank Nimphius, Lynn Munsinger and Chris Muir. I share with them a passion for all things Java and ADF. With this blog, I hope to help you be more successful with our products – whether you are a customer or a partner. You may have heard of me before. Maybe you have my book in your bookshelf; or maybe we met at a conference. I went to JavaOne, ODTUG Kaleidoscope and Oracle OpenWorld in the past, when I worked for a major consulting firm. I will spare you all the details of my career; you can have a look at my LinkedIn profile if you are curious about my past.  Usually, my posts will be of a technical nature, and will focus on Oracle ADF and Oracle JDeveloper. SOA and portals have always been two topics of interest for me, however, and I will write about them. Over time, you will probably get acquainted with my « strategic » side as well. I devour history books, and always had a tendency to look at the big picture. I will probably not resist to the temptation of mixing IT and history, but this will be occasional, I promise!  At this point, I owe you an explanation about the title of the blog. I am French-Canadian, and wanted to evoke my roots in an obvious yet unobtrusive way. I was born in Chicoutimi, which is one of the main cities found in the Saguenay-Lac-Saint-Jean region. Traditionally, a large part of the wild blueberry production of the province of Québec come from there. A common nickname for the inhabitants is thus Les Bleuets, « The Blueberries » in English. I hope to see you around. You can also follow me on Twitter under  @BlueberryCoder.

    Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >