local administrator - Page 339

Some PowerShell goodness

- by KyleBurns

Ever work somewhere where processes dump files into folders to maintain an archive? Me too and Windows Explorer hates it. Very often I find myself needing to organize these files into subfolders so that I can go after files without locking up Windows Explorer and my answer used to be to write a program in something like C# to do the job. These programs will typically enumerate the files in a folder and move each file to a subdirectory named based on a datestamp. The last such program I wrote had to use lower-level Win32 API calls to perform the enumeration because it appears the standard .Net calls make use of the same method of enumerating the directories that Windows Explorer chokes on when dealing with a large number of entries in a particular directory, so a simple task was accomplished with a lot of code. Of course, this little utility was just something I used to make my life easier and "not a production app", so it was in my local source folder and not source control when my hard drive died. So... I was getting ready to re-create it and thought it might be a good idea to play with PowerShell a bit - something I had been wanting to do but had not yet met a requirement to make me do it. The resulting script was amazingly succinct and even building the flexibility for parameterization and adding line breaks for readability was only about 25 lines long. Here's the code with discussion following: param( [Parameter( Mandatory = $false, Position = 0, HelpMessage = "Root of the folders or share to archive. Be sure to end with appropriate path separator" )] [String] $folderRoot="\\fileServer\pathToFolderWithLotsOfFiles\", [Parameter( Mandatory = $false, Position = 1 )] [int] $days = 1 ) dir $folderRoot|?{(!($_.PsIsContainer)) -and ((get-date) - $_.lastwritetime).totaldays -gt $days }|%{ [string]$year=$([string]$_.lastwritetime.year) [string]$month=$_.lastwritetime.month [string]$day=$_.lastwritetime.day $dir=$folderRoot+$year+"\"+$month+"\"+$day if(!(test-path $dir)){ new-item -type container $dir } Write-output $_ move-item $_.fullname $dir } The script starts by declaring two parameters. The first parameter holds the path to the folder that I am going to be sorting into subdirectories. The path separator is intended to be included in this argument because I didn't want to mess with determining whether this was local or UNC and picking the right separator in code, but this could be easily improved upon using Path.Combine since PowerShell has access to the full framework libraries. The second parameter holds a minimum age in days for files to be removed from the root folder. The script then pipes the dir command through a query to include only files (by excluding containers) and of those, only entries that meet the age requirement based on the last modified datestamp. For each of those, the datestamp is used to construct a folder name in the format YYYY\MM\DD (if you're in an environment where even a day's worth of files need further divided, you could make this more granular) and the folder is created if it does not yet exist. Finally, the file is moved into the directory. One of the things that was really cool about using PowerShell for this task is that the new-item command is smart enough to create the entire subdirectory structure with a single call. In previous code that I have written to do this kind of thing, I would have to test the entire tree leading down to the subfolder I want, leading to a lot of branching code that detracted from being able to quickly look at the code and understand the job it performs. Overall, I have to say I'm really pleased with what has been done making PowerShell powerful and useful.

Read the article

"The connection has timed out" - Please help!

- by gon

I recently installed a fresh Ubuntu 12.04 LTS on a desktop, and the installation itself was successful (other than 'grub rescue' issue that I encountered but fixed) but this connection problem is really giving me a headache. Symptoms: 1. When I open the FireFox browser and try to connect to a website, it just hangs for a while saying "Connecting..." but eventually loads an error page "The connection has timed out". 2. It's not a browser problem (and I tried setting ipv6 thing to "true" at about:config) because running "sudo apt-get install [some-random-package]" at terminal fails ("E: Unable to locate package [package]") too. All other operations that need internet access are not working. 3. I certainly see a wired network (called "eth1") at the Network Manager, and it says "Connection Established" after disconnecting and then connecting again. I have tried almost everything that could be found from google search results still no luck. Their problems slightly differ from mine or the solutions just don't work. By the way it didn't have internet access when installing Ubuntu 12.04. (I ignored the message that I need internet to install Ubuntu) Could this be a problem? I'm sorry I don't remember if internet worked or not on the previous version of Ubuntu. :( I would really appreciate your help... I don't even know what more to do if this fails too.. Thanks!! Thanks for your comment. Here is the result of ifconfig: eth0 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b9 inet addr:10.10.65.185 Bcast:10.10.65.255 Mask:255.255.255.0 inet6 addr: fe80::7aac:c0ff:fe3d:b2b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3907 errors:0 dropped:0 overruns:0 frame:0 TX packets:771 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:393118 (393.1 KB) TX bytes:73472 (73.4 KB) Interrupt:16 eth1 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204 (204.0 B) TX bytes:204 (204.0 B) route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.10.65.1 0.0.0.0 UG 0 0 0 eth0 10.10.65.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 /etc/resolv.conf: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 8.8.8.8 nameserver 8.8.4.4 nameserver 10.81.1.8 nameserver 10.1.2.10 nameserver 127.0.0.1 search yamatake.local /etc/network/interfaces: auto lo iface lo inet loopback #auto eth0 #iface eth0 inet dhcp #auto eth1 #iface eth1 inet dhcp And I'll also include the result of 'sudo lshw -C network' in case it might help: *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 78:ac:c0:3d:b2:b9 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 ip=10.10.65.185 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:93 memory:fc000000-fc00ffff *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth1 version: 10 serial: 78:ac:c0:3d:b2:b8 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s resources: irq:94 memory:fb000000-fb00ffff

Read the article

Using Private Extension Galleries in Visual Studio 2012

- by Jakob Ehn

Note: The installer and the complete source code is available over at CodePlex at the following location: http://inmetavsgallery.codeplex.com Extensions and addins are everywhere in the Visual Studio ALM ecosystem! Microsoft releases new cool features in the form of extensions and the list of 3rd party extensions that plug into Visual Studio just keeps growing. One of the nice things about the VSIX extensions is how they are deployed. Microsoft hosts a public Visual Studio Gallery where you can upload extensions and make them available to the rest of the community. Visual Studio checks for updates to the installed extensions when you start Visual Studio, and installing/updating the extensions is fast since it is only a matter of extracting the files within the VSIX package to the local extension folder. But for custom, enterprise-specific extensions, you don’t want to publish them online to the whole world, but you still want an easy way to distribute them to your developers and partners. This is where Private Extension Galleries come into play. In Visual Studio 2012, it is now possible to add custom extensions galleries that can point to any URL, as long as that URL returns the expected content of course (see below).Registering a new gallery in Visual Studio is easy, but there is very little documentation on how to actually host the gallery. Visual Studio galleries uses Atom Feed XML as the protocol for delivering new and updated versions of the extensions. This MSDN page describes how to create a static XML file that returns the information about your extensions. This approach works, but require manual updates of that file every time you want to deploy an update of the extension. Wouldn’t it be nice with a web service that takes care of this for you, that just lets you drop a new version of your VSIX file and have it automatically detect the new version and produce the correct Atom Feed XML? Well search no more, this is exactly what the Inmeta Visual Studio Gallery Service does for you :-) Here you can see that in addition to the standard Online galleries there is an Inmeta Gallery that contains two extensions (our WIX templates and our custom TFS Checkin Policies). These can be installed/updated i the same way as extensions from the public Visual Studio Gallery. Installing the Service Download the installler (Inmeta.VSGalleryService.Install.msi) for the service and run it. The installation is straight forward, just select web site, application pool and (optional) a virtual directory where you want to install the service. Note: If you want to run it in the web site root, just leave the application name blank Press Next and finish the installer. Open web.config in a text editor and locate the the <applicationSettings> element Edit the following setting values: FeedTitle This is the name that is shown if you browse to the service using a browser. Not used by Visual Studio BaseURI When Visual Studio downloads the extension, it will be given this URI + the name of the extension that you selected. This value should be on the following format: http://SERVER/[VDIR]/gallery/extension/ VSIXAbsolutePath This is the path where you will deploy your extensions. This can be a local folder or a remote share. You just need to make sure that the application pool identity account has read permissions in this folder Save web.config to finish the installation Open a browser and enter the URL to the service. It should show an empty Feed page: Adding the Private Gallery in Visual Studio 2012 Now you need to add the gallery in Visual Studio. This is very easy and is done as follows: Go to Tools –> Options and select Environment –> Extensions and Updates Press Add to add a new gallery Enter a descriptive name, and add the URL that points to the web site/virtual directory where you installed the service in the previous step Press OK to save the settings. Deploying an Extension This one is easy: Just drop the file in the designated folder! :-) If it is a new version of an existing extension, the developers will be notified in the same way as for extensions from the public Visual Studio gallery: I hope that you will find this sever useful, please contact me if you have questions or suggestions for improvements!

Read the article

??GoldenGate?LAG???

- by Liu Maclean(???)

GGSCI????LAG?? ????????????????Oracle?redo????online redo logfile? ? Replicat????????????????? ???????? ????,?????????????????LAG; ????????????????REPLICAT??apply???????????? OGG????RANGE??????????,????????REPLICATE??APPLY? OGG??MAXTRANSOPS???????? LAG?????????: ?Extract?????redolog????TRAIL?REMOTE HOST ????datapump???extract trail????????????REMOTE HOST ?collector?????????????????LOCAL TRAIL ?REPLICAT??LOCAL TRAIL???????? ?????????GGSCI?INFO?STATUS??????LAG,???SEND ???,LAG?????LAG?????: INFO??????LAG???SEND??????????? INFO?????LAG???MANAGER????????checkpoint SEND <OBJECT>, lag???LAG???<OBJECT>???????????? LAG?????????????????Kilobytes??? ????LAG??? ????????????? ? EXTRACT/PUMP/REPLICAT???????? ?2?????????, ???? LAG???EXTRACT??????? ??EXTRACT/PUMP/REPLICAT??????????????? REAL TIME,???LAG????? ?????????????? ????????REDO LOG?????????,?LAG???ER???????,?????????????? ??????,STOP EXTRACT?????????????????LAG,????EXTRACT?????,??EXTRACT????????? ????REDO LOG???? ?EXTRACT??????????????????? GGSCI (XIANGBLI-CN) 27> stop load2 Sending STOP request to EXTRACT LOAD2 … Request processed. GGSCI (XIANGBLI-CN) 28> start load2 Sending START request to MANAGER … EXTRACT LOAD2 starting GGSCI (XIANGBLI-CN) 31> info load2 EXTRACT LOAD2 Last Started 2012-09-18 20:26 Status RUNNING Checkpoint Lag 00:04:34 (updated 00:00:08 ago) Log Read Checkpoint Oracle Redo Logs 2012-09-18 20:21:32 Seqno 44, RBA 13750272 SCN 0.1845479 (1845479) GGSCI (XIANGBLI-CN) 35> lag load2 Sending GETLAG request to EXTRACT LOAD2 … Last record lag: 130 seconds. At EOF, no more records to process. GGSCI (XIANGBLI-CN) 36> info load2 EXTRACT LOAD2 Last Started 2012-09-18 20:26 Status RUNNING Checkpoint Lag 00:00:00 (updated 00:00:02 ago) Log Read Checkpoint Oracle Redo Logs 2012-09-18 20:27:33 Seqno 44, RBA 13817856 SCN 0.1845671 (1845671) ?????? Last record lag ? Checkpoint Lag ???? EXTRACT/PUMP/REPLICAT ?????????????(catch up), ???? ?????????????GB?redo???,??????EXTRACT/PUMP/REPLICAT ????????? ???INFO?LAG???checkpoint?,????????????Long Running Transactions (LRTs),??????????COMMIT? ????????????????????????COMMIT?????? ????EXTRACT/PUMP/REPLICAT???????????????????????commit????? ??REPLICAT????MAXTRANSOPS ?????LAG?

Read the article

Loading jQuery Consistently in a .NET Web App

- by Rick Strahl

One thing that frequently comes up in discussions when using jQuery is how to best load the jQuery library (as well as other commonly used and updated libraries) in a Web application. Specifically the issue is the one of versioning and making sure that you can easily update and switch versions of script files with application wide settings in one place and having your script usage reflect those settings in the entire application on all pages that use the script. Although I use jQuery as an example here, the same concepts can be applied to any script library - for example in my Web libraries I use the same approach for jQuery.ui and my own internal jQuery support library. The concepts used here can be applied both in WebForms and MVC. Loading jQuery Properly From CDN Before we look at a generic way to load jQuery via some server logic, let me first point out my preferred way to embed jQuery into the page. I use the Google CDN to load jQuery and then use a fallback URL to handle the offline or no Internet connection scenario. Why use a CDN? CDN links tend to be loaded more quickly since they are very likely to be cached in user's browsers already as jQuery CDN is used by many, many sites on the Web. Using a CDN also removes load from your Web server and puts the load bearing on the CDN provider - in this case Google - rather than on your Web site. On the downside, CDN links gives the provider (Google, Microsoft) yet another way to track users through their Web usage. Here's how I use jQuery CDN plus a fallback link on my WebLog for example: <!DOCTYPE HTML> <html> <head> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script> <script> if (typeof (jQuery) == 'undefined') document.write(unescape("%3Cscript " + "src='/Weblog/wwSC.axd?r=Westwind.Web.Controls.Resources.jquery.js' %3E%3C/script%3E")); </script> <title>Rick Strahl's Web Log</title> ... </head> You can see that the CDN is referenced first, followed by a small script block that checks to see whether jQuery was loaded (jQuery object exists). If it didn't load another script reference is added to the document dynamically pointing to a backup URL. In this case my backup URL points at a WebResource in my Westwind.Web assembly, but the URL can also be local script like src="/scripts/jquery.min.js". Important: Use the proper Protocol/Scheme for for CDN Urls [updated based on comments] If you're using a CDN to load an external script resource you should always make sure that the script is loaded with the same protocol as the parent page to avoid mixed content warnings by the browser. You don't want to load a script link to an http:// resource when you're on an https:// page. The easiest way to use this is by using a protocol relative URL: <script src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script> which is an easy way to load resources from other domains. This URL syntax will automatically use the parent page's protocol (or more correctly scheme). As long as the remote domains support both http:// and https:// access this should work. BTW this also works in CSS (with some limitations) and links. BTW, I didn't know about this until it was pointed out in the comments. This is a very useful feature for many things - ah the benefits of my blog to myself :-) Version Numbers When you use a CDN you notice that you have to reference a specific version of jQuery. When using local files you may not have to do this as you can rename your private copy of jQuery.js, but for CDN the references are always versioned. The version number is of course very important to ensure you getting the version you have tested with, but it's also important to the provider because it ensures that cached content is always correct. If an existing file was updated the updates might take a very long time to get past the locally cached content and won't refresh properly. The version number ensures you get the right version and not some cached content that has been changed but not updated in your cache. On the other hand version numbers also mean that once you decide to use a new version of the script you now have to change all your script references in your pages. Depending on whether you use some sort of master/layout page or not this may or may not be easy in your application. Even if you do use master/layout pages, chances are that you probably have a few of them and at the very least all of those have to be updated for the scripts. If you use individual pages for all content this issue then spreads to all of your pages. Search and Replace in Files will do the trick, but it's still something that's easy to forget and worry about. Personaly I think it makes sense to have a single place where you can specify common script libraries that you want to load and more importantly which versions thereof and where they are loaded from. Loading Scripts via Server Code Script loading has always been important to me and as long as I can remember I've always built some custom script loading routines into my Web frameworks. WebForms makes this fairly easy because it has a reasonably useful script manager (ClientScriptManager and the ScriptManager) which allow injecting script into the page easily from anywhere in the Page cycle. What's nice about these components is that they allow scripts to be injected by controls so components can wrap up complex script/resource dependencies more easily without having to require long lists of CSS/Scripts/Image includes. In MVC or pure script driven applications like Razor WebPages the process is more raw, requiring you to embed script references in the right place. But its also more immediate - it lets you know exactly which versions of scripts to use because you have to manually embed them. In WebForms with different controls loading resources this often can get confusing because it's quite possible to load multiple versions of the same script library into a page, the results of which are less than optimal… In this post I look a simple routine that embeds jQuery into the page based on a few application wide configuration settings. It returns only a string of the script tags that can be manually embedded into a Page template. It's a small function that merely a string of the script tags shown at the begging of this post along with some options on how that string is comprised. You'll be able to specify in one place which version loads and then all places where the help function is used will automatically reflect this selection. Options allow specification of the jQuery CDN Url, the fallback Url and where jQuery should be loaded from (script folder, Resource or CDN in my case). While this is specific to jQuery you can apply this to other resources as well. For example I use a similar approach with jQuery.ui as well using practically the same semantics. Providing Resources in ControlResources In my Westwind.Web Web utility library I have a class called ControlResources which is responsible for holding resource Urls, resource IDs and string contants that reference those resource IDs. The library also provides a few helper methods for loading common scriptscripts into a Web page. There are specific versions for WebForms which use the ClientScriptManager/ScriptManager and script link methods that can be used in any .NET technology that can embed an expression into the output template (or code for that matter). The ControlResources class contains mostly static content - references to resources mostly. But it also contains a few static properties that configure script loading: A Script LoadMode (CDN, Resource, or script url) A default CDN Url A fallback url They are static properties in the ControlResources class: public class ControlResources { /// <summary> /// Determines what location jQuery is loaded from /// </summary> public static JQueryLoadModes jQueryLoadMode = JQueryLoadModes.ContentDeliveryNetwork; /// <summary> /// jQuery CDN Url on Google /// </summary> public static string jQueryCdnUrl = "//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"; /// <summary> /// jQuery CDN Url on Google /// </summary> public static string jQueryUiCdnUrl = "//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.min.js"; /// <summary> /// jQuery UI fallback Url if CDN is unavailable or WebResource is used /// Note: The file needs to exist and hold the minimized version of jQuery ui /// </summary> public static string jQueryUiLocalFallbackUrl = "~/scripts/jquery-ui.min.js"; } These static properties are fixed values that can be changed at application startup to reflect your preferences. Since they're static they are application wide settings and respected across the entire Web application running. It's best to set these default in Application_Init or similar startup code if you need to change them for your application: protected void Application_Start(object sender, EventArgs e) { // Force jQuery to be loaded off Google Content Network ControlResources.jQueryLoadMode = JQueryLoadModes.ContentDeliveryNetwork; // Allow overriding of the Cdn url ControlResources.jQueryCdnUrl = "http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js"; // Route to our own internal handler App.OnApplicationStart(); } With these basic settings in place you can then embed expressions into a page easily. In WebForms use: <!DOCTYPE html> <html> <head runat="server"> <%= ControlResources.jQueryLink() %> <script src="scripts/ww.jquery.min.js"></script> </head> In Razor use: <!DOCTYPE html> <html> <head> @Html.Raw(ControlResources.jQueryLink()) <script src="scripts/ww.jquery.min.js"></script> </head> Note that in Razor you need to use @Html.Raw() to force the string NOT to escape. Razor by default escapes string results and this ensures that the HTML content is properly expanded as raw HTML text. Both the WebForms and Razor output produce: <!DOCTYPE html> <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js" type="text/javascript"></script> <script type="text/javascript"> if (typeof (jQuery) == 'undefined') document.write(unescape("%3Cscript src='/WestWindWebToolkitWeb/WebResource.axd?d=-b6oWzgbpGb8uTaHDrCMv59VSmGhilZP5_T_B8anpGx7X-PmW_1eu1KoHDvox-XHqA1EEb-Tl2YAP3bBeebGN65tv-7-yAimtG4ZnoWH633pExpJor8Qp1aKbk-KQWSoNfRC7rQJHXVP4tC0reYzVw2&t=634535391996872492' type='text/javascript'%3E%3C/script%3E"));</script> <script src="scripts/ww.jquery.min.js"></script> </head> which produces the desired effect for both CDN load and fallback URL. The implementation of jQueryLink is pretty basic of course: /// <summary> /// Inserts a script link to load jQuery into the page based on the jQueryLoadModes settings /// of this class. Default load is by CDN plus WebResource fallback /// </summary> /// <param name="url"> /// An optional explicit URL to load jQuery from. Url is resolved. /// When specified no fallback is applied /// </param> /// <returns>full script tag and fallback script for jQuery to load</returns> public static string jQueryLink(JQueryLoadModes jQueryLoadMode = JQueryLoadModes.Default, string url = null) { string jQueryUrl = string.Empty; string fallbackScript = string.Empty; if (jQueryLoadMode == JQueryLoadModes.Default) jQueryLoadMode = ControlResources.jQueryLoadMode; if (!string.IsNullOrEmpty(url)) jQueryUrl = WebUtils.ResolveUrl(url); else if (jQueryLoadMode == JQueryLoadModes.WebResource) { Page page = new Page(); jQueryUrl = page.ClientScript.GetWebResourceUrl(typeof(ControlResources), ControlResources.JQUERY_SCRIPT_RESOURCE); } else if (jQueryLoadMode == JQueryLoadModes.ContentDeliveryNetwork) { jQueryUrl = ControlResources.jQueryCdnUrl; if (!string.IsNullOrEmpty(jQueryCdnUrl)) { // check if jquery loaded - if it didn't we're not online and use WebResource fallbackScript = @"<script type=""text/javascript"">if (typeof(jQuery) == 'undefined') document.write(unescape(""%3Cscript src='{0}' type='text/javascript'%3E%3C/script%3E""));</script>"; fallbackScript = string.Format(fallbackScript, WebUtils.ResolveUrl(ControlResources.jQueryCdnFallbackUrl)); } } string output = "<script src=\"" + jQueryUrl + "\" type=\"text/javascript\"></script>"; // add in the CDN fallback script code if (!string.IsNullOrEmpty(fallbackScript)) output += "\r\n" + fallbackScript + "\r\n"; return output; } There's one dependency here on WebUtils.ResolveUrl() which resolves Urls without access to a Page/Control (another one of those features that should be in the runtime, not in the WebForms or MVC engine). You can see there's only a little bit of logic in this code that deals with potentially different load modes. I can load scripts from a Url, WebResources or - my preferred way - from CDN. Based on the static settings the scripts to embed are composed to be returned as simple string <script> tag(s). I find this extremely useful especially when I'm not connected to the internet so that I can quickly swap in a local jQuery resource instead of loading from CDN. While CDN loading with the fallback works it can be a bit slow as the CDN is probed first before the fallback kicks in. Switching quickly in one place makes this trivial. It also makes it very easy once a new version of jQuery rolls around to move up to the new version and ensure that all pages are using the new version immediately. I'm not trying to make this out as 'the' definite way to load your resources, but rather provide it here as a pointer so you can maybe apply your own logic to determine where scripts come from and how they load. You could even automate this some more by using configuration settings or reading the locations/preferences out of some sort of data/metadata store that can be dynamically updated instead via recompilation. FWIW, I use a very similar approach for loading jQuery UI and my own ww.jquery library - the same concept can be applied to any kind of script you might be loading from different locations. Hopefully some of you find this a useful addition to your toolset. Resources Google CDN for jQuery Full ControlResources Source Code ControlResource Documentation Westwind.Web NuGet This method is part of the Westwind.Web library of the West Wind Web Toolkit or you can grab the Web library from NuGet and add to your Visual Studio project. This package includes a host of Web related utilities and script support features. © Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET jQuery Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

How to call a WCF service using ksoap2 on android?

- by Qing

Hi all, Here is my code import org.ksoap2.*; import org.ksoap2.serialization.*; import org.ksoap2.transport.*; import android.app.Activity; import android.os.Bundle; import android.widget.TextView; public class ksop2test extends Activity { /** Called when the activity is first created. */ private static final String METHOD_NAME = "SayHello"; // private static final String METHOD_NAME = "HelloWorld"; private static final String NAMESPACE = "http://tempuri.org"; // private static final String NAMESPACE = "http://tempuri.org"; private static final String URL = "http://192.168.0.2:8080/HelloWCF/Service1.svc"; // private static final String URL = "http://192.168.0.2:8080/webservice1/Service1.asmx"; final String SOAP_ACTION = "http://tempuri.org/IService1/SayHello"; // final String SOAP_ACTION = "http://tempuri.org/HelloWorld"; TextView tv; StringBuilder sb; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); tv = new TextView(this); sb = new StringBuilder(); call(); tv.setText(sb.toString()); setContentView(tv); } public void call() { try { SoapObject request = new SoapObject(NAMESPACE, METHOD_NAME); request.addProperty("name", "Qing"); SoapSerializationEnvelope envelope = new SoapSerializationEnvelope( SoapEnvelope.VER11); envelope.dotNet = true; envelope.setOutputSoapObject(request); HttpTransportSE androidHttpTransport = new HttpTransportSE(URL); androidHttpTransport.call(SOAP_ACTION, envelope); sb.append(envelope.toString() + "\n");//cannot get the xml request send SoapPrimitive result = (SoapPrimitive)envelope.getResponse(); //to get the data String resultData = result.toString(); // 0 is the first object of data sb.append(resultData + "\n"); } catch (Exception e) { sb.append("Error:\n" + e.getMessage() + "\n"); } } } I can successfully access .asmx service, but when I try to call a wcf service the virtual machine said : Error: expected:END_TAG{http://schemas.xmlsoap.org/soap/envelope/}Body(position:END_TAG@1:712 in java.io.InputStreamReader@43ba6798 How to print what the request send? Here is the wcf wsdl: <wsdl:definitions name="Service1" targetNamespace="http://tempuri.org/"> - <wsdl:types> - <xsd:schema targetNamespace="http://tempuri.org/Imports"> <xsd:import schemaLocation="http://para-bj.para.local:8080/HelloWCF/Service1.svc?xsd=xsd0" namespace="http://tempuri.org/"/> <xsd:import schemaLocation="http://para-bj.para.local:8080/HelloWCF/Service1.svc?xsd=xsd1" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/> </xsd:schema> </wsdl:types> - <wsdl:message name="IService1_SayHello_InputMessage"> <wsdl:part name="parameters" element="tns:SayHello"/> </wsdl:message> - <wsdl:message name="IService1_SayHello_OutputMessage"> <wsdl:part name="parameters" element="tns:SayHelloResponse"/> </wsdl:message> - <wsdl:portType name="IService1"> - <wsdl:operation name="SayHello"> <wsdl:input wsaw:Action="http://tempuri.org/IService1/SayHello" message="tns:IService1_SayHello_InputMessage"/> <wsdl:output wsaw:Action="http://tempuri.org/IService1/SayHelloResponse" message="tns:IService1_SayHello_OutputMessage"/> </wsdl:operation> </wsdl:portType> - <wsdl:binding name="BasicHttpBinding_IService1" type="tns:IService1"> <soap:binding transport="http://schemas.xmlsoap.org/soap/http"/> - <wsdl:operation name="SayHello"> <soap:operation soapAction="http://tempuri.org/IService1/SayHello" style="document"/> - <wsdl:input> <soap:body use="literal"/> </wsdl:input> - <wsdl:output> <soap:body use="literal"/> </wsdl:output> </wsdl:operation> </wsdl:binding> - <wsdl:service name="Service1"> - <wsdl:port name="BasicHttpBinding_IService1" binding="tns:BasicHttpBinding_IService1"> <soap:address location="http://para-bj.para.local:8080/HelloWCF/Service1.svc"/> </wsdl:port> </wsdl:service> </wsdl:definitions> It uses in tag and the asmx uses in tag what's the difference? Thanks. -Qing

Read the article

Hosting the Razor Engine for Templating in Non-Web Applications

- by Rick Strahl

Microsoft’s new Razor HTML Rendering Engine that is currently shipping with ASP.NET MVC previews can be used outside of ASP.NET. Razor is an alternative view engine that can be used instead of the ASP.NET Page engine that currently works with ASP.NET WebForms and MVC. It provides a simpler and more readable markup syntax and is much more light weight in terms of functionality than the full blown WebForms Page engine, focusing only on features that are more along the lines of a pure view engine (or classic ASP!) with focus on expression and code rendering rather than a complex control/object model. Like the Page engine though, the parser understands .NET code syntax which can be embedded into templates, and behind the scenes the engine compiles markup and script code into an executing piece of .NET code in an assembly. Although it ships as part of the ASP.NET MVC and WebMatrix the Razor Engine itself is not directly dependent on ASP.NET or IIS or HTTP in any way. And although there are some markup and rendering features that are optimized for HTML based output generation, Razor is essentially a free standing template engine. And what’s really nice is that unlike the ASP.NET Runtime, Razor is fairly easy to host inside of your own non-Web applications to provide templating functionality. Templating in non-Web Applications? Yes please! So why might you host a template engine in your non-Web application? Template rendering is useful in many places and I have a number of applications that make heavy use of it. One of my applications – West Wind Html Help Builder - exclusively uses template based rendering to merge user supplied help text content into customizable and executable HTML markup templates that provide HTML output for CHM style HTML Help. This is an older product and it’s not actually using .NET at the moment – and this is one reason I’m looking at Razor for script hosting at the moment. For a few .NET applications though I’ve actually used the ASP.NET Runtime hosting to provide templating and mail merge style functionality and while that works reasonably well it’s a very heavy handed approach. It’s very resource intensive and has potential issues with versioning in various different versions of .NET. The generic implementation I created in the article above requires a lot of fix up to mimic an HTTP request in a non-HTTP environment and there are a lot of little things that have to happen to ensure that the ASP.NET runtime works properly most of it having nothing to do with the templating aspect but just satisfying ASP.NET’s requirements. The Razor Engine on the other hand is fairly light weight and completely decoupled from the ASP.NET runtime and the HTTP processing. Rather it’s a pure template engine whose sole purpose is to render text templates. Hosting this engine in your own applications can be accomplished with a reasonable amount of code (actually just a few lines with the tools I’m about to describe) and without having to fake HTTP requests. It’s also much lighter on resource usage and you can easily attach custom properties to your base template implementation to easily pass context from the parent application into templates all of which was rather complicated with ASP.NET runtime hosting. Installing the Razor Template Engine You can get Razor as part of the MVC 3 (RC and later) or Web Matrix. Both are available as downloadable components from the Web Platform Installer Version 3.0 (!important – V2 doesn’t show these components). If you already have that version of the WPI installed just fire it up. You can get the latest version of the Web Platform Installer from here: http://www.microsoft.com/web/gallery/install.aspx Once the platform Installer 3.0 is installed install either MVC 3 or ASP.NET Web Pages. Once installed you’ll find a System.Web.Razor assembly in C:\Program Files\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\Assemblies\System.Web.Razor.dll which you can add as a reference to your project. Creating a Wrapper The basic Razor Hosting API is pretty simple and you can host Razor with a (large-ish) handful of lines of code. I’ll show the basics of it later in this article. However, if you want to customize the rendering and handle assembly and namespace includes for the markup as well as deal with text and file inputs as well as forcing Razor to run in a separate AppDomain so you can unload the code-generated assemblies and deal with assembly caching for re-used templates little more work is required to create something that is more easily reusable. For this reason I created a Razor Hosting wrapper project that combines a bunch of this functionality into an easy to use hosting class, a hosting factory that can load the engine in a separate AppDomain and a couple of hosting containers that provided folder based and string based caching for templates for an easily embeddable and reusable engine with easy to use syntax. If you just want the code and play with the samples and source go grab the latest code from the Subversion Repository at: http://www.west-wind.com:8080/svn/articles/trunk/RazorHosting/ or a snapshot from: http://www.west-wind.com/files/tools/RazorHosting.zip Getting Started Before I get into how hosting with Razor works, let’s take a look at how you can get up and running quickly with the wrapper classes provided. It only takes a few lines of code. The easiest way to use these Razor Hosting Wrappers is to use one of the two HostContainers provided. One is for hosting Razor scripts in a directory and rendering them as relative paths from these script files on disk. The other HostContainer serves razor scripts from string templates… Let’s start with a very simple template that displays some simple expressions, some code blocks and demonstrates rendering some data from contextual data that you pass to the template in the form of a ‘context’. Here’s a simple Razor template: @using System.Reflection Hello @Context.FirstName! Your entry was entered on: @Context.Entered @{ // Code block: Update the host Windows Form passed in through the context Context.WinForm.Text = "Hello World from Razor at " + DateTime.Now.ToString(); } AppDomain Id: @AppDomain.CurrentDomain.FriendlyName Assembly: @Assembly.GetExecutingAssembly().FullName Code based output: @{ // Write output with Response object from code string output = string.Empty; for (int i = 0; i < 10; i++) { output += i.ToString() + " "; } Response.Write(output); } Pretty easy to see what’s going on here. The only unusual thing in this code is the Context object which is an arbitrary object I’m passing from the host to the template by way of the template base class. I’m also displaying the current AppDomain and the executing Assembly name so you can see how compiling and running a template actually loads up new assemblies. Also note that as part of my context I’m passing a reference to the current Windows Form down to the template and changing the title from within the script. It’s a silly example, but it demonstrates two-way communication between host and template and back which can be very powerful. The easiest way to quickly render this template is to use the RazorEngine<TTemplateBase> class. The generic parameter specifies a template base class type that is used by Razor internally to generate the class it generates from a template. The default implementation provided in my RazorHosting wrapper is RazorTemplateBase. Here’s a simple one that renders from a string and outputs a string: var engine = new RazorEngine<RazorTemplateBase>(); // we can pass any object as context - here create a custom context var context = new CustomContext() { WinForm = this, FirstName = "Rick", Entered = DateTime.Now.AddDays(-10) }; string output = engine.RenderTemplate(this.txtSource.Text new string[] { "System.Windows.Forms.dll" }, context); if (output == null) this.txtResult.Text = "*** ERROR:\r\n" + engine.ErrorMessage; else this.txtResult.Text = output; Simple enough. This code renders a template from a string input and returns a result back as a string. It creates a custom context and passes that to the template which can then access the Context’s properties. Note that anything passed as ‘context’ must be serializable (or MarshalByRefObject) – otherwise you get an exception when passing the reference over AppDomain boundaries (discussed later). Passing a context is optional, but is a key feature in being able to share data between the host application and the template. Note that we use the Context object to access FirstName, Entered and even the host Windows Form object which is used in the template to change the Window caption from within the script! In the code above all the work happens in the RenderTemplate method which provide a variety of overloads to read and write to and from strings, files and TextReaders/Writers. Here’s another example that renders from a file input using a TextReader: using (reader = new StreamReader("templates\\simple.csHtml", true)) { result = host.RenderTemplate(reader, new string[] { "System.Windows.Forms.dll" }, this.CustomContext); } RenderTemplate() is fairly high level and it handles loading of the runtime, compiling into an assembly and rendering of the template. If you want more control you can use the lower level methods to control each step of the way which is important for the HostContainers I’ll discuss later. Basically for those scenarios you want to separate out loading of the engine, compiling into an assembly and then rendering the template from the assembly. Why? So we can keep assemblies cached. In the code above a new assembly is created for each template rendered which is inefficient and uses up resources. Depending on the size of your templates and how often you fire them you can chew through memory very quickly. This slighter lower level approach is only a couple of extra steps: // we can pass any object as context - here create a custom context var context = new CustomContext() { WinForm = this, FirstName = "Rick", Entered = DateTime.Now.AddDays(-10) }; var engine = new RazorEngine<RazorTemplateBase>(); string assId = null; using (StringReader reader = new StringReader(this.txtSource.Text)) { assId = engine.ParseAndCompileTemplate(new string[] { "System.Windows.Forms.dll" }, reader); } string output = engine.RenderTemplateFromAssembly(assId, context); if (output == null) this.txtResult.Text = "*** ERROR:\r\n" + engine.ErrorMessage; else this.txtResult.Text = output; The difference here is that you can capture the assembly – or rather an Id to it – and potentially hold on to it to render again later assuming the template hasn’t changed. The HostContainers take advantage of this feature to cache the assemblies based on certain criteria like a filename and file time step or a string hash that if not change indicate that an assembly can be reused. Note that ParseAndCompileTemplate returns an assembly Id rather than the assembly itself. This is done so that that the assembly always stays in the host’s AppDomain and is not passed across AppDomain boundaries which would cause load failures. We’ll talk more about this in a minute but for now just realize that assemblies references are stored in a list and are accessible by this ID to allow locating and re-executing of the assembly based on that id. Reuse of the assembly avoids recompilation overhead and creation of yet another assembly that loads into the current AppDomain. You can play around with several different versions of the above code in the main sample form: Using Hosting Containers for more Control and Caching The above examples simply render templates into assemblies each and every time they are executed. While this works and is even reasonably fast, it’s not terribly efficient. If you render templates more than once it would be nice if you could cache the generated assemblies for example to avoid re-compiling and creating of a new assembly each time. Additionally it would be nice to load template assemblies into a separate AppDomain optionally to be able to be able to unload assembli es and also to protect your host application from scripting attacks with malicious template code. Hosting containers provide also provide a wrapper around the RazorEngine<T> instance, a factory (which allows creation in separate AppDomains) and an easy way to start and stop the container ‘runtime’. The Razor Hosting samples provide two hosting containers: RazorFolderHostContainer and StringHostContainer. The folder host provides a simple runtime environment for a folder structure similar in the way that the ASP.NET runtime handles a virtual directory as it’s ‘application' root. Templates are loaded from disk in relative paths and the resulting assemblies are cached unless the template on disk is changed. The string host also caches templates based on string hashes – if the same string is passed a second time a cached version of the assembly is used. Here’s how HostContainers work. I’ll use the FolderHostContainer because it’s likely the most common way you’d use templates – from disk based templates that can be easily edited and maintained on disk. The first step is to create an instance of it and keep it around somewhere (in the example it’s attached as a property to the Form): RazorFolderHostContainer Host = new RazorFolderHostContainer(); public RazorFolderHostForm() { InitializeComponent(); // The base path for templates - templates are rendered with relative paths // based on this path. Host.TemplatePath = Path.Combine(Environment.CurrentDirectory, TemplateBaseFolder); // Add any assemblies you want reference in your templates Host.ReferencedAssemblies.Add("System.Windows.Forms.dll"); // Start up the host container Host.Start(); } Next anytime you want to render a template you can use simple code like this: private void RenderTemplate(string fileName) { // Pass the template path via the Context var relativePath = Utilities.GetRelativePath(fileName, Host.TemplatePath); if (!Host.RenderTemplate(relativePath, this.Context, Host.RenderingOutputFile)) { MessageBox.Show("Error: " + Host.ErrorMessage); return; } this.webBrowser1.Navigate("file://" + Host.RenderingOutputFile); } You can also render the output to a string instead of to a file: string result = Host.RenderTemplateToString(relativePath,context); Finally if you want to release the engine and shut down the hosting AppDomain you can simply do: Host.Stop(); Stopping the AppDomain and restarting it (ie. calling Stop(); followed by Start()) is also a nice way to release all resources in the AppDomain. The FolderBased domain also supports partial Rendering based on root path based relative paths with the same caching characteristics as the main templates. From within a template you can call out to a partial like this: @RenderPartial(@"partials\PartialRendering.cshtml", Context) where partials\PartialRendering.cshtml is a relative to the template root folder. The folder host example lets you load up templates from disk and display the result in a Web Browser control which demonstrates using Razor HTML output from templates that contain HTML syntax which happens to me my target scenario for Html Help Builder. The Razor Engine Wrapper Project The project I created to wrap Razor hosting has a fair bit of code and a number of classes associated with it. Most of the components are internally used and as you can see using the final RazorEngine<T> and HostContainer classes is pretty easy. The classes are extensible and I suspect developers will want to build more customized host containers for their applications. Host containers are the key to wrapping up all functionality – Engine, BaseTemplate, AppDomain Hosting, Caching etc in a logical piece that is ready to be plugged into an application. When looking at the code there are a couple of core features provided: Core Razor Engine Hosting This is the core Razor hosting which provides the basics of loading a template, compiling it into an assembly and executing it. This is fairly straightforward, but without a host container that can cache assemblies based on some criteria templates are recompiled and re-created each time which is inefficient (although pretty fast). The base engine wrapper implementation also supports hosting the Razor runtime in a separate AppDomain for security and the ability to unload it on demand. Host Containers The engine hosting itself doesn’t provide any sort of ‘runtime’ service like picking up files from disk, caching assemblies and so forth. So my implementation provides two HostContainers: RazorFolderHostContainer and RazorStringHostContainer. The FolderHost works off a base directory and loads templates based on relative paths (sort of like the ASP.NET runtime does off a virtual). The HostContainers also deal with caching of template assemblies – for the folder host the file date is tracked and checked for updates and unless the template is changed a cached assembly is reused. The StringHostContainer similiarily checks string hashes to figure out whether a particular string template was previously compiled and executed. The HostContainers also act as a simple startup environment and a single reference to easily store and reuse in an application. TemplateBase Classes The template base classes are the base classes that from which the Razor engine generates .NET code. A template is parsed into a class with an Execute() method and the class is based on this template type you can specify. RazorEngine<TBaseTemplate> can receive this type and the HostContainers default to specific templates in their base implementations. Template classes are customizable to allow you to create templates that provide application specific features and interaction from the template to your host application. How does the RazorEngine wrapper work? You can browse the source code in the links above or in the repository or download the source, but I’ll highlight some key features here. Here’s part of the RazorEngine implementation that can be used to host the runtime and that demonstrates the key code required to host the Razor runtime. The RazorEngine class is implemented as a generic class to reflect the Template base class type: public class RazorEngine<TBaseTemplateType> : MarshalByRefObject where TBaseTemplateType : RazorTemplateBase The generic type is used to internally provide easier access to the template type and assignments on it as part of the template processing. The class also inherits MarshalByRefObject to allow execution over AppDomain boundaries – something that all the classes discussed here need to do since there is much interaction between the host and the template. The first two key methods deal with creating a template assembly: /// <summary> /// Creates an instance of the RazorHost with various options applied. /// Applies basic namespace imports and the name of the class to generate /// </summary> /// <param name="generatedNamespace"></param> /// <param name="generatedClass"></param> /// <returns></returns> protected RazorTemplateEngine CreateHost(string generatedNamespace, string generatedClass) { Type baseClassType = typeof(TBaseTemplateType); RazorEngineHost host = new RazorEngineHost(new CSharpRazorCodeLanguage()); host.DefaultBaseClass = baseClassType.FullName; host.DefaultClassName = generatedClass; host.DefaultNamespace = generatedNamespace; host.NamespaceImports.Add("System"); host.NamespaceImports.Add("System.Text"); host.NamespaceImports.Add("System.Collections.Generic"); host.NamespaceImports.Add("System.Linq"); host.NamespaceImports.Add("System.IO"); return new RazorTemplateEngine(host); } /// <summary> /// Parses and compiles a markup template into an assembly and returns /// an assembly name. The name is an ID that can be passed to /// ExecuteTemplateByAssembly which picks up a cached instance of the /// loaded assembly. /// /// </summary> /// <param name="namespaceOfGeneratedClass">The namespace of the class to generate from the template</param> /// <param name="generatedClassName">The name of the class to generate from the template</param> /// <param name="ReferencedAssemblies">Any referenced assemblies by dll name only. Assemblies must be in execution path of host or in GAC.</param> /// <param name="templateSourceReader">Textreader that loads the template</param> /// <remarks> /// The actual assembly isn't returned here to allow for cross-AppDomain /// operation. If the assembly was returned it would fail for cross-AppDomain /// calls. /// </remarks> /// <returns>An assembly Id. The Assembly is cached in memory and can be used with RenderFromAssembly.</returns> public string ParseAndCompileTemplate( string namespaceOfGeneratedClass, string generatedClassName, string[] ReferencedAssemblies, TextReader templateSourceReader) { RazorTemplateEngine engine = CreateHost(namespaceOfGeneratedClass, generatedClassName); // Generate the template class as CodeDom GeneratorResults razorResults = engine.GenerateCode(templateSourceReader); // Create code from the codeDom and compile CSharpCodeProvider codeProvider = new CSharpCodeProvider(); CodeGeneratorOptions options = new CodeGeneratorOptions(); // Capture Code Generated as a string for error info // and debugging LastGeneratedCode = null; using (StringWriter writer = new StringWriter()) { codeProvider.GenerateCodeFromCompileUnit(razorResults.GeneratedCode, writer, options); LastGeneratedCode = writer.ToString(); } CompilerParameters compilerParameters = new CompilerParameters(ReferencedAssemblies); // Standard Assembly References compilerParameters.ReferencedAssemblies.Add("System.dll"); compilerParameters.ReferencedAssemblies.Add("System.Core.dll"); compilerParameters.ReferencedAssemblies.Add("Microsoft.CSharp.dll"); // dynamic support! // Also add the current assembly so RazorTemplateBase is available compilerParameters.ReferencedAssemblies.Add(Assembly.GetExecutingAssembly().CodeBase.Substring(8)); compilerParameters.GenerateInMemory = Configuration.CompileToMemory; if (!Configuration.CompileToMemory) compilerParameters.OutputAssembly = Path.Combine(Configuration.TempAssemblyPath, "_" + Guid.NewGuid().ToString("n") + ".dll"); CompilerResults compilerResults = codeProvider.CompileAssemblyFromDom(compilerParameters, razorResults.GeneratedCode); if (compilerResults.Errors.Count > 0) { var compileErrors = new StringBuilder(); foreach (System.CodeDom.Compiler.CompilerError compileError in compilerResults.Errors) compileErrors.Append(String.Format(Resources.LineX0TColX1TErrorX2RN, compileError.Line, compileError.Column, compileError.ErrorText)); this.SetError(compileErrors.ToString() + "\r\n" + LastGeneratedCode); return null; } AssemblyCache.Add(compilerResults.CompiledAssembly.FullName, compilerResults.CompiledAssembly); return compilerResults.CompiledAssembly.FullName; } Think of the internal CreateHost() method as setting up the assembly generated from each template. Each template compiles into a separate assembly. It sets up namespaces, and assembly references, the base class used and the name and namespace for the generated class. ParseAndCompileTemplate() then calls the CreateHost() method to receive the template engine generator which effectively generates a CodeDom from the template – the template is turned into .NET code. The code generated from our earlier example looks something like this: //------------------------------------------------------------------------------ // <auto-generated> // This code was generated by a tool. // Runtime Version:4.0.30319.1 // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace RazorTest { using System; using System.Text; using System.Collections.Generic; using System.Linq; using System.IO; using System.Reflection; public class RazorTemplate : RazorHosting.RazorTemplateBase { #line hidden public RazorTemplate() { } public override void Execute() { WriteLiteral("Hello "); Write(Context.FirstName); WriteLiteral("! Your entry was entered on: "); Write(Context.Entered); WriteLiteral("\r\n\r\n"); // Code block: Update the host Windows Form passed in through the context Context.WinForm.Text = "Hello World from Razor at " + DateTime.Now.ToString(); WriteLiteral("\r\nAppDomain Id:\r\n "); Write(AppDomain.CurrentDomain.FriendlyName); WriteLiteral("\r\n \r\nAssembly:\r\n "); Write(Assembly.GetExecutingAssembly().FullName); WriteLiteral("\r\n\r\nCode based output: \r\n"); // Write output with Response object from code string output = string.Empty; for (int i = 0; i < 10; i++) { output += i.ToString() + " "; } } } } Basically the template’s body is turned into code in an Execute method that is called. Internally the template’s Write method is fired to actually generate the output. Note that the class inherits from RazorTemplateBase which is the generic parameter I used to specify the base class when creating an instance in my RazorEngine host: var engine = new RazorEngine<RazorTemplateBase>(); This template class must be provided and it must implement an Execute() and Write() method. Beyond that you can create any class you chose and attach your own properties. My RazorTemplateBase class implementation is very simple: public class RazorTemplateBase : MarshalByRefObject, IDisposable { /// <summary> /// You can pass in a generic context object /// to use in your template code /// </summary> public dynamic Context { get; set; } /// <summary> /// Class that generates output. Currently ultra simple /// with only Response.Write() implementation. /// </summary> public RazorResponse Response { get; set; } public object HostContainer {get; set; } public object Engine { get; set; } public RazorTemplateBase() { Response = new RazorResponse(); } public virtual void Write(object value) { Response.Write(value); } public virtual void WriteLiteral(object value) { Response.Write(value); } /// <summary> /// Razor Parser implements this method /// </summary> public virtual void Execute() {} public virtual void Dispose() { if (Response != null) { Response.Dispose(); Response = null; } } } Razor fills in the Execute method when it generates its subclass and uses the Write() method to output content. As you can see I use a RazorResponse() class here to generate output. This isn’t necessary really, as you could use a StringBuilder or StringWriter() directly, but I prefer using Response object so I can extend the Response behavior as needed. The RazorResponse class is also very simple and merely acts as a wrapper around a TextWriter: public class RazorResponse : IDisposable { /// <summary> /// Internal text writer - default to StringWriter() /// </summary> public TextWriter Writer = new StringWriter(); public virtual void Write(object value) { Writer.Write(value); } public virtual void WriteLine(object value) { Write(value); Write("\r\n"); } public virtual void WriteFormat(string format, params object[] args) { Write(string.Format(format, args)); } public override string ToString() { return Writer.ToString(); } public virtual void Dispose() { Writer.Close(); } public virtual void SetTextWriter(TextWriter writer) { // Close original writer if (Writer != null) Writer.Close(); Writer = writer; } } The Rendering Methods of RazorEngine At this point I’ve talked about the assembly generation logic and the template implementation itself. What’s left is that once you’ve generated the assembly is to execute it. The code to do this is handled in the various RenderXXX methods of the RazorEngine class. Let’s look at the lowest level one of these which is RenderTemplateFromAssembly() and a couple of internal support methods that handle instantiating and invoking of the generated template method: public string RenderTemplateFromAssembly( string assemblyId, string generatedNamespace, string generatedClass, object context, TextWriter outputWriter) { this.SetError(); Assembly generatedAssembly = AssemblyCache[assemblyId]; if (generatedAssembly == null) { this.SetError(Resources.PreviouslyCompiledAssemblyNotFound); return null; } string className = generatedNamespace + "." + generatedClass; Type type; try { type = generatedAssembly.GetType(className); } catch (Exception ex) { this.SetError(Resources.UnableToCreateType + className + ": " + ex.Message); return null; } // Start with empty non-error response (if we use a writer) string result = string.Empty; using(TBaseTemplateType instance = InstantiateTemplateClass(type)) { if (instance == null) return null; if (outputWriter != null) instance.Response.SetTextWriter(outputWriter); if (!InvokeTemplateInstance(instance, context)) return null; // Capture string output if implemented and return // otherwise null is returned if (outputWriter == null) result = instance.Response.ToString(); } return result; } protected virtual TBaseTemplateType InstantiateTemplateClass(Type type) { TBaseTemplateType instance = Activator.CreateInstance(type) as TBaseTemplateType; if (instance == null) { SetError(Resources.CouldnTActivateTypeInstance + type.FullName); return null; } instance.Engine = this; // If a HostContainer was set pass that to the template too instance.HostContainer = this.HostContainer; return instance; } /// <summary> /// Internally executes an instance of the template, /// captures errors on execution and returns true or false /// </summary> /// <param name="instance">An instance of the generated template</param> /// <returns>true or false - check ErrorMessage for errors</returns> protected virtual bool InvokeTemplateInstance(TBaseTemplateType instance, object context) { try { instance.Context = context; instance.Execute(); } catch (Exception ex) { this.SetError(Resources.TemplateExecutionError + ex.Message); return false; } finally { // Must make sure Response is closed instance.Response.Dispose(); } return true; } The RenderTemplateFromAssembly method basically requires the namespace and class to instantate and creates an instance of the class using InstantiateTemplateClass(). It then invokes the method with InvokeTemplateInstance(). These two methods are broken out because they are re-used by various other rendering methods and also to allow subclassing and providing additional configuration tasks to set properties and pass values to templates at execution time. In the default mode instantiation sets the Engine and HostContainer (discussed later) so the template can call back into the template engine, and the context is set when the template method is invoked. The various RenderXXX methods use similar code although they create the assemblies first. If you’re after potentially cashing assemblies the method is the one to call and that’s exactly what the two HostContainer classes do. More on that in a minute, but before we get into HostContainers let’s talk about AppDomain hosting and the like. Running Templates in their own AppDomain With the RazorEngine class above, when a template is parsed into an assembly and executed the assembly is created (in memory or on disk – you can configure that) and cached in the current AppDomain. In .NET once an assembly has been loaded it can never be unloaded so if you’re loading lots of templates and at some time you want to release them there’s no way to do so. If however you load the assemblies in a separate AppDomain that new AppDomain can be unloaded and the assemblies loaded in it with it. In order to host the templates in a separate AppDomain the easiest thing to do is to run the entire RazorEngine in a separate AppDomain. Then all interaction occurs in the other AppDomain and no further changes have to be made. To facilitate this there is a RazorEngineFactory which has methods that can instantiate the RazorHost in a separate AppDomain as well as in the local AppDomain. The host creates the remote instance and then hangs on to it to keep it alive as well as providing methods to shut down the AppDomain and reload the engine. Sounds complicated but cross-AppDomain invocation is actually fairly easy to implement. Here’s some of the relevant code from the RazorEngineFactory class. Like the RazorEngine this class is generic and requires a template base type in the generic class name: public class RazorEngineFactory<TBaseTemplateType> where TBaseTemplateType : RazorTemplateBase Here are the key methods of interest: /// <summary> /// Creates an instance of the RazorHost in a new AppDomain. This /// version creates a static singleton that that is cached and you /// can call UnloadRazorHostInAppDomain to unload it. /// </summary> /// <returns></returns> public static RazorEngine<TBaseTemplateType> CreateRazorHostInAppDomain() { if (Current == null) Current = new RazorEngineFactory<TBaseTemplateType>(); return Current.GetRazorHostInAppDomain(); } public static void UnloadRazorHostInAppDomain() { if (Current != null) Current.UnloadHost(); Current = null; } /// <summary> /// Instance method that creates a RazorHost in a new AppDomain. /// This method requires that you keep the Factory around in /// order to keep the AppDomain alive and be able to unload it. /// </summary> /// <returns></returns> public RazorEngine<TBaseTemplateType> GetRazorHostInAppDomain() { LocalAppDomain = CreateAppDomain(null); if (LocalAppDomain == null) return null; /// Create the instance inside of the new AppDomain /// Note: remote domain uses local EXE's AppBasePath!!! RazorEngine<TBaseTemplateType> host = null; try { Assembly ass = Assembly.GetExecutingAssembly(); string AssemblyPath = ass.Location; host = (RazorEngine<TBaseTemplateType>) LocalAppDomain.CreateInstanceFrom(AssemblyPath, typeof(RazorEngine<TBaseTemplateType>).FullName).Unwrap(); } catch (Exception ex) { ErrorMessage = ex.Message; return null; } return host; } /// <summary> /// Internally creates a new AppDomain in which Razor templates can /// be run. /// </summary> /// <param name="appDomainName"></param> /// <returns></returns> private AppDomain CreateAppDomain(string appDomainName) { if (appDomainName == null) appDomainName = "RazorHost_" + Guid.NewGuid().ToString("n"); AppDomainSetup setup = new AppDomainSetup(); // *** Point at current directory setup.ApplicationBase = AppDomain.CurrentDomain.BaseDirectory; AppDomain localDomain = AppDomain.CreateDomain(appDomainName, null, setup); return localDomain; } /// <summary> /// Allow unloading of the created AppDomain to release resources /// All internal resources in the AppDomain are released including /// in memory compiled Razor assemblies. /// </summary> public void UnloadHost() { if (this.LocalAppDomain != null) { AppDomain.Unload(this.LocalAppDomain); this.LocalAppDomain = null; } } The static CreateRazorHostInAppDomain() is the key method that startup code usually calls. It uses a Current singleton instance to an instance of itself that is created cross AppDomain and is kept alive because it’s static. GetRazorHostInAppDomain actually creates a cross-AppDomain instance which first creates a new AppDomain and then loads the RazorEngine into it. The remote Proxy instance is returned as a result to the method and can be used the same as a local instance. The code to run with a remote AppDomain is simple: private RazorEngine<RazorTemplateBase> CreateHost() { if (this.Host != null) return this.Host; // Use Static Methods - no error message if host doesn't load this.Host = RazorEngineFactory<RazorTemplateBase>.CreateRazorHostInAppDomain(); if (this.Host == null) { MessageBox.Show("Unable to load Razor Template Host", "Razor Hosting", MessageBoxButtons.OK, MessageBoxIcon.Exclamation); } return this.Host; } This code relies on a local reference of the Host which is kept around for the duration of the app (in this case a form reference). To use this you’d simply do: this.Host = CreateHost(); if (host == null) return; string result = host.RenderTemplate( this.txtSource.Text, new string[] { "System.Windows.Forms.dll", "Westwind.Utilities.dll" }, this.CustomContext); if (result == null) { MessageBox.Show(host.ErrorMessage, "Template Execution Error", MessageBoxButtons.OK, MessageBoxIcon.Exclamation); return; } this.txtResult.Text = result; Now all templates run in a remote AppDomain and can be unloaded with simple code like this: RazorEngineFactory<RazorTemplateBase>.UnloadRazorHostInAppDomain(); this.Host = null; One Step further – Providing a caching ‘Runtime’ Once we can load templates in a remote AppDomain we can add some additional functionality like assembly caching based on application specific features. One of my typical scenarios is to render templates out of a scripts folder. So all templates live in a folder and they change infrequently. So a Folder based host that can compile these templates once and then only recompile them if something changes would be ideal. Enter host containers which are basically wrappers around the RazorEngine<t> and RazorEngineFactory<t>. They provide additional logic for things like file caching based on changes on disk or string hashes for string based template inputs. The folder host also provides for partial rendering logic through a custom template base implementation. There’s a base implementation in RazorBaseHostContainer, which provides the basics for hosting a RazorEngine, which includes the ability to start and stop the engine, cache assemblies and add references: public abstract class RazorBaseHostContainer<TBaseTemplateType> : MarshalByRefObject where TBaseTemplateType : RazorTemplateBase, new() { public RazorBaseHostContainer() { UseAppDomain = true; GeneratedNamespace = "__RazorHost"; } /// <summary> /// Determines whether the Container hosts Razor /// in a separate AppDomain. Seperate AppDomain /// hosting allows unloading and releasing of /// resources. /// </summary> public bool UseAppDomain { get; set; } /// <summary> /// Base folder location where the AppDomain /// is hosted. By default uses the same folder /// as the host application. /// /// Determines where binary dependencies are /// found for assembly references. /// </summary> public string BaseBinaryFolder { get; set; } /// <summary> /// List of referenced assemblies as string values. /// Must be in GAC or in the current folder of the host app/ /// base BinaryFolder /// </summary> public List<string> ReferencedAssemblies = new List<string>(); /// <summary> /// Name of the generated namespace for template classes /// </summary> public string GeneratedNamespace {get; set; } /// <summary> /// Any error messages /// </summary> public string ErrorMessage { get; set; } /// <summary> /// Cached instance of the Host. Required to keep the /// reference to the host alive for multiple uses. /// </summary> public RazorEngine<TBaseTemplateType> Engine; /// <summary> /// Cached instance of the Host Factory - so we can unload /// the host and its associated AppDomain. /// </summary> protected RazorEngineFactory<TBaseTemplateType> EngineFactory; /// <summary> /// Keep track of each compiled assembly /// and when it was compiled. /// /// Use a hash of the string to identify string /// changes. /// </summary> protected Dictionary<int, CompiledAssemblyItem> LoadedAssemblies = new Dictionary<int, CompiledAssemblyItem>(); /// <summary> /// Call to start the Host running. Follow by a calls to RenderTemplate to /// render individual templates. Call Stop when done. /// </summary> /// <returns>true or false - check ErrorMessage on false </returns> public virtual bool Start() { if (Engine == null) { if (UseAppDomain) Engine = RazorEngineFactory<TBaseTemplateType>.CreateRazorHostInAppDomain(); else Engine = RazorEngineFactory<TBaseTemplateType>.CreateRazorHost(); Engine.Configuration.CompileToMemory = true; Engine.HostContainer = this; if (Engine == null) { this.ErrorMessage = EngineFactory.ErrorMessage; return false; } } return true; } /// <summary> /// Stops the Host and releases the host AppDomain and cached /// assemblies. /// </summary> /// <returns>true or false</returns> public bool Stop() { this.LoadedAssemblies.Clear(); RazorEngineFactory<RazorTemplateBase>.UnloadRazorHostInAppDomain(); this.Engine = null; return true; } … } This base class provides most of the mechanics to host the runtime, but no application specific implementation for rendering. There are rendering functions but they just call the engine directly and provide no caching – there’s no context to decide how to cache and reuse templates. The key methods are Start and Stop and their main purpose is to start a new AppDomain (optionally) and shut it down when requested. The RazorFolderHostContainer – Folder Based Runtime Hosting Let’s look at the more application specific RazorFolderHostContainer implementation which is defined like this: public class RazorFolderHostContainer : RazorBaseHostContainer<RazorTemplateFolderHost> Note that a customized RazorTemplateFolderHost class template is used for this implementation that supports partial rendering in form of a RenderPartial() method that’s available to templates. The folder host’s features are: Render templates based on a Template Base Path (a ‘virtual’ if you will) Cache compiled assemblies based on the relative path and file time stamp File changes on templates cause templates to be recompiled into new assemblies Support for partial rendering using base folder relative pathing As shown in the startup examples earlier host containers require some startup code with a HostContainer tied to a persistent property (like a Form property): // The base path for templates - templates are rendered with relative paths // based on this path. HostContainer.TemplatePath = Path.Combine(Environment.CurrentDirectory, TemplateBaseFolder); // Default output rendering disk location HostContainer.RenderingOutputFile = Path.Combine(HostContainer.TemplatePath, "__Preview.htm"); // Add any assemblies you want reference in your templates HostContainer.ReferencedAssemblies.Add("System.Windows.Forms.dll"); // Start up the host container HostContainer.Start(); Once that’s done, you can render templates with the host container: // Pass the template path for full filename seleted with OpenFile Dialog // relativepath is: subdir\file.cshtml or file.cshtml or ..\file.cshtml var relativePath = Utilities.GetRelativePath(fileName, HostContainer.TemplatePath); if (!HostContainer.RenderTemplate(relativePath, Context, HostContainer.RenderingOutputFile)) { MessageBox.Show("Error: " + HostContainer.ErrorMessage); return; } webBrowser1.Navigate("file://" + HostContainer.RenderingOutputFile); The most critical task of the RazorFolderHostContainer implementation is to retrieve a template from disk, compile and cache it and then deal with deciding whether subsequent requests need to re-compile the template or simply use a cached version. Internally the GetAssemblyFromFileAndCache() handles this task: /// <summary> /// Internally checks if a cached assembly exists and if it does uses it /// else creates and compiles one. Returns an assembly Id to be /// used with the LoadedAssembly list. /// </summary> /// <param name="relativePath"></param> /// <param name="context"></param> /// <returns></returns> protected virtual CompiledAssemblyItem GetAssemblyFromFileAndCache(string relativePath) { string fileName = Path.Combine(TemplatePath, relativePath).ToLower(); int fileNameHash = fileName.GetHashCode(); if (!File.Exists(fileName)) { this.SetError(Resources.TemplateFileDoesnTExist + fileName); return null; } CompiledAssemblyItem item = null; this.LoadedAssemblies.TryGetValue(fileNameHash, out item); string assemblyId = null; // Check for cached instance if (item != null) { var fileTime = File.GetLastWriteTimeUtc(fileName); if (fileTime <= item.CompileTimeUtc) assemblyId = item.AssemblyId; } else item = new CompiledAssemblyItem(); // No cached instance - create assembly and cache if (assemblyId == null) { string safeClassName = GetSafeClassName(fileName); StreamReader reader = null; try { reader = new StreamReader(fileName, true); } catch (Exception ex) { this.SetError(Resources.ErrorReadingTemplateFile + fileName); return null; } assemblyId = Engine.ParseAndCompileTemplate(this.ReferencedAssemblies.ToArray(), reader); // need to ensure reader is closed if (reader != null) reader.Close(); if (assemblyId == null) { this.SetError(Engine.ErrorMessage); return null; } item.AssemblyId = assemblyId; item.CompileTimeUtc = DateTime.UtcNow; item.FileName = fileName; item.SafeClassName = safeClassName; this.LoadedAssemblies[fileNameHash] = item; } return item; } This code uses a LoadedAssembly dictionary which is comprised of a structure that holds a reference to a compiled assembly, a full filename and file timestamp and an assembly id. LoadedAssemblies (defined on the base class shown earlier) is essentially a cache for compiled assemblies and they are identified by a hash id. In the case of files the hash is a GetHashCode() from the full filename of the template. The template is checked for in the cache and if not found the file stamp is checked. If that’s newer than the cache’s compilation date the template is recompiled otherwise the version in the cache is used. All the core work defers to a RazorEngine<T> instance to ParseAndCompileTemplate(). The three rendering specific methods then are rather simple implementations with just a few lines of code dealing with parameter and return value parsing: /// <summary> /// Renders a template to a TextWriter. Useful to write output into a stream or /// the Response object. Used for partial rendering. /// </summary> /// <param name="relativePath">Relative path to the file in the folder structure</param> /// <param name="context">Optional context object or null</param> /// <param name="writer">The textwriter to write output into</param> /// <returns></returns> public bool RenderTemplate(string relativePath, object context, TextWriter writer) { // Set configuration data that is to be passed to the template (any object) Engine.TemplatePerRequestConfigurationData = new RazorFolderHostTemplateConfiguration() { TemplatePath = Path.Combine(this.TemplatePath, relativePath), TemplateRelativePath = relativePath, }; CompiledAssemblyItem item = GetAssemblyFromFileAndCache(relativePath); if (item == null) { writer.Close(); return false; } try { // String result will be empty as output will be rendered into the // Response object's stream output. However a null result denotes // an error string result = Engine.RenderTemplateFromAssembly(item.AssemblyId, context, writer); if (result == null) { this.SetError(Engine.ErrorMessage); return false; } } catch (Exception ex) { this.SetError(ex.Message); return false; } finally { writer.Close(); } return true; } /// <summary> /// Render a template from a source file on disk to a specified outputfile. /// </summary> /// <param name="relativePath">Relative path off the template root folder. Format: path/filename.cshtml</param> /// <param name="context">Any object that will be available in the template as a dynamic of this.Context</param> /// <param name="outputFile">Optional - output file where output is written to. If not specified the /// RenderingOutputFile property is used instead /// </param> /// <returns>true if rendering succeeds, false on failure - check ErrorMessage</returns> public bool RenderTemplate(string relativePath, object context, string outputFile) { if (outputFile == null) outputFile = RenderingOutputFile; try { using (StreamWriter writer = new StreamWriter(outputFile, false, Engine.Configuration.OutputEncoding, Engine.Configuration.StreamBufferSize)) { return RenderTemplate(relativePath, context, writer); } } catch (Exception ex) { this.SetError(ex.Message); return false; } return true; } /// <summary> /// Renders a template to string. Useful for RenderTemplate /// </summary> /// <param name="relativePath"></param> /// <param name="context"></param> /// <returns></returns> public string RenderTemplateToString(string relativePath, object context) { string result = string.Empty; try { using (StringWriter writer = new StringWriter()) { // String result will be empty as output will be rendered into the // Response object's stream output. However a null result denotes // an error if (!RenderTemplate(relativePath, context, writer)) { this.SetError(Engine.ErrorMessage); return null; } result = writer.ToString(); } } catch (Exception ex) { this.SetError(ex.Message); return null; } return result; } The idea is that you can create custom host container implementations that do exactly what you want fairly easily. Take a look at both the RazorFolderHostContainer and RazorStringHostContainer classes for the basic concepts you can use to create custom implementations. Notice also that you can set the engine’s PerRequestConfigurationData() from the host container: // Set configuration data that is to be passed to the template (any object) Engine.TemplatePerRequestConfigurationData = new RazorFolderHostTemplateConfiguration() { TemplatePath = Path.Combine(this.TemplatePath, relativePath), TemplateRelativePath = relativePath, }; which when set to a non-null value is passed to the Template’s InitializeTemplate() method. This method receives an object parameter which you can cast as needed: public override void InitializeTemplate(object configurationData) { // Pick up configuration data and stuff into Request object RazorFolderHostTemplateConfiguration config = configurationData as RazorFolderHostTemplateConfiguration; this.Request.TemplatePath = config.TemplatePath; this.Request.TemplateRelativePath = config.TemplateRelativePath; } With this data you can then configure any custom properties or objects on your main template class. It’s an easy way to pass data from the HostContainer all the way down into the template. The type you use is of type object so you have to cast it yourself, and it must be serializable since it will likely run in a separate AppDomain. This might seem like an ugly way to pass data around – normally I’d use an event delegate to call back from the engine to the host, but since this is running over AppDomain boundaries events get really tricky and passing a template instance back up into the host over AppDomain boundaries doesn’t work due to serialization issues. So it’s easier to pass the data from the host down into the template using this rather clumsy approach of set and forward. It’s ugly, but it’s something that can be hidden in the host container implementation as I’ve done here. It’s also not something you have to do in every implementation so this is kind of an edge case, but I know I’ll need to pass a bunch of data in some of my applications and this will be the easiest way to do so. Summing Up Hosting the Razor runtime is something I got jazzed up about quite a bit because I have an immediate need for this type of templating/merging/scripting capability in an application I’m working on. I’ve also been using templating in many apps and it’s always been a pain to deal with. The Razor engine makes this whole experience a lot cleaner and more light weight and with these wrappers I can now plug .NET based templating into my code literally with a few lines of code. That’s something to cheer about… I hope some of you will find this useful as well… Resources The examples and code require that you download the Razor runtimes. Projects are for Visual Studio 2010 running on .NET 4.0 Platform Installer 3.0 (install WebMatrix or MVC 3 for Razor Runtimes) Latest Code in Subversion Repository Download Snapshot of the Code Documentation (CHM Help File) © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET .NET

Read the article

ASP.NET Web API Exception Handling

- by Fredrik N

When I talk about exceptions in my product team I often talk about two kind of exceptions, business and critical exceptions. Business exceptions are exceptions thrown based on “business rules”, for example if you aren’t allowed to do a purchase. Business exceptions in most case aren’t important to log into a log file, they can directly be shown to the user. An example of a business exception could be "DeniedToPurchaseException”, or some validation exceptions such as “FirstNameIsMissingException” etc. Critical Exceptions are all other kind of exceptions such as the SQL server is down etc. Those kind of exception message need to be logged and should not reach the user, because they can contain information that can be harmful if it reach out to wrong kind of users. I often distinguish business exceptions from critical exceptions by creating a base class called BusinessException, then in my error handling code I catch on the type BusinessException and all other exceptions will be handled as critical exceptions. This blog post will be about different ways to handle exceptions and how Business and Critical Exceptions could be handled. Web API and Exceptions the basics When an exception is thrown in a ApiController a response message will be returned with a status code set to 500 and a response formatted by the formatters based on the “Accept” or “Content-Type” HTTP header, for example JSON or XML. Here is an example: public IEnumerable<string> Get() { throw new ApplicationException("Error!!!!!"); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The response message will be: HTTP/1.1 500 Internal Server Error Content-Length: 860 Content-Type: application/json; charset=utf-8 { "ExceptionType":"System.ApplicationException","Message":"Error!!!!!","StackTrace":" at ..."} .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The stack trace will be returned to the client, this is because of making it easier to debug. Be careful so you don’t leak out some sensitive information to the client. So as long as you are developing your API, this is not harmful. In a production environment it can be better to log exceptions and return a user friendly exception instead of the original exception. There is a specific exception shipped with ASP.NET Web API that will not use the formatters based on the “Accept” or “Content-Type” HTTP header, it is the exception is the HttpResponseException class. Here is an example where the HttpReponseExcetpion is used: // GET api/values [ExceptionHandling] public IEnumerable<string> Get() { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError)); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The response will not contain any content, only header information and the status code based on the HttpStatusCode passed as an argument to the HttpResponseMessage. Because the HttpResponsException takes a HttpResponseMessage as an argument, we can give the response a content: public IEnumerable<string> Get() { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent("My Error Message"), ReasonPhrase = "Critical Exception" }); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code above will have the following response: HTTP/1.1 500 Critical Exception Content-Length: 5 Content-Type: text/plain; charset=utf-8 My Error Message .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The Content property of the HttpResponseMessage doesn’t need to be just plain text, it can also be other formats, for example JSON, XML etc. By using the HttpResponseException we can for example catch an exception and throw a user friendly exception instead: public IEnumerable<string> Get() { try { DoSomething(); return new string[] { "value1", "value2" }; } catch (Exception e) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent("An error occurred, please try again or contact the administrator."), ReasonPhrase = "Critical Exception" }); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Adding a try catch to every ApiController methods will only end in duplication of code, by using a custom ExceptionFilterAttribute or our own custom ApiController base class we can reduce code duplicationof code and also have a more general exception handler for our ApiControllers . By creating a custom ApiController’s and override the ExecuteAsync method, we can add a try catch around the base.ExecuteAsync method, but I prefer to skip the creation of a own custom ApiController, better to use a solution that require few files to be modified. The ExceptionFilterAttribute has a OnException method that we can override and add our exception handling. Here is an example: using System; using System.Diagnostics; using System.Net; using System.Net.Http; using System.Web.Http; using System.Web.Http.Filters; public class ExceptionHandlingAttribute : ExceptionFilterAttribute { public override void OnException(HttpActionExecutedContext context) { if (context.Exception is BusinessException) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent(context.Exception.Message), ReasonPhrase = "Exception" }); } //Log Critical errors Debug.WriteLine(context.Exception); throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent("An error occurred, please try again or contact the administrator."), ReasonPhrase = "Critical Exception" }); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note: Something to have in mind is that the ExceptionFilterAttribute will be ignored if the ApiController action method throws a HttpResponseException. The code above will always make sure a HttpResponseExceptions will be returned, it will also make sure the critical exceptions will show a more user friendly message. The OnException method can also be used to log exceptions. By using a ExceptionFilterAttribute the Get() method in the previous example can now look like this: public IEnumerable<string> Get() { DoSomething(); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } To use the an ExceptionFilterAttribute, we can for example add the ExceptionFilterAttribute to our ApiControllers methods or to the ApiController class definition, or register it globally for all ApiControllers. You can read more about is here. Note: If something goes wrong in the ExceptionFilterAttribute and an exception is thrown that is not of type HttpResponseException, a formatted exception will be thrown with stack trace etc to the client. How about using a custom IHttpActionInvoker? We can create our own IHTTPActionInvoker and add Exception handling to the invoker. The IHttpActionInvoker will be used to invoke the ApiController’s ExecuteAsync method. Here is an example where the default IHttpActionInvoker, ApiControllerActionInvoker, is used to add exception handling: public class MyApiControllerActionInvoker : ApiControllerActionInvoker { public override Task<HttpResponseMessage> InvokeActionAsync(HttpActionContext actionContext, System.Threading.CancellationToken cancellationToken) { var result = base.InvokeActionAsync(actionContext, cancellationToken); if (result.Exception != null && result.Exception.GetBaseException() != null) { var baseException = result.Exception.GetBaseException(); if (baseException is BusinessException) { return Task.Run<HttpResponseMessage>(() => new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent(baseException.Message), ReasonPhrase = "Error" }); } else { //Log critical error Debug.WriteLine(baseException); return Task.Run<HttpResponseMessage>(() => new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent(baseException.Message), ReasonPhrase = "Critical Error" }); } } return result; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You can register the IHttpActionInvoker with your own IoC to resolve the MyApiContollerActionInvoker, or add it in the Global.asax: GlobalConfiguration.Configuration.Services.Remove(typeof(IHttpActionInvoker), GlobalConfiguration.Configuration.Services.GetActionInvoker()); GlobalConfiguration.Configuration.Services.Add(typeof(IHttpActionInvoker), new MyApiControllerActionInvoker()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } How about using a Message Handler for Exception Handling? By creating a custom Message Handler, we can handle error after the ApiController and the ExceptionFilterAttribute is invoked and in that way create a global exception handler, BUT, the only thing we can take a look at is the HttpResponseMessage, we can’t add a try catch around the Message Handler’s SendAsync method. The last Message Handler that will be used in the Wep API pipe-line is the HttpControllerDispatcher and this Message Handler is added to the HttpServer in an early stage. The HttpControllerDispatcher will use the IHttpActionInvoker to invoke the ApiController method. The HttpControllerDipatcher has a try catch that will turn ALL exceptions into a HttpResponseMessage, so that is the reason why a try catch around the SendAsync in a custom Message Handler want help us. If we create our own Host for the Wep API we could create our own custom HttpControllerDispatcher and add or exception handler to that class, but that would be little tricky but is possible. We can in a Message Handler take a look at the HttpResponseMessage’s IsSuccessStatusCode property to see if the request has failed and if we throw the HttpResponseException in our ApiControllers, we could use the HttpResponseException and give it a Reason Phrase and use that to identify business exceptions or critical exceptions. I wouldn’t add an exception handler into a Message Handler, instead I should use the ExceptionFilterAttribute and register it globally for all ApiControllers. BUT, now to another interesting issue. What will happen if we have a Message Handler that throws an exception? Those exceptions will not be catch and handled by the ExceptionFilterAttribute. I found a bug in my previews blog post about “Log message Request and Response in ASP.NET WebAPI” in the MessageHandler I use to log incoming and outgoing messages. Here is the code from my blog before I fixed the bug: public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var corrId = string.Format("{0}{1}", DateTime.Now.Ticks, Thread.CurrentThread.ManagedThreadId); var requestInfo = string.Format("{0} {1}", request.Method, request.RequestUri); var requestMessage = await request.Content.ReadAsByteArrayAsync(); await IncommingMessageAsync(corrId, requestInfo, requestMessage); var response = await base.SendAsync(request, cancellationToken); var responseMessage = await response.Content.ReadAsByteArrayAsync(); await OutgoingMessageAsync(corrId, requestInfo, responseMessage); return response; } protected abstract Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message); protected abstract Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If a ApiController throws a HttpResponseException, the Content property of the HttpResponseMessage from the SendAsync will be NULL. So a null reference exception is thrown within the MessageHandler. The yellow screen of death will be returned to the client, and the content is HTML and the Http status code is 500. The bug in the MessageHandler was solved by adding a check against the HttpResponseMessage’s IsSuccessStatusCode property: public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var corrId = string.Format("{0}{1}", DateTime.Now.Ticks, Thread.CurrentThread.ManagedThreadId); var requestInfo = string.Format("{0} {1}", request.Method, request.RequestUri); var requestMessage = await request.Content.ReadAsByteArrayAsync(); await IncommingMessageAsync(corrId, requestInfo, requestMessage); var response = await base.SendAsync(request, cancellationToken); byte[] responseMessage; if (response.IsSuccessStatusCode) responseMessage = await response.Content.ReadAsByteArrayAsync(); else responseMessage = Encoding.UTF8.GetBytes(response.ReasonPhrase); await OutgoingMessageAsync(corrId, requestInfo, responseMessage); return response; } protected abstract Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message); protected abstract Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If we don’t handle the exceptions that can occur in a custom Message Handler, we can have a hard time to find the problem causing the exception. The savior in this case is the Global.asax’s Application_Error: protected void Application_Error() { var exception = Server.GetLastError(); Debug.WriteLine(exception); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } I would recommend you to add the Application_Error to the Global.asax and log all exceptions to make sure all kind of exception is handled. Summary There are different ways we could add Exception Handling to the Wep API, we can use a custom ApiController, ExceptionFilterAttribute, IHttpActionInvoker or Message Handler. The ExceptionFilterAttribute would be a good place to add a global exception handling, require very few modification, just register it globally for all ApiControllers, even the IHttpActionInvoker can be used to minimize the modifications of files. Adding the Application_Error to the global.asax is a good way to catch all unhandled exception that can occur, for example exception thrown in a Message Handler. If you want to know when I have posted a blog post, you can follow me on twitter @fredrikn

Read the article

Announcing release of ASP.NET MVC 3, IIS Express, SQL CE 4, Web Farm Framework, Orchard, WebMatrix

- by ScottGu

I’m excited to announce the release today of several products: ASP.NET MVC 3 NuGet IIS Express 7.5 SQL Server Compact Edition 4 Web Deploy and Web Farm Framework 2.0 Orchard 1.0 WebMatrix 1.0 The above products are all free. They build upon the .NET 4 and VS 2010 release, and add a ton of additional value to ASP.NET (both Web Forms and MVC) and the Microsoft Web Server stack. ASP.NET MVC 3 Today we are shipping the final release of ASP.NET MVC 3. You can download and install ASP.NET MVC 3 here. The ASP.NET MVC 3 source code (released under an OSI-compliant open source license) can also optionally be downloaded here. ASP.NET MVC 3 is a significant update that brings with it a bunch of great features. Some of the improvements include: Razor ASP.NET MVC 3 ships with a new view-engine option called “Razor” (in addition to continuing to support/enhance the existing .aspx view engine). Razor minimizes the number of characters and keystrokes required when writing a view template, and enables a fast, fluid coding workflow. Unlike most template syntaxes, with Razor you do not need to interrupt your coding to explicitly denote the start and end of server blocks within your HTML. The Razor parser is smart enough to infer this from your code. This enables a compact and expressive syntax which is clean, fast and fun to type. You can learn more about Razor from some of the blog posts I’ve done about it over the last 6 months Introducing Razor New @model keyword in Razor Layouts with Razor Server-Side Comments with Razor Razor’s @: and <text> syntax Implicit and Explicit code nuggets with Razor Layouts and Sections with Razor Today’s release supports full code intellisense support for Razor (both VB and C#) with Visual Studio 2010 and the free Visual Web Developer 2010 Express. JavaScript Improvements ASP.NET MVC 3 enables richer JavaScript scenarios and takes advantage of emerging HTML5 capabilities. The AJAX and Validation helpers in ASP.NET MVC 3 now use an Unobtrusive JavaScript based approach. Unobtrusive JavaScript avoids injecting inline JavaScript into HTML, and enables cleaner separation of behavior using the new HTML 5 “data-“ attribute convention (which conveniently works on older browsers as well – including IE6). This keeps your HTML tight and clean, and makes it easier to optionally swap out or customize JS libraries. ASP.NET MVC 3 now includes built-in support for posting JSON-based parameters from client-side JavaScript to action methods on the server. This makes it easier to exchange data across the client and server, and build rich JavaScript front-ends. We think this capability will be particularly useful going forward with scenarios involving client templates and data binding (including the jQuery plugins the ASP.NET team recently contributed to the jQuery project). Previous releases of ASP.NET MVC included the core jQuery library. ASP.NET MVC 3 also now ships the jQuery Validate plugin (which our validation helpers use for client-side validation scenarios). We are also now shipping and including jQuery UI by default as well (which provides a rich set of client-side JavaScript UI widgets for you to use within projects). Improved Validation ASP.NET MVC 3 includes a bunch of validation enhancements that make it even easier to work with data. Client-side validation is now enabled by default with ASP.NET MVC 3 (using an onbtrusive javascript implementation). Today’s release also includes built-in support for Remote Validation - which enables you to annotate a model class with a validation attribute that causes ASP.NET MVC to perform a remote validation call to a server method when validating input on the client. The validation features introduced within .NET 4’s System.ComponentModel.DataAnnotations namespace are now supported by ASP.NET MVC 3. This includes support for the new IValidatableObject interface – which enables you to perform model-level validation, and allows you to provide validation error messages specific to the state of the overall model, or between two properties within the model. ASP.NET MVC 3 also supports the improvements made to the ValidationAttribute class in .NET 4. ValidationAttribute now supports a new IsValid overload that provides more information about the current validation context, such as what object is being validated. This enables richer scenarios where you can validate the current value based on another property of the model. We’ve shipped a built-in [Compare] validation attribute with ASP.NET MVC 3 that uses this support and makes it easy out of the box to compare and validate two property values. You can use any data access API or technology with ASP.NET MVC. This past year, though, we’ve worked closely with the .NET data team to ensure that the new EF Code First library works really well for ASP.NET MVC applications. These two posts of mine cover the latest EF Code First preview and demonstrates how to use it with ASP.NET MVC 3 to enable easy editing of data (with end to end client+server validation support). The final release of EF Code First will ship in the next few weeks. Today we are also publishing the first preview of a new MvcScaffolding project. It enables you to easily scaffold ASP.NET MVC 3 Controllers and Views, and works great with EF Code-First (and is pluggable to support other data providers). You can learn more about it – and install it via NuGet today - from Steve Sanderson’s MvcScaffolding blog post. Output Caching Previous releases of ASP.NET MVC supported output caching content at a URL or action-method level. With ASP.NET MVC V3 we are also enabling support for partial page output caching – which allows you to easily output cache regions or fragments of a response as opposed to the entire thing. This ends up being super useful in a lot of scenarios, and enables you to dramatically reduce the work your application does on the server. The new partial page output caching support in ASP.NET MVC 3 enables you to easily re-use cached sub-regions/fragments of a page across multiple URLs on a site. It supports the ability to cache the content either on the web-server, or optionally cache it within a distributed cache server like Windows Server AppFabric or memcached. I’ll post some tutorials on my blog that show how to take advantage of ASP.NET MVC 3’s new output caching support for partial page scenarios in the future. Better Dependency Injection ASP.NET MVC 3 provides better support for applying Dependency Injection (DI) and integrating with Dependency Injection/IOC containers. With ASP.NET MVC 3 you no longer need to author custom ControllerFactory classes in order to enable DI with Controllers. You can instead just register a Dependency Injection framework with ASP.NET MVC 3 and it will resolve dependencies not only for Controllers, but also for Views, Action Filters, Model Binders, Value Providers, Validation Providers, and Model Metadata Providers that you use within your application. This makes it much easier to cleanly integrate dependency injection within your projects. Other Goodies ASP.NET MVC 3 includes dozens of other nice improvements that help to both reduce the amount of code you write, and make the code you do write cleaner. Here are just a few examples: Improved New Project dialog that makes it easy to start new ASP.NET MVC 3 projects from templates. Improved Add->View Scaffolding support that enables the generation of even cleaner view templates. New ViewBag property that uses .NET 4’s dynamic support to make it easy to pass late-bound data from Controllers to Views. Global Filters support that allows specifying cross-cutting filter attributes (like [HandleError]) across all Controllers within an app. New [AllowHtml] attribute that allows for more granular request validation when binding form posted data to models. Sessionless controller support that allows fine grained control over whether SessionState is enabled on a Controller. New ActionResult types like HttpNotFoundResult and RedirectPermanent for common HTTP scenarios. New Html.Raw() helper to indicate that output should not be HTML encoded. New Crypto helpers for salting and hashing passwords. And much, much more… Learn More about ASP.NET MVC 3 We will be posting lots of tutorials and samples on the http://asp.net/mvc site in the weeks ahead. Below are two good ASP.NET MVC 3 tutorials available on the site today: Build your First ASP.NET MVC 3 Application: VB and C# Building the ASP.NET MVC 3 Music Store We’ll post additional ASP.NET MVC 3 tutorials and videos on the http://asp.net/mvc site in the future. Visit it regularly to find new tutorials as they are published. How to Upgrade Existing Projects ASP.NET MVC 3 is compatible with ASP.NET MVC 2 – which means it should be easy to update existing MVC projects to ASP.NET MVC 3. The new features in ASP.NET MVC 3 build on top of the foundational work we’ve already done with the MVC 1 and MVC 2 releases – which means that the skills, knowledge, libraries, and books you’ve acquired are all directly applicable with the MVC 3 release. MVC 3 adds new features and capabilities – it doesn’t obsolete existing ones. You can upgrade existing ASP.NET MVC 2 projects by following the manual upgrade steps in the release notes. Alternatively, you can use this automated ASP.NET MVC 3 upgrade tool to easily update your existing projects. Localized Builds Today’s ASP.NET MVC 3 release is available in English. We will be releasing localized versions of ASP.NET MVC 3 (in 9 languages) in a few days. I’ll blog pointers to the localized downloads once they are available. NuGet Today we are also shipping NuGet – a free, open source, package manager that makes it easy for you to find, install, and use open source libraries in your projects. It works with all .NET project types (including ASP.NET Web Forms, ASP.NET MVC, WPF, WinForms, Silverlight, and Class Libraries). You can download and install it here. NuGet enables developers who maintain open source projects (for example, .NET projects like Moq, NHibernate, Ninject, StructureMap, NUnit, Windsor, Raven, Elmah, etc) to package up their libraries and register them with an online gallery/catalog that is searchable. The client-side NuGet tools – which include full Visual Studio integration – make it trivial for any .NET developer who wants to use one of these libraries to easily find and install it within the project they are working on. NuGet handles dependency management between libraries (for example: library1 depends on library2). It also makes it easy to update (and optionally remove) libraries from your projects later. It supports updating web.config files (if a package needs configuration settings). It also allows packages to add PowerShell scripts to a project (for example: scaffold commands). Importantly, NuGet is transparent and clean – and does not install anything at the system level. Instead it is focused on making it easy to manage libraries you use with your projects. Our goal with NuGet is to make it as simple as possible to integrate open source libraries within .NET projects. NuGet Gallery This week we also launched a beta version of the http://nuget.org web-site – which allows anyone to easily search and browse an online gallery of open source packages available via NuGet. The site also now allows developers to optionally submit new packages that they wish to share with others. You can learn more about how to create and share a package here. There are hundreds of open-source .NET projects already within the NuGet Gallery today. We hope to have thousands there in the future. IIS Express 7.5 Today we are also shipping IIS Express 7.5. IIS Express is a free version of IIS 7.5 that is optimized for developer scenarios. It works for both ASP.NET Web Forms and ASP.NET MVC project types. We think IIS Express combines the ease of use of the ASP.NET Web Server (aka Cassini) currently built-into Visual Studio today with the full power of IIS. Specifically: It’s lightweight and easy to install (less than 5Mb download and a quick install) It does not require an administrator account to run/debug applications from Visual Studio It enables a full web-server feature set – including SSL, URL Rewrite, and other IIS 7.x modules It supports and enables the same extensibility model and web.config file settings that IIS 7.x support It can be installed side-by-side with the full IIS web server as well as the ASP.NET Development Server (they do not conflict at all) It works on Windows XP and higher operating systems – giving you a full IIS 7.x developer feature-set on all Windows OS platforms IIS Express (like the ASP.NET Development Server) can be quickly launched to run a site from a directory on disk. It does not require any registration/configuration steps. This makes it really easy to launch and run for development scenarios. You can also optionally redistribute IIS Express with your own applications if you want a lightweight web-server. The standard IIS Express EULA now includes redistributable rights. Visual Studio 2010 SP1 adds support for IIS Express. Read my VS 2010 SP1 and IIS Express blog post to learn more about what it enables. SQL Server Compact Edition 4 Today we are also shipping SQL Server Compact Edition 4 (aka SQL CE 4). SQL CE is a free, embedded, database engine that enables easy database storage. No Database Installation Required SQL CE does not require you to run a setup or install a database server in order to use it. You can simply copy the SQL CE binaries into the \bin directory of your ASP.NET application, and then your web application can use it as a database engine. No setup or extra security permissions are required for it to run. You do not need to have an administrator account on the machine. Just copy your web application onto any server and it will work. This is true even of medium-trust applications running in a web hosting environment. SQL CE runs in-memory within your ASP.NET application and will start-up when you first access a SQL CE database, and will automatically shutdown when your application is unloaded. SQL CE databases are stored as files that live within the \App_Data folder of your ASP.NET Applications. Works with Existing Data APIs SQL CE 4 works with existing .NET-based data APIs, and supports a SQL Server compatible query syntax. This means you can use existing data APIs like ADO.NET, as well as use higher-level ORMs like Entity Framework and NHibernate with SQL CE. This enables you to use the same data programming skills and data APIs you know today. Supports Development, Testing and Production Scenarios SQL CE can be used for development scenarios, testing scenarios, and light production usage scenarios. With the SQL CE 4 release we’ve done the engineering work to ensure that SQL CE won’t crash or deadlock when used in a multi-threaded server scenario (like ASP.NET). This is a big change from previous releases of SQL CE – which were designed for client-only scenarios and which explicitly blocked running in web-server environments. Starting with SQL CE 4 you can use it in a web-server as well. There are no license restrictions with SQL CE. It is also totally free. Tooling Support with VS 2010 SP1 Visual Studio 2010 SP1 adds support for SQL CE 4 and ASP.NET Projects. Read my VS 2010 SP1 and SQL CE 4 blog post to learn more about what it enables. Web Deploy and Web Farm Framework 2.0 Today we are also releasing Microsoft Web Deploy V2 and Microsoft Web Farm Framework V2. These services provide a flexible and powerful way to deploy ASP.NET applications onto either a single server, or across a web farm of machines. You can learn more about these capabilities from my previous blog posts on them: Introducing the Microsoft Web Farm Framework Automating Deployment with Microsoft Web Deploy Visit the http://iis.net website to learn more and install them. Both are free. Orchard 1.0 Today we are also releasing Orchard v1.0. Orchard is a free, open source, community based project. It provides Content Management System (CMS) and Blogging System support out of the box, and makes it possible to easily create and manage web-sites without having to write code (site owners can customize a site through the browser-based editing tools built-into Orchard). Read these tutorials to learn more about how you can setup and manage your own Orchard site. Orchard itself is built as an ASP.NET MVC 3 application using Razor view templates (and by default uses SQL CE 4 for data storage). Developers wishing to extend an Orchard site with custom functionality can open and edit it as a Visual Studio project – and add new ASP.NET MVC Controllers/Views to it. WebMatrix 1.0 WebMatrix is a new, free, web development tool from Microsoft that provides a suite of technologies that make it easier to enable website development. It enables a developer to start a new site by browsing and downloading an app template from an online gallery of web applications (which includes popular apps like Umbraco, DotNetNuke, Orchard, WordPress, Drupal and Joomla). Alternatively it also enables developers to create and code web sites from scratch. WebMatrix is task focused and helps guide developers as they work on sites. WebMatrix includes IIS Express, SQL CE 4, and ASP.NET - providing an integrated web-server, database and programming framework combination. It also includes built-in web publishing support which makes it easy to find and deploy sites to web hosting providers. You can learn more about WebMatrix from my Introducing WebMatrix blog post this summer. Visit http://microsoft.com/web to download and install it today. Summary I’m really excited about today’s releases – they provide a bunch of additional value that makes web development with ASP.NET, Visual Studio and the Microsoft Web Server a lot better. A lot of folks worked hard to share this with you today. On behalf of my whole team – we hope you enjoy them! Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

Sending mail with Gmail Account using System.Net.Mail in ASP.NET

- by Jalpesh P. Vadgama

Any web application is in complete without mail functionality you should have to write send mail functionality. Like if there is shopping cart application for example then when a order created on the shopping cart you need to send an email to administrator of website for Order notification and for customer you need to send an email of receipt of order. So any web application is not complete without sending email. This post is also all about sending email. In post I will explain that how we can send emails from our Gmail Account without purchasing any smtp server etc. There are some limitations for sending email from Gmail Account. Please note following things. Gmail will have fixed number of quota for sending emails per day. So you can not send more then that emails for the day. Your from email address always will be your account email address which you are using for sending email. You can not send an email to unlimited numbers of people. Gmail ant spamming policy will restrict this. Gmail provide both Popup and SMTP settings both should be active in your account where you testing. You can enable that via clicking on setting link in gmail account and go to Forwarding and POP/Imap. So if you are using mail functionality for limited emails then Gmail is Best option. But if you are sending thousand of email daily then it will not be Good Idea. Here is the code for sending mail from Gmail Account. using System.Net.Mail; namespace Experiement { public partial class WebForm1 : System.Web.UI.Page { protected void Page_Load(object sender,System.EventArgs e) { MailMessage mailMessage = new MailMessage(new MailAddress("[email protected]") ,new MailAddress("[email protected]")); mailMessage.Subject = "Sending mail through gmail account"; mailMessage.IsBodyHtml = true; mailMessage.Body = "<B>Sending mail thorugh gmail from asp.net</B>"; System.Net.NetworkCredential networkCredentials = new System.Net.NetworkCredential("[email protected]", "yourpassword"); SmtpClient smtpClient = new SmtpClient(); smtpClient.EnableSsl = true; smtpClient.UseDefaultCredentials = false; smtpClient.Credentials = networkCredentials; smtpClient.Host = "smtp.gmail.com"; smtpClient.Port = 587; smtpClient.Send(mailMessage); Response.Write("Mail Successfully sent"); } } } That’s run this application and you will get like below in your account. Technorati Tags: Gmail,System.NET.Mail,ASP.NET

Read the article

Uninstalling Reporting Server 2008 on Windows Server 2008

- by Piotr Rodak

Ha. I had quite disputable pleasure of installing and reinstalling and reinstalling and reinstalling – I think about 5 times before it worked – Reporting Server 2008 on Windows Server with the same year number in name. During my struggle I came across an error which seems to be not quite unfamiliar to some more unfortunate developers and admins who happen to uninstall SSRS 2008 from the server. I had the SSRS 2008 installed as named instance, SQL2008. I wanted to uninstall the server and install it to default instance. And this is when it bit me – not the first time and not the last that day . The setup complained that it couldn’t access a DLL: Error message: TITLE: Microsoft SQL Server 2008 Setup ------------------------------ The following error has occurred: Access to the path 'C:\Windows\SysWOW64\perf-ReportServer$SQL2008-rsctr.dll' is denied. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x60797DC7%25400x84E8D3C0 ------------------------------ BUTTONS: OK This is a screenshot that shows the above error: This issue seems to have a bit of literature dedicated to it and even seemingly a KB article http://support.microsoft.com/kb/956173 and a similar Connect item: http://connect.microsoft.com/SQLServer/feedback/details/363653/error-messages-when-upgrading-from-sql-2008-rc0-to-rtm The article describes issue as following: When you try to uninstall Microsoft SQL Server 2008 Reporting Services from the server, you may receive the following error message: An error has occurred: Access to the path 'Drive_Letter:\WINDOWS\system32\perf-ReportServer-rsctr.dll' is denied. Note Drive_Letter refers to the disc drive into which the SQL Server installation media is inserted. In my case, the Note was not true; the error pointed to a dll that was located in Windows folder on C:\, not where the installation media were. Despite this difference I tried to identify any processes that might be keeping lock on the dll. I downloaded Sysinternals process explorer and ran it to find any processes I could stop. Unfortunately, there was no such process. I tried to rerun the installation, but it failed at the same step. Eventually I decided to remove the dll before the setup was executed. I changed name of the dll to be able to restore it in case of some issues. Interestingly, Windows let me do it, which means that indeed, it was not locked by any process. I ran the setup and this time it uninstalled the instance without any problems: To summarize my experience I should say – be very careful, don’t leave any leftovers after uninstallation – remove/rename any folders that are left after setup has finished. For some reason, setup doesn’t remove folders and certain files. Installation on Windows Server 2008 requires more attention than on Windows 2003 because of the changed security model, some actions can be executed only by administrator in elevated execution mode. In general, you have to get used to UAC and a bit different experience than with Windows Server 2003. Technorati Tags: SQL Server 2008,Windows Server 2008,SRS,Reporting Services

Read the article

Using jQuery, CKEditor, AJAX in ASP.NET MVC 2

- by Ray Linder

After banging my head for days on a “A potentially dangerous Request.Form value was detected" issue when post (ajax-ing) a form in ASP.NET MVC 2 on .NET 4.0 framework using jQuery and CKEditor, I found that when you use the following: Code Snippet $.ajax({ url: '/TheArea/Root/Add', type: 'POST', data: $("#form0Add").serialize(), dataType: 'json', //contentType: 'application/json; charset=utf-8', beforeSend: function () { pageNotify("NotifyMsgContentDiv", "MsgDefaultDiv", '<img src="/Content/images/content/icons/busy.gif" /> Adding post, please wait...', 300, "", true); $("#btnAddSubmit").val("Please wait...").addClass("button-disabled").attr("disabled", "disabled"); }, success: function (data) { $("#btnAddSubmit").val("Add New Post").removeClass("button-disabled").removeAttr('disabled'); redirectToUrl("/Exhibitions"); }, error: function () { pageNotify("NotifyMsgContentDiv", "MsgErrorDiv", '<img src="/Content/images/content/icons/cross.png" /> Could not add post. Please try again or contact your web administrator.', 6000, "normal"); $("#btnAddSubmit").val("Add New Post").removeClass("button-disabled").removeAttr('disabled'); } }); Notice the following: Code Snippet data: $("#form0Add").serialize(), You may run into the “A potentially dangerous Request.Form value was detected" issue with this. One of the requirements was NOT to disable ValidateRequest (ValidateRequest=”false”). For this project (and any other project) I felt it wasn’t necessary to disable ValidateRequest. Note: I’ve search for alternatives for the posting issue and everyone and their mothers continually suggested to disable ValidateRequest. That bothers me – a LOT. So, disabling ValidateRequest is totally out of the question (and always will be). So I thought to modify how the “data: “ gets serialized. the ajax data fix was simple, add a .html(). YES!!! IT WORKS!!! No more “potentially dangerous” issue, ajax form posts (and does it beautifully)! So if you’re using jQuery to $.ajax() a form with CKEditor, remember to do: Code Snippet data: $("#form0Add").serialize().html(), or bad things will happen. Also, don’t forget to set Code Snippet config.htmlEncodeOutput = true; for the CKEditor config.js file (or equivalent). Example: Code Snippet CKEDITOR.editorConfig = function( config ) { // Define changes to default configuration here. For example: // config.language = 'fr'; config.uiColor = '#ccddff'; config.width = 640; config.ignoreEmptyParagraph = true; config.resize_enabled = false; config.skin = 'kama'; config.enterMode = CKEDITOR.ENTER_BR; config.toolbar = 'MyToolbar'; config.toolbar_MyToolbar = [ ['Bold', 'Italic', 'Underline'], ['JustifyLeft', 'JustifyCenter', 'JustifyRight', 'JustifyBlock', 'Font', 'FontSize', 'TextColor', 'BGColor'], ['BulletedList', 'NumberedList', '-', 'Outdent', 'Indent'], '/', ['Scayt', '-', 'Cut', 'Copy', 'Paste', 'Find'], ['Undo', 'Redo'], ['Link', 'Unlink', 'Anchor', 'Image', 'Flash', 'HorizontalRule'], ['Table'], ['Preview', 'Source'] ]; config.htmlEncodeOutput = true; }; Happy coding!!! Tags: jQuery ASP.NET MVC 2 ASP.NET 4.0 AJAX

Read the article

OpenVPN not connecting

- by LandArch

There have been a number of post similar to this, but none seem to satisfy my need. Plus I am a Ubuntu newbie. I followed this tutorial to completely set up OpenVPN on Ubuntu 12.04 server. Here is my server.conf file ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) local 192.168.13.8 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? proto tcp ;proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "/etc/openvpn/ca.crt" cert "/etc/openvpn/server.crt" key "/etc/openvpn/server.key" # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. ;server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. server-bridge 192.168.13.101 255.255.255.0 192.168.13.105 192.168.13.200 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.13.1 255.255.255.0" push "dhcp-option DNS 192.168.13.201" push "dhcp-option DOMAIN blahblah.dyndns-wiki.com" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. user nobody group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I am using Windows 7 as the Client and set that up accordingly using the OpenVPN GUI. That conf file is as follows: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. proto tcp ;proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. blahblah.dyndns-wiki.com 1194 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) user nobody group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\OpenVPN\config\\ca.crt" cert "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.crt" key "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Not sure whats left to do.

Read the article

Using an alternate search platform in Commerce Server 2009

- by Lewis Benge

Although Microsoft Commerce Server 2009's architecture is built upon Microsoft SQL Server, and has the full power of the SQL Full Text Indexing Search Platform, there are time however when you may require a richer or alternate search platform. One of these scenarios if when you want to implement a faceted (refinement) search into your site, which provides dynamic refinements based on the search results dataset. Faceted search is becoming popular in most online retail environments as a way of providing an enhanced user experience when browsing a larger catalogue. This is powerful for two reasons, firstly with a traditional search it is down to a user to think of a search term suitable for the product they are trying to find. This typically will not return similar products or help in any way to refine a larger dataset. Faceted searches on the other hand provide a comprehensive list of product properties, grouped together by similarity to help the user narrow down the results returned, as the user progressively restricts the search criteria by selecting additional criteria to search again, these facets needs to continually refresh. The whole experience allows users to explore alternate brands, price-ranges, or find products they hadn't initially thought of or where looking for in a bid to enhance cross sell in the retail environment. The second advantage of this type of search from a business perspective is also to harvest the search result to start to profile your user. Even though anonymous users may routinely visit your site, and will not necessarily register or complete a transaction to build up marketing data- profiling, you can still achieve the same result by recording search facets used within the search sequence. Below is a faceted search scenario generated from eBay using the search term "server". By creating a search profile of clicking through Computer & Networking -> Servers -> Dell - > New and recording this information against my user profile you can start to predict with a lot more certainty what types of products I am interested in. This will allow you to apply shopping-cart analysis against your search data and provide great cross-sale or advertising opportunity, or personalise the user experience based on your prediction of what the user may be interested in. This type of search is extremely beneficial in e-Commerce environments but achieving it out of the box with Commerce Server and SQL Full Text indexing can be challenging. In many deployments it is often easier to use an alternate search platform such as Microsoft's FAST, Apache SOLR, or Endecca, however you still want these products to integrate natively into Commerce Server to ensure that up-to-date inventory information is presented, profile information is generated, and you provide a consistant API. To do so we make the most of the Commerce Server extensibilty points called operation sequence components. In this example I will be talking about Apache Solr hosted on Apache Tomcat, in this specific example I have used the SolrNet C# library to interface to the Java platform. Also I am not going to talk about Solr configuration of indexing – but in a production envionrment this would typically happen by using Powershell to call the Commerce Server management webservice to export your catalog as XML, apply an XSLT transform to the file to make it conform to SOLR and use a simple HTTP Post to send it to the search enginge for indexing. Essentially a sequance component is a step in a serial workflow used to call a data repository (which in most cases is usually the Commerce Server pipelines or databases) and map to and from a Commerce Entity object whilst enforcing any business rules. So the first step in the process is to add a new class library to your existing Commerce Server site. You will need to use a new library as Sequence Components will need to be strongly named to be deployed. Once you are inside of your new project, add a new class file and add a reference to the Microsoft.Commerce.Providers, Microsoft.Commerce.Contracts and the Microsoft.Commerce.Broker assemblies. Now make your new class derive from the base object Microsoft.Commerce.Providers.Components.OperationSequanceComponent and overide the ExecuteQueryMethod. Your screen will then look something similar ot this: As all we are doing on this component is conducting a search we are only interested in the ExecuteQuery method. This method accepts three arguments, queryOperation, operationCache, and response. The queryOperation will be the object in which we receive our search parameters, the cache allows access to the Commerce Server cache allowing us to store regulary accessed information, and the response object is the object which we will return the result of our search upon. Inside this method is simply where we are going to inject our logic for our third party search platform. As I am not going to explain the inner-workings of actually making a SOLR call, I'll simply provide the sample code here. I would highly recommend however looking at the SolrNet wiki as they have some great explinations of how the API works. What you will find however is that there are some further extensions required when attempting to integrate a custom search provider. Firstly you out of the box the CommerceQueryOperation you will receive into the method when conducting a search against a catalog is specifically geared towards a SQL Full Text Search with properties such as a Where clause. To make the operation you receive more relevant you will need to create another class, this time derived from Microsoft.Commerce.Contract.Messages.CommerceSearchCriteria and within this you need to detail the properties you will require to allow you to submit as parameters to the SOLR search API. My exmaple looks like this: [DataContract(Namespace = "http://schemas.microsoft.com/microsoft-multi-channel-commerce-foundation/types/2008/03")] public class CommerceCatalogSolrSearch : CommerceSearchCriteria { private Dictionary<string, string> _facetQueries; public CommerceCatalogSolrSearch() { _facetQueries = new Dictionary<String, String>(); } public Dictionary<String, String> FacetQueries { get { return _facetQueries; } set { _facetQueries = value; } } public String SearchPhrase{ get; set; } public int PageIndex { get; set; } public int PageSize { get; set; } public IEnumerable<String> Facets { get; set; } public string Sort { get; set; } public new int FirstItemIndex { get { return (PageIndex-1)*PageSize; } } public int LastItemIndex { get { return FirstItemIndex + PageSize; } } } To allow you to construct a CommerceQueryOperation call within the API you will also need to construct another class to derived from Microsoft.Commerce.Common.MessageBuilders.CommerceSearchCriteriaBuilder and is simply used to construct an instance of the CommerceQueryOperation you have just created and expose the properties you want set. My Message builder looks like this: public class CommerceCatalogSolrSearchBuilder : CommerceSearchCriteriaBuilder { private CommerceCatalogSolrSearch _solrSearch; public CommerceCatalogSolrSearchBuilder() { _solrSearch = new CommerceCatalogSolrSearch(); } public String SearchPhrase { get { return _solrSearch.SearchPhrase; } set { _solrSearch.SearchPhrase = value; } } public int PageIndex { get { return _solrSearch.PageIndex; } set { _solrSearch.PageIndex = value; } } public int PageSize { get { return _solrSearch.PageSize; } set { _solrSearch.PageSize = value; } } public Dictionary<String,String> FacetQueries { get { return _solrSearch.FacetQueries; } set { _solrSearch.FacetQueries = value; } } public String[] Facets { get { return _solrSearch.Facets.ToArray(); } set { _solrSearch.Facets = value; } } public override CommerceSearchCriteria ToSearchCriteria() { return _solrSearch; } } Once you have these two classes in place you can now safely cast the CommerceOperation you receive as an argument of the overidden ExecuteQuery method in the SequenceComponent to the CommerceCatalogSolrSearch operation you have just created, e.g. public CommerceCatalogSolrSearch TryGetSearchCriteria(CommerceOperation operation) { var searchCriteria = operation as CommerceQueryOperation; if (searchCriteria == null) throw new Exception("No search criteria present"); var local = (CommerceCatalogSolrSearch) searchCriteria.SearchCriteria; if (local == null) throw new Exception("Unexpected Search Criteria in Operation"); return local; } Now you have all of your search parameters present, you can go off an call the external search platform API. You will of-course get proprietry objects returned, so the next step in the process is to convert the results being returned back into CommerceEntities. You do this via another extensibility point within the Commerce Server API called translatators. Translators are another separate class, this time derived inheriting the interface Microsoft.Commerce.Providers.Translators.IToCommerceEntityTranslator . As you can imaginge this interface is specific for the conversion of the object TO a CommerceEntity, you will need to implement a separate interface if you also need to go in the opposite direction. If you implement the required method for the interace you will get a single translate method which has a source onkect, destination CommerceEntity, and a collection of properties as arguments. For simplicity sake in this example I have hard-coded the mappings, however best practice would dictate you map the objects using your metadatadefintions.xml file . Once complete your translator would look something like the following: public class SolrEntityTranslator : IToCommerceEntityTranslator { #region IToCommerceEntityTranslator Members public void Translate(object source, CommerceEntity destinationCommerceEntity, CommercePropertyCollection propertiesToReturn) { if (source.GetType().Equals(typeof (SearchProduct))) { var searchResult = (SearchProduct) source; destinationCommerceEntity.Id = searchResult.ProductId; destinationCommerceEntity.SetPropertyValue("DisplayName", searchResult.Title); destinationCommerceEntity.ModelName = "Product"; } } Once you have a translator in place you can then safely map the results of your search platform into Commerce Entities and attach them on to the CommerceResponse object in a fashion similar to this: foreach (SearchProduct result in matchingProducts) { var destinationEntity = new CommerceEntity(_returnModelName); Translator.ToCommerceEntity(result, destinationEntity, _queryOperation.Model.Properties); response.CommerceEntities.Add(destinationEntity); } In SOLR I actually have two objects being returned – a product, and a collection of facets so I have an additional translator for facet (which maps to a custom facet CommerceEntity) and my facet response from SOLR is passed into the Translator helper class seperatley. When all of this is pieced together you have sucessfully completed the extensiblity point coding. You would have created a new OperationSequanceComponent, a custom SearchCritiera object and message builder class, and translators to convert the objects into Commerce Entities. Now you simply need to configure them, and can start calling them in your code. Make sure you sign you assembly, compile it and identiy its signature. Next you need to put this a reference of your new assembly into the Channel.Config configuration file replacing that of the existing SQL Full Text component: You will also need to add your translators to the Translators node of your Channel.Config too: Lastly add any custom CommerceEntities you have developed to your MetaDataDefintions.xml file. Your configuration is now complete, and you should now be able to happily make a call to the Commerce Foundation API, which will act as a proxy to your third party search platform and return back CommerceEntities of your search results. If you require data to be enriched, or logged, or any other logic applied then simply add further sequence components into the OperationSequence (obviously keeping the search response first) to the node of your Channel.Config file. Now to call your code you simply request it as per any other CommerceQuery operation, but taking into account you may be receiving multiple types of CommerceEntity returned: public KeyValuePair<FacetCollection ,List<Product>> DoFacetedProductQuerySearch(string searchPhrase, string orderKey, string sortOrder, int recordIndex, int recordsPerPage, Dictionary<string, string> facetQueries, out int totalItemCount) { var products = new List<Product>(); var query = new CommerceQuery<CatalogEntity, CommerceCatalogSolrSearchBuilder>(); query.SearchCriteria.PageIndex = recordIndex; query.SearchCriteria.PageSize = recordsPerPage; query.SearchCriteria.SearchPhrase = searchPhrase; query.SearchCriteria.FacetQueries = facetQueries; totalItemCount = 0; CommerceResponse response = SiteContext.ProcessRequest(query.ToRequest()); var queryResponse = response.OperationResponses[0] as CommerceQueryOperationResponse; // No results. Return the empty list if (queryResponse != null && queryResponse.CommerceEntities.Count == 0) return new KeyValuePair<FacetCollection, List<Product>>(); totalItemCount = (int)queryResponse.TotalItemCount; // Prepare a multi-operation to retrieve the product variants var multiOperation = new CommerceMultiOperation(); //Add products to results foreach (Product product in queryResponse.CommerceEntities.Where(x => x.ModelName == "Product")) { var productQuery = new CommerceQuery<Product>(Product.ModelNameDefinition); productQuery.SearchCriteria.Model.Id = product.Id; productQuery.SearchCriteria.Model.CatalogId = product.CatalogId; var variantQuery = new CommerceQueryRelatedItem<Variant>(Product.RelationshipName.Variants); productQuery.RelatedOperations.Add(variantQuery); multiOperation.Add(productQuery); } CommerceResponse variantsResponse = SiteContext.ProcessRequest(multiOperation.ToRequest()); foreach (CommerceQueryOperationResponse queryOpResponse in variantsResponse.OperationResponses) { if (queryOpResponse.CommerceEntities.Count() > 0) products.Add(queryOpResponse.CommerceEntities[0]); } //Get facet collection FacetCollection facetCollection = queryResponse.CommerceEntities.Where(x => x.ModelName == "FacetCollection").FirstOrDefault(); return new KeyValuePair<FacetCollection, List<Product>>(facetCollection, products); } ..And that is it – simply a few classes and some configuration will allow you to extend the Commerce Server query operations to call a third party search platform, whilst still maintaing a unifed API in the remainder of your code. This logic stands for any extensibility within CommerceServer, which requires excution in a serial fashioon such as call to LOB systems or web service to validate or enrich data. Feel free to use this example on other applications, and if you have any questions please feel free to e-mail and I'll help out where I can!

Read the article

Oracle WebCenter Portal: Pagelet Producer – What’s New in 11.1.1.6.0 Release

- by kellsey.ruppel

Igor Plyakov, Sr. Principal Product Marketing Manager is back to share what's new in Oracle WebCenter Portal: Pagelet Producer. In February 2012 Oracle released 11g Release 1 (11.1.1.6.0) for WebCenter Portal. Pagelet Producer (aka Ensemble) that came out with this release added support for several new capabilities that are described in this post. As of 11.1.1.5.0 release the Pagelet Producer can expose WSRP and JPDK portlets as pagelets that can then be consumed in any portal or any third-party application that does not have a WSRP consumer. Now Pagelet Producer team is working on simplifying use of pagelets in WebCenter Sites. To expose WSRP portlets a new Producer should be registered with Pagelet Producer which can be done using Enterprise Manager, WLST or the Pagelet Producer Administration Console (for details see Section 25.9 of Administrator’s Guide for Oracle WebCenter Portal). If the producer requires authentication, Pagelet Producer allows you to select and use one of standard WSS token profiles. After registration is finished a new resource is created and automatically populated with pagelets that represent the portlets associated with the WSRP endpoint. For 11.1.1.6.0 release we completed extensive testing of consuming all WebCenter Services that are exposed as WSRP portlets by E2.0 Producer and delivery them as pagelets to WebCenter Interaction portal. In Pagelet Producer 11.1.1.6.0 release we added OpenSocial container that allows consuming gadgets from other OpenSocial containers, e.g. iGoogle, and expose them as pagelets. You can also use Pagelet Producer to host OpenSocial gadgets that could leverage OpenSocial APIs that it supports – People, Activities, Appdata and Pub-Sub features. Note that People and Activities expose the People Connections and Activity Stream from WebCenter Portal, i.e. to use these features Pagelet Producer requires connection to WebCenter Portal schema. Pub-Sub allows leveraging OpenAJAX Hub API for inter-gadget communication. In addition to these major new additions in Pagelet Producer 11.1.1.6.0 release we also extended several functional modules: The Clipping module was extended to support clipping of multiple regions on web resource page and then re-assembly of these separately clipped regions into a single pagelet. The auto-login feature can now be applied to web resources protected with Kerberos authentication; you would find this new functionality handy for consuming SharePoint web parts The logging module now supports full HTTP traffic between the Pagelet Producer and proxied web resource. At last, as the rest of WebCenter Portal stack the Pagelet Producer 11.1.1.6.0 can run on IBM WebSphere Application Server.

Read the article

Built-in GZip/Deflate Compression on IIS 7.x

- by Rick Strahl

IIS 7 improves internal compression functionality dramatically making it much easier than previous versions to take advantage of compression that’s built-in to the Web server. IIS 7 also supports dynamic compression which allows automatic compression of content created in your own applications (ASP.NET or otherwise!). The scheme is based on content-type sniffing and so it works with any kind of Web application framework. While static compression on IIS 7 is super easy to set up and turned on by default for most text content (text/*, which includes HTML and CSS, as well as for JavaScript, Atom, XAML, XML), setting up dynamic compression is a bit more involved, mostly because the various default compression settings are set in multiple places down the IIS –> ASP.NET hierarchy. Let’s take a look at each of the two approaches available: Static Compression Compresses static content from the hard disk. IIS can cache this content by compressing the file once and storing the compressed file on disk and serving the compressed alias whenever static content is requested and it hasn’t changed. The overhead for this is minimal and should be aggressively enabled. Dynamic Compression Works against application generated output from applications like your ASP.NET apps. Unlike static content, dynamic content must be compressed every time a page that requests it regenerates its content. As such dynamic compression has a much bigger impact than static caching. How Compression is configured Compression in IIS 7.x is configured with two .config file elements in the <system.WebServer> space. The elements can be set anywhere in the IIS/ASP.NET configuration pipeline all the way from ApplicationHost.config down to the local web.config file. The following is from the the default setting in ApplicationHost.config (in the %windir%\System32\inetsrv\config forlder) on IIS 7.5 with a couple of small adjustments (added json output and enabled dynamic compression): <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/json" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/atom+xml" enabled="true" /> <add mimeType="application/xaml+xml" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> </httpCompression> <urlCompression doStaticCompression="true" doDynamicCompression="true" /> </system.webServer> </configuration> You can find documentation on the httpCompression and urlCompression keys here respectively: http://msdn.microsoft.com/en-us/library/ms690689%28v=vs.90%29.aspx http://msdn.microsoft.com/en-us/library/aa347437%28v=vs.90%29.aspx The httpCompression Element – What and How to compress Basically httpCompression configures what types to compress and how to compress them. It specifies the DLL that handles gzip encoding and the types of documents that are to be compressed. Types are set up based on mime-types which looks at returned Content-Type headers in HTTP responses. For example, I added the application/json to mime type to my dynamic compression types above to allow that content to be compressed as well since I have quite a bit of AJAX content that gets sent to the client. The UrlCompression Element – Enables and Disables Compression The urlCompression element is a quick way to turn compression on and off. By default static compression is enabled server wide, and dynamic compression is disabled server wide. This might be a bit confusing because the httpCompression element also has a doDynamicCompression attribute which is set to true by default, but the urlCompression attribute by the same name actually overrides it. The urlCompression element only has three attributes: doStaticCompression, doDynamicCompression and dynamicCompressionBeforeCache. The doCompression attributes are the final determining factor whether compression is enabled, so it’s a good idea to be explcit! The default for doDynamicCompression='false”, but doStaticCompression="true"! Static Compression is enabled by Default, Dynamic Compression is not Because static compression is very efficient in IIS 7 it’s enabled by default server wide and there probably is no reason to ever change that setting. Dynamic compression however, since it’s more resource intensive, is turned off by default. If you want to enable dynamic compression there are a few quirks you have to deal with, namely that enabling it in ApplicationHost.config doesn’t work. Setting: <urlCompression doDynamicCompression="true" /> in applicationhost.config appears to have no effect and I had to move this element into my local web.config to make dynamic compression work. This is actually a smart choice because you’re not likely to want dynamic compression in every application on a server. Rather dynamic compression should be applied selectively where it makes sense. However, nowhere is it documented that the setting in applicationhost.config doesn’t work (or more likely is overridden somewhere and disabled lower in the configuration hierarchy). So: remember to set doDynamicCompression=”true” in web.config!!! How Static Compression works Static compression works against static content loaded from files on disk. Because this content is static and not bound to change frequently – such as .js, .css and static HTML content – it’s fairly easy for IIS to compress and then cache the compressed content. The way this works is that IIS compresses the files into a special folder on the server’s hard disk and then reads the content from this location if already compressed content is requested and the underlying file resource has not changed. The semantics of serving an already compressed file are very efficient – IIS still checks for file changes, but otherwise just serves the already compressed file from the compression folder. The compression folder is located at: %windir%\inetpub\temp\IIS Temporary Compressed Files\ApplicationPool\ If you look into the subfolders you’ll find compressed files: These files are pre-compressed and IIS serves them directly to the client until the underlying files are changed. As I mentioned before – static compression is on by default and there’s very little reason to turn that functionality off as it is efficient and just works out of the box. The one tweak you might want to do is to set the compression level to maximum. Since IIS only compresses content very infrequently it would make sense to apply maximum compression. You can do this with the staticCompressionLevel setting on the scheme element: <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> Other than that the default settings are probably just fine. Dynamic Compression – not so fast! By default dynamic compression is disabled and that’s actually quite sensible – you should use dynamic compression very carefully and think about what content you want to compress. In most applications it wouldn’t make sense to compress *all* generated content as it would generate a significant amount of overhead. Scott Fortsyth has a great post that details some of the performance numbers and how much impact dynamic compression has. Depending on how busy your server is you can play around with compression and see what impact it has on your server’s performance. There are also a few settings you can tweak to minimize the overhead of dynamic compression. Specifically the httpCompression key has a couple of CPU related keys that can help minimize the impact of Dynamic Compression on a busy server: dynamicCompressionDisableCpuUsage dynamicCompressionEnableCpuUsage By default these are set to 90 and 50 which means that when the CPU hits 90% compression will be disabled until CPU utilization drops back down to 50%. Again this is actually quite sensible as it utilizes CPU power from compression when available and falling off when the threshold has been hit. It’s a good way some of that extra CPU power on your big servers to use when utilization is low. Again these settings are something you likely have to play with. I would probably set the upper limit a little lower than 90% maybe around 70% to make this a feature that kicks in only if there’s lots of power to spare. I’m not really sure how accurate these CPU readings that IIS uses are as Cpu usage on Web Servers can spike drastically even during low loads. Don’t trust settings – do some load testing or monitor your server in a live environment to see what values make sense for your environment. Finally for dynamic compression I tend to add one Mime type for JSON data, since a lot of my applications send large chunks of JSON data over the wire. You can do that with the application/json content type: <add mimeType="application/json" enabled="true" /> What about Deflate Compression? The default compression is GZip. The documentation hints that you can use a different compression scheme and mentions Deflate compression. And sure enough you can change the compression settings to: <scheme name="deflate" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> to get deflate style compression. The deflate algorithm produces slightly more compact output so I tend to prefer it over GZip but more HTTP clients (other than browsers) support GZip than Deflate so be careful with this option if you build Web APIs. I also had some issues with the above value actually being applied right away. Changing the scheme in applicationhost.config didn’t show up on the site right away. It required me to do a full IISReset to get that change to show up before I saw the change over to deflate compressed content. Content was slightly more compressed with deflate – not sure if it’s worth the slightly less common compression type, but the option at least is available. IIS 7 finally makes GZip Easy In summary IIS 7 makes GZip easy finally, even if the configuration settings are a bit obtuse and the documentation is seriously lacking. But once you know the basic settings I’ve described here and the fact that you can override all of this in your local web.config it’s pretty straight forward to configure GZip support and tweak it exactly to your needs. Static compression is a total no brainer as it adds very little overhead compared to direct static file serving and provides solid compression. Dynamic Compression is a little more tricky as it does add some overhead to servers, so it probably will require some tweaking to get the right balance of CPU load vs. compression ratios. Looking at large sites like Amazon, Yahoo, NewEgg etc. – they all use Related Content Code based ASP.NET GZip Caveats HttpWebRequest and GZip Responses © Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7 ASP.NET

Read the article

Setting up a new Silverlight 4 Project with WCF RIA Services

- by Kevin Grossnicklaus

Many of my clients are actively using Silverlight 4 and RIA Services to build powerful line of business applications. Getting things set up correctly is critical to being to being able to take full advantage of the RIA services plumbing and when developers struggle with the setup they tend to shy away from the solution as a whole. I’m a big proponent of RIA services and wanted to take the opportunity to share some of my experiences in setting up these types of projects. In late 2010 I presented a RIA Services Master Class here in St. Louis, MO through my firm (ArchitectNow) and the information shared in this post was promised during that presentation. One other thing I want to mention before diving in is the existence of a number of other great posts on this subject. I’ve learned a lot from many of them and wanted to call out a few of them. The purpose of my post is to point out some of the gotchas that people get caught up on in the process but I would still encourage you to do as much additional research as you can to find the perfect setup for your needs. Here are a few additional blog posts and articles you should check out on the subject: http://msdn.microsoft.com/en-us/library/ee707351(VS.91).aspx http://adam-thompson.com/post/2010/07/03/Getting-Started-with-WCF-RIA-Services-for-Silverlight-4.aspx Technologies I don’t intend for this post to turn into a full WCF RIA Services tutorial but I did want to point out what technologies we will be using: Visual Studio.NET 2010 Silverlight 4.0 WCF RIA Services for Visual Studio 2010 Entity Framework 4.0 I also wanted to point out that the screenshots came from my personal development box which has a number of additional plug-ins and frameworks loaded so a few of the screenshots might not match 100% with what you see on your own machines. If you do not have Visual Studio 2010 you can download the express version from http://www.microsoft.com/express. The Silverlight 4.0 tools and the WCF RIA Services components are installed via the Web Platform Installer (http://www.microsoft.com/web/download). Also, the examples given in this post are done in C#…sorry to you VB folks but the concepts are 100% identical. Setting up anew RIA Services Project This section will provide a step-by-step walkthrough of setting up a new RIA services project using a shared DLL for server side code and a simple Entity Framework model for data access. All projects are created with the consistent ArchitectNow.RIAServices filename prefix and default namespace. This would be modified to match your companies standards. First, open Visual Studio and open the new project window via File->New->Project. In the New Project window, select the Silverlight folder in the Installed Templates section on the left and select “Silverlight Application” as your project type. Verify your solution name and location are set appropriately. Note that the project name we specified in the example below ends with .Client. This indicates the name which will be given to our Silverlight project. I consider Silverlight a client-side technology and thus use this name to reflect that. Click Ok to continue. During the creation on a new Silverlight 4 project you will be prompted with the following dialog to create a new web ASP.NET web project to host your Silverlight content. As we are demonstrating the setup of a WCF RIA Services infrastructure, make sure the “Enable WCF RIA Services” option is checked and click OK. Obviously, there are some other options here which have an effect on your solution and you are welcome to look around. For our example we are going to leave the ASP.NET Web Application Project selected. If you are interested in having your Silverlight project hosted in an MVC 2 application or a Web Site project these options are available as well. Also, whichever web project type you select, the name can be modified here as well. Note that it defaults to the same name as your Silverlight project with the addition of a .Web suffix. At this point, your full Silverlight 4 project and host ASP.NET Web Application should be created and will now display in your Visual Studio solution explorer as part of a single Visual Studio solution as follows: Now we want to add our WCF RIA Services projects to this same solution. To do so, right-click on the Solution node in the solution explorer and select Add->New Project. In the New Project dialog again select the Silverlight folder under the Visual C# node on the left and, in the main area of the screen, select the WCF RIA Services Class Library project template as shown below. Make sure your project name is set appropriately as well. For the sample below, we will name the project “ArchitectNow.RIAServices.Server.Entities”. The .Server.Entities suffix we use is meant to simply indicate that this particular project will contain our WCF RIA Services entity classes (as you will see below). Click OK to continue. Once you have created the WCF RIA Services Class Library specified above, Visual Studio will automatically add TWO projects to your solution. The first will be an project called .Server.Entities (using our naming conventions) and the other will have the same name with a .Web extension. The full solution (with all 4 projects) is shown in the image below. The .Entities project will essentially remain empty and is actually a Silverlight 4 class library that will contain generated RIA Services domain objects. It will be referenced by our front-end Silverlight project and thus allow for simplified sharing of code between the client and the server. The .Entities.Web project is a .NET 4.0 class library into which we will put our data access code (via Entity Framework). This is our server side code and business logic and the RIA Services plumbing will maintain a link between this project and the front end. Specific entities such as our domain objects and other code we set to be shared will be copied automatically into the .Entities project to be used in both the front end and the back end. At this point, we want to do a little cleanup of the projects in our solution and we will do so by deleting the “Class1.cs” class from both the .Entities project and the .Entities.Web project. (Has anyone ever intentionally named a class “Class1”?) Next, we need to configure a few references to make RIA Services work. THIS IS A KEY STEP THAT CAUSES MANY HEADACHES FOR DEVELOPERS NEW TO THIS INFRASTRUCTURE! Using the Add References dialog in Visual Studio, add a project reference from the *.Client project (our Silverlight 4 client) to the *.Entities project (our RIA Services class library). Next, again using the Add References dialog in Visual Studio, add a project reference from the *.Client.Web project (our ASP.NET host project) to the *.Entities.Web project (our back-end data services DLL). To get to the Add References dialog, simply right-click on the project you with to add a reference to in the Visual Studio solution explorer and select “Add Reference” from the resulting context menu. You will want to make sure these references are added as “Project” references to simplify your future debugging. To reiterate the reference direction using the project names we have utilized in this example thus far: .Client references .Entities and .Client.Web reference .Entities.Web. If you have opted for a different naming convention, then the Silverlight project must reference the RIA Services Silverlight class library and the ASP.NET host project must reference the server-side class library. Next, we are going to add a new Entity Framework data model to our data services project (.Entities.Web). We will do this by right clicking on this project (ArchitectNow.Server.Entities.Web in the above diagram) and selecting Add->New Project. In the New Project dialog we will select ADO.NET Entity Data Model as in the following diagram. For now we will call this simply SampleDataModel.edmx and click OK. It is worth pointing out that WCF RIA Services is in no way tied to the Entity Framework as a means of accessing data and any data access technology is supported (as long as the server side implementation maps to the RIA Services pattern which is a topic beyond the scope of this post). We are using EF to quickly demonstrate the RIA Services concepts and setup infrastructure, as such, I am not providing a database schema with this post but am instead connecting to a small sample database on my local machine. The following diagram shows a simple EF Data Model with two tables that I reverse engineered from a local data store. If you are putting together your own solution, feel free to reverse engineer a few tables from any local database to which you have access. At this point, once you have an EF data model generated as an EDMX into your .Entites.Web project YOU MUST BUILD YOUR SOLUTION. I know it seems strange to call that out but it important that the solution be built at this point for the next step to be successful. Obviously, if you have any build errors, these must be addressed at this point. At this point we will add a RIA Services Domain Service to our .Entities.Web project (our server side code). We will need to right-click on the .Entities.Web project and select Add->New Item. In the Add New Item dialog, select Domain Service Class and verify the name of your new Domain Service is correct (ours is called SampleService.cs in the image below). Next, click "Add”. After clicking “Add” to include the Domain Service Class in the selected project, you will be presented with the following dialog. In it, you can choose which entities from the selected EDMX to include in your services and if they should be allowed to be edited (i.e. inserted, updated, or deleted) via this service. If the “Available DataContext/ObjectContext classes” dropdown is empty, this indicates you have not yes successfully built your project after adding your EDMX. I would also recommend verifying that the “Generate associated classes for metadata” option is selected. Once you have selected the appropriate options, click “OK”. Once you have added the domain service class to the .Entities.Web project, the resulting solution should look similar to the following: Note that in the solution you now have a SampleDataModel.edmx which represents your EF data mapping to your database and a SampleService.cs which will contain a large amount of generated RIA Services code which RIA Services utilizes to access this data from the Silverlight front-end. You will put all your server side data access code and logic into the SampleService.cs class. The SampleService.metadata.cs class is for decorating the generated domain objects with attributes from the System.ComponentModel.DataAnnotations namespace for validation purposes. FINAL AND KEY CONFIGURATION STEP! One key step that causes significant headache to developers configuring RIA Services for the first time is the fact that, when we added the EDMX to the .Entities.Web project for our EF data access, a connection string was generated and placed within a newly generated App.Context file within that project. While we didn’t point it out at the time you can see it in the image above. This connection string will be required for the EF data model to successfully locate it’s data. Also, when we added the Domain Service class to the .Entities.Web project, a number of RIA Services configuration options were added to the same App.Config file. Unfortunately, when we ultimately begin to utilize the RIA Services infrastructure, our Silverlight UI will be making RIA services calls through the ASP.NET host project (i.e. .Client.Web). This host project has a reference to the .Entities.Web project which actually contains the code so all will pass through correctly EXCEPT the fact that the host project will utilize it’s own Web.Config for any configuration settings. For this reason we must now merge all the sections of the App.Config file in the .Entities.Web project into the Web.Config file in the .Client.Web project. I know this is a bit tedious and I wish there were a simpler solution but it is required for our RIA Services Domain Service to be made available to the front end Silverlight project. Much of this manual merge can be achieved by simply cutting and pasting from App.Config into Web.Config. Unfortunately, the <system.webServer> section will exist in both and the contents of this section will need to be manually merged. Fortunately, this is a step that needs to be taken only once per solution. As you add additional data structures and Domain Services methods to the server no additional changes will be necessary to the Web.Config. Next Steps At this point, we have walked through the basic setup of a simple RIA services solution. Unfortunately, there is still a lot to know about RIA services and we have not even begun to take advantage of the plumbing which we just configured (meaning we haven’t even made a single RIA services call). I plan on posting a few more introductory posts over the next few weeks to take us to this step. If you have any questions on the content in this post feel free to reach out to me via this Blog and I’ll gladly point you in (hopefully) the right direction. Resources Prior to closing out this post, I wanted to share a number or resources to help you get started with RIA services. While I plan on posting more on the subject, I didn’t invent any of this stuff and wanted to give credit to the following areas for helping me put a lot of these pieces into place. The books and online resources below will go a long way to making you extremely productive with RIA services in the shortest time possible. The only thing required of you is the dedication to take advantage of the resources available. Books Pro Business Applications with Silverlight 4 http://www.amazon.com/Pro-Business-Applications-Silverlight-4/dp/1430272074/ref=sr_1_2?ie=UTF8&qid=1291048751&sr=8-2 Silverlight 4 in Action http://www.amazon.com/Silverlight-4-Action-Pete-Brown/dp/1935182374/ref=sr_1_1?ie=UTF8&qid=1291048751&sr=8-1 Pro Silverlight for the Enterprise (Books for Professionals by Professionals) http://www.amazon.com/Pro-Silverlight-Enterprise-Books-Professionals/dp/1430218673/ref=sr_1_3?ie=UTF8&qid=1291048751&sr=8-3 Web Content RIA Services http://channel9.msdn.com/Blogs/RobBagby/NET-RIA-Services-in-5-Minutes http://silverlight.net/riaservices/ http://www.silverlight.net/learn/videos/all/net-ria-services-intro/ http://www.silverlight.net/learn/videos/all/ria-services-support-visual-studio-2010/ http://channel9.msdn.com/learn/courses/Silverlight4/SL4BusinessModule2/SL4LOB_02_01_RIAServices http://www.myvbprof.com/MainSite/index.aspx#/zSL4_RIA_01 http://channel9.msdn.com/blogs/egibson/silverlight-firestarter-ria-services http://msdn.microsoft.com/en-us/library/ee707336%28v=VS.91%29.aspx Silverlight www.silverlight.net http://msdn.microsoft.com/en-us/silverlight4trainingcourse.aspx http://channel9.msdn.com/shows/silverlighttv

Read the article

ADNOC talks about 50x increase in performance

- by KLaker

If you are still wondering about how Exadata can revolutionise your business then I would recommend watching this great video which was recorded at this year's OpenWorld. First a little background...The Abu Dhabi National Oil Company for Distribution (ADNOC) is an integrated energy company that was founded in 1973. ADNOC Distribution markets and distributes petroleum products and services within the United Arab Emirates and internationally. As one of the largest and most innovative government-owned petroleum companies in the Arab Gulf, ADNOC Distribution is renowned and respected for the exceptional quality and reliability of its products and services. Its five corporate divisions include more than 200 filling stations (a number that is growing at 8% annually), more than 150 convenience stores, 10 vehicle inspection stations, as well as wholesale and retail sales of bulk fuel, gas, oil, diesel, and lubricants. ADNOC selected Oracle Exadata Database Machine after extensive research because it provided them with a single platform that can run mixed workloads in a single unified machine: "We chose Oracle Exadata Database Machine because it.offered a fully integrated and highly engineered system that was ready to deploy. With our infrastructure running all the same technology, we can operate any type of Oracle Database without restrictions and be prepared for business growth," said Ali Abdul Aziz Al-Ali, IT division manager, ADNOC Distribution. ".....we could consolidate our transaction processing and business intelligence onto one platform. Competing solutions are just not capable of doing that." - Awad Ahmed Ali El-Sidiq, Senior Database Administrator, ADNOC Distribution In this new video Awad Ahmen Ali El Sidddig, Senior DBA at ADNOC, talks about the impact that Exadata has had on his team and the whole business. ADNOC is using our engineered systems to drive and manage all their workloads: from transaction systems to payments system to data warehouse to BI environment. A true Disk-to-Dashboard revolution using Engineered Systems. This engineered approach is delivering 50x improvement in performance with one queries running 100x faster! The IT has even revolutionised some of their data warehouse related processes with the help of Exadata and now jobs that were taking over 4 hours now run in a few minutes. To watch the video click on the image below which will take you to our Oracle YouTube page: (if the above link does not work, click here: http://www.youtube.com/watch?v=zcRpxc6u5Ic) Now that queries are running 100x faster and jobs are completing in minutes not hours, what is next for the IT team at ADNOC? Like many of our customers ADNOC is now looking to take advantage of big data to help them better align their business operations with customer behaviour and customer insights. To help deliver this next level of insight the IT team is looking at the new features in Oracle Database 12c such as the new in-memory feature to deliver even more performance gains. The great news is that Awad Ahmen Ali El Sidddig was awarded DBA of the Year - EMEA within our Data Warehouse Global Leaders programme and you can see the badge for this award pop-up at the start of video. Well done to everyone at ADNOC and thanks for spending the time with us at OOW to create this great video.

Read the article

Oracle Linux Training Calendar

- by Antoinette O'Sullivan

The Oracle Linux System Administrator Curriculum is designed to provide you with the knowledge and skills necessary to effectively administer an Oracle Linux environment. These classes will help you prepare to install, configure, and manage your enterprise Linux environment as well as prepare you for the Oracle Linux Certification. You can take these courses as a: Live-Virtual event: Following the instructor-led classes from your own desk - no travel required. There is an extensive list of events on the schedule to suit different timezones. See full list on http://oracle.com/education/linux. In-Class event: Travel to an education center to take these classes. Below is a sample of in-class events on the schedule: Unix and Linux Essentials: This 3-day class is for those new to the linux operating system. You learn to manage files & directories from the command line, perform remote connections, file transfers & more. Location Date Delivery Language Nairobi, Kenya 3 December 2012 English Riyadh, Saudia Arabia 5 January 2013 English Cape Town, South Africa 9 January 2013 English Durban, South Africa 9 January 2013 English Johannesburg, South Africa 9 January 2013 English Woodmead, South Africa 15 July 2013 English Denver, United States 23 January 2013 English Columbia, United States 2 January 2013 English East Lansing, United States 9 January 2013 English Roseville, United States 1 April 2013 English Morrisville, United States 11 February 2013 English Jakarta, Indonesia 26 December 2012 English Kuala Lumpur, Malaysia 29 January 2013 English Auckland, New Zealand 12 December 2012 English Makati City, Philippines 14 January 2013 English Singapore 13 February 2013 English North Sydney, Australia 4 February 2013 English Brisbane, Australia 29 April 2013 English Melbourne, Australia 29 January 2013 English Oracle Linux System Administration: This 5 day course covers a broad range of Oracle Linux system administration tasks, from installing the operating system to preparing the system for Oracle Database. The course also provides an extensive hands-on experience for key system administration tasks. You will gain comprehensive skills in installing, configuring, and managing an Oracle Linux system as well as insight into ULN, Ksplice and UEK. Location Date Delivery Language Brussels, Belgium 26 November 2012 English Windhof, Luxembourg 17 December 2012 English Utrecht, Netherlands 11 February 2013 Dutch Warsaw, Poland 25 February 2013 Polish Gabarone, Botswana 22 April 2013 English Nairobi, Kenya 10 December 2012 English Johannesburg, South Africa 11 March 2013 English Belmont, CA, United States 11 February 2013 English Irvine, CA, United States 25 March 2013 English Roseville, MN, United States 26 November 2013 English Irving, TX, United States 14 January 2013 English Jakarta, Indonesia 3 December 2012 English Singapore 26 November 2012 English Canberra, Australia 21 January 2013 English Sydney, Australia 21 January 2013 English Melbourne, Australia 11 February 2013 English To test your Oracle Linux System Administration skills, take the Oracle Linux 6 Implementation Essentials Certification Exam. For more information on the Oracle Linux Curriculum or to express interest in additional events, go to http://oracle.com/education/linux.

Read the article

Measuring Social Media Efforts

- by David Dorf

So you're on the bandwagon and you've created a Facebook page, you're tweeting everyday, and maybe you've even got a YouTube channel. Now what? After you put any program in place, you need to measure, set new goals, then execute and this is no different. But how does one measure social media efforts? First, I guess we need some goals. Typical ones might be to acquire customers, engage them, then convert them. So that translates to: Increase Facebook fans and Twitter followers Increase comments/posting and retweets Increase redemption of offers via Facebook and Twitter Counting fans and followers is easy, and tracking the redemption of coupons isn't that hard either, but measuring engagement is a tough one. How do you know whether your fans are reading your posts, and whether your posts have any meaning to them? For Facebook, the fan page administrator has access to analytics called Facebook Insights. There you can check weekly metrics such as total fans, new fans, lost fans, demographics of fans, number of postings, numbers clicks, etc. Not nearly as comprehensive as Google Analytics, but well on its way. For Twitter, getting information is a little tougher. Again, its easy to track followers and you can use tools like TweetMeme to encourage and track retweets. An interesting website called WeFollow tries to measure influence for certain topics. For example, the top three influencers for the topic "retail" are retailweek, retailwire, and retailerdaily. Other notables are #10 BestBuy, #11 GapOfficial, #12 JeffPR, and #17 OracleRetail. I assume influence is calculated based on number of followers, number of retweets, frequency of tweets, and perhaps depth of dialogs. If you want to get serious about monitoring and measuring social marketing efforts, you'd be wise to invest in a strong tool. Several are listed on this wiki, including big ones like Radian6, Nielsen, Omniture, and Buzzient. Buzzient might be particularly interesting because its integrated with Oracle CRM OnDemand -- see the demo. As always, I'm interested in hearing how others approach goal setting and monitoring of social media efforts, so feel free to post comments.

Read the article

Packing a DBF

- by Tom Hines

I thought my days of dealing with DBFs as a "production data" source were over, but HA (no such luck). I recently had to retrieve, modify and replace some data that needed to be delivered in a DBF file. Everything was fine until I realized / remembered the DBF driver does not ACTUALLY delete records from the data source -- it only marks them for deletion. You are responsible for handling the "chaff" either by using a utility to remove deleted records or by simply ignoring them. If imported into Excel, the marked-deleted records are ignored, but the file size will reflect the extra content. So, I went hunting for a method to "Pack" the records (removing deleted ones and resizing the DBF file) and eventually ran across the FOXPRO driver at ( http://msdn.microsoft.com/en-us/vfoxpro/bb190233.aspx ). Once installed, I changed the DSN in the code to the new one I created in the ODBC Administrator and ran some tests. Using MSQuery, I simply tested the raw SQL command Pack {tablename} and it WORKED! One really neat thing is the PACK command is used like regular SQL instructions; "Pack {tablename}" is all that is needed. It is necessary, however, to close all connections to the database before issuing the PACK command. Here is some C# code for a Pack method. /// <summary> /// Pack the DBF removing all deleted records /// </summary> /// <param name="strTableName">The table to pack</param> /// <param name="strError">output of any errors</param> /// <returns>bool (true if no errors)</returns> public static bool Pack(string strTableName, ref string strError) { bool blnRetVal = true; try { OdbcConnectionStringBuilder csbOdbc = new OdbcConnectionStringBuilder() { Dsn = "PSAP_FOX_DBF" }; string strSQL = "pack " + strTableName; using (OdbcConnection connOdbc = new OdbcConnection(csbOdbc.ToString())) { connOdbc.Open(); OdbcCommand cmdOdbc = new OdbcCommand(strSQL, connOdbc); cmdOdbc.ExecuteNonQuery(); connOdbc.Close(); } } catch (Exception exc) { blnRetVal = false; strError = exc.Message; } return blnRetVal; }

Read the article

Packing a DBF

- by Tom Hines

I thought my days of dealing with DBFs as a "production data" source were over, but HA (no such luck). I recently had to retrieve, modify and replace some data that needed to be delivered in a DBF file. Everything was fine until I realized / remembered the DBF driver does not ACTUALLY delete records from the data source -- it only marks them for deletion. You are responsible for handling the "chaff" either by using a utility to remove deleted records or by simply ignoring them. If imported into Excel, the marked-deleted records are ignored, but the file size will reflect the extra content. After several rounds of testing CRUD, the output DBF was huge. So, I went hunting for a method to "Pack" the records (removing deleted ones and resizing the DBF file) and eventually ran across the FOXPRO driver at ( http://msdn.microsoft.com/en-us/vfoxpro/bb190233.aspx ). Once installed, I changed the DSN in the code to the new one I created in the ODBC Administrator and ran some tests. Using MSQuery, I simply tested the raw SQL command Pack {tablename} and it WORKED! One really neat thing is the PACK command is used like regular SQL instructions; "Pack {tablename}" is all that is needed. It is necessary, however, to close all connections to the database (and re-open) before issuing the PACK command or you will get the "File is in use" error. Here is some C# code for a Pack method. /// <summary> /// Pack the DBF removing all deleted records /// </summary> /// <param name="strTableName">The table to pack</param> /// <param name="strError">output of any errors</param> /// <returns>bool (true if no errors)</returns> public static bool Pack(string strTableName, ref string strError) { bool blnRetVal = true; try { OdbcConnectionStringBuilder csbOdbc = new OdbcConnectionStringBuilder() { Dsn = "PSAP_FOX_DBF" }; string strSQL = "pack " + strTableName; using (OdbcConnection connOdbc = new OdbcConnection(csbOdbc.ToString())) { connOdbc.Open(); OdbcCommand cmdOdbc = new OdbcCommand(strSQL, connOdbc); cmdOdbc.ExecuteNonQuery(); connOdbc.Close(); } } catch (Exception exc) { blnRetVal = false; strError = exc.Message; } return blnRetVal; }

Read the article

How To Personalize the Windows Command Prompt

- by Matthew Guay

Command line interfaces can be downright boring, and always seem to miss out on the fresh coats of paint liberally applied to the rest of Windows. Here’s how to add a splash of color to Command Prompt and make it unique. By default, Windows Command Prompt is white text on a black background. It get’s the job done, but maybe you want to add some color to it. To get an overview of what we can do with the color command, let’s enter: color /? So, to get the color you want, enter color then the option for the background color followed by the font color. For example, let’s make an old-fashioned green on black look by entering: color 02 There are a bunch of different combinations you can do, like this black background with red text. color 04 You can’t mess it up too much. The color command won’t let you set both the font and the background to the same color, which would make it unreadable. Also, if you want to get back to the default settings, just enter: color Now we’re back to plain-old black and white. Personalize Command Prompt Without Commands If you’d prefer to change the color without entering commands, just click on the Command Prompt icon in the top left corner of the window and select Properties. Select the Colors tab, and then choose the color you want for the screen text and background. You can also enter your own RGB color combination if you want. Here we entered the RGB values to get a purple background color like Ubuntu 10.04. Back in the Properties dialog, you can also change your Command Prompt font from the font tab. Choose any font you want, as long as the one you want is one of the three listed here. Customizations you make via the Properties dialog are saved and will be used any time you open Command Prompt, but any customizations you make with the Color command are only for that session. Conclusion Whether you want to make your command prompt bright enough to cause a sunburn or old-style enough to scare a mainframe operator, with these settings, you can make Command Prompt a bit more unique. Similar Articles Productive Geek Tips Use "Command Prompt Here" in Windows VistaVerify the Integrity of Windows Vista System FilesKeyboard Ninja: Scrolling the Windows Command Prompt With Only the KeyboardRun a Command as Administrator from the Windows 7 / Vista Run boxStart an Application Assigned to a Specific CPU in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app

Read the article

Learn about MySQL with the Authentic MySQL for Beginners course

- by Antoinette O'Sullivan

Learn about the MySQL Server and other MySQL products by taking the authentic MySQL for Beginners course. This course covers all the basics from MySQL download and installation, to relational database concepts and database design. This course is your first step to becoming a MySQL administrator. You can take this course through one of the following delivery types: Training-on-Demand: Start the class from your desk, at your base and within 24 hrs of registering. Read Ben Krug on Day 3 of his experience taking the MySQL for Beginners course Training-on-Demand option. Live-Virtual Class: Attend this live class from your own office - no travel required. Choose from a selection of events on the schedule to suit different timezones. Delivery languages include English and German. In-Class event: Attend this class in an education center. Events already on the schedule include: Location Date Delivery Language Mechelen, Belgium 14 January 2013 English London, England 5 March 2013 English Hamburg, Germany 25 March 2013 German Munich, Germany 3 June 2013 German Budapest, Hungary 5 February 2013 Hungary Milan, Italy 11 February 2013 Italian Rome, Italy 4 March 2013 Italian Riga, Latvia 18 February 2013 Latvian Amsterdam, Netherlands 21 May 2013 Dutch Nieuwegein, Netherlands 18 February 2013 Dutch Warsaw, Poland 18 February 2013 Polish Lisbon, Portugal 25 March 2013 European Portugese Porto, Portugal 25 March 2013 European Portugese Barcelona, Spain 11 February 2013 Spanish Madrid, Spain 22 April 2013 Spanish Nairobi, Kenya 14 January 2013 English Capetown, South Africa 22 July 2013 English Pretoria, South Africa 22 April 2013 English Petaling Jaya, Malaysia 28 January 2013 English Ottawa, Canada 25 March 2013 English Toronto, Canada 25 March 2013 English Montreal, Canada 25 March 2013 English Mexico City, Mexico 14 January 2013 Spanish San Pedro Garza Garcia, Mexico 5 February 2013 Spanish Sao Paolo, Brazil 29 January 2013 Brazilian Portugese For more information on this or other courses on the authentic MySQL Curriculum, go to http://oracle.com/education/mysql. Note, many organizations deploy both Oracle Database and MySQL side by side to serve different needs, and as a database professional you can find training courses on both topics at Oracle University! Check out the upcoming Oracle Database training courses and MySQL training courses. Even if you're only managing Oracle Databases at this point of time, getting familiar with MySQL will broaden your career path with growing job demand.

Read the article

Know more about Enqueue Deadlock Detection

- by Liu Maclean(???)

??? ORACLE ALLSTAR???????????????????,??????? ???????enqueue lock?????????3 ??????,????????????????????????????ora-00060 dead lock??process???3s: SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com PROCESS A: set timing on; update maclean1 set t1=t1+1; PROCESS B: update maclean2 set t1=t1+1; PROCESS A: update maclean2 set t1=t1+1; PROCESS B: update maclean1 set t1=t1+1; ??3s? PROCESS A ?? ERROR at line 1: ORA-00060: deadlock detected while waiting for resource Elapsed: 00:00:03.02 ????Process A????????????? 3s,?????????????,??????? ?????????? ???????: SQL> col name for a30 SQL> col value for a5 SQL> col DESCRIB for a50 SQL> set linesize 140 pagesize 1400 SQL> SELECT x.ksppinm NAME, y.ksppstvl VALUE, x.ksppdesc describ 2 FROM SYS.x$ksppi x, SYS.x$ksppcv y 3 WHERE x.inst_id = USERENV ('Instance') 4 AND y.inst_id = USERENV ('Instance') 5 AND x.indx = y.indx 6 AND x.ksppinm='_enqueue_deadlock_scan_secs'; NAME VALUE DESCRIB ------------------------------ ----- -------------------------------------------------- _enqueue_deadlock_scan_secs 0 deadlock scan interval SQL> alter system set "_enqueue_deadlock_scan_secs"=18 scope=spfile; System altered. Elapsed: 00:00:00.01 SQL> startup force; ORACLE instance started. Total System Global Area 851443712 bytes Fixed Size 2100040 bytes Variable Size 738198712 bytes Database Buffers 104857600 bytes Redo Buffers 6287360 bytes Database mounted. Database opened. PROCESS A: SQL> set timing on; SQL> update maclean1 set t1=t1+1; 1 row updated. Elapsed: 00:00:00.06 Process B SQL> update maclean2 set t1=t1+1; 1 row updated. SQL> update maclean1 set t1=t1+1; Process A: SQL> SQL> alter session set events '10704 trace name context forever,level 10:10046 trace name context forever,level 8'; Session altered. SQL> update maclean2 set t1=t1+1; update maclean2 set t1=t1+1 * ERROR at line 1: ORA-00060: deadlock detected while waiting for resource Elapsed: 00:00:18.05 ksqcmi: TX,90011,4a9 mode=6 timeout=21474836 WAIT #12: nam='enq: TX - row lock contention' ela= 2930070 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114759849120 WAIT #12: nam='enq: TX - row lock contention' ela= 2930636 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114762779801 WAIT #12: nam='enq: TX - row lock contention' ela= 2930439 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114765710430 *** 2012-06-12 09:58:43.089 WAIT #12: nam='enq: TX - row lock contention' ela= 2931698 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114768642192 WAIT #12: nam='enq: TX - row lock contention' ela= 2930428 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114771572755 WAIT #12: nam='enq: TX - row lock contention' ela= 2931408 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114774504207 DEADLOCK DETECTED ( ORA-00060 ) [Transaction Deadlock] The following deadlock is not an ORACLE error. It is a deadlock due to user error in the design of an application or from issuing incorrect ad-hoc SQL. The following information may aid in determining the deadlock: ??????Process A?’enq: TX – row lock contention’ ?????ORA-00060 deadlock detected????3s ??? 18s , ???hidden parameter “_enqueue_deadlock_scan_secs”?????,????????0? ??????????: SQL> alter system set "_enqueue_deadlock_scan_secs"=4 scope=spfile; System altered. Elapsed: 00:00:00.01 SQL> alter system set "_enqueue_deadlock_time_sec"=9 scope=spfile; System altered. Elapsed: 00:00:00.00 SQL> startup force; ORACLE instance started. Total System Global Area 851443712 bytes Fixed Size 2100040 bytes Variable Size 738198712 bytes Database Buffers 104857600 bytes Redo Buffers 6287360 bytes Database mounted. Database opened. SQL> set linesize 140 pagesize 1400 SQL> show parameter dead NAME TYPE VALUE ------------------------------------ -------------------------------- ------------------------------ _enqueue_deadlock_scan_secs integer 4 _enqueue_deadlock_time_sec integer 9 SQL> set timing on SQL> select * from maclean1 for update wait 8; T1 ---------- 11 Elapsed: 00:00:00.01 PROCESS B SQL> select * from maclean2 for update wait 8; T1 ---------- 3 SQL> select * from maclean1 for update wait 8; select * from maclean1 for update wait 8 PROCESS A SQL> select * from maclean2 for update wait 8; select * from maclean2 for update wait 8 * ERROR at line 1: ORA-30006: resource busy; acquire with WAIT timeout expired Elapsed: 00:00:08.00 ???????? ??? select for update wait?enqueue request timeout ?????8s? ,???????”_enqueue_deadlock_scan_secs”=4(deadlock scan interval),?4s???deadlock detected,????Process A????deadlock ???, ??????? ??Process A?????8s?raised??”ORA-30006: resource busy; acquire with WAIT timeout expired”??,??ORA-00060,?????process A???????? ????????”_enqueue_deadlock_time_sec”(requests with timeout <= this will not have deadlock detection)???,?enqueue request time < “_enqueue_deadlock_time_sec”?Server process?????dead lock detection,?????????enqueue request ??????timeout??????(_enqueue_deadlock_time_sec????5,?timeout<5s),???????????????;??????timeout>”_enqueue_deadlock_time_sec”???,Oracle????????????????????? ??????????: SQL> show parameter dead NAME TYPE VALUE ------------------------------------ -------------------------------- ------------------------------ _enqueue_deadlock_scan_secs integer 4 _enqueue_deadlock_time_sec integer 9 Process A: SQL> set timing on; SQL> select * from maclean1 for update wait 10; T1 ---------- 11 Process B: SQL> select * from maclean2 for update wait 10; T1 ---------- 3 SQL> select * from maclean1 for update wait 10; PROCESS A: SQL> select * from maclean2 for update wait 10; select * from maclean2 for update wait 10 * ERROR at line 1: ORA-00060: deadlock detected while waiting for resource Elapsed: 00:00:06.02 ??????? select for update wait 10?10s??, ?? 10s?????_enqueue_deadlock_time_sec???(9s),??Process A???????? ???????????????6s ???????_enqueue_deadlock_scan_secs?4s ? ???????????,???????????_enqueue_deadlock_scan_secs?????????3???? ??: enqueue lock?????????????? 1. ?????????deadlock detection??3s????, ????????_enqueue_deadlock_scan_secs(deadlock scan interval)???,??????0,????????_enqueue_deadlock_scan_secs?????????3???, ?_enqueue_deadlock_scan_secs=0 ??3s??, ?_enqueue_deadlock_scan_secs=4??6s??,????? 2. ???????_enqueue_deadlock_time_sec(requests with timeout <= this will not have deadlock detection)???,?enqueue request timeout< _enqueue_deadlock_time_sec(????5),?Server process?????????enqueue request timeout>_enqueue_deadlock_time_sec ????_enqueue_deadlock_scan_secs???????, ??request timeout??????select for update wait [TIMEOUT]??? ??: ???10.2.0.1?????????2?hidden parameter , ???patchset 10.2.0.3????? _enqueue_deadlock_time_sec, ?patchset 10.2.0.5??????_enqueue_deadlock_scan_secs? ?????RAC???????????10s, ???????_lm_dd_interval(dd time interval in seconds) ,????????8.0.6???? ???????????????,??????, ?10g???????60s,?11g???????10s? ???????11g??_lm_dd_interval?????????????,?????11g??LMD????????????,??????????RAC?LMD?Deadlock Detection???????CPU,???11g?Oracle????Team???LMD????????CPU????: ????????11g?LMD???????,???????11g??? UTS TRACE ????? DD???: SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> SQL> select * from global_name 2 ; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> alter system set "_lm_dd_interval"=20 scope=spfile; System altered. SQL> startup force; ORACLE instance started. Total System Global Area 1570009088 bytes Fixed Size 2228704 bytes Variable Size 1325403680 bytes Database Buffers 234881024 bytes Redo Buffers 7495680 bytes Database mounted. Database opened. SQL> set linesize 140 pagesize 1400 SQL> show parameter lm_dd NAME TYPE VALUE ------------------------------------ -------------------------------- ------------------------------ _lm_dd_interval integer 20 SQL> select count(*) from gv$instance; COUNT(*) ---------- 2 instance 1: SQL> oradebug setorapid 12 Oracle pid: 12, Unix process pid: 8608, image: [email protected] (LMD0) ? LMD0??? UTS TRACE??RAC???????????? SQL> oradebug event 10046 trace name context forever,level 8:10708 trace name context forever,level 103: trace[rac.*] disk high; Statement processed. Elapsed: 00:00:00.00 SQL> update maclean1 set t1=t1+1; 1 row updated. instance 2: SQL> update maclean2 set t1=t1+1; 1 row updated. SQL> update maclean1 set t1=t1+1; Instance 1: SQL> update maclean2 set t1=t1+1; update maclean2 set t1=t1+1 * ERROR at line 1: ORA-00060: deadlock detected while waiting for resource Elapsed: 00:00:20.51 LMD0???UTS TRACE 2012-06-12 22:27:00.929284 : [kjmpbmsg:process][type 22][msg 0x7fa620ac85a8][from 1][seq 8148.0][len 192] 2012-06-12 22:27:00.929346 : [kjmxmpm][type 22][seq 0.0][msg 0x7fa620ac85a8][from 1] *** 2012-06-12 22:27:00.929 * kjddind: received DDIND msg with subtype x6 * reqp->dd_master_inst_kjxmddi == 1 * kjddind: dump sgh: 2012-06-12 22:27:00.929346*: kjddind: req->timestamp [0.15], kjddt [0.13] 2012-06-12 22:27:00.929346*: >> DDmsg:KJX_DD_REMOTE,TS[0.15],Inst 1->2,ddxid[id1,id2,inst:2097153,31,1],ddlock[0x95023930,829],ddMasterInst 1 2012-06-12 22:27:00.929346*: lock [0x95023930,829], op = [mast] 2012-06-12 22:27:00.929346*: reqp->timestamp [0.15], kjddt [0.13] 2012-06-12 22:27:00.929346*: kjddind: updated local timestamp [0.15] * kjddind: case KJX_DD_REMOTE 2012-06-12 22:27:00.929346*: ADD IO NODE WFG: 0 frame pointer 2012-06-12 22:27:00.929346*: PUSH: type=res, enqueue(0xffffffff.0xffffffff)=0xbbb9af40, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: PROCESS: type=res, enqueue(0xffffffff.0xffffffff)=0xbbb9af40, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: POP: type=res, enqueue(0xffffffff.0xffffffff)=0xbbb9af40, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: kjddopr[TX 0xe000c.0x32][ext 0x5,0x0]: blocking lock 0xbbb9a800, owner 2097154 of inst 2 2012-06-12 22:27:00.929346*: PUSH: type=txn, enqueue(0xffffffff.0xffffffff)=0xbbb9a800, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: PROCESS: type=txn, enqueue(0xffffffff.0xffffffff)=0xbbb9a800, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: ADD NODE TO WFG: type=txn, enqueue(0xffffffff.0xffffffff)=0xbbb9a800, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: POP: type=txn, enqueue(0xffffffff.0xffffffff)=0xbbb9a800, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: kjddopt: converting lock 0xbbce92f8 on 'TX' 0x80016.0x5d4,txid [2097154,34]of inst 2 2012-06-12 22:27:00.929346*: PUSH: type=res, enqueue(0xffffffff.0xffffffff)=0xbbce92f8, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: PROCESS: type=res, enqueue(0xffffffff.0xffffffff)=0xbbce92f8, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: ADD NODE TO WFG: type=res, enqueue(0xffffffff.0xffffffff)=0xbbce92f8, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929855 : GSIPC:AMBUF: rcv buff 0x7fa620aa8cd8, pool rcvbuf, rqlen 1102 2012-06-12 22:27:00.929878 : GSIPC:GPBMSG: new bmsg 0x7fa620aa8d48 mb 0x7fa620aa8cd8 msg 0x7fa620aa8d68 mlen 192 dest x100 flushsz -1 2012-06-12 22:27:00.929878*: << DDmsg:KJX_DD_REMOTE,TS[0.15],Inst 2->1,ddxid[id1,id2,inst:2097153,31,1],ddlock[0x95023930,829],ddMasterInst 1 2012-06-12 22:27:00.929878*: lock [0xbbce92f8,287], op = [mast] 2012-06-12 22:27:00.929878*: ADD IO NODE WFG: 0 frame pointer 2012-06-12 22:27:00.929923 : [kjmpbmsg:compl][msg 0x7fa620ac8588][typ p][nmsgs 1][qtime 0][ptime 0] 2012-06-12 22:27:00.929947 : GSIPC:PBAT: flush start. flag 0x79 end 0 inc 4.4 2012-06-12 22:27:00.929963 : GSIPC:PBAT: send bmsg 0x7fa620aa8d48 blen 224 dest 1.0 2012-06-12 22:27:00.929979 : GSIPC:SNDQ: enq msg 0x7fa620aa8d48, type 65521 seq 8325, inst 1, receiver 0, queued 1 012-06-12 22:27:00.929979 : GSIPC:SNDQ: enq msg 0x7fa620aa8d48, type 65521 seq 8325, inst 1, receiver 0, queued 1 2012-06-12 22:27:00.929996 : GSIPC:BSEND: flushing sndq 0xb491dd28, id 0, dcx 0xbc517770, inst 1, rcvr 0 qlen 0 1 2012-06-12 22:27:00.930014 : GSIPC:BSEND: no batch1 msg 0x7fa620aa8d48 type 65521 len 224 dest (1:0) 2012-06-12 22:27:00.930088 : kjbsentscn[0x0.3f72dc][to 1] 2012-06-12 22:27:00.930144 : GSIPC:SENDM: send msg 0x7fa620aa8d48 dest x10000 seq 8325 type 65521 tkts x1 mlen xe00110 2012-06-12 22:27:00.930531 : GSIPC:KSXPCB: msg 0x7fa620aa8d48 status 30, type 65521, dest 1, rcvr 0 WAIT #0: nam='ges remote message' ela= 1372 waittime=80 loop=0 p3=74 obj#=-1 tim=1339554420931640 2012-06-12 22:27:00.931728 : GSIPC:RCVD: ksxp msg 0x7fa620af6490 sndr 1 seq 0.8149 type 65521 tkts 1 2012-06-12 22:27:00.931746 : GSIPC:RCVD: watq msg 0x7fa620af6490 sndr 1, seq 8149, type 65521, tkts 1 2012-06-12 22:27:00.931763 : GSIPC:RCVD: seq update (0.8148)->(0.8149) tp -15 fg 0x4 from 1 pbattr 0x0 2012-06-12 22:27:00.931779 : GSIPC:TKT: collect msg 0x7fa620af6490 from 1 for rcvr 0, tickets 1 2012-06-12 22:27:00.931794 : kjbrcvdscn[0x0.3f72dc][from 1][idx 2012-06-12 22:27:00.931810 : kjbrcvdscn[no bscn dd_master_inst_kjxmddi == 1 * kjddind: dump sgh: NXTIN (nil) 0 wq 0 cvtops x0 0x0.0x0(ext 0x0,0x0)[0000-0000-00000000] inst 1 BLOCKER 0xbbb9a800 5 wq 1 cvtops x28 TX 0xe000c.0x32(ext 0x5,0x0)[20000-0002-00000022] inst 2 BLOCKED 0xbbce92f8 5 wq 2 cvtops x1 TX 0x80016.0x5d4(ext 0x2,0x0)[20000-0002-00000022] inst 2 NXTOUT (nil) 0 wq 0 cvtops x0 0x0.0x0(ext 0x0,0x0)[0000-0000-00000000] inst 1 2012-06-12 22:27:00.932058*: kjddind: req->timestamp [0.15], kjddt [0.15] 2012-06-12 22:27:00.932058*: >> DDmsg:KJX_DD_VALIDATE,TS[0.15],Inst 1->2,ddxid[id1,id2,inst:2097153,31,1],ddlock[0x95023930,829],ddMasterInst 1 2012-06-12 22:27:00.932058*: lock [(nil),0], op = [vald_dd] 2012-06-12 22:27:00.932058*: kjddind: updated local timestamp [0.15] * kjddind: case KJX_DD_VALIDATE *** 2012-06-12 22:27:00.932 * kjddvald called: kjxmddi stuff: * cont_lockp (nil) * dd_lockp 0x95023930 * dd_inst 1 * dd_master_inst 1 * sgh graph: NXTIN (nil) 0 wq 0 cvtops x0 0x0.0x0(ext 0x0,0x0)[0000-0000-00000000] inst 1 BLOCKER 0xbbb9a800 5 wq 1 cvtops x28 TX 0xe000c.0x32(ext 0x5,0x0)[20000-0002-00000022] inst 2 BLOCKED 0xbbce92f8 5 wq 2 cvtops x1 TX 0x80016.0x5d4(ext 0x2,0x0)[20000-0002-00000022] inst 2 NXTOUT (nil) 0 wq 0 cvtops x0 0x0.0x0(ext 0x0,0x0)[0000-0000-00000000] inst 1 POP WFG NODE: lock=(nil) * kjddvald: dump the PRQ: BLOCKER 0xbbb9a800 5 wq 1 cvtops x28 TX 0xe000c.0x32(ext 0x5,0x0)[20000-0002-00000022] inst 2 BLOCKED 0xbbce92f8 5 wq 2 cvtops x1 TX 0x80016.0x5d4(ext 0x2,0x0)[20000-0002-00000022] inst 2 * kjddvald: KJDD_NXTONOD ->node_kjddsg.dinst_kjddnd =1 * kjddvald: ... which is not my node, my subgraph is validated but the cycle is not complete Global blockers dump start:--------------------------------- DUMP LOCAL BLOCKER/HOLDER: block level 5 res [0x80016][0x5d4],[TX][ext 0x2,0x0] ??dead lock!!! ???????11.2.0.3???? RAC LMD???????????”_lm_dd_interval”????????????20s? ???????10g?_lm_dd_interval???60s,??????Processes?????????????????,????????????Server Process????????60s??????11g?????(??????LMD???????)???????,???????????10s??? Enqueue Deadlock Detection? ?11g??? RAC?LMD???????hidden parameter ????”_lm_dd_interval”???,RAC????????????????,???????????: SQL> col name for a50 SQL> col describ for a60 SQL> col value for a20 SQL> set linesize 140 pagesize 1400 SQL> SELECT x.ksppinm NAME, y.ksppstvl VALUE, x.ksppdesc describ 2 FROM SYS.x$ksppi x, SYS.x$ksppcv y 3 WHERE x.inst_id = USERENV ('Instance') 4 AND y.inst_id = USERENV ('Instance') 5 AND x.indx = y.indx 6 AND x.ksppinm like '_lm_dd%'; NAME VALUE DESCRIB -------------------------------------------------- -------------------- ------------------------------------------------------------ _lm_dd_interval 20 dd time interval in seconds _lm_dd_scan_interval 5 dd scan interval in seconds _lm_dd_search_cnt 3 number of dd search per token get _lm_dd_max_search_time 180 max dd search time per token _lm_dd_maxdump 50 max number of locks to be dumped during dd validation _lm_dd_ignore_nodd FALSE if TRUE nodeadlockwait/nodeadlockblock options are ignored 6 rows selected.

Search Results

Search found 19460 results on 779 pages for 'local administrator'.

Page 339/779 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346 | Next Page >

- by KyleBurns

- by gon

- by Jakob Ehn

- by Liu Maclean(???)

- by Rick Strahl

- by Qing

- by Rick Strahl

- by Fredrik N

- by ScottGu

- by Jalpesh P. Vadgama

- by Piotr Rodak

- by Ray Linder

- by LandArch

- by Lewis Benge

- by kellsey.ruppel

- by Rick Strahl

- by Kevin Grossnicklaus

- by KLaker

- by Antoinette O'Sullivan

- by David Dorf

- by Tom Hines

- by Tom Hines

- by Matthew Guay

- by Antoinette O'Sullivan

- by Liu Maclean(???)

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346 | Next Page >