Search Results

Search found 15439 results on 618 pages for 'wls configuration'.

Page 339/618 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• After force-installing a 32-bit deb failed, how can I install the 64-bit version?

  - by TryTryAgain

  I tried to dpkg -i --force-architecture google-earth-stable_i386.deb and it failed. But now when I try to install the amd64.deb it fails saying dpkg: error processing google-earth-stable_current_amd64.deb (--install): google-earth-stable: 6.2.2.6613-r0 (Multi-Arch: no) is not co-installable with google-earth-stable:i386 6.2.2.6613-r0 (Multi-Arch: no) which is currently installed Errors were encountered while processing: google-earth-stable_current_amd64.deb somehow it thinks the i386 version is installed. No google-earth files or directories even exist. sudo dpkg --configure -a outputs: dpkg: dependency problems prevent configuration of google-earth-stable:i386: google-earth-stable:i386 depends on lsb-core (= 3.2). dpkg: error processing google-earth-stable:i386 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: google-earth-stable:i386 so it does exist in some capacity. sudo apt-get -f install does nothing out of the ordinary: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded. The weird thing is that synaptic doesn't show any google earth package available let alone installed, nothing under the broken filter either. I have also tried sudo apt-get autoremove and sudo apt-get autoclean So, my question: How can I get rid of this issue?

  Read the article

• Process for configuring network settings on a headless rack mount device

  - by PherricOxide

  I'm with a small company that plans to sell a rack mounted network appliance which is configurable via a web interface (think of a router configuration page sort of deal), and I'm wondering in large data center like environments what the process usually is for the initial setup of such systems. The main question is, if the system is headless, how do you get initial remote access to it? Do companies usually first plug a server into a monitor/keyboard/mouse in order to configure the network settings before mounting it in a rack? How else would they know what the IP address of the machine was if DHCP (and it can't be hard coded because of IP conflict potential)?

  Read the article

• Ubuntu server failing daily

  - by deanvz

  Symptoms: Server becomes unresponsive - Increase in load, all services stop Loss of connectivity - Ping/SSH Flush MySQL hosts after reboot - As MySQL refuses new connections Intermittent Apache crashes Generally happens early morning hours - 2 days of the week are however excluded Changes made: Updated the OS - to Ubuntu 10.04.4 LTS Not sure if the MySQL server was also updated in the process Current MySQL version - mysql Ver 14.14 Distrib 5.1.63, for debian-linux-gnu (x86_64) using readline 6.1 Updated Plesk from 10.4.4 Update #47 to 11.0.9 Update #23 Rebooted on almost daily basis All crons stopped for the times corresponding to the server crashes Created a MySQL log to monitor the lock times on queries Possible causes: Failing hardware Incorrect software configuration (MySQL, Apache etc) Responsibilities: Small webserver Runs our billing system - WHMCS Responsible for CRONs Bulk-email solution - No delivery times coincide with server crashes Proposed solutions: Move machine over to VM Format and restore the Plesk server backup and take it from there? Side notes: Seems to be a general Apache failure across all our linux servers - Intermittent problem Are we doing something fundamentally wrong in the Apache config? (I understand that this is a secondary question, just making sure that it isnt possibly holding any relevance)

  Read the article

• IIS 7 - Provisioning portal

  - by Doug

  I am wanting to setup our production IIS environments with a provisioning portal to ensure that deployment staff always setup sites in a uniform configuration, and that they don't actually have remote access to the servers directly. What is the best 'simple' provisioning tool for such a purpose? Do people write their own using something like Powershell remoting? I don't want to install a tool like HELM or similar as it feels like it creates unnecessary bloat on top of a production environment. features should include: create new website and app pool combo restart, start and stop application pools change bindings on websites

  Read the article

• Ideas for SVN/SQL/PHP/Linux Dev Enviroment Supporting Multiple Isolated Environments?

  - by jpganz18

  I am trying to create a "dev" for my users. In that environment they would access to their own account of PHPMyAdmin, SQL, Subversion and FTP which is not a big problem, but I would like to emulate like if each one would be in their own server. I mean so that they could change the PHP configuration (for example) and would be done only in its own environment. Any idea how to do this? Do I have to make something "special" at the installations of my server or something like that?

  Read the article

• Couple folders went 'access denied' in Windows. Why and how to fix?

  - by Nathaniel

  So, after a failed Windows 7 install, I put XP back on, and had a adrenaline shot when I got an access denied on a couple of my backed up folders. I already tried the instructions here at Microsoft KB, but it didn't fix it. I did add myself with full permissions on the main section of the Security tab, though, and that gave me access into the folder (I could do it in XP Home because of the Windows NT SP4 Security Configuration Manager). However, it appears some subfolders are still inaccessible. Two questions, then. Why exactly did this happen and how do I fix it?

  Read the article

• ANNOUNCEMENT: Oracle VM 3 Templates Available for Oracle Secure Global Desktop 4.62

  - by Mohan Prabhala

  Today, we are proud to announce the general availability of Oracle VM 3 templates for Oracle Secure Global Desktop version 4.62.  With Oracle VM 3 templates, anyone using Oracle VM 3 need not download, install and configure the Operating System and product(s) individually. In this case, the supported operating system (Oracle Linux 5.7) and Oracle Secure Global Dekstop 4.62 product is packaged together into a template that one can easily import and clone as a VM into Oracle VM 3. This results in a nearly instant deployment and configuration of Oracle Secure Global Desktop within Oracle VM 3.  This means drastically reducing the evaluation and deployment time for Oracle Secure Global Desktop when leveraging Oracle VM 3. Feel free to give it a try! Login into the Oracle VM section at Oracle Software Delivery Cloud  (click on 'Cloud Portal (Main)' at the top-right) and: Under Oracle VM templates - x86 64-bit, look for Oracle VM 3 Template (OVF) for Oracle Secure Global Desktop Media Pack for x86_64 (64 bit) Oracle Secure Global Desktop 4.62 template for x86_64 (64 bit) with Oracle Linux 5.7 Under Oracle VM templates – x86 32 bit, look for Oracle VM 3 Template (OVF) for Oracle Secure Global Desktop Media Pack for x86 (32 bit) Oracle Secure Global Desktop 4.62 template for x86 (32 bit) with Oracle Linux 5.7 Download any of the above templates. Once you are done, you must First import the assembly (ova) file that you downloaded from Oracle Software Delivery Cloud Next, create a virtual machine template from the assembly And finally create a virtual machine from the template. Once the virtual machine is created and starts up, be sure to configure the networking parameters (hostname, IP address, netmask, gateway etc), and optional user parameters correctly. You must also enter a root password during first boot. And that's it - the Oracle Secure Global Desktop install script will pick up the networking parameters, prompt for confirmation and complete a default installation. Once the installation is complete, you may want to refer to the Oracle Secure Global Desktop Administration Guide to learn more about Oracle Secure Global Desktop and its capabilities.

  Read the article

• Dependencies lib32asound2 [duplicate]

  - by The Mini John

  This question already has an answer here: 'teamviewer depends on (…)' while trying to install TeamViewer 4 answers I was trying to install Teamviewer, but i was getting a dependencies error. I tried to install them but with no luck.. I think Mod's are not reading the questions trough when they mark as duplicate I'm getting this Error: Unpacking teamviewer (from teamviewer_linux_x64.deb) ... dpkg: dependency problems prevent configuration of teamviewer: teamviewer depends on lib32asound2; however: Package lib32asound2 is not installed. teamviewer depends on lib32z1; however: Package lib32z1 is not installed. teamviewer depends on ia32-libs; however: Package ia32-libs is not installed. dpkg: error processing teamviewer (--install): dependency problems - leaving unconfigured Errors were encountered while processing: teamviewer I tried sudo apt-get -f install but getting Package ia32-libs is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: lib32z1 lib32ncurses5 lib32bz2-1.0 Package lib32asound2 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'lib32asound2' has no installation candidate E: Package 'ia32-libs' has no installation candidate i cant even get to the sudo dpkg -i teamviewer_linux_x64.deb If i force installation sudo dpkg --force-depends -i teamviewer_linux_x64.deb Although it's "Setting up Temviewer" it gives me this I'm fairly new to ubuntu, can anyone help me out ? I'm on Ubuntu 13.10

  Read the article

• Should I consolidate multiple identical VMs into BSD jails?

  - by Josh

  We run a number of Openfire XMPP/Jabber servers. Due to the way Openfire works, we cannot easily run multiple Openfire instances on one server, so I have 5 identical VMware ESXi VMs, each with CentOS, MySQl, Java, and Openfire. They're the exact same, except for their IP addresses, the actual Openfire MySQL database and it's config file. I am wondering if this is the optimal configuration, or if it would be better to move these VMs to a single FreeBSD machine and put each one inside a FreeBSD jail. Specifically, I am wondering if the benefit of VMWare's Transparent Page Sharing (TPS) would outweight the cost of running 5 identical OSes. Would I end up using less memory with one large FreeBSD machine and java running in bsd jails?

  Read the article

• Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

  - by Darin Peterson

  Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static address 192.168.1.210 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 For the DRAC card, I configured the LAN like this: address 192.168.1.215 netmask 255.255.255.0 gateway 192.168.1.1 For the advanced LAN settings I used dns-nameservers 8.8.8.8 8.8.4.4 I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

  Read the article

• How to configure a MInimal Ubuntu installation?

  - by Uri Herrera

  I recently re installed Ubuntu using the mini.iso, but much to my dismay the mini.iso is not configured the same way as the Ubuntu desktop ISO some "problems" I'm facing such as: An Installation using the regular Ubuntu CD recognizes my active network connections in Network Manager, Installing with the mini.iso gives me a working connection however no connections are "active" in Network Manager displaying the message "The system network services are not compatible with this version." In a regular Ubuntu install connecting an Android phone to the PC mounts the phone's internal memory and sd card if present, Using the mini.iso the phone is detected as it appears with the command lsusb but it's not mounted and can't be mounted. In the same regards using the phone to tether it's connection to the PC via USB, the phone is connected to my (wifi) IN the regular Ubuntu install the phone is recognized as a networking device and is used as connection usb0, while in the mini.iso nothing happens, and trying to add the connection to /etc/network/interfaces results in the OS crashing. Just to make sure It wasn't a matter of my user not having the correct permissions or a lack of "groups", I've checked with an Ubuntu VM and the groups are the same, the networking files are the same, and the packages (except those of ubuntu-desktop such as Unity, Firefox, LibreOffice, and other non-essential software) are Installed in my PC, so what else is there to look for?. I'm sure I'm missing something, and I'd prefer not to install Ubuntu again, using the regular cd. How can I manage to get the same behaviour/configuration without reinstalling ?

  Read the article

• 4096 and 8192 block size read slower than write? by using lsi 9361-8i RAID10

  - by Min Hong Tan

  is it possible that 1024 and 2048 block size read speed is faster than 4096 and 8192 block? I'm using lsi 9361-8i with RAID 10 , with 8 x Kingston E50 250G. result: 1024 = Write: 2,251 MB/s Read: 2,625 MB/s 2048 = Write: 2,141 MB/s Read: 3,672 MB/s 4096 = Write: 2,147 MB/s Read: 231 MB/s 8192 = Write: 2,147 MB/s Read: 442 MB/s is there any possible? and below is the reading when i simply want to test out the RAID 10 function and disaster test by taking out one of the 250G harddisk. the result is different like below: Result: 1024 = Write: 825 MB/s Read: 1,139 MB/s 2048 = Write: 797 MB/s Read: 1,312 MB/s 4096 = Write: 911 MB/s Read: 1,342 MB/s 8192 = Write: 786 MB/s Read: 1,204 MB/s and the result for 4096 and 8192block are different? can any one explain to me is it normal? or I need to do some tuning/configuration? will it affect my host linux performance?

  Read the article

• Apache, Django with mod_wsgi, and large request buffering

  - by Mukul

  In my setup of Apache 2.2 MPM worker and Django 1.3 with mod_wsgi 2.8, I need to support large POST request payloads. The problem is that when there are many such simultaneous requests, Apache uses up all the memory in the system and then crashes. It seems that Apache is buffering the requests completely in memory before executing the WSGI handler and passing it the request. Is there any way to control request buffering in Apache? The log shows the following error whenever the crash happens: [Wed Jun 29 18:35:27 2011] [error] cgid daemon process died, restarting Here's my virtual host's configuration: <VirtualHost *:8080> ServerName example.com ErrorLog /var/log/apache2/error.log WSGIScriptAlias / <path to django.wsgi> WSGIPassAuthorization on WSGIDaemonProcess example.com WSGIProcessGroup example.com XSendFileAllowAbove on XSendFile on </VirtualHost>

  Read the article

• Internet Explorer 10 Crashing With BEX Error (Cannot reset to default)

  - by Abdul Wajid

  I am facing an issue with my Windows Server 2012 IE 10. Every time access local intranet webpage that opens a new windows automatically or any web in new tab or window, it crashes with below error: Problem signature: Problem Event Name: BEX Application Name: IEXPLORE.EXE Application Version: 10.0.9200.16384 Application Timestamp: 50107ee0 Fault Module Name: StackHash_1903 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Offset: PCH_03_FROM_IEFRAME+0x0026B982 Exception Code: c0000005 Exception Data: 00000008 OS Version: 6.2.9200.2.0.0.272.7 Locale ID: 1033 Additional Information 1: 1903 Additional Information 2: 1903bfd460d0d45dac22ad6eb30cc258 Additional Information 3: 6536 Additional Information 4: 6536faeff1b2d044aae2c2dcb49895a2 I also tried to reset the configuration to default but it is also failing. Any idea how can I resolve the issue? I also ran the ediagcmd.exe and uploaded the CAB file. Please see this link to download that CAB file. Thank You

  Read the article

• Ubuntu OpenLDAP and Mac OS X Roaming Profiles

  - by Sam Hammamy

  Today, I'm installing OpenLDAP on Ubuntu 11.04. I have gone through the installation before a few times, but what I have never been able to do is use Mac OSX Lion's Directory Utility to administer the LDAP server, and also never got roaming profiles working. SO the question is: 1) Is there a configuration I need in OpenLDAP so I can administer it remotely. I vaguely remember something like that, but I can't find the answer online. 2) What do I need to setup roaming profiles for a mac os x. I'd like to backup all my laptop data to the LDAP's machine, and potentially, also backup with time machine to an external HD mounted no the Ubutnu machine (but that's a few days ahead of time for now).

  Read the article

• Centos 6.5 -- backported upgrades/php.ini directives included in php 5.3.3

  - by Decave

  PHP 5.3.3 is the latest version of PHP available with the official CentOS 6.5 repos. As most of you know, calling it version '5.3.3' is slightly deceptive because critical bug fixes are actually back ported into version 5.3.3, so in effect 'version 5.3.3' does get upgraded now and then. My question is: aside from manually toggling directives in php.ini, how can you tell which new directives, that were implemented in, and officially supported by, later versions of PHP, are also available in CentOS 6.5's backported PHP 5.3.3? For example, max_input_vars (http://php.net/manual/en/info.configuration.php#ini.max-input-vars) has been available since PHP 5.3.9. IS there an easy way to tell whether CentOS included this in a backported upgrade to 5.3.3? Thanks!

  Read the article

• anyone doing php-fpm and APC? cache files missing in /tmp

  - by Vangel

  I have been using xcache for a long time. Recently I put together php-fpm and nginx. I see apc is installed and enabled in the configuration. I was assuming that apc will automatically opcode the files and store it somewhere. According to config it should be in /tmp/apx.xxxx but there is no such thing there. What am i missing? any clues to investigate would be of much help. Please note I am using php 5.3 fpm. thanks mates. UPDATE: i looked at apc.php it says things are fine. will just have to take its word for it.

  Read the article

• Raid HDD Boot up

  - by user234695

  My server is Power Edge 1950 running server 2008 32Bit, using 3 Physical SAS HDD as a Virtual 2 Disk configured for RAID5, with partition of C drive as OS and D drive as Data. Planning to format and install Server 2008 R2 64Bit so I insert a New Physical disk and configured as RAID5 and clone the C drive and D drive to the new hard disk. Now I need to test that the new hard disk is able to boot windows and work as expected. How do I test, I am not able to boot the windows by choosing the new harddisk, the bios show only the existing HDD, not the new one. Also, if I remove the old three hard disk, and leave the new harddisk and then am I able to boot the device, if I do this does my existing RAID5 configuration and data on the hard disk still remain.

  Read the article

• Unable to modify variables phpmyadmin via variables tab (Xampp)

  - by rookie coder

  I am quite new to phpmyadmin configuration. I had project where utf8 encoding is needed. What i'm trying to do is to change the variables text/char all into utf8. I changed, yes at that moment the values changed into values I wanted. But then when I terminate Xampp and reenters phpmyadmin page or even refreshing the page, all the values restored to default (original values). My phpmyadmin had default user as root and hadn't been set a password yet. There is also no logout button in phpmyadmin landing page. I had difficult time even to set the server connection collation (hangs indefinitely and never seems can be updated). phpmyadmin version:4.1.6 mysql:5.5.36 (latest version) I doubt this could be due to malformed installation, because same things happened in my other computer too (exactly the same versions). what could be wrong? thanks.

  Read the article

• All of ESX4 hosts not responding after rebooting vCenter server

  - by hojyokinmo

  Hello I'm constructing 5ESX+a vCenter serv. I'm testing FT on the system. Today vCenter OS (W2008) demanded system reboot. After rebooting vCenter Serv. All of ESX hosts have alert icon. end indicate "not responding" I tried to connect ESX (version 4) hosts to vCenter again. Once they came back normally, but after few seconds ,They turned red again. All of them have ping connection to vCenter serv. There are no red messages in Tusks and events. Two messages are found in Summary of Cluster ·There aren't sufficient resource for HA failover. ·Can't contact primary HA agent. I'm also not able to reset FT configuration because all of VMS aren't accessed from vCenter What should I do?

  Read the article

• How to install Citrix receiver xubuntu 13.04 64-bit

  - by Bård S

  Anyone have a walkthrough on installing Citrix receiver on Xubuntu 13.04 64-bit? Update $ sudo apt-get install libmotif4 nspluginwrapper ... snip ... Setting up libmotif4:amd64 (2.3.3-7ubuntu1) ... Setting up nspluginviewer (1.4.4-0ubuntu5) ... Setting up nspluginwrapper (1.4.4-0ubuntu5) ... plugin dirs: nspluginwrapper: no appropriate viewer found for /usr/lib/flashplugin-installer/libflashplayer.so Auto-update plugins from /usr/lib/mozilla/plugins Looking for plugins in /usr/lib/mozilla/plugins Segmentation fault (core dumped) Processing triggers for libc-bin ... ldconfig deferred processing now taking place sudo dpkg --install Downloads/icaclient_12.1.0_amd64.deb Selecting previously unselected package icaclient. (Reading database ... 155808 files and directories currently installed.) Unpacking icaclient (from .../icaclient_12.1.0_amd64.deb) ... dpkg: dependency problems prevent configuration of icaclient: icaclient depends on libc6-i386 (>= 2.7-1); however: Package libc6-i386 is not installed. icaclient depends on ia32-libs; however: Package ia32-libs is not installed. icaclient depends on lib32z1; however: Package lib32z1 is not installed. icaclient depends on lib32asound2; however: Package lib32asound2 is not installed. dpkg: error processing icaclient (--install): dependency problems - leaving unconfigured Errors were encountered while processing: icaclient

  Read the article

• Crypto-Analysis of keylogger logs and config file. Possible?

  - by lost.

  Is there anyway Encryption on an unidentified file can be broken(file in question: config file and log files from ardamax keylogger). These files date back all the way to 2008. I searched everywhere, nothing on slashdot, nothing on google. Ardamax Keyviewer? Should I just write to Ardamax? I am at a loss of what to do. I feel comprimised. Anyone managed to decrpyt files with Crypto-analysis? More Information-- There are log files in the folder and a configuration file, "akv.cfg". Is it possible to decrypt the files and maybe getting the attackers email address used to receive the keylogger logs? I've Checked ardamax.com. They have an built-in log viewer. But its unavailable for download. If superuser isn't the proper place to ask, know where I might get help?

  Read the article

• Disabling a touchpad in Windows

  - by Shamaoke

  I want to permanently disable a touchpad in Windows running on my laptop, since firstly, I use a mouse, and secondly, when I work, I often touch it accidentally what causes definite inconviniences. I tried the following approaches to disable it but with no result: Turned it off through BIOS — there's no such function there; Turned it off through the touchpad configuration utility — there's no such function there; Turned it off through the device manager — the disable button is inactive; Turned it off through a hotkey (Fn + F1 in my case) — the hotkey doesn't work; Uninstalled the proprietary driver — Windows automatically downloaded the standard driver; Uninstalled the standard driver and turned off the automatic driver download function (Win + R ? "systempropertiesadvanced" ? Hardware ? Device Installation Settings) — all the same, Windows downloaded and installed the driver. How can I disable a touchpad? Windows 7; the Alps touchpad.

  Read the article

• How to disable Apache http compression (mod_deflate) when SSL stream is compressed

  - by Mohammad Ali

  I found that Goggle Chrome supports ssl compression and Firefox should support it soon. I'm trying to configure Apache to to disable http compression if the ssl compression is used to prevent CPU overhead with the configuration option: SetEnvIf SSL_COMPRESS_METHOD DEFLATE no-gzip While the custom log (using %{SSL_COMPRESS_METHOD}x) shows that the ssl layer compression method is DEFLATE, the above option did not work and the http response content is still being compressed by Apache. I had to use the option: BrowserMatchNoCase ".Chrome." no-gzip' I prefer if there are more general method in case other browsers supports ssl compression or some has a version of chrome that does not have ssl compression.

  Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >