Search Results

Search found 1270 results on 51 pages for 'amd'.

Page 34/51 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• Ubuntu Karmic, Maximize delay problem

  - by Loukas990

  Hello, I have tried various ubuntu versions, Ubuntu Karmic Koala 9.10 x86, Ubuntu 10.04 beta DVD, Ubuntu 9.10 AMD64, Mandriva 2010 x86, also a Fedora version and after installing compiz on all OS's, everything is working normal and smooth, even the compiz effects, cube, water, fire, wobbling windows, etc, except of the Maximize effect, where i get 2seconds+ delay for the effect. Cause it got me in a lot of thinking, why im getting this delay "problem", do you think there is any solution? or at least a way to decrease the delay? Thanks in advance. ;) P.S. My laptop is a Toshiba Satellite P300d, AMD Turion 64 x2 Dual-Core TL-64 (2.20 GHz), ATI Mobility Radeon™ HD 3650 512MB, 3GB RAM.

  Read the article

• Sudden restart when Ubuntu almost loaded from disc.

  - by Wesley

  Hi all, Here are the specs beforehand: ECS K7SEM motherboard AMD Duron 900MHz 2x 256MB PC133 SDRAM The Best Power MT-500P 500W PSU Integrated graphics No hard drive DVD-ROM - will update with brand & model Now, I was starting up this machine after it was left outside for 3 months in winter weather. (I got this from a friend.) I was able to get it started and tried to load Ubuntu from the DVD-ROM. It was fairly successful and got up to the point when the Ubuntu logo is glowing. However, when Ubuntu was about to go to the main screen, the computer crashed and automatically rebooted. Is there any reason why this is happening? Also, I should mention that when I try to hit Delete on the BIOS screen to go to Setup, it only shows a screen with four lines saying something Novell something... I will edit with exact lines. Should I be resetting the BIOS or something? Thanks in advance.

  Read the article

• Install Windows 8 64-bit over the top of Windows 8 32-bit

  - by Andrew Gee

  I currently have Windows 8 32-bit installed from MSDN (I didn't realise at the time that my processor supports 64-bit). I understand that you can't upgrade within Windows 32-bit to 64-bit directly from the ISO. I have burned the ISO to a DVD, and have attempted booting from this drive. The problem I am encountering: The operating system couldn't be loaded because a required file is missing or contains errors. File: CI.dll Error code: 0xc0000221 You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Additional info: Computer: HP Pavillion m9280.uk-a Processor: AMD Phenom 9600 Quad-Core RAM: 3 1GB sticks Thanks in advance!

  Read the article

• How to view status of software RAID 1 resynching?

  - by tputkonen

  I have two 500 GB disks and yesterday I mirrored first drive to the second one using software RAID 1. PC has now been on for 30 hours. Both disks say "Resynching", but there is no progress indicator. In addition, there is a small yellow exclamation mark on both disks. My questions are: How long could the synch take for 500 GB drive with about 150 GB of data? PC has 4 GBs of RAM and AMD dual core 4000+ Is there a way to monitor status of the synching? How can I check what the exclamation mark means?

  Read the article

• Where do I connect the two red SATA cables on my motherboard?

  - by Dennis Smith

  I have a Compaq Presario PC SR5110NX. The Processor is AMD Athlon 64 3800+. It has 512 MB of RAM and a 40GB Hard Drive. I'm running Windows XP Professional on it. I have 2 SATA drives, one is black and the other is white. I have 2 red little cables, and they have the letters and numbers on them. On one side of the cable it says "HP P/N:5188-2897 0720". My motherboard is a MCP61PM-HM Rev 1.0B. Where do I connect the two SATA connectors?

  Read the article

• Hypertransport sync flood error

  - by Carl B

  What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

  Read the article

• Why is cpu power management not working in Server 2012 with Hyper-V?

  - by Roland

  We've been using Server2008R2 with Hyper-V for a couple of years now and chose it at the time because of its ability to make use of Intel SpeedStep and AMD PowerNow! Now with Server 2012 and Hyper-V V3, all power management abilities seem to be gone. The CPUs are always at full speed and our servers need twice the energy as before while idling. (Yes, the CPU P-states are enabled in the BIOS) Is this by design? Is there a workaround to enable cpu power management again? Despite the great new features of Hyper-V 3, this would be a show-stopper for us since we are very concerned about energy consumption.

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• Harvard vs. Von Neumann architecture

  - by user32569

  Hi. Our teacher told us, that Harvard architecture is the most evolved and produced architecture today and towards future. but I thing becouse os massive averhead of x86 and Von Neumann nased ARM systems that actually Von Neumann is the most used architecture today. Yes, MCUs with Harvard are even more produced, but since they all have just minor purpose (compared to x86 and ARM based) that Von Neumann is actually the one. Or is it really Harvard? And second, I know this is strange question, but does any architecture combining both exists? to have separate memory for data and programs, therefore faster instruction processing, but still able to work with these as Von Neumann? To be able o load amd unload programs to program memory on the fly? Isnt this the way the x86 should have go? Or would there be some bottleneck that pure Von neumann solves? Thanks.

  Read the article

• Can I upgrade my computer to run SC2 smoothly?

  - by Citizen

  My desktop is: ACPI x86 AMD Athlon x2 Dual Core 3600 1.9ghz 1 gig ram NVIDIA Geforce 7300 I'm running 32 bit windows vista. My budget is ~$250 When I play SC2, its incredibly slow and I have to play with the graphics on the LOWEST settings. What can/should I buy (specifically) to get this to run SC2 smoothly? Are max setting possible? I'm not sure what I can get that will be for sure compatible + will actually do the trick. Or is my computer simply too old?

  Read the article

• 2 GPUs (for multi-monitor setup)

  - by A Dwarf

  I have a machine to which I need to connect a second monitor. This machine currently hosts a ATI Radeon HD 4770 with two DVI adapters. The second monitor to be hooked to this machine is a VGA monitor. Until I find a DVI-VGA adpater, I'm thinking installing a second graphics card which does have a VGA adapter, an NVidia card. Can I successfully run both AMD and NVidia cards on this machine? Any specifics I must be aware of, like how to ensure the ATI card to be the main card? Operating system is Windows 7

  Read the article

• Is it possible to control my CPU frequency?

  - by Tim

  My laptop's CPU Type is: Mobile AMD Turion 64 ML-30, 1600 MHz (8 x 200) I was wondering how to find out if its CPU frequency is controllable? What softwares or other ways can control my CPU frequency? My OSes are Windows XP and Ubuntu. Can I control CPU frequency so that the CPU temperature can be controlled not to exceed some temperature? Thanks and regards! More information: My laptop is Acer Aspire 5000. Its motherboard is reported by Speccy as: Manufacturer: Acer, Inc. Model: Lugano M Version: Not Applicable Chipset Vendor: SiS Chipset Model: 760GX Chipset Revision: 03 Southbridge Vendor: SiS Southbridge Model: LPC Bridge Southbridge Revision: 25 BIOS Brand: Acer Version: 3A19 Date: 05/17/05

  Read the article

• HP Proliant ML115 G5 - Boot order lost after reboot

  - by Filipe YaBa Polido

  I have one HP Proliant ML 115 G5 (AMD) with the latest BIOS (07-06-2009) and recently I've installed an USB disk. This is a common problem on old Proliant servers. When you plug the USB disk, BIOS boot order changes and tries to boot via USB. So, I'll change the BIOS settings and make the SATA disk the default boot device. The problem is, when I need to unplug the usb disk, and plug it again later. I can't be always changing the BIOS settings... How can one solve this for ever?!?!

  Read the article

• Jan 2010 Microsoft update trashed my Win XP (64bit) PC

  - by Mark Pawelek

  I waited until this morning to install these 5 updates. My ancient Win XP (32 bit) PC has no problems but my Win XP 64 bit will not start. From the startup menu none of the 5 options given (e.g. safe mode, last known good configuration, etc) work. After selecting an option, the Windows Logo screen appears. About 9 seconds later a blue screen of death flashes [I can't read the error messages because it's there for about 100 ms] then it cycles through the reboot again. PS: This is a pretty cheap mobo (Ge Force) with an AMD 3 GH chip - but until today it did actually work. What should I do? Reinstall the O/S?

  Read the article

• XenServer migrate machines between hosts

  - by Hubert Kario

  I have a XenServer 5.6 Free setup with 5 VMs (Windows and Linux) using about 1.5TB of directly attached storage. Because our virtualisation needs have grown a bit, we currently are preparing a faster XenServer 6.0 Free machine with more RAM and a more storage. Again, directly attached disks. How can I migrate the VMs between XenServer machines? I don't need to keep the machines up and running during migration, but using VM export and import would definitely take too long. Would making a VM with the same configuration on new host and dd'ing the LVM volume over network be the only quick and least painful solution? Are there any "gotchas" I should look out for when doing something like this? The old machine has an AMD Phenom II, the new has Intel Xeon E5 CPUs.

  Read the article

• Linux only recognizes 800Mhz from 2Ghz

  - by Leo

  I tried with Suse 11 (KDE), Xubuntu 11.10 and Lubuntu 11.10 and these systems only recognizes 800Mhz from my processor of 2Ghz! The utilities I used are: linuxinfo, sysinfo, "system profiler and benchmark". And all of this only shows 800Mhz My system specs are: AMD Turion 64 Mobile MK36 512 RAM nVidia Geforce Go 6150 (I also tried with nVidia restricted drivers) 120GB Hard drive The weirdest thing is that Windows XP and 7 recognize the 2Ghz of my processor, What can I do? p.s. (It is not just the value of 800Mhz, I also feel my system very slow with linux)

  Read the article

• How can I view updatedb database content, and then exclude certain files/paths?

  - by rubo77

  The updatedb database on my debian server is quite slow. where is the database located and how can I view its content and find out if there are some paths with useless stuff, that I could add to the prunepaths? my /etc/updatedb.conf looks like this: ... # filesystems which are pruned from updatedb database PRUNEFS="NFS nfs nfs4 afs binfmt_misc proc smbfs autofs iso9660 ncpfs coda devpts ftpfs devfs mfs shfs sysfs cifs lustre_lite tmpfs usbfs udf" export PRUNEFS # paths which are pruned from updatedb database PRUNEPATHS="/tmp /usr/tmp /var/tmp /afs /amd /alex /var/spool /sfs /media /var/backups/rsnapshot /var/mod_pagespeed/" ... and how can I prune all paths that contain */.git/* and */.svn/* ?

  Read the article

• Problem with keyboard layout when OS X 10.6.3 -> Fedora 13

  - by user20196

  Hi, I have VMware installed on Fedora 13 (host OS) /amd 64bit. When I log to it from console VMware works good. I wanted to start remotely from OS X 10.6.3, so I installed NX client. Everything is fine with the keyboard layout if I do not use VMware. When I try to run the guest OS on VMware my keyboard is cut off completely. The host and the guest OSes are setup for "us" layout and for "generic 105 keys" keyboard.

  Read the article

• Need advice on PC components for high-end games but in limited budget

  - by Md Atif

  I need advise, I want to buy PC components which will be good for gaming as well as be under my budget. First thing I chose is Graphics card : ATI HD 7850 2GB DDR5 then matching things up with this selected following: Processor: AMD 3.5 GHz AM3 FX 8320 8 Core Piledriver Mobo: MSI 990FXA-GD65 RAM : 8GB DDR3 (4x2) Is this setup looks compatible? If making any of above component inferior will have negligible affect on performance/gaming(like buying 970 chip mobo instead of 990) then please let me know so I can save some money :) ? Any other advice?

  Read the article

• UEFI - Linux Mint Boot from USB Doesn't work

  - by Joe Bennett

  I'm running Linux Mint (only OS other than in VirtualBox) and wanting to remove it. I've created a Live USB of Windows 8 using Windows 7 USB/DVD Download Tool - Yes, I know it says Windows 7 but I've been doing research and I am hearing from everywhere that it also works for Windows 8. The ISO was loaded on just fine (AFAIK) Computer came with Windows 8 pre-installed I have Safe boot and Fast boot disabled in the BIOS Settings I have USB as my first boot option I have tried both the USB 2.0 and 3.0 ports Yet, Mint is all that will boot up. Anybody have a similar issue? If it helps, the computer is a Toshiba Satellite S855D Laptop with an AMD APU quad-core processor (3 CPU, 1 GPU)

  Read the article

• ASUS EAH5770 CuCore problem: VLC Stutting!

  - by aiacet

  Hello to everyone and thank you in advance to all the people that will want help me. Like in the title my problem concernig this boring stutting when i play a Tv series episodes or a film on VLC whit my mew PC. Pc components are: AMD Phenom II X4 955 Black Box 125W Asus M4A785TD-M EVO Radeon HD5770 1GB GDDR5 Asus CoolerMaster GX 650W G.Skill 2x2GB PC3-12800 1600Mhz-787 4GBECO Western Digital 1TB SATAII 64MB Monitor are SyncMaster 920Nw OS: Windows XP 32 bit Display adapter drivers are updates at the latest release (catalyst 10.4) and also the ATi Vga bios are updated Besides when i play the same episode with DivX Plus Player i have video and audio stutting. I can play very well Dragon Age Origin and other games but i'm unable to see a beutyfull movie. Please help me

  Read the article

• Seasgate GoFlex NAS + Horrible Speed = Bad Experience

  - by Jon H

  I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

  Read the article

• Mounting root failed. Dropping into basic maintenance shell

  - by vmsystem

  Hi, I have purchased AMD Phenom X4 955 3.2GHZ processor with supporting gigabyte GA-MA785GM-US2H mother board / 6GB DDR2 RAM / 500GB SATA drive for learning Vmware ESX 3.5 product. In the above configuration, I have installed windows xp 64 bit operating systems and continue to installed vmware workstation 6.5. From the VM workstation, I can able to install ESX3.5 update2, but I unable to start properly, please refer the below mention error. “Mounting root failed. Dropping into basic maintenance shell. To collect logs for VMware, connect a USB storage device and run 'bin/vm-support '. Machine will be rebooted when you exit from this shell.” The same was tested in the windows 2003 Enterprise Edition server / windows 7 32bit / windows 7 64bit also, Please help me to resolve the issue.

  Read the article

• Radeon hd 6570 black screen

  - by Sho

  I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >