Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 34/1036 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Need help with exploring a USB drive

  - by Bob Getsla

  When I plug in a USB drive, I see it on the left hand edge of the Unity desktop (11.10, 64 bit) but when I try to explore it, VLC starts and tries to play whatever it can find in the USB drive. This behavior began when I updated from 11.04 to 11.10. I literally cannot look into the contents of any of the USB drives I have, because I cannot stop VLC, nor can I do anything when I click Open other than watch VLC start up. This is very frustrating because it makes my USB sticks essentially useless. HELP! I'm sure that there is something a wizard could do about this, but I am not a wizard, and I am at my wits ends. Trying to get to the System Settings menu works, and I can see the setup for "Removable" devices, and they are all set to "Ask" but that is clearly not what is happening. So it looks like I must reach for the command line, but where do I go to find the settings for what the desktop does when I plug in a USB drive and wish to explore the file structure in it and possible copy a file into the USB or from the USB drive. Right now, VLC media player is always getting in my way. :-(

  Read the article

• Personalisation of the Ubuntu interface

  - by Ben

  It's quite hard to phrase this question as the answer is very subjective and I don't know the right terminology to ask for what I want, but I will try my best. I love linux and would love to use it full-time as my main OS but the one think I have a problem with is the look of it. In my opinion it looks like it was designed for a child and I like my computer to look stylish rather than dated (this is opinion obviously). I like the look of OSX but there are certain things that I don't like, so no, I am not asking the age old question of "how do I make ubunutu look like OSX"...most of the attempts I have seen of this have been pretty poor when put up against the real thing so I just want to take certain things from it. Things I'd like to take from OSX: Spotlight (I don't like the Unity dashboard-esque thingy) Expose Spaces Dock (at the bottom) Icons (apart from the apple one) Look of file manager - its more pleasant to navigate around the file system. Closing an application window doesn't actually quit the program, so when you next launch it - it is instantaneous. Global menu (at the top) What are the latest Ubuntu alternatives to these? When it comes to actually changing the look of Ubuntu what should I be looking at? I know the following exists: Shell theme Icons Fonts ...but is there anything else I need to look into to actually change the look? I hear the term "Window Manager" thrown around, but I don't actually know what that is. What are good sources for reviews/links to the latest and greatest customisation techniques? Ubuntu now comes with Unity which I don't like very much. What are my alternatives? Should I look into Gnome3 or switch to classic desktop which is Gnome2 if I recall correctly? I hope I haven't put too much in one question and that it makes sense. Thanks.

  Read the article

• Fan always on and overheating problems on HP G62

  - by Dave

  I have a HP G62 with i5 processor, 4G Ram and ATI HD 5470. Started using Ubuntu 4 months ago, first was 11.10 and after 12.04. Everything worked perfectly until some weeks ago when my cpu fan became "crazy" and I mean by this always on, noise and overheating problems, for sure if I put a glass with water in some minutes will boil (and I mean it). There can be a bug in the last kernel or any other Ubuntu's official update? And by the way CPU fan is cleaned like a new born baby; Used jupiter and all those stuff (lm-sensor, psensor...) - same problem; Don't ask me to install ATI drivers because will work like sh#t (interface laggy as HD 5470 isn't supported by Ubuntu) and I can't even open ATI Catalyst (error when I try to open it), more than this I always used open source drivers and as I said, worked perfectly (3d, effects). Right now I'm back to Windows and everything is working perfectly but my main problem is that I get used with Ubuntu and kinda weird to use windows again. I want back my nice and almost perfect Ubuntu. Thanks, Dave

  Read the article

• Broke Ubuntu 12.04 either with Screencloud or Ubuntu Tweak

  - by pgrytdal

  Earlier today I installed the Screen Shot app "Screencloud" and after the installation Firefox was having problems. I didn't think much about it, just closed Firefox, then proceeded to change the toolbar opacity on Ubuntu Tweak. After restarting my system, hoping it would fix Firefox (because, you know, restarting fixes everything ;) ) I am able to go to the Log In Screen, type in my password, but then I get 3 errors regarding the Screencloud Ubuntu One, Imgur, and Dropbox plugins. After clicking the "Okay" on all three errors, all I see is my wallpaper. I am not able to access the terminal VIA CtrlAltT, but I am able to log out VIA CtrlAltDelete. I have tried all desktop environments I have installed (that, except for Unity 2D, has to do with Cairo Dock.) I hope I have provided enough information. If you need more, please ask. Please help! I would like to not have to re-install Ubuntu. Other info: OS: Ubuntu 12.04 I also have a Ubuntu 12.10 Live USB, but Ubuntu 12.10 hasn't run very well on any of my computers.

  Read the article

• Need help installing the Intel VGA Driver [closed]

  - by Ary Catur Wicaksono

  Possible Duplicate: How do I install the Intel Graphics driver in my system? how to install intel VGA drive..?? I've been searching on google but did not see too I've been trying to ask the ubuntu forum in Indonesia. but they did not reply my post.. is there anything that can help me? *I am sorry my English is rather chaotic arthur@Chunx:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) arthur@Chunx:~$ sudo lshw -c display [sudo] password for arthur: *-display description: VGA compatible controller product: 82G33/G31 Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 10 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff arthur@Chunx:~$ sudo apt-get install xserver-xorg-video-intel Sedang membaca daftar paket... Selesai Membangun pohon ketergantungan Membaca informasi yang tersedia... Selesai xserver-xorg-video-intel telah berada dalam versi terbaru. 0 dimutakhirkan, 0 baru terinstal, 0 akan dihapus dan 190 tidak akan dimutakhirkan.

  Read the article

• Cannot install Ubuntu on an Acer Aspire One 756

  - by Byron807

  I have used Ubuntu before, in virtual machines, but today I decided to make the leap and I bought a netbook to install Ubuntu as a "real" OS alongside Windows. The netbook I bought is an Acer Aspire One 756, with a 64-bit Intel processor, 4GB RAM, and Windows 8 as the default OS. I have now encountered several obstacles that actually prevent me from installing Ubuntu 12.10. Here are all the things I have tried so far: Used a live CD, in combination with a USB DVD drive. (I should point out that the Aspire One does not have an optical drive.) The computer does not boot in Ubuntu; the drive keeps spinning, but nothing happens, even though I changed the boot order in the BIOS. Used a USB drive created via the tool available on pendrivelinux.com. Again, I've made changes to the BIOS to make sure the computer tries to boot from USB before using the built-in HDD. The results vary in this case: sometimes, the computer keeps rebooting like crazy until I remove the USB drive, at which point the computer boots into Windows 8, as expected. If I use a different USB drive, I get an error message that says that the USB drive has been blocked due to "the current security policy". Tried to install Ubuntu via Wubi. The program appears to install something, but at some point during the installation process, I get a non-specified error message and nothing else happens. I am not sure if these are known issues; in any case, searching the forum has not yielded any results, so I thought I should simply describe my problem here in the hope that this question has not been answered before. I would greatly appreciate any help with this annoying problem. Of course, if anything is unclear, do not hesitate to ask for further details.

  Read the article

• Setting up dual monitors, Xorg.conf issues

  - by JTS

  I just got a new computer (W520, Graphics card nVidia GF106 [Quadro 2000]) and installed ubuntu on it using wubi. I have everything working, so I wanted to set it up to be able to use two monitors with an extended screen. I figured I had to edit Xorg.conf, but the file didnt exist. So I tried to create it by booting in recovery mode, and executing Xorg -configure but I am getting these errors: (EE) Failed to load module "vmwgfx" (module does not exist, 0) (EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) [drm] No DRICreatedPCIBusID symbol Number of created screens does not match number of detected devices. Configuration failed. ddxSigGiveUp: Closing log Any idea how I can get Xorg -configure to work, so that I can have an xorg.conf file that I can edit to enable twinview? EDIT: Another way I could ask the same question to solve this problem is, why can't I boot with an xorg.conf file generated by nvidia-xconfig? Is there something in the generated xorg.conf file that might need editing?

  Read the article

• How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

  - by shaggyjack

  Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

  Read the article

• ubi-partman failed with exit code 10 during 12.10 fresh install

  - by Austen

  ive been trying to install ubuntu 12.10 on my acer aspire one 534h,using an iso from the official site and a 16gb flash drive using unetbootin. my aa1 is running factory settings (xp). it will boot fine from the usb, but the installation throws the error in the title after choosing my wifi options, and contineus to give the error after every subsequent step. after trying to complete the installation ingoring the error, it hangs on the ask ubuntu screen. ive tried reformatting and reflashing (sorry, heavy android user) ubuntu to the flash drive, to no avail... do i need to format somthing else, or is it something to do with th Hdd and RAID drives? ive looked in my BIOS and found nothing related. only the option for sata or ide... any help would be great, as ive been working at this all day... edit: the error message was ubi-partman has failed with exit code 10. see (gave a directory) for more info. it then informed me that if i continued the install could be incomplete or completly broken. not sure abouth the wording in the second part, but the error is word for word... thank you.

  Read the article

• Beginning with shell scripting

  - by Kevin Wyman

  I am fresh into Ubuntu and one of my goals is shell scripting for personal (and maybe public) use. I'm a novice, though I do understand some of the basics (e.g. what a variable, string, loop, etc... is) but to get the most of scripting I need to learn in-depth. I figure the best way to do that is to jump right into scripting and ask questions only pertinent to the stage I am at in my attempted script. Scenario: I have edited my sudoers file to allow my non-root user to run sudo commands without being prompted for a password. Question: In vim, what would be the best code to use for a function that checks whether this condition is [true], If not, prompt the user if they want the script to edit and save the sudoers file to make this condition [true]? Layout - If condition is true, carry-on with rest of script. If condition is not true, the script silently edits/adds the line: %sudo ALL=(ALL:ALL) NOPASSWD: ALL in the sudoers file, saves and then continues on with the next part of the script. Any help with this would be greatly appreciated and assist me in my journey to writing shell scripts.

  Read the article

• How is the Ubuntu installation supposed to work?

  - by Bob D

  I have given up on installing Ubuntu 12.04.01 for the sixth time. I finally got Windows XP to work again. So I blitzted the Ubuntu partition and the swap partition and was about to install the sixth try when it occurred to me that ought to ask how is is "supposed" to go. My installer will install Ubuntu on the Linus ext4 partition I created by hand in Windows on my C drive. But the installer keeps insisting on installing the OS on my D drive unless I intervene. So if I choose "do something else" it will accept installing Ubuntu on the C drive in the partition I previously created, but it insists on putting the "Device for boot loader installation" on the D drive. I can select a different drive at this point (where I could not with the "along side windows choice) but what drive to I choose??? It lists sda, sda1, sda5, sdb and sdb1. The five times before this all ended in disaster letting the installer choose. So I need human intervention. Where is the safe place to do this. The results from the previous attempts left me with only the Ubuntu that would boot, the boot to windows from the grub menu failed every time. Is there a better version of Ubuntu I can use? Is V12.04.01 messed up? My goal is still to use Wine on it to run PC programs. I would like to find a shell or skin or something that makes it seem like windows but have the security and power of Linux under the good. I have seen this type of system and it worked very well. I know I am getting long winded but I have been though at least four of the seven rings of hell already, so I want this install to be the last.

  Read the article

• How do I mount my Android phone?

  - by Amanda

  I'm puzzled because my phone used to just appear when I plugged it in. It doesn't anymore and The development options are definitely set to allow USB debugging. The phone is charging via USB but doesn't appear in lsusb [0 amanda@luna android-sdk-linux_86]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 17ef:4807 Lenovo UVC Camera Bus 003 Device 012: ID 413c:1003 Dell Computer Corp. Keyboard Hub Bus 003 Device 003: ID 08ff:2810 AuthenTec, Inc. AES2810 Bus 003 Device 013: ID 413c:2010 Dell Computer Corp. Keyboard Bus 003 Device 014: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus] adb devices -l shows nothing. In my Wireless and Network settings I changed the USB connection settings to "Mass storage" -- they were set to "Ask on connection" though I definitely wasn't getting asked. I don't get any Click here to connect via USB alert either. I'm not even sure whether the issue is my phone or my computer. It seems odd that it isn't even appearing in lsusb Not for nothing, the thumb drive on my keyring also does not appear in lsusb -- I've tried both in a bunch of different ports. I kind of assume the thumb drive is just borked, but it could be my OS.

  Read the article

• Install GRUB to Ubuntu Partition

  - by Noel

  So my computer has the following partitions: /dev/sda -- (I know this isn't a real partition, but more so the boot loader) /dev/sda1 -- (Windows 7 Boot Loader) /dev/sda3 -- (Windows 7) /dev/sda4 -- (Data partition, NTFS) that means i have /dev/sda2 as free space. I do not want to change the MBR of the computer. I would like /dev/sda2 to contain GRUB AND Ubuntu. So ideally when I turn my computer on, BIOS would ask if I'd like to boot Windows 7 or Ubuntu(or Grub or partition 2), and I could choose either one. But I would like Grub and Ubuntu to be on the same partition, so they will not interfere in any way with windows or window's boot loader/partition (sda3) How can I do this? Catch: when formatting partitions, Ubuntu does not give me the option to make them virtual partitions, so that makes things harder. I tried: installing Ubuntu to /dev/sda2 (which I formatted as ext4) and then told the Ubuntu installer to install the bootloader to /dev/sda2. But when I select "Ubuntu" from BIOS's boot selection, it loads a black screen and says "invalid arch independent ELF magic grub rescue _" and allows me to input stuff. How can I fix this, or tell my computer where Grub is?

  Read the article

• Issues with Cinnamon?

  - by Corrodie

  I just recently switched my system over to Ubuntu 12.10, and decided on Cinnamon as my environment-- it all worked fine, at first. But I was poorly educated and started using Compiz and Emerald along with it--Setting both as replacements in startup processes. I now know, that's a big, big mistake. Now when loading Cinnamon, I am greeted to my background image, and only that. My only options seem to be to open a terminal. I was advised to attempt muffin --replace and mutter --replace Neither to any avail, the terminal closes, and I cannot load another one unless I completely reload. I went back to Unity, purged and autoremoved Cinnamon, emerald, and compizconfig, and attempted to reinstall Cinnamon, thinking that would solve the problem--no, it came back just as broken as before. So, I reinstalled ubuntu, then cinnamon---still broken. I'm assuming I must find a way to remove the replace commands-- but as I have no menu, I'm not positive I can do that. Is there any way I can access the startup processes via terminal? I'd think though, if I completely removed Cinnamon, all configurations would be gone too, so, it's just not making much sense. Is there some kind of reset I could possibly do? I've been browsing forums and questions here, all leading to things I'd already done, so, it can't hurt to ask for myself. I apologize if you would rather I have posted this over at mint. Next time, I will definitely check compatibility instead of assuming something just has to work. Any help is greatly appreciated, thanks! ****EDIT***** It seems although it didn't allow me to do it before, I was now allowed to access the settings and startup processes for Cinnamon via Unity, and, after quickly removing aforementioned processes- I'm up and running again.

  Read the article

• Dual monitors, screen resolution, xorg.conf.d

  - by Flase

  I do a lot of RTFM but this one has got me stuck. I have Ubuntu Studio 12.04 Precise Pangolin with XFCE as its default desktop. My old HIS ATI Radeon 9250 graphics card was adding red crud across the screen with the generic driver, but downloading the proprietary "fglrx" driver makes it work cleanly. The trouble is the Catalyst control centre refuses to recognise my old card so I must do some manual configuring to make sure both the DVI and VGA monitors are capable of the correct screen resolution (both 1280x1024) and a dual display. It used to be easier to just edit the existing xorg.conf file and add another resolution and so forth, but now there are automatic xorg.conf.d directories (more than one) with scant documentation. Creating a generic xorg.conf with a terminal command creates every setting imaginable. What I want to do is create the simplest conf file which just tells the system the following: My VGA monitor can do 1280x1024 60Hz The two monitors together may be 2560x1024 width The VGA monitor on the right I might need to specify Xinerama if it's needed Thank you. I don't think I need to bore you with log files, but please ask for further info. Mike

  Read the article

• Video lags/freezes in SMPlayer and VLC

  - by RanRag

  When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

  Read the article

• Why does video playback lag/freeze when I go into full-screen mode?

  - by RanRag

  When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

  Read the article

• Installing Ubuntu along with windows 7 on shrunk partition

  - by Thabo

  I am new to Ubuntu OS and ask Ubuntu community. First this is not a duplicate question. Actually this a question which is a summery of all solutions and questions were posted in this community, related to Install Ubuntu along with Windows 7. I have bought a new Hp laptop with its original windows 7.I want to install Ubuntu along with windows 7 64 bit. I ran the Ubuntu 12.4 Desktop installation CD. But Ubuntu installer doesn't show the "along with windows 7 option"only it is showing two options. I read some questions and answers posted on this community. Specially following link Ubuntu 12.04 does not see windows already install on my computer (dual installation) I tried following thinks, I ran the terminal in live CD and tried sudo dmraid -rE command and dmraid remove command .But terminals says there is no dmraid partitions. So I tried another scenario checked my partitions with g parted.There are some partitions labeled C,HP tools,Recovery and System. C is containing windows 7 Files. So I shrank the volume of C Drive. Now I have 50000Mb of unallocated disk. I tried with Gparted to create a partition on that allocated space.It says some thing that you can't create more than four primary partition.Of course all other four partitions were created on widows are actually type of primary partition. So I went back to Windows 7 and tried to create a new volume on unallocated space.But unfortunately it says,If i create a new volume it will be the type of Dynamic partition.It says we cant boot another OS from that partition. So i cancelled that step. Now i have 50000Mb unallocated space but how can i install Ubuntu on that partition without harming the existing Windows 7? Because still I have only two options: Erase and install Ubuntu. Try something else. (I can see my unallocated space by going to "something else" option.)

  Read the article

• Problems with microphone and network

  - by AnoonymoouS

  Hello... very good day everybody! I'm having some problems regarding the Ubuntu 12.4.01 LTS. For this reason, cordially i ask everyone's help. Such problems can be summed up in network (01) and audio (02)! 01) I can not set a DSL network settings in the "upper bar" (on side the clock). When i create the connection, the system says that the cables modem are disconnected! I can only use the internet if i set up a connection at terminal through the command "pppoeconf". Follows the print screen of what i mentioned above:. http://i.imgur.com/8nTrF.png Obs.: Note that even after the connection "created", it does not appear there! 02) The sound is reproduced; however, can not be captured! I can not make recordings, obviously i can't use the microphone. I believe that something is giving interference or the settings are wrong! Follows the video of what i mentioned above:. http://dl.dropbox.com/u/41085750/Projeto%20Padr%C3%A3o.mp4 Obs.: I'm listening to music, so that interference errors may appear in the video. By kindness; who can help me... help me! I sought help at various sites and forums but unfortunately, i did not get success. I wait anxiously for a direction. Regards, Anoonymoous.

  Read the article

• Need to run a .sh as root on boot or login

  - by Graymayre

  Still new with linux and running ubuntu 12.10 I have a wireless stick (ae2500) which has known issues that has been partially solved using ndiswrapper. However, to use it I must run the same scripts every time I reboot, effectively uninstalling and reinstalling the driver. I made a .sh file to run every time to make it easy, but I must do the sudo login everytime. There are three solutions I am looking for and although not all are necessary to solve this particular problem, I would still like to know them all for learning purposes. run scripts or file.sh on boot (as well as other programs) run scripts or file.sh automatically with root privileges make the install permanent so as not to have to go through the process every time. Any additional information that can help me regarding this that I did not think to ask (including streamlining my commands), or general knowledge, would be greatly appreciated. Following are the contents of the file. I pretty much just made it as I would have entered it. cd ~/ndiswrapper-1.58rc1 sudo modprobe -rf ndiswrapper sudo rm /etc/modprobe.d/ndiswrapper.conf sudo rm -r /etc/ndiswrapper/* sudo depmod -a sudo make uninstall sudo make sudo make install sudo ndiswrapper -i bcmwlhigh5.inf ndiswrapper -l sudo modprobe ndiswrapper

  Read the article

• Ubuntu 12.04 using b43-fwcutter

  - by Nathan

  I have used 10.04 with the b43-fwcutter driver to drive my BCM4318 Broadcom card (a Linksys WPC54G v3) on my old Dell Inspiron 8100 for two years+ with no troubles. I just upgraded to 12.04 and although everything worked fine after install, before I added the b43-fwcutter driver, once I installed the driver, the system refuses to boot. Even before I install the Linksys card!! It just hangs on boot with graphical garbage on the screen. I tried several attempts to recover the system using the live CD, and finally reinstalled completely. I have been thru the cycle, install fresh system, verify everything works, then install b43-fwcutter and it is hung, several times. Consistent hard fail. The system runs fine on hardwire Ethernet, and wireless was fine on 10.04. But I cannot get there with 12.04. So after several attempts, I am now ready to admit defeat and ask for help. I have read every thread that search turned up, and either the advice is to do what I did, i.e. install fwcutter, or does not apply (Different Broadcom, STA, legacy, whatever) So what do I need to do to fix it? Or is the B43-fwcutter driver broken for 12.04? Thoughts? Tips? Log files needed??

  Read the article

• Multiple displays using AMD drivers

  - by Halik

  I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

  Read the article

• Keyring no longer prompts for password when SSH-ing

  - by Lie Ryan

  I remember that I used to be able to do ssh [email protected] and have a prompt asks me for a password to unlock the keyring for the whole GNOME session so subsequent ssh wouldn't need to enter the keyring password any longer (not quite sure if this is in Ubuntu or other distro). But nowadays doing ssh [email protected] would ask me, in the terminal, my keyring password every single time; which defeats the purpose of using SSH keys. I checked $ cat /etc/pam.d/lightdm | grep keyring auth optional pam_gnome_keyring.so session optional pam_gnome_keyring.so auto_start which looks fine, and $ pgrep keyring 1784 gnome-keyring-d so the keyring daemon is alive. I finally found that SSH_AUTH_SOCK variable (and GNOME_KEYRING_CONTROL and GPG_AGENT_INFO and GNOME_KEYRING_PID) are not being set properly. What is the proper way to set this variable and why aren't they being set in my environment (i.e. shouldn't they be set in default install)? I guess I can set it in .bashrc, but then the variables would only be defined in bash session, while that is fine for ssh, I believe the other environment variables are necessary for GUI apps to use keyring.

  Read the article

• Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

  - by Giuseppe Della Corte

  I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

  Read the article

• Ubuntu 12.04 slow boot on ASUS, attached with dmesg and bootchart

  - by stanleyhunk

  I heard that Ubuntu can boot up around 30sec, but I take more than 60sec every time my Ubuntu boot. I also read some forum said need to post the dmesg and bootchart to identify which process slowing down the booting time, as I'm not expert in Ubuntu and wish to learn more about it, I humbly ask any pro here to teach me how. My laptop specs: Model : ASUS K45VS RAM : 8MB CPU : Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz x 8 Graphic Card : nVidia GeForce GT 645M HDD : 750GB OS : Single boot Ubuntu 12.04LTS System.uname : Linux 3.8.0-39-generic #58~precise1-Ubuntu SMP Fri May 2 21:33:40 UTC 2014 x86_64 System.release : Ubuntu 12.04.4 LTS System.kernel.options : BOOT_IMAGE=/boot/vmlinuz-3.8.0-39-generic root=UUID=c8a71503-bce8-406c-9a5f-5aa8284f5c7c ro quiet splash My dmesg (which highlighted to the huge time frame gap): [ 30.772656] cgroup: libvirtd (1961) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772659] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 30.772683] cgroup: libvirtd (1961) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772710] cgroup: libvirtd (1961) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 32.140335] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X [ 32.505619] ACPI Error: Field [TMPB] at 1081344 exceeds Buffer [ROM1] size 262144 (bits) (20121018/dsopcode-236) [ 32.505624] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP._ROM] (Node ffff880224e91f00), AE_AML_BUFFER_LIMIT (20121018/psparse-537) [ 802.034422] audit_printk_skb: 69 callbacks suppressed [ 802.034428] type=1400 audit(1400914804.392:35): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" [ 1581.300901] type=1400 audit(1400915584.816:36): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" My Bootchart.png: Looking forward to learn to improve both my booting time and knowledge. Thanks in advance :)

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >