Search Results

Search found 8656 results on 347 pages for 'boot to vhd'.

Page 34/347 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Make backup image (.tib/.vhd) as my main operating system?

  - by Joann

  My old hard drive is dying so I want to move my Windows 7 operating system to another hard drive. They say cloning using Acronis would do the trick, but for some reason it refuses to work. I also tried EASEUS Todo Backup, but it doesn't work either. Can you recommend some suggestions on how to transfer my operating system? I heard about converting .tib to .vhd and then booting from it, but does that achieve the same effect as cloning?

  Read the article

• ISO booting with grub2 in Ubuntu on an Apple

  - by Robert Vila

  I have Ubuntu with grub2 installed in an Apple Macbook pro with dual boot (using rEFIt), and I would like to use grub2 to boot the LiveCD ISO image of a system based in Debian too (CrunchBang). The ISO image is saved in the same hard disk, same partition as Ubuntu. I can easily boot many other LiveCD ISO images, but I cannot boot this one, and I cannot boot the MacOS system, from the grub menu, either. The installation of Ubuntu left a couple of menu entries to boot MacOS, but they never worked. SO I don't know if it is possible to boot them, and how. I have tried many options, but the menuentry I am trying now to boot crunchBang is this one: menuentry "crunchbang-10-20120207-i386.iso" { set isofile="/home/user/Desktop/ISO/crunchbang-10-20120207-i386.iso" loopback loop (hd0,3)$isofile linux (loop)/live/vmlinuz1 iso-scan/filename=$isofile toram=filesystem.squashfs findiso=$isofile boot=live config -- initrd (loop)/live/initrd1.img } And I copied it from here: http://linux4netbook.blogspot.com.es/2012/08/due-crunchbang-e-un-pennino.html

  Read the article

• Create a CDROM Bootdisk to update BIOS

  - by osij2is

  So, I have a Tyan Opteron board with a very old BIOS version. I realize Opteron's aren't exactly common like Athlons, Phenoms, Intel CPUs, etc. but my question revolves around updating the BIOS, however I don't have a floppy drive and there's no option to boot off of a USB key. Tyan has incomplete instructions on their website (link) on how to flash the BIOS via USB. So my second tactic has been to create a Windows 98 boot-able CDROM with the flash utilities on it. It's been years since I've made one but after going to sites like bootdisk.com and such I haven't had any success. Can anyone tell me step-by-step how to make a boot-able Windows 98 CDROM? I can't believe I'm having such a hard time doing this but I've failed on four different attempts and I must be doing something wrong or I'm not accounting for something.

  Read the article

• Grub loading, please wait. . . Error 22

  - by Aexyn

  Yesterday I got a problem which I posted here. Trying to solve it, I installed slitaz live CD to desktop. After that I tried to use boot other live CD's (Ubuntu, Tiny core) but they didn't boot. So I deleted the the slitaz partition through gparted(or something like that) and restarted. After that I am seeing this error message:` GRUB Loading stage 1.5. Starting cmain() ... GRUB loading, please wait... Error 22` UPDATE: I have tried Backtrack live CD to live boot laptop but that doesn't work too.

  Read the article

• Misused mke2fs and cannot boot into system

  - by surlogics

  I installed Ubuntu with WUBI in Windows 7 64bit, and I had installed Mandriva 2011 with a disk. I tried to learn Linux with Ubuntu and misused mke2fs; after I reboot my computer, Windows 7 and Ubuntu has crashed. As I have Mandriva, I boot into Mandriva and found # df -h /dev/sda7 12G 9.8G 1.5G 88% / /dev/sda2 15G 165M 14G 2% /media/logical /dev/sda6 119G 88G 32G 74% /media/2C9E85319E84F51C /dev/sda5 118G 59G 60G 50% /media/D25A6DDE5A6DBFB9 /dev/sda9 100G 188M 100G 1% /media/ae69134a-a65e-488f-ae7f-150d1b5e36a6 /dev/sda1 100M 122K 100M 1% /media/DELLUTILITY /dev/sda3 98G 81G 17G 83% /media/OS # fdisk /dev/sda Command (m for help): p Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd24f801e Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 6 FAT16 /dev/sda2 * 206848 30926847 15360000 7 HPFS/NTFS/exFAT /dev/sda3 30926848 235726847 102400000 7 HPFS/NTFS/exFAT /dev/sda4 235728864 976771071 370521104 f W95 Ext'd (LBA) /dev/sda5 235728896 481488895 122880000 7 HPFS/NTFS/exFAT /dev/sda6 727252992 976771071 124759040 7 HPFS/NTFS/exFAT /dev/sda7 481500243 506674034 12586896 83 Linux /dev/sda8 506674098 514851119 4088511 82 Linux swap / Solaris /dev/sda9 514851183 727246484 106197651 83 Linux Partition table entries are not in disk order I think I may used the following command mke2fs -j -L "logical"/dev/sda2 but I had forgotten what kind of partition it was before I transfered it into ext3. perhaps ntfs Data was not lost, and I can view my files as I could in Windows. In Mandriva, there are following disks: 117.2 GB hard disk, files in it is the same as my Windows D:, and Ubuntu was installed in it; 119.0 GB hard disk is my G:, with my personal files in it; 12.0 GB is the same with Mandriva / (with means root), 101.3 GB hard disk with nothing but lost+found; DELLUTILITY should be Dell computer utilities pre-installed in my computer; logical is the disk which I had spoiled, I can view nothing but lost+found; and OS is the C: in my Windows. After I boot, grub lets me choose Mandriva or Windows. I chose Windows and it tells me: FILE system type unknown, partition type 0x7 Error 13: Invalid or unsupported executable format I doubt something wrong with windows MBR or something # cat /boot/grub/menu.lst timeout 5 color black/cyan yellow/cyan gfxmenu (hd0,6)/boot/gfxmenu default 0 title linux kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot logo.nologo quiet resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd splash=silent vga=788 initrd (hd0,6)/boot/initrd.img title linux-nonfb kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd initrd (hd0,6)/boot/initrd.img title failsafe kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot failsafe initrd (hd0,6)/boot/initrd.img title windows root (hd0,1) makeactive chainloader +1 I can boot into Linux, but not Ubuntu, it boot into Mandriva. I don't have a boot disk. Help me find a way to make it work again.

  Read the article

• Windows 2000 uninstall on a dual-boot 2000/XP system

  - by Viktor

  While several questions have already been answered about removing an OS from a dual-booting machine, most refer to Windows 7 vs. Linux/Vista/XP. I have W2K installed on my older HDD (Drive C). Later on I bought a new HDD and installed XP's under W2K environment. Each time I turned my PC on, I had the choice of W2K or XP OS, which I still have. I eventually stopped using the w2k OS and as the older HDD where this OS is installed is getting old, I plan to remove it completely. The problem is that the active master boot record is on this very HDD. So when I remove the HDD, I get no OS loader, no matter what boot drive I choose in BIOS. Apparently I have to set the boot record on the newer HDD with XP's. Some advise to use the bootable XP CD and try to set the active MBR from there.. I don't have the CD anymore. Regardless, I suspect there is much less to solving this problem than running the recovery console, like a simple boot.ini file edit. But I might be wrong.

  Read the article

• Triple boot WIndows 7, Windows 8, and Mountain Lion on Macbook Pro

  - by Nathan

  Ok, So I have a bit of a unique situation here I could use some help on. I've modded my summer 2011 MBPro to have 2 harddrives by replacing the optical drive. OSX Mountain Lion is installed on a single partition of a 120GB SSD. The second drive is 750GB, partitioned as 550GB, 150GB, and ~50GB. I've set the 550GB to act as my OSX homefolder, but I'd like to install windows 7 and Windows 8 on the remaining partitions. It Took a while, but by following this guide, I eventually found a way to install Windows without a CD/DVD drive by following this http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdrive-with-virtualbox/ It worked flawlessly for creating both windows 7 and windows 8 images that I could clone onto FAT32 partitions. However, I have encountered a problem when trying to triple boot. After I put Windows 8 onto the ~50GB partition and tried to boot into windows 7 I get an error that says something like: error: 0x0000000e The Boot selection failed because the required device is inaccessible. If I re-clone the windows 7 image onto the drive and select the option to "replace BCD" file for the drive, windows 7 will boot but windows 8 now gives me the same exact error. I realize this is a pretty extensive setup, but if anyone has some insight I'd love to hear it.

  Read the article

• Dual boot nt4 and windows 98

  - by ItFinallyWorks

  I am trying to dual boot nt4 and windows 98 se (don't laugh - old computer). I have seen Microsoft's instructions for doing this, but it limits windows 98 to have a Fat16 partition (NT4's NTLDR doesn't understand FAT32) and therefore only 2GB of disk space. I really need it to have more than that. I started with Win 98 (on the 1st partition), repartitioned the disk, then added NT4 on the 2nd partition. NT4 took over the bootloader (as expected), so NT4 boots, but Win 98 doesn't. Right now I am working in VMWare so I can use nonpersistent hard drives (IDE like the real computer) to recover from errors easily. I've tried using XPs NTLDR using the instructions here: http://www.nu2.nu/fixnt4/ , but I got weird errors from NT4 and it never really worked. If XP's NTLDR would work, that should be able to boot both OSes. I've also tried using GRUB. In theory that should work. In fact when booting from super grub disk, it does. But as soon as I install grub to disk, Win 98 boots, but NT 4 blue screens at boot with a 0x0000007b inaccessible_boot_device error (that can be alot of things see MS kb 822051). The incantation I'm using for GRUB 1 is rootnoverify (hd0,1) makeactive chainloader +1 boot So, anybody have some suggestions?

  Read the article

• No OS will boot, all freeze

  - by Gyan

  This is for a computer with the following configuration: Asus P5KPL-AM/PS motherboard Pentium D 820 (dual core 2.8 GHz) 1 x 2 GB DDR2-800 Transcend RAM 1 SATA2 Samsung 160 GB HDD 1 PATA LG CD/DVD Writer PS/2 generic Keyboard USB Razer mouse The computer was working fine till a month ago with a Hitachi HDD in place of the Samsung. But that drive died and I sent it in for warranty replacement. Since then and till last week, the computer had not been turned on. I then got hold of a spare but XPSP2-loaded Samsung drive from another computer and decided to get this computer temporarily running. However, when I tried to boot into XP, it didn't load. It got stuck at the first graphical screen. When trying Safe Mode, the file list would be updated up to diskio.sys and then freeze. If I tried to boot Kubuntu off a CD, I would get past the first menu, but then get stuck at the subsequent graphical interface in the loading process. A similar thing happend with a friend's Windows XP-on-a-pen-drive. I switched the RAM into the other slot, but no luck. Then I booted the Ultimate Boot CD and ran Memtest86+ and a couple of the bundled CPU stress tests but these detected no errors. Some searching on the Internet brought up the notion of the CPU failing to switch from "real" to "protected mode". I'm hoping to get a fix on what the problem is and what I can do about it. Edit: I've flashed to the latest BIOS, but that doesn't help. Also, Knoppix LiveCD also freezes. I notice that the LED in my mouse goes off at the time of freeze, but trying to boot without the mouse connected produces the same result.

  Read the article

• Windows XP Boot Issue - Diagnosing A Hard Drive Failure

  - by duffymo

  My five-year-old HP desktop running Windows XP SP3 wouldn't boot from the hard drive yesterday afternoon. I would see the boot sequence begin, then nothing but a black screen. Fortunately, I had just done an Acronis backup to my external drive in the morning, and I have a bootable USB key. I put the USB key into the drive, powered up the machine, and put the USB key first in line in the boot sequence. Voila! My machine came alive. But now I'm confused as to what the problem is and what to do next. I assumed that my hard drive was toast. But now that the machine is alive I can see files on my C: drive that have changes I made just yesterday. Clearly the drive is not dead. Here are my questions: What could explain my inability to boot from the hard drive? What would a remedy be? What's my best course of action? Should I replace the hard drive with a new one? If I replace the hard drive, do I reinstall the OS and apply the backup I did yesterday? If I decide that re-installing Windows XP makes no sense, how do I get back the Acronis backup that I did yesterday? I don't want to lose that. UPDATE: I just learned one more key fact. I'm having some work done on my house. I neglected to shut my machine down before the contractor came. My wife said he shut down the power to do some work on a circuit and then powered the house back up. I have a surge protector, but is it possible that cycling the power did some damage?

  Read the article

• LG LW20 Express won't boot after hdd replace

  - by Mika

  My old laptop (LG LW20 Express) got a hdd failure and I replaced the hdd. Now the laptop won't boot from cd or usb. I'm trying to install ubuntu on it. When I turn the laptop on it shows me the startup screen but when it should be the time to load operating system it just gives a black screen and starts over. This loop continues until I shut down the laptop. I created the usb boot drive following this guide https://help.ubuntu.com/community/Installation/FromUSBStick/ I used my boot cd to install ubuntu on this machine I'm using right now. So at least the cd should work. From the BIOS I can see that my newly installed hdd is recognized and put as a secondary master. Also the cd and removable media are in the boot list before hdd. The laptop runs pretty hot. The fan is at full speed pretty soon after the laptop is turned on. Earlier I suspected that it would have been the almost broken hdd that would have produced that heat but there obviously is something else also. Any ideas what to check?

  Read the article

• "A disk read error occurred" after choosing to boot into Windows XP from GRUB

  - by kellogs

  "A disk read error occurred" appears on screen after choosing to boot into Windows XP from GRUB. [root@localhost linux]# fdisk -lu Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x48424841 Device Boot Start End Blocks Id System /dev/sda1 63 204214271 102107104+ 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 204214272 255606783 25696256 af HFS / HFS+ Partition 2 does not end on cylinder boundary. /dev/sda3 255606784 276488191 10440704 c W95 FAT32 (LBA) Partition 3 does not end on cylinder boundary. /dev/sda4 276490179 312576704 18043263 5 Extended /dev/sda5 * 276490240 286709759 5109760 83 Linux /dev/sda6 286712118 310488254 11888068+ b W95 FAT32 /dev/sda7 310488318 312576704 1044193+ 82 Linux swap / Solaris Here, sda is a 160GB hard disk with quite a few partitions and 3 OSes installed. I am able to boot into Linux and Mac OS fine, but not into Windows anymore. The Windows system is located on /dev/sda1. I cannot recall how exactly have I used testdisk but it once said: Disk /dev/sda - 160 GB / 149 GiB - CHS 19458 255 63 The harddisk (160 GB / 149 GiB) seems too small! (< 169 GB / 157 GiB) Check the harddisk size: HD jumper settings, BIOS detection... So far I have tried to "fixboot" and "chkdsk" from a recovery console on the affected windows partition (/dev/sda1), the plug off power cord for 15 seconds trick, reinstalling GRUB, repairing the MFT and boot sector of the affected partition via testdisk, what next please? Thank you!

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. Is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions?

  Read the article

• HP tx2510us shuts down without warning, now won't boot, no BIOS codes, screen doesn't light

  - by Tim S

  Hey all, HP tx2150us worked great for a year and a half, rarely it would shut down instead of sleeping. It started running hot sometimes, I installed Win7, worked great, still running hot. Before Xmas, it gave me evidence of video errors - jagged lines, rows missing. That same night, it started rebooting, then it shut off and wouldn't boot. It gave me a BIOS code, I shut it off to look up the code online. When I turned it on again, it won't boot at all. The LEDs all light up, the fan, HD, and optical all spin up, but the screen never lights up and it doesn't try to boot, nor does it blink any BIOS codes. It just acts like it's sleeping, and won't wake up. I suspected heat problems, so I disassembled it, cleaned the crap out of the fan, and reassembled it, breaking the stereo mic connector. Oh well. When I reassembled it, it booted up into Win7 again, but kept shutting down for no discernible reason. After a dozen or so random reboots like that, it is now back to where it was - turns on but doesn't boot or give BIOS codes. The screen never lights, and everything spins up then idles. Any ideas? I really can't afford to buy a new one and I use(d) it to take ALL my notes, that's why I got a tablet in the first place.

  Read the article

• Use GRUB/GRUB2 to PXE boot OS image

  - by Jack

  Asked this in stackoverflow but they recommended I post this here: Here is the situation I am in: I currently have a Windows drive that boots XP. The BIOS does not support PXE booting so this is out of the question. Therefore, I was thinking I could install a customized GRUB bootloader on it instead such that it will have the option to PXE boot an image from a DHCP server connected to it and have the option to load Windows as it normally does (two items in menu). The catch is it may need to be automated (meaning no keyboard), so is there any way to run a script pre-boot during GRUB loading that determines if DHCP / TFTP servers are running and attempt to PXE boot an image from the network (and if not, say timeout of 10 seconds, regularly boot from Windows drive)? If this is not possible, what are some other options / suggestions? I was reading up on grub4dos as well but I'm not sure that is what I need. FWIW, I'm free to do whatever I want to the drive. I'd really appreciate some help on this as I'm not sure where to start. Thanks!

  Read the article

• Use GRUB/GRUB2 to PXE boot OS image

  - by Jack

  Asked this in stackoverflow but they recommended I post this here: Here is the situation I am in: I currently have a Windows drive that boots XP. The BIOS does not support PXE booting so this is out of the question. Therefore, I was thinking I could install a customized GRUB bootloader on it instead such that it will have the option to PXE boot an image from a DHCP server connected to it and have the option to load Windows as it normally does (two items in menu). The catch is it may need to be automated (meaning no keyboard), so is there any way to run a script pre-boot during GRUB loading that determines if DHCP / TFTP servers are running and attempt to PXE boot an image from the network (and if not, say timeout of 10 seconds, regularly boot from Windows drive)? If this is not possible, what are some other options / suggestions? I was reading up on grub4dos as well but I'm not sure that is what I need. FWIW, I'm free to do whatever I want to the drive. I'd really appreciate some help on this as I'm not sure where to start. Thanks!

  Read the article

• PC won't boot from IDE HDD when SATA data drive connected

  - by Kevin

  I have an old Pentium 4 system running XP. The machine is set up as an HTPC. It was set up and running well with 1 SATA drive as a boot drive, another SATA drive to store TV recordings, and an IDE drive to store more recordings. Last week the original boot drive (a SATA drive) failed. The BIOS would no longer recognize it. I had a disused IDE drive hanging around that was large enough for the OS, so I reformatted it and installed XP on it. Now the system will only boot if I do not connect the remaining healthy SATA data drive. All three drives are recognized by the BIOS, and I have set the boot order so that the IDE drive with XP on it has top priority, but after the BIOS recognizes the drives, etc. I just get a black screen. I know the SATA drive is functional, because if I hot plug the drive AFTER the system is booted (I know I'm not supposed to do this), I can go into the control panels and mount the drive, and see all the files and folders on it in Windows Explorer. Any suggestions on what is going on and how to fix it? Many thanks.

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• SATA disks boot order?

  - by kire

  I have a computer with 4 SATA disks connected, 2 to the motherboard and 2 to a PCI-card. I've moved all the disks from other computers so 2 of them already has windows installed, the other 2 has just had data on them. I know one of the windows installations works and i want to use this install. If i only have this disk connected the computer boots fine. The problem is that when i boot with all 4 disks connected i get an error message about not being able to boot. This message is in swedish(the wrong windows installation is swedish) so it has to come from that installation. Ok, that means it is trying to boot from wrong disk, i try to pull out that disk but then i get the same error in english. I pull out the fourth disk instead I get another error about NTLDR not being able to load. If i disconnect all drives except the one with the correct windows installation, windows boots fine and i can also connect the other drives while windows is running and browse around in them without any problems. I have no clue what to do. In my BIOS setup i can only select SATA as boot-option, not the order of the disks. I also tried to remove what's left of windows on the other disk by simply deleting everything in explorer(got hidden- and sytstem-files visible). Both windows installations are XP btw. Edit: I switched the cables around and now it magically works. :)

  Read the article

• Recovering from 'grub rescue>' crash

  - by DocSalvage

  I did a dumb thing... I forgot that Ubuntu 10.04 (Lucid) switched to Grub2 which puts a ton of *.mod files (kernel modules) in /boot/grub. I thought they were soundtrack files put there erroneously and moved them. Needless to say, the next reboot was traumatic. I was presented with something I had no memory of ever seeing... a 'grub rescue' prompt. With the help of how-to-fix-error-unknown-filesystem-grub-rescue however, I was able to recover... Discovered that Grub Rescue does not have 'cd', 'cp' or any other filesystem commands except its own variation of 'ls'. So first I had to find the partition with the /boot directory containing vmlinuz... and other boot image files... (failed attempts not shown) grub rescue> ls (hd0,4) (hd0,3) (hd0,2) (hd0,1) grub rescue> ls (hd0,2)/boot ... grub ... initrd.img-2.6.32-33-generic ... vmlinuz-2.6.32-33-generic Then manually boot from 'grub rescue' prompt (no command history either!)... grub rescue> set root=(hd0,2)/boot grub rescue> insmod linux grub rescue> linux (hd0,2)/boot/vmlinuz-2.6.32-33-generic grub rescue> initrd (hd0,2)/boot/initrd.img-2.6.32-33-generic grub rescue> boot This boots and crashes to the BusyBox prompt which DOES have some rudimentary filesystem commnds. Then I moved the *.mod files back to the /boot/grub directory... busybox> cd /boot busybox> mv mod/* grub busybox> reboot The reboot was successful but that was a lot of work. Is there an easier way?

  Read the article

• Grub menu not waiting despite of GRUB_TIMEOUT=10

  - by Optimus

  I have Ubuntu 12.04 installed along side of windows 7. The grub menu doesn't seem obey GRUB_TIMEOUT=10, I see the grub menu there for a split second and it immediately defaults to the first option. Grub menu worked fine when I first installed ubuntu. I am not able to pinpoint what exactly broke it(maybe some update?). I did resize my ubuntu partition using gparted but am not sure if that is what caused it. here are my settings from etc/default/grub GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" How do I fix this? Edit: As suggested by 'kamil' this is what I have tried so far with no luck - 1) hold the shift key while booting 2) sudo gedit /etc/default/grub edit GRUB_TIMEOUT to `GRUB_TIMEOUT=10` sudo update-grub 3) sudo gedit /etc/default/grub edit GRUB_TIMEOUT to `GRUB_TIMEOUT=10` sudo update-grub2 4) at the end of your /etc/grub.d/00_header file, comment out the if condition except for the regular set timeout line like this: #if [ \${recordfail} = 1 ]; then # set timeout=-1 #else set timeout=${GRUB_TIMEOUT} #fi then sudo update-grub and sudo update-grub2 5) install boot repair sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install -y boot-repair boot-repair boot-repair output - Boot successfully repaired. ... The boot files of [The OS now in use - Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) http://paste.ubuntu.com/1220468/ - here is the full boot-repair data Could grub files not being at the start of the disk create such issues?

  Read the article

• dual boot xp/xp, now win7/xp getting no xp

  - by ped

  I have a laptop on which I have two drives with separate XP installs, one barebones for music production, the other "normal" XP with Office etc. (Unfortunately the bios won't give a boot disk choice) Normally I would be presented with two WinXPs on booting. Selecting the second one would get me into the "normal installation on disk 1 (C).Selecting the first in boot order would give me D: (disk 2) withe barebones XP. However, I installed Windows 7 Home onto disk 1 (C:), but there were no dual boot options anymore, even though I installed DualBoot Pro and added WinXP disk D:. The options now show show up, but seletcing Win XP just turns into a reboot back to where I started. Any help would be much appreciated

  Read the article

• Recovering Ubuntu 9.10 /Windows 7 dual boot with Wubi

  - by user56110

  I had installed Ubuntu 9.10 /Windows 7 dual boot with Wubi. I had no issues for about 9 months, and then after having to do a force reboot after ubuntu got hunng, and never goes past boot-up. On boot up, and selecting ubuntu, I get this error message: One or more of the mounts listed in /etc/fstab cannot yet be mounted: /: waiting for /dev/loop0 /tmp: waiting for (null) Press ESC to enter a recovery shell When I enter the recovery shell, I get this error message: General error mounting filesystem A maintainance shell will be started The maintenace shell does start- and I am able to access files. However, X-server does not work, so gedit, and similar applications does not work. I have done chkdsk on Windows, and this didnt solve nmy problem. From what I have been reading online,I have seen quite a few posts advising against wubi ubuntu installation, and generally to the effect that 'do a clean install' I found that the person on this thread has faced an identical issue, but he had to do a re-install http://ubuntuforums.org/archive/index.php/t-1051277.html Can I make my ubuntu box work right, as it was before? :-)

  Read the article

• Windows 7 Boot Screen Resolution/Aspect Ratio

  - by Joe

  I have been using my Windows 7 PC with my 46" Samsung HDTV with 1920x1080 resolution. The boot screen seems to always be at 1024x768 resolution and the aspect ratio doesn't match the 1080p ratio. I read on a msdn blog that microsoft only made the boot screen in one type of resolution so that cannot be changed. The result is that on my TV the boot screen seems to look stretched out. Is there a way to make change the aspect ratio or crop it in someway? Is there any method at all to make it look normal or just better without being stretchy looking?

  Read the article

• How to boot between OSes from inside each OS? in a Windows/Ubuntu dual boot system

  - by TheCompander

  My ideal scenario is that there is a script/command to boot into the alternate OS from the current OS you are in, restarting the same OS without running the script/command will return it to the same OS. Currently I have grub setup to remember the last OS booted, using GRUB_DEFAULT=saved and GRUB_SAVEDEFAULT=true, I'd like to keep this option. I have read about the ability to manipulate grub from within Ubuntu to boot into windows, shown in this link. Is there a way to similarly boot into Ubuntu from within Windows? I am primarily connecting to this device remotely and hence my query.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >