Search Results

Search found 1246 results on 50 pages for 'busy'.

Page 34/50 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• GTX 280 purple snow on bootup, card works without drivers

  - by Brokar

  i have owned a ASUS GTX280 for 3 years now. The card has been great all along but i started having problems 10 days ago. I was playing Diablo 3 for 1 week on max settings no problems, then suddenly my display kept getting some weird purple/colours as soon as i booted and logged into windows. Went into safe mode, updated drivers and it kept crashing. Formatted PC, fresh windows install with new WHQL drivers again same problem. Uninstalled nvidia drivers and pc has been running great for 4 days now, ofcourse i cannot run games but everything works on 1680x1050 resolution and i can browse internet,watch movies and use my PC for everything but gaming. As soon as i install nvidia drivers PC won't boot. I only wanna game a few hours a week (very busy program with school this month so it might be a blessing that i cannot game) and i would love it if i could keep the card. I am looking to upgrde later on when i will have time for gaming but i wonder if i could still use the card somehow with different/new drivers (tried older drivers that came with the card on a CD aswell) tldr: PC works fine with no nvidia drivers (apart from gaming ofc). Once i install WHQL drivers or older ones, cannot even log into windows. Fix?

  Read the article

• Monit unable to start sidekiq on Opsworks server

  - by webdevtom

  I have used AWS Opsworks to create some servers. I have Sidekiq running as part of my Rails application. When I deploy Sidekiq restarts nicely. I am configuring Monit to watch the pid and start and stop Sidekiq if there are any issues. However when Monit trys to start Sidekiq I see that the wrong Ruby looks to be used. Oct 17 13:52:43 daitengu sidekiq: /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler/definition.rb:361:in `validate_ruby!': Your Ruby version is 1.8.7, but your Gemfile specified 1.9.3 (Bundler::RubyVersionMismatch) Oct 17 13:52:43 daitengu sidekiq: from /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler.rb:116:in `setup' Oct 17 13:52:43 daitengu sidekiq: from /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler/setup.rb:17 When I run the command from the cli Sidekiq launches correctly. $> cd /srv/www/myapp/current && RAILS_ENV=production nohup /usr/local/bin/bundle exec sidekiq -C config/sidekiq.yml >> /srv/www/myapp/shared/log/sidekiq.log 2>&1 & $> ps -aef |grep sidekiq root 1236 1235 8 20:54 pts/0 00:00:50 sidekiq 2.11.0 myapp [0 of 25 busy] My sidekiq.monitrc file check process unicorn with pidfile /srv/www/myapp/shared/pids/unicorn.pid start program = "/bin/bash -c 'cd /srv/www/myapp/current && /usr/local/bin/bundle exec unicorn_rails --env production --daemonize -c /srv/www/myapp/shared/config/unicorn.conf'" stop program = "/bin/bash -c 'kill -QUIT `cat /srv/www/myapp/shared/pids/unicorn.pid`'"

  Read the article

• Problems with OpenVPN setup

  - by user70617

  Hi, I'm trying to set up a VPN server using OpenVPN and I'm getting some errors while trying to connect the client to the server. I'm getting the following error: Sun Feb 13 14:54:16 2011 OpenVPN 2.1.4 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] built on Feb 5 2011 Sun Feb 13 14:54:16 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Sun Feb 13 14:54:16 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sun Feb 13 14:54:16 2011 ******* WARNING *******: all encryption and authentication features disabled -- all data will be tunnelled as cleartext Sun Feb 13 14:54:16 2011 RESOLVE: NOTE: localhost resolves to 2 addresses Sun Feb 13 14:54:16 2011 Note: Cannot ioctl TUNSETIFF tap0: Device or resource busy (errno=16) Sun Feb 13 14:54:16 2011 Note: Attempting fallback to kernel 2.2 TUN/TAP interface Sun Feb 13 14:54:16 2011 Cannot open TUN/TAP dev /dev/tap0: No such file or directory (errno=2) Sun Feb 13 14:54:16 2011 Exiting I have bridge-utils installed and tap0 shows up in ifconfig. Can anybody give me a hand? Thanks in advance.

  Read the article

• Skype Connect as SIP/Trunk for Asterisk

  - by Kaurin

  First off: I'm not sure if this should be on superuser or here. I have recently built a few Asterisk boxes with OpenVOX FXO/FXS ports little or no trouble. My current project is building an Asterisk box with SIP trunks. My current employer insisted on getting Skype Business/Skype connect for that purpose. After reviewing the Skype Connect plan, I agreed, because I thought it is going to be straightforward: Purchase G729 licences and setup SIP trunk/trunks. Boy was i wrong :) Here is the setup: The setup is for calling US numbers only via skype (we got skype US minute bundles in skype connect) AsteriskNOW - Asterisk 1.4 + asterisk-gui Trunks: SIP Trunk configured with Skype Connect - shows as registered Users: 2 test extensions. Both work fine when calling each other, voicemail etc works fine too The asterisk box is behind a Mikrotik router which i configured to forward all relevant ports: 5060-5090 UDP, 10000-20000 UDP. When trying out an extension outside of my LAN, it worked. I could make calls to the other extension. Outgoing rule: _NXXXXXXXXX Strip:0 Prepend:+1 Use skype trunk Inbound rule: Trunk: Skype Pattern: s Destination: Extension1 (6210) Here is the output of asterisk CLI (-rvvvvv) with outgoing calls: http://pastebin.com/eWVpL72e you can see the circuit-busy response when using trunk1 (skype) When calling my Skype Connect number from the outside, I get nothing in the logs. Can anyone with Skype Connect / Asterisk experience help out? :)

  Read the article

• auth.log is empty (Ubuntu)

  - by Vinicius Pinto

  The /var/log/auth.log file in my Ubuntu 9.04 is empty. syslogd is running and /etc/syslog.conf content is as follows. Any help? Thanks. # /etc/syslog.conf Configuration file for syslogd. # # For more information see syslog.conf(5) # manpage. # # First some standard logfiles. Log by facility. # auth,authpriv.* /var/log/auth.log *.*;auth,authpriv.none -/var/log/syslog #cron.* /var/log/cron.log daemon.* -/var/log/daemon.log kern.* -/var/log/kern.log lpr.* -/var/log/lpr.log mail.* -/var/log/mail.log user.* -/var/log/user.log # # Logging for the mail system. Split it up so that # it is easy to write scripts to parse these files. # mail.info -/var/log/mail.info mail.warning -/var/log/mail.warn mail.err /var/log/mail.err # Logging for INN news system # news.crit /var/log/news/news.crit news.err /var/log/news/news.err news.notice -/var/log/news/news.notice # # Some `catch-all' logfiles. # *.=debug;\ auth,authpriv.none;\ news.none;mail.none -/var/log/debug *.=info;*.=notice;*.=warning;\ auth,authpriv.none;\ cron,daemon.none;\ mail,news.none -/var/log/messages # # Emergencies are sent to everybody logged in. # *.emerg * # # I like to have messages displayed on the console, but only on a virtual # console I usually leave idle. # #daemon,mail.*;\ # news.=crit;news.=err;news.=notice;\ # *.=debug;*.=info;\ # *.=notice;*.=warning /dev/tty8 # The named pipe /dev/xconsole is for the `xconsole' utility. To use it, # you must invoke `xconsole' with the `-file' option: # # $ xconsole -file /dev/xconsole [...] # # NOTE: adjust the list below, or you'll go crazy if you have a reasonably # busy site.. # daemon.*;mail.*;\ news.err;\ *.=debug;*.=info;\ *.=notice;*.=warning |/dev/xconsole

  Read the article

• Apache 2.4 Prefork vs. PHP-FPM Event shows sig decrease in requests per second

  - by Mark

  On my Apache 2.4.2 server with a standard mod_php Prefork setup these are my server-status results Current Time: Wednesday, 24-Oct-2012 19:36:24 CDT Restart Time: Wednesday, 24-Oct-2012 01:27:30 CDT Parent Server Config. Generation: 1 Parent Server MPM Generation: 0 Server uptime: 18 hours 8 minutes 54 seconds Total accesses: 14304233 - Total Traffic: 342.3 GB CPU Usage: u12584.6 s721.93 cu.66 cs3.43 - 20.4% CPU load 219 requests/sec - 5.4 MB/second - 25.1 kB/request 507 requests currently being processed, 355 idle workers ______KKKKR_K______W_KKC___CKK_K_K_W__CC_KKK_KK._K_K_KK._KKKK_K_ K_____KK_KKKK_K_KK__K___KK_K___K_____CKKK_WK_K_____KCKK__K___K_K K_CK_K_K_____K__KKKK_K__K___K_KK_K_K_KKKCK____________KK_CK__KKK __C_KKKKKKK___CK___C_KKK_K__C__K_CK____KKK__K__K__K_K__KK_CK_K__ _KKKKK_K_W__KK______K___K__W___C_K__K____KKKKKKKK.KKKKKKKCK_K___ _C_KK_K_WK__K_KK__K__RK_KK___K____K_KK_K_K___RKC_KKKK___KKKC_K_W _C_KK_KK__W____KC__KKK__KKK___K___KKK_KK_K_KKW__K_KR_KK_KK__KKK_ R__KKK__KKKKKK__K_KKKKK_K__K_K___KKW_________KK_K___KKK___KK.K_C KKKKKKW_____K__K_KKC_KCKK_K_KK_K__KK__K___K__KK_KK__________KK__ __K___KK_K__K_C_KK_K___KK__KK__K__KCK_K__KK_________K_K_KK__.K__ K_CKK.CCRW__KKKKKKKKKKKC__W____K___KWK_KK_KKC______.K_K_KK_KKKC_ __KKK_W_KCKKK_K_K____CCCK__KC_KKKK_K____K_CK_K____K__K____KKK_KK KK___K_K_K__KW__KCKKKK____WKWK__K_KKRKK__C_K_KK_KK_K__KKCC_K__C_ KK_K___K_KK______K_____CKK_K_______KK_CKCK__KKKKK____K__K..K____ __KKWK_KW__KKK__K_KKK___K_KK_KKK__KK___KK___KK_KK___KK____KKWKKC KK_KKKK_................................` When I switch to a PHP-FPM setup with the Event MPM with no other variables changes, my requests/sec plummet and overall apache response is garbage. Current Time: Wednesday, 24-Oct-2012 19:51:21 CDT Restart Time: Wednesday, 24-Oct-2012 19:48:03 CDT Parent Server Config. Generation: 1 Parent Server MPM Generation: 0 Server uptime: 3 minutes 18 seconds Total accesses: 18720 - Total Traffic: 307.1 MB CPU Usage: u16.57 s4.74 cu0 cs0 - 10.8% CPU load 94.5 requests/sec - 1.6 MB/second - 16.8 kB/request 15 requests currently being processed, 49 idle workers PID Connections Threads Async connections total accepting busy idle writing keep-alive closing 11701 114 no 10 22 0 66 38 11702 134 no 5 27 0 81 48 Sum 248 15 49 0 147 86 __R_R__W___RRW________RR__R___W_W_______W_____W_____________R_R_ Is there any obvious reason anyone could think of why this would be the case. I can provide any other additional stats or server setup info to help out. Ive tried tweaking everything up and down and nothing really helps get the PHP-FPM setup anywhere near a baseic prefork/mod-php setup. Thanks!

  Read the article

• Skip all warning prompts on ACPI shutdown?

  - by N Rahl

  When I issue an ACPI shutdown command to a Windows XP guest machine from the host VM server, I want Windows to shutdown. The problem is, Windows always wants to ask some question or another, rather than just shutting down. I need shutdown to be reliable, no matter what is running or going on, so I can automate shutdowns from the host machine. But I want it to be as graceful as possible, rather than just pulling the plug. Some problems: If a user is logged in, ACPI shutdown causes a box to appear that says, "are you sure you want to shutdown while other users are logged in"? And this prevents shutdown until someone connects to the machine and clicks "yes". In this case, it should try its best to gracefully log out all users, using force if necessary, and then shutdown without promoting. Busy or non-responding programs or programs asking to save data can prevent Windows from shutting down until a user answers a prompt. This should attempt to save data, wait maybe 30 seconds for non-responding programs, but should get aggressive with stubborn programs. "nope, time's up! 3,2,1, Goodbye!" Is there a registry setting that I can change from: ACPI_Shutdown: "Shut down if Windows feels like it" to ACPI_Shutdown: "Just do it. Kill programs, bump users, try to be graceful about it, but when I come back, I expect you to be off." This should respond to the ACPI shutdown command, and not be a script on windows, unless that script is triggered by the ACPI power button. I'm hoping this can be changed with registry options.

  Read the article

• Sharing disk volumes across OpenVZ guests to reduce Package Management Overhead

  - by andyortlieb

  Is it feasible to create a single "master" OpenVZ guest who would only be used for package management, and use something like mount --bind on several other OpenVZ guests sort of trick them into using the environment installed by the master guest? The point of this would be so that users can maintain their own containers, and yet stay in sync with the master development environment, so they'll always have the latest & greatest requirements without worrying too much about system administration. If they need to install their own packages, could put them in /opt, or /usr/local (or set a path to their home directory)? To rephrase, I would like several (developer's, for example) OpenVZ guests whose /bin, /usr (and so on...) actually refer to the same disk location as that of a master OpenVZ guest who can be started up to install and update common packages for the environment to be shared by all of this group of OpenVZ guests. For what it's worth, we're running Debian 6. Edit: I have tried mounting (bind, and readonly) /bin, /lib, /sbin, /usr in this fashion and it refuses to start the containers stating that files are already mounted or otherwise in use: Starting container ... vzquota : (error) Quota on syscall for id 1102: Device or resource busy vzquota : (error) Possible reasons: vzquota : (error) - Container's root is already mounted vzquota : (error) - there are opened files inside Container's private area vzquota : (error) - your current working directory is inside Container's vzquota : (error) private area vzquota : (error) Currently used file(s): /var/lib/vz/private/1102/sbin /var/lib/vz/private/1102/usr /var/lib/vz/private/1102/lib /var/lib/vz/private/1102/bin vzquota on failed [3] If I unmount these four volumes, and start the guest, and then mount them after the guest has started, the guest never sees them mounted.

  Read the article

• BlazeDS first response is VERY SLOW

  - by chibban

  Hi everyone, I have a very strange an annoying problem: I have an appliaction written in Flex 3, with BlazeDS 3.2 and Java in the backend. I'm actually using a portal (liferay) to display portlets that contain Flex movies. When I hit a refresh button on my page, all the Flex movies send a RemoteObject request to the server (using BlazeDS), which should go to java classes and invoke a method (standard BlazeDS usage I 'm guessing). I'm experiencing VERY slow response (14 minutes) on the first hit, while the following hits are much faster. I've enabled the BlazeDS logging (logging level="All") and I also have debug prints coming from my java classes. I also use the "showBusyCursor" attribute for the RemoteObject - so I can see indication of the request being sent from the flex movie. Here is what I see: I hit the refresh button Each movie invokes a RemoteObject request I see a busy sign - in all the movies I see nothing in the log - no BlazeDS prints and no Java prints Wait 14 minutes or so I see BlazeDS prints followed by Java prints I see data populating my flex movies. The really weird thing is that I have the same "application" installed in 4 different computers (on my laptop and in 3 other unix machines), 3 of these installations work well (good response times) and only 1 has the issue I'm describing. I've tried many things, but everything failed. I'd be really happy to get some advice on this. Thanks

  Read the article

• Managing a test iSCSI target server

  - by dyasny

  Hi all, I am using a RHEL server with a few hard drives, and tgtd as the iscsi target software. I a looking for a way to allocate and deallocate space and targets with that space, without restarting my system, or harming other LUNs. Currently, all my HDDs are PVs in a single VG, and I lvcreate/lvremove as required, and then export the allocated LVs using a tgt script: usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=1 --targetname iqn.2001-04.com.lab.gss:300gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_300Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=2 --targetname iqn.2001-04.com.lab.gss:200gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 2 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_200Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 2 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=3 --targetname iqn.2001-04.com.lab.gss:100gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 3 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_100Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 3 -I ALL tgtadm --mode target --op show So in order to remove a LUN, I stop the tgtd service, lvremove the lv, and remove the entry from the iscsi target script When I add a lun, I run lvcreate, and then add an entry to the script and run it. This is not quite optimal, since restarting the service is a bad idea while other LUNs are busy, so I am looking for a more scalable and safer way. Thanks

  Read the article

• Dropbox failing to update?

  - by Mick

  I have two PC's at home. One XP the other Windows 7-64bit. I have a word document that I edit on either PC - to enable this I have the file stored in a Dropbox folder. This usually works fine - but sometimes I find that the file does not get updated on my windows7 PC. I.e. I edit the file on my Windows XP machine, then go to my Windows 7 PC and see that there is a previous, old, datestamp on the file and sure enough if I open up the file to have a look, I see that the latest edits are not included. If I right-click on the file and select "Browse on Dropbox website" I see that the latest file is correctly there. Surely there must be some option to say please update this file - but can find no such thing. Has something gone wrong? I should point out that my wireless internet connection is a little intermittent - could this have caused some glitch? By the way I do not leave the old file open in word on my Windows-7 PC as I can well imagine that would cause trouble. Also I should mention that the icon on the document has the little green tick on it showing that Dropbox is not in the process of doing a transfer. Also the Dropbox icon in my system tray also has the green tick - so Dropbox is not busy transferring some other file(s). If I hover the mouse over the Dropbox icon I get the tooltip "All files up to date".

  Read the article

• LSI 9260-8i w/ 6 256gb SSDs - RAID 5, 6, 10, or bad idea overall?

  - by Michael Pearson

  We're provisioning a new production server for our reasonably busy website. Our choice of host have available a 6 drive configuration with a LSI 9260-8i card. My initial thought was to fill all six bays with SSDs (Intel 520 256gb) and set them up in RAID. Good, bad, or terrible idea? Can the card handle it? Should we be using RAID 5, 6 or 10? This would be the first time the provider have filled all six slots for this rackmount with SSDs, so they're a bit hesitant. I'm wondering if somebody else with this card has done something similar in a production environment. We do about 43gb of writes per day and currently use about 300gb of storage. The server acts as webserver, database, and image store for approx 1 million files. The plan is to underprovision the SSDs by approximately 10% to 20% to increase their overall lifespan & performance. The fallback option is 2x480gb SSDs in RAID 1 and another 2x1TB HDDs in RAID 1. The motivation behind this is that the server rental cost difference between 2xSSDs and 6xSSDs is minimal (compared to the overall cost of the rental). We do not have any special high-IOPs requirements. However, if the configuration is known to work, I don't see a good reason to not use it and not have to worry about having separate 'fast and small' and 'slow and large' disks.

  Read the article

• How can I regain control over a "stuck" scroll bar?

  - by jonsca

  I normally have a lot of tabs open in the browser at one time, which normally doesn't cause any problems. Occasionally, though, the page will have fully rendered, the scroll bar is at the top of its track on the right, but placing the the mouse pointer on the scroll bar does not allow me to get control of it (and using the arrow at the bottom of the scroll bar doesn't work either). This seems to happen to me in both Firefox and Chrome, both latest versions. There is normally no load on the CPU, and while my memory usage can be high (especially with Chrome), I still usually have 25% left. I fear that this is one of those "for your own good" features, to prevent scrolling down a page that may still have elements loading and/or a stuck script, but I'm wondering whether or not there is a setting in Firefox or Chrome (or perhaps Windows in general) that will allow the scroll bar to be "released" even though the browser may be busy? It may be "2002" of me, but I wouldn't mind being able to scroll along gradually, even if the page hasn't had time to fully render all of the images, etc., yet. Does such an advanced setting exist "under the hood"?

  Read the article

• Sun-JRE on CentOS-4.8 RPM error: post-install scriptlet failed, exit status 5

  - by Emyr

  I have a server with CentOS 4.8 installed. The provided is rubbish, but there's only a few months left, and they're busy being sued by Chase bank, so I doubt I can get CentOS 5. I wiped the server clean using Virtuozzo, and found that the default image is VERY empty. I even had to install yum myself. I've reached the point where I want to install TomCat. I downloaded the Sun JRE as a .rpm.bin file, did chmod a+x and ran it. That produced a .rpm file, which I tried installing: [root@host java]# rpm -Uvh jre-6u20-linux-i586.rpm Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... jsse.jar... charsets.jar... localedata.jar... plugin.jar... javaws.jar... deploy.jar... error: %post(jre-1.6.0_20-fcs.i586) scriptlet failed, exit status 5 [root@host java]# rpm -qi jre Name : jre Relocations: /usr/java Version : 1.6.0_20 Vendor: Sun Microsystems, Inc. Release : fcs Build Date: Mon Apr 12 19:34:13 2010 Install Date: Thu May 6 06:36:17 2010 Build Host: jdk-lin-1586 Group : Development/Tools Source RPM: jre-1.6.0_20-fcs.src.rpm Size : 50708634 License: Sun Microsystems Binary Code License (BCL) Signature : (none) Packager : Java Software <[email protected]> URL : http://java.sun.com/ Summary : Java(TM) Platform Standard Edition Runtime Environment Description : The Java Platform Standard Edition Runtime Environment (JRE) contains everything necessary to run applets and applications designed for the Java platform. This includes the Java virtual machine, plus the Java platform classes and supporting files. The JRE is freely redistributable, per the terms of the included license. [root@host java]# I couldn't find any results on Google for any parts of that error message, and I have very little experience of rpm (I usually use Debian). Is this a broken package, or am I missing something or some setting?

  Read the article

• Have local admin privileges on Windows XP, but getting "Error terminating process: Access is denied"

  - by Chris W. Rea

  On one of the Windows XP machines I use regularly, there is a process that starts up periodically. I'd like to be able to kill the process – sometimes – because it occasionally runs when I'm busy doing something machine-intensive. I've already tried dropping the process priority to "Idle" to mitigate the effects, but it isn't the CPU that's the problem. Rather, the process is very disk-intensive and no matter the process priority, it still causes significant disk thrashing when running, impacting everything else I'm doing at the time. Using Process Explorer, I can find the process, right-click, and choose Kill Process, but I always get the message "Error terminating process: Access is denied." This is not an operating system process, but third-party software. What might that process be doing to prevent itself from being terminated? How can I kill such a process? Is there a way for me to modify the process's security or access control list (ACL) somewhere, using Process Explorer or another tool, so that I can effectively kill it?

  Read the article

• Why I am getting "Problem loading the page" after enabling HTTPS for Apache on Windows 7?

  - by Anish

  I enabled HTTPS on the Apache server (2.2.15) Windows 7 Enterprise by uncommenting: Include /private/etc/apache2/extra/httpd-ssl.conf in C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd.conf and modifying C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd-ssl.conf to include: DocumentRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs" ServerName myserver.com:443 ServerAdmin [email protected] ... SSLCertificateFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem SSLCertificateKeyFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/key.pem" Then I restart apache (going to start-All Progranms-Apache Server 2.2-Control-restart) and go to localhost on port 443 in Firefox , where I get: Index of / Index of / Links/ ..... .... But on Display of WebPage I see: Unable to connect Firefox can't establish a connection to the server at localhost. *The site could be temporarily unavailable or too busy. Try again in a few moments. *If you are unable to load any pages, check your computer's network onnection. *If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. I read: Why am I getting 403 Forbidden after enabling HTTPS for Apache on Mac OS X? and added default web server configuration block to match my DocumentRoot The error Log C:\Program Files (x86)\Apache Software Foundation\Apache2.2\logs\error.log gives following error: The Apache2.2 service is running. (OS 5)Access is denied. : Init: Can't open server certificate file C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem I checked the permissions for cert.pem and it indicates: All the permissions (Full control, Read, Read and modify, execute, Write) are marked for Admin and I am currently logged in as Admin. I tried using oldcert.pem and oldkey.pem on the same server and it works fine. Is there anything that I missed?

  Read the article

• Hourly SQL Server 2005 Slowness (Possibly caused by SYSTEM)

  - by Zorlack

  We're trying to diagnose the cause of slowness on our Database server. We're running the latest rev SQL Server 2005 on Windows 2008x64. The behavior that we're seeing is this: We see the SYSTEM process spike one of the CPUs for about 2 minutes, during this time SQL server slows down by a factor of 10. The slowness lasts until SYSTEM is done, then in an hour everything starts again. During these slowdowns disk writes don't spike, paging doesn't spike, the only noticeable precursor we see is that SYSTEM maxes out one of the sixteen (HT)CPUs. Note that this doesn't happen at the top of the hour, it just happens once an hour, and it shifts a bit depending on the length of the incident. At the moment this is causing intermittent slowdowns, but when the server is really busy it can cause Worker Thread starvation. The server is a Dual Quad Dell R710 with 96GB of RAM and RAID10 data/log disks. Has anyone experienced this kind of problem? Does anyone know where we should look?

  Read the article

• Win XP error 0x80041003 using GetObject/winmgmts

  - by John Lewis

  My computer is called "neil" and I want to set some values using WMI in vbScript. I adapetd the script below from one supplied by Microsoft. When I run it in my browser I get Error Type: (0x80041003) /dressage/30/pdf2.asp, line 8 I suspect it is some registry/security setting. Any advice? John Lewis FULL SCRIPT call Print_HTML_Page("http://neil/dressage/ascii.asp", "ascii") Sub SetPDFFile(strPDFFile) Const HKEY_LOCAL_MACHINE = &H80000002 strKeyPath = "SOFTWARE\Dane Prairie Systems\Win2PDF" strComputer = "." Set objReg=GetObject( _ "winmgmts:{impersonationLevel=impersonate}!\\" & _ strComputer & "\root\default:StdRegProv") strValueName = "PDFFileName" objReg.SetExpandedStringValue HKEY_LOCAL_MACHINE,_ strKeyPath,strValueName,strPDFFile End Sub Sub Print_HTML_Page(strPathToPage, strPDFFile) SetPDFFile( strPDFFile ) Set objIE = CreateObject("InternetExplorer.Application") 'From http://www.tek-tips.com/viewthread.cfm?qid=1092473&page=5 On Error Resume Next strPrintStatus = objIE.QueryStatusWB(6) If Err.Number 0 Then MsgBox "Cannot find a printer. Operation aborted." objIE.Quit Set objIE = Nothing Exit Sub End If With objIE .visible=0 .left=200 .top=200 .height=400 .width=400 .menubar=0 .toolbar=1 .statusBar=0 .navigate strPathToPage End With 'Wait until IE has finished loading Do while objIE.busy WScript.Sleep 100 Loop On Error Goto 0 objIE.ExecWB 6,2 'Wait until IE has finished printing WScript.Sleep 2000 objIE.Quit Set objIE = Nothing End Sub

  Read the article

• asterisk extensions.conf & sip.conf

  - by Josh

  I'm trying to get my Dialplan to work. When I call, the only thing I get is a dial tone to enter extension "no Background(thanks-calling) is played". When extension 123 is dialed, busy signal is triggered and asterisk CLI get frozen. Any help will be appreciate it. Conf files below. ; PSTN on sip.conf [pstn] type=friend host=dynamic context=pstn username=pstn secret=password nat=yes canreinvite=no dtmfmode=rfc2833 qualify=yes insecure=port,invite disallow=all allow=ulaw ; PSTN on extensions.conf [pstn] exten => s,1,Answer exten => s,2,Wait,2 exten => s,4,DigitTimeout,5 exten => s,5,ResponseTimeout,10 exten => s,6,Background(thanks-calling) exten => 0,1,Goto(incoming,123,1) ; (Member Services) [incoming] exten => 123,1,NoOP(${CALLERID}) ; show the caller ID info in the console exten => 123,n,Ringing() exten => 123,n,Answer() exten => 123,n,Playback(silence/1) exten => 123,n,Playback(connecting1) exten => 123,n,Wait(3) exten => 123,n,Dial(SIP/line1,60) exten => 123,n,Congestion

  Read the article

• CentOS networking BNX2

  - by james moore

  Having some trouble with my NICs. The server starts fine and I can wget/ping etc. However, when I /etc/init.d/networking restart I then receive the following error: Bringing up interface eth0: bnx2: fw sync timeout, reset code = 1030009 SIOCSIFFLAGS: Device or resource busy Consequently, the task fails. I have searched around on google users suggesting to disable PNP in the BIOS but I see no option. Here is some system information: $ ethtool -i eth0 driver: bnx2 version: 2.0.8-rh firmware-version: bc 2.9.1 $ uname -a Linux host 2.6.18-238.9.1.el5 #1 SMP Tue Apr 12 18:10:13 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux $/sbin/lspci | grep Broadcom 04:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) 08:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) $ lsmod | grep bnx2 bnx2i 81704 0 cnic 109512 1 bnx2i libiscsi2 77765 6 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi_tcp scsi_transport_iscsi2 73945 8 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2 bnx2 224780 0 scsi_mod 199001 15 mpt2sas,scsi_transport_sas,mptctl,be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2,scsi_transport_iscsi2,scsi_dh,sg,libata,megaraid_sas,sd_mod $ rmmod bnx2; modprobe bnx2 PCI: Enabling device 0000:05:00.0 (0158 -> 015a) PCI: Enabling device 0000:09:00.0 (0158 -> 015a) bnx2: fw sync timeout, reset code = 10300003 Any help would be appreciated as I am at a loss.

  Read the article

• ESX Scheduler and NUMA issue

  - by babyg_wc

  On our 24 core bl685 (4sockets x 6core), we find that NUMA nodes 0 and 1 are pretty busy (unfortunately resulting in elevated cpu ready times on the VMS), whilst NUMA nodes 2 and 3 are almost unused. I thought this just maybe a ESX4 U1 issue, so I had a colleague with a 32 core (dl785) farm investigate, and it seems that his last 3 or 4 NUMA nodes are also not really being utilised. ESX seems to have a weakness when it comes to balancing lightly loaded NUMA boxes, Im going to enabled node interleaving in the BIOS and see if the scheduler balancers across all 24 cores, instead of just 12!... For those of you with large core counts, I would suggest you fire up you viclient, and check Physical CPU useage (or esxtop), I would be interested to hear what your results are. Please note, that its only the lightly loaded (eg less than 30% cpu load on the esx host) that seems to have the biggest issue with load imbalance. Thoughts/comments. PS ive logged a SR with vmware to assist, also the other "problem" could be that we have 128gb of ram in each host, and therefore the scheduler sees no good reason why it shouldnt try and cram all vms's into the first two NUMA nodes, as we only have around 50gb of ram worth of vms on each host...

  Read the article

• CentOS - mdadm raid1 drive won't mount to default location

  - by danny

  I'm running CentOS 5.5, the system, boot, swap, etc. is all on /dev/sda and I have two identical single-partition drives /dev/sdb1 /dev/sdc1 that are configured in RAID1 (using mdadm). It was working fine (configured to mount to /mnt/data in the fstab file) and I recently let yum install a couple of automatic updates without paying attention to what they were, and now it doesn't work. Raid is working fine (dmesg shows it gets loaded correctly). mdstat shows: # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[1] sdb1[0] XXXX blocks [2/2] [UU] unused devices: <none> Additionally, I can mount it anywhere other than its default directory (i.e. the following works, and I can read data off the drives). # mount /dev/md0 /mnt/data2 EXT3-fs warning: mounting fs with errors, running e2fsck is recommended But when I run the following I get: # mount -a mount: /dev/sdb1 already mounted or /mnt/data busy It says nothing is mounted when I try to umount /dev/sdb1 or umount /mnt/data, so I assume it's the second of those errors. However, lsof | grep mnt shows nothing. The weird thing is that I can save files in /mnt/data. So something is obviously mounted there, but when I try to umount it I get the error that nothing is mounted. /etc/mtab doesn't mention any of the partitions or files I am trying to work with, and fstab just has that one line I mentioned above that is supposed to mount my raid partition. Again, it was all working fine until I On Google I've found a few things about dmraid interfering with mdadm after an update, but I yum remove'd dmraid and rebooted and it didn't help. I'm really confused and need to get this working to get on with my work!

  Read the article

• WSS Search fills 10 GB limit on SBS server 2011

  - by Kactus

  I've got a SBS Server 2011 Standard SP1 that isn't very busy. 2 Users local and 2 remote. We have sharepoint that has maybe a dozen small documents at most. I've just started getting the following two error occur Could not allocate space for object 'dbo.MSSBatchHistory'.'IX_MSSBatchHistory' in database 'WSS_Search_SERVER' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. And CREATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 10240 MB per database. Digging around in SQL manager I see that WSS Search DB file size is 10241MB, the log file is only 147 MB Firstly, why is WSS Search taking up so much space? How can I stop it from doing so, and what can I do now to get things running ok. I know about log file truncating and this isn't the case here since the log is tiny. Any help is appreciated. There is plenty of free space on the disk (791GB free) Thanks Kactus

  Read the article

• Apache MaxClients doubt

  - by Milan Babuškov

  I have a busy Apache server serving only dynamic PHP+MySQL pages. It is a prefork Apache, version 2.2.4 with following config: KeepAlive off StartServers 8 MinSpareServers 32 MaxSpareServers 64 ServerLimit 512 MaxClients 512 MaxRequestsPerChild 4000 MaxClients/ServerLimit used to be set to 256, but I got the following error in error_log so I increased it: [error] server reached MaxClients setting, consider raising the MaxClients setting It seems to work now, but I have a doubt. Looking at MySQL log of queries, I have a couple hundred clients per seconds, but "ps ax" only shows 8, 9 or 10 processes running: [root@engine ~]# ps ax | grep http | wc -l 10 I even got this many processes when the above error message was shown in error_log. This made me investigate further. When I run netstat -a, I get something like this: tcp 0 0 engine:http adsl-105-143.teol.net:21453 TIME_WAIT tcp 0 0 engine:http 118-36.static.kds:mck-ivpip TIME_WAIT tcp 0 0 engine:http 118-36.static:oce-snmp-trap TIME_WAIT tcp 0 0 engine:http 118-36.static.kd:unifyadmin TIME_WAIT tcp 0 0 engine:http cable-188-2-25-29.dyna:4906 TIME_WAIT tcp 0 0 engine:http adsl-105-143.teol.net:21458 TIME_WAIT tcp 0 0 engine:http 109-92-83-91.dynamic.:62821 TIME_WAIT tcp 0 0 engine:http cable-89-216-142-192.:63576 TIME_WAIT tcp 0 0 engine:http 109-92-83-91.dynamic.:62819 TIME_WAIT tcp 1081 0 engine:http pttnetadsl38-36.ptt.r:50496 ESTABLISHED tcp 0 0 engine:http cable-188-2-36-196.dyn:4136 TIME_WAIT tcp 0 0 engine:http cable-89-216-142-192.:63580 TIME_WAIT tcp 0 0 engine:http cable-89-216-142-192.:63581 TIME_WAIT etc. When counting those, I get: [root@engine ~]# netstat -a | grep http | wc -l 431 Can anyone tell me what is really going on here and how to make sure my server keeps working, because I only use 50% of available RAM in machine?

  Read the article

• How to forceably unmount stuck network share in Mac OS X?

  - by Kyle Lowry

  Not long ago my Xserve failed (power loss) while an iMac was working with files on a particular network share (called "Work Share"). This volume, "Work Share", is now stuck. It can't be seen in the GUI, you can only detect it using the Terminal. Even after power cycling over the course of several days, ls -a still shows that it's there, but I can't unmount it using any command - not even as root in single user mode. Every time I attempt to unmount that volume, I get the message that the resource is busy (which it can't possibly be since nothing is using it), and error code 4915. The issue is that when I mount the real "Work Share", it internally is renamed to "Work Share-1", which breaks all my links, and several files in the share. If I can't unmount the false "Work Share", then that computer would be unuseable without a reformat, I would imagine - and I don't want it to have to come to that. I've tried everything I can think of - it looks like sudo can't save me now. Any ideas on how to unmount this stuck volume?

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >