Search Results

Search found 2366 results on 95 pages for 'cat mitch'.

Page 34/95 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• WordPress: Using a Where Clause With A Custom Field

  - by Steve Wilkison

  I have a bunch of events that are listed on a particular page. Each event is a post. I need them to display in the order in which they occur, NOT the order of the posting date. So, I've created a custom field called TheDate and enter in the date in this format for each one: 20110306. Then, I wrote my query like this: query_posts( array ( 'cat' => '4', 'posts_per_page' => -1, 'orderby' => 'meta_value_num', 'meta_key' => 'TheDate', 'order' => 'ASC' ) ); Works perfectly and displays the events in the correct order. However, I also want it to ONLY display dates from today onward. I don't want it to display dates which have passed. It seems the way to do this is with a "filter." I tried this, but it doesn't work. $todaysdate = date('Ymd'); query_posts( array ( 'cat' => '4', 'posts_per_page' => -1, 'orderby' => 'meta_value_num', 'meta_key' => 'TheDate', 'order' => 'ASC' ) ); function filter_where( $where = '' ) { $where .= "meta_value_num >= $todaysdate"; return $where; } add_filter( 'posts_where', 'filter_where' ); I figure it's just a matter of where I'm using this filter, I probably have it in the wrong place. Or maybe the filter itself is bad. Any help or guidance would be greatly appreciated. Thanks!

  Read the article

• codeigniter mulitple LIKE db query using associative array- but all from the same column name...?

  - by Inigo

  Hi, I'm trying to query my database using codeigniter's active record class. I have a number of blog posts stored in a table. The query is for a search function, which will pull out all the posts that have certain categories assigned to them. So the 'category' column of the table will have a list of all the categories for that post in no particular order, separated by commas, like so: Politics,History,Sociology.. etc. If a user selects, say, Politics and History, The titles of all the posts that have BOTH these categories should be returned. Right? So, the list of categories queried will be the array $cats. I thought this would work- foreach ($cats as $cat){ $this->db->like('categories',$cat); } By Producing this- $this-db-like('categories','Politics'); $this-db-like('categories','History'); (Which would produce- 'WHERE categories LIKE '%Politics%' AND categories LIKE '%History%') But it doesn't work, it seems to only produce the first statement. The problem I guess is that the column name is the same for each of the chained queries. There doesn't seem to be anything in the CI user guide about this (http://codeigniter.com/user_guide/database/active_record.html) as they seem to assume that each chained statement is going to be for a different column name. Does anyone know how I could do this? Thanks! edit- Of course it is not possible to use an associative array in one statement as it would have to contain duplicate keys- in this case every key would have to be 'categories'...

  Read the article

• Unicode version of base64 encoding/ decoding

  - by Yan Cheng CHEOK

  I am using base64 encoding/decoding from http://www.adp-gmbh.ch/cpp/common/base64.html It works pretty well with the following code. const std::string s = "I Am A Big Fat Cat" ; std::string encoded = base64_encode(reinterpret_cast<const unsigned char*>(s.c_str()), s.length()); std::string decoded = base64_decode(encoded); std::cout << _T("encoded: ") << encoded << std::endl; std::cout << _T("decoded: ") << decoded << std::endl; However, when comes to unicode namespace std { #ifdef _UNICODE typedef wstring tstring; #else typedef string tstring; #endif } const std::tstring s = _T("I Am A Big Fat Cat"); How can I still make use of the above function? Merely changing std::string base64_encode(unsigned TCHAR const* , unsigned int len); std::tstring base64_decode(std::string const& s); will not work correctly. (I expect base64_encode to return ASCII. Hence, std::string should be used instead of std::tstring)

  Read the article

• Vectorize matrix operation in R

  - by Fernando

  I have a R x C matrix filled to the k-th row and empty below this row. What i need to do is to fill the remaining rows. In order to do this, i have a function that takes 2 entire rows as arguments, do some calculations and output 2 fresh rows (these outputs will fill the matrix). I have a list of all 'pairs' of rows to be processed, but my for loop is not helping performance: # M is the matrix # nrow(M) and k are even, so nLeft is even M = matrix(1:48, ncol = 3) # half to fill k = nrow(M)/2 # simulate empty rows to be filled M[-(1:k), ] = 0 cat('before fill') print(M) # number of empty rows to fill nLeft = nrow(M) - k nextRow = k + 1 # list of rows to process (could be any order of non-empty rows) idxList = matrix(1:k, ncol = 2) for ( i in 1 : (nLeft / 2)) { row1 = M[idxList[i, 1],] row2 = M[idxList[i, 2],] # the two columns in 'results' will become 2 rows in M # fake result, return 2*row1 and 3*row2 results = matrix(c(2*row1, 3*row2), ncol = 2) # fill the matrix M[nextRow, ] = results[, 1] nextRow = nextRow + 1 M[nextRow, ] = results[, 2] nextRow = nextRow + 1 } cat('after fill') print(M) I tried to vectorize this, but failed... appreciate any help on improving this code, thanks!

  Read the article

• simplexml object node iteration

  - by MorbidWrath

  I have an xml file that I'm parsing with php's simplexml, but I'm having an issue with an iteration through nodes. the xml: <channel> <item> <title>Title1</title> <category>Cat1</category> </item> <item> <title>Title2</title> <category>Cat1</category> </item> <item> <title>Title3</title> <category>Cat2</category> </item> </channel> my counting function: public function cat_count($cat){ $count = 0; $items = $this->xml->channel->item; $size = count($size); for($i=0;$i<$size;$i++){ if($items[$i]->category == $cat){ $count++; } } return $count; } Am I overlooking an error in my code, or is there another preferred method for iterating through the nodes? I've also used a foreach and while statement with no luck, so I'm at a loss. Any suggestions?

  Read the article

• How to read/write from erlang to a named pipe ?

  - by cstar

  I need my erlang application to read and write through a named pipe. Opening the named pipe as a file will fail with eisdir. I wrote the following module, but it is fragile and feels wrong in many ways. Also it fails on reading after a while. Is there a way to make it more ... elegant ? -module(port_forwarder). -export([start/2, forwarder/2]). -include("logger.hrl"). start(From, To)-> spawn(fun() -> forwarder(From, To) end). forwarder(FromFile, ToFile) -> To = open_port({spawn,"/bin/cat > " ++ ToFifo}, [binary, out, eof,{packet, 4}]), From = open_port({spawn,"/bin/cat " ++ FromFifo}, [binary, in, eof, {packet, 4}]), forwarder(From, To, nil). forwarder(From, To, Pid) -> receive {Manager, {command, Bin}} -> ?ERROR("Sending : ~p", [Bin]), To ! {self(), {command, Bin}}, forwarder(From, To, Manager); {From ,{data,Data}} -> Pid ! {self(), {data, Data}}, forwarder(From, To, Pid); E -> ?ERROR("Quitting, first message not understood : ~p", [E]) end. As you may have noticed, it's mimicking the port format in what it accepts or returns. I want it to replace a C code that will be reading the other ends of the pipes and being launched from the debugger.

  Read the article

• Why aren't Java's generics implicitly polymorphic?

  - by froadie

  I'm a bit confused about how Java generics handle inheritance / polymorphism. Assume the following hierarchy - Animal (Parent) Dog - Cat (Children) So suppose I have a method doSomething(List<Animal> animals). By all the rules of inheritance and polymorphism, I would assume that a List<Dog> is a List<Animal> and a List<Cat> is a List<Animal> - and so either one could be passed to this method. Not so. If I want to achieve this behavior, I have to explicitly tell the method to accept a list of any subset of Animal by saying doSomething(List<? extends Animal> animals). I understand that this is Java's behavior. My question is why? Why is polymorphism generally implicit, but when it comes to generics it must be specified?

  Read the article

• Array of Sentences?

  - by user1869915

  Javascript noob here.... I am trying to build a site that will help my kids read predefined sentences from a select group, then when a button is clicked it will display one of the sentences. Is an array the best option for this? For example, I have this array (below) and on the click of a button I would like one of these sentences to appear on the page. <script type="text/javascript"> Sentence = new Array() Sentence[0]='Can we go to the park.'; Sentence[1]='Where is the orange cat? Said the big black dog.'; Sentence[2]='We can make the bird fly away if we jump on something.' Sentence[3]='We can go down to the store with the dog. It is not too far away.' Sentence[4]='My big yellow cat ate the little black bird.' Sentence[5]='I like to read my book at school.' Sentence[6]='We are going to swim at the park.' </script> Again, is an array the best for this and how could I get the sentence to display? Ideally I would want the button to randomly select one of these sentences but just displaying one of them for now would help. Thanks

  Read the article

• jquery problem with toggle event only fireing on the 2nd click...

  - by Ronedog

  Can anyone explain why the following jquery only fires the 2nd toggle event and how to fix it? Specifically, every time I click the nested < a element it brings up the alert "2nd click". I tested the selector to make sure it was selecting the element properly and it does, or at least it inserted a class without any problems. The selector is selecting the very last node in the unordered list that has an anchor tag. $("#nav li:not(:has(li)) a").toggle(function() { //1st click alert("1st Click"); }, function() { //2nd click alert("2nd Click"); }); Nested HTML structure that fails: <ul id="nav"> <li> <span>stuff</span> <a href="#">Cat 1</a> <ul> <li> <span>stuff</span> <a href="#">Subcat1</a> <ul> <li> <span>Stuff</span> <a href="#">Subcat Details</a> </li> </ul> </li> </ul> </li> </ul> However, this works right and fires both click events: <ul id="nav"> <li> <span>stuff</span> <a href="#">Cat 1</a> </li> </ul>

  Read the article

• Ubuntu 10.04 & IBM DS3524 with FC multipath, inactive path is [failed][faulty] instead of [active][ghost]

  - by Graeme Donaldson

  OK, this is my setup: FC Switches IBM/Brocade, Switch1 and Switch2, independent fabrics. Server IBM x3650 M2, 2x QLogic QLE2460, 1 connected to each FC Switch. Storage IBM DS3524, 2x controllers with 4x FC ports each, but only 2x connected on each. +-----------------------------------------------------------------------+ | HBA1 Server HBA2 | +-----------------------------------------------------------------------+ | | | | | | +-----------------------------+ +------------------------------+ | Switch1 | | Switch2 | +-----------------------------+ +------------------------------+ | | | | | | | | | | | | | | | | | | | | +-----------------------------------+-----------------------------------+ | Contr A, port 3 | Contr A, port 4 | Contr B, port 3 | Contr B, port 4 | +-----------------------------------+-----------------------------------+ | Storage | +-----------------------------------------------------------------------+ My /etc/multipath.conf is from the IBM redbook for the DS3500, except I use a different setting for prio_callout, IBM uses /sbin/mpath_prio_tpc, but according to http://changelogs.ubuntu.com/changelogs/pool/main/m/multipath-tools/multipath-tools_0.4.8-7ubuntu2/changelog, this was renamed to /sbin/mpath_prio_rdac, which I'm using. devices { device { #ds3500 vendor "IBM" product "1746 FAStT" hardware_handler "1 rdac" path_checker rdac failback 0 path_grouping_policy multibus prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } multipaths { multipath { wwid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alias array07 path_grouping_policy multibus path_checker readsector0 path_selector "round-robin 0" failback "5" rr_weight priorities no_path_retry "5" } } The output of multipath -ll with controller A as the preferred path: root@db06:~# multipath -ll sdg: checker msg is "directio checker reports path is down" sdh: checker msg is "directio checker reports path is down" array07 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) dm-2 IBM ,1746 FASt [size=4.9T][features=1 queue_if_no_path][hwhandler=0] \_ round-robin 0 [prio=2][active] \_ 5:0:1:0 sdd 8:48 [active][ready] \_ 5:0:2:0 sde 8:64 [active][ready] \_ 6:0:1:0 sdg 8:96 [failed][faulty] \_ 6:0:2:0 sdh 8:112 [failed][faulty] If I change the preferred path using IBM DS Storage Manager to Controller B, the output swaps accordingly: root@db06:~# multipath -ll sdd: checker msg is "directio checker reports path is down" sde: checker msg is "directio checker reports path is down" array07 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) dm-2 IBM ,1746 FASt [size=4.9T][features=1 queue_if_no_path][hwhandler=0] \_ round-robin 0 [prio=2][active] \_ 5:0:1:0 sdd 8:48 [failed][faulty] \_ 5:0:2:0 sde 8:64 [failed][faulty] \_ 6:0:1:0 sdg 8:96 [active][ready] \_ 6:0:2:0 sdh 8:112 [active][ready] According to IBM, the inactive path should be "[active][ghost]", not "[failed][faulty]". Despite this, I don't seem to have any I/O issues, but my syslog is being spammed with this every 5 seconds: Jun 1 15:30:09 db06 multipathd: sdg: directio checker reports path is down Jun 1 15:30:09 db06 kernel: [ 2350.282065] sd 6:0:2:0: [sdh] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 1 15:30:09 db06 kernel: [ 2350.282071] sd 6:0:2:0: [sdh] Sense Key : Illegal Request [current] Jun 1 15:30:09 db06 kernel: [ 2350.282076] sd 6:0:2:0: [sdh] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 Jun 1 15:30:09 db06 kernel: [ 2350.282083] sd 6:0:2:0: [sdh] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 1 15:30:09 db06 kernel: [ 2350.282092] end_request: I/O error, dev sdh, sector 0 Jun 1 15:30:10 db06 multipathd: sdh: directio checker reports path is down Jun 1 15:30:14 db06 kernel: [ 2355.312270] sd 6:0:1:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 1 15:30:14 db06 kernel: [ 2355.312277] sd 6:0:1:0: [sdg] Sense Key : Illegal Request [current] Jun 1 15:30:14 db06 kernel: [ 2355.312282] sd 6:0:1:0: [sdg] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 Jun 1 15:30:14 db06 kernel: [ 2355.312290] sd 6:0:1:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 1 15:30:14 db06 kernel: [ 2355.312299] end_request: I/O error, dev sdg, sector 0 Does anyone know how I can get the inactive path to show "[active][ghost]" instead of "[failed][faulty]"? I assume that once I can get that right then the spam in my syslog will end as well. One final thing worth mentioning is that the IBM redbook doc targets SLES 11 so I'm assuming there's something a little different under Ubuntu that I just haven't figured out yet. Update: As suggested by Mitch, I've tried removing /etc/multipath.conf, and now the output of multipath -ll looks like this: root@db06:~# multipath -ll sdg: checker msg is "directio checker reports path is down" sdh: checker msg is "directio checker reports path is down" xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxdm-1 IBM ,1746 FASt [size=4.9T][features=0][hwhandler=0] \_ round-robin 0 [prio=1][active] \_ 5:0:2:0 sde 8:64 [active][ready] \_ round-robin 0 [prio=1][enabled] \_ 5:0:1:0 sdd 8:48 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 6:0:1:0 sdg 8:96 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 6:0:2:0 sdh 8:112 [failed][faulty] So its more or less the same, with the same message in the syslog every 5 minutes as before, but the grouping has changed.

  Read the article

• Magento - Add CMS Block to One Page

  - by a1anm

  I have this code in a xml layout file: <reference name="left"> <block type="blog/blog" name="left.blog.menu" before="-"> <action method="setTemplate" ifconfig="blog/menu/left"> <template>aw_blog/menu.phtml</template> </action> <block type="blog/tags" name="blog_tags" /> </block> </reference> I want to add a cms static block to the blog pages using this code: <block type="cms/block" name="brand_list"> <action method="setBlockId"><block_id>brand_list</block_id></action> </block> If I add it in directly after this line: <reference name="left"> It works but it is then displayed on every page. How can I get it to show only on the blog pages? Thanks. Edit: Here is the entire xml file: <layout version="0.1.0"> <default> <reference name="footer_links"> <block type="blog/blog" name="add.blog.footer"> <block type="blog/tags" name="blog_tags" /> <action method="addFooterLink" ifconfig="blog/menu/footer"></action> </block> </reference> <reference name="right"> <block type="blog/blog" name="right.blog.menu" before="-"> <action method="setTemplate" ifconfig="blog/menu/right" ifvalue="1"> <template>aw_blog/menu.phtml</template> </action> <block type="blog/tags" name="blog_tags" /> </block> </reference> <reference name="left"> <block type="blog/blog" name="left.blog.menu" before="-"> <action method="setTemplate" ifconfig="blog/menu/left"> <template>aw_blog/menu.phtml</template> </action> <block type="blog/tags" name="blog_tags" /> </block> </reference> <reference name="top.links"> <block type="blog/blog" name="add.blog.link"> <action method="addTopLink" ifconfig="blog/menu/top"></action> <block type="blog/tags" name="blog_tags" /> </block> </reference> <reference name="head"> <action method="addItem"><type>skin_css</type><name>aw_blog/css/style.css</name></action> </reference> </default> <blog_index_index> <reference name="content"> <block type="blog/blog" name="blog" template="aw_blog/blog.phtml"/> </reference> </blog_index_index> <blog_index_list> <reference name="content"> <block type="blog/blog" name="blog" template="aw_blog/blog.phtml"/> </reference> </blog_index_list> <blog_post_view> <reference name="content"> <block type="blog/post" name="post" template="aw_blog/post.phtml"> <block type="socialbookmarking/bookmarks" name="bookmarks" template="bookmarks/bookmarks.phtml"/> </block> </reference> </blog_post_view> <blog_cat_view> <reference name="content"> <block type="blog/cat" name="cat" template="aw_blog/cat.phtml" /> </reference> </blog_cat_view> <blog_rss_index> <block type="blog/rss" output="toHtml" name="rss.blog.new"/> </blog_rss_index> </layout>

  Read the article

• A lot of TCP: time wait bucket table overflow in CentOS 6

  - by divaka

  we have the following output from dmesg: __ratelimit: 33491 callbacks suppressed TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow Also we have the following setting: cat /proc/sys/net/ipv4/tcp_max_tw_buckets 524288 We are under some kind of attack, but we could not detect what cause this problem?

  Read the article

• "Attach to native process failed" with Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit

  - by Richard

  In trying to install Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit, the dialogue appears as follows. # export JAVAHOME=/usr/java/jdk1.6.0_24/; echo $JAVAHOME /usr/java/jdk1.6.0_24/ # ./setup Launching installer... Attach to native process failed On the server we have the following JREs and I've tried both. $ sudo rpm -qa | egrep "(openjdk|icedtea)" java-1.6.0-openjdk-1.6.0.0-1.27.1.10.8.el5_8 And SElinux appears to be off: # cat /etc/sysconfig/selinux SELINUX=disabled SELINUXTYPE=targeted

  Read the article

• Ubuntu suddenly freezes

  - by tapan

  I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

  Read the article

• eth0:0 is configured but not listed in ifconfig output

  - by FractalizeR

  Hello. I have the following problem: My server was given two IPs from [b]different[/b] subnets. Now I am trying to configure the system to work properly. I have created [root@server ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) HWADDR=00:30:48:DA:B1:0E DEVICE=eth0 BOOTPROTO=none BROADCAST=79.174.69.255 IPADDR=79.174.69.241 NETMASK=255.255.254.0 NETWORK=79.174.68.0 ONBOOT=yes GATEWAY=79.174.68.1 TYPE=Ethernet [root@server ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0:0 # Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) HWADDR=00:30:48:DA:B1:0E DEVICE=eth0 BOOTPROTO=none BROADCAST=79.174.69.255 IPADDR=79.174.71.74 NETMASK=255.255.255.0 NETWORK=79.174.71.1 ONBOOT=yes GATEWAY=79.174.71.1 TYPE=Ethernet But both after "service network restart" and after "reboot" [root@server ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:30:48:DA:B1:0E inet addr:79.174.71.74 Bcast:79.174.71.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:feda:b10e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:910284 errors:0 dropped:0 overruns:0 frame:0 TX packets:2924 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:257964879 (246.0 MiB) TX bytes:232450 (227.0 KiB) Memory:df220000-df240000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6976 (6.8 KiB) TX bytes:6976 (6.8 KiB) Device eth0:0 is not shown as active. If I try [root@server ~]# ifconfig eth0:0 eth0:0 Link encap:Ethernet HWaddr 00:30:48:DA:B1:0E UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:df220000-df240000 It is shown as up and running, but IP is not assigned to it. Also it is strange, that IP address assigned to eth0:0 in config file is used by eth0. /var/log/messages shows nothing about network configuration errors on either eth0 or eth0:0. system-config-network seem to understand all settings correctly and resaves them ok also. "ifup eth0:0" executes ok, but ifconfig afterwards shows no eth0:0 device after that. What did I do wrong? May be the problem is that IPs are from different subnets?

  Read the article

• Ubuntu/Windows suddenly freezes

  - by tapan

  I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

  Read the article

• SNMP custom script :: OID not increasing

  - by amprantino

  I try to create a custom SNMP oid. I add the following like to snmpd.conf (and restart service) : pass .1.3.6.1.3.2 /bin/myscript.sh cat myscript.sh #!/bin/sh echo .1.3.6.1.3.2 echo gauge exec 100 snmpwalk -c mycommunity -v2c 10.2.1.4 .1.3.6.1.3.2 SNMPv2-SMI::experimental.2 = Gauge32: 100 Error: OID not increasing: SNMPv2-SMI::experimental.2 >= SNMPv2-SMI::experimental.2 Is snmpwalk expecting anything at the end of the query ? snmpget work with no problem! Thank you

  Read the article

• Allow anonymous upload for Vsftpd?

  - by user15318

  I need a basic FTP server on Linux (CentOS 5.5) without any security measure, since the server and the clients are located on a test LAN, not connected to the rest of the network, which itself uses non-routable IP's behind a NAT firewall with no incoming access to FTP. Some people recommend Vsftpd over PureFTPd or ProFTPd. No matter what I try, I can't get it to allow an anonymous user (ie. logging as "ftp" or "anonymous" and typing any string as password) to upload a file: # yum install vsftpd # mkdir /var/ftp/pub/upload # cat vsftpd.conf listen=YES anonymous_enable=YES local_enable=YES write_enable=YES xferlog_file=YES #anonymous users are restricted (chrooted) to anon_root #directory was created by root, hence owned by root.root anon_root=/var/ftp/pub/incoming anon_upload_enable=YES anon_mkdir_write_enable=YES #chroot_local_user=NO #chroot_list_enable=YES #chroot_list_file=/etc/vsftpd.chroot_list chown_uploads=YES When I log on from a client, here's what I get: 500 OOPS: cannot change directory:/var/ftp/pub/incoming I also tried "# chmod 777 /var/ftp/incoming/", but get the same error. Does someone know how to configure Vsftpd with minimum security? Thank you. Edit: SELinux is disabled and here are the file permissions: # cat /etc/sysconfig/selinux SELINUX=disabled SELINUXTYPE=targeted SETLOCALDEFS=0 # sestatus SELinux status: disabled # getenforce Disabled # grep ftp /etc/passwd ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin # ll /var/ drwxr-xr-x 4 root root 4096 Mar 14 10:53 ftp # ll /var/ftp/ drwxrwxrwx 2 ftp ftp 4096 Mar 14 10:53 incoming drwxr-xr-x 3 ftp ftp 4096 Mar 14 11:29 pub Edit: latest vsftpd.conf: listen=YES local_enable=YES write_enable=YES xferlog_file=YES #anonymous users are restricted (chrooted) to anon_root anonymous_enable=YES anon_root=/var/ftp/pub/incoming anon_upload_enable=YES anon_mkdir_write_enable=YES #500 OOPS: bad bool value in config file for: chown_uploads chown_uploads=YES chown_username=ftp Edit: with trailing space removed from "chown_uploads", err 500 is solved, but anonymous still doesn't work: client> ./ftp server Connected to server. 220 (vsFTPd 2.0.5) Name (server:root): ftp 331 Please specify the password. Password: 500 OOPS: cannot change directory:/var/ftp/pub/incoming Login failed. ftp> bye With user "ftp" listed in /etc/passwd with home directory set to "/var/ftp" and access rights to /var/ftp set to "drwxr-xr-x" and /var/ftp/incoming to "drwxrwxrwx"...could it be due to PAM maybe? I don't find any FTP log file in /var/log to investigate. Edit: Here's a working configuration to let ftp/anonymous connect and upload files to /var/ftp: listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES anon_mkdir_write_enable=YES

  Read the article

• cPanel Virtfs won't umount

  - by JPerkSter

  Anyone have any experience with virtfs on cPanel servers? I can't seem to get them to unmount, as they say they are already unmounted: [root@Server ~]# cat /proc/mounts | grep user /dev/root /home/virtfs/user/lib ext3 rw,errors=continue,data=ordered 0 0 /dev/root /home/virtfs/user/opt ext3 rw,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/lib ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/sbin ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/share ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/bin ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/man ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/X11R6 ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/kerberos ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/libexec ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/bin ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/share ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/Zend ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/IonCube ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/include ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/lib ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/spool ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/lib ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/cpanel ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/run ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/log ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda6 /home/virtfs/user/tmp ext3 rw,nosuid,nodev,noexec,noatime,errors=continue,data=ordered 0 0 /dev/root /home/virtfs/user/bin ext3 rw,errors=continue,data=ordered 0 0 [root@Server ~]# for i in cat /proc/mounts |grep virtfs |grep user |awk '{print$2}'; do umount $i; done umount: /home/virtfs/user/lib: not mounted umount: /home/virtfs/user/opt: not mounted umount: /home/virtfs/user/usr/lib: not mounted umount: /home/virtfs/user/usr/sbin: not mounted umount: /home/virtfs/user/usr/share: not mounted umount: /home/virtfs/user/usr/bin: not mounted umount: /home/virtfs/user/usr/man: not mounted umount: /home/virtfs/user/usr/X11R6: not mounted umount: /home/virtfs/user/usr/kerberos: not mounted umount: /home/virtfs/user/usr/libexec: not mounted umount: /home/virtfs/user/usr/local/bin: not mounted umount: /home/virtfs/user/usr/local/share: not mounted umount: /home/virtfs/user/usr/local/Zend: not mounted umount: /home/virtfs/user/usr/local/IonCube: not mounted umount: /home/virtfs/user/usr/include: not mounted umount: /home/virtfs/user/usr/local/lib: not mounted umount: /home/virtfs/user/var/spool: not mounted umount: /home/virtfs/user/var/lib: not mounted umount: /home/virtfs/user/var/cpanel: not mounted umount: /home/virtfs/user/var/run: not mounted umount: /home/virtfs/user/var/log: not mounted umount: /home/virtfs/user/tmp: not mounted umount: /home/virtfs/user/bin: not mounted umount: /home/virtfs/user/dev: not mounted umount: /home/virtfs/user/proc: not mounted

  Read the article

• Confusion on networking service start/stop in Ubuntu

  - by Daniel Ball

  I'm preparing to move and took down two of my servers, leaving only one with some essential services running. What I neglected to consider was that one was the DHCP server(which I realized when somebody contacted me saying they couldn't connect. Whups). So because I only have a few hosts on this small network, I opted to just statically configure them for now. One of these is a new Ubuntu 11.04 server, where I have very little experience. I edited /etc/network/interfaces and /etc/hosts to reflect my changes. I ran $sudo /etc/init.d/networking stop *deconfiguring network interfaces ... So yay. Then I try to start, it gives me the mumbo jumbo about using services (why didn't it do that for the stop?) So instead I run ... $sudo service networking start networking stop/waiting Now, to me that says the status of the service is stopped. But when I ping another computer, I get a successful reply. So is it not actually stopped? More importantly, am I doing something wrong? Edit daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking stop stop: Unknown instance: daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking start networking stop/waiting daniel@FOOBAR:~$ sudo service networking status networking stop/waiting So you can see why I ran /etc/init.d/networking stop instead. For some reason upstart (that is what "services" is, right?) isn't working with stop. cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 FOOBAR 198.3.9.2 FOOBAR #Added entry July 19 2011 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # hostname FOOBAR auto eth0 iface eth0 inet static address 198.3.9.2 netmask 255.255.255.0 network 198.3.9.0 broadcast 198.3.9.255 gateway 198.3.9.15 No I didn't save backups, it was just a minor change so I just commented out the old DHCP setting. Edit I set everything back to original settings and set up a DHCP server. "starting" networking does the same thing. I can only assume this is normal, I just don't know WHY. It can't be anything to do with the configuration files, since they've been restored.

  Read the article

• Error 80073701 when installing Windows 7 Service Pack 1

  - by Wagner Maestrelli

  I tried to install the Windows 7 Service Pack 1 using Windows Update and I got an error (code 80073701 - unknown error). I tried it again, same thing. Rebooted and tried again, same error. Before I tried to install the SP1 I had installed all the previous updates. I have Windows 7 Ultimate 32-bits. Has anyone gone through the same problem? Any ideas of what might be happening? Thanks! UPDATE: I installed the System Update Readiness Tool. Then, I tried to install the SP1 again, but the installation failed again with the same error. As I thought I was running out of options, I downloaded the SP1 package (500+ MB) and tried to install manually. Before that, I reinstalled the SUR Update. Well, the manual installation of the SP1 failed again. Then I learned about the c:\Windows\Logs\CBS\CheckSUR.log file (thanks Patches!). I checked it out. As I installed the SUR Update multiple times, the older logs are kept in the c:\Windows\Logs\CBS\CheckSUR.persist.log file. In the first time the SUR update was installed there was an error, which is said to have been fixed. In the subsequent logs, no errors were detected. The log with the error: ================================= Checking System Update Readiness. Binary Version 6.1.7600.20593 Package Version 7.0 2010-03-19 09:57 Checking Windows Servicing Packages Checking Package Manifests and Catalogs (f) CBS MUM Corrupt 0x800B0100 servicing\Packages\Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.mum servicing\Packages\Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.cat Package manifest cannot be validated by the corresponding catalog (fix) CBS MUM Corrupt CBS File Replaced Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-cab3-x86.cab. (fix) CBS Paired File CBS File also Replaced Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.cat from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-cab3-x86.cab. Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store Summary: Seconds executed: 224 Found 1 errors Fixed 1 errors CBS MUM Corrupt Total count: 1 Fixed: CBS MUM Corrupt. Total count: 1 Fixed: CBS Paired File. Total count: 1 It seems it has something to do with the Brazilian Portuguese Language Pack, which happens to be my native language. Problem is I can't uninstall the language pack since it is my system default language. And I haven't found any place to download it so I could reinstall it manually. Well, any ideas? Thanks!

  Read the article

• fcgi php.ini override

  - by Linux Intel

  I'm using cPanel on centos5 64bit installed. PHP handler is : fcgi cat /usr/local/apache/conf/php.conf output is : LoadModule fcgid_module modules/mod_fcgid.so MaxRequestsPerProcess 500 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php5 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php4 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php3 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php2 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .phtml AddHandler fcgid-script .php5 .php4 .php .php3 .php2 .phtml Apache/2.2.22 , PHP 5.2.17 How can i use custom php.ini for a specific account .?

  Read the article

• Getting more helpful tab completion prompts in bash?

  - by Rory McCann

  Let's say I have a directory with a few files in it like this: $ ls file1 file2 file3 And I want to do some tab completion in bash: $ cat file<tab> file1 file2 file3 I remember seeing someone doing tab completion and the shell bolded the next parts, so in this case, it would bold the 1, 2 and 3 of the filename so it'll look like this: file**1** file**2** file**3** which will tell you what you should type in next. I think this was a feature of zsh, but is there any way to get it in bash?

  Read the article

• xterm not wrapping text properly

  - by mulllhausen

  I'm configuring both my gnome-terminal and xterm columns (i still haven't picked which of these I will be using) and I have a couple of issues I would like to fix: the typing area seems to be smaller (fewer columns) than the display area the typed text is not wrapping to the next line when it reaches the end - it just continues back around on the same line, overwriting the prompt (i have set a custom bash prompt with PS1 in case this is relevant) $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.1 (wheezy) Release: 7.1 Codename: wheezy $ echo $TERM xterm $ stty -a [peter@pc ~] $ stty -a speed 38400 baud; rows 52; columns 126; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke $[peter@mine ~] $ # the column width only goes up to here ------------------------------------------------> the results are identical in both the xterm and in gnome-terminal 3.4.1.1 and as you can see, the output of the stty -a command goes right up to the edge of the screen, while the typing does not go that far. I have found that I can get the desired result by setting the columns to a very large number, eg: $ stty cols 1800 this fixes both problems. Is it the right way to go about solving this problem? Will this "break" any of the output from programs? So far I have tried top and stty -a and these seem OK. more info as requested in the comments i found that if i cat some input into a file then the columns actually strech the full width of the terminal window: [peter@mine applications] $ cat > /tmp/asd aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaasssssssssssssssssssssssssssssssssssssssssssssssssssssssssssqqqqqqqqqqqqqqqq qqqq does this imply that it is actually bash that is restricting the number of columns and not the terminal? if so then how to alter the number of columns in bash?

  Read the article

• Perl under unix/linux

  - by folone

  Could anyone help me fix the following script: cat "test... test... test..." | perl -e '$??s:;s:s;;$?::s;;=]=>%-{<-|}<&|`{;;y; -/:-@[-`{-};`-{/" -;;s;;$_;see' It won't print to the output.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >