Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 34/314 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • OpenVPN Error : TLS Error: local/remote TLS keys are out of sync: [AF_INET]

    - by Lucidity
    Fist off thanks for reading this, I appreciate any and all suggestions. I am having some serious problems reconnecting to my OpenVPN client using Riseup.net's VPN. I have spent a few days banging my head against the wall in attempts to set this up on my iOS devices....but that is a whole other issue. I was however able to set it up on my Mac OS X specifically on my Windows Vista 32 bit BootCamp VM with relatively little trouble. To originally connect I only had to modify the recommended Config file very slightly (Config file included at the end of this post): - I had to enter the code directly into my config file - And change "dev tap" to "dev tun" So I was connected. (Note - I did test to ensure the VPN was actually working after I originally connected, it was. Also verified the .pem file (inserted as the coding in my config file) for authenticity). I left the VPN running. My computer went to sleep. Today I went to use the internet expecting (possibly incorrectly - I am now unsure if I was wrong to leave it running) to still be connected to the VPN. However I saw immediately I was not. I went to reconnect. And was (am) unable to. My logs after attempting to connect (and getting a connection failed dialog box) show everything working as it should (as far as I can tell) until the end where I get the following lines: Mon Sep 23 21:07:49 2013 us=276809 Initialization Sequence Completed Mon Sep 23 21:07:49 2013 us=276809 MANAGEMENT: >STATE:1379995669,CONNECTED,SUCCESS, OMITTED Mon Sep 23 21:22:50 2013 us=390350 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 21:23:39 2013 us=862180 TLS Error: local/remote TLS keys are out of sync: [AF_INET] VPN IP OMITTED [2] Mon Sep 23 21:23:57 2013 us=395183 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 22:07:41 2013 us=296898 TLS: soft reset sec=0 bytes=513834601/0 pkts=708032/0 Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=1, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=Riseup Networks, [email protected] Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=0, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=vpn.riseup.net Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA So I have searched for a solution online and I have included what I have attempted below, however I fear (know) I am not knowledgeable enough in this area to fix this myself. I apologize in advance for my ignorance. I do tech support for a living, but not this kind of tech support unfortunately. Other notes and troubleshooting done - - Windows Firewall is disabled completely, as well as other Anti-virus programs - Tor is disabled completely - No Proxies running - Time is correct in all locations - Router Firmware is up to date - Able to connect to the internet and as far as I can tell all necessary ports are open. - No settings have been altered since I was able to connect successfully. - Ethernet as well as wifi connections attempted, resulted in same error. Also tried adding the following lines to my config file (without success or change in error): persist-key persist-tun proto tcp (after reading that this error generally occurs on UDP connections, and is extremely rare on TCP) resolv-retry infinite (thinking the connection may have timed out since the issues occurred after leaving VPN connected during about 10 hrs of computer in sleep mode) All attempts resulted in exact same error code included at the top of this post. The original suggestions I found online stated - (regarding the TLS Error) - This error should resolve itself within 60 seconds, or if not quit wait 120 seconds and try again. (Which isnt the case here...) (regarding the Out of Sync" error) - If you continue to get "out of sync" errors and the link does not come up, then it means that something is probably wrong with your config file. You must use either ping and ping-restart on both sides of the connection, or keepalive on the server side of a client/server connection, in order to gracefully recover from "local/remote TLS keys are out of sync" errors. I wouldn't be surprised if my config file is lacking, or not correct. However I can confirm I followed the instructions to a tee. And was able to connect originally (and have not modified my settings or config file since I was able to connect to when the error began occurring). I have a very simple config file: client dev tun tun-mtu 1500 remote vpn.riseup.net auth-user-pass ca RiseupCA.pem redirect-gateway verb 4 <ca> -----BEGIN CERTIFICATE----- [OMITTED] -----END CERTIFICATE----- </ca> I would really appreciate any help or suggestions. I am at a total loss here, I know I'm asking a lot here. Though I am a new user on this site I help others on many forums including Microsoft's support community and especially Apple's support communities, so I will definitely pass on anything I learn here to help others. Thanks so so so much in advance for reading this.

    Read the article

  • Multiplayer card game using PHP/Ajax and mysql

    - by Alireza Seifi
    I am designing a map game, using PHP and MYSQL. I don't know how to make the players who sign-in to the website to see other players who are also connected to the site and be able to chat with one another. I want to design the game in such a way that 2 players can play with each other and be able to send messages during the game while others groups are playing at the same time. I have designed the map game successfully, but the problem is making the player 1 who log-in to site to see the player 2 who will also log-in and both can get connected to play each other. http://i.stack.imgur.com/YyCPG.png I will appreciate your responses.

    Read the article

  • Diving into OpenStack Network Architecture - Part 1

    - by Ronen Kofman
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} rkofman Normal rkofman 83 3045 2014-05-23T21:11:00Z 2014-05-27T06:58:00Z 3 1883 10739 Oracle Corporation 89 25 12597 12.00 140 Clean Clean false false false false EN-US X-NONE HE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi; mso-bidi-language:AR-SA;} Before we begin OpenStack networking has very powerful capabilities but at the same time it is quite complicated. In this blog series we will review an existing OpenStack setup using the Oracle OpenStack Tech Preview and explain the different network components through use cases and examples. The goal is to show how the different pieces come together and provide a bigger picture view of the network architecture in OpenStack. This can be very helpful to users making their first steps in OpenStack or anyone wishes to understand how networking works in this environment.  We will go through the basics first and build the examples as we go. According to the recent Icehouse user survey and the one before it, Neutron with Open vSwitch plug-in is the most widely used network setup both in production and in POCs (in terms of number of customers) and so in this blog series we will analyze this specific OpenStack networking setup. As we know there are many options to setup OpenStack networking and while Neturon + Open vSwitch is the most popular setup there is no claim that it is either best or the most efficient option. Neutron + Open vSwitch is an example, one which provides a good starting point for anyone interested in understanding OpenStack networking. Even if you are using different kind of network setup such as different Neutron plug-in or even not using Neutron at all this will still be a good starting point to understand the network architecture in OpenStack. The setup we are using for the examples is the one used in the Oracle OpenStack Tech Preview. Installing it is simple and it would be helpful to have it as reference. In this setup we use eth2 on all servers for VM network, all VM traffic will be flowing through this interface.The Oracle OpenStack Tech Preview is using VLANs for L2 isolation to provide tenant and network isolation. The following diagram shows how we have configured our deployment: This first post is a bit long and will focus on some basic concepts in OpenStack networking. The components we will be discussing are Open vSwitch, network namespaces, Linux bridge and veth pairs. Note that this is not meant to be a comprehensive review of these components, it is meant to describe the component as much as needed to understand OpenStack network architecture. All the components described here can be further explored using other resources. Open vSwitch (OVS) In the Oracle OpenStack Tech Preview OVS is used to connect virtual machines to the physical port (in our case eth2) as shown in the deployment diagram. OVS contains bridges and ports, the OVS bridges are different from the Linux bridge (controlled by the brctl command) which are also used in this setup. To get started let’s view the OVS structure, use the following command: # ovs-vsctl show 7ec51567-ab42-49e8-906d-b854309c9edf     Bridge br-int         Port br-int             Interface br-int type: internal         Port "int-br-eth2"             Interface "int-br-eth2"     Bridge "br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2" ovs_version: "1.11.0" We see a standard post deployment OVS on a compute node with two bridges and several ports hanging off of each of them. The example above is a compute node without any VMs, we can see that the physical port eth2 is connected to a bridge called “br-eth2”. We also see two ports "int-br-eth2" and "phy-br-eth2" which are actually a veth pair and form virtual wire between the two bridges, veth pairs are discussed later in this post. When a virtual machine is created a port is created on one the br-int bridge and this port is eventually connected to the virtual machine (we will discuss the exact connectivity later in the series). Here is how OVS looks after a VM was launched: # ovs-vsctl show efd98c87-dc62-422d-8f73-a68c2a14e73d     Bridge br-int         Port "int-br-eth2"             Interface "int-br-eth2"         Port br-int             Interface br-int type: internal         Port "qvocb64ea96-9f" tag: 1             Interface "qvocb64ea96-9f"     Bridge "br-eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2" ovs_version: "1.11.0" Bridge "br-int" now has a new port "qvocb64ea96-9f" which connects to the VM and tagged with VLAN 1. Every VM which will be launched will add a port on the “br-int” bridge for every network interface the VM has. Another useful command on OVS is dump-flows for example: # ovs-ofctl dump-flows br-int NXST_FLOW reply (xid=0x4): cookie=0x0, duration=735.544s, table=0, n_packets=70, n_bytes=9976, idle_age=17, priority=3,in_port=1,dl_vlan=1000 actions=mod_vlan_vid:1,NORMAL cookie=0x0, duration=76679.786s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=1 actions=drop cookie=0x0, duration=76681.36s, table=0, n_packets=68, n_bytes=7950, idle_age=17, hard_age=65534, priority=1 actions=NORMAL As we see the port which is connected to the VM has the VLAN tag 1. However the port on the VM network (eth2) will be using tag 1000. OVS is modifying the vlan as the packet flow from the VM to the physical interface. In OpenStack the Open vSwitch agent takes care of programming the flows in Open vSwitch so the users do not have to deal with this at all. If you wish to learn more about how to program the Open vSwitch you can read more about it at http://openvswitch.org looking at the documentation describing the ovs-ofctl command. Network Namespaces (netns) Network namespaces is a very cool Linux feature can be used for many purposes and is heavily used in OpenStack networking. Network namespaces are isolated containers which can hold a network configuration and is not seen from outside of the namespace. A network namespace can be used to encapsulate specific network functionality or provide a network service in isolation as well as simply help to organize a complicated network setup. Using the Oracle OpenStack Tech Preview we are using the latest Unbreakable Enterprise Kernel R3 (UEK3), this kernel provides a complete support for netns. Let's see how namespaces work through couple of examples to control network namespaces we use the ip netns command: Defining a new namespace: # ip netns add my-ns # ip netns list my-ns As mentioned the namespace is an isolated container, we can perform all the normal actions in the namespace context using the exec command for example running the ifconfig command: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:16436 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) We can run every command in the namespace context, this is especially useful for debug using tcpdump command, we can ping or ssh or define iptables all within the namespace. Connecting the namespace to the outside world: There are various ways to connect into a namespaces and between namespaces we will focus on how this is done in OpenStack. OpenStack uses a combination of Open vSwitch and network namespaces. OVS defines the interfaces and then we can add those interfaces to namespace. So first let's add a bridge to OVS: # ovs-vsctl add-br my-bridge Now let's add a port on the OVS and make it internal: # ovs-vsctl add-port my-bridge my-port # ovs-vsctl set Interface my-port type=internal And let's connect it into the namespace: # ip link set my-port netns my-ns Looking inside the namespace: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:65536 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) my-port   Link encap:Ethernet HWaddr 22:04:45:E2:85:21           BROADCAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) Now we can add more ports to the OVS bridge and connect it to other namespaces or other device like physical interfaces. Neutron is using network namespaces to implement network services such as DCHP, routing, gateway, firewall, load balance and more. In the next post we will go into this in further details. Linux Bridge and veth pairs Linux bridge is used to connect the port from OVS to the VM. Every port goes from the OVS bridge to a Linux bridge and from there to the VM. The reason for using regular Linux bridges is for security groups’ enforcement. Security groups are implemented using iptables and iptables can only be applied to Linux bridges and not to OVS bridges. Veth pairs are used extensively throughout the network setup in OpenStack and are also a good tool to debug a network problem. Veth pairs are simply a virtual wire and so veths always come in pairs. Typically one side of the veth pair will connect to a bridge and the other side to another bridge or simply left as a usable interface. In this example we will create some veth pairs, connect them to bridges and test connectivity. This example is using regular Linux server and not an OpenStack node: Creating a veth pair, note that we define names for both ends: # ip link add veth0 type veth peer name veth1 # ifconfig -a . . veth0     Link encap:Ethernet HWaddr 5E:2C:E6:03:D0:17           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) veth1     Link encap:Ethernet HWaddr E6:B6:E2:6D:42:B8           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) . . To make the example more meaningful this we will create the following setup: veth0 => veth1 => br-eth3 => eth3 ======> eth2 on another Linux server br-eth3 – a regular Linux bridge which will be connected to veth1 and eth3 eth3 – a physical interface with no IP on it, connected to a private network eth2 – a physical interface on the remote Linux box connected to the private network and configured with the IP of 50.50.50.1 Once we create the setup we will ping 50.50.50.1 (the remote IP) through veth0 to test that the connection is up: # brctl addbr br-eth3 # brctl addif br-eth3 eth3 # brctl addif br-eth3 veth1 # brctl show bridge name     bridge id               STP enabled     interfaces br-eth3         8000.00505682e7f6       no              eth3                                                         veth1 # ifconfig veth0 50.50.50.50 # ping -I veth0 50.50.50.51 PING 50.50.50.51 (50.50.50.51) from 50.50.50.50 veth0: 56(84) bytes of data. 64 bytes from 50.50.50.51: icmp_seq=1 ttl=64 time=0.454 ms 64 bytes from 50.50.50.51: icmp_seq=2 ttl=64 time=0.298 ms When the naming is not as obvious as the previous example and we don't know who are the paired veth interfaces we can use the ethtool command to figure this out. The ethtool command returns an index we can look up using ip link command, for example: # ethtool -S veth1 NIC statistics: peer_ifindex: 12 # ip link . . 12: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 Summary That’s all for now, we quickly reviewed OVS, network namespaces, Linux bridges and veth pairs. These components are heavily used in the OpenStack network architecture we are exploring and understanding them well will be very useful when reviewing the different use cases. In the next post we will look at how the OpenStack network is laid out connecting the virtual machines to each other and to the external world. @RonenKofman

    Read the article

  • Integrating Twitter Into An ASP.NET Website Using OAuth

    Earlier this year I wrote an article about Twitterizer, an open-source .NET library that can be used to integrate your application with Twitter. Using Twitterizer you can allow your visitors to post tweets, view their timeline, and much more, all without leaving your website. The original article, Integrating Twitter Into An ASP.NET Website, showed how to post tweets and view a timeline to a particular Twitter account using Twitterizer 1.0. To post a tweet to a specific account, Twitterizer 1.0 uses basic authentication. Basic authentication is a very simple authentication scheme. For an application to post a tweet to JohnDoe's Twitter account, it would submit JohnDoe's username and password (along with the tweet text) to Twitter's servers. Basic authentication, while easy to implement, is not an ideal authentication scheme as it requires that the integrating application know the username(s) and password(s) of the accounts that it is connected to. Consequently, a user must share her password in order to connect her Twitter account with the application. Such password sharing is not only insecure, but it can also cause difficulties down the line if the user changes her password or decides that she no longer wants to connect her account to certain applications (but wants to remain connected to others). To remedy these issues, Twitter introduced support for OAuth, which is a simple, secure protocol for granting API access. In a nutshell, OAuth allows a user to connect an application to their Twitter account without having to share their password. Instead, the user is sent to Twitter's website where they confirm whether they want to connect to the application. Upon confirmation, Twitter generates an token that is then sent back to the application. The application then submits this token when integrating with the user's account. The token serves as proof that the user has allowed this application access to their account. (Twitter users can view what application's they're connected to and may revoke these tokens on an application-by-application basis.) In late 2009, Twitter announced that it was ending its support for basic authentication in June 2010. As a result, the code examined in Integrating Twitter Into An ASP.NET Website, which uses basic authentication, will no longer work once the cut off date is reached. The good news is that the Twitterizer version 2.0 supports OAuth. This article examines how to use Twitterizer 2.0 and OAuth from a website. Specifically, we'll see how to retrieve and display a user's latest tweets and how to post a tweet from an ASP.NET page. Read on to learn more! Read More >

    Read the article

  • Integrating Twitter Into An ASP.NET Website Using OAuth

    Earlier this year I wrote an article about Twitterizer, an open-source .NET library that can be used to integrate your application with Twitter. Using Twitterizer you can allow your visitors to post tweets, view their timeline, and much more, all without leaving your website. The original article, Integrating Twitter Into An ASP.NET Website, showed how to post tweets and view a timeline to a particular Twitter account using Twitterizer 1.0. To post a tweet to a specific account, Twitterizer 1.0 uses basic authentication. Basic authentication is a very simple authentication scheme. For an application to post a tweet to JohnDoe's Twitter account, it would submit JohnDoe's username and password (along with the tweet text) to Twitter's servers. Basic authentication, while easy to implement, is not an ideal authentication scheme as it requires that the integrating application know the username(s) and password(s) of the accounts that it is connected to. Consequently, a user must share her password in order to connect her Twitter account with the application. Such password sharing is not only insecure, but it can also cause difficulties down the line if the user changes her password or decides that she no longer wants to connect her account to certain applications (but wants to remain connected to others). To remedy these issues, Twitter introduced support for OAuth, which is a simple, secure protocol for granting API access. In a nutshell, OAuth allows a user to connect an application to their Twitter account without having to share their password. Instead, the user is sent to Twitter's website where they confirm whether they want to connect to the application. Upon confirmation, Twitter generates an token that is then sent back to the application. The application then submits this token when integrating with the user's account. The token serves as proof that the user has allowed this application access to their account. (Twitter users can view what application's they're connected to and may revoke these tokens on an application-by-application basis.) In late 2009, Twitter announced that it was ending its support for basic authentication in June 2010. As a result, the code examined in Integrating Twitter Into An ASP.NET Website, which uses basic authentication, will no longer work once the cut off date is reached. The good news is that the Twitterizer version 2.0 supports OAuth. This article examines how to use Twitterizer 2.0 and OAuth from a website. Specifically, we'll see how to retrieve and display a user's latest tweets and how to post a tweet from an ASP.NET page. Read on to learn more! Read More >Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Correct Display configuration. Errors while trying to arrange displays

    - by David Russell Parrish Bojrquez
    I am trying to set up my tv with my laptop trough a VGA cable. The display application in Ubuntu throws a lot of errors to me and I have given up in trying to do it myself. I try to apply the 1920 1080 display. The selected configuration for displays could not be applied Requested size (3200, 1080) exceeds 3D hardware limit (2048, 2048). You must either rearrange the displays so that they fit within a (2048, 2048) square or select the Ubuntu 2D session at login. And Also this: Failed to apply configuration: %s GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: Requested size (3200, 1080) exceeds 3D hardware limit (2048, 2048). You must either rearrange the displays so that they fit within a (2048, 2048) square or select the Ubuntu 2D session at login. Please Help. @Leozitop No I don't see anything when connected to 1920 1080 because the setup fails before actually applying. Yes there are other resolutions which do work. I believe the problem has something to do with the rotation it is set up. My Ubuntu Display application has only clockwise and counterclockwise options for the TV display. I really don't know why this is happening. Basic procedure: Plug in cable, did not get the resolution I wanted. Changed settings, applied them. Re-peat until desired display is shown. I'm not a computer illiterate, really it baffles me that this is happening. Output of xrandr: david@LapUbuntu:~$ xrandr Screen 0: minimum 320 x 200, current 1880 x 800, maximum 4096 x 4096 LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm 1280x800 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected 600x800+1280+0 left (normal left inverted right x axis y axis) 1600mm x 900mm 1920x1080 60.0 + 1280x1024 60.0 1360x768 60.0 1280x720 60.0 1024x768 60.0 800x600 60.3* 640x480 60.0 TV1 unknown connection (normal left inverted right x axis y axis) 848x480 59.9 + 640x480 59.9 + 1024x768 59.9 800x600 59.9 Note that VGA says left and indeed it is, but no other option was available in the display. Also, note the TV1 unknown connection which I have no idea what it is. Note, also, that this has nothing to do with the display since W7 on the computer works fine and since while boot up, and also, before starting session in ubuntu the rotation is normal. I'll also mention that I HAVE re-installed Ubuntu since I had posted this question from a Live CD of 12.04 LTS. And that before the posting of the question also using 12.04 before another backup that I had to do, the VGA setup was fine without any problems.

    Read the article

  • JavaOne Afterglow by Simon Ritter

    - by JuergenKress
    Last week was the eighteenth JavaOne conference and I thought it would be a good idea to write up my thoughts about how things went. Firstly thanks to Yoshio Terada for the photos, I didn't bother bringing a camera with me so it's good to have some pictures to add to the words. Things kicked off full-throttle on Sunday.  We had the Java Champions and JUG leaders breakfast, which was a great way to meet up with a lot of familiar faces and start talking all things Java.  At midday the show really started with the Strategy and Technical Keynotes.  This was always going to be tougher job than some years because there was no big shiny ball to reveal to the audience.  With the Java EE 7 spec being finalised a few months ago and Java SE 8, Java ME 8 and JDK8 not due until the start of next year there was not going to be any big announcement.  I thought both keynotes worked really well each focusing on the things most important to Java developers: Strategy One of the things that is becoming more and more prominent in many companies marketing is the Internet of Things (IoT).  We've moved from the conventional desktop/laptop environment to much more mobile connected computing with smart phones and tablets.  The next wave of the internet is not just billions of people connected, but 10s or 100s of billions of devices connected to the network, all generating data and providing much more precise control of almost any process you can imagine.  This ties into the ideas of Big Data and Cloud Computing, but implementation is certainly not without its challenges.  As Peter Utzschneider explained it's about three Vs: Volume, Velocity and Value.  All these devices will create huge volumes of data at very high speed; to avoid being overloaded these devices will need some sort of processing capabilities that can filter the useful data from the redundant.  The raw data then needs to be turned into useful information that has value.  To make this happen will require applications on devices, at gateways and on the back-end servers, all very tightly integrated.  This is where Java plays a pivotal role, write once, run everywhere becomes essential, having nine million developers fluent in the language makes it the defacto lingua franca of IoT.  There will be lots more information on how this will become a reality, so watch this space. Technical How do we make the IoT a reality, technically?  Using the game of chess Mark Reinhold, with the help of people like John Ceccarelli, Jasper Potts and Richard Bair, showed what you could do.  Using Java EE on the back end, Java SE and JavaFX on the desktop and Java ME Embedded and JavaFX on devices they showed a complete end-to-end demo. This was really impressive, using 3D features from JavaFX 8 (that's included with JDK8) to make a 3D animated Duke chess board.  Jasper also unveiled the "DukePad" a home made tablet using a Raspberry Pi, touch screen and accelerometer. Although the Raspberry Pi doesn't have earth shattering CPU performance (about the same level as a mid 1990s Pentium), it does have really quite good GPU performance so the GUI works really well.  The plans are all open sourced and available here.  One small, but very significant announcement was that Java SE will now be included with the NOOB and Raspbian Linux distros provided by the Raspberry Pi foundation (these can be found here).  No more hassle having to download and install the JDK after you've flashed your SD card OS image.  The finale was the Raspberry Pi powered chess playing robot.  Really very, very cool.  I talked to Jasper about this and he told me each of the chess pieces had been 3D printed and then he had to use acetone to give them a glossy finish (not sure what his wife thought of him spending hours in the kitchen in a gas mask!)  The way the robot arm worked was very impressive as it did not have any positioning data (like a potentiometer connected to each motor), but relied purely on carefully calibrated timings to get the arm to the right place.  Having done things like this myself in the past I know how easy it is to find a small error gets magnified into very big mistakes. Here's some pictures from the keynote: The "Dukepad" architecture Nice clear perspex case so you can see the innards. The very nice 3D chess set.  Maya's obviously a great tool. Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Simon Ritter,Java One,OOW,Oracle OpenWorld,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • newly added files don't sync down

    - by poolie
    I added some files into my Ubuntu One/My Files folder on my desktop machine. I can see them in the U1 web ui. My laptop is connected to the same U1 account, and in the Ubuntu One preference pane I can see it's connected to the account. However, my new files never download. In syncdaemon.log I can see it checking a bunch of other existing files, and then the file ends with many repetitions of 2011-01-04 11:05:42,277 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'READY' (queues WORKING_ON_METADATA connection 'Not User With Network')>; queues: metadata: 1; content: 0; hash: 0, fsm-cache: hit=5086 miss=69) ---- I do have a working network connection. What do I do now?

    Read the article

  • Load-balancing between a Procurve switch and a server

    - by vlad
    Hello I've been searching around the web for this problem i've been having. It's similar in a way to this question: How exactly & specifically does layer 3 LACP destination address hashing work? My setup is as follows: I have a central switch, a Procurve 2510G-24, image version Y.11.16. It's the center of a star topology, there are four switches connected to it via a single gigabit link. Those switches service the users. On the central switch, I have a server with two gigabit interfaces that I want to bond together in order to achieve higher throughput, and two other servers that have single gigabit connections to the switch. The topology looks as follows: sw1 sw2 sw3 sw4 | | | | --------------------- | sw0 | --------------------- || | | srv1 srv2 srv3 The servers were running FreeBSD 8.1. On srv1 I set up a lagg interface using the lacp protocol, and on the switch I set up a trunk for the two ports using lacp as well. The switch showed that the server was a lacp partner, I could ping the server from another computer, and the server could ping other computers. If I unplugged one of the cables, the connection would keep working, so everything looked fine. Until I tested throughput. There was only one link used between srv1 and sw0. All testing was conducted with iperf, and load distribution was checked with systat -ifstat. I was looking to test the load balancing for both receive and send operations, as I want this server to be a file server. There were therefore two scenarios: iperf -s on srv1 and iperf -c on the other servers iperf -s on the other servers and iperf -c on srv1 connected to all the other servers. Every time only one link was used. If one cable was unplugged, the connections would keep going. However, once the cable was plugged back in, the load was not distributed. Each and every server is able to fill the gigabit link. In one-to-one test scenarios, iperf was reporting around 940Mbps. The CPU usage was around 20%, which means that the servers could withstand a doubling of the throughput. srv1 is a dell poweredge sc1425 with onboard intel 82541GI nics (em driver on freebsd). After troubleshooting a previous problem with vlan tagging on top of a lagg interface, it turned out that the em could not support this. So I figured that maybe something else is wrong with the em drivers and / or lagg stack, so I started up backtrack 4r2 on this same server. So srv1 now uses linux kernel 2.6.35.8. I set up a bonding interface bond0. The kernel module was loaded with option mode=4 in order to get lacp. The switch was happy with the link, I could ping to and from the server. I could even put vlans on top of the bonding interface. However, only half the problem was solved: if I used srv1 as a client to the other servers, iperf was reporting around 940Mbps for each connection, and bwm-ng showed, of course, a nice distribution of the load between the two nics; if I run the iperf server on srv1 and tried to connect with the other servers, there was no load balancing. I thought that maybe I was out of luck and the hashes for the two mac addresses of the clients were the same, so I brought in two new servers and tested with the four of them at the same time, and still nothing changed. I tried disabling and reenabling one of the links, and all that happened was the traffic switched from one link to the other and back to the first again. I also tried setting the trunk to "plain trunk mode" on the switch, and experimented with other bonding modes (roundrobin, xor, alb, tlb) but I never saw any traffic distribution. One interesting thing, though: one of the four switches is a Cisco 2950, image version 12.1(22)EA7. It has 48 10/100 ports and 2 gigabit uplinks. I have a server (call it srv4) with a 4 channel trunk connected to it (4x100), FreeBSD 8.0 release. The switch is connected to sw0 via gigabit. If I set up an iperf server on one of the servers connected to sw0 and a client on srv4, ALL 4 links are used, and iperf reports around 330Mbps. systat -ifstat shows all four interfaces are used. The cisco port-channel uses src-mac to balance the load. The HP should use both the source and destination according to the manual, so it should work as well. Could this mean there is some bug in the HP firmware? Am I doing something wrong?

    Read the article

  • Virtualbox: host only networking - proxy internet connection

    - by Russell
    I'll ask my question first, then give details about where I am coming from: Is it possible to use host only, then have ubuntu act as a proxy to provide internet access to windows? If so, how? I am trying to get the right combination of networking for my virtualbox windows client VM (win7). My host is ubuntu 10.10 (maverick). I believe I understand the basic network options (please correct me if I am incorrect): NAT - Host can't communicate with guest but guest has access to all host's adapters Host only - Separate adapter but guest has no net access Bridged - bridge an adapter in the host with the virtual adapter to give the host access to the host adapter I am trying to give my win guest internet access, but also access the host in a separate network. Bridged only works when the host is connected to the internet (this is a laptop) so when it's not connected the network is down. Thanks I appreciate your help.

    Read the article

  • JSR 360 and JSR 361: A Big Leap for Java ME 8

    - by terrencebarr
    It might have gone unnoticed to some, but Java ME took a big leap forward a couple of weeks ago with the filing of two new JSRs: JSR 360: “Connected Limited Device Configuration 8″ (aka CLDC 8) JSR 361: “Java ME Embedded Profile” (aka ME EP) Together, these two JSRs will significantly update, enhance, and modernize the Java ME platform, and specifically small embedded Java, with a host of new features and functionality. JSR 360 – Connected Limited Device Configuration 8 CLDC 8 is based on JSR 139 (CLDC 1.1) and updates the core Java ME VM, language support, libraries, and features to be aligned with Java SE 8. This will include: VM updated to comply with the JVM language specification version 2 Support for SE 7/8 language features like Generics, Assertions, Annotations, Try-with-Resources, and more New libraries such as Collections, NIO subset, Logging API subset A consolidated and enhanced Generic Connection Framework for multi-protocol I/O With CLDC 8, Java ME and Java SE are entering their next phase of alignment – making Java the only technology today that truly scales application development, code re-use, and tooling across the whole range of IT platforms, from small embedded to large enterprise. JSR 361 – Java ME Embedded Profile ME EP is based on JSR 228 (IMP-NG) and updates the specification in key areas to provide a powerful and flexible application environment for small embedded Java platforms, building on the features of CLDC 8:  A new, lightweight component and services model Shared libraries Multi-application concurrency, inter-application communication, and event system Application management API optionality, to address low-footprint use cases With ME EP, application developers will have a modern application environment which allows development and deployment of  modular, robust, sophisticated, and footprint-optimized solutions for a wide range of embedded use cases and devices. Summary While these JSRs are still under development, it’s clear that there are exciting new times ahead for Java ME – turning into a serious application platform while maintaining the focus on resource-constrained devices to address the expected explosion of small, smart, and connected embedded platforms. To learn more, click on the above links for JSR 360 and JSR 361. Or review the JavaOne 2012 online presentations on the topic: CON11300: Expanding the reach of the Java ME Platform CON5943: Java ME 8 Service Platform And stay tuned for more in this space! Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "jsr 360", "jsr 361", "me 8", embedded, Embedded Java, JCP

    Read the article

  • JSR 360 and JSR 361: A Big Leap for Java ME 8

    - by terrencebarr
    It might have gone unnoticed to some, but Java ME took a big leap forward a couple of weeks ago with the filing of two new JSRs: JSR 360: “Connected Limited Device Configuration 8″ (aka CLDC 8) JSR 361: “Java ME Embedded Profile” (aka ME EP) Together, these two JSRs will significantly update, enhance, and modernize the Java ME platform, and specifically small embedded Java, with a host of new features and functionality. JSR 360 – Connected Limited Device Configuration 8 CLDC 8 is based on JSR 139 (CLDC 1.1) and updates the core Java ME VM, language support, libraries, and features to be aligned with Java SE 8. This will include: VM updated to comply with the JVM language specification version 2 Support for SE 7/8 language features like Generics, Assertions, Annotations, Try-with-Resources, and more New libraries such as Collections, NIO subset, Logging API subset A consolidated and enhanced Generic Connection Framework for multi-protocol I/O With CLDC 8, Java ME and Java SE are entering their next phase of alignment – making Java the only technology today that truly scales application development, code re-use, and tooling across the whole range of IT platforms, from small embedded to large enterprise. JSR 361 – Java ME Embedded Profile ME EP is based on JSR 228 (IMP-NG) and updates the specification in key areas to provide a powerful and flexible application environment for small embedded Java platforms, building on the features of CLDC 8:  A new, lightweight component and services model Shared libraries Multi-application concurrency, inter-application communication, and event system Application management API optionality, to address low-footprint use cases With ME EP, application developers will have a modern application environment which allows development and deployment of  modular, robust, sophisticated, and footprint-optimized solutions for a wide range of embedded use cases and devices. Summary While these JSRs are still under development, it’s clear that there are exciting new times ahead for Java ME – turning into a serious application platform while maintaining the focus on resource-constrained devices to address the expected explosion of small, smart, and connected embedded platforms. To learn more, click on the above links for JSR 360 and JSR 361. Or review the JavaOne 2012 online presentations on the topic: CON11300: Expanding the reach of the Java ME Platform CON5943: Java ME 8 Service Platform And stay tuned for more in this space! Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "jsr 360", "jsr 361", "me 8", embedded, Embedded Java, JCP

    Read the article

  • Unable to sign in. How to debug?

    - by Dmitriy Budnik
    I had to reboot system with reset button. After reboot I can't sign in. When I enter my password It seems like X-server just restarts. I can sing in as guest and also I can sign in in text TTY. Here is first 150 lines of my lightdm.log: [+0.04s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.04s] DEBUG: Starting Light Display Manager 1.2.1, UID=0 PID=1070 [+0.04s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf [+0.04s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.04s] DEBUG: Registered seat module xlocal [+0.04s] DEBUG: Registered seat module xremote [+0.04s] DEBUG: Adding default seat [+0.04s] DEBUG: Starting seat [+0.04s] DEBUG: Starting new display for automatic login as user dmytro [+0.04s] DEBUG: Starting local X display [+3.64s] DEBUG: X server :0 will replace Plymouth [+3.66s] DEBUG: Using VT 7 [+3.66s] DEBUG: Activating VT 7 [+3.66s] DEBUG: Logging to /var/log/lightdm/x-0.log [+3.66s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+3.66s] DEBUG: Launching X Server [+3.66s] DEBUG: Launching process 1154: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+3.66s] DEBUG: Waiting for ready signal from X server :0 [+3.66s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+3.66s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+10.78s] DEBUG: Got signal 10 from process 1154 [+10.78s] DEBUG: Got signal from X server :0 [+10.78s] DEBUG: Stopping Plymouth, X server is ready [+10.80s] DEBUG: Connecting to XServer :0 [+10.80s] DEBUG: Automatically logging in user dmytro [+10.80s] DEBUG: Started session 1303 with service 'lightdm-autologin', username 'dmytro' [+13.22s] DEBUG: Session 1303 authentication complete with return value 0: Success [+13.26s] DEBUG: Autologin user dmytro authorized [+13.27s] DEBUG: Autologin using session ubuntu [+14.44s] DEBUG: Dropping privileges to uid 1000 [+14.48s] DEBUG: Restoring privileges [+14.49s] DEBUG: Dropping privileges to uid 1000 [+14.49s] DEBUG: Writing /home/dmytro/.dmrc [+14.61s] DEBUG: Restoring privileges [+14.81s] DEBUG: Starting session ubuntu as user dmytro [+14.81s] DEBUG: Session 1303 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+15.76s] DEBUG: New display ready, switching to it [+15.76s] DEBUG: Activating VT 7 [+15.76s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0 [+16.63s] DEBUG: Session 1303 exited with return value 0 [+16.63s] DEBUG: User session quit [+16.63s] DEBUG: Stopping display [+16.63s] DEBUG: Sending signal 15 to process 1154 [+17.19s] DEBUG: Process 1154 exited with return value 0 [+17.19s] DEBUG: X server stopped [+17.19s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+17.19s] DEBUG: Releasing VT 7 [+17.19s] DEBUG: Display server stopped [+17.19s] DEBUG: Display stopped [+17.19s] DEBUG: Active display stopped, switching to greeter [+17.19s] DEBUG: Switching to greeter [+17.19s] DEBUG: Starting new display for greeter [+17.19s] DEBUG: Starting local X display [+17.19s] DEBUG: Using VT 7 [+17.19s] DEBUG: Logging to /var/log/lightdm/x-0.log [+17.19s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+17.19s] DEBUG: Launching X Server [+17.19s] DEBUG: Launching process 1563: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+17.19s] DEBUG: Waiting for ready signal from X server :0 [+17.48s] DEBUG: Got signal 10 from process 1563 [+17.48s] DEBUG: Got signal from X server :0 [+17.48s] DEBUG: Connecting to XServer :0 [+17.48s] DEBUG: Starting greeter [+17.48s] DEBUG: Started session 1575 with service 'lightdm', username 'lightdm' [+17.61s] DEBUG: Session 1575 authentication complete with return value 0: Success [+17.61s] DEBUG: Greeter authorized [+17.61s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+17.68s] DEBUG: Session 1575 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+20.86s] DEBUG: Greeter connected version=1.2.1 [+20.86s] DEBUG: Greeter connected, display is ready [+20.86s] DEBUG: New display ready, switching to it [+20.86s] DEBUG: Activating VT 7 [+20.86s] DEBUG: Stopping greeter display being switched from [+24.90s] DEBUG: Greeter start authentication for dmytro [+24.90s] DEBUG: Started session 1746 with service 'lightdm', username 'dmytro' [+25.10s] DEBUG: Session 1746 got 1 message(s) from PAM [+25.10s] DEBUG: Prompt greeter with 1 message(s) [+31.87s] DEBUG: Continue authentication [+33.75s] DEBUG: Session 1746 authentication complete with return value 7: Authentication failure [+33.75s] DEBUG: Authenticate result for user dmytro: Authentication failure [+33.75s] DEBUG: Greeter start authentication for dmytro [+33.75s] DEBUG: Session 1746: Sending SIGTERM [+33.75s] DEBUG: Started session 2264 with service 'lightdm', username 'dmytro' [+33.75s] DEBUG: Session 2264 got 1 message(s) from PAM [+33.75s] DEBUG: Prompt greeter with 1 message(s) [+36.41s] DEBUG: Continue authentication [+36.53s] DEBUG: Session 2264 authentication complete with return value 0: Success [+36.53s] DEBUG: Authenticate result for user dmytro: Success [+36.54s] DEBUG: User dmytro authorized [+36.54s] DEBUG: Greeter requests session ubuntu [+36.54s] DEBUG: Using session ubuntu [+36.54s] DEBUG: Stopping greeter [+36.54s] DEBUG: Session 1575: Sending SIGTERM [+37.41s] DEBUG: Greeter closed communication channel [+37.41s] DEBUG: Session 1575 exited with return value 0 [+37.41s] DEBUG: Greeter quit [+37.42s] DEBUG: Dropping privileges to uid 1000 [+37.42s] DEBUG: Restoring privileges [+37.43s] DEBUG: Dropping privileges to uid 1000 [+37.43s] DEBUG: Writing /home/dmytro/.dmrc [+38.35s] DEBUG: Restoring privileges [+40.37s] DEBUG: Starting session ubuntu as user dmytro [+40.37s] DEBUG: Session 2264 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+40.39s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1 [+50.78s] DEBUG: Session 2264 exited with return value 0 [+50.78s] DEBUG: User session quit [+50.78s] DEBUG: Stopping display [+50.78s] DEBUG: Sending signal 15 to process 1563 [+51.53s] DEBUG: Process 1563 exited with return value 0 [+51.53s] DEBUG: X server stopped [+51.53s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+51.53s] DEBUG: Releasing VT 7 [+51.53s] DEBUG: Display server stopped [+51.53s] DEBUG: Display stopped [+51.53s] DEBUG: Active display stopped, switching to greeter [+51.53s] DEBUG: Switching to greeter [+51.53s] DEBUG: Starting new display for greeter [+51.53s] DEBUG: Starting local X display [+51.53s] DEBUG: Using VT 7 [+51.53s] DEBUG: Logging to /var/log/lightdm/x-0.log [+51.53s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+51.53s] DEBUG: Launching X Server [+51.53s] DEBUG: Launching process 2894: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+51.53s] DEBUG: Waiting for ready signal from X server :0 [+51.75s] DEBUG: Got signal 10 from process 2894 [+51.75s] DEBUG: Got signal from X server :0 [+51.75s] DEBUG: Connecting to XServer :0 [+51.75s] DEBUG: Starting greeter [+51.75s] DEBUG: Started session 2898 with service 'lightdm', username 'lightdm' [+51.76s] DEBUG: Session 2898 authentication complete with return value 0: Success [+51.76s] DEBUG: Greeter authorized [+51.76s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+51.76s] DEBUG: Session 2898 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+53.26s] DEBUG: Greeter connected version=1.2.1 [+53.26s] DEBUG: Greeter connected, display is ready [+53.26s] DEBUG: New display ready, switching to it [+53.26s] DEBUG: Activating VT 7 [+53.26s] DEBUG: Stopping greeter display being switched from [+54.17s] DEBUG: Greeter start authentication for dmytro [+54.17s] DEBUG: Started session 3152 with service 'lightdm', username 'dmytro' [+54.18s] DEBUG: Session 3152 got 1 message(s) from PAM [+54.18s] DEBUG: Prompt greeter with 1 message(s) [+58.61s] DEBUG: Continue authentication [+58.65s] DEBUG: Session 3152 authentication complete with return value 0: Success [+58.65s] DEBUG: Authenticate result for user dmytro: Success [+58.66s] DEBUG: User dmytro authorized [+58.66s] DEBUG: Greeter requests session ubuntu [+58.66s] DEBUG: Using session ubuntu [+58.66s] DEBUG: Stopping greeter [+58.66s] DEBUG: Session 2898: Sending SIGTERM How can I fix it? What other .log files could possibly give me a clue? Update: Possibly it's duplicate of Desktop login fails, terminal works

    Read the article

  • Installing Ubuntu 10.04 to external HDD overwrites the MBR of the internal HDD

    - by zkrpar
    I have a Asus A42F laptop which has Windows 7 32 bit installed on it's internal HDD. I have just installed Ubuntu 10.04 on a portable HDD using the laptop. Now my laptop does not boot Windows 7 if the portable HDD is disconnected. I can only get the boot menu when the portable HDD is connected. The portable HDD does not boot when connected to another computer. Please help me, I want to: Boot Windows from the internal drive, without GRUB Boot Ubuntu from the external drive via the BIOS boot menu (F8 or F12)

    Read the article

  • HDMI with Intel Mobile 4 Graphics Controller

    - by roel
    When connecting my TV over HDMI, it shows up in display settings and xrandr: Aspire1825PTZ:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) Aspire1825PTZ:~$ xrandr Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected (normal left inverted right x axis y axis) 720x576 50.0 720x480 59.9 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis) TV1 disconnected (normal left inverted right x axis y axis) However, the resolution is way too low and the screen remains black. Everything works fine in Windows, but I'd rather not reboot just to watch a film... Could anyone help me please?

    Read the article

  • DVI+HDMI out, at startup only HDMI is available

    - by Alasjo
    I have my computer next to my hdtv. The main screen is connected via DVI while the tv is connected via HDMI. If I start the computer without the HDMI plugged in, everything is ok: I see the login screen and sound is output through analog out. But if the HDMI is plugged in before I start the computer, only the tv gets an image (the login screen), the main screen is black or at some times purple, but even after login the main screen is black. Also sound is still output through analog out. Not sure whether it's a hw issue, or an Ubuntu issue, or a combined hardware/Ubuntu compatibility issue (Sandy Bridge). This is my setup: Ubuntu 11.10 Oneiric Ocelot (64bit) ASUS P8H67-M LE Intel Core i3-2100 I don't have any custom video settings, my main screen is recognized properly when HDMI is not plugged in at startup. Cheers.

    Read the article

  • website address point to localhost

    - by munir ahmad
    Today in firefox while surfing the internet, I opened a website it asked "This site may harm your computer" if you want to open this website add it in exception list. I added a website under exception list and trust this website. After that situation, whenever I opend this website, it always points toward the localhost untill internet connected. I have setup localhost through apache (xampp server). If internet not connected this website do not open anything but localhost still work as usaual. How can I remove this situation so that this website do not point to locathost? I am using winxp sp3. Same problem now appear in all browsers too.

    Read the article

  • How to mount an external Soundcard during startup?

    - by Moe
    I have an external sound card (Soundblaster XFi HD) connected to my Ubuntu 12.04 32-bit. that won't show up automatically after booting. After each boot process I need to plug the card out of the USB port and reconnect it, then it is found by the system and automatically used. I would like to either have it connected automatically during the boot process or at least have a little script or something which I can use after booting so that I don't have to manually plug the device off and on. Please note that I'm a total noob. If you don't mind please tell me the procedure step by step. Also, if I need to get some information via the terminal I'd need to be told the precise command to get it.

    Read the article

  • how do i run teamviewer in a headless system?

    - by Serge
    im really new to ubuntu 12.04 and ive been trying to get remote desktop services between me and my server. and i dont have any spare monitors, keyboards, or mice. i did connect said items too the server and got teamviewer running and connected. but i cant use those components every time i want to go remote desktop. i have ssh but i want a GUI on hand for annoying stressful situations. i read somewhere that ubuntu doesnt start a gui if there is no monitor connected. and tried those xorg.conf setups to no avail. i believe this is the reason why my headlesds setup isnt working. how can i get my GUI to startup while headless?

    Read the article

  • Battery management doesn't recognize removal of power supply

    - by Jason
    I have a Lenovo Y460p running Ubuntu 12.04 (64-bit). The battery does charge normally, but unplugging the power supply only very briefly shows the correct battery indicator. After about 1 second, it reverts to the charging indicator. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My problem is almost exactly like the one in this post: Ubuntu 11.10 power management does not recognize removal of power supply The only exception is that my system does not dual-boot with Windows. This is Ubuntu only. The computer in the other post is a Lenovo as well; not sure if that has anything to do with it. Any help would be greatly appreciated. Thanks.

    Read the article

  • Ubuntu 12.04 Problem connecting Internet by Mobile Broadband through LG GU220

    - by arnab.b
    I am using Ubuntu 12.04. I use my LG cellphone titled GU220 using Aircel connection .. The phone gets connected as an USB device well enough bt the network always fails to connect whenever I try to connect through mobile broadband.. I also have Windows 7 which does not fails to connect the network through PC Suite. tried it several times even after restarting both phone and Ubuntu bt in vain. Also fr 1st two days things worked well and the network was well connected, the problem started just after those two days-in from the next login..

    Read the article

  • Is this a DNS or server-side error?

    - by joshlfisher
    I am having difficulty accessing a specific website. (I get 500 Server fault errors) I can access this site on my iPhone when NOT connected to WiFi. I CANNOT access the site when connected to WiFi or via a Ethernet connection to my home network. I thought it might be a DNS issue, so I copied the DNSservers from a friend who has a different ISP, and has no problem access the site. No luck. Also tried some of the public DNS servers out there, again, with no luck. Does anyone have any idea on how to trace this issue?

    Read the article

  • How to design application for scaling the application?

    - by Muhammad
    I have one application which handles hardware events connected on the same computer's PCIe slots. The maximum number of PCIe slots on motherboard are two. I have utilized both slots. Now for scaling the application I need either more PCIe slots in same computer or I use another computer. So consider I am using another computer with same application and hardware connected on the PCIe Slots. Now my problem is that I want to design application over it which can access both computers hardware devices and does the process on it. The processed data should be send back to the respective PC's hardware. Please refer the attached diagram for expansion.

    Read the article

  • Has RFC2324 been implemented?

    - by anthony-arnold
    I know RFC2324 was an April Fools joke. However, it seems pretty well thought out, and after reading it I figured it wouldn't be out of the question to design an automated coffee machine that used this extension to HTTP. We programmers love to reference this RFC when arguing web standards ("418 I'm a Teapot lolz!") but the joke's kind of on us. Ubiquitous computing research assumes that network-connected coffee machines are probably going to be quite common in the future, along with Internet-connected fruit and just about everything else. Has anyone actually implemented a coffee machine that is controlled via HTCPCP? Not necessarily commercial, but hacked together in a garage, maybe? I'm not talking about just a web server that responds to HTCPCP requests; I mean a real coffee machine that actually makes coffee. I haven't seen an example of that.

    Read the article

  • What is needed for a networked home printer?

    - by Jay
    I've seen this question: Home network printer recommendations but I think I'm asking something more basic. I'm not really familiar with networked printers or how they work or what they do really. What I'd like is to have a printer that is accessible to anyone connected to my home network, without having to plug into the printer itself. An alternative setup might to be to have a printer that is always hooked up to one computer, like a desktop, that is almost always on and allows other computers connected on the network to print to it as well. I believe the first option is called a networked printer and the second is printer sharing. But again I'm new to this so I don't really know the details or if I'm using the correct terminology. I was wondering if someone might be able to shed some light on this and let me know what is needed for either of these setup. Thanks.

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >