Search Results

Search found 12038 results on 482 pages for 'controller actions'.

Page 34/482 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • RAID1 Hard drives with Intel Controller

    - by Dave_H
    I have an older server with 2 35GB hard drives arranged as a RAID-1 drive. I have 3 open bays, I'd like to add 2 more hard drives to the open bays and have all 4 drives configured as a RAID-1 drive that Windows sees as 1 larger drive. Is this possible? If not, the new drives are 2x as big as the old drives, is it possible to replace 1 of the old drives and rebuild then replace the second drive and rebuild and somehow expand the array to use all of the available space? The server is using an Intel hardware raid controller, the software interface is Intel Storage Console v2.12.

    Read the article

  • Cannot create a new domain in an existing active directory forest

    - by Mackenzie Carr
    I have a domain controller setup on Windows Server 2008 R2 (Forest) and I have another Windows Server 2008 R2 (New Domain) and I want to create a new domain in an existing forest. I get the following error: An Active Directory domain controller for the domain mackdev.mackenziecarr.com could not be contacted The error was "no records found for the given DNS query" The query was for the SRV record for: _ldap._tcp.dc._msdcs.mackdev.mackenziecarr.com I've seem to have tried everything even tried adding this record to the DNS server of the primary forest. I even successfully joined this server to the domain without any issues but trying to create a new domain under the existing forest is no luck. The primary forest I.P. address is 192.168.2.20 the server that I am using to try to make a child domain is 192.168.2.21 My ipconfig are as follows: I.P. Address: 192.168.2.21 Subnetmask: 255.255.255.0 Gateway: 192.168.2.1 Primary DNS: 192.168.2.20

    Read the article

  • Different block sizes for partition and underlying logical disk on HP Raid Controller (Linux)

    - by Wawrzek
    Following links collected in this thread I started to check blockdev and found the following output indicating different sizes for partition c0d9p1 and the underlying device (c0d9): [root@machine ~]# blockdev --report /dev/cciss/c0d9 RO RA SSZ BSZ StartSec Size Device rw 256 512 4096 0 3906963632 /dev/cciss/c0d9 [root@machine ~]# blockdev --report /dev/cciss/c0d9p1 RO RA SSZ BSZ StartSec Size Device rw 256 512 2048 1 3906959039 /dev/cciss/c0d9p1 We have a lot of small files, so yes the block size is smaller than normal. The device is a logical driver on an HP P410 raid controller, simple disk without any raid - RAID 0 on one disk to be precise. (Please note that above configuration is a feature not a bug). Therefore, I have the following questions. Can the above discrepancy in the block size affect disk performance? Can I control the block size using hpacucli?

    Read the article

  • Help replacing old Windows 2003 SBS DC with a Win2008 Standard Edition DC

    - by Chris
    Objective: Trying to replace a Windows 2003 SBS domain controller with a windows server 2008 Standard Edition Domain Controller. What I did: used ADPREP. Then all user accounts and OUs are successfully replicated into the 2008 server. I have also managed to transfer all the DC roles (operations master,schema,pdc) into the Server 2008. I have also used NETDOM QUERY FSMO . It displayed that all the roles transferred to the 2008 server. Problem: When I am trying to demote the windows 2003 SBS server using DCPROMO, the message is “No other Active Directory for this domain can be contacted”. I also tried shutting down the 2003 server. Users can login into the domain but they have trouble finding SHARED folders. Can someone help me find out what I did wrong ? Need a little push in the right direction here. Thank you very much ?

    Read the article

  • ML 350 additional SATA RAID controller (mirror only)

    - by Nicholas
    I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up (for non backed up, non-critical, temporary storage). I had planned to just add a 2TB SATA disk and plug it into the motherboard. However I it occurred to me the motherboard might have built-in mirror RAID support? Therefore I could use two SATA disks and have some semblance of redundancy. Is this possible? Or would I need to get a cheap raid card? Any recommendations?

    Read the article

  • IIS Seems to Forward Domain/IP to Domain Controller

    - by asinc
    We have a server (Server 1) with Win 2008 that is accessible by RDP and also is set as the primary DNS IP for a domain (example.com). This server is on the same network as an SBS 2008 server (Server 2) which is the domain controller and internal Dns server. Web requests going to example.com with IP of Server 1 are being passed to Server 2 and served up by IIS from Server 2. What causes this to happen? Is there a safe way to have Server 1 IIS handle the web requests which was our expected outcome? Example: DNS entry on ISP: example.com = 111.111.111.111 Server 1 = 111.111.111.111 Server 2 = 111.111.111.112 Web user goes to example.com in browser, and the page is actually returned from 111.111.111.112?

    Read the article

  • RAID across SAS controller ports

    - by BlueGene
    Hi, I'm managing a HP DL360 G5 machine. It has a SAS controller with two ports. Port 1 is attached to 4 drive bays and Port 2 has 2 bays. The machine currently has 3 drives connected to Port 1 with RAID 5 configuration. I'm trying to max out the bays by adding 1 disk in port 1 and 2 in port 2. Can I group those three disks(1 disk-port, 2 disks-port 2) in a RAID 5 configuration?

    Read the article

  • How to get two seperate remote domain controllers with same IP to work?

    - by Mr. Mister
    Hi, I have a VPN setup between multiple locations. Between each location and the central point (me), is a trust between our domain controllers. It all works great.. A new location wants to join, but their AD controller is using an IP address that is already in use by another AD in a separate location. Neither locations can change their IP addresses, but apparently there is a NAT rule that could be used to allow communication between each AD controller? The central site has a Cisco 5510 firewall which could perform the NAT, but I am unsure of the logic behind the NAT rule. Is anyone able to explain or help out? Thanks.

    Read the article

  • Should USB controller drivers be updated?

    - by Coldblackice
    Should USB controller drivers be updated? In Windows 7, many of the core system devices/buses/controllers still use stock Microsoft drivers dating back to 2006 -- things such as USB controllers and the PCI bus (and subsequent devices in the tree). Should these be getting updated? I would think that surely there would have been improvements/fixes/updates to some or any of these drivers by now, now over 7 years old. Does Windows know "best" in this case, updating these respective drivers when it's needed, or should the user be keeping an eye out for drivers in this "vein" of devices (meaning integrated/core/non-pluggable system devices that are built into the motherboard)?

    Read the article

  • Same SCSI drive appears multiple times on the controller list

    - by ohad
    Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

    Read the article

  • Password Expired Server 2008 R2

    - by Shaharyar
    Hello everybody, We're facing some trouble with our Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

    Read the article

  • Samba Server as domain controller

    - by garden air
    I am using centos 6.2 on my system. I want to make samba server as PDC to join the clients computers operating systems i.e xp,windows 7 and share their files & directories.Currently I have 200 PC running both windows xp and win 7. The question I want to as is does samba 3.5.10 has a capacity to join 200 computers as a domain controller & authenticate the users ? thanks garden Thanks for your guidence.Well at the moment I am using CentOS 6.2 and samba is installed using yum command. It is amazing that I can join samba as a domain comtroller of 200 clients machines. By the way what is samba maximum limit for joining number of clients PC's.

    Read the article

  • Password Expired on Server 2008 R2

    - by Shaharyar
    Hello everybody, We're facing some trouble with our Windows Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

    Read the article

  • Windows 7 PC refuses to join domain

    - by Alex
    So, we're wiping clean all PCs at our office and migrating them to a new server cluster and a new domain. Last night I tested on PC and it mostly worked except it refuses to join to the domain. Now, our domain is named like EXAMPLE.COM. When I just type EXAMPLE the PC can't find the domain controller, even though I can ping it find. If I type EXAMPLE.COM it seems to work. How can I get it to work with just EXAMPLE? That's how I got all the new servers int he cluster to work (about 20 of them) and I haven't had any issues... The only difference between the Windows 7 PC(s) and the servers is that the clients will be on a 10.0.3.X network where as the servers are on a 10.0.1.X network. Oh, the domain controller and all the other servers are Windows Server 2008 R2. Suggestions will be highly appreciated!

    Read the article

  • Is SATA bandwith per Port or per Controller?

    - by instanceofTom
    I always assumed that it was per Controller channel, and that If I have 4xSATA 3.0Gb/s ports on my Motherboard then I should have a potential 12.0Gb/s of bandwith. However, after doing some searching I found conflicting information suggesting that if I had 4xSATA drives connected to my MB and were using them simultaneously each drive would get only 3.0Gb/s /4 = 768 Mb/s max bandwith. So I wanted to clear up my understanding. Side question: Are there other hdd/ssd bandwith bottlenecks to be aware of? (Links to already answered questions are more than welcome)

    Read the article

  • Expanding RAID 1 array size (Adaptec 1420SA controller)

    - by cincura.net
    I have an Adaptec 1420SA controller in server and RAID 1 array created. The old disks slowly started to report S.M.A.R.T errors so I replaced first one, rebuild array and then other one and rebuild the array again. But the new drives are bigger, so I'd like to expand the array to use full disk capacity. Is it somehow possible? In the Adaptec configuration utility, after POST, I didn't found anything that could do it. I still have the old drives, if it helps. The array is used for system (Windows 2008 R2 SP1) booting. Thanks.

    Read the article

  • Pendrive not working on USB port - USB2 Enhanced Host Controller - 27CC

    - by user1664417
    I have a situation here, is kind of weird. Situation as below: If i enable the 'Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC' , then my pc will not be able to read any USB stick/pendrive, but usb port work fine with keyboard and mouse. If I disable the device driver, then all kind of pendrive can be read. Below is What i have done : 1) try the same pendrive on other pc, it work like charm. 2) try others pendrive on issue pc, same problem, but it work fine in others pc. 3) try all the port, including the port that connected to mouse n keyboard. 4) update the driver version. 5) restore default setting of usb in bios Please help to solve these issue if anyone experience it before. Many thanks.. :

    Read the article

  • Updating windows xp hard drive controller from ubuntu live disk

    - by Joel
    The problem: When booting, I get a blue screen shortly after the Windows XP logo splash screen. The error code is 7b, and the second hex number is 0xC0000034. Based on this link (item 7) it appears the driver should be updated. Oddly, I made no changes to the drivers recently. I suspect it was something in a windows update or the newest upgrade of my antivirus (eset). But I digress. The BSOD makes me unable to boot into Windows at all, so I can't update the driver from there. I've run various bios-level diagnostics (including full surface scan) and the hd looks good. I'm also able to boot to an old ubuntu disk and read files from the hd. The question: Based on the above, it appears that I need to update the Windows hard drive controller from the ubuntu live disk. How do I do that?

    Read the article

  • Sound card issues (High Definition Audio Controller)

    - by Prakash R
    I have a 5-year-old Acer Aspire 4520. Until a month back it was working beautifully on Windows 7 32bit. But then out of the blue, the sound stopped working. I've tried reinstalling the OS 3-4 times. The sound came back a couple of times, but it stopped working after a reboot. Even after installing the sound drivers, I don't see any entry in the Playback tab of the Sound applet in Control Panel. I see a High Definition Audio Controller entry in Device Manager. I disabled and uninstalled it, but Windows reinstalls it automatically. I'll share specific hardware details if anybody here needs to know. The processor is "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55". Any help would be appreciated.

    Read the article

  • How can i use one Domain Controller to manage 3 separate small firms

    - by Plamen Jordanov
    currently we have one Domain Controller that have 15 users and cup off services(hMailServer, IIS, DNS, Active Directory). Now the owners of the firm created two new firms which computers and networks are my responsibility. Now i wonder how exactly to join users in existing domain. Did you think that is a good idea to just include all computers and user from all firms under one domain or there is another solution ? Did some of you run into this kind of situation and what did you do ? ---Edit--- Brent, Dan thank for info guys. For now i will follow Brent advice until we get the new server witch we will virtualize and the old server will be our second DC on different location. Heck we even might think some Pay-as-you-go VPS solution for DC redundancy.

    Read the article

  • Introducing a Windows Domain Controller into an all mac-client network

    - by Anon
    A company is about to hire me to be their I.T. Admin. (They currently have no Admin). In the interview, they stated one of the things they want me to do is put in a MS Domain Controller. The thing is, they are a graphic design company with about 100 Mac Clients and maybe 5 Windows Clients. So other than login-credentials and network shares, what is the benefit of this? Should I just tell them to use the OSX equivalent of AD? How hard is it to learn whatever OSX's AD is?

    Read the article

  • PCI IDE Controller

    - by mercutio
    I have a suspicion that the onboard IDE controllers may not be working. Every disk I use to setup this machine reports as damaged (using a win xp installation to test, since it gets to partition setup fastest) So, I popped an IDE PCI Controller card in, to test with, but no drives are showing up in the bios now. I went into setup and changed the BIOS settings to disable onboard IDE1 and 2 to test, but still didn't detect the drives. How do I get that working? It's a standard PC with a 160GB disk and DVD Drive on master and slave channels on a single cable, if that helps. Let me know what else I need to state.

    Read the article

  • Missing Driver - Video Controller (VGA Compatible)

    - by arahant
    I have a HP 2000-2106TU Notebook PC running Windows XP. I want to get the brightness keys to work. They are placed over the F2 and F3 buttons and are meant to be used in conjunction with the Fn key. But these combinations do not work, though other Fn keys such as the volume control keys do. I see a missing driver for a device called Video Controller (VGA Compatible) in the Windows Device Manager. The hardware id is PCI VEN 8086 DEV 0106 SUBSYS_1858103C which a Google search suggests is in an Intel HD Graphics family, but I don't know where to locate the driver. HP's driver scan does not help, as it does not show any missing driver related to video/graphics. What can I do next?

    Read the article

  • Server spec for a small business [duplicate]

    - by I'll-Be-Back
    This question already has an answer here: Can you help me with my capacity planning? 2 answers I will need to buy a decent server for Windows Server 2012 and Linux for Web server (Internal use only - Intranet). I will install ESXi with 2 or 3 VM's. There will be about 80-100 Agents at work, they will login (domain controller) on client PC in the morning (between 9:40am to 10:05am). They can only use IE browser and everything else will be locked. They will not have any storage space, no email, etc. Is this spec decent enough? 2u Supermicro 825 chassis, X9SCL-F x1 Intel E3-1290v2 16Gb DDR3 x2 Intel 520 Series 240Gb x2 2Tb Seagate Barracuda, LSi 4 port SAS raid controller

    Read the article

  • just can't get a controller to work

    - by Asaf
    I try to get into mysite/user so that application/classes/controller/user.php should be working, now this is my file tree: code of controller/user.php: <?php defined('SYSPATH') OR die('No direct access allowed.'); class Controller_User extends Controller_Default { public $template = 'user'; function action_index() { //$view = View::factory('user'); //$view->render(TRUE); $this->template->message = 'hello, world!'; } } ?> code of controller/default.php: <?php defined('SYSPATH') OR die('No direct access allowed.'); class Controller_default extends Controller_Template { } bootstrap.php: <?php defined('SYSPATH') or die('No direct script access.'); //-- Environment setup -------------------------------------------------------- /** * Set the default time zone. * * @see http://kohanaframework.org/guide/using.configuration * @see http://php.net/timezones */ date_default_timezone_set('America/Chicago'); /** * Set the default locale. * * @see http://kohanaframework.org/guide/using.configuration * @see http://php.net/setlocale */ setlocale(LC_ALL, 'en_US.utf-8'); /** * Enable the Kohana auto-loader. * * @see http://kohanaframework.org/guide/using.autoloading * @see http://php.net/spl_autoload_register */ spl_autoload_register(array('Kohana', 'auto_load')); /** * Enable the Kohana auto-loader for unserialization. * * @see http://php.net/spl_autoload_call * @see http://php.net/manual/var.configuration.php#unserialize-callback-func */ ini_set('unserialize_callback_func', 'spl_autoload_call'); //-- Configuration and initialization ----------------------------------------- /** * Initialize Kohana, setting the default options. * * The following options are available: * * - string base_url path, and optionally domain, of your application NULL * - string index_file name of your index file, usually "index.php" index.php * - string charset internal character set used for input and output utf-8 * - string cache_dir set the internal cache directory APPPATH/cache * - boolean errors enable or disable error handling TRUE * - boolean profile enable or disable internal profiling TRUE * - boolean caching enable or disable internal caching FALSE */ Kohana::init(array( 'base_url' => '/mysite/', 'index_file' => FALSE, )); /** * Attach the file write to logging. Multiple writers are supported. */ Kohana::$log->attach(new Kohana_Log_File(APPPATH.'logs')); /** * Attach a file reader to config. Multiple readers are supported. */ Kohana::$config->attach(new Kohana_Config_File); /** * Enable modules. Modules are referenced by a relative or absolute path. */ Kohana::modules(array( 'auth' => MODPATH.'auth', // Basic authentication 'cache' => MODPATH.'cache', // Caching with multiple backends 'codebench' => MODPATH.'codebench', // Benchmarking tool 'database' => MODPATH.'database', // Database access 'image' => MODPATH.'image', // Image manipulation 'orm' => MODPATH.'orm', // Object Relationship Mapping 'pagination' => MODPATH.'pagination', // Paging of results 'userguide' => MODPATH.'userguide', // User guide and API documentation )); /** * Set the routes. Each route must have a minimum of a name, a URI and a set of * defaults for the URI. */ Route::set('default', '(<controller>(/<action>(/<id>)))') ->defaults(array( 'controller' => 'welcome', 'action' => 'index', )); /** * Execute the main request. A source of the URI can be passed, eg: $_SERVER['PATH_INFO']. * If no source is specified, the URI will be automatically detected. */ echo Request::instance() ->execute() ->send_headers() ->response; ?> .htaccess: RewriteEngine On RewriteBase /mysite/ RewriteRule ^(application|modules|system) - [F,L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .* index.php/$0 [PT,L] Trying to go to http://localhost/ makes the "hello world" page, from the welcome.php Trying to go to http://localhost/mysite/user give me this: The requested URL /mysite/user was not found on this server.

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >