Search Results

Search found 1664 results on 67 pages for 'cory house'.

Page 34/67 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Iptables mark incoming packet - vpn routing

  - by Tom

  I have connected my home to my workplace for out of house backup reasons through openvpn. The connection is working nicely. At work I have 5 fixed IP addresses. Now I would like to assign one of these IP addresses to be forwarded to my home machine. I have confirmed packet arrival at my home machine with tcpdump. The problem is that my default route at home is NOT the tun0 (naturally), but eth0 to my own ISP. So I created a separate routing table to route my tun0 packets back to where they belong, but do not how to mark the incoming packet which arrive through tun0 with iptables, so I can drive them back. I do not want any port restrictions, but only what comes from tun0 should leave through tun0 thanks tom

  Read the article

• Multiple SSIDs better or worse

  - by swiss196

  I'm just setting up a network in a student house with 10 rooms, 3 floors. Configuration at the moment is as follows: Virgin Media 100mb Cable Virgin SuperHub on ground floor broadcasting on SSID1 Second AP(Edimax) wired on middle floor broadcasting on SSID2 These two networks server all 3 floors fairly well but I was wondering whether it would be better to setup an individual SSID for each floor (both the routers allow me to configure up to 3 ssids on each!). Would this help with speed issues, i.e if someone on the top floor is downloading/streaming etc, this wouldn't affect someone on the middle floor on a different SSID Or, will it have no effect? Thanks, Dave

  Read the article

• stunnel: SSL-to-SSL? (for smtp/imap)

  - by nonot1

  Hello, How can I configure stunnel to accpet SSL connections, and connect then to an SSL port on a different server? Here is my setup: Our ISP's server, "Mail Server", supports smtp/imap over SSL. (Not starttls. Just over ssl.) But, I have a bunch of client machines that will only trust a specific, internal, root certificate. Thus, they can not connect to "Mail Server". For these client machines, I'd like to make a dedicated "Mail Tunnel" host that uses stunnel to listen with an in-house signed SSL certificate, and just forward data to "Mail Server" using a 2nd SSL connection. Can this be done? What would be the specific steps for Ubuntu Server 10.10? (I'm not too familiar with persistent service configuration.) Thank you

  Read the article

• Weird (?) issue with Exchange Forwarding

  - by abszero

  Hello everyone. Here is the long and short of it: the company I work for was purchased by another company who uses Gmail for domains as their email provider. We use an in house Exchange box. No big deal, I dropped into Active Directoy and created several Contact objects that represented our new email addresses at Gmail. I then went through each employees record and have their mail set to forward to this new address and not deliver locally. So I am forwarding email for me@domain1 to me@domain2 and this works great as long as I don't send an email from me@domain2 to me@domain1. If I log into my personal Gmail account and send an email to me@domain1 the email is properly forwarded to me@domain2. The mail coming from me@domain2 to me@domain1 seems to just get lost in the ether. Have I done something wrong or is this a quark with Exchange? Thanks!

  Read the article

• This is probably a horrible idea; putting a Mac Mini in a mini-fridge [closed]

  - by Christian A. Strømmen

  Possible Duplicate: Putting servers inside a refrigerator? Just moved to a new house and had to place my Mac Mini server in the attic. Now this is really nice and cool at this time of the year, but during summer it's going to get blistering hot up there, meaning I have to find a solution that won't kill my Mac Mini and the two WD external drives I have connected to it. Is there any good reason why I couldn't just buy a mini-fridge and put them inside that? The only thing I can think of is condensation building up, but I have no idea if that will be an issue or not. Something like this. And yes, I'm pretty sure this is a terrible idea, but I figured it was worth mentioning here and getting some feedback. What other options are there?

  Read the article

• How to scale out OpenStreetMap data efficiently

  - by Pierre

  For over a year now, I'm running an in-house PostGIS server filled with OSM data, used for both Mapnik-based tile generation and Nominatim-based geocoding, updated with day replicates. This works pretty well. However, as usage is growing exponentially, I would like to achieve better reliability and performance by adding additional PostgreSQL servers. And I'm kind of lost. Since PostgreSQL doesn't seem to handle replication by itself, I would think about using a piede of middleware like PgPool-II to keep the servers in sync. But I'm afraid it would be nothing but necessary for this usage : very high read-to-write ratio, where all writes are done at the same exact time every day. My questions are simple : What would you do to keep these servers in sync? And, what is done for this at the OpenStreetMap Foundation, MapQuest, Mapbox or CloudMade? Thanks.

  Read the article

• Is there a performance difference between Cat5 and Cat6 keystone blocks?

  - by Scott Anderson

  I'm going to be wiring my home for ethernet soon, and I've already decided that I want to use Cat6 cable to do it (faster speeds, better performance, etc). During the installation, I'd like to add wall-plates to certain rooms in my house, and the keystone blocks look like the best option for me. My question is: I've seen different keystone blocks on many cabling websites, some say Cat5e and some say Cat6. The Cat6 ones are slightly more expensive. Is there any noticeable performance gain from using a Cat6 keystone? To me, it just seems like the keystone really wouldn't matter, since it's basically like putting an RJ-45 end on a cable. Can I buy the cheaper Cat5e keystone blocks and still have the performance that Cat6 cable will give me? Thanks!

  Read the article

• What is the advantage of iSCSI over SMB?

  - by sofakng

  At my house I'm running a Hyper-V server with a Windows Server 2008 R2 VM acting as a file server. Files are shared across my network using SMB. (Also, the machine is using a PERC 6/i RAID card but I don't think that's important) I'm thinking about setting up a dedicated SAN (iSCSI) machine and then switching my Hyper-V server to ESXi. What are the advantages of using iSCSI versus SMB? I think I would still need a file server OS (eg. Win 2k8) sharing files via SMB so I'm not sure the end result would be any different than my current setup...

  Read the article

• capture nimbuzz traffic

  - by lurscher

  I need to capture all the traffic, specially during login, between nimbuzz pc client and nimbuzz server. The reason is that i need to debug outgoing packets at login that mark the user visibility status in order to reproduce them in a in-house XMPP client application I've tried doing this with wireshark, but i seem to be pretty helpless with this tool. Also, the packets i've been able to see are all before the SASL negotiation happens, after that, i cannot see the xml packets being exchanged any help for how to achieve this task is greatly appreciated (preferably on Windows, since there is no nimbuzz client for linux, in any case i can install one in a VM and monitor the traffic between the VM instance in the linux host)

  Read the article

• pinx 501 with print server - 10 licenses

  - by ra170

  I have pix 501 with only 10 licenses. I'm already approaching this limit, running 2 computers at home, 2 laptops, PS3, iphones, 2 web cams..not everthing is on all the time, but it's possible as I'm looking into adding a print server, so that I can print from anywhere in the house. So my question is, will the print server count as a connection towards the license? I think it will need default gateway, which in this case will be my pix 501. I've seen somewhere on some othee board saying, don't set default gateway in the print server to pix 501, but then how would that work? is there a work around? I don't need to print from VPN or from outside, just inside..

  Read the article

• new ubuntu server installation - java server not receiving packets

  - by James

  I have developed a Java server which listens for UDP packets which come from mobile devices. At the moment, it works correctly if I run my Server on my windows PC. I can receive and respond to the UDP packets sent from my phone (over 3g, not wifi). However, I am trying to run the Server on a different computer which I found lying around my house. I have basically done a clean install of Ubuntu Server edition, updated it, installed the java run time environment and configured port forwarding to allow connections on the appropriate port. I have also tried to disable the firewall. The problem is, it doesn't appear as if the server is receiving any packets and I've exhausted my brain thinking on how to solve/debug the problem. Can anyone suggest to me what the problem might be? or more likely something I can do to help me find out more information about what is going wrong.

  Read the article

• Why does my wifi fail to stay connected?

  - by Mark0978

  We have 5 different laptops in the house, 1 macbook, 1 Compaq, 3 dells, plus numerous little devices like ipods, squeezeboxs, squeezebox radios and controllers, you name it. All of them connect to and stay connected to the "downstairs" WIFI just fine. But my laptop (the most expensive of the lot) refuses to stay connected, preferring the much weaker and slower signal upstairs. My laptop is running Win7 (64 bit) Ultimate with an Intel 3945ABG WIFI contoller (It's a Dell Precision M6300). The WIFI Access Point is a Cisco WRT54G2 V1 with firmware: Firmware: DD-WRT v24-sp2 (10/10/09) micro Time: 11:11:10 up 42 min, load average: 0.06, 0.01, 0.00 WAN: Disabled

  Read the article

• Disconnected from WiFi, Windows claims otherwise [closed]

  - by Manu

  I'm connected via wifi to my ISP's router/modem. While Windows says that I'm always connected, I keep getting messages from Netgear Genie that I've lost contact to the Internet, and I cannot access webpages until it comes back. There are two other computers in the house, one connected to the router via ethernet, the other via wifi, both seem to have no such problems. I've wondered if Netgear genie itself was the problem, but I am regularly disconnected even if I uninstall it. And I'd rather have it since it accurently tells me if I'm connected or not. Why does windows says I'm online if I can't access any online game, or website ? I've removed the connection, recreated it, I've even copied the settings to a usb key from the computer that has wifi access. Is there a tool that can tell me which program, if any, is disconecting me ?

  Read the article

• Moving files from Public folder to C: takes a minute, even though they are same hard drive and same

  - by Jian Lin

  I have a big file, like 2GB, and would like to move it from Network -> Bookroom -> Users -> Public (this is the computer in the bookroom in the house) to c:\myfiles and they are actually on the SAME hard drive (and same partition). But copying still takes a minute or so? I thought if on the same hard drive and partition, then it is a "move" and it should take 2, 3 seconds only. that public folder also is \\Bookroom\Users\Public Update: Sorry, I actually mean "move" all the way... so it is not copy but move. So that's why I thought it should take 2, 3 seconds only.

  Read the article

• Why are default spamassassin rules not being applied to emails we generate?

  - by Chance

  My company uses a standalone spam-assassin install to test marketing emails, however, mail originating from us does not seem to run the full gamut of test. For example, Spam assassin has a default rule that flags messages that contain the phrase Dear [Something], and it properly flags spam that I feed it.It does not, however, apply that same rule to in house email I send it. Is it possible that spam assassin has white-listed us somehow, perhaps because the mail originates in the same domain as the server or receiver? I believe most of the recent spamassassin questions have been mine, so thanks for bearing with me as I figure this out! Chance EDIT Details on our SA setup: We are piping the emails into the CL with spamc -R < test_email.eml Identical results testing as root or a user, no user_prefs file

  Read the article

• What is the right way to use Internet Sharing in OS X?

  - by Bob King

  For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

  Read the article

• Windows 8 doesn't automatically join Wi-Fi network if Ethernet connection is active

  - by Herb Caudill

  In Windows 7, my laptop would automatically join both an Ethernet network and the Wi-Fi network in my house (both going through the same router). In Windows 8, if the Ethernet connection is present, it doesn't join the Wi-Fi network at all. The reason I noticed this is that if Wi-Fi isn't active, I don't see my AirPlay speakers. My wireless printer is also unavailable until I manually connect to Wi-Fi. To recap: When I turn on my computer and it's connected to Ethernet, this is what my Network Connections control panel looks like: After I manually join my Wi-Fi network, it looks like this: I would prefer for it to join both networks automatically on startup, the way it did in Windows 7. Is there a way to make this happen?

  Read the article

• Shielded ethernet cable and ethernet sockets earthing how to?

  - by ageis23

  Hi I'm going to install 5 Ethernet sockets in my house using cat5e shielded cable. I decided to use this because the sockets will be on the second floor and the most practical way up is within a trunk along with some mains wiring. The cable will be terminated at the router and at the Ethernet faceplate. What can I use to earth then? The faceplate/router are both plastic hence no earth wire needed. I can't use the earth wire within the main socket can I? I figured it will be very very dangerous. I don't want to be connecting to the earth block on the mains either since I totally incompetent when it comes to mains electricity.

  Read the article

• postfix relay access denied from some IPs

  - by Caballero

  This is driving me nuts. I have Postfix/Dovecot set up on Centos 6 VPS for my emails. I can send and receive emails without any problems on my outlook (home broadband), on my Android phone (3G connection), however when I set up exactly the same email account on Outlook at my friends house I'm getting bouncebacks when I'm trying to send email (receiving works fine): 554 5.7.1 : Relay access denied Now if it wasn't working at all I'd understand, but why is it working on several internet connections, but not everywhere? Can someone shed some light on this? Where should I look for the problem?

  Read the article

• need advice for storing data setup hardware for client with 80TB per year of data footprint increase

  - by dasko

  hi everyone, i currently have a client that will be adding replicated data from satellite locations in the number of approximately 80TB per year. with this said in year 2 we will have 160TB and so on year after year. i want to do some sort of raid 10 or raid 6 setup. i want to keep the servers to approximately 4u high and rack mounted. all suggestions welcome on a replication strategy. we will be wanting to have one instance of the data in house and the other to be co-located (any suggestions on co-locate sites too?). the obvious hardware will be something like a rack mount server with hot swap trays and dual xeon based type processors. the use of the data is for archives of information, files will be made up of small file sizes. i can add or expand to this question if it is too vague. thanks for looking.

  Read the article

• Files turned into folders on external hard drive

  - by Kashif

  I have a networked hard drive where I like to store audio/video/software and all sorts of other files for my house. While the software files are all intact and working, many of my video and audio files have been turned into folders! Can anyone explain why this is happening, how I can prevent it, and if it is possible to revert these "folders" back into files. Thanks much! An example of what the folders are named: "Highschool Graduation.avi", "Birthday party.avi", "Somesong.mp3" The HDD is connected to a Linksys E4200 router (Firmware Version: 2.0.37). This is how the HDD is networked.

  Read the article

• Install wireless router with cable modem - need authentication server?

  - by Paul

  I've bought a wireless router which I'm installing with a Telstra BigPond cable modem for a friend. As part of the setup I've got to a screen requesting username / password / authentication server for the cable modem They have contacted Telstra who supply the username / password and say that is all they need. They dont know anything about an authentication server. There are a couple of answers up on Whirlpool forum found through google but those answers are 4 years old. http://forums.whirlpool.net.au/forum-replies-archive.cfm/475258.html http://forums.whirlpool.net.au/forum-replies-archive.cfm/479615.html I havent tried them yet as I hoped to get actual answers before trundling over to my friends house again. Can anyone suggest, How to get information from Telstra support? (I realise this question maybe impossible to answer) What is the authentication server for Telstra BigPond for a user in Sydney Australia Are those whirlpool forum answers still valid? I guess if I dont get anything more here I'll try what it says on whirlpool and see what happens.

  Read the article

• Issue Connecting two home networks

  - by Alex

  Hi, I have a home networking question. I have two DLINK wireless/wired routers in my house, connected to the Internet ISP. There are a 2 computers on each of the two networks. Network1: has 192.168.0.0 (gateway) Valid IP'S range - 192.168.0.1 - 192.168.0.10, with COMP1 having a fixed IP of 162.168.0.1 Network2: has 192.168.0.100 (gateway) Valid IP'S range - 192.168.0.101 - 192.168.0.110 with COMP2 having a static IP of 162.168.0.101, a WIRELESS printer on 192.168.0.102 Both routers have a netmask of 255.255.255.0 My need is to connect the two routers, so that I can Remote desktop for COMP1 to COMP2 and viceversa, and COMP1 to connect to the wireless printer on Network2. can anyone help to set this up so that the both networks can talk to each other. Any help is appreciated. -Alex

  Read the article

• LAN connection suddenly domain_not_set.invalid

  - by Liam Coates

  I went to work today - internet fine as always. Came back, dreaded yellow triangle. I can connect wirelessly like i am now on my tablet. Thats completely fine. But through LAN I get the domain_not_set.Invalid message if I renew my IP for example. It seems I just don't have a DNS. But I have literally not touched anything no ones even been in the house. Hows that happen? Any help on why only wireless works would be great, I am gonna buy a wireless adapter tomorrow for the interim but I would like to know why. Thanks.

  Read the article

• Terrible Performance with SATA Drives on Dell PowerEdge, steps to troubleshoot?

  - by Tom

  I had asked this question earlier and the question went missing so here it is again. Bought a DELL Poweredge 2950 to use as in-house QA Server. Disk performance is beyond terrible, 1000-4000 ms response time on the drive with our SQL Server database .mdf. Sql Server disk queue upwards of 300 at times. I'm a software guy, can anyone help me with steps to determine the issue? I don't know what RAID controller it has, how can I determine that? I'm speculating it could be BIOS issue. Perhaps the server used to have another kind of drive in it and when I added SATA the ??? buffer size is wrong??? Perhaps I chose wrong options (chose defaults) when setting up the RAID 1 arrays? I thought RAID 1 was a performance array?

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >