Search Results

Search found 16174 results on 647 pages for 'disk space'.

Page 34/647 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Is my disk hot or not?

  - by adriangrigore

  I am trying to figure out the temperature of my dedicated server's harddisk. For this purpose, I've downloaded HDTune to monitor the S.M.A.R.T. Status. The problem is that the current temperature for "C2 Temperature" is 73 degrees celsius, but the little thermometer on top of the window shows 27 degrees celsius. See this screenshot: http://screencast.com/t/OGJhZGIxND Another monitoring software (Anfibia Reactor) shows similar behavior: Disk temperature is around 30 degrees, but it says that the disk is too hot. So, is my disk hot or not? Since this is a dedicated server, I can't just open the case and put a thumb on it.

  Read the article

• continuous hard disk access - slowing down my machine

  - by suresh

  I find from the hard disk access LED on the front of my machine that the hard disk is being accessed more often and probably because of that, my machine is quite slow. The machine becomes unresponsive even when the load as seen from w command is around 1 or so. My desktop is optiplex 360 dell machine running Ubuntu 10.04. My questions are: How to quantify hard disk access and how to see if it is more than "normal" ? If it is more than normal, what are my solutions ? thanks suresh

  Read the article

• How to reload UBUNTU11.04 again which is hidden in the hard disk

  - by Yaskadeva

  I had installed Ubuntu 11.04 as another OS ( not inside Windows). means every time i used to get a Ubuntu screen and i can select Ubuntu or windows. but once i formatted my windows. after that the 38 gb memory which was used under Ubuntu is missing means the ubuntu is there and as it is EXT type windows is not able to access that. and i am not able to boot into it.I need ubuntu i can install new version but my memory is being wasted i do not kno what to do. pl reply me asap.

  Read the article

• Beware of SQL Server and PerfMon differences in disk latency calculation

  - by Michael Zilberstein

  Recently sp_blitz procedure on one of my OLTP servers returned alarming notification about high latency on one of the disks (more than 100ms per IO). Our chief storage guy didn’t understand what I was talking about – according to his measures, average latency is only about 15ms. In order to investigate the issue, I’ve recorded 2 snapshots of sys.dm_io_virtual_file_stats and calculated latency per read and write separately. Results appeared to be even more alarming: while for read average latency...(read more)

  Read the article

• Recover files from NTFS drive with bad sectors

  - by Martin

  A few nights ago I have created a backup of my data on an external 500 GB NTFS USB hard drive. I have then formatted my computer, reinstalled Ubuntu and started transferring back the data from the external HDD. Unfortunately some files have became corrupted and Ubuntu is unable to copy them over. The same issue happens if I login using Windows 7. Disk Utility detects with SMART that there are "a few bad sectors". Some of files are perfectly intact, but other files cannot be accessed (nor read, copied...) although they are displayed within nautilus and show the correct file size. Is there anything I can do to recover this data? I have thought of using TestDisk but this utility seems more useful for repairing lost partitions or deleted files. I have also thought of using ddrescue so I could at least have a low level copy of the disk but I am not sure what use to make of it in order to recover the data!!!

  Read the article

• Windows XP SP3 TCP/IP No buffer space available

  - by Natalia

  I have the exactly same problem as here: Windows XP TCP/IP No buffer space available On Windows XP Pro, SP3 if one does an experiment where one tries to open TCP/IP sockets in a loop (bascially, listen port 7000, listen port 7001, etc.) After approx 649 open sockets, one will start getting errors: No buffer space available (maximum connections reached?) I've tried to edit the registry as described here http://smallvoid.com/article/winnt-tcpip-max-limit.html I set MaxUserPort = 65534 and MaxFreeTcbs = 2000, but it didn't help. What else can I do? I need 1000 server sockets. Here is the error stack: 05.04.2012 10:23:57 java.net.SocketException: No buffer space available (maximum connections reached?): listen at sun.nio.ch.ServerSocketChannelImpl.listen(Native Method) at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:127) at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59) at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:52) at channelserver.NIOAppServer.initSelector(NIOAppServer.java:40) at channelserver.NIOAppServer.(NIOAppServer.java:27) at channelserver.NIOServer.main(NIOServer.java:433) at channelserver.NIOServer.main(NIOServer.java:438)

  Read the article

• Disk names in Solaris 10 for ZFS: SAS WWN instead of c0t0d0

  - by notpeter

  I currently have a server running Solaris 10u9 with a SAS enclosure (Dell PowerVault MD1000) filled with SATA disks attached to an SAS card (LSI 3801E). It happily recognizes the 15 disks in the MD1000 and presents them each disk in the traditional solaris form (c1t12d0, c1t13d0, c1t15d0, etc). My home ZFS setup (Nexenta CP3 + LSI 9200-16E + directly cabled SATA disks) presents disks as their SAS WWN ID (ex: c3t600039300001EA56d0). Although this ID is longer, I've found it much easier to troubleshoot because the cabling/slot is irrelevant, ZFS just identifies the disk by ID, if it's connected it finds it. Most manufacturers print the WWN right on the disk's top label, can't get much easier than that. So how can I get Solaris to identify disks by SAS WWN instead of by the cXtXdX?

  Read the article

• Beeping Hard Disk - Seagate 250GB Momentus 5400.6

  - by Pez Cuckow

  I have been trying to repair a laptop that simply beeps instead of booting. After taking it apart I have now realised that it is the hard disk beeping. I know that sound strange but I guarantee that is what it is! (Currently powered on it's own with a Sata Mains lead). The beeping is slightly faster than one per second there is a link to a recording below: http://www.pezcuckow.com/files/BeepingHardDisk.m4a This recording was made resting the mic on the hard disk while it was sat on a table on it's own, there are no speakers anywhere near, the sound is coming from the hard disk. Does anyone know what this beep means? Is the hard drive just dead, or is it fixable and the data recoverable? Many thanks,

  Read the article

• This Week in Geek History: The Call of Cthulhu, the Columbia Shuttle Disaster, and the Birth of Facebook

  - by Jason Fitzpatrick

  This week in Geek History saw the beginning of the Cthulhu horror mythos, the Columbia space shuttle disaster, and the birth of Facebook. Also, check out our new addition “Other Notable Moments” at the end for more facts and trivia from this week in Geek History. Latest Features How-To Geek ETC How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition Stylebot Customizes Web Pages in Chrome, Now Has Downloadable Styles Blackberry, Dell, Apple, and Motorola Tablets Compared [Infographic] Encrypt Your Google Search Queries Vintage Posters Showcase the History of Tech Advertising Google Cloud Print Extension Lets You Print Doc/PDF/Txt Files from Web Sites Hack a $10 Flashlight into an Ultra-bright Premium One

  Read the article

• Limit disk I/O one program creates?

  - by Posipiet

  Hardware: one virtualization server. Dual Nehalem, 24GB RAM, 2 TB mirrored HD. Software: Debian, KVM, virt-manager on the server with several virtual machines that use Linux too. 2 TB Disk is a big LVM, each VM gets a logical volume and makes its own partitions in that. Problem: One of the programs that runs on one of the VMs creates huge disk load. This never was an issue, because the program never ran on such a powerful hardware. Now the CPUs are fast, and lots of I/O is the result. We cant do much against that at the moment, because the tool is a black box. On the other hand, the speedy computation is welcome. The program creates about 5 GB of temp files which get overwritten during the next iteration. Question: How can we limit the disk I/O for the process?

  Read the article

• SATA hard disk for laptop on Desktop PC

  - by Lawliet

  I know that this forum is for programming-related questions only, but I'm having this dilemma so here I go. Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) Thanks in advance

  Read the article

• bashrc script not accepting space in directory name

  - by faizal

  I have added a variable at the end of my ~/.basrc file : export xyz = /home/faizal/DEV/ADT workspace/xyz But if i open a new terminal, i get the error : bash: export: 'workspace/xyz': not a valid identifier So i try a variety of alternatives : export xyz=/home/faizal/DEV/ADT\ workspace/xyz export xyz="/home/faizal/DEV/ADT workspace/xyz" export xyz="/home/faizal/DEV/ADT\ workspace/xyz" export xyz='/home/faizal/DEV/ADT workspace/xyz' export xyz='/home/faizal/DEV/ADT\ workspace/xyz' They all give me the error when i try cd $xyz: bash: cd: /home/faizal/DEV/ADT: No such file or directory What am i doing wrong?

  Read the article

• How to detect which edges of a rectange touch when they collide in iOS

  - by Mike King

  I'm creating a basic "game" in iOS 4.1. The premise is simple, there is a green rectangle ("disk") that moves/bounces around the screen, and red rectangle ("bump") that is stationary. The user can move the red "bump" by touching another coordinate on the screen, but that's irrelevant to this question. Each rectangle is a UIImageView (I will replace them with some kind of image/icon once I get the mechanics down). I've gotten as far as detecting when the rectangles collide, and I'm able to reverse the direction of the green "disk" on the Y axis if they do. This works well when the green "disk" approaches the red "bump" from top or bottom, it bounces off in the other direction. But when it approaches from the side, the bounce is incorrect; I need to reverse the X direction instead. Here's the timer I setup: - (void)viewDidLoad { xSpeed = 3; ySpeed = -3; gameTimer = [NSTimer scheduledTimerWithTimeInterval:0.05 target:self selector:@selector(mainGameLoop:) userInfo:nil repeats:YES]; [super viewDidLoad]; } Here's the main game loop: - (void) mainGameLoop:(NSTimer *)theTimer { disk.center = CGPointMake(disk.center.x + xSpeed, disk.center.y + ySpeed); // make sure the disk does not travel off the edges of the screen // magic number values based on size of disk's frame // startAnimating causes the image to "pulse" if (disk.center.x < 55 || disk.center.x > 265) { xSpeed = xSpeed * -1; [disk startAnimating]; } if (disk.center.y < 55 || disk.center.y > 360) { ySpeed = ySpeed * -1; [disk startAnimating]; } // check to see if the disk collides with the bump if (CGRectIntersectsRect(disk.frame, bump.frame)) { NSLog(@"Collision detected..."); if (! [disk isAnimating]) { ySpeed = ySpeed * -1; [disk startAnimating]; } } } So my question is: how can I detect whether I need to flip the X speed or the Y speed? ie: how can I calculate which edge of the bump was collided with?

  Read the article

• Using physical disk with VMware Workstation

  - by chx

  I am using VMware Workstation 9.0 under Windows 7 and trying to load my Linux from Physicaldisk0. And it boots, grub sees the two partitions on the disk (I checked in command line) and the kernel and the initrd loads and then it stops saying "device not found"and drops me into an emergency shell. Indeed there is absolutely nothing in /dev not the /sda device it expects not /hda nothing that looks like a disk. Edit: I can boot the Linux disk just fine if I boot it from BIOS and not as a VM. Edit2: The question is, how can I make this setup work?

  Read the article

• Virtual PC lost parent disk for differential vhd

  - by SeeR

  2 years ago I had that brilliant idea to create base Windows XP disk which all of my VM with XP will use. Of course it ended that I had only one VM with XP :-). Today I needed to make some free space on my HDD so I found one not used VM named "Windows XP" which had only 5GB. I deleted it as fast as possible :-) and of course I used shift to not use "Recycle bin". Now when I want to run my XP VM I have following error: "One of the parent hard disks of ... is missing." It's not a problem for me as soon as I can restore files from this differential vhd that I have right now. So: I have differential disk with files I need I don't have parent disk My question is: How can I restore files from this differential hvd?

  Read the article

• Hard Disk Spins Down as long as Battery is in Laptop

  - by Brock Dute

  Hi, I just figured out today that as long as the battery is in my laptop, it doesn't matter if it's fully charged while plugged in, Ubuntu always spins down my hard drive. I noticed this because there was a huge difference in speed when I removed the batteries. My settings for power management is basically: on AC power, don't spin down harddrive, dont suspend or anything on battery power, basically save as much power as possible I assumed that if I plug in my laptop, it'll use the On AC Power settings no matter what but apparently, this isn't so. Is there a way to "fix" this?

  Read the article

• mount old ATA disk to USB adapter

  - by 213441265152351

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic USB-IDE, an ATA adapter to USB 1.0 similar to the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. Any ideas?

  Read the article

• Install Ubuntu on USB + Disk Encryption

  - by snipey

  I want to create an Operating System installed upon a USB instead HDD (4 GB) So I wanted to know if there were any special steps for it or simply choosing usb in installation menu. P.S - I want to do full install and not live boot. And After that I want to encrypt the entire Operating System using TrueCypt , guide already present on their website , I just wanted to know if it would be compatible with this method. THanks :)

  Read the article

• Hidden characters inserted after pipe (|) followed by a space

  - by nifty

  Very often, on my Mac, when I use the pipe (|) character followed by a space character, an invincible character will be inserted in between. This is especially annoying when using the terminal, as it makes commands invalid. If I type the following in iterm2, I often get the following: ls | cat zsh: command not found:  cat If I hit the up-arrow-key to get my previous command, and then remove and reinsert the space between | and cat, the command will work. When I copy paste the working and non working commands into a file, like this: non-working: ls | cat working: ls | cat and open it in Hex Fiend it shows the following: non-working: ls |¬†cat working: ls | cat I've also experienced the same kind of issue in SublimeText2 using the square brackets ([]) followed by a space. So I don't believe its an issue with iTerm2.

  Read the article

• Interview: "Oracle and Sun, Engineering from Applications to Disk"

  John Fowler, executive vice president of systems at Oracle, talks about Oracle's acquisition of Sun and what it means for customers.

  Read the article

• Rail's FileStore with Linux Disk Caching or RAMdisk?

  - by Yo Ludke

  I have a Ruby on Rails application that stores it's catched files on the filesystem (Rails file-system cache). I was thinking about changing to memcached Store, but a short test shows it isn't a big difference in speed. From linuxatemyram.com I learned a bit about file caching. On the current machine there would be around 40..45GB RAM left which isn't needed for the application and which can be used to linux-disk-cache this rails file cache store. The disk is a RAID10 system with almost 120MB disk perfomance. How can I tell Linux to use free RAM more deliberately and not to be shy about using it? Do think it's necessary to adjust a sysyctl/.. value here, or would I have performance advantages to put the File Store root diretory on a ramdisk? (Loosing the cache during a reboot wouldn't be a problem)

  Read the article

• Looking for a disk manager that has options for setting allocation sizes in paritions

  - by mango

  I'm looking for a GUI program that is compatible with Ubuntu 13.10 - Server X86-64 that has all the features of Gparted but also allows for setting custom allocation sizes when creating a partition. Eg: Ability to create a 4gb Fat32 parition with 32 kilobyte allocation size. Please don't suggest a terminal only application, no matter how awesome it might be, because that's not what I asked. Wow, I come off like a right up prick when I write, eh?

  Read the article

• Programs keep waiting for external disk to spin up - how to ignore disk?

  - by Andrew J. Brehm

  Like many Mac users I have an external Firewire disk hooked up to my Mac to be used by Time Machine. This works very well, backup-wise. The problem is that very often when I use a Mac application and try to open a file, the file selection dialogue window hangs until the external disk has spun up. I never ever want to open a file on the external disk. Sometimes this happens even when I just want to save a file I already saved (i.e. type something and press meta-s). Is there anything I can do about this?

  Read the article

• Location of development solutions on disk - Common or upto the individual

  - by dreza

  In our team meeting today a senior member brought up the proposal that we should be having a common location/structure for our development solutions. A couple of his points were: Making it common meant when talking about projects and emailing stuff everyone is on the same wavelength and knows where to look. If there is ever the need to hard code a location path then it will work across all developers pc's. He had a more few points to back up his suggestion but I unfortunately got distracted during the discussion and so didn't hear all of them. I have no issue with the idea and can see it's merits but I was wondering if it is common or even recommended that all developers place their code in the same folder structure. Or do developers like to have the flexibility of location solutions where-ever they want? We currently use SVN for our version control. In this case his recommendation was to place all code in: c:\Work\Development\<Customer>\<project>\Code\<solution>\ the code I guess actual path is irrelevant for this question but added for completeness.

  Read the article

• High disk time on sql-server

  - by Patrik

  Hi We have a dedicated sql-server 2008 r2 enterprise edition. The setup is: D: (data files) - stored on local ssd disks (not the same disks as log files) (raid 10) E: (log files) - stored on local ssd disks (not the same disks as data files) (raid 1) F: (transaction log backup) - stored remote on a SAN Today we moved our log files to new disks (from F: to E:). From a shared volume ( F:(SAN)) to dedicated local disks (E:). What then happend was that the "disk time", "avg. transfer time" and "avg disk write queue length" increased on the volume where we have the data files (D:) (not on the volume where the log files are located). The data volume and log volume does not share disks, however they share the same controller card. "Disk idle time" is low for all volumes. One thought is ofcourse that the controller card might be overloaded. But, we need more ideas on where the problem might be.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >