Search Results

Search found 1586 results on 64 pages for 'flemish bee cycle'.

Page 34/64 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Building in Change: Project Construction in Asset Intensive Industries

    - by Sylvie MacKenzie, PMP
    According to a recent survey by the Economist Intelligence Unit, sponsored by Oracle, only 51% of project owners rated themselves as effective at delivering their projects to scope, budget, and schedule when confronted with change. In addition only 43% rated themselves as effective at anticipating potential change. Even with the best processes and technology in place, change is often an unavoidable part of the construction process. How organizations respond to change can mean the difference between delays and cost overruns, and projects being completed on schedule and on budget. Implementing Enterprise Project Portfolio Management and using a solution to help manage and automate those process can help asset intensive organizations: Govern project and program compliance and regulatory requirements for project success Unite project teams and stakeholders through collaboration and strong feedback methods to speed project completion Reduce the risk of cost and schedule overruns and any resulting penalties to deliver on time and on budget Effectively manage change throughout the project life cycle Ensure sufficient capacity, utilization, and availability of people, skills, and other resources to meet commitments. The results of the recent EIU survey, sponsored by Oracle:"Building in Change: Project Construction in Asset-Intensive Industries", will be revealed in an upcoming webinar with Hart Energy / Oil & Gas Investor, featuring the Economist Intelligence Unit and Oracle on April 11th at 1pm CST. Click here for further information or visit http://www.oilandgasinvestor.com/

    Read the article

  • Can defect containment metrics be readily applied at an organizational level when there is only a consistant organizational process framework?

    - by Thomas Owens
    Defect containment metrics, such as total defect containment effectiveness (TDCE) and phase containment effectiveness (PCE), can be used to give a good indicator of the quality of the process. TDCE captures the defects that are captured at some point between requirements and the release of a product into the field, indicating the overall effectiveness of the entire process to find and remove defects. PCE provides more detail at each phase of the software development life cycle and how the defect detection and removal techniques are working. Applying these metrics makes sense at a level where you have a well-defined process and methodology for product development, often a project. However, some organizations provide a process framework that is tailored at the project level. This process framework would include the necessary guidance for meeting certifications (ISO9001, CMMI), practices for incorporating known good techniques (agile methods, Lean, Six Sigma), and requirements for legal or regulatory reasons. However, the specific details of how to gather requirements, design the system, produce the software, conduct test, and release are left to the product development teams. Is there any effective way to apply defect containment metrics at an organizational level when only a process framework exists at the organizational level? If not, what might be some ideas for metrics that can be distilled from each project (each using a tailored process that fits into the organizational process framework) that captures defect containment metrics to discuss the ability of the process to find and remove defects? The end goal of such a metric would be to consolidate the defect containment practices of a large number of ongoing projects and report to management. The target audience would be people in roles such as the chief software engineer and the chief engineer (of all engineering disciplines) for the organization. Although project specific data would be available, the idea is to produce something that quantifies the general effectiveness of all tailored processes across all ongoing projects. I would suspect that this data would also be presented as part of CMMI, ISO, or similar audits to demonstrate process quality.

    Read the article

  • Great Debugging skills weak problem solving

    - by Mahmoud
    For the 5 years I worked for various companies, I worked in large software like computer vision kits, embedded, games. I found myself very good at debuggins skills, I've even found and fixed bugs in frameworks and I solved them. The problem is that I'm very weak at problem solving. I got interview with Qualcomm, and they said you're fine at software, but you have a limited problem solving, I also had the same results with Google. I'm very bad at solving puzzles and brain teasers. During the interviews I solve all of the software related problems on the blackboard, but when I went to the GM and face math problems and probabilities, I struggle. How can I improve my problem solving skills? Edit Some of the problems: A cake that is cut from anywhere and needs just one cut to halved in equal. I told him cut it horizontally, he said No, consider it as a 2D Problem!. Consider a concenteric 3 circles, each one can get a color, but not matched with the other circle, how many blobs you can make out of those circles ? this was with the GM ( Augmented Reality SDK) Consider a train, an infinite one, and you looked at the window, and there are two cars, one big, and one small, what is the probability of having only a big car, I said 50%, he said, what if that two cars you dont know their length, and you want to get the probability of getting the biggest one, I struggled, didn't solve it... I was really exahusted after long day of interviews prob of having a number divisible by 5 in numbers from 1 to 100.. struggled!! All coding questions I solved them like reverse a string, detect a cycle in a linked list,..etc.

    Read the article

  • Oracle ADF at Oracle OpenWorld 2012

    - by Shay Shmeltzer
    This year is going to be very busy for Oracle ADF developers who'll attend Oracle Open World. Check out the list of Oracle ADF related sessions, labs, demos and other Oracle ADF activities.  This list will help you not to miss any ADF related activity. We have over 50 ADF related sessions, multiple labs including new ones on ADF Mobile, Application Life Cycle Management and ADF in Eclipse, we'll have several demo booths where you can meet product managers, and we'll be featured in several keynotes as well. While we have several "beginners" sessions, you'll find that we have a lot of in-depth technical sessions and sessions that cover best-practices too. Of course, it is not just us product managers presenting about Oracle ADF, there are a lot of Oracle ADF sessions presented by customers, Oracle ACEs, and other developers. So you can learn from the experience of real life implementations. Note that the ADF content starts early on Sunday with a full set of Oracle ADF sessions arranged for you by the Oracle ADF Enterprise Methodology Group - so plan your trip accordingly and be there early Sunday morning. First thing on Monday morning, don't miss the keynote for Oracle ADF developers at 10:45 at the Marriott Marquis - Salon 8 - "The Future of Development for Oracle Fusion—From Desktop to Mobile to Cloud". We are also arranging a meet-up of developers using Oracle ADF at the OTN Lounge on Wed at 4:30pm - and we would love to meet you there - this will also give you an opportunity to meet other Oracle ADF users and members of the community. And after that we can all head over to the big Wed party to see Pearl Jam and Kings of Leon. One recommendation for those who are already registered - start planning your schedule and booking your place in the sessions now through the schedule builder. This will guarantee that you won't be left out of sessions you want to attend due room size limitations. Oracle OpenWorld 2013 will be a must attend event for serious Oracle ADF developers - don't miss it.

    Read the article

  • How can I make my FireFox Browser AddOn Backwards Compatible?

    - by bwheeler96
    I'm making a firefox browser add-on, and I just got all of the code working fine, but it will only install in FireFox 16, and I want it to be compatible at least from 10+, has anyone dealt with this issue? I have my package.json pointing to my install.rdf, and my install.rdf clearly states target applications. Is there any additional setup I need? here is my package.json { "name": "firefox-ext", "license": "MPL 2.0", "author": "", "version": "0.1", "fullName": "firefox-ext", "id": "jid1-AMCw25iQJof53w", "description": "a basic add-on" } and here is my install.rdf. <?xml version="1.0"?> <RDF xmlns="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:em="http://www.mozilla.org/2004/em-rdf#"> <Description about="urn:mozilla:install-manifest"> <em:id>jid1-AMCw25iQJof53w</em:id> <em:name>Generic App</em:name> <em:version>1.0</em:version> <em:type>2</em:type> <em:creator>Brian Wheeler</em:creator> <em:description>Good Stuff</em:description> <em:targetApplication> <Description> <em:id>{ec8030f7-c20a-464f-9b0e-13a3a9e97384}</em:id> <em:minVersion>1.0</em:minVersion> <em:maxVersion>19.0</em:maxVersion> </Description> </em:targetApplication> </Description> </RDF> I'm using the CFX CLI Tools to make this, so everything has been built and tested with cfx init, cfx run, and cfx xpi I just can't figure out compatibility with anything other than 16. Also, major bonus points if someone could explain the advantages of a rapid release cycle, because it really seems to have shot 3rd party Mozilla developers in the foot in terms of software compatibility. Thanks, -Brian

    Read the article

  • What would you do to improve the working of a small Development team?

    - by Omar Kooheji
    My company is having a reshuffle and I'm applying for my boss' job as he's moved up the ladder. The new role would give me a chance to move our development team into the 21st century and I'd like to make sure that: I can provide sensible suggestions in the interview to get the job so I can fix the team If I get the job I can actually enact some changes to actually improve the lives of the developers and their output. I want to know what I can suggest to improve the way we work, because I think it's a mess but every time I've suggested a change it's been shot down because any time spend implementing the change would be time that isn't spent developing software. Here is the state of play at the moment: My team consists of 3-4 developers (Mainly Java but I do some .Net work) Each member of the team is usually works on 2-3 projects at a time We are each responsible for the entire life cycle of the project from design to testing. Usually only one person works on a project (Although we have the odd project that will have more than one person working on it.) Projects tend to be bespoke to single customer, or are really heavilly reliant on a particular customer environment. We have 2-3 "Products" which we evolve to meet customer requirements. We use SVN for source control We don't do continuous integration (I'd like to start) We use a really basic bug tracker for internal issue tracking (I'd like to move to an issue/task management system) Any changes that bring a sudden dip in revenue generation will probably be rejected, the company isn't structured for development most of the rest of the technical team's jobs can be broken down to install this piece of hardware, configure that piece of hardware and once a job is done it's done and you never have to look at it again. This mentality has crept into development team because it's part of the company culture.

    Read the article

  • 2012 Oracle Fusion Middleware Innovation Awards for Oracle Exalogic

    - by Sanjeev Sharma
    Companies from around the world were honored for their innovative solutions using Oracle Fusion Middleware. This year’s 27 award winners, representing 11 countries and a wide span of industries, wowed the judges with a range of projects across eight product categories. 4 awards were given out to customers who demonstrated innovative application of Oracle Exalogic for their mission-critical applications.Below is an overview of the 4 businesses that won the Oracle Fusion Middleware Innovation Award for Oracle Exalogic this year. Company: Netshoes About: Leading online retailer of sporting goods in Latin America.Challenges: Rapid business growth resulted in frequent outages and poor response-time of online store-front Conventional ad-hoc approach to horizontal scaling resulted in high CAPEX and OPEX Poor performance and unavailability of online store-front resulted in revenue loss from purchase abandonment Solution: Consolidated ATG Commerce and Oracle WebLogic running on Oracle Exalogic.Business Impact:Reduced abandonment rates resulting in a two-digit increase in online conversion rates translating directly into revenue up-liftCompany: ClaroAbout: Leading communications services provider in Latin America.Challenges: Support business growth over the next 3  - 5 years while maximizing re-use of existing middleware and application investments with minimal effort and risk Solution: Consolidated Oracle Fusion Middleware components (Oracle WebLogic, Oracle SOA Suite, Oracle Tuxedo) and JAVA applications onto Oracle Exalogic and Oracle Exadata. Business Impact:Improved partner SLA’s 7x while improving throughput 5X and response-time 35x for  JAVA applicationsCompany: ULAbout: Leading safety testing and certification organization in the world.Challenges: Transition from being a non-profit to a profit oriented enterprise and grow from a $1B to $5B in annual revenues in the next 5 years Undertake a massive business transformation by aligning change strategy with execution Solution: Consolidated Oracle Applications (E-Business Suite, Siebel, BI, Hyperion) and Oracle Fusion Middleware (AIA, SOA Suite) on Oracle Exalogic and Oracle ExadataBusiness Impact:Reduced financial and operating risk in re-architecting IT services to support new business capabilities supporting 87,000 manufacturersCompany: Ingersoll RandAbout: Leading manufacturer of industrial, climate, residential and security solutions.Challenges: Business continuity risks due to complexity in enforcing consistent operational and financial controls; Re-active business decisions reduced ability to offer differentiation and compete Solution: Consolidated Oracle E-business Suite on Oracle Exalogic and Oracle ExadataBusiness Impact:Service differentiation with faster order provisioning and a shorter lead-to-cash cycle translating into higher customer satisfaction and quicker cash-conversionCheck out the winners of the Oracle Fusion Middleware Innovation awards in other categories here.

    Read the article

  • SharePoint 2007 / 2010 Content Indexing &ldquo;The file reached the maximum download limit. Check that the full text of the document can be meaningfully crawled.&rdquo;

    - by Stacy Vicknair
    If you have large files in a content source that is being indexed by Sharepoint you might run into the following error message: “The file reached the maximum download limit. Check that the full text of the document can be meaningfully crawled.” This is usually caused because SharePoint’s MaxDownloadSize setting is set lower than the size of the file you are attempting to index. You can increase this value, restart the service then kick off a full crawl in order to fix this issue, but SharePoint 2007 and 2010 have different methods for accomplishing this task.   Sharepoint 2007 Open up the Registry editor and increase the MaxDownloadSize value to a number (in MB) higher than the largest file being indexed. You can find this at: HKEY_LOCAL_MACHINE\Software\Microsoft\Search\1.0\Gathering Manager After you increase the size, cycle the search service and kick off a full crawl of the content source in question.   Sharepoint 2010 With SharePoint 2010 you can use PowerShell via the Sharepoint 2010 Console in order to change the MaxDownloadSize. Execute the following commands to update the value: 1: $ssa = Get-SPEnterpriseSearchServiceApplication 2: $ssa.SetProperty(“MaxDownloadSize”, <new size in MB>) 3: $ssa.Update()   References: http://support.microsoft.com/kb/287231 http://blogs.technet.com/b/brent/archive/2010/07/19/sharepoint-server-2010-maxdownloadsize-and-maxgrowfactor.aspx   Technorati Tags: SharePoint,WSS,MaxDownloadSize,Search

    Read the article

  • Best practice with branching source code and application lifecycle

    - by Toni Frankola
    We are a small ISV shop and we usually ship a new version of our products every month. We use Subversion as our code repository and Visual Studio 2010 as our IDE. I am aware a lot of people are advocating Mercurial and other distributed source control systems but at this point I do not see how we could benefit from these, but I might be wrong. Our main problem is how to keep branches and main trunk in sync. Here is how we do things today: Release new version (automatically create a tag in Subversion) Continue working on the main trunk that will be released next month And the cycle repeats every month and works perfectly. The problem arises when an urgent service release needs to be released. We cannot release it from the main trunk (2) as it is under heavy development and it is not stable enough to be released urgently. In such case we do the following: Create a branch from the tag we created in step (1) Bug fix Test and release Push the change back to main trunk (if applicable) Our biggest problem is merging these two (branch with main). In most cases we cannot rely on automatic merging because e.g.: a lot of changes has been made to main trunk merging complex files (like Visual Studio XML files etc.) does not work very well another developer / team made changes you do not understand and you cannot just merge it So what you think is the best practice to keep these two different versions (branch and main) in sync. What do you do?

    Read the article

  • How do I enable sound with the "linux-virtual" kernel?

    - by Ola Tuvesson
    I've been trying to enable sound for the linux-virtual kernel as I want to run an ultra slim Ubuntu server under VirtualBox but need audio. The resource usage difference between virtual and generic/server is surprisingly large, with the virtual kernel system using 80Mb less RAM after a clean boot (130Mb vs 210Mb), and I really want to squeeze every clock cycle and available byte I can out of the system. Besides, the virtual kernel has some additional optimisations enabled specifically for virtual machines (or so I am told). Now I have compiled my own kernel a few times in the past, for example to include the Intel-PHC module (for improved power management on Thinkpads), so the concept is not entirely alien to me, but I've run into a strange problem which I'm hoping someone can help explain: When I do a diff between the config files for Linux-generic and Linux-virtual there are precious few differences, and certainly none which pertain to sound support; there are really only five or six lines which differ, and they're mainly to do with i/o timing, sleep state and priorities. What gives? I expected the differences to be extensive, and that I would be able to identify the options that enabled audio by looking at them, but my problem doesn't seem to be related to the config file at all (yes, I know about the sound drivers section - it is identical between the two kernel configs). Am I looking in the wrong place? Many thanks!

    Read the article

  • How to slow down a sprite that updates every frame?

    - by xiaohouzi79
    I am going through a Allegro 5 tutorial which has a game loop. There is also a variable "active" which determines if a key is being held down. Thus if the left key is being held down active is on and it begins looping through the row on the sprite sheet that corresponds to moving left. The problem is that this logic is checked everytime the loop is performed thus at approximately 60 fps the three images that are used to do the left walking animation cycle round super fast which means my character looks like it is in a rush. Total beginner question: so what is the correct way to slow down the transition between sprites so that the walking looks like it is done at a moderate pace. Here is the code used to transition across the sprite between the three different phases of the person walking: if (active) { sourceX += al_get_bitmap_width(player) / 3; } else { sourceX = 32; } if (sourceX >= al_get_bitmap_width(player)) { sourceX = 0; } I can kind of guess what it should be in plain English: update sourceX only every certain part of a second but I can't think of how to put this into code.

    Read the article

  • Improving the speed of writing code in C#

    - by Robert Harvey
    Laugh if you want, but I used to develop substantial line-of-business applications in VB6, long before the .NET framework came along. Why, when I was your age, we used to walk two miles in the snow, uphill. Both ways... Love it or hate it, VB6 had a REPL-like feel, and a very rapid development cycle. I would like to know how to come closer to that process in C#. In VB6, I could write a function, execute it, debug it and have it fully functional in a few minutes. I am told this is how the Lisp crowd works. It's a very rapid-fire style of programming. In C# I write a function, then I write a unit test for that function (which is OK, I understand the value of that), then I right-click, run test, wait for the project to compile (takes about 10 seconds right now, which would be an eternity for a REPL loop), and get an exception. Honestly, this feels more like my junior college days, when I used to feed punch cards into a hopper and wait for a printout (exaggerating only slightly for effect). Additionally, my tendency nowadays is to make everything public while I'm testing it. Unit testing with private accessors works fine, but you can't trace through the code (unless, of course, I'm doing something wrong) while you're using them. So what I'd like to know is, what adjustments have you made to your development process in C# to streamline it, and make it possible to write and verify your code very rapidly?

    Read the article

  • Brand new battery is 100% charged but at 0% capacity

    - by Chris Conway
    I just bought a brand new battery to replace one that had seemingly died. I followed the instructions that came with the battery and charged it overnight, then ran my computer on battery until it was in a critical state and charged it overnight again. Now the battery appears to be 100% charged and at the same time at 0% capacity—when it's plugged in it doesn't charge and when it's unplugged the computer immediately goes into low power mode. I've taken the battery out and checked the contacts. I've rebooted the system with and without the battery. Nothing seems to help. I'm not sure if I should blame the battery, the laptop, the charger, or the power management software for this state of affairs. The obvious answer would be the battery but I bought this battery because another year-old battery exhibited similar behavior—I assumed it was dead and a Dell tech came to the same conclusion. I'm loathe to order another new battery without first exploring other explanations. What can I do to diagnose this problem? Here's the /proc info: $ cat /proc/acpi/battery/BAT0/state present: yes capacity state: critical charging state: charged present rate: 1 mA remaining capacity: 0 mAh present voltage: 9754 mV $ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 6600 mAh last full capacity: 6789 mAh battery technology: rechargeable design voltage: 11100 mV design capacity warning: 660 mAh design capacity low: 200 mAh cycle count: 0 capacity granularity 1: 66 mAh capacity granularity 2: 66 mAh model number: DELL WK serial number: 4043 battery type: LION OEM info: SMP

    Read the article

  • How to Be a Software Engineer?

    - by Mistrio
    My problem is kind of weird so please bear with me. I have been working in a start up concerned basically with mobile development since my graduation 2 years ago. I develop apps for iOS but it's not really relevant. The start up structure is simply founders developers, with no middle-tier technical supervision or project management whatsoever. A typical project cycle of ours is like this: meet with a client send very vague recruitment to an outsourced graphics designer dig in development right after we get the design, no questions asked then improvise improvise improvise! It's not that we are unaware that stuff like requirements analysis, UML, design patterns, source code control, testing, development methodologies... etc. exist, we just simply don't use them, and I mean like never. The result is usually a clunk of hardly-maintainable yet working code. Despite everything we are literally flourishing with many successful apps on all platforms and bigger clients each project. The thing is, we want the chaos and we're looking for advice. How would you fix our company technically? Given that you can't hire project managers or team leaders just because we are barely 5 developers, so it wouldn't be a justified cost for the founders, but one-time things like courses, books, private training... etc is an option. Lastly, if it's relevant, we are based in Egypt. Thank you a lot in advance.

    Read the article

  • unity top menu keyboard shortcuts for desktop alone, no programs running

    - by user108754
    Alt+F1 accesses the launcher menu, with arrow keys to navigate the list (side menu). Alt+F10 accesses the top bar in an open application (or Alt+an underlined menu item letter), which allows access to the global ubuntu settings in the top right (battery, wifi/networking, audio, time/calendar, user, power). Alt+F10, when no application is open and you're just staring at the desktop, accesses those ubuntu settings immediately. But the top menu bar does list, in the top left, menu commands for the desktop per se (create new folder, go home, help, start server, etc). These can be accessed only by mouse hovering and click. No way to get to them only by keyboard (arrow keys just cycle through the settings, don't jump over to the left side of the top bar). Is there a keyboard shortcut way to access the desktop menu bar for manipulating icons on your desktop and other general things? Or is this a work in progress for unity? If you use the context menu key (or some equivalent you've set to generate that signal) along with other shortcuts for working on the desktop, you can cover most of the functionality of the top menu bar. However, I don't want to memorize those keys to become proficient. I just want a way to open and browse through those menu items (and they aren't ALL available through hotkeys anyway).

    Read the article

  • Architecture advice for converting biz app from old school to new school?

    - by Aaron Anodide
    I've got a WinForms business application that evolved over the past few years. It's forms over data with a number custom UI experiences taylored to the business, so I don't think it's a candidate to port to something like SharePoint or re-write in LightSwitch (at least not without significant investment). When I started it in 2009 I was new to this type of development (coming from more low level programming and my RDBMS knowledge was just slightly greater than what I got from school). Thus, when I was confronted with a business model that operates on a strict monthly accounting cycle, I made the unfortunate decision to create a separate database for each accounting period. Also, when I started I knew DataSets, then I learned Linq2Sql, then I learned EntityFramework. The screens are a mix and match of those. Now, after a few years developing this thing by myself I've finally got a small team. Ultimately, I want a web front end (for remote access to more straight up screens with grids of data) and a thick client (for the highly customized interfaces). My question is: can you offer me some broad strokes architecture advice that will help me formulate a battle plan to convert over to a single database and lay the foundations for my future goals at the same time? Here's a screen shot showing how an older screen uses DataSets and a newer screen uses EF (I'm thinking this might make it more real for someone reading the question - I'm willing to add any amount of detail if someone is willing to help).

    Read the article

  • My Latest Books &ndash; Professional C# 2010 and Professional ASP.NET 4

    - by Bill Evjen
    My two latest books are out! Professional ASP.NET 4 in C# and VB Professional C# 4 and .NET 4 From the back covers: Take your web development to the next level using ASP.NET 4 ASP.NET is about making you as productive as possible when building fast and secure web applications. Each release of ASP.NET gets better and removes a lot of the tedious code that you previously needed to put in place, making common ASP.NET tasks easier. With this book, an unparalleled team of authors walks you through the full breadth of ASP.NET and the new and exciting capabilities of ASP.NET 4. The authors also show you how to maximize the abundance of features that ASP.NET offers to make your development process smoother and more efficient. Professional ASP.NET 4: Demonstrates ASP.NET built-in systems such as the membership and role management systems Covers everything you need to know about working with and manipulating data Discusses the plethora of server controls that are at your disposal Explores new ways to build ASP.NET, such as working with ASP.NET MVC and ASP.NET AJAX Examines the full life cycle of ASP.NET, including debugging and error handling, HTTP modules, the provider model, and more Features both printed and downloadable C# and VB code examples Start using the new features of C# 4 and .NET 4 right away The new C# 4 language version is indispensable for writing code in Visual Studio 2010. This essential guide emphasizes that C# is the language of choice for your .NET 4 applications. The unparalleled author team of experts begins with a refresher of C# basics and quickly moves on to provide detailed coverage of all the recently added language and Framework features so that you can start writing Windows applications and ASP.NET web applications immediately. Reviews the .NET architecture, objects, generics, inheritance, arrays, operators, casts, delegates, events, Lambda expressions, and more Details integration with dynamic objects in C#, named and optional parameters, COM-specific interop features, and type-safe variance Provides coverage of new features of .NET 4, Workflow Foundation 4, ADO.NET Data Services, MEF, the Parallel Task Library, and PLINQ Has deep coverage of great technologies including LINQ, WCF, WPF, flow and fixed documents, and Silverlight Reviews ASP.NET programming and goes into new features such as ASP.NET MVC and ASP.NET Dynamic Data Discusses communication with WCF, MSMQ, peer-to-peer, and syndication

    Read the article

  • Netbook performs hard shutdown without warning on low battery power

    - by Steve Kroon
    My Asus EEE netbook performs a hard shutdown when it reaches low battery power, without giving any warning - i.e. the power just goes off, without any shutdown process. I can't find anything in the syslog, and no error messages are printed before it happens. I've had this problem on previous (K)Ubuntu versions, and hoped updating to Ubuntu Precise would help resolve the issue, but it hasn't. The option in the Power application for "when power is critically low" is currently blank - the only options are a (grayed-out) hibernate and "Power off". I have re-installed indicator-power to no effect. The time remaining reported by acpi is unstable, as is the time remaining reported by gnome-power-statistics. (For example, running acpi twice in succession, I got 2h16min, and then 3h21min remaining. These sorts of jumps in the remaining time are also in the gnome-power-statistics graphs.) It might be possible to write a script to give me advance warning (as per @RanRag's comment below), but I would prefer to isolate why I don't get a critical battery notification from the system before this happens, so that I can take action as appropriate (suspend/shutdown/plug in power) when I get a notification. Some additional information on the battery: kroon@minia:~$ upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0A:00/power_supply/BAT0 vendor: ASUS model: 1005P power supply: yes updated: Fri Aug 17 07:31:23 2012 (9 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 33.966 Wh energy-empty: 0 Wh energy-full: 34.9272 Wh energy-full-design: 47.52 Wh energy-rate: 3.7692 W voltage: 12.61 V time to full: 15.3 minutes percentage: 97.248% capacity: 73.5% technology: lithium-ion History (charge): 1345181483 97.248 charging 1345181453 97.155 charging 1345181423 97.062 charging 1345181393 96.970 charging History (rate): 1345181483 3.769 charging 1345181453 3.899 charging 1345181423 4.061 charging 1345181393 4.201 charging kroon@minia:~$ cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charging present rate: 332 mA remaining capacity: 3149 mAh present voltage: 12612 mV kroon@minia:~$ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 4400 mAh last full capacity: 3209 mAh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 10 mAh design capacity low: 5 mAh cycle count: 0 capacity granularity 1: 44 mAh capacity granularity 2: 44 mAh model number: 1005P serial number: battery type: LION OEM info: ASUS

    Read the article

  • Suspending my laptop breaks ethernet over firewire, are there commands which can fix it?

    - by Josh
    As mentioned in this question I am using a firewire cable to provide a private network between my laptop and my desktop, because it makes using the screen sharing program synergy much nicer than using WIFI. However when I leave my office for the day and I suspend my laptop, when I return the next day, the desktop and the laptop cannot communicate over firewire anymore. The firewire0 device still has an IP address. but when I try and ping the desktop I get no route to host I'm using kernel 2.6.35-24-generic #42-Ubuntu SMP x86_64 on Ubuntu 10.10. Is there some way I can remedy this without a reboot? Like, removing some kernel modules and re-inserting them? Here's what I have tried so far and the results: root@token:~# dmesg|tail -n 1 [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 root@token:~# modprobe -r firewire_net firewire_ohci firewire_core root@token:~# modprobe -v firewire_ohci insmod /lib/modules/2.6.35-24-generic/kernel/lib/crc-itu-t.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-core.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-ohci.ko root@token:~# dmesg|tail [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592563.410868] firewire_ohci: Removed fw-ohci device. [592579.160086] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [592579.160137] firewire_ohci: isochronous cycle inconsistent [592579.660294] firewire_core: created device fw0: GUID 0000000000000000, S400 [592579.663805] firewire_core: created device fw1: GUID 0017f2fffe89bce6, S400 [592579.663813] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700720] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700842] firewire_core: refreshed device fw0 [592579.702603] firewire_net: firewire0: IPv4 over FireWire on device 0000000000000000 root@token:~# ping stan.firewire PING stan.firewire (192.168.100.1) 56(84) bytes of data. From token.local (192.168.100.3) icmp_seq=1 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=2 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=3 Destination Host Unreachable I also tried removing the modules prior to suspending, and re-inserting after resuming. This did not work either :-(

    Read the article

  • SL150 Modular Tape Library Demo Equipment Purchase Opportunity Limited Special Pricing on Demo Configuration

    - by Cinzia Mascanzoni
    Oracle is pleased to announce that, for a limited time, Oracle VADs may purchase special SL150 Modular Tape Library configurations for demonstration purposes at a significantly reduced price. Submit your order today for these special SL150 Modular Tape Library configurations and you can start showcasing these products in partner demonstrations and proof-of-concepts. VADs may also sell demo units to their VARs so that they may use them in their customer evaluations to help shorten the sales cycle. The offer also allows VARs to sell the demo configuration after a prescribed demonstration period to support the demo product’s cost of ownership. Why wait? Order today! Rules and Guidelines Only authorized VADs are allowed to purchase the special SL150 Modular Tape Library configurations. Purchase time frame is from now until February 28, 2013. Only the predetermined configurations are approved for purchase at the prescribed discounts. Supply is allocated per region and it’s limited. Order MUST be placed via the Oracle Partner Store* (OPS) where applicable. See below for online and offline order processes. If reselling to a VAR, VAD must include the Partner Demonstration Hardware Terms with the order (online via OPS or with offline VAD Ordering Document). Please mark your calendars for the SL150 Modular Tape Library Demo Program webcast on Sept 5th. The objective of this call is to share the details of this demo program with you. For details on how to connect to the webcast, contact your VAD Manager

    Read the article

  • Getting Xbox Live via a wired network with my laptop that has internet access wirelessly

    - by Alex Franco
    I'm running the latest version (as of yesterday anyways) of Ubuntu Desktop 64bit, but installed on my laptop if it makes a difference. I had Windows 7 preinstalled when i bought it and it worked fine with the wireless from my house and bridging the connection with a LAN to my xbox for Live. Now with Ubuntu I tried the same setup, but I'm unfamiliar with Ubuntu so I didn't get far. Best I got so far is wireless internet on my laptop and a wired connection to the xbox that continually connects and disconnects. Heres my network settings. if theres fields not included its because theyre empty on mine or theyre my MAC address or network password Wireless Network 1 settings: Connect Automatically: Checked. Available to all Users: Checked Wireless: SSID: Franco's Mode: Infrastructure MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Wired Network 1: Connect Automatically: Checked Available to all Users: Checked Wired: MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Any help would be greatly appreciated. EDIT: 6:26pm It seems to be staying connected now. Doing the Network test on my xbox it pickups the network, but cannot detect any PC. Restarting the Xbox, however, leaves my computer unable to connect bringing up the Wire Network disconnected 'blip' every minute or so again. Before I had restarted the Xbox it said "Connected 100 MB/s". Now it only says "connecting". I did have my computer and xbox on in this Wired Network Disconnected blip cycle for a long period of time so it may have finally connected, just without the ability to detect my laptop. I left for 2 hours or so in the middle of typing up the original question. I finished posting this when i got back and then tried to mess with it a bit again, in case youre wondering why i didnt include this before... I've said too much. Forgive my long-winded fingers :p

    Read the article

  • Minimize useless tweaking of a numeric app

    - by Potatoswatter
    I'm developing a numeric application (nonlinear optimizer), with a zillion knobs to tweak and rising. It's not my first foray into this domain, but this time there are even more variables in the code and I'm on a tight schedule. Don't want to waste time fiddling. Days or even months can potentially be wasted adjusting variables, recompiling, and reprocessing benchmark datasets. The resulting data is viewed and trouble spots are checked. The overall quality of the solution is reported by the program but the meaning of the report could change over time. (Numeric units for the report are one thing I'm trying to nail down.) One main problem is organizing result files to identify each with specific code changes. Note taking can be a pain, is there software to help with this? Are there agreed best practices to making this kind of development cycle reliably move forward? The solver package converges to its optimal solution with mechanical determination, but I'm all too familiar with the way an excess of design decisions can mire development.

    Read the article

  • What FOSS solutions are available to manage software requirements?

    - by boos
    In the company where I work, we are starting to plan to be compliant to the software development life cycle. We already have, wiki, vcs system, bug tracking system, and a continuous integration system. The next step we want to have is to start to manage, in a structured way, software requirements. We dont want to use a wiki or shared documentation because we have many input (developer, manager, commercial, security analyst and other) and we dont want to handle proliferation of .doc around the network share. We are trying to search and we hope we can find and use a FOSS software to manage all this things. We have about 30 people, and don't have a budget for commercial software. We need a free solution for requirements management. What we want is software that can manage: Required features: Software requirements divided in a structured configurable way Versioning of the requirements (history, diff, etc, like source code) Interdependency of requirements (child of, parent of, related to) Rule Based Access Control for data handling Multi user, multi project File upload (for graph, document related to or so on) Report and extraction features Optional Features: Web Based Test case Time based management (timeline, excepted data, result data) Person allocation and so on Business related stuff Hardware allocation handling I have already play with testlink and now i'm playing with RTH, the next one i try is redmine.

    Read the article

  • How can a large, Fortran-based number crunching codebase be modernized?

    - by Dave Mateer
    A friend in academia asked me for advice (I'm a C# business application developer). He has a legacy codebase which he wrote in Fortran in the medical imaging field. It does a huge amount of number crunching using vectors. He uses a cluster (30ish cores) and has now gone towards a single workstation with 500ish GPUS in it. However where to go next with the codebase so: Other people can maintain it over next 10 year cycle Get faster at tweaking the software Can run on different infrastructures without recompiles After some research from me (this is a super interesting area) some options are: Use Python and CUDA from Nvidia Rewrite in a functional language. For example, F# or Haskell Go cloud based and use something like Hadoop and Java Learn C What has been your experience with this? What should my friend be looking at to modernize his codebase? UPDATE: Thanks @Mark and everyone who has answered. The reasons my friend is asking this question is that it's a perfect time in the projects lifecycle to do a review. Bringing research assistants up to speed in Fortran takes time (I like C#, and especially the tooling and can't imagine going back to older languages!!) I liked the suggestion of keeping the pure number crunching in Fortran, but wrapping it in something newer. Perhaps Python as that seems to be getting a stronghold in academia as a general-purpose programming language that is fairly easy to pick up. See Medical Imaging and a guy who has written a Fortran wrapper for CUDA, Can I legally publish my Fortran 90 wrappers to Nvidias' CUFFT library (from the CUDA SDK)?.

    Read the article

  • Hill International Wins Oracle Eco-Enterprise Innovation Award

    - by Evelyn Neumayr
    In my last blog entry, I discussed Oracle’s Eco-Enterprise Innovation Award, part of the Oracle Excellence awards. Nominations for this year’s awards are due July 17. These awards are presented to organizations that use Oracle products to reduce their environmental footprint while improving their operational efficiency. One of last year’s winners was Hill International. Engineering News-Record magazine recently ranked Hill as the eighth-largest construction management firm in the United States. Hill International was able to streamline its forecasting and improve its visibility into its construction projects’ productivity and profitability using Oracle Primavera. They also implemented Oracle Hyperion Financial Management to standardize its financial reporting and forecasting processes and support its decision-making. With Oracle, Hill gained visibility into the true productivity of each project and cut its financial reporting cycle time from two weeks to one. The company also used the data generated to support new construction project proposals and determine the profitability of potential projects. Hill International realized significant cost savings and reduced its environmental impact on its US$400 million Comcast Center construction project in Philadelphia by centralizing its data storage, reducing paper usage, and maximizing project efficiency. It also leveraged the increased visibility offered by the Oracle solutions to make more environmentally-sound business decisions regarding on-site demolition, re-use of previous structures, green design of new facilities, procurement, and materials usage. See more about Hill International and the other Eco-Enterprise Innovation award winners here.  

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >