Search Results

Search found 1379 results on 56 pages for 'forwarding'.

Page 34/56 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• IPcop Multiple WAN Subnets

  - by obsidian

  We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. We've recently needed additional IPs and the colocation provider issued an additional block of 10. The problem: The 10 new IP addresses issued are in a different subnet with a different gateway. The question: How do I add the new gateway into IPcop? How do I make it so that any outbound traffic in response to any inbound traffic from a new IP go back out through the new gateway? I attempted to add a static route via the console using the following command: route add -net x.x.x.x gw x.x.x.x netmask 255.255.255.192 I also added the new IPs as aliases and setup port forwarding as I've done with the existing IP block. However, when I attempt to access a web server from an external workstation, it just times out. Thanks in advance for your assistance.

  Read the article

• Wireless clients have no route to ethernet clients in OpenWrt router

  - by superjoe30

  I'm using OpenWrt Kamikaze 8.09 on a Linksys WRT54g v1.1 router. I just flashed it with default settings and got everything working, except my wireless laptop cannot ping my desktop which is wired to the router. What can I do to fix this? (My desktop can ping other desktops wired to the router) My routing table: config 'defaults' option 'syn_flood' '1' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'zone' option 'name' 'lan' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'zone' option 'name' 'wan' option 'input' 'REJECT' option 'output' 'ACCEPT' option 'forward' 'REJECT' option 'masq' '1' config 'forwarding' option 'src' 'lan' option 'dest' 'wan' option 'mtu_fix' '1' config 'redirect' option 'src' 'wan' option '_name' 'ssh' option 'proto' 'tcp' option 'src_dport' '22' option 'dest_ip' '192.168.1.100' option 'dest_port' '22' config 'redirect' option 'src' 'wan' option '_name' 'http' option 'proto' 'tcp' option 'src_dport' '8888' option 'dest_ip' '192.168.1.100' option 'dest_port' '8888'

  Read the article

• Accessing apache in ubuntu 10 virtualbox guest from ubuntu 10 host

  - by Francis L

  I did the following: installed VirtualBox 3.1.6 OSE in ubuntu 10 desktop. installed ubuntu 10 server on a virtual machine in VirtualBox. select "LAMP server" and "OpenSSH server" options during the ubuntu server installation. leave network "adapter 1" of virtual machine as "NAT". use "VBoxManage" described in manual to setup port forwarding on the host (Protocol: TCP, GuestPort: 80, HostPort: 8080). verify "ExtraDataItem" have been added to "ubuntuServer1.xml" (my virtual machine name) correctly. run command "pgrep apache" in ubuntu server in virtual machine to ensure apache is running. Everything went well. But, when I try to access the apache from the browser on the host with "http://localhost:8080/", it just continue fetching with no response. Now, I'm struck! Please help! Many many thanks in advance!

  Read the article

• Exim forwards not going out through TLS

  - by Blake

  I'm trying to get Exim to use STARTTLS to send emails that are just FORWARDS. I have a server accepting email at example-accepting.com for users. So I want [email protected] to forward all email to [email protected]. If I do this from the command like on example-accepting.com... echo "test" | mail -s "ssl/tls test" [email protected] Success!! Sent via TLS BUT, if I send an email to [email protected] the forward fails, it's NOT being sent via TLS. I've tried both forwarding the email via /etc/aliases and the user .forward file. The email is indeed sent, but NOT via TLS. Why is it when I run "mail" from the command like it's working like it should, but a .forward is not using TLS? Thanks

  Read the article

• Why isn't Synergy working for me?

  - by Anthony

  It worked for about a week then stopped working. I'm trying to make it work between a Windows 7 laptop and a Windows XP laptop. My router is a Linksys E1000. I tried uninstalling and reinstalling the program multiple times. I've tried port forwarding. I've tried making exceptions in the firewall. I've tried disabling the firewalls. It might be relevant also that Input Director doesn't work either. What am I doing wrong?

  Read the article

• Installing ZendServer on IIS6

  - by Wayne M

  I need to run ASP and PHP applications side by side, so I installed ZendServer Community Edition on our existing Server 2003 platform. I specified it to use the existing IIS instance so I don't have to deal with multiple ports (we use ZoneEdit to manage our DNS and they don't seem to allow anything other than port 80 without forwarding). The install went smooth but when I try to configure and manage the install by going to http://localhost/ZendServer (or even just localhost) I get a Bad Request (Invalid Hostname) error. I haven't done anything except install the server, and this is my first time working with ZendServer. How do I fix this so I can get things set up?

  Read the article

• Re-Route Mail to a port other than 25

  - by Ken

  Is there a way to route mail to another port? I have an email account attached to my laptop that I'd like to be able to send and receive mail from. Due to mobility, I'll be passing through various networks that will probably block this port. My dynamic DNS provider allows me to utilize web-forwards for MX domains; is this possible? where I can web forward to a domain:port which is managed by my DNS provider when I traverse between networks. If not, is there a way? Of course i could use web-mail or relay-forwarding from my home server, but that's not geeky enough.

  Read the article

• Forward Shibboleth Environment Variables to Tomcat via Apache

  - by Deepak Singh Rawat

  I am using Shibbolethv2.3 with Apache web server and Tomcat application server. I am using Apache as a reverse proxy using mod_proxy.so. I am not able to forward the Shibboleth environment variables from Apache to Tomcat. I am able to forward the attributes in the headers but as already mentioned in the wiki this approach is not safe. I have tried forwarding the environment variables by the following directive : SetEnv AJP_username ${username} then at the Java side I can access the attribute by : request.getAttribute("username"); The strange thing here is that, I get a different value instead of the one set by Shibboleth. I get the Windows account name as a result. If I use any other attribute name, I get a null value. I have searched a lot and have run out of options. Please guide me towards the right solution. My setup details : Shibboleth version : 2.3 OS : Windows XP SP3 Webserver : Apache 2.2 Application Server : Tomcat 6 Proxy module : mod_proxy.so

  Read the article

• iptables openvpn forward selectively from eth to tun

  - by Bryan Hunt

  Simple for those who know, indecipherable for those who don't... I'm running openVPN on (hypothetical) 66.66.66.66, I want to FORWARD incoming traffic, arriving on interface eth0 to interface tun0. It would also be nice to filter - based on destination IP address. I'm doing the NAT later on, but like to lock down early wherever possible. So onto the main course... This works: #Enable forwarding from eth0 to tun0 iptables -A FORWARD -i eth0 -o tun+ -j ACCEPT But this doesn't pass any packets whatsoever: #Stricter version iptables -A FORWARD -i eth0 -o tun+ --dst 66.66.66.66 -j ACCEPT Am I being unacceptably foolish?

  Read the article

• How to specify VNC port number with Mac OS X built-in VNC client?

  - by Eonil

  Is it possible to specify VNC port number in built-in VNC client of Mac OS X? I'm trying to connect to Xen VPS machine with Finder's built-in VNC client. I used address like this. vnc://server:port But it fails because it uses another port, and Finder's built-in VNC cannot handle port number. As I know it handles the number after colon as display-number, not a port number. Is there a way to specify port number on the VNC client? Or any workaround for this? (port forwarding??? I have no idea about it...)

  Read the article

• How to prove that an email has been sent?

  - by bguiz

  I have a dispute on my hands in which the other party (landlord's real estate agent) dishonestly claims to not have received an email that I truly did send. My questions is, what are the ways to prove that the email was indeed sent? Thus far, the methods that I have already thought of are: Screenshot of the mail in the outbox Forwarding a copy of the original email I am aware of other things like HTTP/ SMTP headers etc that would exist as well. Are these useful for my purposes, and if so how do I extract these? The email in question was sent using Yahoo webmail ( http://au.mail.yahoo.com/ ). Edit: I am not seeking legal advice here, just technical advice as to how to gather this information.

  Read the article

• Enable Cisco ASA as an SSH Tunneling

  - by Jim

  I am trying to utilize my Cisco ASA as a SSH Tunnel. I've configured this before when using a Linux server as the SSH target, however I cannot seem to get it to work with the ASA. I have configured and enabled SSH on the Cisco ASA, as well as a username that I can SSH to the console, however the SSH Tunneling feature does not work. For example, on my PC I use Putty with a Local Tunnel defined to a server behind the ASA. I should be able to (if SSH connected to the ASA) be able to access the server. See screenshot of putty. has anyone come across this before? Again this is to use my Cisco ASA as a SSH tunnel, this is not a port forwarding. -Jim

  Read the article

• Juniper Networks SRX240 as a office router?

  - by Jordan Mendelson

  We're a small (7 person) fast growing startup who just got our new office and we're having a 100 Mbps line installed from Cogent. I'm not familiar with Juniper devices, however the equivalent Cisco appears to be rather expensive. Features we'd like: Offsite VPN access (PPTP or L2TP IPsec) - something Mac compatible IPv6 support NAT - ideally supporting multiple outside addresses mapped to VLANs DHCP DNS forwarding would be nice QoS to keep our SIP phones happy (managed through RingCentral) VLANs for guest/internal The device is going to be connected to a set of SIP phones as well as two Ruckus 7962s for wireless access. Eventually I'd like to connect it to a Juniper ESX switch as we grow. Would a Juniper SRX240 handle this ok?

  Read the article

• Email setup on dedicated servers

  - by zaf

  Am thinking seriously of renting a dedicated server. Now I know how to setup apache and the underlying scripting engines and databases but I'm a bit clueless with how the emails would work. Currently, I'm on a shared hosting account and I get a fancy gui which allows me to nicely add a domain, setup nameservers and then the emails for all domain names with either simple forwarding or the full account which also has a webmail app behind it. What options do I have? Are there non complicated ways to have the same email setup experience? Or are there reliable external providers I could use? My past experiences with sendmail/postfix have always been fuzzy - not exactly knowing whats happening behind the scenes.

  Read the article

• ICMP - TTL - Trace Route

  - by dbasnett

  I asked this question at Stack Overflow and then thought this may be the better place to ask. Given the following situation: PC --- |aa RTR1 bb| --- |aa RTR2 bb| --- |aa RTR3 bb| etc Each of the |aa rtr bb| is meant to be a router with two ports aa and bb. My question is this. When you do a trace route from PC which router port address should respond with time to live exceeded in transit message? I seem to remember being taught to think of the router as being in as many parts as ports, so that in my scenario when aa is forwarding the packet to bb and decrements the ttl to 0, it will be the address of the aa port in the failure message. I am trying to find the definitive answer. Thanks.

  Read the article

• Network wide rule to forwared IP address

  - by Patrick

  Hi, we have a virtual machine which hosts a web based bug tracker in our network which is reached internally via e.g. 192.168.1.5:9800. From the outside we made a port forwarding in our firewall so that the web site can be reached via e.g. 72.10.10.10:9800. Now that works fine but the problem is that we got different IP addresses to reach the same service depending if we are in the office or at home and when the service sends out an email the link doesn't always work :) So we are looking for a solution to fix it. One could be to make a rule in out firewall that all communication to 72.10.10.10:9800 is forwarded to 192.168.1.5:9800... If that's possible that is considering it's an IP address + a port. The reason we used a port is because we only got one static public IP address but multiple virtual web appliances. Thanks for any suggestions or solutions :) Patrick PS: The network is a Win 2008 R2 domain by the way

  Read the article

• Use Dynamic DNS to access Java servlet, still need port forward ?

  - by Frank

  If I use Dynamic DNS such as the free service at https://www.dyndns.com, do I still need to set up static IP and do port forward ? I have a DSL, most likely with dynamic IP address, and I run a Java servlet to get Paypal IPN messages on my notebook, in order for the messages to reach my notebook, I : [1] set up static IP and [2] did port forwarding. But I found each time the PC re-starts, it has a different external IP, so I was suggested to [3] get Dynamic DNS service like the free one mentioned above, but now I'm a bit confused, if I have step [3], do I still need to do [1] and [2], isn't step [3] supposed to do [1] and [2] for me ? But since I've already done [1],[2], now I wonder if they would cause trouble for step [3], do I need to undo them ? Or do I need all of them together ?

  Read the article

• Windows Load-Balancing, Forward-Proxying Software

  - by LandonC

  Does anyone know of any Windows software that will do forward-proxying load-balancing, like HAProxy does? There are tons of reverse-proxy solutions, but I can't find any that do what HAProxy does, that is, allows you to load-balance a group of forwarding-proxies. I have a proxy farm (don't ask) that I need to round-robin balance. HAProxy will do it, but is very unstable on Windows. Thoughts? I'd really appreciate it. And yes, this is an actual, production environment question.

  Read the article

• Socksify TCP connections reaching a gateway IP -- preferably without iptables

  - by Alexandra Neagu

  I have Virtualbox installed on Debian with a few virtual machines. I can't install anything in the guests, and I use host only networking, vboxnet0. The host IP in the host network is 192.168.56.1, and the guests have static IPs in 192.168.56.0/24. I access Internet with a SOCKS proxy (without authentication) and I would like the Virtualbox guests TCP connections to be sent through the SOCKS proxy. This would also be useful for socksifying external TCP reaching a gateway network card or wireless access point. I looked at transocks, tun2socks, with dante-client, etc., but I don't know how can I achieve this without enabling IP forwarding in the host and using iptables. Maybe to attach somehow the Virtualbox vboxnet0 network to the tunnel tun0 used by tun2socks? Or maybe there is a way to do NAT to tun0 in Virtualbox? I only need TCP traffic and I don't need UDP, not even for DNS.

  Read the article

• Godaddy hosting with dynamic ip?

  - by Razor Storm

  I bought a domain name on godaddy.com let's call it www.website.com, but my server has a dynamic ip, how do I resolve this issue? What I've tried: get a dns account at dyndns.com let's call it dns.dyndns.com, so I set up godaddy to forward the domain to dns.dyndns.com. problem: When the user goes to www.website.com, they see dns.dyndns.com in the url bar. Bad So then I set up the forwarding on godaddy to forward with domain masking, but then the problem is now that users can't even see url paths/get queries/ or hash marks anymore! `www.website.com/folder/search?id=4#ajax=4` becomes just www.website.com in the url bar. bad! What do I do?

  Read the article

• How to specify VNC port number with Mac OS X built-in VNC client?

  - by Eonil

  Is it possible to specify VNC port number in built-in VNC client of Mac OS X? I'm trying to connect to Xen VPS machine with Finder's built-in VNC client. I used address like this. vnc://server:port But it fails because it uses another port, and Finder's built-in VNC cannot handle port number. As I know it handles the number after colon as display-number, not a port number. Is there a way to specify port number on the VNC client? Or any workaround for this? (port forwarding??? I have no idea about it...)

  Read the article

• ssl between balancer members?

  - by jemminger

  I have apache running on one machine as a load balancer: <VirtualHost *:443> ServerName ssl.example.com DocumentRoot /home/example/public SSLEngine on SSLCertificateFile /etc/pki/tls/certs/example.crt SSLCertificateKeyFile /etc/pki/tls/private/example.key <Proxy balancer://myappcluster> BalancerMember http://app1.example.com:12345 route=app1 BalancerMember http://app2.example.com:12345 route=app2 </Proxy> ProxyPass / balancer://myappcluster/ stickysession=_myapp_session ProxyPassReverse / balancer://myappcluster/ </VirtualHost> Note that the balancer takes requests under SSL port 443, but then communicates to the balancer members on a non-ssl port. Is it possible to have the forwarding to the balancer members be under SSL too? If so, is this the best/recommended way? If so, do I have to have another SSL cert for each balancer member? Does the SSLProxyEngine directive have anything to do with this?

  Read the article

• Can I use MX records to deliver some addresses to Google Apps and some to my server?

  - by Josh

  I have whm installed on my VPS, which my domain MX records are pointing to: 0:mail.mydomain.com and whm/cpanel has mail forwarding rules which pipes certain @mydomain email addresses into my CRM software. But for certain email addresses I want to forward into Google Apps. For example, [email protected], [email protected] pipes into cPanel -- CRM (mail.mydomain.com) but [email protected] should be going to Google MX records. Is that possible? The reason why is I want to register for Google Apps such as analytics and other Google services under [email protected]. My initial thoughts were to add a subdomain such as [email protected] and point that subdomain's MX records to Google.. but I want to avoid this if possible.

  Read the article

• Qmail does not forward mail to a specific domain

  - by jahufar

  Hi I have a dedicated hosting account with GoDaddy.com. I've pointed my domain's email to work with Google apps. The server has qmail running and it forwards email to all domains just fine except for MY domain (mydomain.com) - it says 550 User xxx not found in mydomain.com I believe it thinks I've hosted email on the server itself (not gmail) and it's trying to validate if [email protected] exists on my server (which is not the case since it's all handled by google apps). How do I make it forward mail to all domains? Thank you :) EDIT: I would only need it forwarding emails if the connection originates from 127.0.0.1 - which I believe is the default way it's configured. So to clarify: I just need a purely forwarded configuration so my PHP scripts have the ability to send email.

  Read the article

• IPv6 static routes

  - by user98651

  I am looking to configure a few hosts with IPv6 on my network. The router (running CentOS 5) is configured with an Hurricane Electric (HE) tunnel which works fine on that host. However, I would like to statically add a few additional hosts on the same LAN to have IPv6 through this tunnel. No, I don't want radvd or dhcpv6 to do the work for me in this case. I already have IPv6 forwarding enabled in sysctl.conf. I am looking for help with the next steps (statically adding the routes). Lets say the IP addresses are as follows: Router: 2001:470:1b07:1:: Host1: 2001:470:1b07:2:: How would I go about making them see each other? Thanks in advance for the help.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >