Search Results

Search found 1353 results on 55 pages for 'hint'.

Page 34/55 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Java @Contented annotation to help reduce false sharing

    - by Dave
    See this posting by Aleksey Shipilev for details -- @Contended is something we've wanted for a long time. The JVM provides automatic layout and placement of fields. Usually it'll (a) sort fields by descending size to improve footprint, and (b) pack reference fields so the garbage collector can process a contiguous run of reference fields when tracing. @Contended gives the program a way to provide more explicit guidance with respect to concurrency and false sharing. Using this facility we can sequester hot frequently written shared fields away from other mostly read-only or cold fields. The simple rule is that read-sharing is cheap, and write-sharing is very expensive. We can also pack fields together that tend to be written together by the same thread at about the same time. More generally, we're trying to influence relative field placement to minimize coherency misses. Fields that are accessed closely together in time should be placed proximally in space to promote cache locality. That is, temporal locality should condition spatial locality. Fields accessed together in time should be nearby in space. That having been said, we have to be careful to avoid false sharing and excessive invalidation from coherence traffic. As such, we try to cluster or otherwise sequester fields that tend to written at approximately the same time by the same thread onto the same cache line. Note that there's a tension at play: if we try too hard to minimize single-threaded capacity misses then we can end up with excessive coherency misses running in a parallel environment. Theres no single optimal layout for both single-thread and multithreaded environments. And the ideal layout problem itself is NP-hard. Ideally, a JVM would employ hardware monitoring facilities to detect sharing behavior and change the layout on the fly. That's a bit difficult as we don't yet have the right plumbing to provide efficient and expedient information to the JVM. Hint: we need to disintermediate the OS and hypervisor. Another challenge is that raw field offsets are used in the unsafe facility, so we'd need to address that issue, possibly with an extra level of indirection. Finally, I'd like to be able to pack final fields together as well, as those are known to be read-only.

    Read the article

  • Does it make the game more fun when the user is forced to progress through the levels sequentially rather than letting them pick and play?

    - by BeachRunnerJoe
    Hello. For the first time in my game, I'm stuck with a real design dilemma. I guess that's a good thing ;) I'm building a word puzzle game that has five levels, each with 30 puzzles. Currently, the user has to solve one puzzle at a time before moving to the next. However, I'm finding the user occasionally gets stuck on a puzzle, at which point they can no longer play until they solve it. This is obviously bad because many people will probably just quit playing the game and delete the app. The only elegant solution I can find to helping the player get unstuck is changing the design of the game to allow the users to pick any puzzle to play at any time. This way, if they get stuck, they can come back to it later and at least they have other puzzles to play in the meantime. It's my opinion, however, that this new flow design doesn't make the game as fun as the original flow design where the player has to complete a puzzle before moving to the next. To me, it's like anything else, when you only have one of something, it's more enjoyable, but when you have 30 of something, it's far less enjoyable. In fact, when I present the user with 30 puzzles to choose from, I'm concerned I might be making them feel like it's a lot of work they have to do and that's bad. I even had a tester voluntarily tell me that being forced to complete a puzzle before moving to the next is actually motivating. My questions are... Do you agree/disagree? Do you have any suggestions for how I can help the player get unstuck? Thanks so much in advance for your thoughts! EDIT: I should mention that I've already considered a few other solutions to helping the user get unstuck, but none of them seem like good ideas. They are... Add more hints: Currently, the user gets two hints per puzzle. If I increase the hint count, it only makes the game more easy and still leaves the possibility of the user getting stuck. Add a "Show Solution" button: This seems like a bad idea because it's my opinion this takes the fun out of the game for many people who would probably otherwise solve the puzzle if they didn't have the quick option to see the solution.

    Read the article

  • Why occlusion is failing sometimes?

    - by cad
    I am rendering two cubes in the space using XNA 4.0 and occlusion only works from certain angles. Here is what I see from the front angle (everything ok) Here is what I see from behind This is my draw method. Cubes are drawn by serverManager and serverManager1 protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); switch (_gameStateFSM.State) { case GameFSMState.GameStateFSM.INTROSCREEN: spriteBatch.Begin(); introscreen.Draw(spriteBatch); spriteBatch.End(); break; case GameFSMState.GameStateFSM.GAME: spriteBatch.Begin(SpriteSortMode.Deferred, BlendState.AlphaBlend); // Text screenMessagesManager.Draw(spriteBatch, firstPersonCamera.cameraPosition, fpsHelper.framesPerSecond); // Camera firstPersonCamera.Draw(); // Servers serverManager.Draw(GraphicsDevice, firstPersonCamera.viewMatrix, firstPersonCamera.projMatrix); serverManager1.Draw(GraphicsDevice, firstPersonCamera.viewMatrix, firstPersonCamera.projMatrix); // Room //roomManager.Draw(GraphicsDevice, firstPersonCamera.viewMatrix); spriteBatch.End(); break; case GameFSMState.GameStateFSM.EXITGAME: break; default: break; } base.Draw(gameTime); fpsHelper.IncrementFrameCounter(); } serverManager and serverManager1 are instances of the same class ServerManager that draws a cube. The draw method for ServerManager is: public void Draw(GraphicsDevice graphicsDevice, Matrix viewMatrix, Matrix projectionMatrix) { cubeEffect.World = Matrix.CreateTranslation(modelPosition); // Set the World matrix which defines the position of the cube cubeEffect.View = viewMatrix; // Set the View matrix which defines the camera and what it's looking at cubeEffect.Projection = projectionMatrix; // Enable textures on the Cube Effect. this is necessary to texture the model cubeEffect.TextureEnabled = true; cubeEffect.Texture = cubeTexture; // Enable some pretty lights cubeEffect.EnableDefaultLighting(); // apply the effect and render the cube foreach (EffectPass pass in cubeEffect.CurrentTechnique.Passes) { pass.Apply(); cubeToDraw.RenderToDevice(graphicsDevice); } } Obviously there is something I am doing wrong. Any hint of where to look? (Maybe z-buffer or occlusion tests?)

    Read the article

  • Cannot boot from K/Ubuntu install disk on my UEFI system

    - by user93241
    I just got a new system and have been trying to get it set up w/ Win7 & Kubuntu dual-boot, but I've got a major problem. The BIOS of my motherboard (an Asus Crosshair 990FX) is strictly UEFI -- there is no legacy support mode available. I've been reading up on how to get Kubuntu installed in UEFI mode but no matter what I try I cannot seem to even boot into my install CD/USB key properly. I can get as far as the selection screen ("Try Kubuntu", "Install Kubuntu"...) but this screen starts off not appearing correctly. If I try moving the cursor around it sometimes seems to correct itself and show me my choices. But once I select "Try Kubuntu" it starts loading, the screen goes black and then proceeds to flicker -- about once every 5-10 seconds or so. This continues indefinitely. I've tried this with both Kubuntu & Ubuntu installation media, even the AMD64+Mac Ubuntu variety that is supposed to be a lot more flexible w.r.t. UEFI. The only hint I've had that the system might have booted correctly is a little drum sound that plays when booting from the Ubuntu install disk. Well, that and the fact that when I hit my system's power button it seems to shut down correctly, even ejecting the CD at the end. This might be a video driver issue; my system has two nVidia 550's, one of which is attached to my primary monitor. (The secondary isn't hooked up yet.) I'll keep looking over similar questions but any advice would be greatly appreciated. UPDATE: I've tried booting into my 12.04 install CD twice now, each time using two different options supplied by my BIOS. One seemed to offer the ability to boot into my CD under UEFI mode -- this didn't even produce the initial boot menu. The other method offers the ability to boot into my CD NOT under UEFI mode. This DOES produce the boot menu, but after this point it seems I still cannot get to a proper video mode to see what's going on.

    Read the article

  • Why distant objects draw in front of close objects?

    - by cad
    I am rendering two cubes in the space using XNA 4.0 and the layering of objects only works from certain angles. Here is what I see from the front angle (everything ok) Here is what I see from behind This is my draw method. Cubes are drawn by serverManager and serverManager1 protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); switch (_gameStateFSM.State) { case GameFSMState.GameStateFSM.INTROSCREEN: spriteBatch.Begin(); introscreen.Draw(spriteBatch); spriteBatch.End(); break; case GameFSMState.GameStateFSM.GAME: spriteBatch.Begin(SpriteSortMode.Deferred, BlendState.AlphaBlend); // Text screenMessagesManager.Draw(spriteBatch, firstPersonCamera.cameraPosition, fpsHelper.framesPerSecond); // Camera firstPersonCamera.Draw(); // Servers serverManager.Draw(GraphicsDevice, firstPersonCamera.viewMatrix, firstPersonCamera.projMatrix); serverManager1.Draw(GraphicsDevice, firstPersonCamera.viewMatrix, firstPersonCamera.projMatrix); // Room //roomManager.Draw(GraphicsDevice, firstPersonCamera.viewMatrix); spriteBatch.End(); break; case GameFSMState.GameStateFSM.EXITGAME: break; default: break; } base.Draw(gameTime); fpsHelper.IncrementFrameCounter(); } serverManager and serverManager1 are instances of the same class ServerManager that draws a cube. The draw method for ServerManager is: public void Draw(GraphicsDevice graphicsDevice, Matrix viewMatrix, Matrix projectionMatrix) { cubeEffect.World = Matrix.CreateTranslation(modelPosition); // Set the World matrix which defines the position of the cube cubeEffect.View = viewMatrix; // Set the View matrix which defines the camera and what it's looking at cubeEffect.Projection = projectionMatrix; // Enable textures on the Cube Effect. this is necessary to texture the model cubeEffect.TextureEnabled = true; cubeEffect.Texture = cubeTexture; // Enable some pretty lights cubeEffect.EnableDefaultLighting(); // apply the effect and render the cube foreach (EffectPass pass in cubeEffect.CurrentTechnique.Passes) { pass.Apply(); cubeToDraw.RenderToDevice(graphicsDevice); } } Obviously there is something I am doing wrong. Any hint of where to look? (Maybe z-buffer or occlusion tests?)

    Read the article

  • To Obtain EPOCH Time Value from a Packed BIT Structure in C [migrated]

    - by xde0037
    This is not a home assignment! We have a binary data file which has following data structure: (It is a 12 byte structure): I need to find out Epoch time value(total time value is packed in 42 bits as described below): Field-1 : Byte 1, Byte 2, + 6 Bits from Byte 3 Time-1 : 2 Bits from Byte 3 + Byte 4 Time-2 : Byte 5, Byte 6, Byte 7, Byte 8 Field-2 : Byte 9, Byte 10, Byte 11, Byte 12 For Field-1 and Field-2 I do not have issue as they can be taken out easily. I need time value in Epoch Time (long) as it has been packed in Bytes 5,6,7,8 and 3 and 4 as follows: (the bit structure for the time value is as follows): Bytes 5 to 8 (32 bit word) Packs time value bits from 0 thru 31 (byte 5 has 0 to 7 bits, byte 6 has 8 to 15, byte 7 has 16 to 23, byte 8 has 24 to 31). the remaining 10 bits of time value are packed in Bytes 3 and byte 4 as follows: byte 3 has 2 bits:32 and 33, and Byte 4 has remaining bits : 34 to 41. So total bits for time value is 42 bits, packed as above. I need to compute epoch value coming out of these 42 bits. How do I do it? I have done something like this but not sure it gives me correct value: typedef struct P_HEADER { unsigned int tmuNumber : 21; unsigned int time1 : 10; // Bits 6,7 from Byte-3 + 8 bits from Byte-4 unsigned int time2 : 32; // 32 bits: Bytes 5,6,7,8 unsigned int traceKey : 32; } __attribute__((__packed__)) P_HEADER; Then in the code : P_HEADER *header1; //get input string in hexa,etc..etc.. //parse the input with the header as : header1 = (P_HEADER *)inputBuf; // then print the header1->time1, header1->time2 .... long ttime = header1->time1|header1->time2; //?? is this the way to get values out? Any hint tip will be appreciated. Environment is : gcc 4.1, Linux Thanks in advance.

    Read the article

  • Postgres - could not create any TCP/IP sockets

    - by Jacka
    I'm running a rails app in development with postgresql 9.3. When I tried to start passenger server today, I got: PG::ConnectionBad - could not connect to server: Connection refused Is the server running on host "localhost" (217.74.65.145) and accepting TCP/IP connections on port 5432? No big deal I thought, that happened before. Restarting postgres always solved the problem. So I ran sudo service postgresql restart and got: * Restarting PostgreSQL 9.3 database server * The PostgreSQL server failed to start. Please check the log output: 2014-06-11 10:32:41 CEST LOG: could not bind IPv4 socket: Cannot assign requested address 2014-06-11 10:32:41 CEST HINT: Is another postmaster already running on port 5432? If not, wait a few seconds and retry. 2014-06-11 10:32:41 CEST WARNING: could not create listen socket for "localhost" 2014-06-11 10:32:41 CEST FATAL: could not create any TCP/IP sockets ...fail! My postgresql.conf points to the defaults: localhost and port 5432. I tried changing the port but the error message is the same (except the port change). Both ps aux | grep postgresql and ps aux | grep postmaster return nothing. EDIT: In postgresql.conf I changed listen_addresses to 127.0.0.1 instead of localhost and it did the trick, server restarted. I also had to edit my applications' db config and point to 127.0.0.1 instead of localhost. However, the question is now, why is localhost considered to be 217.74.65.145 and not 127.0.0.1? That's my /etc/hosts: 127.0.0.1 local 127.0.1.1 jacek-X501A1 127.0.0.1 something.name.non.example.com 127.0.0.1 company.something.name.non.example.com

    Read the article

  • Apache2 Permission denied: access to / denied

    - by futureled
    Hi, after installing and starting apache2 i can't open the website and got the error "Forbidden You don't have permission to access / on this server." I tried some different options in the httpd.conf, but nothing helped me solving this problem. All permissions for every directory are "drwxr-xr-x". The directory /www contains a file names index.html with the same permissions. Please do not wonder, the time in the errorlog is not correctly. I have no idea what the problem is, i hope someone can help me. my httpd.conf: ServerRoot "/etc/apache2" Listen 80 User daemon Group daemon ServerAdmin [email protected] DocumentRoot "/var/www" Options FollowSymLinks AllowOverride None Order Deny,Allow Deny from all Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all DirectoryIndex index.html Order allow,deny Deny from all Satisfy All ErrorLog /var/apache2/logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog /var/apache2/logs/access_log common ScriptAlias /cgi-bin/ "/usr/share/apache2/cgi-bin/" AllowOverride None Options None Order allow,deny Allow from all DefaultType text/plain TypesConfig /etc/apache2/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz SSLRandomSeed startup builtin SSLRandomSeed connect builtin my error_log: [Sat Jan 01 00:50:26 2000] [notice] caught SIGTERM, shutting down [Sat Jan 01 00:50:33 2000] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sat Jan 01 00:50:34 2000] [notice] Apache/2.2.3 (Unix) mod_ssl/2.2.3 OpenSSL/0.9.8j configured -- resuming normal operations [Sat Jan 01 00:50:36 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:37 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:37 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:37 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:38 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:38 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied

    Read the article

  • How do I make my internal dns forward requests to a given server

    - by ankimal
    We have a DNS server internally that looks up IP addresses for all internal hosts and connects to root dns servers for all other domains (the rest of the internet). Here is my config options { listen-on port 53 { 127.0.0.1;any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query {192.168.1.0/24; 127.0.0.1; }; recursion yes; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view “internal” { // What the home network will see match-clients { 127.0.0.1;any; }; match-destinations { 127.0.0.1;any; }; recursion yes; zone "." IN { type hint; file "named.ca"; }; include "internal_zones.conf"; }; We need to tweak this to go to our ISPs dns, x.y.z.w instead of the root dns servers if the host cannot be resolved internally. Config: Fedora 10/Bind 9.5.2

    Read the article

  • How do I improve my incremental-backup performance?

    - by Alistair Bell
    I'm currently using the traditional rsync+cp -al method to create incremental/snapshot backups of our server tree. The backups are going onto a pair of eight-disk towers connected to the backup machine (a Sandy Bridge machine with 16 GB of RAM, running CentOS 5.5) via four eSATA connections (four disks per connection). Each disk is a regular 2 TB disk, so we have 32 TB of disk space connected to the backup machine. We're backing up about 20 TB of data on the servers with this. The problem is that each daily backup is taking more than 24 hours, and the real time-killer isn't the actual rsync, but the time it takes to perform a cp -al of the tree locally on the backup machine. It's taking more than 12 hours just to make the shadow copy of the tree, and as far as I can tell the performance backlog is at the disk (top shows the cp using a lot of RAM but not a lot of CPU and mostly in uninterruptible-sleep state) We have the server data split into four major volumes (and a few minor ones), and each of these backups runs in parallel (with some offsets in the cron to try to get some disks' cp done first). There are two volumes on the backup drive, both striped LVM volumes of 16 TB each. So obviously I need to improve the performance because it's unusable as it stands. The first question is: when CentOS 6 comes out, with support for btrfs, will making snapshots of subvolumes with btrfs substantially increase this performance? The second is: is there a way, with ext3 or something else supported in CentOS 5 or 6, to 'encourage' it to put the directories/inodes in one part of a volume (which could happen to be the part that's on an SSD, via LVM) and the files in another? That would presumably solve the problem, but I don't know of ways to hint ext3 like that.

    Read the article

  • How do I fix this Windows 7 wireless connectivity issue?

    - by Charles Randall
    I have a laptop with an Intel Wireless Centrino 6300 module. Recently, the machine has stopped properly connecting to my wireless router. It will get stuck in a loop of connecting, then disconnecting and reconnecting. While connected, it will simply say "No Internet Access." Running inSSIDer 2.0, it shows my network jumping around between two channels -- I know this isn't the case, because I've set my router to sit on one single channel. My MacBook Pro, Boxee Box, PS3, and Xbox 360 all connect fine to the wireless and have no problems at all. I know it's not the wireless module, as I bought a second one recently assuming the first had died -- but I get the same behavior with both. Sometimes, I can fix the issue temporarily by deleting the network (Using the Manage Wireless Networks page), and then re-adding it (via standard wireless methods). Then it will work for a few days. But inevitably the problem comes back, and now the laptop simply won't connect to the wireless at all, even if I take steps that usually work. Since I've ruled out the hardware, and it's unlikely some kind of interference issue (because I would expect to see it on any multitude of other devices), I would think at this point that it's a problem with Windows itself. One thing that might be a hint, even though I delete the network, when I add it again, it's always listed as "Wireless Network Connection 2" even though there isn't another in the list.

    Read the article

  • Please insert a disk into SD/MMC - Vista problem [closed]

    - by Naunidh
    Possible Duplicate: Please insert a disk into SD/MMC - Vista problem Hi I tried pushing my 2GB micro SD card using the inbuilt card reader. On clicking the drive I get "Please insert a disk into SD/MMC". This problem is really frustrating. The card works fine on other computers so does the microSD to SD attachment. I have done following o fix. - Updated Vista and installed SP1. - Updated the TI drivers for FlashDrive. - Checked Vaio site for updates (none required). - Added a new entry HKLM\SYSTEM\ControlS* et001\Services\tifm21\Parameters/SDParam=1 took the hint from (http://tinyurl.com/nk33tp) I have restarted the PC multiple times. As soon as I put the card in, the SD/MMC device icon blips, so it seems the hardware is at least detecting something. The card reader was working fine few days back. I guess some windows update has broken something, does any one have any idea on how to proceed. MY laptop is VGN-N365E.

    Read the article

  • Apache2 will not start on OpenSUSE after enabling mod_pagespeed

    - by alpha1
    I have a linode VPS, running openSUSE 12.1 (A little outdated, but stable). I have installed the RPMS for mod_pagespeed. mod_pagespeed.conf has "ModPagespeed on". Restarting apache fails after enabling pagespeed. the errors are not very helpful. li361-39:/usr/lib64/apache2 # a2enmod pagespeed li361-39:/usr/lib64/apache2 # service apache2 restart redirecting to systemctl Job failed. See system logs and 'systemctl status' for details. li361-39:/usr/lib64/apache2 # systemctl status apache2.service apache2.service - apache Loaded: loaded (/lib/systemd/system/apache2.service; enabled) Active: failed since Thu, 06 Jun 2013 20:49:00 +0000; 1s ago Process: 6701 ExecStop=/usr/sbin/httpd2 -D SYSTEMD -k stop (code=exited, status=0/SUCCESS) Process: 6704 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -k start (code=exited, status=1/FAILURE) Main PID: 6637 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/apache2.service li361-39:/usr/lib64/apache2 # a2dismod pagespeed li361-39:/usr/lib64/apache2 # service apache2 restart redirecting to systemctl li361-39:/usr/lib64/apache2 # And the error log (/var/log/apache2/error_log) is useless as well. [Thu Jun 06 20:48:59 2013] [notice] caught SIGTERM, shutting down [Thu Jun 06 20:49:12 2013] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Thu Jun 06 20:49:13 2013] [notice] Apache/2.2.21 (Linux/SUSE) mod_ssl/2.2.21 OpenSSL/1.0.0k PHP/5.4.15 configured -- resuming normal operations EDIT This is from /var/log/messages Jun 12 14:24:14 li361-39 start_apache2[27951]: httpd2-prefork: Syntax error on line 116 of /etc/apache2/httpd.conf: Syntax error on line 34 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_pagespeed.so into server: /usr/lib64/apache2/mod_pagespeed.so: undefined symbol: ap_unixd_config Full Log is here: http://pastebin.com/hjnbZZTr I've tried looking for other logs and checking the mod_pagespeed.conf against posts claiming it works and nothing is striking as wrong. Any Ideas?

    Read the article

  • What open source ecommerce webshops offer #1: usability, #2: PayPal integration, and #3: ease of administration and use

    - by Jonathan Hayward
    I've spent several days trying to deploy Satchmo, in the process asking several questions about deployment (http://stackoverflow.com/questions/11277407/can-anyone-explain-this-error-message-deploying-a-satchmo-project-under-gunicorn, http://stackoverflow.com/questions/11277685/is-there-a-howto-to-fcgi-for-deploying-satchmo, and http://stackoverflow.com/questions/11278295/what-is-the-most-stable-release-of-satchmo). Django's tagline is "The web framework for perfectionists with deadlines," and Satchmo's tagline is equally forceful: "The webshop for perfectionists with deadlines." I'm looking more to set up, configure, design, etc., rather than code for this one, and I'm taking a bit of a hint that for me at least the "with deadlines" bit is something that I cannot manage. Deployment has been a time sink. So, taking a step back, I don't specifically need to edit and extend the source code; what I want are first, good usability and a clean experience for the end-user, then being easy to deploy/install/manage/maintain, and enough so that even if you're having a slow day it should at most be one day's work to install, one day's work to get running, and one day's work to rebrand as white label (for simple branding). What ecommerce webshops should I be looking at?

    Read the article

  • Please, help writing a MIB

    - by facha
    I have a problem with an snmpwalk query returning snmp variables in a non-uniform way: .1.3.6.1.2.1.10.127.1.3.3.1.2.215 -> Hex-STRING: 24 37 4C 0C 65 0E .1.3.6.1.2.1.10.127.1.3.3.1.2.216 -> Hex-STRING: 24 37 4C 0B A2 DA .1.3.6.1.2.1.10.127.1.3.3.1.2.217 -> STRING: "$7L f:" .1.3.6.1.2.1.10.127.1.3.3.1.2.218 -> STRING: "$7L k2" As you can see, some variables are of a STRING type, others are Hex-STRING. So, I'm trying to write a simple MIB to force them all come out as Hex-STRING. This is where I've gotten so far: TEST-MIB DEFINITIONS ::= BEGIN PhysAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x:" STATUS current SYNTAX OCTET STRING test OBJECT-TYPE SYNTAX PhysAddresss MAX-ACCESS read-only STATUS current ::= { 1 3 6 1 2 1 10 127 1 3 3 1 2 } END However, snmpwalk doesn't seem to notice my textual convention (even though the "test" variable is being recognized). I still get a mixture of STIRNGs and Hex-STRINGs. Could anybody point to where is my mistake? snmpwalk -v2c -cpublic 192.168.1.2 TEST-MIB::test ... TEST-MIB::test.216 = Hex-STRING: 24 37 4C 0B A2 DA TEST-MIB::test.217 = STRING: "$7L f:"

    Read the article

  • Failed to open the Parallels networking module

    - by user49204
    I'm running Parallels Desktop 7 on OSX Lion and encounter the issue in the subject on every time I'm trying to launch Parallels VM. The error message contains a hint to restore to network configuration default which does not help. As been advised by some forums to ran the following script: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hypervisor.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hid_hook.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_usb_connect.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_vnic.kext" The output of: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" is: Diagnostics for /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext: Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeDirectory /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeRequirements /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeResources /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeSignature Dependency Resolution Failures: No kexts found for these libraries: com.parallels.kext.prl_hypervisor I've noticed that prl_netbridge is not being loaded (when I'm trying to unload it, I'm notified it is not loaded). Am I doing something wrong? What can be the reason for such behaviour?

    Read the article

  • can't access SATA card config screen on boot, nor access the disks

    - by Ronald
    We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

    Read the article

  • Hints on diagnosing performance issue in OpenBSD firewall

    - by Tom
    My OpenBSD 4.6 pf firewall has started having really bad performance in the past few weeks. I've isolated the firewall (as opposed to the WAN connection, switch, cable, etc.) as the problem, but need a hint on how to further diagnose or fix the problem. The facts: Normal setup is: DSL Modem - FW Ext. NIC - FW Int. NIC - Switch - Laptop Normal setup described above gives only 25 Kbps! Plugging the laptop straight from the DSL modem gives a 1 MBps connection (full speed, as advertised). Therefore, the DSL connection seems to be OK. Plugging the laptop directly into the firewall's internal NIC (bypassing the switch) also gives only 25 Kbps. Therefore, the switch does not seem to be a problem. I've replaced the ethernet cables, but it didn't help. Here's the weird thing. Reloading the ruleset (/sbin/pfctl -Fa -f /etc/pf.conf) causes the laptop's connection to go up to 1 Mbps (i.e. full speed) for a few minutes before it gradually degrades back down to 25Kbps again. Any ideas on what's wrong or how I could further diagnose the problem?

    Read the article

  • Ubuntu 12.04 glusterfs volume failed to mount at boot time

    - by user183394
    I have just setup 7 KVM guests, all running Ubuntu 12.04 LTS 64bit Minimal server to test out glusterfs 3.2.5 from the Ubuntu official repo. Two of them form a mirrored pair (i.e. replica 2), and five of them are clients. I am still new to this file system and would like to gain some "hands-on" experience. The setup was mostly uneventful, until I put in the following into each glusterfs client's /etc/fstab: 192.168.122.120:/testvol /var/local/testvol glusterfs defaults,_netdev 0 0, where 192.168.122.120 is the IP address of the first "glusterfs server". If I issue either a manaul mountall or a mount.glusterfs 192.168.122.120:/testvol /var/local/testvol on CLI, a mount shows that the volume is successfully imported. But once a client is rebooted, after it comes back up, the volume is not mounted! I searched the Internet, and found this article, but since I am not running both client and server on the same node, IMHO it's not strictly applicable. So, as a kludgy "get-around", I put in a sleep 3 && mount.glusterfs 192.168.122.120:/testvol /var/local/testvol into each client node's /etc/rc.local. It seems to be able to get the volume mounted on each node, as far as I can tell. But this is quite ugly, and I would appreciate a hint as to how to resolve this glusterfs-non-boot-time-mounting issue correctly. Note that I used the IP address of the first "glusterfs server" although the /etc/hosts of all nodes have been populated with their hostnames. I figured that the use of IP address is more robust. --Zack

    Read the article

  • Why Is Web Sharing Broken on My Mac?

    - by Sam Murray-Sutton
    Background: I use my Mac for web development, running copies of web sites locally. I recently installed the Snow Leopard update, which to all intents and purposes seems to have gone fine, except... What's not working? Web-sharing; more specifically I can't turn it on via preferences. The preference pane just hangs when I try to. So Apache doesn't start on reboot. I can start Apache by hand, but I don't know enough to either setup apache to start with the computer, or to properly fix web sharing. Further details My Apache error log shows nothing on when the system boots up (as I would expect). This is the error message when I try to start web sharing from the sharing preference pane. 28/09/2009 10:58:05 System Preferences[834] setInetDServiceEnabled failed with 1 for org.apache.httpd Here's the messages given when I start apache from the command line. [Mon Sep 28 10:35:53 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Mon Sep 28 10:35:54 2009] [warn] mod_bonjour: Skipping user 'sams' - index file /Users/sams/Sites/index.html has zero length. [Mon Sep 28 10:35:54 2009] [notice] Digest: generating secret for digest authentication ... [Mon Sep 28 10:35:54 2009] [notice] Digest: done [Mon Sep 28 10:35:54 2009] [notice] Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8k DAV/2 PHP/5.3.0 Phusion_Passenger/2.2.5 configured -- resuming normal operations Please let me know if you need any further details on this. Any help would be greatly appreciated. UPDATE I have added an answer of my own below - I was able to solve it thanks to being pointed in the right direction by the comments below, so thanks very much. But I'm still not totally clear as to what caused the problem or how my solution addressed it, so I'm leaving the question open for now.

    Read the article

  • SSRS 2005 inaccessible after install

    - by Gabriel Guimarães
    Hi I've just installed SQL 2005 and Database Engine is ok, however I can't access it for nothing. When I go to http://localhost/reports I get this prompt for a username and password and it fails with 401.1. When I tried to disable kerberos on the virtual directories, nothing changed. I've tried changing the auth to anonymous and get: Internet Explorer cannot display the webpage. When I access from another machine, I get the prompt only once and get this error. Internet Explorer cannot display the webpage. Can't access this with IE or SSMS 2005. If I try to access with Management Studio i get this error: TITLE: Microsoft SQL Server Management Studio The underlying connection was closed: An unexpected error occurred on a receive. (Microsoft.SqlServer.Management.UI.RSClient) ADDITIONAL INFORMATION: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System) An existing connection was forcibly closed by the remote host (System) BUTTONS: OK By the way the server info: its a Win 2003 R2 Standard with IIS 6 Can't seem to understand this. Does anyone have a hint?

    Read the article

  • Amazon EC2 instance was not available for few minutes (amazon showed that everything ok)

    - by Salvador Dali
    Few minutes ago my amazon Ec2 instance was unavailable for a few minutes. During this time neither I was able to connect to web-site with http, nor I was able to ssh to it. Also I was not able to connect to my amazon management console for some time (less than amount of unavailability of my instance). When I was able to connect to management console, it was showing me that everything is running smoothly (but I still was not able to connect to instance in any way for a minute or two). During this time I have checked their status page just to see that there is no issues (my instance is in Ireland and there is nothing wrong there today). After that I was able to log in. I checked my logins with last to see that no one except me was logging in. I also looked in apache logs and there was no errors or warnings during this time. Right now when I see my amazon monitor, I see a small spike in CPU in last 15 minutes (but this is from 10% to like 20%) I have no idea what can it be (I have never experienced anything like this before) and therefore I have no idea how scared should I be or what else should I look for. Can anyone give me a hint what my actions should be in such situation?

    Read the article

  • Automatically Kill/Restart Process(es) When Memory is Critically Low

    - by nemesisfixx
    I have a Debian Wheezy VPS box where am running a couple of Django apps in production. Ideally, would have tried addressed my current memory footprint issues by optimizing the apps, adding more RAM or augmenting with Swap. But the problem is that I doubt there's much memory optimization I'd milk from optimizing the Django apps (the stack being open-source and robust), and adding RAM is a cost constraint for me (this is a remote VPS), also, the host doesn't offer options to use Swap! So, in the meantime (as I wait to secure more resources to afford more RAM), I wish to mitigate the scenarios where the server runs out memory so that I just have to request a VPS restart (as in, at that point, I can't even SSH into the box!). So, what I would love in a solution is the ability to detect when a process (or generally, total system memory usage) exceeds a certain critical amount (for now, example the FREE RAM falls to say 10%) - which I've noticed occurs after the VPS's been up for long, and when also traffic is suddenly much to some of the heavy apps (most are just staging apps anyway). So, I wish to be able to kill/restart the offending process(es) - most likely Apache. Which solution when done manually in these situations has restored sane memory usage levels - a hint that possibly one or more of the Django apps has a memory leak? In brief: Monitor overall system RAM usage When FREE RAM falls below a given critical threshold (say below 10%), kill/restart the offending process(es) - or simpler, if we assume from my current log analysis (using linux-dash) that Apache is often the offender, then kill/restart it. Rinse and repeat...

    Read the article

  • PostgreSQL continuous archiving not running archive_command

    - by Whatsit
    I've been trying to set up continuous archiving for a simple, test PostgreSQL 9.0 database, as per the documentation. In postgres.conf I've set: wal_level = archive archive_mode = on archive_command = 'touch /home/myusername/backup/testtouch' archive_timeout = 30s ...and restarted PostgreSQL. The file listed by touch never appears. I can manually run the touch command and it works as expected. If I try to create a backup, it waits forever for the archive_command. In psql; postgres=# SELECT pg_start_backup('touchtest'); pg_start_backup ----------------- 0/14000020 (1 row) postgres=# SELECT pg_stop_backup(); NOTICE: pg_stop_backup cleanup done, waiting for required WAL segments to be archived WARNING: pg_stop_backup still waiting for all required WAL segments to be archived (60 seconds elapsed) HINT: Check that your archive_command is executing properly. pg_stop_backup can be cancelled safely, but the database backup will not be usable without all the WAL segments. What would cause this? How can I troubleshoot it? Additional info: Running on CentOS 5.4. PostgreSQL 9.0.2 installed as root.

    Read the article

  • IPMI sdr entity 8 (memory module) only showing 3 records?

    - by thinice
    I've got two Dell PE R710's - A has a single socket and 3 DIMMs in one bank B has both sockets and 6 (2 banks @ 3 DIMMs) filled The output from "ipmitool sdr entity 8" confuses me - according to the OpenIPMI documentation these are supposed to represent DIMM slots. Output from A (1 CPU, 3 DIMMS, 1 bank.): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 27 degrees C Temp | 0Bh | ns | 8.1 | Disabled Temp | 0Ch | ucr | 8.1 | 52 degrees C Output from B (2 CPUs, 3 DIMMS in both banks, 6 total): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 26 degrees C Temp | 0Bh | ok | 8.1 | 25 degrees C Temp | 0Ch | ucr | 8.1 | 51 degrees C Now, I'm starting to think this output isn't DIMMS themselves, but maybe a sensor for each bank and something else? (Otherwise, shouldn't I see 6 readings for the one with both banks active?) The CPU's aren't near 50 deg C, so I doubt the significantly higher reading is due to proximity - Is anyone able to explain what I'm seeing? Does the output from my ipmitool sdr entity 8 -v here on pastebin seem to hint at different sensors? The sensor naming conventions are poor - seems like a dell thing. Here is output from racadm racdump

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >