Search Results

Search found 8384 results on 336 pages for 'laptop batteries'.

Page 34/336 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Can't adjust backlight on an Nvidia 335m GT

  - by Vladimir

  I have a laptop mySN QMG6 / Chiligreen Mobilitas NW which is Quanta TW9 barebone with intel i3 and nvidia 335m GT onboard. On ubuntu distros 10.04, 10.10, 11.04 and 11.10 i had problem with changing screen backlight with nouveau and nvidia drivers. FN+F4/F5 buttons did not change my brightness. I tried to edit xorg.conf, adding Option “RegistryDwords” “EnableBrightnessControl=1? Also tried to add some lines to grub acpi_osi="Linux" acpi_backlight=vendor Neither worked for me. Today I installed Ubuntu 12.04 beta2 and... With nouveau driver my FN key works, and changes the brightness (is it a new 3.0.22 linux kernel, or patched nouveau driver, i don't know). This is a big step forward. But, when installing proprietary nvidia driver (295.33) FN button stops working and i can't change brightness. I also tried workaround with xorg and grub with no result. Tried to install acpi from apt - no result. Is there anything left to try? I really need that nvidia driver working with FN keys, as i would like to have a working 3D acceleration. P.S. Does the nouveau driver has 3d acceleration like nvidia drivers??? If there is need to provide some log data, please write what should i print, as i'm a bit new to Ubuntu. P.P.S. Same problems i had with other Linux distros (Mint, Fedora and others) P.P.P.S. Other FN buttons work with both drivers (Mute, VOL UP/DOWN, WiFi on/off, Bluetooth, Sleep, Start/Pause, Stop, Next/Prev song) Some new thoughts... CONFIG_BACKLIGHT_GENERIC=m could this be an issue? Made this by grep BACKLIGHT /boot/config-3.2.0-22-generic-pae Full grep output can be viewed here: http://pastebin.com/sMRd2Z4k

  Read the article

• Cloning (mirroring) laptop display to area of external monitor display

  - by intuited

  I'm using Maverick "10.10" Meercat on a HP Pavilion tx2110. This machine has an NVidia Go6150 graphics card, and sports a 1280x800 display. I have an external monitor which can do 1280x1024 resolution. FWIW I'm using openbox as my window manager; as I understand it this shouldn't be a factor. I'd like to clone the display to the monitor, so that the size of the desktop remains at 1280x800, and there is a horizontal blank area on the external monitor. I.E. I want to avoid having to pan the display of the desktop on either monitor. So the actual resolution of the monitor would be 1280x1024, but the resolution of the section of the monitor where stuff was actually being displayed would be 1280x800. Using the nvidia-settings applet, I'm able to set up the cloned display so that the desktop size is 1280x1024 (the resolution of the external monitor), but can't find a way to instead have the desktop size stay at the resolution of the laptop's built-in display. Is this achievable? Ideally I'd like the external monitor's blank area to be at the top of the screen, i.e. for it to align the display with the bottom of the screen.

  Read the article

• Brand new battery is 100% charged but at 0% capacity

  - by Chris Conway

  I just bought a brand new battery to replace one that had seemingly died. I followed the instructions that came with the battery and charged it overnight, then ran my computer on battery until it was in a critical state and charged it overnight again. Now the battery appears to be 100% charged and at the same time at 0% capacity—when it's plugged in it doesn't charge and when it's unplugged the computer immediately goes into low power mode. I've taken the battery out and checked the contacts. I've rebooted the system with and without the battery. Nothing seems to help. I'm not sure if I should blame the battery, the laptop, the charger, or the power management software for this state of affairs. The obvious answer would be the battery but I bought this battery because another year-old battery exhibited similar behavior—I assumed it was dead and a Dell tech came to the same conclusion. I'm loathe to order another new battery without first exploring other explanations. What can I do to diagnose this problem? Here's the /proc info: $ cat /proc/acpi/battery/BAT0/state present: yes capacity state: critical charging state: charged present rate: 1 mA remaining capacity: 0 mAh present voltage: 9754 mV $ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 6600 mAh last full capacity: 6789 mAh battery technology: rechargeable design voltage: 11100 mV design capacity warning: 660 mAh design capacity low: 200 mAh cycle count: 0 capacity granularity 1: 66 mAh capacity granularity 2: 66 mAh model number: DELL WK serial number: 4043 battery type: LION OEM info: SMP

  Read the article

• Can't install Ubuntu on my Windows 7 laptop

  - by Ana

  I tried installing Ubuntu in two different ways: First, I tried the Windows Installer, and it goes well until I reboot the system and, when booting on Ubuntu, I get the error: No root file system defined. Second, I uninstalled wubi by going to to Control Panel - Uninstall Programs - Ubuntu. Then, I booted the laptop from the live CD and selected install. It boots okay but in the screen right after the one that says to make sure you have 4.5 GB available, Internet connection, etc, when I click continue it throws me a message saying that Ubuntu had an internal error and asks me if I want to report the error. After that, I just have a black screen and nothing else! No Ubuntu installed, no boot option to go back to Windows. Nothing! My goal is to install Ubuntu alongside Windows 7 (without the hassle of formatting the computer, creating partition, etc). How can I do it (preferable using Windows Installer)? How can I solve the "No root file system defined" that I encountered when I used the Windows Installer?

  Read the article

• Good Laptop .NET Developer VM Setup

  - by Steve Brouillard

  I was torn between putting this question on this site or SuperUsers. I've tried to do a good bit of searching on this, and while I find plenty of info on why to go with a VM or not, there isn't much practical advise on HOW to best set things up. Here's what I currently HAVE: HP EliteBook 1540, quad-core, 8GB memory, 500GB 7200 RPM HD, eSATA port. Descent machine. Should work just fine. Windows 7 64-bit Host OS. This also acts as my day-to-day basic stuff (email, Word Docs, etc...) OS. VMWare Desktop Windows 7 64-bit Guest OS with all my .NET dev tools, frameworks, etc loaded on it. It's configured to use 2 cores and up to 6GB of memory. I figure that the dev env will need more than email, word, etc... So, this seemed like a good option to me, but I find with the VM running, things tend to slow down all around on both the host and guest OS. Memory and CPU utilization don't seem to be an issue, but I/O does. I tried running the VM on an external eSATA drive, figuring that the extra channel might pick up the slack. Things only got worse (could be my eSATA enclosure). So, for all of that I have basically two questions in one. Has anyone used this sort of setup and are there any gotchas either around the VMWare configuration or anything else I may have missed here that you can point me to? Is there another option that might work better? For example, I've considered trying a lighter weight Host OS and run both of my environments as VMs? I tried this with Server 2008 Hyper-V, but I lose too much laptop functionality going this route, so I never completed setup. I'm not averse to Linux as a host OS, though I'm no Linux expert. If I'm missing any critical info, feel free to ask. Thanks in advance for your help. Steve

  Read the article

• Blank screen after Switch User or Resume

  - by matt wilkie

  About half the time when I switch users or resume from standby or resume the screen goes blank (black). If I work the cursor keys I can hear the system bell when it gets to the end of the user list. I can also successfully login, going from memory, but screen stays black. Sometimes closing and re-opening the lid will light up the screen again. Pressing the special Function key to enable/disable external monitor connection has no effect [Fn]-[F5],[Fn]-[F6]. If none of the previous work I need to put the computer into hibernation or full power off to restore screen function. If I watch closely when switching users I think I can see the screen initially start to light up and then quickly fade to black. The computer is an Acer Aspire 3500, model ZL6, running Ubuntu 10.10 installed 2 days ago. No proprietary drivers are in use. I'll provide a list of hardware details as soon as I can figure out how to generate that (didn't there used to be an entry for hardware details under the System menu?). Possibly related questions: No resume after Hibernate or Standby When I resume from suspension - the screen is blank Switch user fails to complete successfully For what it's worth, blank after resume also used to happen occasionally when the laptop was running XP-Home, but nowhere near as often, perhaps 6 or 8 times a year. UPDATE: I found System Administration System Testing and ran the Monitor test. It went very very dark, but the window elements could be discerned, and the whole screen flashed (from very very dark to black). On the third repeat of that same test the screen went to full blaupck and stayed there. Moving the mouse, via touchpad, or touch keys did not wake it up again. I had to close the lid and put the computer into hibernate, and press the power button to restore it. UPDATE2: output of lshw: http://pastebin.com/q7n8676r, lspci: http://pastebin.com/6ujzVK4r UPDATE3: sometimes I can restore the screen by flipping to console 1 with ctrl-alt-F1 and then back to graphical with ctrl-alt-F7.

  Read the article

• Packard Bell EasyNote MZ35 freezes when AC unplugged and wireless on

  - by Sense Hofstede

  I would like to ask for some help debugging an irritating problem I'm having with my Packard Bell EasyNote MZ35 and Ubuntu 10.10. Always when the laptop is connected to a wireless network and the AC power lead is unplugged—so it's running on battery power—the system freezes. The screen turns black and shows the error GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0), although this error is completely unrelated to the actual problem. Previous searches on the internet indicate that this error is unrelated to the bug I'm experiencing. It is suggested that Ubuntu tries to hibernate or suspend and that you're seeing the black screen running 'behind' the X server. That would explain the fact that curiously you still see—but cannot move—the mouse cursor. I've already set all the values of the GConf keys in /apps/gnome-power-manager/actions/ to 'nothing', disabled all power management actions I could find, but it didn't solve the problem. It is important to note that the freeze doesn't happen immediately after you unplug the AC power lead. The icon in the notification area may have changed already, but the freeze only occurs when the Notify OSD bubble appears that tells you how many time is left with your battery. Does anyone here have a clue about this problem? A workaround or the cause? If anyone could help me with disabling possible suspend/hibernate behaviour that might be related to this issue, that would be appreciated too. This issue has been reported as bug #666852.

  Read the article

• Disk failure is imminent Laptop Hard drive ~5 months old

  - by Drew

  There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

  Read the article

• Dell Laptop's Bluetooth isn't detected by Ubuntu

  - by vishwaje

  I have Dell vostro 3500 Laptop. I Installed Ubuntu 12.04. It doesn't detect my bluetooth. below is my information. lsusb | grep Bluetooth Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) lsmod | grep bluetooth bluetooth 158438 10 bnep,rfcomm rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: no 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: no (wifi working fine. I disabled it using network menu. So, it's fine) dmesg | grep Bluetooth [ 21.981835] Bluetooth: Core ver 2.16 [ 21.981872] Bluetooth: HCI device and connection manager initialized [ 21.981877] Bluetooth: HCI socket layer initialized [ 21.981881] Bluetooth: L2CAP socket layer initialized [ 21.981891] Bluetooth: SCO socket layer initialized [ 21.986047] Bluetooth: RFCOMM TTY layer initialized [ 21.986059] Bluetooth: RFCOMM socket layer initialized [ 21.986065] Bluetooth: RFCOMM ver 1.11 [ 22.361783] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.361791] Bluetooth: BNEP filters: protocol multicast So How can I fix this? I saw other place (I don't remember which site) They said, some times, when in windows, if bluetooth disabled by windows driver, It can't be enabled by linux. So, I should install windows and enable blueethooth from windows and then re install linux. That is impossible for me, because I don't have Windows installation media. But I tried this, which is I installed windows xp on virtual box. Vbox showed me thow unknow USB devices. I connected them and installed windows bluethooth drivers to xp. But it didn't ditected Bluethooth either. Also, when I set off mode in hardware switch, those unknown devices disappear from Vbox usb device seletcion menu. So, they are definitely something to do with wifi or bluethooth. Please help me..

  Read the article

• My laptop with Linux/ Ubuntu isn't working

  - by Andy Campos

  I have a dell laptop with ubuntu linux. A day I tried to start it up and a black screen just appeared that says: GNU GRUB version1.98+20100804-5ubuntu3 (and these clickable options:) -Ubuntu, with Linux 2.6.35-22-generic -Ubuntu, with Linux 2.6.35-22-generic (recovery mode) -Memory test (memtest86+) -Memory test (memtest86+, serial console 115200) When I click the first one, a bunch of text appears like: mount: mounting /dev/disk/by-uuid/8396a225... failed: invalid argument mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /sys on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Target file system doesn't have requested /sbin/init No init found. Try passing init= bootarg Enter 'help' for a list of built-in commands BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) When I enter 'help' a bunch more incomprehensible text appears. Whenever I press the enter key all that pops up is (intetramfs) If anyone can make rhyme or reason out of this please, please help me out so it can boot up normally and i can be set. If there's some kind of special code I have to type in or something I know nothing about computers.

  Read the article

• How do I disable all lid close processes?

  - by Mat

  I want to be able to close my laptop without Ubuntu registering it. I've been looking everywhere and I've found plenty of people with the same problem but no real solutions. Obviously I have set the lid close setting to 'do nothing' for both AC and battery, but when I close the lid it still blanks the screen, disconnects from external monitors, and brings up the lock screen when I reopen it. Some people have suggested disabling the lock screen, but this doesn't stop the screen blanking and external displays disconnecting, and I don't want to disable the lock anyway, as I still want it when I tell Ubuntu to lock or sleep or whatever else. Others have suggested it's something to do with ACPI support, but I have tried changing some ACPI scripts, and even removed them completely (e.g. /etc/acpi/lid.sh and /etc/acpi/events/lidbtn) and it makes no difference. There must be a bit of code somewhere that can just be removed or commented out or altered to prevent any lid close actions - does anyone know where? I know this has been asked before, but I'm getting really frustrated with this problem. I'm disappointed to say that I'm actually using Windows 7 more often just because it's quite happy to completely ignore the closed lid. So I just wanted to check, are we any closer to a real solution for this problem?

  Read the article

• Dell xps 15z fan issue in ubuntu 12.04

  - by Paxinum

  I just updated to ubuntu 12.04 on my Dell laptop xps 15z. The trouble is that I hear a slight ticking sound every 3rd second, probably from a fan. This is a new issue in this ubuntu version. I use the recommended boot options for grub, i.e. acpi_backlight=vendor, but I do not use any acpi=off or acpi=noirq. Is there a way to fix this issue from ubuntu, by maybe controlling the fans somehow? EDIT: Notice, the sound goes away as the fan speeds up, (when doing calculations or such), so it is really a fan issue. EDIT2: I have located the issue: If I use conky 1.9, together with the command execpi for a python application, then the sound appears, and the noise syncs with the update interval for conky (NOT for the update interval for execpi!). The noise seems to be proportional to the complexity of the drawing that is needed. This is very strange, as this issue was not in the prev. version of conky I used. The solution was to increase the update interval for conky from 0.5 to 3, i.e. update every 3rd second instead of twice a second.

  Read the article

• Upgrade went wrong, laptop essentially 'bricked'

  - by hexagonheat

  I have an old netbook I was trying to upgrade from 10.04 to 10.10. Ubuntu was in the process of upgrading when everything completely froze. I left it sit for an hour but it would not respond to anything. So I powered down the machine and it didn't have the necessary files to run Ubuntu. I went to the terminal and it told me to put in some command that I can not remember to 'rebuild' something. That takes me to now, when I turn on the laptop it comes up with a screen "GNU GRUB version 1.98+20100804-5ubuntu3.3" and has a bunch of options such as: 1. Ubuntu, with Linux 2.6.35-32-generic 2. Ubuntu, with Linux 2.6.35-32-generic (recover mode) etc. (there are like 15 of these with different numbers after 2.6.35 and the word 'generic'. It doesn't seem to matter what I pick, it will go to the "Ubuntu" loading screen with the colored dots but then every time it will freeze and I have to reboot to the same thing. I can't seem to get a terminal prompt anywhere either. Any ideas? I can't think of what to do :(

  Read the article

• Laptop runs HOT after 12.10 upgrade!

  - by dinkelk

  I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

  Read the article

• How can i make Brightness Control work?

  - by Semen

  I have Xubuntu 12.04 with latest updates on Toshiba Satellite A210-15K laptop semen@bloknot:~$ uname -a Linux bloknot 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ...and I can't adjust LCD brightness (. I tried to use fnfx tool: semen@bloknot:~$ fnfx-client FnFX Client v0.3 (c) 2003, 2004 Timo Hoenig <[email protected]> fatal error: Could not open "/home/semen/.fnfxrc". Please make sure that the default config is accessible. ...and xbacklight: semen@bloknot:~$ xbacklight No outputs have backlight property ...and I tried to add acpi_osi=Linux and acpi_backlight=vendor parameters in GRUB config, but nothing happens. I soppose .fnfxrc file must be available after installation or first fnfx demon lauch. Isn't it? semen@bloknot:~$ cat /sys/class/backlight/toshiba/brightness -5 semen@bloknot:~$ cat /sys/class/backlight/toshiba/max_brightness 7 semen@bloknot:~$ echo 6 | sudo tee /sys/class/backlight/toshiba/brightness [sudo] password for semen: 6 ... ...but brightness is the same. Help, please. P.S. Execuse me for my poor English. UPD. I have spent 2 days to solve this boring problem, but I can't. So. If I wish linux work correctly, I have to choose another distro.

  Read the article

• Laptop Display Not Working

  - by etrask

  Hello, I just purchased this laptop. It is working fine but I want to use Xubuntu on it. I managed to get 10.04 installed and running but it did not recognize/use the wireless card. So I want to try 10.10. However, every time I try, the screen goes black and never comes back on. I have tried the Live CD and Alternate install CDs, for both Ubuntu and Xubuntu 10.10. After I select "Install Ubuntu" or "Try Ubuntu", the screen blacks out and never displays anything. So I deleted "quiet" and "splash" off the command line to see what messages would come up. A bunch of text flies by but it ends at: [time] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [time] TCP bind hash table entries 65536 (order: 8, 1048576 bytes) [time] TCP: Hash tables configured (established 524288 bind 65536) [time] TCP reno registered [time] UDP hash table entries: 2048 (order: 4, 65536 bytes) [time] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [time] NET: Registered protocol family 1 And freezes here forever. I have tried nomodeset, vga=771, and xforcevesa with no progress. Is my video card simply not going to work with this distro? It seems strange that 10.04 would work fine but not 10.10. Any help is appreciated, thank you.

  Read the article

• Wireless on ThinkPad Edge E420s

  - by user21820

  I have installed Kubuntu 11.04 (Natty) on my ThinkPad Edge E420 laptop. Unfortunately, the wireless is not working. I have got Windows 7 installed besides Kubuntu, and wireless is working with no problems there, so it has to be problem of the OS. What I tried: I installed the official driver from Realtek RLT8192CE. After reboot the wireless didn't work, but at least the system was able to detect that it is present in the system. However, after executing lscpi -v, under the card's details there was a line "Currently used driver" which said "r8169". Why is this? I did all of this according to a manual on http://www.php-architect.com/blog/2010/05/01/getting-wireless-to-work-on-lenovo-thinkpad-t400-with-ubuntu-10-4-lucid/. There a meany other similar ones, but don't work for me either. My questions are: 1) Is there any way to get this fixed? If yes, how to do so? 2) Do you think OpenSUSE (or any other distro) is better distribution concerning such hardware issues, so should I give it a try? If yes, which distro gives me the best chance?

  Read the article

• Unity is broken after upgrading to 12.10 (Optimus laptop)

  - by SyS

  I upgraded to GNU/Linux Ubuntu 12.10 but have been unable to use Unity properly afterwards. Indeed, I encountered the exact same problem as a lot of people: the Unity side and top bars are not displaying, although in my case, Unity seems completely broken, as I can't even right-click. However, in my case, it's worth noticing that I have an Optimus laptop with a Nvidia graphics card (GeForce GT 540M). Bumblebee and its 'optirun' command is working just fine, as usual, after the upgrade. I tried several things, as resetting Compiz and Unity (with the command 'setside unity') -- which works but I have to do it everytime I boot and it resets all my settings -- updating/reinstalling/reconfiguring my Nvidia drivers as well as bumblebee, trying with Nouveau drivers instead of nvidia-current, check if linux-headers-generic were installed (they were). However, I couldn't reset xorg.conf files as they're just not there. There is neither xorg.conf file, nor its backup in /etc/X11. I think this is where the problem comes from, although I'm far from an expert. Maybe retrieving a xorg.conf file will fix this mess, but I have no idea how to do that. I'm just tired and don't know what to do. So, here I am, begging for your help.

  Read the article

• Laptop power button not working

  - by DyP

  I have a (seemingly rather exotic) Dell Latitude XT2 notebook running Lubuntu 12.04, fresh install. Tried to get the power button to work as expected (opening lubuntu-logout, just as I think it was meant to be out-of-the box), but no success: power button does nothing but forced power-off on long press. Here some more information, please ask if something more could help: Power button is recognized as a device: xinput lists Power Button as a slave keyboard at /dev/input/event1, and I can run a tool to listen to that device and invoke some action (successfully). But using .config/openbox/lubuntu-rc.xml to assign some action to XF86ShutDown or XF86PowerOff does nothing. Works well for any key of the keyboard. xinput --test reports a keycode (key press, key release) of 124 when pressing & releasing the power button. xmodmap -pk lists 124 mapped to XF86PowerOff which seems correct to me (btw: is this the same as XF86ShutDown?) When assigning another keysymname to the 124 keycode, e.g. 'w', still nothing happens when pressing the power button (no window seems to receive a 'w'). Works well for any key on the keyboard. The outputs of xev for a press/release of the power button irritate me: MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 41, synthetic NO, window 0x2a00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 41, synthetic NO, window 0x2a00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 41, synthetic NO, window 0x0, keys: 93 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (instead of 93, I also get different values) I might have missed something very basic since I'm not very familiar with both openbox/lubuntu and the X input system. Btw.: same goes for three other special buttons on my laptop..

  Read the article

• Laptop, unable to install discrete graphics card GTX 880M

  - by FoxyShadoww

  So I've bought the GT70 2PE Dominator Pro a few weeks ago and I installed Zorin OS 9 Ultimate on it. Today I tried to install the Nvidia drivers on my laptop since it has the GTX 880M, but my system became unbootable. Can anyone help me with this issue? I will write down what I've tried so far. This is what I've tried so far: Downloaded the newest Nvidia drivers from their website. Pressed CTRL+ALT+F2 to open the terminal page thingy. Logged in and got root access. Stopped the lightdm service. Ran the NVIDIA-Linux-x86_64-340.32.run installer. Pressed the accept button and right after that it told me the following message: The distribution-provided pre-install script failed! Continue installation anyway?. When I install anyway, it will crash my system and makes it unbootable, Does anyone know how to use my GTX 880M? Do I need to enable it on boot time somehow? Thanks for the support, Sapphire ~

  Read the article

• Is there any way to facilitate switching windows in Ubuntu?

  - by Ivan

  I'm just a student who received my laptop from my uncle, who's a coder, so I'm still getting used to working with ubuntu. I recently upgraded ubuntu from an earlier version, and everything seems to be pretty great. The only thing is that when I open a program, or file, or whatever, it takes up the whole screen. I can only close it by going to the far top left of my screen, or by ctrl+W. Anyways, I find it really hard to switch between programs. For example I really like to have my windows that are open to be accessible by clicking on their icon at the bottom of the screen... Great when writing or researching. Anyways, I really just want to find an easier way to switch windows. Also, I used to love the way I could cube-rotate my screen, and just drag files from one desktop to another, with compiz. Now, its sort of like flipping a coin when I switch windows, is there any way to get my desktop cube back? And yes, I have enabled all the old settings I used to use with compiz. Sorry if what I'm asking is very basic, I know how to use a computer, I'm just not really familiar with the interface! Any help is greatly appreciated.

  Read the article

• Laptop using 14.04 won't get past login GUI

  - by Dave M G

  My laptop was working perfectly yesterday, and now today I can't log in. At first, I was only getting a black screen. However, after following instructions in some questions here on AskUbuntu, I first reinstalled lightdm, and then I had to change the ownership of the file ~/.Xauthority to be my user name. Now, I get the log in GUI screen. However, once I enter my username, it flickers and then comes back to the login GUI. It does not matter if I use Gnome, Unity, or Gnome-Flashback. I don't know why lightdm needed to be reconfigured, or how ~/.Xauthority got changed, but in any case, what is still standing in my way, preventing me from logging in? Update: I have tried deleting the .Xauthority file, and the .profile files in my home directory. It has not changed anything. Logging in as guest also fails to work. The following commands did not work: mv ~/.config ~/.config.BAK mv ~/.cache ~/.cache.BAK Inside .xsession-errors in my home directory, it says: Gdk-CRITICAL: gdk_x11_display_get_xdisplay: assertion 'GDK_IS_DISPLAY (display)' failed

  Read the article

• How to make the internal subwoofer work on an Asus G73JW?

  - by CodyLoco

  I have an Asus G73JW laptop which has an internal subwoofer built-in. Currently, the system detects the internal speakers as a 2.0 system (or I can change do 4.0 is the only other option). I found a bug report here: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/673051 which discusses the bug and according to them a fix was sent upstream back at the end of 2010. I would have thought this would have made it into 12.04 but I guess not? I tried following the link given at the very bottom to install the latest ALSA drivers, here: https://wiki.ubuntu.com/Audio/InstallingLinuxAlsaDriverModules however I keep running into an error when trying to install: sudo apt-get install linux-alsa-driver-modules-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-alsa-driver-modules-3.2.0-24-generic E: Couldn't find any package by regex 'linux-alsa-driver-modules-3.2.0-24-generic' I believe I have added the repository correctly: sudo add-apt-repository ppa:ubuntu-audio-dev/ppa [sudo] password for codyloco: You are about to add the following PPA to your system: This PPA will be used to provide testing versions of packages for supported Ubuntu releases. More info: https://launchpad.net/~ubuntu-audio-dev/+archive/ppa Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.7apgZoNrqK --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 4E9F485BF943EF0EABA10B5BD225991A72B194E5 gpg: requesting key 72B194E5 from hkp server keyserver.ubuntu.com gpg: key 72B194E5: public key "Launchpad Ubuntu Audio Dev team PPA" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) And I also ran an update as well (followed the instructions on the fix above). Any ideas?

  Read the article

• Crackling sound from right laptop speaker

  - by user1880405

  This problem lasts for several months already (first on Ubuntu 13.10, not on 12.04. I get very loud cracking/popping sound from my right Asus K56C's speaker, I searched everything but could not get rid of it. Several facts: There is no problem on Windows 8. It has nothing to do with applications running because it appears even before login screen of Ubuntu. Also same problem if I boot from Live USB. Muting sound will remove noise, but lowering volume has no effect. Inserting any headphones, removes the noise. If I disconnect power cable while there is noise, noise will always disappear, but only if there is no music playing. If I start playing music, noise again appear even with power cable disconnected. Sometimes that noise disappears for 1-4 weeks, and then again appears for no reason and lasts from several days to weeks. That noise is always the same, and I tried adding tsched=0 to /etc/pulse/default.pa. Also tried this PositionReporting fix, with no effect. I also tried disconnecting all the cables and removing all electronic devices around laptop, but it has no effect. I also tried removing Pulse Audio, didn't change anything. Would be great if someone has some real solution for this problem.

  Read the article

• List of Asus U46 laptop troubles with Ubuntu 12.04

  - by Cybertib

  I've bought my ASUS U46 last february. I would like to make it work better with Ubuntu 12.04. Note taht I was forced to install Ubuntu 12.04 (before its publication) by ethernet. After a successfull install, several problem remain unfixed such as : USB 3 just does not work correctly. Can be fixed, but I didn't succeed yet. Nvidia Optimus (means that you can use Intel Chipset or the Nvidia GeForce) is possible to use thanks to BumbleBee project. It seems to work, though. But Nvidia tools still say they don't see any Nvidia driver installed. Battery duration can be optimised by using Laptop-tools. Any standby state lead to a X server crash. A good CTRL+ALT+F1 login and "shutdown -r" avoids a brutal power off. And since few weeks, I have some bug reports right after boot about "unattended-upgrade", and dpkg troubles after any apt-get install or update (Linux kernel doesn't compile anymore), ... Are there any ways to fix those troubles ? I would need a bit of assistance, in fact. Thank you for you help, Sincerly yours, Thibault

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >