Search Results

Search found 8384 results on 336 pages for 'laptop batteries'.

Page 38/336 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• broadcom 43225 wireless on acer laptop is disabled

  - by Robbie

  I have a acer aspire 5820T with a broadcom 43225 wireless card. I previously used ubuntu 10.10 and the wireless worked straight away, but when I updated to 11.04 the wireless stopped working. I have managed to get the wireless hardware to switch on for a couple of seconds before turning off (When you turn the wireless on using the manual switch the wireless light stays on for a couple of seconds and in the drop down connections menu the information under wireless networks changes from 'device not ready' to 'Disconnected' but shows no wireless networks despite there being one). So far I have tried installing an additional driver, and also disabling the additional driver and installing b43-fwcutter and firmware b43 installer. There may have been other things that I've found in searches that i've tried but unfortunately I can't remember them. Any help would be appreciated.

  Read the article

• Help with putting Ubuntu on an old laptop

  - by alex

  Hi I dusted off an old laptop from 2004 which has Windows XP. I want to put Ubuntu on it. So, I downloaded the CD image and then burnt it to a disc. I tried starting the laptop and booting from CD but no luck. The CD drive doesn't work in the laptop anymore! So I shared the files on the local server and then accessed the wubi.exe file from within Windows XP, and it proceeded to download something else and install. It then asked me to restart, which I did. I now have a folder C:\ubuntu with a bunch of files in it. How do I get the option to boot to Ubuntu? Sorry, I have never installed a Linux variant before! Many thanks

  Read the article

• 13.04 - Extenal monitor plugged on laptop HDMI shows image but lags a lot

  - by Thiago Fassina

  It uses an Nvidia GeForce GTS 250M. When I plug in the monitor, it shows some images but with bad FPS and lagging a lot. For example, when I move the mouse pointer, it leaves a trail that vanishes from time to time. I didn't install Nvidia drivers because every time I did this on past versions I ended up with an unbootable system. On past versions I just gave up trying to use the monitor cause it never showed anything regardless of what driver I installed. But since 13.04 ALMOST made it, I'll make another tries. ps.: Works perfectlty on Windows 7/8

  Read the article

• How to tune touchpad for smaller area?

  - by M.L.

  I just purchased the Asus Zenbook UX31A and I require some advice regarding tuning the touchpad. Basically my problem is that the mouse buttons are withing the touch area and I would like it to be disabled. Such that only part of the touch area is recognized. I have attached an image to clarify the idea. Basically only the red area in the image should be recognized. I have two reasons for this request. Firstly, I like to hold my thumb on the mouse button instead of holding it in the air. This is problematic, because touchpad thinks that I'm trying some kind of two finger gesture all the time and cursor stops moving. Clicking is also problematic since every finger movement -- regardless of how insignificant it might be -- on the "button" will move the cursor. I have been playing with some synclient settings like AreaBottomEdge etc. They have some effect but then I cannot highlight text or right button stops working. How could I solve this?

  Read the article

• issue with older laptops

  - by Adam

  I recently reimaged my Lenovo t400 with Ubuntu. However, after wiping two other systems (Compaq Presario 2100 and Dell Latitude D600) both hUbuntu 11.10 and Ubuntu 12.04 fail to load on boot. I am concerned that there is some type of issue using Ubuntu on these older systems as every part of the process has been repeated/attempted several times in the same manner as practiced in the successful load of the newer Lenovo t400. I now have two laptops without an operating system as the discs/thumb drives that were formatted to load on these devices do not seem to work. I would appreciate any assistance that you may be able to provide. Regards, -Adam

  Read the article

• How to compile Asus-syntec-webcam-driver stk11xx

  - by berot3

  i have asus v1s and some time ago i was able to easily compile and install it. but now compiling fails... i hope u guys know what i can do, if there is anything that can be done... after svn checkout https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver syntekdriver and cd ./syntekdriver/trunk/driver as well as make -f Makefile.standalone i got: make -C /lib/modules/2.6.36.2/build SUBDIRS=/home/berot3/syntekdriver/trunk/driver modules make[1]: Betrete Verzeichnis '/usr/src/linux-headers-2.6.38-8-generic' CC [M] /home/berot3/syntekdriver/trunk/driver/stk11xx-usb.o CC [M] /home/berot3/syntekdriver/trunk/driver/stk11xx-v4l.o /home/berot3/syntekdriver/trunk/driver/stk11xx-v4l.c:43:28: fatal error: linux/videodev.h: File not found! compilation terminated. make[2]: *** [/home/berot3/syntekdriver/trunk/driver/stk11xx-v4l.o] Error 1 make[1]: *** [_module_/home/berot3/syntekdriver/trunk/driver] Error 2 make[1]: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.38-8-generic' make: *** [driver] Error 2 same for http://bookeldor-net.info/merdier/Makefile-syntekdriver http://webcache.googleusercontent.com/search?q=cache:OM0zVNlYiVQJ:bookeldor-net.info/merdier/Makefile-syntekdriver+http://bookeldor-net.info/merdier/Makefile-syntekdriver&hl=de&strip=1

  Read the article

• 3D physics engine for accurate collision handling on desktop/laptop computers (non-console)

  - by Georges Oates Larsen

  What are your suggestions for a physics engine that satisfies the following criteria? Capable of calculating collisions between multiple concave mesh-based colliders Handles many collisions going on at once (for instance one mesh being wedged between two others, which themselves may be wedged between two meshes) Does not allow for collider passthrough, even at high speeds. For instance, if I am applying force to a programmatically hinged object that makes it spin, I do not want it to pass through another rigidbody that it collides with while spinning. I have this problem using PhysX As implied before, reacts well to hinged objects, preferably has its own implementation of a hinge, but I am willing to program my own. The important part is that it has some sort of interface that guarantees accurate collision tracking even when dealing with these things Platform independent -- runs on mac as well as PC, also not tied down to specific graphics cards I think that's the best way to explain what I am looking for. Basically, I need SUPER reliable collisions. Something that can't be accomplished with a simple ray casting approach that sends a ray from the last position of the object to the current position (as this object may be potentially large and colliding with small objects via rotation) Bonus points for also including an OPEN SOURCE engine.

  Read the article

• Traveling With Laptop

  Laptops are great, especially if your business requires frequent traveling or if you simply cannot leave your home without your computer for one reason for another. "Laptops are great, especially i... [Author: Jeremy Mezzi - Computers and Internet - May 29, 2010]

  Read the article

• Ubuntu Workstation

  - by John Smith

  I bought a dell inspiron n5110 hoping that i'll be able to use it fine with Linux; however i couldn't install the video card drivers and in 8 months the motherboard burned because the power management wasn't right and it was overheating. I want to buy a workstation pc that works with ubuntu. Does anyone have any suggestions? I'd like to have the videocard and all other hardware to be used properly Thank you

  Read the article

• How to get "Fn" keys to work (Asus 4830T)? (specificly, the "suspend" key)

  - by Pointy

  I've got an Asus 4830T onto which I've just re-installed 12.04 because I installed an SSD. I was running 12.04 before too, which had been upgraded over a few releases. At some point on that old install, I had gotten all the "Fn" keys to work, or at least all the ones I cared about. (Oh except I think the screen brightness keys never worked.) I have no recollection of what I did. Anyway now things are fine, and some of the Fn keys work: the one to turn of the trackpad and the one to turn off wireless (grr I hate that one). However, the "suspend" key for some reason does not work. Now the system will suspend and resume just fine, but I'm having to do it from the menu. Is there an easy (or hard) way to make those work? I'm running straight Ubuntu but with Xfce installed as my normal desktop. (In other words, it's not Xubuntu, though I doubt it matters.) I recall at some point having found some arcane mapping mechanism to bind the Fn keys to actions, but I can't find it now. (I'm perfectly OK with editing weird files; I'm a long-time Unix user.) (Very long-time.)

  Read the article

• Intermittent sound on an Medion Akoya S5610

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• My laptop suppose to have 6 GB ram but it's only 2 GB installed

  - by monablo

  My laptop is supposed to have 6 GB ram but it only detects 2 GB of it, so I don't know what to do. I searched the web for answer and what i get that there's 2 possible problem: 1- That 4 GB ram card is broken and not working 2- or the 2 ram card have a different path so the windows chose the path of the smaller ram card which would be the 2 GB ram I don't know what is the path in first place so I really don't know what to do. How would I troubleshoot, and work out why the 4 GB stick is not being detected? My laptop's specifications are as follows: Windows 7 Home premium 64- bit Operating system processor : intel (R) core(TM) i7 CPU Q740 @1.73 GHz 1.73GHz installed memory(RAM) : 2.00 GB (but it suppose to be 6 GB -_- ) My laptop is Dell and it's Model N5010

  Read the article

• Can I install an Ubuntu app from remote laptop?

  - by Voidcode

  Is their a way to push/send and ubuntu-app/deb-file to be install on my Ubuntu laptop? Usecase... Laptop 1. I find an app, I need to install! But I´am not at home. I just push it to my other laptop to be install.. Laptop 2. I am now at home. My laptop 2 view an dialog asking to install the app I send from laptop 1. Can this be do?.. SSH? Question-update Can it be done so it open Ubuntu Software Center and then laptop2-user only need to write their password and press ok? for non-tec users.. like my father...

  Read the article

• How to control fan speed using SpeedFan?

  - by John Young

  The CPU fan in my laptop is running too fast. I wish to control the speed manually to my preference, at times. Here is a CPU-Z screenshot of my laptop configuration: http://i.stack.imgur.com/1oST1.png And here is how SpeedFan window looks at my end: http://i.imgur.com/BIi0RdJ.jpg I have no idea how to use SpeedFan to control my laptop's CPU fan speed. How to configure it so that I can increase and decrease speed of the fan at my will? Edit: Sorry, the first image wasn't as intended, so I've corrected it now. Also, if someone can edit the post and embed the images in the post, that would be great. I need at least 10 reputation to successfully accomplish that.

  Read the article

• Add SATA Port to Motherboard?

  - by YAS

  I recently took off the bottom covers to my laptop, an Aspire 6930, and one of the covers was hiding an empty space large enough for a second hard drive. The bit of motherboard that was showing had the solder joints for a SATA port, but no port. What I'm wondering is; If I get a spare SATA port and solder it in would it mess up my motherboard and kill my laptop? I'm not concerned about a clean solder job, I can do that. But if the port is soldered in cleanly if there would be any danger to doing it. It'd be pretty darn awesome to get a second hard drive in my laptop.

  Read the article

• HP DV6 connects but no internet

  - by Frank Barcenas

  I have a Hewlett Packard DV6. I connected to the access point. I receive an IP address/default gateway/DNS,etc(DHCP). I cannot ping my gateway. DNS lookups fails. There is just no connectivity. My driver is listed as being IWLWIFI. An lspci shows my card to be a Realtek RTL8101E/RTL8102E. I can't ping myself from another computer. eth0 Link encap:Ethernet HWaddr c8:0a:a9:0c:a7:45 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:41 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:561 errors:0 dropped:0 overruns:0 frame:0 TX packets:561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42164 (42.1 KB) TX bytes:42164 (42.1 KB) wlan0 Link encap:Ethernet HWaddr 00:26:c7:04:97:c0 inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:c7ff:fe04:97c0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:71 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2035 (2.0 KB) TX bytes:12371 (12.3 KB)

  Read the article

• Network disabled on some wake-ups on saucy laptop

  - by Arild

  Since I upgraded to Saucy Salamander 13.10, with every third suspend or so, the network is disabled and I'm unable to re-enable it. I've had to reboot to make it run again. The network menu will have the option Enable network but clicking it will only produce a tick in the menu item, nothing else changes. How can I make it enable automatically after suspend? In the meantime, is there a workaround to at least manually re-enable it? The PC is a Lenovo IdeaPad S205 using drivers r8169 and rt2800pci.

  Read the article

• Speaker Prep Tip: Use the AV Studio Built into that Laptop

  - by merrillaldrich

  Over at erinstellato.com there is a great post this week about tips for new presenters. Ms. Stellato suggests, insightfully, that we record ourselves, which is really a fantastic piece of advice. What’s extra-cool is that today you don’t need any special equipment or expensive software to do just that. This week I “filmed” two run-throughs of my talk for SQL Saturday tomorrow. For me, the timing is the hardest thing – figuring out how much content I can really present in the time allowed without...(read more)

  Read the article

• Laptop's battery is stuck on "estimating"?

  - by xd1936

  Hello! After installing Ubuntu 10.10, the battery indicator worked fine (both percent remaining and estimation on time). I then installed and configured some software (Skype, Pidgin, Thunderbird, removed Empathy and Evolution, ect) and the battery meter, when clicked, always says "(estimating...)" I've tried running the battery down to zero and charging it fully again. If I go into the history or details, the percentage is recorded correctly. Any ideas?

  Read the article

• Problems after resuming from hibernate

  - by ACC

  I have a problem with maverick when resuming from hibernate. Here's a screenshot: Also I'm getting the following errors before the screen appears: *ERROR* render ring head not reset to zero ctl 00... *ERROR* render ring head forced to zero ctl 00000... I tried upgrading to PPA kernel to 2.5.36 and 2.5.37 beta but the problem persists. I have a vaio notebook with an intel graphics card 4500mhd. Anyone knows of a fix?

  Read the article

• Wireless slow, but very odd

  - by Logman

  I have a HP Pavilion dv6 laptop, internet through the wireless timeouts. Even though it connects fine to the AP/router. The computer had a virus (searchnu?) and I backed up the usual and restored the laptop to factory image. Problem is after the restore the internet through the wireless the same still... and connected via wired and everything worked fine. I was able to update the whole system. Internet worked perfect, speed great. But the wireless still was pitiful. Ping tests with wireless are interesting: Google= 18ms Gmail= 18ms Yahoo= 1023ms 8.8.8.8=30ms Microsoft= Request Timed Out Bing= Request Timed Out msn= Request Timed Out even though I get 18ms with google, the pages take a long time to load. Is this a root kit? is it the wireless card in the laptop?

  Read the article

• Running ubuntu 10.04 without a laptop's primary display

  - by riteshmnayak

  I have an IBM thinkpad(R50e) whose display is broken. I would still like to use the laptop by connecting it to an external monitor and keyboard/mouse. This is what I did: Removed the hard disk from the broken IBM Put the hard disk in the working IBM and installed 10.04 on it. It booted fine and I installed many packages and stuff. I put the hard disk back into the broken display IBM thinking I could use it by connecting it to an external monitor that I own. Well, it turns out that while booting, the display shows up but because the display shifts from the VGA display to the primary display mid-boot, the laptop does not boot. Is there a way in which I can force the laptop to not use its primary display while booting. I looked at Randr and also grub.conf settings but nothing seemed to work. Please help!

  Read the article

• Touchpad won't work/not recognized on laptop, Ubuntu 11.10

  - by The_McManus_Position

  When I start out running 11.10 (Ocelot) from the Live CD the touchpad works with no problem. Once installing however the touchpad does not work at all. I have installed all updates available. I have tried installing the synaptiks touchpad package and the gpointer package from the software manager, this did not help. Under System Settings - Mouse and Touchpad there is only a mouse tab, no touchpad tab. It seems my touchpad is not even recognized. I have tried running several things in the terminal that I have found under similar questions, but I always get errors about the files not being found, or the drivers not being found. Have tried: sudo modprobe -r psmouse sudo modprobe psmouse proto=imps This results in an error message. dconf-editor Can load the GUI, but after that I can't seem to navigate through it to find the files that need editing. Read what's listed here. But I've got no GRUB, running only Ubuntu. As you can see I've been trying several things and nothing has worked so far, would appreciate any help. Thanks!

  Read the article

• Intermittent sound

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• install lync 2010 client on home laptop

  - by user330026

  I have work laptop and lync is running there no problems. I installed vpn on my home laptop and outlook connected through vpn no problems. But when I install lync 2010 client and put the same settings as work version. It was on autodiscovery and I used the same userlogin it does not work. Is there any way to find out from my work laptop what configuration lync uses there and replicate it on home. I spend hours finding solutions and could not find anythigng. I can't ask IT. Anyone can advice anything, thanks

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >