Search Results

Search found 14216 results on 569 pages for 'nvidia settings'.

Page 34/569 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • LCD monitor reports incorrect maximum resolution

    - by SLaks
    I have four 20" Planar 2010M LCD monitors with a maximum resolution of 1600 x 1200 connected to two nVidia video cards (8600 GT and 7600 GS). I'm running Windows Server 2003 x86. Recently, two of the monitors have started mis-reporting their maximum resolution as 1280 x 1024. When this first happened, I used nVidia's Custom Resolutions feature to force the monitors back to 1600 x 1200. Yesterday, however, I upgraded nVidia's video card driver, and ever since, I cannot get the DVI one back to 1600 x 1200. When I add the custom resolution in nVidia's control panel, if I set either the width or the height to even a single pixel more than 1280 x 1024, nothing changes when I click Test (the monitor doesn't even flash black, although after 15 seconds, it flashes black and doesn't change). After adding Does anyone know what the problem is? Is there anything I can do about it?

    Read the article

  • how to reset monitor display settings

    - by vector
    On Ubuntu 12.4 laptop with Gnome desktop, I tried to set an additional display through Catalyst (administrative) and slowly ended up making making a mess out of the whole thing. I tried several combinations of settings and at each iterration I just made things worse, ending up with 'mail battery sound time user power' icons repeating on the top bar. Now I'm lost as to how to restore everything to default settings.

    Read the article

  • Is there a way to run CUDA applications with the CUDA device being a secondary adapter?

    - by Slartibartfast
    I've been trying to run a CUDA program on a remote computer which has Windows 7 installed. The GPU is GeForce GTX 480. One of the problems I've been facing is that, the computer has two adapters, 1) Standard VGA Adapter 2) NVIDIA GeForce GTX 480 Even though this shows in the device manager. The desktop uses the standard VGA Adapter. I'm assuming this is because the Standard VGA is the primary adapter. Also the device manager shows that the monitor is connected to the standard VGA Adapter. In this scenario if i try to run any CUDA application it fails to recognise a CUDA capable device. Is it necessary for the NVIDIA adapter to be the primary one? Or is there any way to use CUDA when the graphics card is a secondary adapter. I've seen a few posts in the NVIDIA forums on this before, one suggests using another low cost NVIDIA card as the primary adapter, but that is currently not an option. I couldn't find any other solutions. Thanks I tried running the deviceQuery test from the NVIDIA GPU Computing Samples. This was the result i obtained CUDA Device Query (Runtime API) version (CUDART static linking) cudaGetDeviceCount FAILED CUDA Driver and Runtime version may be mismatched FAILED The driver version I'm using is 263.06. The CUDA version is 3.2 I ran the same test on my desktop which also has windows 7 and a GeForce GTX 465. The CUDA toolkit version is 3.2. The driver version was the same and the test passed, although it failed with an older driver.

    Read the article

  • multithreading problem with Nvidia PhysX

    - by xcrypt
    I'm having a multithreading problem with Nvidia PhysX. the SDK requires that you call Simulate() (starts computing new physics positions within a new thread) and FetchResults(waits 'till the physics computations are done). Inbetween Simulate() and FetchResults() you may not 'compute new physics' It is proposed (in a sample) that we create a game loop as such: Logic (you may calculate physics here and other stuff) Render + Simulate() at start of Render call and FetchResults at end of Render() call However, this has given me various little errors that stack up: since you actually render the scene that was computed in the previous iteration in the game loop. I wonder if there's a way around this? I've been trying and trying, but I can't think of a solution...

    Read the article

  • 3+ monitors, nvidia + intel graphics

    - by gozzilli
    I have seen lots of different posts on this issue, but I cannot figure out what to do. I hope we can collect the available information in one place, so that they can be useful for others. Is it possible to have multiple (3+) monitors running on two different graphics cards? I have 1x nVidia GeForce GTX 550 with 2 DVI ports and 1x Intel integrated graphics, with 2 DVI ports. I understand that they would be running on different instances of X servers. Is that correct? Could someone point me in the right direction to start? On Windows it's so simple, there is no additional thing to do other than going in display preferences and activating all 3+ monitors. They can even be laid out alternating one monitor from one graphics card with another monitor from the other card.

    Read the article

  • Sound works but cannot change settings or volume

    - by W. Conrad Walden
    Volume is always on max. The volume indicator is showing three dashes and does not show anything when I click on it. Clicking the "sound" button in settings causes it to recursively reopen settings. pulseaudio --start doesn't help. EDIT: This has only started happening after the upgrade to 13.10 EDIT 2: This is in Unity, yes. EDIT 3: killall unity-panel-service works and does reload the panels, but previous problems persist.

    Read the article

  • What are the ideal settings for a Belkin WiFi Router to connect to an iPhone? [closed]

    - by user34833
    The Belkin Router (F5D8235-4 v2000) has numerous options in the setup. These are the current settings: Wireless On SSID Buster's Special Security Type WPA Encryption Type TKIP WLAN MAC Address 00:22:75:B3:58:38 WPS Enabled Guest Access Disabled SSID Belkin_N+_Guest Password/PSK NotThatSillyYet :) The iPhone is a 3g with 16GB it has no problems connecting to public networks like libraries or restaurants. But currently it won't connect to my home WiFi. Thanks for your time and help. Paul

    Read the article

  • Anyone know how to get dual screens working on a Dell E6410 laptop with Ubuntu 10.04 64 bit?

    - by Curtis
    I've installed the drivers from nVidia. When I go into the NVIDIA X Server Settings application, in the X Server Display Configuration setcion, and click the "Configure" button, "TwinView" is disabled. Also, clicking "Detect Displays" doesn't pick up my monitor (which is connected through a port replicator - keyboard and mouse in that port replicator work fine). Has anyone else seen this? Is this just a limitation of the current nvidia linux drivers?

    Read the article

  • How do I restore system default settings on Linux Mint KDE?

    - by Robert Kelly
    I did something weird and now my text size is like 3pt on every system window, but when I go in and change my window fonts to larger to something that looks normal, it makes my clock, bash, and other fonts absolutely gigantic. Is there any way I can just roll back my system and it's settings? It wouldn't be much bother as I installed the OS yesterday. I'd hate to have to reinstall entirely though, but I guess it's an option.

    Read the article

  • Evolution sending Email Settings

    - by Jack
    Can receive Comcast mail with evolution but cannot send. The SMTP settings record more digits when clicking the Server Configuration apply key. Sending ([email protected]:tenz222) port587 After clicking apply, receive a "Error while sending message" host lookup failed etc When rechecking,the sever settings are, ([email protected]%253atenz222) Attempted this process many times with same result. Now need to be proactive and ask for help. Will phone for help anywhere, anytime in USA. Thanks

    Read the article

  • Ubuntu 12.04 forgetting XModmap settings often

    - by PKKid
    I have the following contents in my ~/.Xmodmap file. It seems a couple times a day (without rebooting or logging out) I need to rerun the command "xmodmap ~/.Xmodmap" to reset my settings. The only thing I can think is that it seems to happen when I walk away from my computer for a bit. Maybe it forgets the settings when the computer locks itself? remove control = Control_L remove mod1 = Alt_L keycode 64 = Control_L keycode 37 = Alt_L add control = Control_L add mod1 = Alt_L Anyone else seeing similar issues?

    Read the article

  • Attach Keyboard/Mouse to X Display in Dell XPS L502x Dual Video Cards (Intel/Nvidia HDMI)

    - by lcoronelp
    The idea: Use a second monitor in Dell XPS L502x with HDMI port in Ubuntu 12.04 The process: I connect the HDMI cable to monitor. I read this and I have video in HDMI monitor with Bumblebee and this commands: optirun nvidia-settings -c :8 DISPLAY=:8.0 firefox I have created a second keyboard/mouse master group with xinput with this solution. The problem: The second monitor (Display 8) doesn't recognize the keyboard/mouse and I cant use it. The question: Do you know some command to attach the keyboard/mouse master group to Display 8? I think that xinput -set-cs may work but it does not.

    Read the article

  • System Settings and Software Center does not pull up after fresh install 11.10 amd64

    - by hydroparadise
    I've had a few install rounds with ubuntu ever since 8.04 and has worked flawlessly every time. However, for some reason, when I try to click either System Settings or Software Center, the icon pulses as if it were working to come up but never does. The same goes for System Settings. I would expect that a password dialog would appear, but nothing shows. Is there bug with 11.10 that didn't exist with 11.04?

    Read the article

  • 3dmark score abnormal

    - by Sean
    I just bought a new laptop. It is core i7 3610QM.(Ivy bridge, 4 core plus hyperthreading), 8G ram, nvidia GT 610M 2GB. The OS is Win7 64bit. I ran 3dmark 11, but the score is frustrating. For 1280*720, the score is P730. It is too low right? I searched online, the score should at least above 1000. Am I right? I never use this software before. I know nvidia has optimus, so I made the laptop in high performance state and white-listed the 3dmark program. But there is no help. I am guessing 3dmark is using i7's graphic module. It cannot transform to nvidia. In the running detail of 3dmark, the graphic card cannot be identified(The row remain blank). Can anybody tell me is this the normal case? If not, can I use some other software to test if my nvidia card is working fine? If this nvidia card cannot work, I will return the new laptop asap. Thanks.

    Read the article

  • How to Document and Configure SQL Server Instance Settings

    Occasionally, when you install identical databases on two different SQL Server instances, they will behave in surprisingly different ways. Why? Most likely, it is down to different configuration settings. There are around seventy of these settings and the DBA needs to be aware of the effect that many of them have. Brad McGehee explains them all in enough detail to help with most common configuration problems, and suggests some best practices.

    Read the article

  • Garbled screen after sleep/suspend with nVidia 8800M GTS Ubuntu 11.10

    - by user34062
    Just did a clean install of 11.10, have been using it (and enjoying it!) for about a day now. But it seems that every time I resume from a sleep or blank screen after idling for a while, my desktop, as well as any programs on the screen get "garbled" I had a few windows open and all displayed the same gui glitching except for Chromium (I am guessing because it was minimized to the Unity Launcher, and not currently on the screen when I woke the PC up.) Anyone know what might be causing this, and how I might be able to fix it? I am using a Gateway P-6860FX with a C2D 1.8GHz, and nVidia 8800M GTS 512mb. Screenshot: http://dl.dropbox.com/u/28188839/Screenshot%20at%202011-11-15%2018%3A53%3A25.png NOTE: Yes, I know I misspelled Lothlorien.... .<

    Read the article

  • My screen is messed up, using GeForce 8400 GS NVIDIA

    - by Ask Me
    My screen is all messed up. I can see everything beside my start menu and when I scroll up the mouse arrow goes up and out of the screen. It's not normal. Do I need to install "GeForce 8400 GS NVIDIA" drivers on my Ubuntu 12.10 32-bit machine? Please be very patient with me and use very simple words that a simple newbie could understand. I am very very new to this OS and I don't know much of the Ubuntu/Linux terminology. Thanks guys, stay blessed.

    Read the article

  • no hdmi sound on Ubuntu 12.04 LTS

    - by bart
    i'm very new to ubuntu/linux. I installed Ubuntu 12.04 LTS on my vista laptop (nvidia gpu) in dual boot and with some help of google i'm almost ready to go. The only thing that i can't figure out is how to play sound trough my hdmi connected to my tv. Speakers of the laptop are ok, in te sound settings i can see -hdmi -digital -speaker outputs. The top 2 won't play sound so i googled around, found a bunch of things to try but the only thing succesfull so far was to erase all the drivers from the audio settings and they stayed gone. So finally i re-installed from scratch but still no sound trough hdmi. Re-installed 6times in the last 3 days now so the only thing left for me is reaching out for help/advice about this. How can i play sound on my tv connected with hdmi? I will be glad to give more info if needed cuz this is driving me crazy, thanks for your help in advance ! Bart.

    Read the article

  • Asus N46VZ prouduces more heat when on ubuntu compared to windows

    - by Blaze Tama
    First, i just used ubuntu as my main operating system, so please bear with me. My Asus N46VZ temps is pretty high when im on ubuntu (13.10). The temps are 60C even though i just open a browser. This does not happened on windows, where the temps is just around 50C. I did some research and some people said that the problem might be on my graphic card. I have an intel HD 4000 and GT 650m. So i tried to check my system settings and it said im using "Intel® Ivybridge Mobile". So, i tried to check the "additional drivers" tab on software & update settings but i found nothing there. The point is, i still dont know what make my laptop "overheating". The VGA part is just my guess (and is still dont understand what is the correlation between my VGA and the heat, and everything except the temp seems fine). Any help is appreciated. Thanks for your help :D

    Read the article

  • Why does Unity not extend to my 2nd monitor, even when it is displaying an X-Screen?

    - by Gridwalker
    I recently added a 2nd video card to my system, but unity refuses to extend my desktop over to the second screen. Although the secondary monitor initialises when I boot and I can move the mouse cursor over to the 2nd screen, the screen is otherwise blank (showing no wallpaper or interface elements) and I am unable to move any windows to this monitor. Moving the mouse cursor over to the 2nd monitor changes it from the default cursor to the old-style X cursor, such as the one that appears when you run X-kill, indicating that this screen is initialised in the X Server but that Unity is not recognising it. Although the Nvidia X Server Settings application can see both monitors, the unity systems settings application does not detect the 2nd adapter. Sometimes the additional drivers application can see both adapters, but it doesn't consistently show options for them both. Xrandr also fails to detect the 2nd monitor, but iNex lists both adapters. I have experimented with several different drivers for each adapter and with setting each of the graphics cards as the primary adapter in the BIOS, but this has made little difference. The two adapters are an onboard Geforce 8200 and a PCIE Geforce 7200 GX. The onboard adapter is currently set as the primary, however this adapter crashes whenever I use the Nouveau driver and I have to switch over to the PCIE as a primary whenever I purge the proprietary drivers (switching back when the 304 driver has been reinstalled). It doesn't matter which adapter I set as my primary, the results are the same : one screen showing the unity interface and one screen showing an X-Screen that only displays the mouse cursor. All I want is to be able to run this system in a dual screen configuration. I am not a gamer, nor do I require 3D rendering capabilities. Anything you can suggest to get the desktop to extend across both screens will be massively appreciated!

    Read the article

  • Plymouth and GRUB do not show at all

    - by WarriorIng64
    I am using Ubuntu 11.04 64-bit as my only OS on my desktop computer, which used to only run Ubuntu 10.04 LTS until I had the time to upgrade it with a fresh install. It uses integrated NVIDIA graphics (listed as a GeForce 6150SE nForce 430 by the NVIDIA X Server Settings utility) with the current proprietary driver as provided by the Additional Drivers utility, and has a VGA connection to a 1680x1050 Acer monitor. I used to get the (ugly-looking version of) Plymouth graphical boot screen while under 10.04. It didn't look that great, but I was fine with it. Now, it doesn't show on 11.04 at all during boot (I just get an error message in a moving gray box from the monitor saying "Input Not Supported"), and only rarely it will show on shutdown, all garbled up. I could not get GRUB to show during boot while holding down Shift, either (same error message), but pressing Enter while it should be up starts the system normally. A picture of the error message I was getting: Once fully booted, the system still shows the login screen and desktop just fine. Any information on how to troubleshoot this would be appreciated. If there's any hardware-specific stuff I forgot to include here, let me know the relevant commands to run in a comment below. Things that I've tried: Running plymouth in a framebuffer: no effect Booting with nomodeset as my grub boot: option no effect Booting with nomodeset and plymouth in a framebuffer: no effect other than Plymouth showing during shutdown only Following the Softpedia instructions for fixing Plymouth's resolution: Problem mostly solved, except logo does not show in Plymouth during boot, and both grub and Plymouth are slightly off-center #4 above, but with nomodeset removed as a grub boot option: same effect as #4 #5 above, but with vt.handoff=7 added as a grub boot option: same effect as #4 I have added the current contents of /etc/default/grub as requested in the comments: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1280x1024 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" CURRENT STATUS: I forgot to uncomment one line as per "things that I've tried" #4, so I took care of that. I can now see GRUB during startup when I hold Shift and a normal-looking Plymouth during shutdown...but Plymouth during boot is now just a solid purple screen. In each case, it's displayed a little off-center to the left, with a thin black bar running down the right side of the monitor. The error pictured above no longer shows. I'd say this problem is about 2/3 solved now. UPDATE: After Natty started freezing up on me, I decided to dual-boot with Oneiric, which unfortunately shows the same problems. Rather than trying all these workarounds though, I decided to do what I should have done from the start and file a pair of bug reports. LAST UPDATE: Bug 850908 has been confirmed as a legitimate nouveaufb bug. I have overwritten my 11.04 partition with 12.04 LTS, and I can confirm at this time that the issue is present there, as well. I will now flag this question to be closed, yet I hope it was helpful for anyone who experienced similar issues; if you are still having the same problem as me, please go there and mark yourself as affected. Thanks!

    Read the article

  • How do I get sound output on HDMI without the need to start X?

    - by Magnus Hoff
    I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

    Read the article

  • How can I make sound work without starting X?

    - by Magnus Hoff
    I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

    Read the article

  • Could not import Django settings into Google App Engine

    - by gkelsall
    Hello all you Google App Engine experts, I have used Django a little before but am new to Google App Engine and am trying to use it's development web server with Django for the first time. I don't know if this is relevent but I previously had Django 1.1 and Python 2.6 on my Windows XP and even though I have uninstalled Python 2.6 there is still a folder and entries in the registry. I have followed the instructions from Google but when I browse to the GAE developemnt web server it cannot find my settings (details below). Any hints gratefully received. Regards Geoff C:\Documents and Settings\GeoffK\My Documents\ing\ingsite>echo %PATH% C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS \system32\WindowsPowerShell\v1.0;;C:\Python25;C:\Python25\Lib\site- packages\django\bin;C:\Documents and Settings\GeoffK\My Documents\ing \ingsite;C:\Program Files\Google\google_appengine\ C:\Documents and Settings\GeoffK\My Documents\ing\ingsite>echo %PYTHONPATH% C:\Documents and Settings\GeoffK\My Documents\ing\ingsite C:\Documents and Settings\GeoffK\My Documents\ing\ingsite>C:\Documents and Settings\GeoffK\My Documents\ing\ingsite>dev_appserver.py -- debug_imports ingiliz\ INFO 2009-08-04 07:29:45,328 appengine_rpc.py:157] Server: appengine.google. com INFO 2009-08-04 07:29:45,358 appcfg.py:322] Checking for updates to the SDK. INFO 2009-08-04 07:29:45,578 appcfg.py:336] The SDK is up to date. WARNING 2009-08-04 07:29:45,578 datastore_file_stub.py:404] Could not read data store data from c:\docume~1\geoffk\locals~1\temp \dev_appserver.datastore WARNING 2009-08-04 07:29:45,578 datastore_file_stub.py:404] Could not read data store data from c:\docume~1\geoffk\locals~1\temp \dev_appserver.datastore.history WARNING 2009-08-04 07:29:45,608 dev_appserver.py:3296] Could not initialize ima ges API; you are likely missing the Python "PIL" module. ImportError: No module named _imaging INFO 2009-08-04 07:29:45,625 dev_appserver_main.py:465] Running application ingiliz on port 8080: http://localhost:8080 ..... Now attempting to browse if need more detail here I can post ..... if not settings.DATABASE_ENGINE: File "C:\Python25\lib\site-packages\django\conf\__init__.py", line 28, in __ge tattr__ self._import_settings() File "C:\Python25\lib\site-packages\django\conf\__init__.py", line 59, in _imp ort_settings self._target = Settings(settings_module) File "C:\Python25\lib\site-packages\django\conf\__init__.py", line 94, in __in it__ raise ImportError, "Could not import settings '%s' (Is it on sys.path? Does it have syntax errors?): %s" % (self.SETTINGS_MODULE, e) ImportError: Could not import settings 'settings' (Is it on sys.path? Does it ha ve syntax errors?): No module named settings INFO 2009-08-04 07:31:02,187 dev_appserver.py:2982] "GET / HTTP/ 1.1" 500 -

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >