Search Results

Search found 14216 results on 569 pages for 'nvidia settings'.

Page 30/569 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Dual monitor, with a low resolution projector

  - by user900978

  I need to show a presentaion to a conference tomorrow. Today I tryed my Ubuntu 10.04 with the projector. My notebook has a resolution of 1440x960, the projector seems to have a really lower resolution. However, thanks to nvidia-settings I configured my video card (a nvidia 9800), it works with other display, but not with the projector. I found the projector, configured as Twin-view, resolution Auto and pressed on Apply, then "Save to x Configuration". On projector is visualized just a quarter of my notebook display. I tryed also to reduce my resolution and to change the resolution of projector, but I obtained no better results. How can I Solve it? On windows all goes well, but I need Ubuntu for personal reasons. Thanks in advance

  Read the article

• Compiz runs almost at 100% and the system is slow, what can I do?

  - by Heiner Valverde

  My system became very slow out of the sudden, yesterday Compiz was running extremely smooth, today it started working very slow and slowing the computer. What I've done so far was to resize my swap partition to 6 gigabytes (my computer has 3 gigabytes of RAM), before it was on 5.1 gigabytes, so I though that was the reason of this but still not. Also I tested running only metacity by running metacity --replace and also with Mutter. With metacity works really great no problem but, in the other hand, with mutter the computer works slower than running compiz instead. I am using the Nvidia driver version 173.14.28 and my X Server version as reports the NVidia X Server Settings is the 11.0. My Linux kernel running on this computer is 2.6.35-25-generic and my ubuntu version is 10.10. Any help will be appreciated.

  Read the article

• 13.04 - Extenal monitor plugged on laptop HDMI shows image but lags a lot

  - by Thiago Fassina

  It uses an Nvidia GeForce GTS 250M. When I plug in the monitor, it shows some images but with bad FPS and lagging a lot. For example, when I move the mouse pointer, it leaves a trail that vanishes from time to time. I didn't install Nvidia drivers because every time I did this on past versions I ended up with an unbootable system. On past versions I just gave up trying to use the monitor cause it never showed anything regardless of what driver I installed. But since 13.04 ALMOST made it, I'll make another tries. ps.: Works perfectlty on Windows 7/8

  Read the article

• nouveu driver logs into unity-2d by default

  - by Ubuntuser

  I have an old system with NVIDIA Corporation NV25 [GeForce4 Ti 4600]. When running Ubuntu , the nouveau driver loads fine but does not log into Unity with compiz. Instead it logs into Unity-2D. Any idea how to enable 3D/ compiz with the nouveau driver. OS: Ubuntu 12.04 Beta2 The nvidia driver is no more available for this graphics card, so have to rely on nouveau. UPDATE: Bug reported on launchpad . See here. There has been no reply as yet to this bug-report - does anyone have any idea how to resolve this? Further information, Also, if I use kubuntu desktop, kwin graphics works just fine. But, the users prefer Unity over KDE so I have uninstalled Kubuntu.

  Read the article

• Can I use HDMI with the Intel card of my optimus laptop?

  - by Byakkun

  I have an Dell Inspiron 7110 that has a Sandy bridge i7 and a discrete graphics card (GeForce 525M) from Nvidia. I want to be able to use my 23' display at home throungh hdmi but Intel integrated graphics card does not work with hdmi (VGA is not an option). I have tried bumblebee but it does not work. How could I use the hdmi port for my monitor. Using only the nvidia card with some driver is what I tought i could do but i don't want to give up composing because I use gnome-shell. Any options for doing this?

  Read the article

• How do i fix the slow scroll in browsers and high XOrg cpu usage

  - by Virgil

  I am facing an issue while scrolling in browsers(firefox, chrome, and opera) , scroll is jagged and slow. Also when scrolling the cpu usage spikes. I am currently running ubuntu natty(beta 1), switched from ubuntu 10.10 where the problem was worse. I am using the nvidia beta driver, which ubuntu installed automatically. My graphic card is nvidia Quadro NVS 150M. I tried running ubuntu without the effects on , but when using multiple applications at the same time xorg usage spikes again. Additional info: 2GB of RAM and an intel core 2 duo processor. Any help would be greatly appreciated. Thanks in advance!

  Read the article

• Only one resolution available in Xorg.conf

  - by Kévin Guilbeault

  I recently upgraded to Ubuntu 12.10 and when I try to change my resolution in NVIDIA X server settings, I only get the native one (1600x900). When I had 12.04 installed, all resolutions were available in the drop down list. My goal is to have twinview working again. I used to set my two screens to twinview and clones, using my HDTV resolution (1360x768) which was previously available in 12.04 for my laptop screen too. In 12.10, I tried to install all of the NVIDIA drivers available except the nouveau driver. I tried to add a new mode using Xrandr --newmode / --addmode, but it didn't work; it coudn't detect my output. I'd like to know if this is a known bug and if there's something to do with that. Thanks!

  Read the article

• Optimus Bumblebee Performance

  - by Chance

  After installing Ubuntu 12.04 and Bumblebee, I tested out the performance of the Nvidia card using Minecraft and a few other games. I've noticed it to be way slower than it was on Windows 7. Is this normal? I'm using the GT 630m. From what I've read online, nobody has said it to be slower than Windows. I'm just really curious because I want to use Linux so much more than Windows, but if I don't get the same performance I feel really picky. The Nvidia card is still faster than my Intel graphics on Ubuntu, but it's not as fast as it was for my on Windows. I get 60 - 80 fps on Minecraft on windows, while I get 28 - 48 fps on Ubuntu. Any Ideas why? Thanks so much!

  Read the article

• Monitor Display issue

  - by dsiddens

  When booting I will have to boot maybe 3 or 4 times to get a screen that is not displayed diagonally or is not using the full screen width. Hardware specification: HP s7727c with AMD64 and NVIDIA chipsets and Insignia 22" monitor/TV. The Ubuntu version is 9.10 Karmic. I'd like to stay current with Ubuntu on this machine, but have gone down to 9.10 to get this described functioning. I tried higher versions and could not get past the "black screen" I think this issue is connected to the NVIDIA chipset/driver problem. I am a GUI user and I don't follow the other solutions posted which make use of the command line. I suppose if the command line solution could be given without making any assumptions of the receiving person's knowledge base, then even I and others like me, could implement it. Thank you for your time and assistance. Doug

  Read the article

• GNOME 3.8 stutters / lags

  - by Robin

  I recently installed Fedora 19 beta and noticed unusually laggy behaviour of GNOME Shell (3.8) on the Nouveau driver on a nVidia 9200GS (also with nVidia driver) So I thought this could be related to Fedora so I installed Ubuntu 13.04 which comes with GNOME 3.6. Everything was buttery smooth as it has always been, but once I upgraded GNOME to 3.8, I experience the same laggy performance on Ubuntu as well. I'm talking about the animations, such as the window overview in activities, openSUSE live image with 3.6 = smooth Ubuntu 13.04 live image with 3.6 = smooth Ubuntu 13.04 install with 3.6 = smooth Ubuntu 13.04 install with 3.8 = laggy Fedora live image with 3.8 = laggy Fedora install with 3.8 = laggy Does anyone have a clue what could be going on?

  Read the article

• Bumblebee stopped working after the today's update

  - by renatov

  I've followed this guide to put Bumblebee to work. Everything was working perfect and I was happy playing my Steam games using primusrun to run them. But after today's update, which updated something related to NVIDIA, Bumblebee is not working anymore: $ primusrun glxgears 2014/06/01 02:36:36 socat[4154] E connect(3, AF=1 "/var/run/bumblebee.socket", 27): No such file or directory primus: fatal: failed to connect to Bumblebee daemon: No such file or directory I'm using Ubuntu 14.04, I have an optimus notebook with a dedicated Nvidia GeForce 730M and an integrated Intel card. Could someone help me, please?

  Read the article

• Black frame around screen after HDMI connection failure

  - by Wolter Hellmund

  I was trying to watch a movie in my computer through the TV, so I connected both with an HDMI cable. I was unable to have a successful setup (the colors were all weird on the TV and the screen size, incorrect), I tried many resolutions using the nvidia-settings application and somehow my screen got framed by a black border and after that I have been unable to remove it, even after restarting the computer and not being connected to the HDMI cable anymore. I am using Ubuntu 11.10 amd64, my GPU is an nVidia GeForce 8600M GT and I am using the propietary driver version 280. The problem is due to some setting with my account only. I logged in to the guest session and the resolution is right there. Also, my desktop "thinks" the resolution is right (i.e. 1280x800), but it must be right in another scale because there is pixel area occupied by the black frame.

  Read the article

• Should I switch my graphics mode in the BIOS to avoid using Bumblebee?

  - by Fawkes5

  I have just purchased a Acer 3830TG, the timeline X series. To my surprise I found out that there is no first-party support for nvidia optimus for linux. Bumblebee works great, but the battery life from the graphics card always running is not so great. I don't use linux for games so i don't really need the graphics card on, I have Windows for that. In my bios, I have the ability to change my graphics mode from switchable to integrated. If I do this, reinstall ubuntu, what will happen? Will my nvidia card just turn off? Will everything work properly, as if i'm not running an optimus laptop? Is this recommended as opposed to dealing with bumblebee? What is the best thing I could do?

  Read the article

• Ubuntu 12.04 I'm trying to ugrade my Geforce 8400 to Geforce GTX 560, getting a black screen

  - by Stuart Anderson

  I have an NVidia Geforce 8400 which is working fine in Ubuntu 12.04. I have just purchased an NVidia GeForce GTX 560 and have been trying to install it. No matter what I do all I get is a black screen on boot up. I have tried; 1/ Additional Drivers, driver version 295.40, this works for the GeForce 8400 but gives me a black screen with the GTX 560 when I boot. 2/ Downloaded driver version 295.40 from NVidias site, was able to install it successfully, it works with my 8400 but gives me a black screen with the GTX 560 when I boot. Are there any options I can try?

  Read the article

• How do I turn off the laptop screen while using an external monitor?

  - by jpmelos

  When I close my laptop lid, all my screens are turned off (my laptop screen and my LG M237WA monitor). I'd like to know how do I make it turn off only the laptop screen and keep the monitor on (I want that behaviour for when I want to watch a movie on my monitor and don't want any brightness coming for the laptop screen). I'm using a HP Pavilion dv4-1290br, which comes with a nVidia GeForce 8400M GTS. I'm using the nVidia driver and it's working perfectly. For my X settings, I'm using TwinView, my laptop is set to 1280x800 and my monitor to 1920x1080. I hope you guys can help me, for I couldn't find anything so far. Thank you very much.

  Read the article

• gt 555m instead of gt540m

  - by gangov

  Im gonna be really short. My Acer Aspire 5755G lap top has a Nvidia geforce gt 540m. But when i start lspci | grep VGA it shows me the following: ^[[Agangov@gangov-Aspire-5755G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M] (rev a1) Im really not familiar with the additional drivers in ubuntu. Can somebody tell me what should i do you my VGA properly?? Thank you in advance.

  Read the article

• Problem after last update

  - by bhappy

  I am having a problem after the last update, the booting to command line problem I even can't start in the graphic fail system "xfail": X: cannot stat /etc/X11/X (no such file or directory), aborting I found some one mentioning a solution which is installing ubuntu-dektop though apt-get but it failed due to this error: Unmet dependencies " the dependencies are xserver-xorg-video-all and xserver-xorg-input" Tried to install these first also another dependencies problem. Solutions I tried: removing and installing nvidia driver removing and installing xserver Tried different versions of nvidia including the latest one which is the one I had before the update Any ideas?

  Read the article

• Why does Ubuntu 10.10 show blank screen during startup?

  - by user8372

  When I try to login to Ubuntu 10.10 I get a flickering screen for a second showing - Ubuntu 10.10 ............. and then I get a blank purple coloured screen[Ubuntu's theme colour] which doesn't progress any further Can anybody suggest a remedy to this problem? From whatever questions I searched in various Ubuntu Forums it seems like this problem is likely caused by a missing NVIDIA Display Driver[which is being used in my Sony Vaio Laptop] update in Ubuntu releases If that's the case then how can I update my NVIDIA Display Driver for Ubuntu 10.10 without being able to log into the Ubuntu 10.10?

  Read the article

• EVGA GTX650Ti Boost / Ubuntu 12.04 / 2 X-Star WQHD

  - by user210045

  I bought 2 X-Star WQHD monitors which, predictably, did not work with my on board video card. Yesterday I installed the EVGA card and have been trying to get the NVIDIA drivers to work. I tried to install the 304 .run, I tried to remove that and then install the nvidia-current, then I tried to activate the proprietary driver from within Ubuntu...for the first couple of attempts, I was able to see 800x600 or something close on the X-Star displays but now all I see is flashing colors on those. On my older Samsung monitor (S22B300B 21.5") is still displaying through the EVGA card. Any thoughts on how to go about fixing this?

  Read the article

• Low display resolution under Ubuntu 12.04

  - by Chinouk

  I had some problem after installing new drivers for Nvidia. After having followed the instructions answered to this question, I now only have the Nouveau open-source driver. I can have access to my desktop, but I'm stuck with a 640x480 (4:3) resolution. No other resolution is proposed in the dropdown list of the "Displays" utility. I tried installing the two Nvidia drivers suggested in the "Additional Drivers" utility, but each one broke my display again. Now that I have reverted back to Nouveau again, what should I do to get a higher resolution ?

  Read the article

• How to disable VGA

  - by Bitmap

  If i run lspci | grep VGA I get below output which tells me below VGA cards are present on my computer. 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 08:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) The ES1000 is an onboard card which came with my machine. Do anyone know how to disable this VGA on my machine. The reason for this request is because if I run xrandr I get the output as shown below: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 512x384 57.0 400x300 58.0 320x240 59.0 Which means I am not able to configure nVidia to accept smaller resolution. Thank you.

  Read the article

• W520 External monitor setup with Ubuntu 12.10

  - by user108372

  I just installed a fresh Ubuntu 12.10 64-Bit Desktop on my Lenovo W520. It looks like there are a lot of challenges around making it work with out of the box Nouveau drivers or propriety Nvidia drivers or Intel GPU. I looked at couple of notes on how to make it work with Bumblebee with Optimus Nvidia. None of them seems to work for 12.10. Anybody has a solid answer on this? It seems like a lot of people are suffering from this. Here is my xrandr output. Let me know if you need any additional information. Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 LVDS1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.0*+ 59.9 50.0 1680x1050 60.0 59.9 1600x1024 60.2 1400x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) Thanks, Sef

  Read the article

• optirun fails in Ubuntu 12.10

  - by chiloxsan

  I am trying to use Nvidia Optimus on my laptop by using Bumblebee, I have an Intel Core i5 with an Nvidia Geforce GT 630M. I have followed the instructions on the wiki page at https://wiki.ubuntu.com/Bumblebee, but when trying to run optirun with Firefox (or any other program, like glxspheres), I get the following error: [ 1921.452820] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver [ 1921.452905] [ERROR]Aborting because fallback start is disabled. I have tried googling the issue but I couldn't find any solution that didn't cause more problems. Thank you for your time. Here is my bumblebee.conf: http://paste.ubuntu.com/1333324/

  Read the article

• Dual display setup - only one displayed after logon

  - by oneofthemany

  During boot process my desktop shows both Monitors, but after log I only get one. I'm using Ubuntu 11.10 When I go into Displays its still only shows on Monitor. Here is my graphics card details: 01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device 0405 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at dd000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at de000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at dfe00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia_96, nvidia_173, nouveau, nvidiafb

  Read the article

• 12.04 + Alienware M11x R2 + Bumblebee 3.0 = low resolution only

  - by user89171

  I had a fresh install of Ubuntu 12.04 on my Alienware M11x, and it worked with the native monitor resolution of 1366x768. In trying to get the Optimus chipset working, I installed Bumblebee 3.0. Now, I am only offered 640x480 for my monitor resolution. Graphically, Unity 3D appears to be working now, instead of the Unity 2D I had before, so something went right, but I don't know how I can get it to offer me any higher resolutions than 640x480. I've looked up many pages that address this topic, but nothing that I've seen suggested has worked. sudo add-apt-repository ppa:bumblebee/stable sudo apt-get update sudo apt-get install bumblebee-nvidia was the latest thing I tried. I've tried some variants of this, I've been sure to uninstall nvidia drivers prior to reinstalling Bumblebee and various video drivers. Does anyone have any clue as to how I can get back to native resolution?

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >