Search Results

Search found 1323 results on 53 pages for 'onboard vga'.

Page 34/53 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• My linux server takes more than an hour to boot. Suggestions?

  - by jamieb

  I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

  Read the article

• Laptop and 2 screens: use screens but not monitor display

  - by ClarkeyBoy

  Hi, I have 1 VGA socket on my laptop, and currently have that in use by a large screen. At some point in the future I would like to get another one of these screens and use both screens in dual screen mode but not use my laptop display (to be honest my laptop display is pretty rubbish as its like 2/3s the size of my screen - even if I had the choice to use all 3 I probably wouldn't want to). Is it possible to achieve this? If so, what do I need by way of hardware / software, and how much do you reckon it should cost me? Thanks in advance. Regards, Richard

  Read the article

• Encoding movie files into h264

  - by Shiki

  Found some topics about archiving into h264, but those were about the generic questions (does it worth it, which codec to use.) I want to use h264 (with CUDA (if possible)). So far I only found Avidemux a usable encoder with x264 but it makes an unwatchable video file after the encoding (using the best profile, all setting maxed out), really blurry. Please write down detailed what to use, where to get it (if its free, doesnt matter), what to set, etc. Thanks in advance. (OS: Windows 7 ulti x64, VGA is VP2 capable with CUDA GTX260 XFX) Of course, if there is an up to date duplicate, just comment with the link and I'll remove the question ASAP.

  Read the article

• Diferent keyboard layouts at same time for diferent devices

  - by Joao Carlos

  Hello, I have a MacBook Pro running Snow Leopard, and I am using it was a portable but also desktop computer. In order to acheive this, i bought a VGA adapter and I am using it with an external mouse+keyboard+monitor. The problem is, the external keyboard layout is diferent from the one on the macbook. It is set to US qwerty (its a logitech G15), and because of that, most keys behave diferently from what they are supposed to. Question is, how can I set up diferent layouts at same time for diferent devices? I want US for external keyboard and PT for the default one.

  Read the article

• PC doesn't select right monitor sometimes

  - by Madhur Ahuja

  I have an ACER LCD monitor with Intel G33/G31 display chipset. The preferred resolution for monitor is 1440x900. The drivers for both monitor and display are correctly installed and displayed in Device Manager section. However, I have observed, sometimes, in Display properties, my PC shows Display Device on: VGA instead of Display Device on: Acer , and when that happens, the resolution becomes distorted and I am unable to switch back to 1440x900. However, this problem resolves itself automatically sometimes between reboots. Any idea what's going on ?

  Read the article

• Can Acer Aspire Revo (Atom 330) be used with two monitor dispaly?

  - by LeeD

  I'm so attracted to Acer Revo for the price & the look. As long as I can work on two monitors simultaneously, I'll be happy. Not planning to do heavy video editing or gaming. Occasional movie streaming would be fine. Will mainly use it to do trading, lots of word processing, some photo editing, connecting with friends. Anyone has experience using Revo with 2 or more monitors? The spec says it has VGA and HDMI output but Acer sales person over the phone told me it can support one monitor only..??

  Read the article

• How to Connect Firewire Camcorder to Laptop without firewire port

  - by bdk

  I Have a Sony Camcorder w/ a 4-pin firewire output. I have HP laptop I want to use it with, but the laptop, does not have a firewire port, just VGA, HDMI, USB, ESATA, Ethernet, and Modem. In addition, It doesn't have a PC Card slot for adding a Firewire card. Googling for "Firewire to USB adapter" returns a lot of hits, but no product that seems to do what I want. I assume I need a USB dongle that gives a firewire port and has drivers so that the PC sees it as a regular firewire port. Thanks for any recommendations

  Read the article

• Black stripe appears to the right of the screen, impossible to get rid of

  - by Gabriele Cirulli

  After clicking the "Auto Config" button on my Acer AL2216w screen a stripe appeared on the right of the screen where the screen doesn't "exist" and I can't seem to take the screen viewport back even by using the OCD setting and moving it to the right. The left part of the screen is also hidden and I'm not able to see what's going on there. The PC is connected to the screen through a DVI adapter and a VGA cable. I also use multiple monitors and this is the second monitor. Anyway this seems not to be a related issue, as this used to happen even when I only had a single monitor. I managed to fix this issue once but it was more than two years ago and I can't remember what I did, and out of all of the things I've tried so far (connecting the screen to another PC and performing auto adjustment, switching the cables, etc.) none worked. Here's how it looks: Can anyone help me fix this?

  Read the article

• Virtual PC - Display Issue with Ubuntu Server

  - by Christopher R

  Hi Everyone, I just did a clean install of Ubuntu Server 9.04 in Virtual PC on the Windows 7 RC, and it seems to be having a bit of an issue with the virtual machine's display adapter. I've tried setting a VGA flag in the GRUB configuration to no avail. This is a guess, but I think it has something to do with the color console mode that gets enabled by default at boot time. The system starts booting just fine (i.e. the console looks "normal" when I'm asked to enter an LVM passphrase, etc.), but then the display goes wonky after a few seconds and I end up with this. Typing commands in bash works just fine: it's not like the system is frozen or anything, I just can't see anything that I type. The console looks exactly the way it does in the image below.

  Read the article

• Converting a Full HD Inspiron 9400 laptop LCD to a standalone monitor

  - by jhaukur

  Has anyone tried converting a LCD laptop monitor (17" full HD in this instance) to a stand-alone monitor? Are there any converters that one can buy to send DVI or VGA signals to the plug that is used to connect said LCD to the laptop motherboard? My laptop is the infamous Dell Inspiron 9400 (1705) model. They can have awesome monitors but if you check out ebay, there are many there for sale for little to nothing since the graphic cards fault unsually often in those machines. I'd like to be able to use the LCD and just scrap the rest.

  Read the article

• Incorrect viewport on monitor everytime computer is booted

  - by doldertfo

  Hi, Every time I turn on my PC the viewport isn't aligned correctly on the screen - there is always a black strip on the right hand side. This is not a big issue as it can be resolved by pressing the menu button on the screen and doing a factory reset. However it is irritating having to do it every time. I am using a flat screen monitor with vga connections. The weird thing it never used to happen before with the tower Im using. Is potentially out of date drivers a problem? Thanks.

  Read the article

• Incorrect viewport on monitor everytime computer is booted

  - by dolderto

  Hello, Every time I turn on my PC the viewport isn't aligned correctly on the screen - there is always a black strip on the right hand side. This is not a big issue as it can be resolved by pressing the menu button on the screen and doing a factory reset. However it is irritating having to do it every time. I am using a flat screen monitor with vga connections. The weird thing it never used to happen before with the tower Im using. Is potentially out of date drivers a problem? Thanks.

  Read the article

• HDMI output issue in Ubuntu

  - by xsznix

  Hi, I am using Ubuntu 10.04 on a HP notebook with a nVidia GT 130M graphics card. Whenever I connect a HDTV using the HDMI output and set all of the settings in the nVidia Control Panel, it will output to the HDTV, but cut off about 24 pixels on each side. Sometimes (but not often), it will work properly (display the entire screen), but I cannot get it to work thus consistently. I have tried using resolutions of 1920x1080, 1360x768, 800x600 with two HDTVs of different brands, with and without forcing full GPU scaling, with and without syncing to VBlank (what is this?), etc., and also using a Linux Mint 9 computer with integrated Intel (X4000-ish, don't remember exactly) graphics. The problem persists no matter what, but only with HDMI output (VGA works fine). The same computers works fine with HDTVs in Windows. Any ideas?

  Read the article

• Video issues with old server running Boxee

  - by Skaughty

  I have a old Dell Power Edge 1650 1U rackmount server running Windows XP. Dual 1.3 ghz Processors and 1 GB of RAM. I would like to run Boxee on it, but the 8mb integrated video card will not support it. The font within Boxee just comes up as blocks of color. I have a PCI Radion R9000 dual out video card. However when I plug it in I can not get video signal on any of the VGA outs. Is it possible to upgrade the video card on this old of a server, or is it possible to make it work with the older integrated video?

  Read the article

• Which video types are considered secure/trusted by Windows Vista Media Center?

  - by Page Brooks

  I've been working to set up a Windows Vista Media Center and I noticed that when I play certain DVDs, the video is scrambled. After watching this video, I think it is because Windows Vista considers Component Cables to be untrusted and therefore scrambles the video. The video says that VGA is a trusted video type, but I was curious of which other types are trusted? If I were to use a DVI to HDMI cable, would that be trusted? Edit: Scrambled as in: The video looks like a rainbow checkerboard. The audio plays as expected. I'm using component cables for the connection to my TV.

  Read the article

• Intel video driver upgrade now makes my external monitor display red-only with HDMI cable.

  - by Eli

  I have an HP G60 notebook with a Mobile Intel 4 Series Express Chipset video display (Driver version is 8.15.10.2021). OS is Win7 Home Premium. I also have an LG widescreen display that I was connecting to the laptop using an HDMI cable. It was working great, until I applied an Intel 4 Series Express Chipset update from Windows Update. After the update, if I plug the laptop to the monitor using the HDMI cable, it appears I only get the Magenta channel, cause that is all I see. If I connect with the VGA cable, it works fine. So, is it possible it is just the HDMI cable (which IS cheap in this case - fire sale at Blockbuster), and not related to the video driver update at all?

  Read the article

• 'Game Show' presentation

  - by albatross

  I work at a state university, and every day of summer orientation we have a little jeopardy-like game that new students' parents play. We run it in an auditorium. Right now the game is a powerpoint presentation (set up similar to jeopardy) off an old laptop running Powerpoint 2003. What I want to do is to purchase & use a smaller tablet/mini-book with a touchscreen. The touchscreen would be much more professional than dragging a mouse around the screen to select category questions. I also want to use hot keys during the presentation for sound effects (for correct + incorrect answers), and I want to play music and show an automated slideshow (photos from the day). This device would need vga or hdmi and audio out. I've been looking at iPads and iPad alternatives, but figured someone out there might have a better idea or done this before.

  Read the article

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• Laptop HDMI out to monitor DVI in

  - by Roy Rico

  I have a laptop that i'm trying to fix, and it has HDMI out. I have a cable i bought for my HTPC which does DVI out to HDMI in, which worked fine. Was hoping to be able to use this same cable for HDMI out to DVI in, is it possible? UPDATE: Point of clarification, The laptop's display doesn't work (it was dropped) and I'm trying to figure out what's working and what isn't. in addition to HDMI out, it has VGA out, but that seems to have a short in it, and doesn't display properly (sometimes it works, sometimes, it shows stuff in 256 colors in 800x640). I can tell the LCD screen works (comes on) so i think it's whatever is carrying the data to it that doesn't work. I know more often than know, the display is what breaks... The cable i'm using is a standard HDMI to DVI cable, there are no audio connections or anything. Thanks!

  Read the article

• Mouse Icon Distorted on Secondary Display

  - by Nathan Taylor

  I have a strange issue with a dual monitor, extended desktop setup where the mouse is always fine on the primary monitor, but sometimes when I move to the secondary display the icon becomes garbled and distorted (sometimes it just looks like a vertical line, instead of a pointer). If I move the mouse back and forth rapidly between primary and secondary displays the level of "garbledness" of the icon will change and sometimes go away completely. If I switch the display settings and set it to "Duplicate Monitor 1" then I end up with a garbled icon on the primary display and an accurate one on the secondary. Very annoying. Computer is Windows 7 Ultimate with an HD8750 and the newest video drivers. Monitors are two Dell 24" displays connected via DVI cables. I have also tried VGA cables.

  Read the article

• 3 Monitors 2 different graphic cards

  - by Michael

  I am looking to add a third monitor to my workstation. I currently have 2 monitors connected to a geforce gt 120. I am wanting to find the cheapest solution on adding another monitor, I have a old ati x300 laying around and wanting to know if I would be able to use that to power the other monitor and if it would conflict with my other graphic card (I am not a gamer). What I want to do is have the at x300 power 1 monitor via dvi and the gt 120 power 2 monitors via vga and dvi. Thanks edit: im running windows 7 64bit

  Read the article

• Cheapest server to run Windows 2008 R2?

  - by chopps

  Hey Everyone, I want to build a really cheap server to use for testing etc but don't want to spend alot of dough. Any recomendations on what kind of home pc/server would work for these requirements? Any place to get refurbs at a good price? Component Requirement Processor Minimum: 1.4 GHz (x64 processor) Note: An Intel Itanium 2 processor is required for Windows Server 2008 for Itanium-Based Systems Memory Minimum: 512 MB RAM Maximum: 8 GB (Foundation) or 32 GB (Standard) or 2 TB (Enterprise, Datacenter, and Itanium-Based Systems) Disk Space Requirements Minimum: 32 GB or greater Foundation: 10 GB or greater Note: Computers with more than 16 GB of RAM will require more disk space for paging, hibernation, and dump files Display Super VGA (800 × 600) or higher resolution monitor Other DVD Drive, Keyboard and Microsoft Mouse (or compatible pointing device), Internet access (fees may apply)

  Read the article

• Click sound from computer when shut down

  - by user32569

  Hi, I build my new computer yesterday and I noticed, when computer is shut down, I mean the exact time its looses power from PSU, relativelly loud CLICK sound occurs. Please does anyone knows from where? I think MB, SSD, VGA, CPU nor coolers are not cousing this. I would guess maybe Samsung 1TB HDD (maybe when heads go back to LZ) or some hard safety switch or relay in PSU? Or just the MB speaker? (Yes, its actually installed). Do you have any experience with this? Thanks.

  Read the article

• Getting a black laptop screen

  - by Vivek

  I get a black screen when I boot my laptop. The laptop was in sleep mode initially, so when I pressed the power button, it looked as if it woke up from sleep mode, but the screen was blank. So, I held down the power button to force shutdown the laptop and then removed the battery. But after booting the laptop the screen still remains black. The bios/boot screen remains black as well. I have tried connecting it to external hdmi/vga/s-video devices and booting still no go. Windows loads fine, as I can type the password and get the 'Ding', then alt-f4 and shutdown windows. If it helps, the laptop model is Asus G1S-A1. Thanks in advance!

  Read the article

• How to get HTTP preseed to work correctly on Ubuntu 10.04 LTS (Lucid)?

  - by netvope

  Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >